nix-super/doc/manual/expressions/language-values.xml

<section xmlns="http://docbook.org/ns/docbook"
      xmlns:xlink="http://www.w3.org/1999/xlink"
      xmlns:xi="http://www.w3.org/2001/XInclude"
      version="5.0"
      xml:id='ssec-values'>

<title>Values</title>


<simplesect><title>Simple Values</title>

<para>Nix has the following basic data types:

<itemizedlist>

  <listitem>

    <para><emphasis>Strings</emphasis> can be written in three
    ways.</para>

    <para>The most common way is to enclose the string between double
    quotes, e.g., <literal>"foo bar"</literal>.  Strings can span
    multiple lines.  The special characters <literal>"</literal> and
    <literal>\</literal> and the character sequence
    <literal>${</literal> must be escaped by prefixing them with a
    backslash (<literal>\</literal>).  Newlines, carriage returns and
    tabs can be written as <literal>\n</literal>,
    <literal>\r</literal> and <literal>\t</literal>,
    respectively.</para>

    <para>You can include the result of an expression into a string by
    enclosing it in
    <literal>${<replaceable>...</replaceable>}</literal>, a feature
    known as <emphasis>antiquotation</emphasis>.  The enclosed
    expression must evaluate to something that can be coerced into a
    string (meaning that it must be a string, a path, or a
    derivation).  For instance, rather than writing

<programlisting>
"--with-freetype2-library=" + freetype + "/lib"</programlisting>

    (where <varname>freetype</varname> is a derivation), you can
    instead write the more natural

<programlisting>
"--with-freetype2-library=${freetype}/lib"</programlisting>

    The latter is automatically translated to the former.  A more
    complicated example (from the Nix expression for <link
    xlink:href='http://www.trolltech.com/products/qt'>Qt</link>):

<programlisting>
configureFlags = "
  -system-zlib -system-libpng -system-libjpeg
  ${if openglSupport then "-dlopen-opengl
    -L${mesa}/lib -I${mesa}/include
    -L${libXmu}/lib -I${libXmu}/include" else ""}
  ${if threadSupport then "-thread" else "-no-thread"}
";</programlisting>

    Note that Nix expressions and strings can be arbitrarily nested;
    in this case the outer string contains various antiquotations that
    themselves contain strings (e.g., <literal>"-thread"</literal>),
    some of which in turn contain expressions (e.g.,
    <literal>${mesa}</literal>).</para>

    <para>The second way to write string literals is as an
    <emphasis>indented string</emphasis>, which is enclosed between
    pairs of <emphasis>double single-quotes</emphasis>, like so:

<programlisting>
''
  This is the first line.
  This is the second line.
    This is the third line.
''</programlisting>

    This kind of string literal intelligently strips indentation from
    the start of each line.  To be precise, it strips from each line a
    number of spaces equal to the minimal indentation of the string as
    a whole (disregarding the indentation of empty lines).  For
    instance, the first and second line are indented two space, while
    the third line is indented four spaces.  Thus, two spaces are
    stripped from each line, so the resulting string is

<programlisting>
"This is the first line.\nThis is the second line.\n  This is the third line.\n"</programlisting>

    </para>

    <para>Note that the whitespace and newline following the opening
    <literal>''</literal> is ignored if there is no non-whitespace
    text on the initial line.</para>

    <para>Antiquotation
    (<literal>${<replaceable>expr</replaceable>}</literal>) is
    supported in indented strings.</para>

    <para>Since <literal>${</literal> and <literal>''</literal> have
    special meaning in indented strings, you need a way to quote them.
    <literal>${</literal> can be escaped by prefixing it with
    <literal>''</literal> (that is, two single quotes), i.e.,
    <literal>''${</literal>.  <literal>''</literal> can be escaped by
    prefixing it with <literal>'</literal>, i.e.,
    <literal>'''</literal>.  Finally, linefeed, carriage-return and
    tab characters can be written as <literal>''\n</literal>,
    <literal>''\r</literal>, <literal>''\t</literal>.</para>

    <para>Indented strings are primarily useful in that they allow
    multi-line string literals to follow the indentation of the
    enclosing Nix expression, and that less escaping is typically
    necessary for strings representing languages such as shell scripts
    and configuration files because <literal>''</literal> is much less
    common than <literal>"</literal>.  Example:

<programlisting>
stdenv.mkDerivation {
  <replaceable>...</replaceable>
  postInstall =
    ''
      mkdir $out/bin $out/etc
      cp foo $out/bin
      echo "Hello World" > $out/etc/foo.conf
      ${if enableBar then "cp bar $out/bin" else ""}
    '';
  <replaceable>...</replaceable>
}
</programlisting>

    </para>

    <para>Finally, as a convenience, <emphasis>URIs</emphasis> as
    defined in appendix B of <link
    xlink:href='http://www.ietf.org/rfc/rfc2396.txt'>RFC 2396</link>
    can be written <emphasis>as is</emphasis>, without quotes.  For
    instance, the string
    <literal>"http://example.org/foo.tar.bz2"</literal>
    can also be written as
    <literal>http://example.org/foo.tar.bz2</literal>.</para>

  </listitem>

  <listitem><para><emphasis>Integers</emphasis>, e.g.,
  <literal>123</literal>.</para></listitem>

  <listitem><para><emphasis>Paths</emphasis>, e.g.,
  <filename>/bin/sh</filename> or <filename>./builder.sh</filename>.
  A path must contain at least one slash to be recognised as such; for
  instance, <filename>builder.sh</filename> is not a
  path<footnote><para>It's parsed as an expression that selects the
  attribute <varname>sh</varname> from the variable
  <varname>builder</varname>.</para></footnote>.  If the file name is
  relative, i.e., if it does not begin with a slash, it is made
  absolute at parse time relative to the directory of the Nix
  expression that contained it.  For instance, if a Nix expression in
  <filename>/foo/bar/bla.nix</filename> refers to
  <filename>../xyzzy/fnord.nix</filename>, the absolute path is
  <filename>/foo/xyzzy/fnord.nix</filename>.</para></listitem>

  <listitem><para><emphasis>Booleans</emphasis> with values
  <literal>true</literal> and
  <literal>false</literal>.</para></listitem>

  <listitem><para>The null value, denoted as
  <literal>null</literal>.</para></listitem>

</itemizedlist>

</para>

</simplesect>


<simplesect><title>Lists</title>

<para>Lists are formed by enclosing a whitespace-separated list of
values between square brackets.  For example,

<programlisting>
[ 123 ./foo.nix "abc" (f { x = y; }) ]</programlisting>

defines a list of four elements, the last being the result of a call
to the function <varname>f</varname>.  Note that function calls have
to be enclosed in parentheses.  If they had been omitted, e.g.,

<programlisting>
[ 123 ./foo.nix "abc" f { x = y; } ]</programlisting>

the result would be a list of five elements, the fourth one being a
function and the fifth being a set.</para>

</simplesect>


<simplesect><title>Sets</title>

<para>Sets are really the core of the language, since ultimately the
Nix language is all about creating derivations, which are really just
sets of attributes to be passed to build scripts.</para>

<para>Sets are just a list of name/value pairs (called
<emphasis>attributes</emphasis>) enclosed in curly brackets, where
each value is an arbitrary expression terminated by a semicolon.  For
example:

<programlisting>
{ x = 123;
  text = "Hello";
  y = f { bla = 456; };
}</programlisting>

This defines a set with attributes named <varname>x</varname>,
<varname>text</varname>, <varname>y</varname>.  The order of the
attributes is irrelevant.  An attribute name may only occur
once.</para>

<para>Attributes can be selected from a set using the
<literal>.</literal> operator.  For instance,

<programlisting>
{ a = "Foo"; b = "Bar"; }.a</programlisting>

evaluates to <literal>"Foo"</literal>.  It is possible to provide a
default value in an attribute selection using the
<literal>or</literal> keyword.  For example,

<programlisting>
{ a = "Foo"; b = "Bar"; }.c or "Xyzzy"</programlisting>

will evaluate to <literal>"Xyzzy"</literal> because there is no
<varname>c</varname> attribute in the set.</para>

<para>You can use arbitrary double-quoted strings as attribute
names:

<programlisting>
{ "foo ${bar}" = 123; "nix-1.0" = 456; }."foo ${bar}"
</programlisting>

This will evaluate to <literal>123</literal> (Assuming
<literal>bar</literal> is antiquotable). In the case where an
attribute name is just a single antiquotation, the quotes can be
dropped:

<programlisting>
{ foo = 123; }.${bar} or 456 </programlisting>

This will evaluate to <literal>123</literal> if
<literal>bar</literal> evaluates to <literal>"foo"</literal> when
coerced to a string and <literal>456</literal> otherwise (again
assuming <literal>bar</literal> is antiquotable).</para>

<para>In the special case where an attribute name inside of a set declaration
evaluates to <literal>null</literal> (which is normally an error, as
<literal>null</literal> is not antiquotable), that attribute is simply not
added to the set:

<programlisting>
{ ${if foo then "bar" else null} = true; }</programlisting>

This will evaluate to <literal>{}</literal> if <literal>foo</literal>
evaluates to <literal>false</literal>.</para>


</simplesect>


</section>