Merge branch 'master' into read-only-local-store

doc/manual/src/advanced-topics/diff-hook.md

@@ -48,13 +48,13 @@ If the build passes and is deterministic, Nix will exit with a status
 code of 0:
 
 ```console
-$ nix-build ./deterministic.nix -A stable
+$ nix-build ./deterministic.nix --attr stable
 this derivation will be built:
   /nix/store/z98fasz2jqy9gs0xbvdj939p27jwda38-stable.drv
 building '/nix/store/z98fasz2jqy9gs0xbvdj939p27jwda38-stable.drv'...
 /nix/store/yyxlzw3vqaas7wfp04g0b1xg51f2czgq-stable
 
-$ nix-build ./deterministic.nix -A stable --check
+$ nix-build ./deterministic.nix --attr stable --check
 checking outputs of '/nix/store/z98fasz2jqy9gs0xbvdj939p27jwda38-stable.drv'...
 /nix/store/yyxlzw3vqaas7wfp04g0b1xg51f2czgq-stable
 ```
@@ -63,13 +63,13 @@ If the build is not deterministic, Nix will exit with a status code of
 1:
 
 ```console
-$ nix-build ./deterministic.nix -A unstable
+$ nix-build ./deterministic.nix --attr unstable
 this derivation will be built:
   /nix/store/cgl13lbj1w368r5z8gywipl1ifli7dhk-unstable.drv
 building '/nix/store/cgl13lbj1w368r5z8gywipl1ifli7dhk-unstable.drv'...
 /nix/store/krpqk0l9ib0ibi1d2w52z293zw455cap-unstable
 
-$ nix-build ./deterministic.nix -A unstable --check
+$ nix-build ./deterministic.nix --attr unstable --check
 checking outputs of '/nix/store/cgl13lbj1w368r5z8gywipl1ifli7dhk-unstable.drv'...
 error: derivation '/nix/store/cgl13lbj1w368r5z8gywipl1ifli7dhk-unstable.drv' may
 not be deterministic: output '/nix/store/krpqk0l9ib0ibi1d2w52z293zw455cap-unstable' differs
@@ -89,7 +89,7 @@ Using `--check` with `--keep-failed` will cause Nix to keep the second
 build's output in a special, `.check` path:
 
 ```console
-$ nix-build ./deterministic.nix -A unstable --check --keep-failed
+$ nix-build ./deterministic.nix --attr unstable --check --keep-failed
 checking outputs of '/nix/store/cgl13lbj1w368r5z8gywipl1ifli7dhk-unstable.drv'...
 note: keeping build directory '/tmp/nix-build-unstable.drv-0'
 error: derivation '/nix/store/cgl13lbj1w368r5z8gywipl1ifli7dhk-unstable.drv' may

doc/manual/src/advanced-topics/post-build-hook.md

@@ -90,7 +90,7 @@ Then, restart the `nix-daemon`.
 Build any derivation, for example:
 
 ```console
-$ nix-build -E '(import <nixpkgs> {}).writeText "example" (builtins.toString builtins.currentTime)'
+$ nix-build --expr '(import <nixpkgs> {}).writeText "example" (builtins.toString builtins.currentTime)'
 this derivation will be built:
   /nix/store/s4pnfbkalzy5qz57qs6yybna8wylkig6-example.drv
 building '/nix/store/s4pnfbkalzy5qz57qs6yybna8wylkig6-example.drv'...

doc/manual/src/command-ref/nix-build.md

@@ -76,7 +76,7 @@ except for `--arg` and `--attr` / `-A` which are passed to `nix-instantiate`.
 # Examples
 
 ```console
-$ nix-build '<nixpkgs>' -A firefox
+$ nix-build '<nixpkgs>' --attr firefox
 store derivation is /nix/store/qybprl8sz2lc...-firefox-1.5.0.7.drv
 /nix/store/d18hyl92g30l...-firefox-1.5.0.7
 
@@ -91,7 +91,7 @@ If a derivation has multiple outputs, `nix-build` will build the default
 (first) output. You can also build all outputs:
 
 ```console
-$ nix-build '<nixpkgs>' -A openssl.all
+$ nix-build '<nixpkgs>' --attr openssl.all
 ```
 
 This will create a symlink for each output named `result-outputname`.
@@ -101,7 +101,7 @@ outputs `out`, `bin` and `man`, `nix-build` will create symlinks
 specific output:
 
 ```console
-$ nix-build '<nixpkgs>' -A openssl.man
+$ nix-build '<nixpkgs>' --attr openssl.man
 ```
 
 This will create a symlink `result-man`.
@@ -109,7 +109,7 @@ This will create a symlink `result-man`.
 Build a Nix expression given on the command line:
 
 ```console
-$ nix-build -E 'with import <nixpkgs> { }; runCommand "foo" { } "echo bar > $out"'
+$ nix-build --expr 'with import <nixpkgs> { }; runCommand "foo" { } "echo bar > $out"'
 $ cat ./result
 bar
 ```
@@ -118,5 +118,5 @@ Build the GNU Hello package from the latest revision of the master
 branch of Nixpkgs:
 
 ```console
-$ nix-build https://github.com/NixOS/nixpkgs/archive/master.tar.gz -A hello
+$ nix-build https://github.com/NixOS/nixpkgs/archive/master.tar.gz --attr hello
 ```

doc/manual/src/command-ref/nix-channel.md

@@ -52,6 +52,12 @@ The list of subscribed channels is stored in `~/.nix-channels`.
 
 {{#include ./env-common.md}}
 
+# Files
+
+`nix-channel` operates on the following files.
+
+{{#include ./files/channels.md}}
+
 # Examples
 
 To subscribe to the Nixpkgs channel and install the GNU Hello package:
@@ -59,18 +65,18 @@ To subscribe to the Nixpkgs channel and install the GNU Hello package:
 ```console
 $ nix-channel --add https://nixos.org/channels/nixpkgs-unstable
 $ nix-channel --update
-$ nix-env -iA nixpkgs.hello
+$ nix-env --install --attr nixpkgs.hello
 ```
 
 You can revert channel updates using `--rollback`:
 
 ```console
-$ nix-instantiate --eval -E '(import <nixpkgs> {}).lib.version'
+$ nix-instantiate --eval --expr '(import <nixpkgs> {}).lib.version'
 "14.04.527.0e935f1"
 
 $ nix-channel --rollback
 switching from generation 483 to 482
 
-$ nix-instantiate --eval -E '(import <nixpkgs> {}).lib.version'
+$ nix-instantiate --eval --expr '(import <nixpkgs> {}).lib.version'
 "14.04.526.dbadfad"
 ```

doc/manual/src/command-ref/nix-copy-closure.md

@@ -87,5 +87,5 @@ environment:
 ```console
 $ nix-copy-closure --from alice@itchy.labs \
     /nix/store/0dj0503hjxy5mbwlafv1rsbdiyx1gkdy-subversion-1.4.4
-$ nix-env -i /nix/store/0dj0503hjxy5mbwlafv1rsbdiyx1gkdy-subversion-1.4.4
+$ nix-env --install /nix/store/0dj0503hjxy5mbwlafv1rsbdiyx1gkdy-subversion-1.4.4
 ```

doc/manual/src/command-ref/nix-env.md

@@ -49,7 +49,7 @@ These pages can be viewed offline:
 
 # Selectors
 
-Several commands, such as `nix-env -q` and `nix-env -i`, take a list of
+Several commands, such as `nix-env --query ` and `nix-env --install `, take a list of
 arguments that specify the packages on which to operate. These are
 extended regular expressions that must match the entire name of the
 package. (For details on regular expressions, see **regex**(7).) The match is
@@ -83,6 +83,8 @@ match. Here are some examples:
 
 # Files
 
+`nix-env` operates on the following files.
+
 {{#include ./files/default-nix-expression.md}}
 
 {{#include ./files/profiles.md}}

doc/manual/src/command-ref/nix-env/delete-generations.md

@@ -41,6 +41,6 @@ $ nix-env --delete-generations 30d
 ```
 
 ```console
-$ nix-env -p other_profile --delete-generations old
+$ nix-env --profile other_profile --delete-generations old
 ```
 

doc/manual/src/command-ref/nix-env/install.md

@@ -36,7 +36,7 @@ a number of possible ways:
     then the derivation with the highest version will be installed.
 
     You can force the installation of multiple derivations with the same
-    name by being specific about the versions. For instance, `nix-env -i
+    name by being specific about the versions. For instance, `nix-env --install
     gcc-3.3.6 gcc-4.1.1` will install both version of GCC (and will
     probably cause a user environment conflict\!).
 
@@ -44,7 +44,7 @@ a number of possible ways:
     paths* that select attributes from the top-level Nix
     expression. This is faster than using derivation names and
     unambiguous. To find out the attribute paths of available
-    packages, use `nix-env -qaP`.
+    packages, use `nix-env --query --available --attr-path `.
 
   - If `--from-profile` *path* is given, *args* is a set of names
     denoting installed store paths in the profile *path*. This is an
@@ -87,7 +87,7 @@ a number of possible ways:
 
   - `--remove-all` / `-r`\
     Remove all previously installed packages first. This is equivalent
-    to running `nix-env -e '.*'` first, except that everything happens
+    to running `nix-env --uninstall '.*'` first, except that everything happens
     in a single transaction.
 
 {{#include ./opt-common.md}}
@@ -103,9 +103,9 @@ a number of possible ways:
 To install a package using a specific attribute path from the active Nix expression:
 
 ```console
-$ nix-env -iA gcc40mips
+$ nix-env --install --attr gcc40mips
 installing `gcc-4.0.2'
-$ nix-env -iA xorg.xorgserver
+$ nix-env --install --attr xorg.xorgserver
 installing `xorg-server-1.2.0'
 ```
 
@@ -133,32 +133,32 @@ installing `gcc-3.3.2'
 To install all derivations in the Nix expression `foo.nix`:
 
 ```console
-$ nix-env -f ~/foo.nix -i '.*'
+$ nix-env --file ~/foo.nix --install '.*'
 ```
 
 To copy the store path with symbolic name `gcc` from another profile:
 
 ```console
-$ nix-env -i --from-profile /nix/var/nix/profiles/foo gcc
+$ nix-env --install --from-profile /nix/var/nix/profiles/foo gcc
 ```
 
 To install a specific [store derivation] (typically created by
 `nix-instantiate`):
 
 ```console
-$ nix-env -i /nix/store/fibjb1bfbpm5mrsxc4mh2d8n37sxh91i-gcc-3.4.3.drv
+$ nix-env --install /nix/store/fibjb1bfbpm5mrsxc4mh2d8n37sxh91i-gcc-3.4.3.drv
 ```
 
 To install a specific output path:
 
 ```console
-$ nix-env -i /nix/store/y3cgx0xj1p4iv9x0pnnmdhr8iyg741vk-gcc-3.4.3
+$ nix-env --install /nix/store/y3cgx0xj1p4iv9x0pnnmdhr8iyg741vk-gcc-3.4.3
 ```
 
 To install from a Nix expression specified on the command-line:
 
 ```console
-$ nix-env -f ./foo.nix -i -E \
+$ nix-env --file ./foo.nix --install --expr \
     'f: (f {system = "i686-linux";}).subversionWithJava'
 ```
 
@@ -170,7 +170,7 @@ function defined in `./foo.nix`.
 A dry-run tells you which paths will be downloaded or built from source:
 
 ```console
-$ nix-env -f '<nixpkgs>' -iA hello --dry-run
+$ nix-env --file '<nixpkgs>' --install --attr hello --dry-run
 (dry run; not doing anything)
 installing ‘hello-2.10’
 this path will be fetched (0.04 MiB download, 0.19 MiB unpacked):
@@ -182,6 +182,6 @@ To install Firefox from the latest revision in the Nixpkgs/NixOS 14.12
 channel:
 
 ```console
-$ nix-env -f https://github.com/NixOS/nixpkgs/archive/nixos-14.12.tar.gz -iA firefox
+$ nix-env --file https://github.com/NixOS/nixpkgs/archive/nixos-14.12.tar.gz --install --attr firefox
 ```
 

doc/manual/src/command-ref/nix-env/query.md

@@ -137,7 +137,7 @@ derivation is shown unless `--no-name` is specified.
 To show installed packages:
 
 ```console
-$ nix-env -q
+$ nix-env --query
 bison-1.875c
 docbook-xml-4.2
 firefox-1.0.4
@@ -149,7 +149,7 @@ ORBit2-2.8.3
 To show available packages:
 
 ```console
-$ nix-env -qa
+$ nix-env --query --available
 firefox-1.0.7
 GConf-2.4.0.1
 MPlayer-1.0pre7
@@ -160,7 +160,7 @@ ORBit2-2.8.3
 To show the status of available packages:
 
 ```console
-$ nix-env -qas
+$ nix-env --query --available --status
 -P- firefox-1.0.7   (not installed but present)
 --S GConf-2.4.0.1   (not present, but there is a substitute for fast installation)
 --S MPlayer-1.0pre3 (i.e., this is not the installed MPlayer, even though the version is the same!)
@@ -171,14 +171,14 @@ IP- ORBit2-2.8.3    (installed and by definition present)
 To show available packages in the Nix expression `foo.nix`:
 
 ```console
-$ nix-env -f ./foo.nix -qa
+$ nix-env --file ./foo.nix --query --available
 foo-1.2.3
 ```
 
 To compare installed versions to what’s available:
 
 ```console
-$ nix-env -qc
+$ nix-env --query --compare-versions
 ...
 acrobat-reader-7.0 - ?      (package is not available at all)
 autoconf-2.59      = 2.59   (same version)
@@ -189,7 +189,7 @@ firefox-1.0.4      < 1.0.7  (a more recent version is available)
 To show all packages with “`zip`” in the name:
 
 ```console
-$ nix-env -qa '.*zip.*'
+$ nix-env --query --available '.*zip.*'
 bzip2-1.0.6
 gzip-1.6
 zip-3.0
@@ -199,7 +199,7 @@ zip-3.0
 To show all packages with “`firefox`” or “`chromium`” in the name:
 
 ```console
-$ nix-env -qa '.*(firefox|chromium).*'
+$ nix-env --query --available '.*(firefox|chromium).*'
 chromium-37.0.2062.94
 chromium-beta-38.0.2125.24
 firefox-32.0.3
@@ -210,6 +210,6 @@ firefox-with-plugins-13.0.1
 To show all packages in the latest revision of the Nixpkgs repository:
 
 ```console
-$ nix-env -f https://github.com/NixOS/nixpkgs/archive/master.tar.gz -qa
+$ nix-env --file https://github.com/NixOS/nixpkgs/archive/master.tar.gz --query --available
 ```
 

doc/manual/src/command-ref/nix-env/set-flag.md

@@ -46,16 +46,16 @@ To prevent the currently installed Firefox from being upgraded:
 $ nix-env --set-flag keep true firefox
 ```
 
-After this, `nix-env -u` will ignore Firefox.
+After this, `nix-env --upgrade ` will ignore Firefox.
 
 To disable the currently installed Firefox, then install a new Firefox
 while the old remains part of the profile:
 
 ```console
-$ nix-env -q
+$ nix-env --query
 firefox-2.0.0.9 (the current one)
 
-$ nix-env --preserve-installed -i firefox-2.0.0.11
+$ nix-env --preserve-installed --install firefox-2.0.0.11
 installing `firefox-2.0.0.11'
 building path(s) `/nix/store/myy0y59q3ig70dgq37jqwg1j0rsapzsl-user-environment'
 collision between `/nix/store/...-firefox-2.0.0.11/bin/firefox'
@@ -65,10 +65,10 @@ collision between `/nix/store/...-firefox-2.0.0.11/bin/firefox'
 $ nix-env --set-flag active false firefox
 setting flag on `firefox-2.0.0.9'
 
-$ nix-env --preserve-installed -i firefox-2.0.0.11
+$ nix-env --preserve-installed --install firefox-2.0.0.11
 installing `firefox-2.0.0.11'
 
-$ nix-env -q
+$ nix-env --query
 firefox-2.0.0.11 (the enabled one)
 firefox-2.0.0.9 (the disabled one)
 ```

doc/manual/src/command-ref/nix-env/set.md

@@ -25,6 +25,6 @@ The following updates a profile such that its current generation will
 contain just Firefox:
 
 ```console
-$ nix-env -p /nix/var/nix/profiles/browser --set firefox
+$ nix-env --profile /nix/var/nix/profiles/browser --set firefox
 ```
 

doc/manual/src/command-ref/nix-env/switch-generation.md

@@ -27,7 +27,7 @@ Switching will fail if the specified generation does not exist.
 # Examples
 
 ```console
-$ nix-env -G 42
+$ nix-env --switch-generation 42
 switching from generation 50 to 42
 ```
 

doc/manual/src/command-ref/nix-env/switch-profile.md

@@ -22,5 +22,5 @@ the symlink `~/.nix-profile` is made to point to *path*.
 # Examples
 
 ```console
-$ nix-env -S ~/my-profile
+$ nix-env --switch-profile ~/my-profile
 ```

doc/manual/src/command-ref/nix-env/uninstall.md

@@ -24,5 +24,5 @@ designated by the symbolic names *drvnames* are removed.
 
 ```console
 $ nix-env --uninstall gcc
-$ nix-env -e '.*' (remove everything)
+$ nix-env --uninstall '.*' (remove everything)
 ```

doc/manual/src/command-ref/nix-env/upgrade.md

@@ -76,21 +76,21 @@ version is installed.
 # Examples
 
 ```console
-$ nix-env --upgrade -A nixpkgs.gcc
+$ nix-env --upgrade --attr nixpkgs.gcc
 upgrading `gcc-3.3.1' to `gcc-3.4'
 ```
 
 When there are no updates available, nothing will happen:
 
 ```console
-$ nix-env --upgrade -A nixpkgs.pan
+$ nix-env --upgrade --attr nixpkgs.pan
 ```
 
 Using `-A` is preferred when possible, as it is faster and unambiguous but
 it is also possible to upgrade to a specific version by matching the derivation name:
 
 ```console
-$ nix-env -u gcc-3.3.2 --always
+$ nix-env --upgrade gcc-3.3.2 --always
 upgrading `gcc-3.4' to `gcc-3.3.2'
 ```
 
@@ -98,7 +98,7 @@ To try to upgrade everything
 (matching packages based on the part of the derivation name without version):
 
 ```console
-$ nix-env -u
+$ nix-env --upgrade
 upgrading `hello-2.1.2' to `hello-2.1.3'
 upgrading `mozilla-1.2' to `mozilla-1.4'
 ```

doc/manual/src/command-ref/nix-instantiate.md

@@ -88,7 +88,7 @@ Instantiate [store derivation]s from a Nix expression, and build them using `nix
 $ nix-instantiate test.nix (instantiate)
 /nix/store/cigxbmvy6dzix98dxxh9b6shg7ar5bvs-perl-BerkeleyDB-0.26.drv
 
-$ nix-store -r $(nix-instantiate test.nix) (build)
+$ nix-store --realise $(nix-instantiate test.nix) (build)
 ...
 /nix/store/qhqk4n8ci095g3sdp93x7rgwyh9rdvgk-perl-BerkeleyDB-0.26 (output path)
 
@@ -100,30 +100,30 @@ dr-xr-xr-x    2 eelco    users        4096 1970-01-01 01:00 lib
 You can also give a Nix expression on the command line:
 
 ```console
-$ nix-instantiate -E 'with import <nixpkgs> { }; hello'
+$ nix-instantiate --expr 'with import <nixpkgs> { }; hello'
 /nix/store/j8s4zyv75a724q38cb0r87rlczaiag4y-hello-2.8.drv
 ```
 
 This is equivalent to:
 
 ```console
-$ nix-instantiate '<nixpkgs>' -A hello
+$ nix-instantiate '<nixpkgs>' --attr hello
 ```
 
 Parsing and evaluating Nix expressions:
 
 ```console
-$ nix-instantiate --parse -E '1 + 2'
+$ nix-instantiate --parse --expr '1 + 2'
 1 + 2
 ```
 
 ```console
-$ nix-instantiate --eval -E '1 + 2'
+$ nix-instantiate --eval --expr '1 + 2'
 3
 ```
 
 ```console
-$ nix-instantiate --eval --xml -E '1 + 2'
+$ nix-instantiate --eval --xml --expr '1 + 2'
 <?xml version='1.0' encoding='utf-8'?>
 <expr>
   <int value="3" />
@@ -133,7 +133,7 @@ $ nix-instantiate --eval --xml -E '1 + 2'
 The difference between non-strict and strict evaluation:
 
 ```console
-$ nix-instantiate --eval --xml -E 'rec { x = "foo"; y = x; }'
+$ nix-instantiate --eval --xml --expr 'rec { x = "foo"; y = x; }'
 ...
   <attr name="x">
     <string value="foo" />
@@ -148,7 +148,7 @@ Note that `y` is left unevaluated (the XML representation doesn’t
 attempt to show non-normal forms).
 
 ```console
-$ nix-instantiate --eval --xml --strict -E 'rec { x = "foo"; y = x; }'
+$ nix-instantiate --eval --xml --strict --expr 'rec { x = "foo"; y = x; }'
 ...
   <attr name="x">
     <string value="foo" />

doc/manual/src/command-ref/nix-shell.md

@@ -89,7 +89,7 @@ All options not listed here are passed to `nix-store
   - `--packages` / `-p` *packages*…\
     Set up an environment in which the specified packages are present.
     The command line arguments are interpreted as attribute names inside
-    the Nix Packages collection. Thus, `nix-shell -p libjpeg openjdk`
+    the Nix Packages collection. Thus, `nix-shell --packages libjpeg openjdk`
     will start a shell in which the packages denoted by the attribute
     names `libjpeg` and `openjdk` are present.
 
@@ -118,7 +118,7 @@ To build the dependencies of the package Pan, and start an interactive
 shell in which to build it:
 
 ```console
-$ nix-shell '<nixpkgs>' -A pan
+$ nix-shell '<nixpkgs>' --attr pan
 [nix-shell]$ eval ${unpackPhase:-unpackPhase}
 [nix-shell]$ cd $sourceRoot
 [nix-shell]$ eval ${patchPhase:-patchPhase}
@@ -137,7 +137,7 @@ To clear the environment first, and do some additional automatic
 initialisation of the interactive shell:
 
 ```console
-$ nix-shell '<nixpkgs>' -A pan --pure \
+$ nix-shell '<nixpkgs>' --attr pan --pure \
     --command 'export NIX_DEBUG=1; export NIX_CORES=8; return'
 ```
 
@@ -146,13 +146,13 @@ Nix expressions can also be given on the command line using the `-E` and
 packages `sqlite` and `libX11`:
 
 ```console
-$ nix-shell -E 'with import <nixpkgs> { }; runCommand "dummy" { buildInputs = [ sqlite xorg.libX11 ]; } ""'
+$ nix-shell --expr 'with import <nixpkgs> { }; runCommand "dummy" { buildInputs = [ sqlite xorg.libX11 ]; } ""'
 ```
 
 A shorter way to do the same is:
 
 ```console
-$ nix-shell -p sqlite xorg.libX11
+$ nix-shell --packages sqlite xorg.libX11
 [nix-shell]$ echo $NIX_LDFLAGS
 … -L/nix/store/j1zg5v…-sqlite-3.8.0.2/lib -L/nix/store/0gmcz9…-libX11-1.6.1/lib …
 ```
@@ -162,7 +162,7 @@ the `buildInputs = [ ... ]` shown above, not only package names. So the
 following is also legal:
 
 ```console
-$ nix-shell -p sqlite 'git.override { withManual = false; }'
+$ nix-shell --packages sqlite 'git.override { withManual = false; }'
 ```
 
 The `-p` flag looks up Nixpkgs in the Nix search path. You can override
@@ -171,7 +171,7 @@ gives you a shell containing the Pan package from a specific revision of
 Nixpkgs:
 
 ```console
-$ nix-shell -p pan -I nixpkgs=https://github.com/NixOS/nixpkgs/archive/8a3eea054838b55aca962c3fbde9c83c102b8bf2.tar.gz
+$ nix-shell --packages pan -I nixpkgs=https://github.com/NixOS/nixpkgs/archive/8a3eea054838b55aca962c3fbde9c83c102b8bf2.tar.gz
 
 [nix-shell:~]$ pan --version
 Pan 0.139
@@ -185,7 +185,7 @@ done by starting the script with the following lines:
 
 ```bash
 #! /usr/bin/env nix-shell
-#! nix-shell -i real-interpreter -p packages
+#! nix-shell -i real-interpreter --packages packages
 ```
 
 where *real-interpreter* is the “real” script interpreter that will be
@@ -202,7 +202,7 @@ For example, here is a Python script that depends on Python and the
 
 ```python
 #! /usr/bin/env nix-shell
-#! nix-shell -i python -p python pythonPackages.prettytable
+#! nix-shell -i python --packages python pythonPackages.prettytable
 
 import prettytable
 
@@ -217,7 +217,7 @@ requires Perl and the `HTML::TokeParser::Simple` and `LWP` packages:
 
 ```perl
 #! /usr/bin/env nix-shell
-#! nix-shell -i perl -p perl perlPackages.HTMLTokeParserSimple perlPackages.LWP
+#! nix-shell -i perl --packages perl perlPackages.HTMLTokeParserSimple perlPackages.LWP
 
 use HTML::TokeParser::Simple;
 
@@ -235,7 +235,7 @@ package like Terraform:
 
 ```bash
 #! /usr/bin/env nix-shell
-#! nix-shell -i bash -p "terraform.withPlugins (plugins: [ plugins.openstack ])"
+#! nix-shell -i bash --packages "terraform.withPlugins (plugins: [ plugins.openstack ])"
 
 terraform apply
 ```
@@ -251,7 +251,7 @@ branch):
 
 ```haskell
 #! /usr/bin/env nix-shell
-#! nix-shell -i runghc -p "haskellPackages.ghcWithPackages (ps: [ps.download-curl ps.tagsoup])"
+#! nix-shell -i runghc --packages "haskellPackages.ghcWithPackages (ps: [ps.download-curl ps.tagsoup])"
 #! nix-shell -I nixpkgs=https://github.com/NixOS/nixpkgs/archive/nixos-20.03.tar.gz
 
 import Network.Curl.Download

doc/manual/src/command-ref/nix-store/dump.md

@@ -23,7 +23,7 @@ produce the same NAR archive. For instance, directory entries are
 always sorted so that the actual on-disk order doesn’t influence the
 result.  This means that the cryptographic hash of a NAR dump of a
 path is usable as a fingerprint of the contents of the path. Indeed,
-the hashes of store paths stored in Nix’s database (see `nix-store -q
+the hashes of store paths stored in Nix’s database (see `nix-store --query
 --hash`) are SHA-256 hashes of the NAR dump of each store path.
 
 NAR archives support filenames of unlimited length and 64-bit file

doc/manual/src/command-ref/nix-store/export.md

@@ -31,7 +31,7 @@ To copy a whole closure, do something
 like:
 
 ```console
-$ nix-store --export $(nix-store -qR paths) > out
+$ nix-store --export $(nix-store --query --requisites paths) > out
 ```
 
 To import the whole closure again, run:

doc/manual/src/command-ref/nix-store/opt-common.md

@@ -11,7 +11,7 @@ The following options are allowed for all `nix-store` operations, but may not al
   be created in `/nix/var/nix/gcroots/auto/`. For instance,
 
   ```console
-  $ nix-store --add-root /home/eelco/bla/result -r ...
+  $ nix-store --add-root /home/eelco/bla/result --realise ...
 
   $ ls -l /nix/var/nix/gcroots/auto
   lrwxrwxrwx    1 ... 2005-03-13 21:10 dn54lcypm8f8... -> /home/eelco/bla/result

doc/manual/src/command-ref/nix-store/query.md

@@ -145,7 +145,7 @@ Print the closure (runtime dependencies) of the `svn` program in the
 current user environment:
 
 ```console
-$ nix-store -qR $(which svn)
+$ nix-store --query --requisites $(which svn)
 /nix/store/5mbglq5ldqld8sj57273aljwkfvj22mc-subversion-1.1.4
 /nix/store/9lz9yc6zgmc0vlqmn2ipcpkjlmbi51vv-glibc-2.3.4
 ...
@@ -154,7 +154,7 @@ $ nix-store -qR $(which svn)
 Print the build-time dependencies of `svn`:
 
 ```console
-$ nix-store -qR $(nix-store -qd $(which svn))
+$ nix-store --query --requisites $(nix-store --query --deriver $(which svn))
 /nix/store/02iizgn86m42q905rddvg4ja975bk2i4-grep-2.5.1.tar.bz2.drv
 /nix/store/07a2bzxmzwz5hp58nf03pahrv2ygwgs3-gcc-wrapper.sh
 /nix/store/0ma7c9wsbaxahwwl04gbw3fcd806ski4-glibc-2.3.4.drv
@@ -168,7 +168,7 @@ the derivation (`-qd`), not the closure of the output path that contains
 Show the build-time dependencies as a tree:
 
 ```console
-$ nix-store -q --tree $(nix-store -qd $(which svn))
+$ nix-store --query --tree $(nix-store --query --deriver $(which svn))
 /nix/store/7i5082kfb6yjbqdbiwdhhza0am2xvh6c-subversion-1.1.4.drv
 +---/nix/store/d8afh10z72n8l1cr5w42366abiblgn54-builder.sh
 +---/nix/store/fmzxmpjx2lh849ph0l36snfj9zdibw67-bash-3.0.drv
@@ -180,7 +180,7 @@ $ nix-store -q --tree $(nix-store -qd $(which svn))
 Show all paths that depend on the same OpenSSL library as `svn`:
 
 ```console
-$ nix-store -q --referrers $(nix-store -q --binding openssl $(nix-store -qd $(which svn)))
+$ nix-store --query --referrers $(nix-store --query --binding openssl $(nix-store --query --deriver $(which svn)))
 /nix/store/23ny9l9wixx21632y2wi4p585qhva1q8-sylpheed-1.0.0
 /nix/store/5mbglq5ldqld8sj57273aljwkfvj22mc-subversion-1.1.4
 /nix/store/dpmvp969yhdqs7lm2r1a3gng7pyq6vy4-subversion-1.1.3
@@ -191,7 +191,7 @@ Show all paths that directly or indirectly depend on the Glibc (C
 library) used by `svn`:
 
 ```console
-$ nix-store -q --referrers-closure $(ldd $(which svn) | grep /libc.so | awk '{print $3}')
+$ nix-store --query --referrers-closure $(ldd $(which svn) | grep /libc.so | awk '{print $3}')
 /nix/store/034a6h4vpz9kds5r6kzb9lhh81mscw43-libgnomeprintui-2.8.2
 /nix/store/15l3yi0d45prm7a82pcrknxdh6nzmxza-gawk-3.1.4
 ...
@@ -204,7 +204,7 @@ Make a picture of the runtime dependency graph of the current user
 environment:
 
 ```console
-$ nix-store -q --graph ~/.nix-profile | dot -Tps > graph.ps
+$ nix-store --query --graph ~/.nix-profile | dot -Tps > graph.ps
 $ gv graph.ps
 ```
 
@@ -212,7 +212,7 @@ Show every garbage collector root that points to a store path that
 depends on `svn`:
 
 ```console
-$ nix-store -q --roots $(which svn)
+$ nix-store --query --roots $(which svn)
 /nix/var/nix/profiles/default-81-link
 /nix/var/nix/profiles/default-82-link
 /home/eelco/.local/state/nix/profiles/profile-97-link

doc/manual/src/command-ref/nix-store/read-log.md

@@ -27,7 +27,7 @@ substitute, then the log is unavailable.
 # Example
 
 ```console
-$ nix-store -l $(which ktorrent)
+$ nix-store --read-log $(which ktorrent)
 building /nix/store/dhc73pvzpnzxhdgpimsd9sw39di66ph1-ktorrent-2.2.1
 unpacking sources
 unpacking source archive /nix/store/p8n1jpqs27mgkjw07pb5269717nzf5f8-ktorrent-2.2.1.tar.gz

doc/manual/src/command-ref/nix-store/realise.md

@@ -99,7 +99,7 @@ This operation is typically used to build [store derivation]s produced by
 [store derivation]: @docroot@/glossary.md#gloss-store-derivation
 
 ```console
-$ nix-store -r $(nix-instantiate ./test.nix)
+$ nix-store --realise $(nix-instantiate ./test.nix)
 /nix/store/31axcgrlbfsxzmfff1gyj1bf62hvkby2-aterm-2.3.1
 ```
 
@@ -108,7 +108,7 @@ This is essentially what [`nix-build`](@docroot@/command-ref/nix-build.md) does.
 To test whether a previously-built derivation is deterministic:
 
 ```console
-$ nix-build '<nixpkgs>' -A hello --check -K
+$ nix-build '<nixpkgs>' --attr hello --check -K
 ```
 
 Use [`nix-store --read-log`](./read-log.md) to show the stderr and stdout of a build:

doc/manual/src/command-ref/nix-store/verify-path.md

@@ -24,6 +24,6 @@ path has changed, and 1 otherwise.
 To verify the integrity of the `svn` command and all its dependencies:
 
 ```console
-$ nix-store --verify-path $(nix-store -qR $(which svn))
+$ nix-store --verify-path $(nix-store --query --requisites $(which svn))
 ```
 

doc/manual/src/command-ref/opt-common.md

@@ -162,11 +162,11 @@ Most Nix commands accept the following command-line options:
     }: ...
     ```
 
-    So if you call this Nix expression (e.g., when you do `nix-env -iA
+    So if you call this Nix expression (e.g., when you do `nix-env --install --attr
     pkgname`), the function will be called automatically using the
     value [`builtins.currentSystem`](@docroot@/language/builtins.md) for
     the `system` argument. You can override this using `--arg`, e.g.,
-    `nix-env -iA pkgname --arg system \"i686-freebsd\"`. (Note that
+    `nix-env --install --attr pkgname --arg system \"i686-freebsd\"`. (Note that
     since the argument is a Nix string literal, you have to escape the
     quotes.)
 
@@ -199,7 +199,7 @@ Most Nix commands accept the following command-line options:
     For `nix-shell`, this option is commonly used to give you a shell in
     which you can build the packages returned by the expression. If you
     want to get a shell which contain the *built* packages ready for
-    use, give your expression to the `nix-shell -p` convenience flag
+    use, give your expression to the `nix-shell --packages ` convenience flag
     instead.
 
   - <span id="opt-I">[`-I`](#opt-I)</span> *path*\

doc/manual/src/contributing/hacking.md

@@ -77,7 +77,7 @@ $ nix-shell
 To get a shell with one of the other [supported compilation environments](#compilation-environments):
 
 ```console
-$ nix-shell -A devShells.x86_64-linux.native-clang11StdenvPackages
+$ nix-shell --attr devShells.x86_64-linux.native-clang11StdenvPackages
 ```
 
 > **Note**
@@ -139,7 +139,7 @@ $ nix build .#packages.aarch64-linux.default
 for flake-enabled Nix, or
 
 ```console
-$ nix-build -A packages.aarch64-linux.default
+$ nix-build --attr packages.aarch64-linux.default
 ```
 
 for classic Nix.
@@ -166,7 +166,7 @@ $ nix build .#nix-ccacheStdenv
 for flake-enabled Nix, or
 
 ```console
-$ nix-build -A nix-ccacheStdenv
+$ nix-build --attr nix-ccacheStdenv
 ```
 
 for classic Nix.

doc/manual/src/glossary.md

@@ -101,11 +101,8 @@
     derivation.
 
   - [output-addressed store object]{#gloss-output-addressed-store-object}\
-    A store object whose store path hashes its content.  This
+    A [store object] whose [store path] is determined by its contents.
-    includes derivations, the outputs of
+    This includes derivations, the outputs of [content-addressed derivations](#gloss-content-addressed-derivation), and the outputs of [fixed-output derivations](#gloss-fixed-output-derivation).
-    [content-addressed derivations](#gloss-content-addressed-derivation),
-    and the outputs of
-    [fixed-output derivations](#gloss-fixed-output-derivation).
 
   - [substitute]{#gloss-substitute}\
     A substitute is a command invocation stored in the [Nix database] that
@@ -163,7 +160,7 @@
     build-time dependencies, while the closure of its output path is
     equivalent to its runtime dependencies. For correct deployment it
     is necessary to deploy whole closures, since otherwise at runtime
-    files could be missing. The command `nix-store -qR` prints out
+    files could be missing. The command `nix-store --query --requisites ` prints out
     closures of store paths.
 
     As an example, if the [store object] at path `P` contains a [reference]

doc/manual/src/installation/upgrading.md

@@ -2,13 +2,13 @@
 
 Multi-user Nix users on macOS can upgrade Nix by running: `sudo -i sh -c
 'nix-channel --update &&
-nix-env -iA nixpkgs.nix &&
+nix-env --install --attr nixpkgs.nix &&
 launchctl remove org.nixos.nix-daemon &&
 launchctl load /Library/LaunchDaemons/org.nixos.nix-daemon.plist'`
 
 Single-user installations of Nix should run this: `nix-channel --update;
-nix-env -iA nixpkgs.nix nixpkgs.cacert`
+nix-env --install --attr nixpkgs.nix nixpkgs.cacert`
 
 Multi-user Nix users on Linux should run this with sudo: `nix-channel
---update; nix-env -iA nixpkgs.nix nixpkgs.cacert; systemctl
+--update; nix-env --install --attr nixpkgs.nix nixpkgs.cacert; systemctl
 daemon-reload; systemctl restart nix-daemon`

doc/manual/src/introduction.md

@@ -76,7 +76,7 @@ there after an upgrade.  This means that you can _roll back_ to the
 old version:
 
 ```console
-$ nix-env --upgrade -A nixpkgs.some-package
+$ nix-env --upgrade --attr nixpkgs.some-package
 $ nix-env --rollback
 ```
 
@@ -122,7 +122,7 @@ Nix expressions generally describe how to build a package from
 source, so an installation action like
 
 ```console
-$ nix-env --install -A nixpkgs.firefox
+$ nix-env --install --attr nixpkgs.firefox
 ```
 
 _could_ cause quite a bit of build activity, as not only Firefox but
@@ -158,7 +158,7 @@ Pan newsreader, as described by [its
 Nix expression](https://github.com/NixOS/nixpkgs/blob/master/pkgs/applications/networking/newsreaders/pan/default.nix):
 
 ```console
-$ nix-shell '<nixpkgs>' -A pan
+$ nix-shell '<nixpkgs>' --attr pan
 ```
 
 You’re then dropped into a shell where you can edit, build and test

doc/manual/src/package-management/basic-package-mgmt.md

@@ -47,7 +47,7 @@ $ nix-channel --update
 You can view the set of available packages in Nixpkgs:
 
 ```console
-$ nix-env -qaP
+$ nix-env --query --available --attr-path
 nixpkgs.aterm                       aterm-2.2
 nixpkgs.bash                        bash-3.0
 nixpkgs.binutils                    binutils-2.15
@@ -65,7 +65,7 @@ If you downloaded Nixpkgs yourself, or if you checked it out from GitHub,
 then you need to pass the path to your Nixpkgs tree using the `-f` flag:
 
 ```console
-$ nix-env -qaPf /path/to/nixpkgs
+$ nix-env --query --available --attr-path --file /path/to/nixpkgs
 aterm                               aterm-2.2
 bash                                bash-3.0
 …
@@ -77,7 +77,7 @@ Nixpkgs.
 You can filter the packages by name:
 
 ```console
-$ nix-env -qaP firefox
+$ nix-env --query --available --attr-path firefox
 nixpkgs.firefox-esr                 firefox-91.3.0esr
 nixpkgs.firefox                     firefox-94.0.1
 ```
@@ -85,7 +85,7 @@ nixpkgs.firefox                     firefox-94.0.1
 and using regular expressions:
 
 ```console
-$ nix-env -qaP 'firefox.*'
+$ nix-env --query --available --attr-path 'firefox.*'
 ```
 
 It is also possible to see the *status* of available packages, i.e.,
@@ -93,7 +93,7 @@ whether they are installed into the user environment and/or present in
 the system:
 
 ```console
-$ nix-env -qaPs
+$ nix-env --query --available --attr-path --status
 …
 -PS  nixpkgs.bash                bash-3.0
 --S  nixpkgs.binutils            binutils-2.15
@@ -110,10 +110,10 @@ which is Nix’s mechanism for doing binary deployment. It just means that
 Nix knows that it can fetch a pre-built package from somewhere
 (typically a network server) instead of building it locally.
 
-You can install a package using `nix-env -iA`. For instance,
+You can install a package using `nix-env --install --attr `. For instance,
 
 ```console
-$ nix-env -iA nixpkgs.subversion
+$ nix-env --install --attr nixpkgs.subversion
 ```
 
 will install the package called `subversion` from `nixpkgs` channel (which is, of course, the
@@ -143,14 +143,14 @@ instead of the attribute path, as `nix-env` does not record which attribute
 was used for installing:
 
 ```console
-$ nix-env -e subversion
+$ nix-env --uninstall subversion
 ```
 
 Upgrading to a new version is just as easy. If you have a new release of
 Nix Packages, you can do:
 
 ```console
-$ nix-env -uA nixpkgs.subversion
+$ nix-env --upgrade --attr nixpkgs.subversion
 ```
 
 This will *only* upgrade Subversion if there is a “newer” version in the
@@ -163,15 +163,15 @@ whatever version is in the Nix expressions, use `-i` instead of `-u`;
 You can also upgrade all packages for which there are newer versions:
 
 ```console
-$ nix-env -u
+$ nix-env --upgrade
 ```
 
 Sometimes it’s useful to be able to ask what `nix-env` would do, without
 actually doing it. For instance, to find out what packages would be
-upgraded by `nix-env -u`, you can do
+upgraded by `nix-env --upgrade `, you can do
 
 ```console
-$ nix-env -u --dry-run
+$ nix-env --upgrade --dry-run
 (dry run; not doing anything)
 upgrading `libxslt-1.1.0' to `libxslt-1.1.10'
 upgrading `graphviz-1.10' to `graphviz-1.12'

doc/manual/src/package-management/binary-cache-substituter.md

@@ -9,7 +9,7 @@ The daemon that handles binary cache requests via HTTP, `nix-serve`, is
 not part of the Nix distribution, but you can install it from Nixpkgs:
 
 ```console
-$ nix-env -iA nixpkgs.nix-serve
+$ nix-env --install --attr nixpkgs.nix-serve
 ```
 
 You can then start the server, listening for HTTP connections on
@@ -35,7 +35,7 @@ On the client side, you can tell Nix to use your binary cache using
 `--substituters`, e.g.:
 
 ```console
-$ nix-env -iA nixpkgs.firefox --substituters http://avalon:8080/
+$ nix-env --install --attr nixpkgs.firefox --substituters http://avalon:8080/
 ```
 
 The option `substituters` tells Nix to use this binary cache in

doc/manual/src/package-management/channels.md

@@ -43,7 +43,7 @@ operations (via the symlink `~/.nix-defexpr/channels`). Consequently,
 you can then say
 
 ```console
-$ nix-env -u
+$ nix-env --upgrade
 ```
 
 to upgrade all packages in your profile to the latest versions available

doc/manual/src/package-management/copy-closure.md

@@ -15,7 +15,7 @@ With `nix-store
 path (that is, the path and all its dependencies) to a file, and then
 unpack that file into another Nix store. For example,
 
-    $ nix-store --export $(nix-store -qR $(type -p firefox)) > firefox.closure
+    $ nix-store --export $(nix-store --query --requisites $(type -p firefox)) > firefox.closure
 
 writes the closure of Firefox to a file. You can then copy this file to
 another machine and install the closure:
@@ -27,7 +27,7 @@ store are ignored. It is also possible to pipe the export into another
 command, e.g. to copy and install a closure directly to/on another
 machine:
 
-    $ nix-store --export $(nix-store -qR $(type -p firefox)) | bzip2 | \
+    $ nix-store --export $(nix-store --query --requisites $(type -p firefox)) | bzip2 | \
         ssh alice@itchy.example.org "bunzip2 | nix-store --import"
 
 However, `nix-copy-closure` is generally more efficient because it only

doc/manual/src/package-management/profiles.md

@@ -39,7 +39,7 @@ just Subversion 1.1.2 (arrows in the figure indicate symlinks). This
 would be what we would obtain if we had done
 
 ```console
-$ nix-env -iA nixpkgs.subversion
+$ nix-env --install --attr nixpkgs.subversion
 ```
 
 on a set of Nix expressions that contained Subversion 1.1.2.
@@ -54,7 +54,7 @@ environment is generated based on the current one. For instance,
 generation 43 was created from generation 42 when we did
 
 ```console
-$ nix-env -iA nixpkgs.subversion nixpkgs.firefox
+$ nix-env --install --attr nixpkgs.subversion nixpkgs.firefox
 ```
 
 on a set of Nix expressions that contained Firefox and a new version of
@@ -127,7 +127,7 @@ All `nix-env` operations work on the profile pointed to by
 (abbreviation `-p`):
 
 ```console
-$ nix-env -p /nix/var/nix/profiles/other-profile -iA nixpkgs.subversion
+$ nix-env --profile /nix/var/nix/profiles/other-profile --install --attr nixpkgs.subversion
 ```
 
 This will *not* change the `~/.nix-profile` symlink.

doc/manual/src/package-management/ssh-substituter.md

@@ -6,7 +6,7 @@ automatically fetching any store paths in Firefox’s closure if they are
 available on the server `avalon`:
 
 ```console
-$ nix-env -iA nixpkgs.firefox --substituters ssh://alice@avalon
+$ nix-env --install --attr nixpkgs.firefox --substituters ssh://alice@avalon
 ```
 
 This works similar to the binary cache substituter that Nix usually
@@ -25,7 +25,7 @@ You can also copy the closure of some store path, without installing it
 into your profile, e.g.
 
 ```console
-$ nix-store -r /nix/store/m85bxg…-firefox-34.0.5 --substituters
+$ nix-store --realise /nix/store/m85bxg…-firefox-34.0.5 --substituters
 ssh://alice@avalon
 ```
 

docker.nix

@@ -190,6 +190,12 @@ let
         cp -a ${rootEnv}/* $out/
         ln -s ${manifest} $out/manifest.nix
       '';
+      flake-registry-path = if (flake-registry == null) then
+        null
+      else if (builtins.readFileType (toString flake-registry)) == "directory" then
+        "${flake-registry}/flake-registry.json"
+      else
+        flake-registry;
     in
     pkgs.runCommand "base-system"
       {
@@ -202,7 +208,7 @@ let
         ];
         allowSubstitutes = false;
         preferLocalBuild = true;
-      } ''
+      } (''
       env
       set -x
       mkdir -p $out/etc
@@ -249,15 +255,15 @@ let
       ln -s ${pkgs.coreutils}/bin/env $out/usr/bin/env
       ln -s ${pkgs.bashInteractive}/bin/bash $out/bin/sh
 
-    '' + (lib.optionalString (flake-registry != null) ''
+    '' + (lib.optionalString (flake-registry-path != null) ''
       nixCacheDir="/root/.cache/nix"
       mkdir -p $out$nixCacheDir
       globalFlakeRegistryPath="$nixCacheDir/flake-registry.json"
-      ln -s ${flake-registry}/flake-registry.json $out$globalFlakeRegistryPath
+      ln -s ${flake-registry-path} $out$globalFlakeRegistryPath
       mkdir -p $out/nix/var/nix/gcroots/auto
       rootName=$(${pkgs.nix}/bin/nix --extra-experimental-features nix-command hash file --type sha1 --base32 <(echo -n $globalFlakeRegistryPath))
       ln -s $globalFlakeRegistryPath $out/nix/var/nix/gcroots/auto/$rootName
-    '');
+    ''));
 
 in
 pkgs.dockerTools.buildLayeredImageWithNixDb {

src/libexpr/eval.cc

@@ -4,6 +4,7 @@
 #include "util.hh"
 #include "store-api.hh"
 #include "derivations.hh"
+#include "downstream-placeholder.hh"
 #include "globals.hh"
 #include "eval-inline.hh"
 #include "filetransfer.hh"
@@ -1058,7 +1059,7 @@ void EvalState::mkOutputString(
             ? store->printStorePath(*std::move(optOutputPath))
             /* Downstream we would substitute this for an actual path once
                we build the floating CA derivation */
-            : downstreamPlaceholder(*store, drvPath, outputName),
+            : DownstreamPlaceholder::unknownCaOutput(drvPath, outputName).render(),
         NixStringContext {
             NixStringContextElem::Built {
                 .drvPath = drvPath,
@@ -2380,7 +2381,7 @@ DerivedPath EvalState::coerceToDerivedPath(const PosIdx pos, Value & v, std::str
             // This is testing for the case of CA derivations
             auto sExpected = optOutputPath
                 ? store->printStorePath(*optOutputPath)
-                : downstreamPlaceholder(*store, b.drvPath, output);
+                : DownstreamPlaceholder::unknownCaOutput(b.drvPath, output).render();
             if (s != sExpected)
                 error(
                     "string '%s' has context with the output '%s' from derivation '%s', but the string is not the right placeholder for this derivation output. It should be '%s'",

src/libexpr/eval.hh

@@ -483,7 +483,7 @@ public:
      * Coerce to `DerivedPath`.
      *
      * Must be a string which is either a literal store path or a
-     * "placeholder (see `downstreamPlaceholder()`).
+     * "placeholder (see `DownstreamPlaceholder`).
      *
      * Even more importantly, the string context must be exactly one
      * element, which is either a `NixStringContextElem::Opaque` or
@@ -622,7 +622,7 @@ public:
      * @param optOutputPath Optional output path for that string. Must
      * be passed if and only if output store object is input-addressed.
      * Will be printed to form string if passed, otherwise a placeholder
-     * will be used (see `downstreamPlaceholder()`).
+     * will be used (see `DownstreamPlaceholder`).
      */
     void mkOutputString(
         Value & value,

src/libexpr/primops.cc

@@ -1,5 +1,6 @@
 #include "archive.hh"
 #include "derivations.hh"
+#include "downstream-placeholder.hh"
 #include "eval-inline.hh"
 #include "eval.hh"
 #include "globals.hh"
@@ -87,7 +88,7 @@ StringMap EvalState::realiseContext(const NixStringContext & context)
         auto outputs = resolveDerivedPath(*store, drv);
         for (auto & [outputName, outputPath] : outputs) {
             res.insert_or_assign(
-                downstreamPlaceholder(*store, drv.drvPath, outputName),
+                DownstreamPlaceholder::unknownCaOutput(drv.drvPath, outputName).render(),
                 store->printStorePath(outputPath)
             );
         }

src/libfetchers/git.cc

@@ -62,6 +62,7 @@ std::optional<std::string> readHead(const Path & path)
         .program = "git",
         // FIXME: use 'HEAD' to avoid returning all refs
         .args = {"ls-remote", "--symref", path},
+        .isInteractive = true,
     });
     if (status != 0) return std::nullopt;
 
@@ -350,7 +351,7 @@ struct GitInputScheme : InputScheme
 
         args.push_back(destDir);
 
-        runProgram("git", true, args);
+        runProgram("git", true, args, {}, true);
     }
 
     std::optional<Path> getSourcePath(const Input & input) override
@@ -555,7 +556,7 @@ struct GitInputScheme : InputScheme
                             : ref == "HEAD"
                                 ? *ref
                                 : "refs/heads/" + *ref;
-                    runProgram("git", true, { "-C", repoDir, "--git-dir", gitDir, "fetch", "--quiet", "--force", "--", actualUrl, fmt("%s:%s", fetchRef, fetchRef) });
+                    runProgram("git", true, { "-C", repoDir, "--git-dir", gitDir, "fetch", "--quiet", "--force", "--", actualUrl, fmt("%s:%s", fetchRef, fetchRef) }, {}, true);
                 } catch (Error & e) {
                     if (!pathExists(localRefFile)) throw;
                     warn("could not update local clone of Git repository '%s'; continuing with the most recent version", actualUrl);
@@ -622,7 +623,7 @@ struct GitInputScheme : InputScheme
                 // everything to ensure we get the rev.
                 Activity act(*logger, lvlTalkative, actUnknown, fmt("making temporary clone of '%s'", repoDir));
                 runProgram("git", true, { "-C", tmpDir, "fetch", "--quiet", "--force",
-                        "--update-head-ok", "--", repoDir, "refs/*:refs/*" });
+                        "--update-head-ok", "--", repoDir, "refs/*:refs/*" }, {}, true);
             }
 
             runProgram("git", true, { "-C", tmpDir, "checkout", "--quiet", input.getRev()->gitRev() });
@@ -649,7 +650,7 @@ struct GitInputScheme : InputScheme
 
             {
                 Activity act(*logger, lvlTalkative, actUnknown, fmt("fetching submodules of '%s'", actualUrl));
-                runProgram("git", true, { "-C", tmpDir, "submodule", "--quiet", "update", "--init", "--recursive" });
+                runProgram("git", true, { "-C", tmpDir, "submodule", "--quiet", "update", "--init", "--recursive" }, {}, true);
             }
 
             filter = isNotDotGitDirectory;

src/libstore/build/derivation-goal.cc

@@ -1152,7 +1152,7 @@ HookReply DerivationGoal::tryBuildHook()
 
     /* Tell the hook all the inputs that have to be copied to the
        remote system. */
-    worker_proto::write(worker.store, hook->sink, inputPaths);
+    workerProtoWrite(worker.store, hook->sink, inputPaths);
 
     /* Tell the hooks the missing outputs that have to be copied back
        from the remote system. */
@@ -1163,7 +1163,7 @@ HookReply DerivationGoal::tryBuildHook()
             if (buildMode != bmCheck && status.known && status.known->isValid()) continue;
             missingOutputs.insert(outputName);
         }
-        worker_proto::write(worker.store, hook->sink, missingOutputs);
+        workerProtoWrite(worker.store, hook->sink, missingOutputs);
     }
 
     hook->sink = FdSink();

src/libstore/build/entry-points.cc

@@ -110,7 +110,7 @@ void Store::ensurePath(const StorePath & path)
 }
 
 
-void LocalStore::repairPath(const StorePath & path)
+void Store::repairPath(const StorePath & path)
 {
     Worker worker(*this, *this);
     GoalPtr goal = worker.makePathSubstitutionGoal(path, Repair);

src/libstore/build/local-derivation-goal.cc

@@ -1776,6 +1776,8 @@ void LocalDerivationGoal::runChild()
                 for (auto & path : { "/etc/resolv.conf", "/etc/services", "/etc/hosts" })
                     if (pathExists(path))
                         ss.push_back(path);
+
+                dirsInChroot.emplace(settings.caFile, "/etc/ssl/certs/ca-certificates.crt");
             }
 
             for (auto & i : ss) dirsInChroot.emplace(i, i);

src/libstore/daemon.cc

@@ -263,7 +263,7 @@ static std::vector<DerivedPath> readDerivedPaths(Store & store, unsigned int cli
 {
     std::vector<DerivedPath> reqs;
     if (GET_PROTOCOL_MINOR(clientVersion) >= 30) {
-        reqs = worker_proto::read(store, from, Phantom<std::vector<DerivedPath>> {});
+        reqs = WorkerProto<std::vector<DerivedPath>>::read(store, from);
     } else {
         for (auto & s : readStrings<Strings>(from))
             reqs.push_back(parsePathWithOutputs(store, s).toDerivedPath());
@@ -287,7 +287,7 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
     }
 
     case wopQueryValidPaths: {
-        auto paths = worker_proto::read(*store, from, Phantom<StorePathSet> {});
+        auto paths = WorkerProto<StorePathSet>::read(*store, from);
 
         SubstituteFlag substitute = NoSubstitute;
         if (GET_PROTOCOL_MINOR(clientVersion) >= 27) {
@@ -300,7 +300,7 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
         }
         auto res = store->queryValidPaths(paths, substitute);
         logger->stopWork();
-        worker_proto::write(*store, to, res);
+        workerProtoWrite(*store, to, res);
         break;
     }
 
@@ -316,11 +316,11 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
     }
 
     case wopQuerySubstitutablePaths: {
-        auto paths = worker_proto::read(*store, from, Phantom<StorePathSet> {});
+        auto paths = WorkerProto<StorePathSet>::read(*store, from);
         logger->startWork();
         auto res = store->querySubstitutablePaths(paths);
         logger->stopWork();
-        worker_proto::write(*store, to, res);
+        workerProtoWrite(*store, to, res);
         break;
     }
 
@@ -349,7 +349,7 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
             paths = store->queryValidDerivers(path);
         else paths = store->queryDerivationOutputs(path);
         logger->stopWork();
-        worker_proto::write(*store, to, paths);
+        workerProtoWrite(*store, to, paths);
         break;
     }
 
@@ -367,7 +367,7 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
         logger->startWork();
         auto outputs = store->queryPartialDerivationOutputMap(path);
         logger->stopWork();
-        worker_proto::write(*store, to, outputs);
+        workerProtoWrite(*store, to, outputs);
         break;
     }
 
@@ -393,7 +393,7 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
         if (GET_PROTOCOL_MINOR(clientVersion) >= 25) {
             auto name = readString(from);
             auto camStr = readString(from);
-            auto refs = worker_proto::read(*store, from, Phantom<StorePathSet> {});
+            auto refs = WorkerProto<StorePathSet>::read(*store, from);
             bool repairBool;
             from >> repairBool;
             auto repair = RepairFlag{repairBool};
@@ -495,7 +495,7 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
     case wopAddTextToStore: {
         std::string suffix = readString(from);
         std::string s = readString(from);
-        auto refs = worker_proto::read(*store, from, Phantom<StorePathSet> {});
+        auto refs = WorkerProto<StorePathSet>::read(*store, from);
         logger->startWork();
         auto path = store->addTextToStore(suffix, s, refs, NoRepair);
         logger->stopWork();
@@ -567,7 +567,7 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
         auto results = store->buildPathsWithResults(drvs, mode);
         logger->stopWork();
 
-        worker_proto::write(*store, to, results);
+        workerProtoWrite(*store, to, results);
 
         break;
     }
@@ -644,7 +644,7 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
             DrvOutputs builtOutputs;
             for (auto & [output, realisation] : res.builtOutputs)
                 builtOutputs.insert_or_assign(realisation.id, realisation);
-            worker_proto::write(*store, to, builtOutputs);
+            workerProtoWrite(*store, to, builtOutputs);
         }
         break;
     }
@@ -709,7 +709,7 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
     case wopCollectGarbage: {
         GCOptions options;
         options.action = (GCOptions::GCAction) readInt(from);
-        options.pathsToDelete = worker_proto::read(*store, from, Phantom<StorePathSet> {});
+        options.pathsToDelete = WorkerProto<StorePathSet>::read(*store, from);
         from >> options.ignoreLiveness >> options.maxFreed;
         // obsolete fields
         readInt(from);
@@ -779,7 +779,7 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
         else {
             to << 1
                << (i->second.deriver ? store->printStorePath(*i->second.deriver) : "");
-            worker_proto::write(*store, to, i->second.references);
+            workerProtoWrite(*store, to, i->second.references);
             to << i->second.downloadSize
                << i->second.narSize;
         }
@@ -790,11 +790,11 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
         SubstitutablePathInfos infos;
         StorePathCAMap pathsMap = {};
         if (GET_PROTOCOL_MINOR(clientVersion) < 22) {
-            auto paths = worker_proto::read(*store, from, Phantom<StorePathSet> {});
+            auto paths = WorkerProto<StorePathSet>::read(*store, from);
             for (auto & path : paths)
                 pathsMap.emplace(path, std::nullopt);
         } else
-            pathsMap = worker_proto::read(*store, from, Phantom<StorePathCAMap> {});
+            pathsMap = WorkerProto<StorePathCAMap>::read(*store, from);
         logger->startWork();
         store->querySubstitutablePathInfos(pathsMap, infos);
         logger->stopWork();
@@ -802,7 +802,7 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
         for (auto & i : infos) {
             to << store->printStorePath(i.first)
                << (i.second.deriver ? store->printStorePath(*i.second.deriver) : "");
-            worker_proto::write(*store, to, i.second.references);
+            workerProtoWrite(*store, to, i.second.references);
             to << i.second.downloadSize << i.second.narSize;
         }
         break;
@@ -812,7 +812,7 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
         logger->startWork();
         auto paths = store->queryAllValidPaths();
         logger->stopWork();
-        worker_proto::write(*store, to, paths);
+        workerProtoWrite(*store, to, paths);
         break;
     }
 
@@ -884,7 +884,7 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
         ValidPathInfo info { path, narHash };
         if (deriver != "")
             info.deriver = store->parseStorePath(deriver);
-        info.references = worker_proto::read(*store, from, Phantom<StorePathSet> {});
+        info.references = WorkerProto<StorePathSet>::read(*store, from);
         from >> info.registrationTime >> info.narSize >> info.ultimate;
         info.sigs = readStrings<StringSet>(from);
         info.ca = ContentAddress::parseOpt(readString(from));
@@ -935,9 +935,9 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
         uint64_t downloadSize, narSize;
         store->queryMissing(targets, willBuild, willSubstitute, unknown, downloadSize, narSize);
         logger->stopWork();
-        worker_proto::write(*store, to, willBuild);
+        workerProtoWrite(*store, to, willBuild);
-        worker_proto::write(*store, to, willSubstitute);
+        workerProtoWrite(*store, to, willSubstitute);
-        worker_proto::write(*store, to, unknown);
+        workerProtoWrite(*store, to, unknown);
         to << downloadSize << narSize;
         break;
     }
@@ -950,7 +950,7 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
             store->registerDrvOutput(Realisation{
                 .id = outputId, .outPath = outputPath});
         } else {
-            auto realisation = worker_proto::read(*store, from, Phantom<Realisation>());
+            auto realisation = WorkerProto<Realisation>::read(*store, from);
             store->registerDrvOutput(realisation);
         }
         logger->stopWork();
@@ -965,11 +965,11 @@ static void performOp(TunnelLogger * logger, ref<Store> store,
         if (GET_PROTOCOL_MINOR(clientVersion) < 31) {
             std::set<StorePath> outPaths;
             if (info) outPaths.insert(info->outPath);
-            worker_proto::write(*store, to, outPaths);
+            workerProtoWrite(*store, to, outPaths);
         } else {
             std::set<Realisation> realisations;
             if (info) realisations.insert(*info);
-            worker_proto::write(*store, to, realisations);
+            workerProtoWrite(*store, to, realisations);
         }
         break;
     }
@@ -1045,7 +1045,7 @@ void processConnection(
         auto temp = trusted
             ? store->isTrustedClient()
             : std::optional { NotTrusted };
-        worker_proto::write(*store, to, temp);
+        workerProtoWrite(*store, to, temp);
     }
 
     /* Send startup error messages to the client. */

src/libstore/derivations.cc

@@ -1,4 +1,5 @@
 #include "derivations.hh"
+#include "downstream-placeholder.hh"
 #include "store-api.hh"
 #include "globals.hh"
 #include "util.hh"
@@ -748,7 +749,7 @@ Source & readDerivation(Source & in, const Store & store, BasicDerivation & drv,
         drv.outputs.emplace(std::move(name), std::move(output));
     }
 
-    drv.inputSrcs = worker_proto::read(store, in, Phantom<StorePathSet> {});
+    drv.inputSrcs = WorkerProto<StorePathSet>::read(store, in);
     in >> drv.platform >> drv.builder;
     drv.args = readStrings<Strings>(in);
 
@@ -796,7 +797,7 @@ void writeDerivation(Sink & out, const Store & store, const BasicDerivation & dr
             },
         }, i.second.raw());
     }
-    worker_proto::write(store, out, drv.inputSrcs);
+    workerProtoWrite(store, out, drv.inputSrcs);
     out << drv.platform << drv.builder << drv.args;
     out << drv.env.size();
     for (auto & i : drv.env)
@@ -810,13 +811,7 @@ std::string hashPlaceholder(const std::string_view outputName)
     return "/" + hashString(htSHA256, concatStrings("nix-output:", outputName)).to_string(Base32, false);
 }
 
-std::string downstreamPlaceholder(const Store & store, const StorePath & drvPath, std::string_view outputName)
+
-{
-    auto drvNameWithExtension = drvPath.name();
-    auto drvName = drvNameWithExtension.substr(0, drvNameWithExtension.size() - 4);
-    auto clearText = "nix-upstream-output:" + std::string { drvPath.hashPart() } + ":" + outputPathName(drvName, outputName);
-    return "/" + hashString(htSHA256, clearText).to_string(Base32, false);
-}
 
 
 static void rewriteDerivation(Store & store, BasicDerivation & drv, const StringMap & rewrites)
@@ -880,7 +875,7 @@ std::optional<BasicDerivation> Derivation::tryResolve(
         for (auto & outputName : inputOutputs) {
             if (auto actualPath = get(inputDrvOutputs, { inputDrv, outputName })) {
                 inputRewrites.emplace(
-                    downstreamPlaceholder(store, inputDrv, outputName),
+                    DownstreamPlaceholder::unknownCaOutput(inputDrv, outputName).render(),
                     store.printStorePath(*actualPath));
                 resolved.inputSrcs.insert(*actualPath);
             } else {

src/libstore/derivations.hh

@@ -6,6 +6,7 @@
 #include "hash.hh"
 #include "content-address.hh"
 #include "repair-flag.hh"
+#include "derived-path.hh"
 #include "sync.hh"
 #include "comparator.hh"
 
@@ -495,17 +496,6 @@ void writeDerivation(Sink & out, const Store & store, const BasicDerivation & dr
  */
 std::string hashPlaceholder(const std::string_view outputName);
 
-/**
- * This creates an opaque and almost certainly unique string
- * deterministically from a derivation path and output name.
- *
- * It is used as a placeholder to allow derivations to refer to
- * content-addressed paths whose content --- and thus the path
- * themselves --- isn't yet known. This occurs when a derivation has a
- * dependency which is a CA derivation.
- */
-std::string downstreamPlaceholder(const Store & store, const StorePath & drvPath, std::string_view outputName);
-
 extern const Hash impureOutputHash;
 
 }

src/libstore/downstream-placeholder.cc

@@ -0,0 +1,39 @@
+#include "downstream-placeholder.hh"
+#include "derivations.hh"
+
+namespace nix {
+
+std::string DownstreamPlaceholder::render() const
+{
+    return "/" + hash.to_string(Base32, false);
+}
+
+
+DownstreamPlaceholder DownstreamPlaceholder::unknownCaOutput(
+    const StorePath & drvPath,
+    std::string_view outputName)
+{
+    auto drvNameWithExtension = drvPath.name();
+    auto drvName = drvNameWithExtension.substr(0, drvNameWithExtension.size() - 4);
+    auto clearText = "nix-upstream-output:" + std::string { drvPath.hashPart() } + ":" + outputPathName(drvName, outputName);
+    return DownstreamPlaceholder {
+        hashString(htSHA256, clearText)
+    };
+}
+
+DownstreamPlaceholder DownstreamPlaceholder::unknownDerivation(
+    const DownstreamPlaceholder & placeholder,
+    std::string_view outputName,
+    const ExperimentalFeatureSettings & xpSettings)
+{
+    xpSettings.require(Xp::DynamicDerivations);
+    auto compressed = compressHash(placeholder.hash, 20);
+    auto clearText = "nix-computed-output:"
+        + compressed.to_string(Base32, false)
+        + ":" + std::string { outputName };
+    return DownstreamPlaceholder {
+        hashString(htSHA256, clearText)
+    };
+}
+
+}

src/libstore/downstream-placeholder.hh

@@ -0,0 +1,75 @@
+#pragma once
+///@file
+
+#include "hash.hh"
+#include "path.hh"
+
+namespace nix {
+
+/**
+ * Downstream Placeholders are opaque and almost certainly unique values
+ * used to allow derivations to refer to store objects which are yet to
+ * be built and for we do not yet have store paths for.
+ *
+ * They correspond to `DerivedPaths` that are not `DerivedPath::Opaque`,
+ * except for the cases involving input addressing or fixed outputs
+ * where we do know a store path for the derivation output in advance.
+ *
+ * Unlike `DerivationPath`, however, `DownstreamPlaceholder` is
+ * purposefully opaque and obfuscated. This is so they are hard to
+ * create by accident, and so substituting them (once we know what the
+ * path to store object is) is unlikely to capture other stuff it
+ * shouldn't.
+ *
+ * We use them with `Derivation`: the `render()` method is called to
+ * render an opaque string which can be used in the derivation, and the
+ * resolving logic can substitute those strings for store paths when
+ * resolving `Derivation.inputDrvs` to `BasicDerivation.inputSrcs`.
+ */
+class DownstreamPlaceholder
+{
+    /**
+     * `DownstreamPlaceholder` is just a newtype of `Hash`.
+     * This its only field.
+     */
+    Hash hash;
+
+    /**
+     * Newtype constructor
+     */
+    DownstreamPlaceholder(Hash hash) : hash(hash) { }
+
+public:
+    /**
+     * This creates an opaque and almost certainly unique string
+     * deterministically from the placeholder.
+     */
+    std::string render() const;
+
+    /**
+     * Create a placeholder for an unknown output of a content-addressed
+     * derivation.
+     *
+     * The derivation itself is known (we have a store path for it), but
+     * the output doesn't yet have a known store path.
+     */
+    static DownstreamPlaceholder unknownCaOutput(
+        const StorePath & drvPath,
+        std::string_view outputName);
+
+    /**
+     * Create a placehold for the output of an unknown derivation.
+     *
+     * The derivation is not yet known because it is a dynamic
+     * derivaiton --- it is itself an output of another derivation ---
+     * and we just have (another) placeholder for it.
+     *
+     * @param xpSettings Stop-gap to avoid globals during unit tests.
+     */
+    static DownstreamPlaceholder unknownDerivation(
+        const DownstreamPlaceholder & drvPlaceholder,
+        std::string_view outputName,
+        const ExperimentalFeatureSettings & xpSettings = experimentalFeatureSettings);
+};
+
+}

src/libstore/export-import.cc

@@ -45,7 +45,7 @@ void Store::exportPath(const StorePath & path, Sink & sink)
     teeSink
         << exportMagic
         << printStorePath(path);
-    worker_proto::write(*this, teeSink, info->references);
+    workerProtoWrite(*this, teeSink, info->references);
     teeSink
         << (info->deriver ? printStorePath(*info->deriver) : "")
         << 0;
@@ -73,7 +73,7 @@ StorePaths Store::importPaths(Source & source, CheckSigsFlag checkSigs)
 
         //Activity act(*logger, lvlInfo, "importing path '%s'", info.path);
 
-        auto references = worker_proto::read(*this, source, Phantom<StorePathSet> {});
+        auto references = WorkerProto<StorePathSet>::read(*this, source);
         auto deriver = readString(source);
         auto narHash = hashString(htSHA256, saved.s);
 

src/libstore/legacy-ssh-store.cc

@@ -146,7 +146,7 @@ struct LegacySSHStore : public virtual LegacySSHStoreConfig, public virtual Stor
             auto deriver = readString(conn->from);
             if (deriver != "")
                 info->deriver = parseStorePath(deriver);
-            info->references = worker_proto::read(*this, conn->from, Phantom<StorePathSet> {});
+            info->references = WorkerProto<StorePathSet>::read(*this, conn->from);
             readLongLong(conn->from); // download size
             info->narSize = readLongLong(conn->from);
 
@@ -180,7 +180,7 @@ struct LegacySSHStore : public virtual LegacySSHStoreConfig, public virtual Stor
                 << printStorePath(info.path)
                 << (info.deriver ? printStorePath(*info.deriver) : "")
                 << info.narHash.to_string(Base16, false);
-            worker_proto::write(*this, conn->to, info.references);
+            workerProtoWrite(*this, conn->to, info.references);
             conn->to
                 << info.registrationTime
                 << info.narSize
@@ -209,7 +209,7 @@ struct LegacySSHStore : public virtual LegacySSHStoreConfig, public virtual Stor
             conn->to
                 << exportMagic
                 << printStorePath(info.path);
-            worker_proto::write(*this, conn->to, info.references);
+            workerProtoWrite(*this, conn->to, info.references);
             conn->to
                 << (info.deriver ? printStorePath(*info.deriver) : "")
                 << 0
@@ -294,7 +294,7 @@ public:
         if (GET_PROTOCOL_MINOR(conn->remoteVersion) >= 3)
             conn->from >> status.timesBuilt >> status.isNonDeterministic >> status.startTime >> status.stopTime;
         if (GET_PROTOCOL_MINOR(conn->remoteVersion) >= 6) {
-            auto builtOutputs = worker_proto::read(*this, conn->from, Phantom<DrvOutputs> {});
+            auto builtOutputs = WorkerProto<DrvOutputs>::read(*this, conn->from);
             for (auto && [output, realisation] : builtOutputs)
                 status.builtOutputs.insert_or_assign(
                     std::move(output.outputName),
@@ -344,6 +344,17 @@ public:
     virtual ref<FSAccessor> getFSAccessor() override
     { unsupported("getFSAccessor"); }
 
+    /**
+     * The default instance would schedule the work on the client side, but
+     * for consistency with `buildPaths` and `buildDerivation` it should happen
+     * on the remote side.
+     *
+     * We make this fail for now so we can add implement this properly later
+     * without it being a breaking change.
+     */
+    void repairPath(const StorePath & path) override
+    { unsupported("repairPath"); }
+
     void computeFSClosure(const StorePathSet & paths,
         StorePathSet & out, bool flipDirection = false,
         bool includeOutputs = false, bool includeDerivers = false) override
@@ -358,10 +369,10 @@ public:
         conn->to
             << cmdQueryClosure
             << includeOutputs;
-        worker_proto::write(*this, conn->to, paths);
+        workerProtoWrite(*this, conn->to, paths);
         conn->to.flush();
 
-        for (auto & i : worker_proto::read(*this, conn->from, Phantom<StorePathSet> {}))
+        for (auto & i : WorkerProto<StorePathSet>::read(*this, conn->from))
             out.insert(i);
     }
 
@@ -374,10 +385,10 @@ public:
             << cmdQueryValidPaths
             << false // lock
             << maybeSubstitute;
-        worker_proto::write(*this, conn->to, paths);
+        workerProtoWrite(*this, conn->to, paths);
         conn->to.flush();
 
-        return worker_proto::read(*this, conn->from, Phantom<StorePathSet> {});
+        return WorkerProto<StorePathSet>::read(*this, conn->from);
     }
 
     void connect() override

src/libstore/local-store.hh

@@ -256,8 +256,6 @@ public:
 
     void vacuumDB();
 
-    void repairPath(const StorePath & path) override;
-
     void addSignatures(const StorePath & storePath, const StringSet & sigs) override;
 
     /**

src/libstore/path-info.cc

@@ -1,5 +1,6 @@
 #include "path-info.hh"
 #include "worker-protocol.hh"
+#include "store-api.hh"
 
 namespace nix {
 
@@ -131,7 +132,7 @@ ValidPathInfo ValidPathInfo::read(Source & source, const Store & store, unsigned
     auto narHash = Hash::parseAny(readString(source), htSHA256);
     ValidPathInfo info(path, narHash);
     if (deriver != "") info.deriver = store.parseStorePath(deriver);
-    info.references = worker_proto::read(store, source, Phantom<StorePathSet> {});
+    info.references = WorkerProto<StorePathSet>::read(store, source);
     source >> info.registrationTime >> info.narSize;
     if (format >= 16) {
         source >> info.ultimate;
@@ -152,7 +153,7 @@ void ValidPathInfo::write(
         sink << store.printStorePath(path);
     sink << (deriver ? store.printStorePath(*deriver) : "")
          << narHash.to_string(Base16, false);
-    worker_proto::write(store, sink, references);
+    workerProtoWrite(store, sink, references);
     sink << registrationTime << narSize;
     if (format >= 16) {
         sink << ultimate

src/libstore/remote-store.cc

@@ -18,189 +18,6 @@
 
 namespace nix {
 
-namespace worker_proto {
-
-std::string read(const Store & store, Source & from, Phantom<std::string> _)
-{
-    return readString(from);
-}
-
-void write(const Store & store, Sink & out, const std::string & str)
-{
-    out << str;
-}
-
-
-StorePath read(const Store & store, Source & from, Phantom<StorePath> _)
-{
-    return store.parseStorePath(readString(from));
-}
-
-void write(const Store & store, Sink & out, const StorePath & storePath)
-{
-    out << store.printStorePath(storePath);
-}
-
-
-std::optional<TrustedFlag> read(const Store & store, Source & from, Phantom<std::optional<TrustedFlag>> _)
-{
-    auto temp = readNum<uint8_t>(from);
-    switch (temp) {
-        case 0:
-            return std::nullopt;
-        case 1:
-            return { Trusted };
-        case 2:
-            return { NotTrusted };
-        default:
-            throw Error("Invalid trusted status from remote");
-    }
-}
-
-void write(const Store & store, Sink & out, const std::optional<TrustedFlag> & optTrusted)
-{
-    if (!optTrusted)
-        out << (uint8_t)0;
-    else {
-        switch (*optTrusted) {
-        case Trusted:
-            out << (uint8_t)1;
-            break;
-        case NotTrusted:
-            out << (uint8_t)2;
-            break;
-        default:
-            assert(false);
-        };
-    }
-}
-
-
-ContentAddress read(const Store & store, Source & from, Phantom<ContentAddress> _)
-{
-    return ContentAddress::parse(readString(from));
-}
-
-void write(const Store & store, Sink & out, const ContentAddress & ca)
-{
-    out << renderContentAddress(ca);
-}
-
-
-DerivedPath read(const Store & store, Source & from, Phantom<DerivedPath> _)
-{
-    auto s = readString(from);
-    return DerivedPath::parseLegacy(store, s);
-}
-
-void write(const Store & store, Sink & out, const DerivedPath & req)
-{
-    out << req.to_string_legacy(store);
-}
-
-
-Realisation read(const Store & store, Source & from, Phantom<Realisation> _)
-{
-    std::string rawInput = readString(from);
-    return Realisation::fromJSON(
-        nlohmann::json::parse(rawInput),
-        "remote-protocol"
-    );
-}
-
-void write(const Store & store, Sink & out, const Realisation & realisation)
-{
-    out << realisation.toJSON().dump();
-}
-
-
-DrvOutput read(const Store & store, Source & from, Phantom<DrvOutput> _)
-{
-    return DrvOutput::parse(readString(from));
-}
-
-void write(const Store & store, Sink & out, const DrvOutput & drvOutput)
-{
-    out << drvOutput.to_string();
-}
-
-
-KeyedBuildResult read(const Store & store, Source & from, Phantom<KeyedBuildResult> _)
-{
-    auto path = worker_proto::read(store, from, Phantom<DerivedPath> {});
-    auto br = worker_proto::read(store, from, Phantom<BuildResult> {});
-    return KeyedBuildResult {
-        std::move(br),
-        /* .path = */ std::move(path),
-    };
-}
-
-void write(const Store & store, Sink & to, const KeyedBuildResult & res)
-{
-    worker_proto::write(store, to, res.path);
-    worker_proto::write(store, to, static_cast<const BuildResult &>(res));
-}
-
-
-BuildResult read(const Store & store, Source & from, Phantom<BuildResult> _)
-{
-    BuildResult res;
-    res.status = (BuildResult::Status) readInt(from);
-    from
-        >> res.errorMsg
-        >> res.timesBuilt
-        >> res.isNonDeterministic
-        >> res.startTime
-        >> res.stopTime;
-    auto builtOutputs = worker_proto::read(store, from, Phantom<DrvOutputs> {});
-    for (auto && [output, realisation] : builtOutputs)
-        res.builtOutputs.insert_or_assign(
-            std::move(output.outputName),
-            std::move(realisation));
-    return res;
-}
-
-void write(const Store & store, Sink & to, const BuildResult & res)
-{
-    to
-        << res.status
-        << res.errorMsg
-        << res.timesBuilt
-        << res.isNonDeterministic
-        << res.startTime
-        << res.stopTime;
-    DrvOutputs builtOutputs;
-    for (auto & [output, realisation] : res.builtOutputs)
-        builtOutputs.insert_or_assign(realisation.id, realisation);
-    worker_proto::write(store, to, builtOutputs);
-}
-
-
-std::optional<StorePath> read(const Store & store, Source & from, Phantom<std::optional<StorePath>> _)
-{
-    auto s = readString(from);
-    return s == "" ? std::optional<StorePath> {} : store.parseStorePath(s);
-}
-
-void write(const Store & store, Sink & out, const std::optional<StorePath> & storePathOpt)
-{
-    out << (storePathOpt ? store.printStorePath(*storePathOpt) : "");
-}
-
-
-std::optional<ContentAddress> read(const Store & store, Source & from, Phantom<std::optional<ContentAddress>> _)
-{
-    return ContentAddress::parseOpt(readString(from));
-}
-
-void write(const Store & store, Sink & out, const std::optional<ContentAddress> & caOpt)
-{
-    out << (caOpt ? renderContentAddress(*caOpt) : "");
-}
-
-}
-
-
 /* TODO: Separate these store impls into different files, give them better names */
 RemoteStore::RemoteStore(const Params & params)
     : RemoteStoreConfig(params)
@@ -283,7 +100,7 @@ void RemoteStore::initConnection(Connection & conn)
         }
 
         if (GET_PROTOCOL_MINOR(conn.daemonVersion) >= 35) {
-            conn.remoteTrustsUs = worker_proto::read(*this, conn.from, Phantom<std::optional<TrustedFlag>> {});
+            conn.remoteTrustsUs = WorkerProto<std::optional<TrustedFlag>>::read(*this, conn.from);
         } else {
             // We don't know the answer; protocol to old.
             conn.remoteTrustsUs = std::nullopt;
@@ -410,12 +227,12 @@ StorePathSet RemoteStore::queryValidPaths(const StorePathSet & paths, Substitute
         return res;
     } else {
         conn->to << wopQueryValidPaths;
-        worker_proto::write(*this, conn->to, paths);
+        workerProtoWrite(*this, conn->to, paths);
         if (GET_PROTOCOL_MINOR(conn->daemonVersion) >= 27) {
             conn->to << (settings.buildersUseSubstitutes ? 1 : 0);
         }
         conn.processStderr();
-        return worker_proto::read(*this, conn->from, Phantom<StorePathSet> {});
+        return WorkerProto<StorePathSet>::read(*this, conn->from);
     }
 }
 
@@ -425,7 +242,7 @@ StorePathSet RemoteStore::queryAllValidPaths()
     auto conn(getConnection());
     conn->to << wopQueryAllValidPaths;
     conn.processStderr();
-    return worker_proto::read(*this, conn->from, Phantom<StorePathSet> {});
+    return WorkerProto<StorePathSet>::read(*this, conn->from);
 }
 
 
@@ -442,9 +259,9 @@ StorePathSet RemoteStore::querySubstitutablePaths(const StorePathSet & paths)
         return res;
     } else {
         conn->to << wopQuerySubstitutablePaths;
-        worker_proto::write(*this, conn->to, paths);
+        workerProtoWrite(*this, conn->to, paths);
         conn.processStderr();
-        return worker_proto::read(*this, conn->from, Phantom<StorePathSet> {});
+        return WorkerProto<StorePathSet>::read(*this, conn->from);
     }
 }
 
@@ -466,7 +283,7 @@ void RemoteStore::querySubstitutablePathInfos(const StorePathCAMap & pathsMap, S
             auto deriver = readString(conn->from);
             if (deriver != "")
                 info.deriver = parseStorePath(deriver);
-            info.references = worker_proto::read(*this, conn->from, Phantom<StorePathSet> {});
+            info.references = WorkerProto<StorePathSet>::read(*this, conn->from);
             info.downloadSize = readLongLong(conn->from);
             info.narSize = readLongLong(conn->from);
             infos.insert_or_assign(i.first, std::move(info));
@@ -479,9 +296,9 @@ void RemoteStore::querySubstitutablePathInfos(const StorePathCAMap & pathsMap, S
             StorePathSet paths;
             for (auto & path : pathsMap)
                 paths.insert(path.first);
-            worker_proto::write(*this, conn->to, paths);
+            workerProtoWrite(*this, conn->to, paths);
         } else
-            worker_proto::write(*this, conn->to, pathsMap);
+            workerProtoWrite(*this, conn->to, pathsMap);
         conn.processStderr();
         size_t count = readNum<size_t>(conn->from);
         for (size_t n = 0; n < count; n++) {
@@ -489,7 +306,7 @@ void RemoteStore::querySubstitutablePathInfos(const StorePathCAMap & pathsMap, S
             auto deriver = readString(conn->from);
             if (deriver != "")
                 info.deriver = parseStorePath(deriver);
-            info.references = worker_proto::read(*this, conn->from, Phantom<StorePathSet> {});
+            info.references = WorkerProto<StorePathSet>::read(*this, conn->from);
             info.downloadSize = readLongLong(conn->from);
             info.narSize = readLongLong(conn->from);
         }
@@ -532,7 +349,7 @@ void RemoteStore::queryReferrers(const StorePath & path,
     auto conn(getConnection());
     conn->to << wopQueryReferrers << printStorePath(path);
     conn.processStderr();
-    for (auto & i : worker_proto::read(*this, conn->from, Phantom<StorePathSet> {}))
+    for (auto & i : WorkerProto<StorePathSet>::read(*this, conn->from))
         referrers.insert(i);
 }
 
@@ -542,7 +359,7 @@ StorePathSet RemoteStore::queryValidDerivers(const StorePath & path)
     auto conn(getConnection());
     conn->to << wopQueryValidDerivers << printStorePath(path);
     conn.processStderr();
-    return worker_proto::read(*this, conn->from, Phantom<StorePathSet> {});
+    return WorkerProto<StorePathSet>::read(*this, conn->from);
 }
 
 
@@ -554,7 +371,7 @@ StorePathSet RemoteStore::queryDerivationOutputs(const StorePath & path)
     auto conn(getConnection());
     conn->to << wopQueryDerivationOutputs << printStorePath(path);
     conn.processStderr();
-    return worker_proto::read(*this, conn->from, Phantom<StorePathSet> {});
+    return WorkerProto<StorePathSet>::read(*this, conn->from);
 }
 
 
@@ -564,7 +381,7 @@ std::map<std::string, std::optional<StorePath>> RemoteStore::queryPartialDerivat
         auto conn(getConnection());
         conn->to << wopQueryDerivationOutputMap << printStorePath(path);
         conn.processStderr();
-        return worker_proto::read(*this, conn->from, Phantom<std::map<std::string, std::optional<StorePath>>> {});
+        return WorkerProto<std::map<std::string, std::optional<StorePath>>>::read(*this, conn->from);
     } else {
         // Fallback for old daemon versions.
         // For floating-CA derivations (and their co-dependencies) this is an
@@ -610,7 +427,7 @@ ref<const ValidPathInfo> RemoteStore::addCAToStore(
             << wopAddToStore
             << name
             << caMethod.render(hashType);
-        worker_proto::write(*this, conn->to, references);
+        workerProtoWrite(*this, conn->to, references);
         conn->to << repair;
 
         // The dump source may invoke the store, so we need to make some room.
@@ -635,7 +452,7 @@ ref<const ValidPathInfo> RemoteStore::addCAToStore(
                         name, printHashType(hashType));
                 std::string s = dump.drain();
                 conn->to << wopAddTextToStore << name << s;
-                worker_proto::write(*this, conn->to, references);
+                workerProtoWrite(*this, conn->to, references);
                 conn.processStderr();
             },
             [&](const FileIngestionMethod & fim) -> void {
@@ -701,7 +518,7 @@ void RemoteStore::addToStore(const ValidPathInfo & info, Source & source,
             sink
                 << exportMagic
                 << printStorePath(info.path);
-            worker_proto::write(*this, sink, info.references);
+            workerProtoWrite(*this, sink, info.references);
             sink
                 << (info.deriver ? printStorePath(*info.deriver) : "")
                 << 0 // == no legacy signature
@@ -711,7 +528,7 @@ void RemoteStore::addToStore(const ValidPathInfo & info, Source & source,
 
         conn.processStderr(0, source2.get());
 
-        auto importedPaths = worker_proto::read(*this, conn->from, Phantom<StorePathSet> {});
+        auto importedPaths = WorkerProto<StorePathSet>::read(*this, conn->from);
         assert(importedPaths.size() <= 1);
     }
 
@@ -720,7 +537,7 @@ void RemoteStore::addToStore(const ValidPathInfo & info, Source & source,
                  << printStorePath(info.path)
                  << (info.deriver ? printStorePath(*info.deriver) : "")
                  << info.narHash.to_string(Base16, false);
-        worker_proto::write(*this, conn->to, info.references);
+        workerProtoWrite(*this, conn->to, info.references);
         conn->to << info.registrationTime << info.narSize
                  << info.ultimate << info.sigs << renderContentAddress(info.ca)
                  << repair << !checkSigs;
@@ -793,7 +610,7 @@ void RemoteStore::registerDrvOutput(const Realisation & info)
         conn->to << info.id.to_string();
         conn->to << std::string(info.outPath.to_string());
     } else {
-        worker_proto::write(*this, conn->to, info);
+        workerProtoWrite(*this, conn->to, info);
     }
     conn.processStderr();
 }
@@ -815,14 +632,14 @@ void RemoteStore::queryRealisationUncached(const DrvOutput & id,
 
         auto real = [&]() -> std::shared_ptr<const Realisation> {
             if (GET_PROTOCOL_MINOR(conn->daemonVersion) < 31) {
-                auto outPaths = worker_proto::read(
+                auto outPaths = WorkerProto<std::set<StorePath>>::read(
-                    *this, conn->from, Phantom<std::set<StorePath>> {});
+                    *this, conn->from);
                 if (outPaths.empty())
                     return nullptr;
                 return std::make_shared<const Realisation>(Realisation { .id = id, .outPath = *outPaths.begin() });
             } else {
-                auto realisations = worker_proto::read(
+                auto realisations = WorkerProto<std::set<Realisation>>::read(
-                    *this, conn->from, Phantom<std::set<Realisation>> {});
+                    *this, conn->from);
                 if (realisations.empty())
                     return nullptr;
                 return std::make_shared<const Realisation>(*realisations.begin());
@@ -836,7 +653,7 @@ void RemoteStore::queryRealisationUncached(const DrvOutput & id,
 static void writeDerivedPaths(RemoteStore & store, ConnectionHandle & conn, const std::vector<DerivedPath> & reqs)
 {
     if (GET_PROTOCOL_MINOR(conn->daemonVersion) >= 30) {
-        worker_proto::write(store, conn->to, reqs);
+        workerProtoWrite(store, conn->to, reqs);
     } else {
         Strings ss;
         for (auto & p : reqs) {
@@ -906,7 +723,7 @@ std::vector<KeyedBuildResult> RemoteStore::buildPathsWithResults(
         writeDerivedPaths(*this, conn, paths);
         conn->to << buildMode;
         conn.processStderr();
-        return worker_proto::read(*this, conn->from, Phantom<std::vector<KeyedBuildResult>> {});
+        return WorkerProto<std::vector<KeyedBuildResult>>::read(*this, conn->from);
     } else {
         // Avoid deadlock.
         conn_.reset();
@@ -989,7 +806,7 @@ BuildResult RemoteStore::buildDerivation(const StorePath & drvPath, const BasicD
         conn->from >> res.timesBuilt >> res.isNonDeterministic >> res.startTime >> res.stopTime;
     }
     if (GET_PROTOCOL_MINOR(conn->daemonVersion) >= 28) {
-        auto builtOutputs = worker_proto::read(*this, conn->from, Phantom<DrvOutputs> {});
+        auto builtOutputs = WorkerProto<DrvOutputs>::read(*this, conn->from);
         for (auto && [output, realisation] : builtOutputs)
             res.builtOutputs.insert_or_assign(
                 std::move(output.outputName),
@@ -1048,7 +865,7 @@ void RemoteStore::collectGarbage(const GCOptions & options, GCResults & results)
 
     conn->to
         << wopCollectGarbage << options.action;
-    worker_proto::write(*this, conn->to, options.pathsToDelete);
+    workerProtoWrite(*this, conn->to, options.pathsToDelete);
     conn->to << options.ignoreLiveness
         << options.maxFreed
         /* removed options */
@@ -1107,9 +924,9 @@ void RemoteStore::queryMissing(const std::vector<DerivedPath> & targets,
         conn->to << wopQueryMissing;
         writeDerivedPaths(*this, conn, targets);
         conn.processStderr();
-        willBuild = worker_proto::read(*this, conn->from, Phantom<StorePathSet> {});
+        willBuild = WorkerProto<StorePathSet>::read(*this, conn->from);
-        willSubstitute = worker_proto::read(*this, conn->from, Phantom<StorePathSet> {});
+        willSubstitute = WorkerProto<StorePathSet>::read(*this, conn->from);
-        unknown = worker_proto::read(*this, conn->from, Phantom<StorePathSet> {});
+        unknown = WorkerProto<StorePathSet>::read(*this, conn->from);
         conn->from >> downloadSize >> narSize;
         return;
     }

src/libstore/remote-store.hh

@@ -137,6 +137,17 @@ public:
 
     bool verifyStore(bool checkContents, RepairFlag repair) override;
 
+    /**
+     * The default instance would schedule the work on the client side, but
+     * for consistency with `buildPaths` and `buildDerivation` it should happen
+     * on the remote side.
+     *
+     * We make this fail for now so we can add implement this properly later
+     * without it being a breaking change.
+     */
+    void repairPath(const StorePath & path) override
+    { unsupported("repairPath"); }
+
     void addSignatures(const StorePath & storePath, const StringSet & sigs) override;
 
     void queryMissing(const std::vector<DerivedPath> & targets,

src/libstore/ssh.cc

@@ -41,6 +41,11 @@ void SSHMaster::addCommonSSHOpts(Strings & args)
     args.push_back("-oLocalCommand=echo started");
 }
 
+bool SSHMaster::isMasterRunning() {
+    auto res = runProgram(RunOptions {.program = "ssh", .args = {"-O", "check", host}, .mergeStderrToStdout = true});
+    return res.first == 0;
+}
+
 std::unique_ptr<SSHMaster::Connection> SSHMaster::startCommand(const std::string & command)
 {
     Path socketPath = startMaster();
@@ -97,7 +102,7 @@ std::unique_ptr<SSHMaster::Connection> SSHMaster::startCommand(const std::string
 
     // Wait for the SSH connection to be established,
     // So that we don't overwrite the password prompt with our progress bar.
-    if (!fakeSSH && !useMaster) {
+    if (!fakeSSH && !useMaster && !isMasterRunning()) {
         std::string reply;
         try {
             reply = readLine(out.readSide.get());
@@ -133,6 +138,8 @@ Path SSHMaster::startMaster()
     logger->pause();
     Finally cleanup = [&]() { logger->resume(); };
 
+    bool wasMasterRunning = isMasterRunning();
+
     state->sshMaster = startProcess([&]() {
         restoreProcessContext();
 
@@ -152,13 +159,15 @@ Path SSHMaster::startMaster()
 
     out.writeSide = -1;
 
-    std::string reply;
+    if (!wasMasterRunning) {
-    try {
+        std::string reply;
-        reply = readLine(out.readSide.get());
+        try {
-    } catch (EndOfFile & e) { }
+            reply = readLine(out.readSide.get());
+        } catch (EndOfFile & e) { }
 
-    if (reply != "started")
+        if (reply != "started")
-        throw Error("failed to start SSH master connection to '%s'", host);
+            throw Error("failed to start SSH master connection to '%s'", host);
+    }
 
     return state->socketPath;
 }

src/libstore/ssh.hh

@@ -28,6 +28,7 @@ private:
     Sync<State> state_;
 
     void addCommonSSHOpts(Strings & args);
+    bool isMasterRunning();
 
 public:
 

src/libstore/store-api.hh

@@ -679,8 +679,7 @@ public:
      * Repair the contents of the given path by redownloading it using
      * a substituter (if available).
      */
-    virtual void repairPath(const StorePath & path)
+    virtual void repairPath(const StorePath & path);
-    { unsupported("repairPath"); }
 
     /**
      * Add signatures to the specified store path. The signatures are

src/libstore/tests/downstream-placeholder.cc

@@ -0,0 +1,33 @@
+#include <gtest/gtest.h>
+
+#include "downstream-placeholder.hh"
+
+namespace nix {
+
+TEST(DownstreamPlaceholder, unknownCaOutput) {
+    ASSERT_EQ(
+        DownstreamPlaceholder::unknownCaOutput(
+            StorePath { "g1w7hy3qg1w7hy3qg1w7hy3qg1w7hy3q-foo.drv" },
+            "out").render(),
+        "/0c6rn30q4frawknapgwq386zq358m8r6msvywcvc89n6m5p2dgbz");
+}
+
+TEST(DownstreamPlaceholder, unknownDerivation) {
+    /**
+     * We set these in tests rather than the regular globals so we don't have
+     * to worry about race conditions if the tests run concurrently.
+     */
+    ExperimentalFeatureSettings mockXpSettings;
+    mockXpSettings.set("experimental-features", "dynamic-derivations ca-derivations");
+
+    ASSERT_EQ(
+        DownstreamPlaceholder::unknownDerivation(
+            DownstreamPlaceholder::unknownCaOutput(
+                StorePath { "g1w7hy3qg1w7hy3qg1w7hy3qg1w7hy3q-foo.drv.drv" },
+                "out"),
+            "out",
+            mockXpSettings).render(),
+        "/0gn6agqxjyyalf0dpihgyf49xq5hqxgw100f0wydnj6yqrhqsb3w");
+}
+
+}

src/libstore/worker-protocol.cc

@@ -0,0 +1,192 @@
+#include "serialise.hh"
+#include "util.hh"
+#include "path-with-outputs.hh"
+#include "store-api.hh"
+#include "build-result.hh"
+#include "worker-protocol.hh"
+#include "archive.hh"
+#include "derivations.hh"
+
+#include <nlohmann/json.hpp>
+
+namespace nix {
+
+std::string WorkerProto<std::string>::read(const Store & store, Source & from)
+{
+    return readString(from);
+}
+
+void WorkerProto<std::string>::write(const Store & store, Sink & out, const std::string & str)
+{
+    out << str;
+}
+
+
+StorePath WorkerProto<StorePath>::read(const Store & store, Source & from)
+{
+    return store.parseStorePath(readString(from));
+}
+
+void WorkerProto<StorePath>::write(const Store & store, Sink & out, const StorePath & storePath)
+{
+    out << store.printStorePath(storePath);
+}
+
+
+std::optional<TrustedFlag> WorkerProto<std::optional<TrustedFlag>>::read(const Store & store, Source & from)
+{
+    auto temp = readNum<uint8_t>(from);
+    switch (temp) {
+        case 0:
+            return std::nullopt;
+        case 1:
+            return { Trusted };
+        case 2:
+            return { NotTrusted };
+        default:
+            throw Error("Invalid trusted status from remote");
+    }
+}
+
+void WorkerProto<std::optional<TrustedFlag>>::write(const Store & store, Sink & out, const std::optional<TrustedFlag> & optTrusted)
+{
+    if (!optTrusted)
+        out << (uint8_t)0;
+    else {
+        switch (*optTrusted) {
+        case Trusted:
+            out << (uint8_t)1;
+            break;
+        case NotTrusted:
+            out << (uint8_t)2;
+            break;
+        default:
+            assert(false);
+        };
+    }
+}
+
+
+ContentAddress WorkerProto<ContentAddress>::read(const Store & store, Source & from)
+{
+    return ContentAddress::parse(readString(from));
+}
+
+void WorkerProto<ContentAddress>::write(const Store & store, Sink & out, const ContentAddress & ca)
+{
+    out << renderContentAddress(ca);
+}
+
+
+DerivedPath WorkerProto<DerivedPath>::read(const Store & store, Source & from)
+{
+    auto s = readString(from);
+    return DerivedPath::parseLegacy(store, s);
+}
+
+void WorkerProto<DerivedPath>::write(const Store & store, Sink & out, const DerivedPath & req)
+{
+    out << req.to_string_legacy(store);
+}
+
+
+Realisation WorkerProto<Realisation>::read(const Store & store, Source & from)
+{
+    std::string rawInput = readString(from);
+    return Realisation::fromJSON(
+        nlohmann::json::parse(rawInput),
+        "remote-protocol"
+    );
+}
+
+void WorkerProto<Realisation>::write(const Store & store, Sink & out, const Realisation & realisation)
+{
+    out << realisation.toJSON().dump();
+}
+
+
+DrvOutput WorkerProto<DrvOutput>::read(const Store & store, Source & from)
+{
+    return DrvOutput::parse(readString(from));
+}
+
+void WorkerProto<DrvOutput>::write(const Store & store, Sink & out, const DrvOutput & drvOutput)
+{
+    out << drvOutput.to_string();
+}
+
+
+KeyedBuildResult WorkerProto<KeyedBuildResult>::read(const Store & store, Source & from)
+{
+    auto path = WorkerProto<DerivedPath>::read(store, from);
+    auto br = WorkerProto<BuildResult>::read(store, from);
+    return KeyedBuildResult {
+        std::move(br),
+        /* .path = */ std::move(path),
+    };
+}
+
+void WorkerProto<KeyedBuildResult>::write(const Store & store, Sink & to, const KeyedBuildResult & res)
+{
+    workerProtoWrite(store, to, res.path);
+    workerProtoWrite(store, to, static_cast<const BuildResult &>(res));
+}
+
+
+BuildResult WorkerProto<BuildResult>::read(const Store & store, Source & from)
+{
+    BuildResult res;
+    res.status = (BuildResult::Status) readInt(from);
+    from
+        >> res.errorMsg
+        >> res.timesBuilt
+        >> res.isNonDeterministic
+        >> res.startTime
+        >> res.stopTime;
+    auto builtOutputs = WorkerProto<DrvOutputs>::read(store, from);
+    for (auto && [output, realisation] : builtOutputs)
+        res.builtOutputs.insert_or_assign(
+            std::move(output.outputName),
+            std::move(realisation));
+    return res;
+}
+
+void WorkerProto<BuildResult>::write(const Store & store, Sink & to, const BuildResult & res)
+{
+    to
+        << res.status
+        << res.errorMsg
+        << res.timesBuilt
+        << res.isNonDeterministic
+        << res.startTime
+        << res.stopTime;
+    DrvOutputs builtOutputs;
+    for (auto & [output, realisation] : res.builtOutputs)
+        builtOutputs.insert_or_assign(realisation.id, realisation);
+    workerProtoWrite(store, to, builtOutputs);
+}
+
+
+std::optional<StorePath> WorkerProto<std::optional<StorePath>>::read(const Store & store, Source & from)
+{
+    auto s = readString(from);
+    return s == "" ? std::optional<StorePath> {} : store.parseStorePath(s);
+}
+
+void WorkerProto<std::optional<StorePath>>::write(const Store & store, Sink & out, const std::optional<StorePath> & storePathOpt)
+{
+    out << (storePathOpt ? store.printStorePath(*storePathOpt) : "");
+}
+
+
+std::optional<ContentAddress> WorkerProto<std::optional<ContentAddress>>::read(const Store & store, Source & from)
+{
+    return ContentAddress::parseOpt(readString(from));
+}
+
+void WorkerProto<std::optional<ContentAddress>>::write(const Store & store, Sink & out, const std::optional<ContentAddress> & caOpt)
+{
+    out << (caOpt ? renderContentAddress(*caOpt) : "");
+}
+
+}

src/libstore/worker-protocol.hh

@@ -1,7 +1,6 @@
 #pragma once
 ///@file
 
-#include "store-api.hh"
 #include "serialise.hh"
 
 namespace nix {
@@ -79,41 +78,81 @@ typedef enum {
 class Store;
 struct Source;
 
+// items being serialized
+struct DerivedPath;
+struct DrvOutput;
+struct Realisation;
+struct BuildResult;
+struct KeyedBuildResult;
+enum TrustedFlag : bool;
+
+
 /**
- * Used to guide overloading
+ * Data type for canonical pairs of serializers for the worker protocol.
  *
  * See https://en.cppreference.com/w/cpp/language/adl for the broader
  * concept of what is going on here.
  */
 template<typename T>
-struct Phantom {};
+struct WorkerProto {
+    static T read(const Store & store, Source & from);
+    static void write(const Store & store, Sink & out, const T & t);
+};
 
+/**
+ * Wrapper function around `WorkerProto<T>::write` that allows us to
+ * infer the type instead of having to write it down explicitly.
+ */
+template<typename T>
+void workerProtoWrite(const Store & store, Sink & out, const T & t)
+{
+    WorkerProto<T>::write(store, out, t);
+}
 
-namespace worker_proto {
+/**
-/* FIXME maybe move more stuff inside here */
+ * Declare a canonical serializer pair for the worker protocol.
+ *
+ * We specialize the struct merely to indicate that we are implementing
+ * the function for the given type.
+ *
+ * Some sort of `template<...>` must be used with the caller for this to
+ * be legal specialization syntax. See below for what that looks like in
+ * practice.
+ */
+#define MAKE_WORKER_PROTO(T) \
+    struct WorkerProto< T > { \
+        static T read(const Store & store, Source & from); \
+        static void write(const Store & store, Sink & out, const T & t); \
+    };
 
-#define MAKE_WORKER_PROTO(TEMPLATE, T) \
+template<>
-    TEMPLATE T read(const Store & store, Source & from, Phantom< T > _); \
+MAKE_WORKER_PROTO(std::string);
-    TEMPLATE void write(const Store & store, Sink & out, const T & str)
+template<>
+MAKE_WORKER_PROTO(StorePath);
+template<>
+MAKE_WORKER_PROTO(ContentAddress);
+template<>
+MAKE_WORKER_PROTO(DerivedPath);
+template<>
+MAKE_WORKER_PROTO(Realisation);
+template<>
+MAKE_WORKER_PROTO(DrvOutput);
+template<>
+MAKE_WORKER_PROTO(BuildResult);
+template<>
+MAKE_WORKER_PROTO(KeyedBuildResult);
+template<>
+MAKE_WORKER_PROTO(std::optional<TrustedFlag>);
 
-MAKE_WORKER_PROTO(, std::string);
+template<typename T>
-MAKE_WORKER_PROTO(, StorePath);
+MAKE_WORKER_PROTO(std::vector<T>);
-MAKE_WORKER_PROTO(, ContentAddress);
+template<typename T>
-MAKE_WORKER_PROTO(, DerivedPath);
+MAKE_WORKER_PROTO(std::set<T>);
-MAKE_WORKER_PROTO(, Realisation);
-MAKE_WORKER_PROTO(, DrvOutput);
-MAKE_WORKER_PROTO(, BuildResult);
-MAKE_WORKER_PROTO(, KeyedBuildResult);
-MAKE_WORKER_PROTO(, std::optional<TrustedFlag>);
 
-MAKE_WORKER_PROTO(template<typename T>, std::vector<T>);
+template<typename K, typename V>
-MAKE_WORKER_PROTO(template<typename T>, std::set<T>);
+#define X_ std::map<K, V>
-
+MAKE_WORKER_PROTO(X_);
-#define X_ template<typename K, typename V>
-#define Y_ std::map<K, V>
-MAKE_WORKER_PROTO(X_, Y_);
 #undef X_
-#undef Y_
 
 /**
  * These use the empty string for the null case, relying on the fact
@@ -129,72 +168,72 @@ MAKE_WORKER_PROTO(X_, Y_);
  * worker protocol harder to implement in other languages where such
  * specializations may not be allowed.
  */
-MAKE_WORKER_PROTO(, std::optional<StorePath>);
+template<>
-MAKE_WORKER_PROTO(, std::optional<ContentAddress>);
+MAKE_WORKER_PROTO(std::optional<StorePath>);
+template<>
+MAKE_WORKER_PROTO(std::optional<ContentAddress>);
 
 template<typename T>
-std::vector<T> read(const Store & store, Source & from, Phantom<std::vector<T>> _)
+std::vector<T> WorkerProto<std::vector<T>>::read(const Store & store, Source & from)
 {
     std::vector<T> resSet;
     auto size = readNum<size_t>(from);
     while (size--) {
-        resSet.push_back(read(store, from, Phantom<T> {}));
+        resSet.push_back(WorkerProto<T>::read(store, from));
     }
     return resSet;
 }
 
 template<typename T>
-void write(const Store & store, Sink & out, const std::vector<T> & resSet)
+void WorkerProto<std::vector<T>>::write(const Store & store, Sink & out, const std::vector<T> & resSet)
 {
     out << resSet.size();
     for (auto & key : resSet) {
-        write(store, out, key);
+        WorkerProto<T>::write(store, out, key);
     }
 }
 
 template<typename T>
-std::set<T> read(const Store & store, Source & from, Phantom<std::set<T>> _)
+std::set<T> WorkerProto<std::set<T>>::read(const Store & store, Source & from)
 {
     std::set<T> resSet;
     auto size = readNum<size_t>(from);
     while (size--) {
-        resSet.insert(read(store, from, Phantom<T> {}));
+        resSet.insert(WorkerProto<T>::read(store, from));
     }
     return resSet;
 }
 
 template<typename T>
-void write(const Store & store, Sink & out, const std::set<T> & resSet)
+void WorkerProto<std::set<T>>::write(const Store & store, Sink & out, const std::set<T> & resSet)
 {
     out << resSet.size();
     for (auto & key : resSet) {
-        write(store, out, key);
+        WorkerProto<T>::write(store, out, key);
     }
 }
 
 template<typename K, typename V>
-std::map<K, V> read(const Store & store, Source & from, Phantom<std::map<K, V>> _)
+std::map<K, V> WorkerProto<std::map<K, V>>::read(const Store & store, Source & from)
 {
     std::map<K, V> resMap;
     auto size = readNum<size_t>(from);
     while (size--) {
-        auto k = read(store, from, Phantom<K> {});
+        auto k = WorkerProto<K>::read(store, from);
-        auto v = read(store, from, Phantom<V> {});
+        auto v = WorkerProto<V>::read(store, from);
         resMap.insert_or_assign(std::move(k), std::move(v));
     }
     return resMap;
 }
 
 template<typename K, typename V>
-void write(const Store & store, Sink & out, const std::map<K, V> & resMap)
+void WorkerProto<std::map<K, V>>::write(const Store & store, Sink & out, const std::map<K, V> & resMap)
 {
     out << resMap.size();
     for (auto & i : resMap) {
-        write(store, out, i.first);
+        WorkerProto<K>::write(store, out, i.first);
-        write(store, out, i.second);
+        WorkerProto<V>::write(store, out, i.second);
     }
 }
 
 }
-
-}

src/libutil/experimental-features.cc

@@ -207,6 +207,9 @@ constexpr std::array<ExperimentalFeatureDetails, 14> xpFeatureDetails = {{
 
               - "text hashing" derivation outputs, so we can build .drv
                 files.
+
+              - dependencies in derivations on the outputs of
+                derivations that are themselves derivations outputs.
         )",
     },
     {

src/libutil/util.cc

@@ -1141,9 +1141,9 @@ std::vector<char *> stringsToCharPtrs(const Strings & ss)
 }
 
 std::string runProgram(Path program, bool searchPath, const Strings & args,
-    const std::optional<std::string> & input)
+    const std::optional<std::string> & input, bool isInteractive)
 {
-    auto res = runProgram(RunOptions {.program = program, .searchPath = searchPath, .args = args, .input = input});
+    auto res = runProgram(RunOptions {.program = program, .searchPath = searchPath, .args = args, .input = input, .isInteractive = isInteractive});
 
     if (!statusOk(res.first))
         throw ExecError(res.first, "program '%1%' %2%", program, statusToString(res.first));
@@ -1193,6 +1193,16 @@ void runProgram2(const RunOptions & options)
     // case), so we can't use it if we alter the environment
     processOptions.allowVfork = !options.environment;
 
+    std::optional<Finally<std::function<void()>>> resumeLoggerDefer;
+    if (options.isInteractive) {
+        logger->pause();
+        resumeLoggerDefer.emplace(
+            []() {
+                logger->resume();
+            }
+        );
+    }
+
     /* Fork. */
     Pid pid = startProcess([&]() {
         if (options.environment)

src/libutil/util.hh

@@ -415,7 +415,7 @@ pid_t startProcess(std::function<void()> fun, const ProcessOptions & options = P
  */
 std::string runProgram(Path program, bool searchPath = false,
     const Strings & args = Strings(),
-    const std::optional<std::string> & input = {});
+    const std::optional<std::string> & input = {}, bool isInteractive = false);
 
 struct RunOptions
 {
@@ -430,6 +430,7 @@ struct RunOptions
     Source * standardIn = nullptr;
     Sink * standardOut = nullptr;
     bool mergeStderrToStdout = false;
+    bool isInteractive = false;
 };
 
 std::pair<int, std::string> runProgram(RunOptions && options);

src/nix-store/nix-store.cc

@@ -849,7 +849,7 @@ static void opServe(Strings opFlags, Strings opArgs)
             case cmdQueryValidPaths: {
                 bool lock = readInt(in);
                 bool substitute = readInt(in);
-                auto paths = worker_proto::read(*store, in, Phantom<StorePathSet> {});
+                auto paths = WorkerProto<StorePathSet>::read(*store, in);
                 if (lock && writeAllowed)
                     for (auto & path : paths)
                         store->addTempRoot(path);
@@ -858,19 +858,19 @@ static void opServe(Strings opFlags, Strings opArgs)
                     store->substitutePaths(paths);
                 }
 
-                worker_proto::write(*store, out, store->queryValidPaths(paths));
+                workerProtoWrite(*store, out, store->queryValidPaths(paths));
                 break;
             }
 
             case cmdQueryPathInfos: {
-                auto paths = worker_proto::read(*store, in, Phantom<StorePathSet> {});
+                auto paths = WorkerProto<StorePathSet>::read(*store, in);
                 // !!! Maybe we want a queryPathInfos?
                 for (auto & i : paths) {
                     try {
                         auto info = store->queryPathInfo(i);
                         out << store->printStorePath(info->path)
                             << (info->deriver ? store->printStorePath(*info->deriver) : "");
-                        worker_proto::write(*store, out, info->references);
+                        workerProtoWrite(*store, out, info->references);
                         // !!! Maybe we want compression?
                         out << info->narSize // downloadSize
                             << info->narSize;
@@ -898,7 +898,7 @@ static void opServe(Strings opFlags, Strings opArgs)
 
             case cmdExportPaths: {
                 readInt(in); // obsolete
-                store->exportPaths(worker_proto::read(*store, in, Phantom<StorePathSet> {}), out);
+                store->exportPaths(WorkerProto<StorePathSet>::read(*store, in), out);
                 break;
             }
 
@@ -944,7 +944,7 @@ static void opServe(Strings opFlags, Strings opArgs)
                     DrvOutputs builtOutputs;
                     for (auto & [output, realisation] : status.builtOutputs)
                         builtOutputs.insert_or_assign(realisation.id, realisation);
-                    worker_proto::write(*store, out, builtOutputs);
+                    workerProtoWrite(*store, out, builtOutputs);
                 }
 
                 break;
@@ -953,9 +953,9 @@ static void opServe(Strings opFlags, Strings opArgs)
             case cmdQueryClosure: {
                 bool includeOutputs = readInt(in);
                 StorePathSet closure;
-                store->computeFSClosure(worker_proto::read(*store, in, Phantom<StorePathSet> {}),
+                store->computeFSClosure(WorkerProto<StorePathSet>::read(*store, in),
                     closure, false, includeOutputs);
-                worker_proto::write(*store, out, closure);
+                workerProtoWrite(*store, out, closure);
                 break;
             }
 
@@ -970,7 +970,7 @@ static void opServe(Strings opFlags, Strings opArgs)
                 };
                 if (deriver != "")
                     info.deriver = store->parseStorePath(deriver);
-                info.references = worker_proto::read(*store, in, Phantom<StorePathSet> {});
+                info.references = WorkerProto<StorePathSet>::read(*store, in);
                 in >> info.registrationTime >> info.narSize >> info.ultimate;
                 info.sigs = readStrings<StringSet>(in);
                 info.ca = ContentAddress::parseOpt(readString(in));

src/nix/app.cc

@@ -7,6 +7,7 @@
 #include "names.hh"
 #include "command.hh"
 #include "derivations.hh"
+#include "downstream-placeholder.hh"
 
 namespace nix {
 
@@ -23,7 +24,7 @@ StringPairs resolveRewrites(
         if (auto drvDep = std::get_if<BuiltPathBuilt>(&dep.path))
             for (auto & [ outputName, outputPath ] : drvDep->outputs)
                 res.emplace(
-                    downstreamPlaceholder(store, drvDep->drvPath, outputName),
+                    DownstreamPlaceholder::unknownCaOutput(drvDep->drvPath, outputName).render(),
                     store.printStorePath(outputPath)
                 );
     return res;

src/nix/build.md

@@ -44,7 +44,7 @@ R""(
   `release.nix`:
 
   ```console
-  # nix build -f release.nix build.x86_64-linux
+  # nix build --file release.nix build.x86_64-linux
   ```
 
 * Build a NixOS system configuration from a flake, and make a profile

src/nix/copy.md

@@ -15,7 +15,7 @@ R""(
   SSH:
 
   ```console
-  # nix copy -s --to ssh://server /run/current-system
+  # nix copy --substitute-on-destination --to ssh://server /run/current-system
   ```
 
   The `-s` flag causes the remote machine to try to substitute missing

src/nix/develop.md

@@ -69,7 +69,7 @@ R""(
 * Run a series of script commands:
 
   ```console
-  # nix develop --command bash -c "mkdir build && cmake .. && make"
+  # nix develop --command bash --command "mkdir build && cmake .. && make"
   ```
 
 # Description

src/nix/eval.md

@@ -18,7 +18,7 @@ R""(
 * Evaluate a Nix expression from a file:
 
   ```console
-  # nix eval -f ./my-nixpkgs hello.name
+  # nix eval --file ./my-nixpkgs hello.name
   ```
 
 * Get the current version of the `nixpkgs` flake:

src/nix/flake-check.md

@@ -68,6 +68,6 @@ The following flake output attributes must be
 In addition, the `hydraJobs` output is evaluated in the same way as
 Hydra's `hydra-eval-jobs` (i.e. as a arbitrarily deeply nested
 attribute set of derivations). Similarly, the
-`legacyPackages`.*system* output is evaluated like `nix-env -qa`.
+`legacyPackages`.*system* output is evaluated like `nix-env --query --available `.
 
 )""

src/nix/nar-ls.md

@@ -5,7 +5,7 @@ R""(
 * To list a specific file in a NAR:
 
   ```console
-  # nix nar ls -l ./hello.nar /bin/hello
+  # nix nar ls --long ./hello.nar /bin/hello
   -r-xr-xr-x                38184 hello
   ```
 
@@ -13,7 +13,7 @@ R""(
   format:
 
   ```console
-  # nix nar ls --json -R ./hello.nar /bin
+  # nix nar ls --json --recursive ./hello.nar /bin
   {"type":"directory","entries":{"hello":{"type":"regular","size":38184,"executable":true,"narOffset":400}}}
   ```
 

src/nix/nix.md

@@ -197,7 +197,7 @@ operate are determined as follows:
   of all outputs of the `glibc` package in the binary cache:
 
   ```console
-  # nix path-info -S --eval-store auto --store https://cache.nixos.org 'nixpkgs#glibc^*'
+  # nix path-info --closure-size --eval-store auto --store https://cache.nixos.org 'nixpkgs#glibc^*'
   /nix/store/g02b1lpbddhymmcjb923kf0l7s9nww58-glibc-2.33-123                 33208200
   /nix/store/851dp95qqiisjifi639r0zzg5l465ny4-glibc-2.33-123-bin             36142896
   /nix/store/kdgs3q6r7xdff1p7a9hnjr43xw2404z7-glibc-2.33-123-debug          155787312
@@ -208,7 +208,7 @@ operate are determined as follows:
   and likewise, using a store path to a "drv" file to specify the derivation:
 
   ```console
-  # nix path-info -S '/nix/store/gzaflydcr6sb3567hap9q6srzx8ggdgg-glibc-2.33-78.drv^*'
+  # nix path-info --closure-size '/nix/store/gzaflydcr6sb3567hap9q6srzx8ggdgg-glibc-2.33-78.drv^*'
   …
   ```
 * If you didn't specify the desired outputs, but the derivation has an

src/nix/path-info.md

@@ -13,7 +13,7 @@ R""(
   closure, sorted by size:
 
   ```console
-  # nix path-info -rS /run/current-system | sort -nk2
+  # nix path-info --recursive --closure-size /run/current-system | sort -nk2
   /nix/store/hl5xwp9kdrd1zkm0idm3kkby9q66z404-empty                                                96
   /nix/store/27324qvqhnxj3rncazmxc4mwy79kz8ha-nameservers                                         112
   …
@@ -25,7 +25,7 @@ R""(
   readable sizes:
 
   ```console
-  # nix path-info -rsSh nixpkgs#rustc
+  # nix path-info --recursive --size --closure-size --human-readable nixpkgs#rustc
   /nix/store/01rrgsg5zk3cds0xgdsq40zpk6g51dz9-ncurses-6.2-dev      386.7K   69.1M
   /nix/store/0q783wnvixpqz6dxjp16nw296avgczam-libpfm-4.11.0          5.9M   37.4M
   …
@@ -34,7 +34,7 @@ R""(
 * Check the existence of a path in a binary cache:
 
   ```console
-  # nix path-info -r /nix/store/blzxgyvrk32ki6xga10phr4sby2xf25q-geeqie-1.5.1 --store https://cache.nixos.org/
+  # nix path-info --recursive /nix/store/blzxgyvrk32ki6xga10phr4sby2xf25q-geeqie-1.5.1 --store https://cache.nixos.org/
   path '/nix/store/blzxgyvrk32ki6xga10phr4sby2xf25q-geeqie-1.5.1' is not valid
 
   ```
@@ -57,7 +57,7 @@ R""(
   size:
 
   ```console
-  # nix path-info --json --all -S \
+  # nix path-info --json --all --closure-size \
     | jq 'map(select(.closureSize > 1e9)) | sort_by(.closureSize) | map([.path, .closureSize])'
   [
     …,

src/nix/search.md

@@ -52,12 +52,12 @@ R""(
 * Search for packages containing `neovim` but hide ones containing either `gui` or `python`:
 
   ```console
-  # nix search nixpkgs neovim -e 'python|gui'
+  # nix search nixpkgs neovim --exclude 'python|gui'
   ```
   or
 
   ```console
-  # nix search nixpkgs neovim -e 'python' -e 'gui'
+  # nix search nixpkgs neovim --exclude 'python' --exclude 'gui'
   ```
 
 # Description

src/nix/shell.md

@@ -19,26 +19,26 @@ R""(
 * Run GNU Hello:
 
   ```console
-  # nix shell nixpkgs#hello -c hello --greeting 'Hi everybody!'
+  # nix shell nixpkgs#hello --command hello --greeting 'Hi everybody!'
   Hi everybody!
   ```
 
 * Run multiple commands in a shell environment:
 
   ```console
-  # nix shell nixpkgs#gnumake -c sh -c "cd src && make"
+  # nix shell nixpkgs#gnumake --command sh --command "cd src && make"
   ```
 
 * Run GNU Hello in a chroot store:
 
   ```console
-  # nix shell --store ~/my-nix nixpkgs#hello -c hello
+  # nix shell --store ~/my-nix nixpkgs#hello --command hello
   ```
 
 * Start a shell providing GNU Hello in a chroot store:
 
   ```console
-  # nix shell --store ~/my-nix nixpkgs#hello nixpkgs#bashInteractive -c bash
+  # nix shell --store ~/my-nix nixpkgs#hello nixpkgs#bashInteractive --command bash
   ```
 
   Note that it's necessary to specify `bash` explicitly because your

src/nix/store-ls.md

@@ -5,7 +5,7 @@ R""(
 * To list the contents of a store path in a binary cache:
 
   ```console
-  # nix store ls --store https://cache.nixos.org/ -lR /nix/store/0i2jd68mp5g6h2sa5k9c85rb80sn8hi9-hello-2.10
+  # nix store ls --store https://cache.nixos.org/ --long --recursive /nix/store/0i2jd68mp5g6h2sa5k9c85rb80sn8hi9-hello-2.10
   dr-xr-xr-x                    0 ./bin
   -r-xr-xr-x                38184 ./bin/hello
   dr-xr-xr-x                    0 ./share
@@ -15,7 +15,7 @@ R""(
 * To show information about a specific file in a binary cache:
 
   ```console
-  # nix store ls --store https://cache.nixos.org/ -l /nix/store/0i2jd68mp5g6h2sa5k9c85rb80sn8hi9-hello-2.10/bin/hello
+  # nix store ls --store https://cache.nixos.org/ --long /nix/store/0i2jd68mp5g6h2sa5k9c85rb80sn8hi9-hello-2.10/bin/hello
   -r-xr-xr-x                38184 hello
   ```
 

src/nix/upgrade-nix.md

@@ -11,7 +11,7 @@ R""(
 * Upgrade Nix in a specific profile:
 
   ```console
-  # nix upgrade-nix -p ~alice/.local/state/nix/profiles/profile
+  # nix upgrade-nix --profile ~alice/.local/state/nix/profiles/profile
   ```
 
 # Description

src/nix/verify.md

@@ -12,7 +12,7 @@ R""(
   signatures:
 
   ```console
-  # nix store verify -r -n2 --no-contents $(type -p firefox)
+  # nix store verify --recursive --sigs-needed 2 --no-contents $(type -p firefox)
   ```
 
 * Verify a store path in the binary cache `https://cache.nixos.org/`:

tests/nixos/nix-copy.nix

@@ -23,6 +23,12 @@ in {
           nix.settings.substituters = lib.mkForce [ ];
           nix.settings.experimental-features = [ "nix-command" ];
           services.getty.autologinUser = "root";
+          programs.ssh.extraConfig = ''
+            Host *
+                ControlMaster auto
+                ControlPath ~/.ssh/master-%h:%r@%n:%p
+                ControlPersist 15m
+          '';
         };
 
       server =
@@ -62,6 +68,10 @@ in {
     client.wait_for_text("done")
     server.succeed("nix-store --check-validity ${pkgA}")
 
+    # Check that ControlMaster is working
+    client.send_chars("nix copy --to ssh://server ${pkgA} >&2; echo done\n")
+    client.wait_for_text("done")
+
     client.copy_from_host("key", "/root/.ssh/id_ed25519")
     client.succeed("chmod 600 /root/.ssh/id_ed25519")