The code works fine on macOS, but the default stack size we attempt to
set is larger than what my system will allow (Nix attempts to set the
stack size to 67108864, but the maximum allowed is 67092480), so I've
instead used the requested stack size or the maximum allowed, whichever
is smaller.
I've also added an error message if setting the stack size fails. It
looks like this:
> Failed to increase stack size from 8372224 to 67108864 (maximum
> allowed stack size: 67092480): Invalid argument
This extends the `error: cannot coerce a TYPE to a string` message
to print the value that could not be coerced. This helps with debugging
by making it easier to track down where the value is being produced
from, especially in errors with deep or unhelpful stack traces.
This is more conceptually correct (the order does not matter), and also
matches what Hydra already does.
(Nix and Hydra matching is needed for dedup
https://github.com/NixOS/hydra/issues/1164)
More invariants are enforced in the type, and less state needs to be
stored in the main sink itself. The method here is roughly that known as
"session types".
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
This avoids split-on-whitespace errors:
- No more `bash -c` needed
- No more `shellEscape` needed
- `remote-program` ssh store setting also cleanly supports args (e.g.
`nix daemon`)
- `ssh` uses `--` to separate args for SSH from args for the command to
run.
and will help with Hydra dedup.
Some code taken from #6628.
Co-Authored-By: Alexander Bantyev <balsoft@balsoft.ru>
Low-hanging fruit in the spirit of #9753 and #9754 (means 9999years did
all the hard work already).
This basically prints out what was attempted to be called as function,
i.e.
map (import <nixpkgs> {}) [ 1 2 3 ]
now gives the following error message:
error:
… while calling the 'map' builtin
at «string»:1:1:
1| map (import <nixpkgs> {}) [ 1 2 3 ]
| ^
… while evaluating the first argument passed to builtins.map
error: expected a function but found a set: { _type = "pkgs"; AAAAAASomeThingsFailToEvaluate = «thunk»; AMB-plugins = «thunk»; ArchiSteamFarm = «thunk»; BeatSaberModManager = «thunk»; CHOWTapeModel = «thunk»; ChowCentaur = «thunk»; ChowKick = «thunk»; ChowPhaser = «thunk»; CoinMP = «thunk»; «18783 attributes elided»}
Factor out `ServeProto::BasicClientConnection` for Hydra to share
- `queryValidPaths`: Hydra uses the lock argument differently than Nix,
so we un-hard-code it.
- `buildDerivationRequest`: Just the request half, as Hydra does some
things between requesting and responding.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Do this if we want to do `--hash-algo` everywhere, and not `--algo` for
hash commands.
The new `nix hash convert` is updated. Deprecated new CLI commands are
left as-is (`nix hash path` needs to be redone and is also left as-is).
Good to document these formats separately from commands that happen to
use them.
Eventually I would like this and `builtins.derivation` to refer to a
store section on derivations that is authoritative, but that doesn't yet
exist, and will take some time to make. So I think we're just best off
merging this now as is.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Return a value instead of throwing.
Rather than the more trivial refactor of wrapping the return value in
another std::optional, we retain the meaning of the outer optional:
"we know at least something."
So we have changed:
return nullopt -> return nullopt
throw InvalidPath -> return make_optional(nullptr)
return vpi -> return make_optional(vpi)
Add several tests for git fetching:
- shallow-cache-separation: can fetch the same repo shallowly and non-shallowly
- shallow-ignore-ref: ensure that ref gets ignored when shallow=true is set
- ssh-shallow: can fetch a git repo via ssh using shallow=1
libgit2 is not capable of using git-credentials helpers yet.
This prevents private repositories from being used.
Based on code that was replaced in https://github.com/NixOS/nix/pull/9240
(Introduce libgit2); hence:
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
In rare cases (e.g. when using allowSubstitutes = false), it's
possible that we simultaneously have a DerivationGoal *and* a
SubstitutionGoal building the same path. So if a DerivationGoal
already built the path while the SubstitutionGoal was waiting for a
download slot, it saves us a superfluous download to exit early.
In the "discard" case (i.e. when the store path already exists
locally), when we call parseDump() from a Finally and it throws an
exception (e.g. if the download of the NAR fails), Nix crashes:
terminate called after throwing an instance of 'nix::SubstituteGone'
what(): error: file 'nar/06br3254rx4gz4cvjzxlv028jrx80zg5i4jr62vjmn416dqihgr7.nar.xz' does not exist in binary cache 'http://localhost'
Aborted (core dumped)
Instead of having it be the default method in `Store` itself, have it be
the implementation in `DummyStore` and `LegacySSHStore`. Then just the
implementations which fail to provide the method pay the "penalty" of
dealing with the icky `unimplemented` function for non-compliance.
Picks up where #8217. Getting close to no `unsupported` in the `Store`
interface itself!
More progress on issue #5729.
It is good to propagate the underlying error so whether or not we use a
process to deal with path length issues is not observable.
Also, as these wrapper functions got more and more complex, the code
duplication got worse and worse. The new `bindConnectProcHelper`
function deduplicates them.
This is useful for determining quickly which substituters to query.
An alternative would be for users to invoke the narinfo cache db directly,
so why do we need this change?
- It is easier to use. I believe Nix itself should also use it.
- This way, the narinfo cache db remains an implementation detail.
- Callers get to use the in-memory cache as well.
This does not yet resolve the coupling between packages and
derivations, but it makes the code more consistent with the
terminology, and it accentuates places where the coupling is
obvious, such as
auto drvPath = packageInfo.queryDrvPath();
if (!drvPath)
throw Error("'%s' is not a derivation", what());
... which isn't wrong, and in my opinion, doesn't even look
wrong, because it just reflects the current logic.
However, I do like that we can now start to see in the code that
this coupling is perhaps a bit arbitrary.
After this rename, we can bring the DerivingPath concept into type
and start to lift this limitation.
these symbols are used a *lot*, so it makes sense to cache them. this
mostly increases clarity of the code (however clear one may wish to call
the parser desugaring here), but it also provides a small performance
benefit.
there's no reason the parser itself should be doing semantic analysis
like bindVars. split this bit apart (retaining the previous name in
EvalState) and have the parser really do *only* parsing, decoupled from
EvalState.
most EvalState and Expr members defined here could be elsewhere, where
they'd be easier to maintain (not being embedded in a file with arcane
syntax) and *somewhat* more faithfully placed according to the path of
the file they're defined in.
most instances of this being used do not refer to the "current"
position, sometimes not even to one reasonably close by. it could also
be called `makePos` instead, but `at` seems clear in context.
ParserState better describes what this struct really is. the parser
really does modify its state (most notably position and symbol tables),
so calling it that rather than obliquely "data" (which implies being
input only) makes sense.
since nix doesn't use the bison `error` terminal anywhere any invocation
of yyerror will immediately cause a failure. since we're *already*
leaking tons of memory whatever little bit bison allocates internally
doesn't much matter any more, and we'll be replacing the parser soon anyway.
coincidentally this now also matches the error behavior of URIs when
they are disabled or ~/ paths in pure eval mode, duplicate attr
detection etc.
The data was (accidentally?) copied into a std::string,
even though the string is immediately converted into a std::string_view.
The code has been changed to construct a std::string_view directly,
such that one copy less happens.
`FLOAT`, `INT`, and `IN` are identifers taken by macros.
The name `IN_KW` is chosen to match `OR_KW`, which is presumably named
that way for the same reason of dodging macros.
Most of this is a `catch SysError` -> `catch SystemError` sed. This
is a rather pure-churn change I would like to get out of the way. **The
intersting part is `src/libutil/error.hh`.**
On Unix, we will only throw the `SysError` concrete class, which has
the same constructors that `SystemError` used to have.
On Windows, we will throw `WinError` *and* `SysError`. `WinError`
(which will be created in a later PR), will use a `DWORD` instead of
`int` error value, and `GetLastError()`, which is the Windows equivalent
of the `errno` machinery. Windows will *also* use `SysError` because
Window's "libc" (MSVCRT) implements the POSIX interface, and we use it
too.
As the docs describe, while we *throw* one of the 3 choices above (2
concrete classes or the alias), we should always *catch* `SystemError`.
This ensures no matter how the implementation changes for Windows (e.g.
between `SysError` and `WinError`) the catching logic stays the same
and stays correct.
Co-Authored-By volth <volth@volth.com>
Co-Authored-By Eugene Butler <eugene@eugene4.com>
When returning a 0-length substring, avoid calling coerceToString,
since it returns a string_view with the string's length, which is
expensive to compute for large strings.
Also fingerprint and some preparatory improvements.
Testing is still not up to scratch because lots of logic is duplicated
between the workdir and commit cases.
