MemoryInputAccessor is an in-memory virtual filesystem that returns
files like <nix/fetchurl.nix>. This removes the need for special hacks
to handle those files.
Add a new experimental `impure-env` setting that is a key-value list of
environment variables to inject into FOD derivations that specify the
corresponding `impureEnvVars`.
This allows clients to make use of this feature (without having to change the
environment of the daemon itself) and might eventually deprecate the current
behaviour (pick whatever is in the environment of the daemon) as it's more
principled and might prevent information leakage.
This introduces some shared infrastructure for our notion of protocols.
We can then define multiple protocols in terms of that notion.
We an also express how particular protocols depend on each other.
For example, we can define a common protocol and a worker protocol,
where the second depends on the first in terms of the data types it can
read and write.
The "serve" protocol can just use the common one for now, but will
eventually need its own machinary just like the worker protocol for
version-aware serialisers
For people working on Nix with `nix develop`, it's better to just use
`autoreconfPhase` and `configurePhase`, which is standard Nixpkgs / nix
shell make from Nixpkgs practice --- it is good to emphasize the degree
to which Nix is *just* a regular C++ project which can be worked on in
the regular way.
(For people running `nix-shell`, the story is similar, except
`configurePhase` would use non-writable store paths, which matters for
hte times we use output paths before `make install`, so I kept the
existing `./configure ...` instruction.)
For people building Nix without Nix (e.g. packaging it for another
distro) they also don't need `bootstrap.sh`, and can just run
`autoreconf -vfi` directly. (More likely, they have their own idioms to
do this just as we have `autoreconfPhase`.)
I was sleepy and confused that "interpolated expression" was a new type of thing at first. This nudges the reader to understand that its just a regular expression, and these conditions are imposed by the interpolation operation.
I think it is bad for these reasons when `tests/` contains a mix of
functional and integration tests
- Concepts is harder to understand, the documentation makes a good
unit vs functional vs integration distinction, but when the
integration tests are just two subdirs within `tests/` this is not
clear.
- Source filtering in the `flake.nix` is more complex. We need to
filter out some of the dirs from `tests/`, rather than simply pick
the dirs we want and take all of them. This is a good sign the
structure of what we are trying to do is not matching the structure
of the files.
With this change we have a clean:
```shell-session
$ git show 'HEAD:tests'
tree HEAD:tests
functional/
installer/
nixos/
```
the `term` output mode leaves inline HTML around verbatim, while `nroff`
mode (used for `man` pages) does not.
the correct solution would be to pre-render all output with a more
benign tool so we have less liabilities in our own code, but this has to
do for now.
In #4770 I implemented proper `nix-shell(1)` support for derivations
using `__structuredAttrs = true;`. Back then we decided to introduce two
new environment variables, `NIX_ATTRS_SH_FILE` for `.attrs.sh` and
`NIX_ATTRS_JSON_FILE` for `.attrs.json`. This was to avoid having to
copy these files to `$NIX_BUILD_TOP` in a `nix-shell(1)` session which
effectively meant copying these files to the project dir without
cleaning up afterwords[1].
On last NixCon I resumed hacking on `__structuredAttrs = true;` by
default for `nixpkgs` with a few other folks and getting back to it,
I identified a few problems with the how it's used in `nixpkgs`:
* A lot of builders in `nixpkgs` don't care about the env vars and
assume that `.attrs.sh` and `.attrs.json` are in `$NIX_BUILD_TOP`.
The sole reason why this works is that `nix-shell(1)` sources
the contents of `.attrs.sh` and then sources `$stdenv/setup` if it
exists. This may not be pretty, but it mostly works. One notable
difference when using nixpkgs' stdenv as of now is however that
`$__structuredAttrs` is set to `1` on regular builds, but set to
an empty string in a shell session.
Also, `.attrs.json` cannot be used in shell sessions because
it can only be accessed by `$NIX_ATTRS_JSON_FILE` and not by
`$NIX_BUILD_TOP/.attrs.json`.
I considered changing Nix to be compatible with what nixpkgs
effectively does, but then we'd have to either move $NIX_BUILD_TOP for
shell sessions to a temporary location (and thus breaking a lot of
assumptions) or we'd reintroduce all the problems we solved back then
by using these two env vars.
This is partly because I didn't document these variables back
then (mea culpa), so I decided to drop all mentions of
`.attrs.{json,sh}` in the manual and only refer to `$NIX_ATTRS_SH_FILE`
and `$NIX_ATTRS_JSON_FILE`. The same applies to all our integration tests.
Theoretically we could deprecated using `"$NIX_BUILD_TOP"/.attrs.sh` in
the future now.
* `nix develop` and `nix print-dev-env` don't support this environment
variable at all even though they're supposed to be part of the replacement
for `nix-shell` - for the drv debugging part to be precise.
This isn't a big deal for the vast majority of derivations, i.e.
derivations relying on nixpkgs' `stdenv` wiring things together
properly. This is because `nix develop` effectively "clones" the
derivation and replaces the builder with a script that dumps all of
the environment, shell variables, functions etc, so the state of
structured attrs being "sourced" is transmitted into the dev shell and
most of the time you don't need to worry about `.attrs.sh` not
existing because the shell is correctly configured and the
if [ -e .attrs.sh ]; then source .attrs.sh; fi
is simply omitted.
However, this will break when having a derivation that reads e.g. from
`.attrs.json` like
with import <nixpkgs> {};
runCommand "foo" { __structuredAttrs = true; foo.bar = 23; } ''
cat $NIX_ATTRS_JSON_FILE # doesn't work because it points to /build/.attrs.json
''
To work around this I employed a similar approach as it exists for
`nix-shell`: the `NIX_ATTRS_{JSON,SH}_FILE` vars are replaced with
temporary locations.
The contents of `.attrs.sh` and `.attrs.json` are now written into the
JSON by `get-env.sh`, the builder that `nix develop` injects into the
derivation it's debugging. So finally the exact file contents are
present and exported by `nix develop`.
I also made `.attrs.json` a JSON string in the JSON printed by
`get-env.sh` on purpose because then it's not necessary to serialize
the object structure again. `nix develop` only needs the JSON
as string because it's only written into the temporary file.
I'm not entirely sure if it makes sense to also use a temporary
location for `nix print-dev-env` (rather than just skipping the
rewrite in there), but this would probably break certain cases where
it's relied upon `$NIX_ATTRS_SH_FILE` to exist (prime example are the
`nix print-dev-env` test-cases I wrote in this patch using
`tests/shell.nix`, these would fail because the env var exists, but it
cannot read from it).
[1] https://github.com/NixOS/nix/pull/4770#issuecomment-836799719
* document "Import From Derivation"
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: John Ericson <git@JohnEricson.me>
make the example more realistic, since `headers` is not an output name
used in Nixpkgs
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
derivations are about data transformation, so the term "build" does not
add any information. there was also some feedback that "build task" is
not more helpful than "derivation" if you have no prior experience with
Nix or build systems, while existing associations may be misleading.
Was confused why `make html` didn't work while working on #9032, but
then I realized that after this section was written, the target was
renamed to `manual-html` in 6910f5dcb6.
Before they were an "ad-hoc" header with bold and a colon; now they are
a proper subheader.
For the man pages, this doesn't make much of a difference, but it will
help more on for the HTML manual, where things can be restyled. Again,
good separation of content vs presentation.
Behavior change:
Before we only showed uption if the command-specific options were
non-empty. But that is somewhat odd since we also show common options.
Now, we do everything based on the union of both sorts of options (with
hidden-categories filtered, as before).
Implementation change:
The JSON dumping once again includes all options; the filtering of
hidden categories is done in the Nix instead. This is better separation
of "content" vs "presentation", and prepare the way for the HTML manual
vs manpages / `--help` doing different things.
there is a very confusing warning in the Nixpkgs manual that
mischaracterises `nix-env` behavior, and this example shows what's
really happening.
note that it doesn't use `pkgs.runCommand` or other `pkgs.stdenv`
facilities, as deep down those set `meta.outputsToInstall` to very
particular defaults that do not generally apply to Nix.
We use the same nested map representation we used for goals, again in
order to save space. We might someday want to combine with `inputDrvs`,
by doing `V = bool` instead of `V = std::set<OutputName>`, but we are
not doing that yet for sake of a smaller diff.
The ATerm format for Derivations also needs to be extended, in addition
to the in-memory format. To accomodate this, we added a new basic
versioning scheme, so old versions of Nix will get nice errors. (And
going forward, if the ATerm format changes again the errors will be even
better.)
`parsedStrings`, an internal function used as part of parsing
derivations in A-Term format, used to consume the final `]` but expect
the initial `[` to already be consumed. This made for what looked like
unbalanced brackets at callsites, which was confusing. Now it consumes
both which is hopefully less confusing.
As part of testing, we also created a unit test for the A-Term format for
regular non-experimental derivations too.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Apply suggestions from code review
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
this removes a lot of noise from the web search, which precludes finding
the actual documentation.
some configuration settings have enough documentation to warrant
individual pages, so the alternative of including full setting
documentation in each command page doesn't make much sense here.
this change technically means that the command line flags to override
settings are "invisible", and not exported as JSON. this may or may not
be desirable. a more explicit approach would be adding a `hidden` field
to the flag's JSON output, but would also require adjusting
post-processing of that JSON for manual rendering.
this is a pure reformatting, contents were not changed
one sentence per line makes reviewing diffs and making suggestions much
more convenient. the indentation was an artifat of the DocBook
migration.
Continue with the characterization testing idioms begun in
c70484454f, but this time for unit tests.
Co-authored-by: Andreas Rammhold <andreas@rammhold.de>
