E.g.
$ nix-build '<nixpkgs>' -A hello --experimental-features no-url-literals
error: URL literals are disabled, at /nix/store/vsjamkzh15r3c779q2711az826hqgvzr-nixpkgs-20.03pre194957.bef773ed53f/nixpkgs/pkgs/top-level/all-packages.nix:1236:11
Helps with implementing https://github.com/NixOS/rfcs/pull/45.
A corrupt entry in .links prevents adding a fixed version of that file
to the store in any path. The user experience is that corruption
present in the store 'spreads' to new paths added to the store:
(With store optimisation enabled)
1. A file in the store gets corrupted somehow (eg: filesystem bug).
2. The user tries to add a thing to the store which contains a good copy
of the corrupted file.
3. The file being added to the store is hashed, found to match the bad
.links entry, and is replaced by a link to the bad .links entry.
(The .links entry's hash is not verified during add -- this would
impose a substantial performance burden.)
4. The user observes that the thing in the store that is supposed to be
a copy of what they were trying to add is not a correct copy -- some
files have different contents! Running "nix-store --verify
--check-contents --repair" does not fix the problem.
This change makes "nix-store --verify --check-contents --repair" fix
this problem. Bad .links entries are simply removed, allowing future
attempts to insert a good copy of the file to succeed.
This doesn't work anymore since `packages` was removed from the
`nixpkgs`-fork with flake support[1], now it's only possible to refer to
pkgs via `legacyPackages`.
[1] 49c9b71e4c
The store path is not enough. For example, when we build a dirty tree,
commit, and build the clean tree, a re-evaluation is necessary because
the flake may depend on the lastModified or revCount attributes.
Derivations that want to use recursion should now set
requiredSystemFeatures = [ "recursive-nix" ];
to make the daemon socket appear.
Also, Nix should be configured with "experimental-features =
recursive-nix".
This allows Nix builders to call Nix to build derivations, with some
limitations.
Example:
let nixpkgs = fetchTarball channel:nixos-18.03; in
with import <nixpkgs> {};
runCommand "foo"
{
buildInputs = [ nix jq ];
NIX_PATH = "nixpkgs=${nixpkgs}";
}
''
hello=$(nix-build -E '(import <nixpkgs> {}).hello.overrideDerivation (args: { name = "hello-3.5"; })')
$hello/bin/hello
mkdir -p $out/bin
ln -s $hello/bin/hello $out/bin/hello
nix path-info -r --json $hello | jq .
''
This derivation makes a recursive Nix call to build GNU Hello and
symlinks it from its $out, i.e.
# ll ./result/bin/
lrwxrwxrwx 1 root root 63 Jan 1 1970 hello -> /nix/store/s0awxrs71gickhaqdwxl506hzccb30y5-hello-3.5/bin/hello
# nix-store -qR ./result
/nix/store/hwwqshlmazzjzj7yhrkyjydxamvvkfd3-glibc-2.26-131
/nix/store/s0awxrs71gickhaqdwxl506hzccb30y5-hello-3.5
/nix/store/sgmvvyw8vhfqdqb619bxkcpfn9lvd8ss-foo
This is implemented as follows:
* Before running the outer builder, Nix creates a Unix domain socket
'.nix-socket' in the builder's temporary directory and sets
$NIX_REMOTE to point to it. It starts a thread to process
connections to this socket. (Thus you don't need to have nix-daemon
running.)
* The daemon thread uses a wrapper store (RestrictedStore) to keep
track of paths added through recursive Nix calls, to implement some
restrictions (see below), and to do some censorship (e.g. for
purity, queryPathInfo() won't return impure information such as
signatures and timestamps).
* After the build finishes, the output paths are scanned for
references to the paths added through recursive Nix calls (in
addition to the inputs closure). Thus, in the example above, $out
has a reference to $hello.
The main restriction on recursive Nix calls is that they cannot do
arbitrary substitutions. For example, doing
nix-store -r /nix/store/kmwd1hq55akdb9sc7l3finr175dajlby-hello-2.10
is forbidden unless /nix/store/kmwd... is in the inputs closure or
previously built by a recursive Nix call. This is to prevent
irreproducible derivations that have hidden dependencies on
substituters or the current store contents. Building a derivation is
fine, however, and Nix will use substitutes if available. In other
words, the builder has to present proof that it knows how to build a
desired store path from scratch by constructing a derivation graph for
that path.
Probably we should also disallow instantiating/building fixed-output
derivations (specifically, those that access the network, but
currently we have no way to mark fixed-output derivations that don't
access the network). Otherwise sandboxed derivations can bypass
sandbox restrictions and access the network.
When sandboxing is enabled, we make paths appear in the sandbox of the
builder by entering the mount namespace of the builder and
bind-mounting each path. This is tricky because we do a pivot_root()
in the builder to change the root directory of its mount namespace,
and thus the host /nix/store is not visible in the mount namespace of
the builder. To get around this, just before doing pivot_root(), we
branch a second mount namespace that shares its /nix/store mountpoint
with the parent.
Recursive Nix currently doesn't work on macOS in sandboxed mode
(because we can't change the sandbox policy of a running build) and in
non-root mode (because setns() barfs).
The intent of the code was that if the window size cannot be determined,
it would be treated as having the maximum possible size. Because of a
missing assignment, it was actually treated as having a width of 0.
The reason the width could not be determined was because it was obtained
from stdout, not stderr, even though the printing was done to stderr.
This commit addresses both issues.
Add missing docstring on InstallableCommand. Also, some of these were wrapped
when they're right next to a line longer than the unwrapped line, so we can just
unwrap them to save vertical space.
Fixes the following warning and the indicate potential issue:
src/libstore/worker-protocol.hh:66:1: warning: class 'Source' was previously declared as a struct; this is valid, but may result in linker errors
under the Microsoft C++ ABI [-Wmismatched-tags]
(cherry picked from commit 6e1bb04870b1b723282d32182af286646f13bf3c)
git show seems to print the entire tag message when being called on a tag
instead of a commit. git log instead always prints the correct timestamp
in my tests.
The error nix prints is: `error: stoull`.
This is an alternative to the IN_NIX_SHELL environment variable,
allowing the expression to adapt itself to nix-shell without
triggering those adaptations when used as a dependency of another
shell.
Closes#3147
This allows to have a repl-centric workflow to working on nixpkgs.
Usage:
:edit <package> - heuristic that find the package file path
:edit <path> - just open the editor on the file path
Once invoked, `nix repl` will open $EDITOR on that file path. Once the
editor exits, `nix repl` will automatically reload itself.
This adds a command 'nix make-content-addressable' that rewrites the
specified store paths into content-addressable paths. The advantage of
such paths is that 1) they can be imported without signatures; 2) they
can enable deduplication in cases where derivation changes do not
cause output changes (apart from store path hashes).
For example,
$ nix make-content-addressable -r nixpkgs.cowsay
rewrote '/nix/store/g1g31ah55xdia1jdqabv1imf6mcw0nb1-glibc-2.25-49' to '/nix/store/48jfj7bg78a8n4f2nhg269rgw1936vj4-glibc-2.25-49'
...
rewrote '/nix/store/qbi6rzpk0bxjw8lw6azn2mc7ynnn455q-cowsay-3.03+dfsg1-16' to '/nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16'
We can then copy the resulting closure to another store without
signatures:
$ nix copy --trusted-public-keys '' ---to ~/my-nix /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16
In order to support self-references in content-addressable paths,
these paths are hashed "modulo" self-references, meaning that
self-references are zeroed out during hashing. Somewhat annoyingly,
this means that the NAR hash stored in the Nix database is no longer
necessarily equal to the output of "nix hash-path"; for
content-addressable paths, you need to pass the --modulo flag:
$ nix path-info --json /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16 | jq -r .[].narHash
sha256:0ri611gdilz2c9rsibqhsipbfs9vwcqvs811a52i2bnkhv7w9mgw
$ nix hash-path --type sha256 --base32 /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16
1ggznh07khq0hz6id09pqws3a8q9pn03ya3c03nwck1kwq8rclzs
$ nix hash-path --type sha256 --base32 /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16 --modulo iq6g2x4q62xp7y7493bibx0qn5w7xz67
0ri611gdilz2c9rsibqhsipbfs9vwcqvs811a52i2bnkhv7w9mgw
Fixes
error: the content hash of flake '/home/eelco/Dev/nixpkgs-flake?ref=HEAD&rev=0000000000000000000000000000000000000000' doesn't match the hash recorded in the referring lockfile
Experimental features are now opt-in. There is currently one
experimental feature: "nix-command" (which enables the "nix"
command. This will allow us to merge experimental features more
quickly, without committing to supporting them indefinitely.
Typical usage:
$ nix build --experimental-features 'nix-command flakes' nixpkgs#hello
(cherry picked from commit 8e478c2341,
without the "flakes" feature)
Experimental features are now opt-in. There are currently two
experimental features: "nix-command" (which enables the "nix"
command), and "flakes" (which enables support for flakes). This will
allow us to merge experimental features more quickly, without
committing to supporting them indefinitely.
Typical usage:
$ nix build --experimental-features 'nix-command flakes' nixpkgs#hello
In particular, when building a flake lock file, inputs like 'nixpkgs'
are now downloaded only once. Previously, it would fetch
https://api.github.com/repos/<owner>/<repo>/tarball/<ref> and then
later https://api.github.com/repos/<owner>/<repo>/tarball/<rev>, even
though they produce the same result.
Git and GitHub now also share a cache that maps revs to a store path
and other info.
A command like
$ nix run nixpkgs#hello
will now build the attribute 'packages.${system}.hello' rather than
'packages.hello'. Note that this does mean that the flake needs to
export an attribute for every system type it supports, and you can't
build on unsupported systems. So 'packages' typically looks like this:
packages = nixpkgs.lib.genAttrs ["x86_64-linux" "i686-linux"] (system: {
hello = ...;
});
The 'checks', 'defaultPackage', 'devShell', 'apps' and 'defaultApp'
outputs similarly are now attrsets that map system types to
derivations/apps. 'nix flake check' checks that the derivations for
all platforms evaluate correctly, but only builds the derivations in
'checks.${system}'.
Fixes#2861. (That issue also talks about access to ~/.config/nixpkgs
and --arg, but I think it's reasonable to say that flakes shouldn't
support those.)
The alternative to attribute selection is to pass the system type as
an argument to the flake's 'outputs' function, e.g. 'outputs = { self,
nixpkgs, system }: ...'. However, that approach would be at odds with
hermetic evaluation and make it impossible to enumerate the packages
provided by a flake.
The tmpDirInSandbox is different when in sandboxed vs. non-sandboxed.
Since we don’t know ahead of time here whether sandboxing is enabled,
we need to reset all of the env vars we’ve set previously. This fixes
the issue encountered in https://github.com/NixOS/nixpkgs/issues/70856.
Previously, SANDBOX_SHELL was set to empty when unavailable. This
caused issues when actually generating the sandbox. Instead, just set
SANDBOX_SHELL when --with-sandbox-shell= is non-empty. Alternative
implementation to https://github.com/NixOS/nix/pull/3038.
Pure mode should not try to source the user’s bashrc file. These may
have many impurities that the user does not expect to get into their
shell.
Fixes#3090
Fixes
$ nix build
fatal: bad revision 'HEAD'
error: program 'git' failed with exit code 128
on a new flake. It is now detected as a dirty tree with revCount = 0.
When running nix doctor on a healthy system, it just prints the store URI and
nothing else. This makes it unclear whether the system is in a good state and
what check(s) it actually ran, since some of the checks are optional depending
on the store type.
This commit updates nix doctor to print an colored log message for every check
that it does, and explicitly state whether that check was a PASS or FAIL to make
it clear to the user whether the system passed its checkup with the doctor.
Fixes#3084
Only variables that were marked as exported are exported in the dev
shell. Also, we no longer try to parse the function section of the env
file, fixing
$ nix dev-shell
error: shell environment '/nix/store/h7ama3kahb8lypf4nvjx34z06g9ncw4h-nixops-1.7pre20190926.4c7acbb-env' has unexpected line '/^[a-z]?"""/ {'
For example, if the top-level flake depends on
"nixpkgs/release-19.03", and one of its dependencies depends on
"nixpkgs", then the latter will be mapped to "nixpkgs/release-19.03",
rather than whatever the default branch of "nixpkgs" is. Thus you get
only one "nixpkgs" dependency rather than two.
This currently only works in a breadth-first way, so the other way
around (i.e. if the top-level flake depends on "nixpkgs", and a
dependency depends on "nixpkgs/release-19.03") still results in two
"nixpkgs" dependencies.
If 'input.<name>.uri' changes, then the entry in the lockfile for
input <name> should be considered stale.
Also print some messages when lock file entries are added/updated.
This integrates the functionality of the index-debuginfo program in
nixos-channel-scripts to maintain an index of DWARF debuginfo files in
a format usable by dwarffs. Thus the debug info index is updated by
Hydra rather than by the channel mirroring script.
Example usage:
$ nix copy --to 'file:///tmp/binary-cache?index-debug-info=true' /nix/store/vr9mhcch3fljzzkjld3kvkggvpq38cva-nix-2.2.2-debug
$ cat /tmp/binary-cache/debuginfo/036b210b03bad75ab2d8fc80b7a146f98e7f1ecf.debug
{"archive":"../nar/0313h2kdhk4v73xna9ysiksp2v8xrsk5xsw79mmwr3rg7byb4ka8.nar.xz","member":"lib/debug/.build-id/03/6b210b03bad75ab2d8fc80b7a146f98e7f1ecf.debug"}
Fixes#3083.
So you now get
$ nix build
error: path '.' is not a flake (because it does not reference a Git repository)
rather than
$ nix build
error: unsupported argument '.'
Instead of a list, inputs are now an attrset like
inputs = {
nixpkgs.uri = github:NixOS/nixpkgs;
};
If 'uri' is omitted, than the flake is a lookup in the flake registry, e.g.
inputs = {
nixpkgs = {};
};
but in that case, you can also just omit the input altogether and
specify it as an argument to the 'outputs' function, as in
outputs = { self, nixpkgs }: ...
This also gets rid of 'nonFlakeInputs', which are now just a special
kind of input that have a 'flake = false' attribute, e.g.
inputs = {
someRepo = {
uri = github:example/repo;
flake = false;
};
};
Previously we allowed any length of name for Nix derivations. This is
bad because different file systems have different max lengths. To make
things predictable, I have picked a max. This was done by trying to
build this derivation:
derivation {
name = "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa";
builder = "/no-such-path";
system = "x86_64-linux";
}
Take off one a and it will not lead to file name too long. That ends
up being 212 a’s. An even smaller max could be picked if we want to
support more file systems.
Working backwards, this is why:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa-${name}.drv.chroot
> 255 - 32 - 1 - 4 - 7 = 211
These are already handled separately. This fixes warnings like
warning: ignoring the user-specified setting 'max-jobs', because it is a restricted setting and you are not a trusted user
when using the -j flag.
If a NAR is already in the store, addToStore doesn't read the source
which makes the protocol go out of sync. This happens for example when
two client try to nix-copy-closure the same derivation at the same time.
Introduce the SizeSource which allows to bound how much data is being
read from a source. It also contains a drainAll() function to discard
the rest of the source, useful to keep the nix protocol in sync.
With this patch, and this file I called `log.py`:
#!/usr/bin/env nix-shell
#!nix-shell -i python3 -p python3 --pure
import sys
from pprint import pprint
stack = []
timestack = []
for line in open(sys.argv[1]):
components = line.strip().split(" ", 2)
if components[0] != "function-trace":
continue
direction = components[1]
components = components[2].rsplit(" ", 2)
loc = components[0]
_at = components[1]
time = int(components[2])
if direction == "entered":
stack.append(loc)
timestack.append(time)
elif direction == "exited":
dur = time - timestack.pop()
vst = ";".join(stack)
print(f"{vst} {dur}")
stack.pop()
and:
nix-instantiate --trace-function-calls -vvvv ../nixpkgs/pkgs/top-level/release.nix -A unstable > log.matthewbauer 2>&1
./log.py ./log.matthewbauer > log.matthewbauer.folded
flamegraph.pl --title matthewbauer-post-pr log.matthewbauer.folded > log.matthewbauer.folded.svg
I can make flame graphs like: http://gsc.io/log.matthewbauer.folded.svg
---
Includes test cases around function call failures and tryEval. Uses
RAII so the finish is always called at the end of the function.
Make curl's low speed limit configurable via stalled-download-timeout.
Before, this limit was five minutes without receiving a single byte.
This is much too long as if the remote end may not have even
acknowledged the HTTP request.
POSIX file locks are essentially incompatible with multithreading. BSD
locks have much saner semantics. We need this now that there can be
multiple concurrent LocalStore::buildPaths() invocations.
This currently fails because we're using POSIX file locks. So when the
garbage collector opens and closes its own temproots file, it causes
the lock to be released and then deleted by another GC instance.
Passing `--post-build-hook /foo/bar` to a nix-* command will cause
`/foo/bar` to be executed after each build with the following
environment variables set:
DRV_PATH=/nix/store/drv-that-has-been-built.drv
OUT_PATHS=/nix/store/...build /nix/store/...build-bin /nix/store/...build-dev
This can be useful in particular to upload all the builded artifacts to
the cache (including the ones that don't appear in the runtime closure
of the final derivation or are built because of IFD).
This new feature prints the stderr/stdout output to the `nix-build`
and `nix build` client, and the output is printed in a Nix 2
compatible format:
[nix]$ ./inst/bin/nix-build ./test.nix
these derivations will be built:
/nix/store/ishzj9ni17xq4hgrjvlyjkfvm00b0ch9-my-example-derivation.drv
building '/nix/store/ishzj9ni17xq4hgrjvlyjkfvm00b0ch9-my-example-derivation.drv'...
hello!
bye!
running post-build-hook '/home/grahamc/projects/github.com/NixOS/nix/post-hook.sh'...
post-build-hook: + sleep 1
post-build-hook: + echo 'Signing paths' /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: Signing paths /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: + sleep 1
post-build-hook: + echo 'Uploading paths' /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: Uploading paths /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: + sleep 1
post-build-hook: + printf 'very important stuff'
/nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
[nix-shell:~/projects/github.com/NixOS/nix]$ ./inst/bin/nix build -L -f ./test.nix
my-example-derivation> hello!
my-example-derivation> bye!
my-example-derivation (post)> + sleep 1
my-example-derivation (post)> + echo 'Signing paths' /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> Signing paths /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> + sleep 1
my-example-derivation (post)> + echo 'Uploading paths' /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> Uploading paths /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> + sleep 1
my-example-derivation (post)> + printf 'very important stuff'
[1 built, 0.0 MiB DL]
Co-authored-by: Graham Christensen <graham@grahamc.com>
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
startProcess does not appear to send the exit code to the helper
correctly. Not sure why this is, but it is probably safe to just
fallback on all sandbox errors.
This ensures that stdenv / setup hooks take $IN_NIX_SHELL into
account. For example, stdenv only sets
NIX_SSL_CERT_FILE=/no-cert-file.crt if we're not in a shell.
When sandbox-fallback = true (the default), the Nix builder will fall
back to disabled sandbox mode when the kernel doesn’t allow users to
set it up. This prevents hard errors from occuring in tricky places,
especially the initial installer. To restore the previous behavior,
users can set:
sandbox-fallback = false
in their /etc/nix/nix.conf configuration.
Some kernels disable "unpriveleged user namespaces". This is
unfortunate, but we can still use mount namespaces. Anyway, since each
builder has its own nixbld user, we already have most of the benefits
of user namespaces.
This replaces 'nix-env --set'. For example:
$ nix build --profile /nix/var/nix/profiles/system \
~/Misc/eelco-configurations:nixosConfigurations.vyr.config.system.build.toplevel
updates the NixOS system profile from a flake.
This could have been a separate command (e.g. 'nix set-profile') but
1) '--profile' is pretty similar to '--out-link'; and 2) '--profile'
could be useful for other command (like 'nix dev-shell').
This is a much simpler fix to the 'error 9 while decompressing xz
file' problem than 78fa47a7f0. We just
do a ranged HTTP request starting after the data that we previously
wrote into the sink.
Fixes#2952, #379.
Our use of boost::coroutine2 depends on -lboost_context,
which in turn depends on `-lboost_thread`, which in turn depends
on `-lboost_system`.
I suspect that this builds on nix only because of low-level hacks
like NIX_LDFLAGS.
This commit passes the proper linker flags, thus fixing bootstrap
builds on non-nix distributions like Ubuntu 16.04.
With these changes, I can build Nix on Ubuntu 16.04 using:
./bootstrap.sh
./configure --prefix=$HOME/editline-prefix \
--disable-doc-gen \
CXX=g++-7 \
--with-boost=$HOME/boost-prefix \
EDITLINE_CFLAGS=-I$HOME/editline-prefix/include \
EDITLINE_LIBS=-leditline \
LDFLAGS=-L$HOME/editline-prefix/lib
make
where
* g++-7 comes from gcc-7 from
https://launchpad.net/~ubuntu-toolchain-r/+archive/ubuntu/test,
* editline 1.14 from https://github.com/troglobit/editline/releases/tag/1.14.0
was installed into `$HOME/editline-prefix`
(because Ubuntu 16.04's `editline` is too old to have the function nix uses),
* boost 1.66 from
https://www.boost.org/doc/libs/1_66_0/more/getting_started/unix-variants.html
was installed into $HOME/boost-prefix (because Ubuntu 16.04 only has 1.58)
$ sudo ./inst/bin/nix-instantiate -E '"${./.git}"'
error: The path name '.git' is invalid: it is illegal to start the
name with a period. Path names are alphanumeric and can include the
symbols +-._?= and must not begin with a period. Note: If '.git' is a
source file and you cannot rename it on disk,
builtins.path { name = ... } can be used to give it an alternative
name.
If multiple builds with fail with different errors it will be reflected
in the status code.
eg.
103 => timeout + hash mismatch
105 => timeout + check mismatch
106 => hash mismatch + check mismatch
107 => timeout + hash mismatch + check mismatch
Setting `http2 = false` in nix config (e.g. /etc/nix/nix.conf)
had no effect, and `nix-env -vvvvv -i hello` still downloaded .nar
packages using HTTP/2.
In `src/libstore/download.cc`, the `CURL_HTTP_VERSION_2TLS` option was
being explicitly set when `downloadSettings.enableHttp2` was `true`,
but, `CURL_HTTP_VERSION_1_1` option was not being explicitly set when
`downloadSettings.enableHttp2` was `false`.
This may be because `https://curl.haxx.se/libcurl/c/libcurl-env.html` states:
"You have to set this option if you want to use libcurl's HTTP/2 support."
but, also, in the changelog, states:
"DEFAULT
Since curl 7.62.0: CURL_HTTP_VERSION_2TLS
Before that: CURL_HTTP_VERSION_1_1"
So, the default setting for `libcurl` is HTTP/2 for version >= 7.62.0.
In this commit, option `CURLOPT_HTTP_VERSION` is explicitly set to
`CURL_HTTP_VERSION_1_1` when `downloadSettings.enableHttp2` nix config
setting is `false`.
This can be tested by running `nix-env -vvvvv -i hello | grep HTTP`
The default nsswitch.conf(5) file in most distros can handle many
different things including host name, user names, groups, etc. In Nix,
we want to limit the amount of impurities that come from these things.
As a result, we should only allow nss to be used for gethostbyname(3)
and getservent(3).
/cc @Ericson2314
'updateCV.notify_one()' does nothing if the update thread is not
waiting for updateCV (in particular this happens when it is sleeping
on quitCV). So also set a variable to ensure that the update isn't
lost.
--no-net causes tarballTtl to be set to the largest 32-bit integer,
which causes comparison like 'time + tarballTtl < other_time' to
fail on 32-bit systems. So cast them to 64-bit first.
https://hydra.nixos.org/build/95076624
(cherry picked from commit 29ccb2e969)
This flag
* Disables substituters.
* Sets the tarball-ttl to infinity (ensuring e.g. that the flake
registry and any downloaded flakes are considered current).
* Disables retrying downloads and sets the connection timeout to the
minimum. (So it doesn't completely disable downloads at the moment.)
(cherry picked from commit 8ea842260b)
Once we've started writing data to a Sink, we can't restart a download
request, because then we end up writing duplicate data to the
Sink. Therefore we shouldn't handle retries in Downloader but at a
higher level (in particular, in copyStorePath()).
Fixes#2952.
(cherry picked from commit a67cf5a358)
Also, make fetchGit and fetchMercurial update allowedPaths properly.
(Maybe the evaluator, rather than the caller of the evaluator, should
apply toRealPath(), but that's a bigger change.)
(cherry picked from commit 5c34d66538)
Once we've started writing data to a Sink, we can't restart a download
request, because then we end up writing duplicate data to the
Sink. Therefore we shouldn't handle retries in Downloader but at a
higher level (in particular, in copyStorePath()).
Fixes#2952.
--no-net causes tarballTtl to be set to the largest 32-bit integer,
which causes comparison like 'time + tarballTtl < other_time' to
fail on 32-bit systems. So cast them to 64-bit first.
https://hydra.nixos.org/build/95076624
This flag
* Disables substituters.
* Sets the tarball-ttl to infinity (ensuring e.g. that the flake
registry and any downloaded flakes are considered current).
* Disables retrying downloads and sets the connection timeout to the
minimum. (So it doesn't completely disable downloads at the moment.)
This allows many programs (e.g. gcc, clang, cmake) to print colorized
log output (assuming $TERM is set to a value like "xterm").
There are other ways to get colors, in particular setting
CLICOLOR_FORCE, but they're less widely supported and can break
programs that parse tool output.
In a daemon-based Nix setup, some options cannot be overridden by a
client unless the client's user is considered trusted.
Currently, if an untrusted user tries to override one of those
options, we are silently ignoring it.
This can be pretty confusing in certain situations.
e.g. a user thinks he disabled the sandbox when in reality he did not.
We are now sending a warning message letting know the user some options
have been ignored.
Related to #1761.
This exploits the hermetic nature of flake evaluation to speed up
repeated evaluations of a flake output attribute.
For example (doing 'nix build' on an already present package):
$ time nix build nixpkgs:firefox
real 0m1.497s
user 0m1.160s
sys 0m0.139s
$ time nix build nixpkgs:firefox
real 0m0.052s
user 0m0.038s
sys 0m0.007s
The cache is ~/.cache/nix/eval-cache-v1.sqlite, which has entries like
INSERT INTO Attributes VALUES(
X'92a907d4efe933af2a46959b082cdff176aa5bfeb47a98fabd234809a67ab195',
'packages.firefox',
1,
'/nix/store/pbalzf8x19hckr8cwdv62rd6g0lqgc38-firefox-67.0.drv /nix/store/g6q0gx0v6xvdnizp8lrcw7c4gdkzana0-firefox-67.0 out');
where the hash 92a9... is a fingerprint over the flake store path and
the contents of the lockfile. Because flakes are evaluated in pure
mode, this uniquely identifies the evaluation result.
For the SIGWINCH signal to be caught, it needs to be set in sigaction
on the main thread. Previously, this was broken, and updateWindowSize
was never being called. Tested on macOS 10.14.
As long as the flake input is locked, it is now only fetched when it
is evaluated (e.g. "nixpkgs" is fetched when
"inputs.nixpkgs.<something>" is evaluated).
This required adding an "id" attribute to the members of "inputs" in
lockfiles, e.g.
"inputs": {
"nixpkgs/release-19.03": {
"id": "nixpkgs",
"inputs": {},
"narHash": "sha256-eYtxncIMFVmOHaHBtTdPGcs/AnJqKqA6tHCm0UmPYQU=",
"nonFlakeInputs": {},
"uri": "github:edolstra/nixpkgs/e9d5882bb861dc48f8d46960e7c820efdbe8f9c1"
}
}
because the flake ID needs to be known beforehand to construct the
"inputs" attrset.
Fixes#2913.
This is like 'nix run', except that the command to execute is defined
in a flake output, e.g.
defaultApp = {
type = "app";
program = "${packages.blender_2_80}/bin/blender";
};
Thus you can do
$ nix app blender-bin
to start Blender from the 'blender-bin' flake.
In the future, we can extend this with sandboxing. (For example we
would want to be able to specify that Blender should not have network
access by default and should only have access to certain paths in the
user's home directory.)
This is primarily useful for version string generation, where we need
a monotonically increasing number. The revcount is the preferred thing
to use, but isn't available for GitHub flakes (since it requires
fetching the entire history). The last commit timestamp OTOH can be
extracted from GitHub tarballs.
This ensures that flakes don't get garbage-collected, which is
important to get nix-channel-like behaviour.
For example, running
$ nix build hydra:
will create a GC root
~/.cache/nix/flake-closures/hydra -> /nix/store/xarfiqcwa4w8r4qpz1a769xxs8c3phgn-flake-closure
where the contents/references of the linked file in the store are the
flake source trees used by the 'hydra' flake:
/nix/store/n6d5f5lkpfjbmkyby0nlg8y1wbkmbc7i-source
/nix/store/vbkg4zy1qd29fnhflsv9k2j9jnbqd5m2-source
/nix/store/z46xni7d47s5wk694359mq9ay353ar94-source
Note that this in itself is not enough to allow offline use; the
fetcher for the flakeref (e.g. fetchGit or downloadCached) must not
fail if it cannot fetch the latest version of the file, so long as it
knows a cached version.
Issue #2868.
This causes 'nix' to print build log output to stderr rather than
showing the last log line in the progress bar. Log lines are prefixed
by the name of the derivation (minus the version string), e.g.
binutils> make[1]: Leaving directory '/build/binutils-2.31.1'
binutils-wrapper> unpacking sources
binutils-wrapper> patching sources
...
binutils-wrapper> Using dynamic linker: '/nix/store/kr51dlsj9v5cr4n8700jliyz8v5b2q7q-bootstrap-stage0-glibc/lib/ld-linux-x86-64.so.2'
bootstrap-stage2-gcc-wrapper> unpacking sources
...
linux-headers> unpacking sources
linux-headers> unpacking source archive /nix/store/8javli69jhj3bkql2c35gsj5vl91p382-linux-4.19.16.tar.xz
It was getting confused between logical and real store paths.
Also, make fetchGit and fetchMercurial update allowedPaths properly.
(Maybe the evaluator, rather than the caller of the evaluator, should
apply toRealPath(), but that's a bigger change.)
The value of useChroot is not set yet in the constructor, resulting in
hash rewriting being enabled in certain cases where it should not be.
Fixes#2801
Sometimes, "expected" can be "0", but in fact means "unknown".
This is for example the case when downloading a file while the http
server doesn't send the `Content-Length` header, like when running `nix
build` pointing to a nixpkgs checkout streamed from GitHub:
⇒ nix build -f https://github.com/NixOS/nixpkgs/archive/master.tar.gz hello
[1.8/0.0 MiB DL] downloading 'https://github.com/NixOS/nixpkgs/archive/master.tar.gz'
In that case, don't show that weird progress bar, but only the (slowly
increasing) downloaded size ("done").
⇒ nix build -f https://github.com/NixOS/nixpkgs/archive/master.tar.gz hello
[1.8 MiB DL] downloading 'https://github.com/NixOS/nixpkgs/archive/master.tar.gz'
This commit also updates fmt calls with three numbers (when something is
currently 'running' too) - I'm not sure if this can be provoked, but
showing "0" as expected doesn't make any sense, as we're obviously doing
more than nothing.
For text files it is possible to do it like so:
`builtins.hashString "sha256" (builtins.readFile /tmp/a)`
but that doesn't work for binary files.
With builtins.hashFile any kind of file can be conveniently hashed.
To determine which seccomp filters to install, we were incorrectly
using settings.thisSystem, which doesn't denote the actual system when
--system is used.
Fixes#2791.
Thus
$ nix dev-shell
will now build the 'provides.devShell' attribute from the flake in the
current directory. If it doesn't exist, it falls back to
'provides.defaultPackage'.
'nix dev-shell' is intended to replace nix-shell. It supports flakes,
e.g.
$ nix dev-shell nixpkgs:hello
starts a bash shell providing an environment for building 'hello'.
Like Lorri (and unlike nix-shell), it computes the build environment
by building a modified top-level derivation that writes the
environment after running $stdenv/setup to $out and exits. This
provides some caching, so it's faster than nix-shell in some cases
(especially for packages with lots of dependencies, where the setup
script takes a long time).
There also is a command 'nix print-dev-env' that prints out shell code
for setting up the build environment in an existing shell, e.g.
$ . <(nix print-dev-env nixpkgs:hello)
https://github.com/tweag/nix/issues/21
Example:
$ nix flake info dwarffs
ID: dwarffs
URI: github:edolstra/dwarffs/a83d182fe3fe528ed6366a5cec3458bcb1a5f6e1
Description: A filesystem that fetches DWARF debug info from the Internet on demand
Revision: a83d182fe3fe528ed6366a5cec3458bcb1a5f6e1
Path: /nix/store/grgd14kxxk8q4n503j87mpz48gcqpqw7-source
This ensures that the lock file is updated *before* evaluating it, and
that it gets updated for any nix command, not just 'nix build'.
Also, while computing the lock file, allow arbitrary registry lookups,
not just at top-level.
Also, improve some error messages slightly.
Also allow "." as an installable to refer to the flake in the current
directory. E.g.
$ nix build .
will build 'provides.defaultPackage' in the flake in the current
directory.
Unlike file://<path>, this allows the path to be a dirty Git tree, so
nix build /path/to/flake:attr
is a convenient way to test building a local flake.
The general syntax for an installable is now
<flakeref>:<attrpath>. The attrpath is relative to the flake's
'provides.packages' or 'provides' if the former doesn't yield a
result. E.g.
$ nix build nixpkgs:hello
is equivalent to
$ nix build nixpkgs:packages.hello
Also, '<flakeref>:' can be omitted, in which case it defaults to
'nixpkgs', e.g.
$ nix build hello
Scanning of /proc/<pid>/{exe,cwd} was broken because '{memory:' was
prepended twice. Also, get rid of the whole '{memory:...}' thing
because it's unnecessary, we can just list the file in /proc directly.
This new structure makes more sense as there may be many sources rooting
the same store path. Many profiles can reference the same path but this
is even more true with /proc/<pid>/maps where distinct pids can and
often do map the same store path.
This implementation is also more efficient as the `Roots` map contains
only one entry per rooted store path.
It could happen that the local builder match the system but lacks some features.
Now it results a failure.
The fix gracefully excludes the local builder from the set of available builders for derivation which requires the feature, so the derivation is built on remote builders only (as though it has incompatible system, like ```aarch64-linux``` when local is x86)
This allows using an arbitrary "provides" attribute from the specified
flake. For example:
nix build --flake nixpkgs packages.hello
(Maybe provides.packages should be used for consistency...)
We want to encourage a brave new world of hermetic evaluation for
source-level reproducibility, so flakes should not poke around in the
filesystem outside of their explicit dependencies.
Note that the default installation source remains impure in that it
can refer to mutable flakes, so "nix build nixpkgs.hello" still works
(and fetches the latest nixpkgs, unless it has been pinned by the
user).
A problem with pure evaluation is that builtins.currentSystem is
unavailable. For the moment, I've hard-coded "x86_64-linux" in the
nixpkgs flake. Eventually, "system" should be a flake function
argument.
For example, github:edolstra/dwarffs is more-or-less equivalent to
https://github.com/edolstra/dwarffs.git. It's a much faster way to get
GitHub repositories: it fetches tarballs rather than entire Git
repositories. It also allows fetching specific revisions by hash
without specifying a ref (e.g. a branch name):
github:edolstra/dwarffs/41c0c1bf292ea3ac3858ff393b49ca1123dbd553
This reverts commit a0ef21262f. This
doesn't work in 'nix run' and nix-shell because setns() fails in
multithreaded programs, and Boehm GC mark threads are uncancellable.
Fixes#2646.
Inside a derivation, exportReferencesGraph already provides a way to
dump the Nix database for a specific closure. On the command line,
--dump-db gave us the same information, but only for the entire Nix
database at once.
With this change, one can now pass a list of paths to --dump-db to get
the Nix database dumped for just those paths. (The user is responsible
for ensuring this is a closure, like for --export).
Among other things, this is useful for deploying a closure to a new
host without using --import/--export; one can use tar to transfer the
store paths, and --dump-db/--load-db to transfer the validity
information. This is useful if the new host doesn't actually have Nix
yet, and the closure that is being deployed itself contains Nix.
Previously, plain derivation paths in the string context (e.g. those
that arose from builtins.storePath on a drv file, not those that arose
from accessing .drvPath of a derivation) were treated somewhat like
derivaiton paths derived from .drvPath, except their dependencies
weren't recursively added to the input set. With this change, such
plain derivation paths are simply treated as paths and added to the
source inputs set accordingly, simplifying context handling code and
removing the inconsistency. If drvPath-like behavior is desired, the
.drv file can be imported and then .drvPath can be accessed.
This is a backwards-incompatibility, but storePath is never used on
drv files within nixpkgs and almost never used elsewhere.
Trying to fetch refs that are not in refs/heads currently fails because
it looks for refs/heads/refs/foo instead of refs/foo.
eg.
builtins.fetchGit {
url = https://github.com/NixOS/nixpkgs.git;
ref = "refs/pull/1024/head;
}
SRI hashes (https://www.w3.org/TR/SRI/) combine the hash algorithm and
a base-64 hash. This allows more concise and standard hash
specifications. For example, instead of
import <nix/fetchurl.nl> {
url = https://nixos.org/releases/nix/nix-2.1.3/nix-2.1.3.tar.xz;
sha256 = "5d22dad058d5c800d65a115f919da22938c50dd6ba98c5e3a183172d149840a4";
};
you can write
import <nix/fetchurl.nl> {
url = https://nixos.org/releases/nix/nix-2.1.3/nix-2.1.3.tar.xz;
hash = "sha256-XSLa0FjVyADWWhFfkZ2iKTjFDda6mMXjoYMXLRSYQKQ=";
};
In fixed-output derivations, the outputHashAlgo is no longer mandatory
if outputHash specifies the hash (either as an SRI or in the old
"<type>:<hash>" format).
'nix hash-{file,path}' now print hashes in SRI format by default. I
also reverted them to use SHA-256 by default because that's what we're
using most of the time in Nixpkgs.
Suggested by @zimbatm.
Use the same output ordering and format everywhere.
This is such a common issue that we trade the single-line error message for
more readability.
Old message:
```
fixed-output derivation produced path '/nix/store/d4nw9x2sy9q3r32f3g5l5h1k833c01vq-example.com' with sha256 hash '08y4734bm2zahw75b16bcmcg587vvyvh0n11gwiyir70divwp1rm' instead of the expected hash '1xzwnipjd54wl8g93vpw6hxnpmdabq0wqywriiwmh7x8k0lvpq5m'
```
New message:
```
hash mismatch in fixed-output derivation '/nix/store/d4nw9x2sy9q3r32f3g5l5h1k833c01vq-example.com':
wanted: sha256:1xzwnipjd54wl8g93vpw6hxnpmdabq0wqywriiwmh7x8k0lvpq5m
got: sha256:08y4734bm2zahw75b16bcmcg587vvyvh0n11gwiyir70divwp1rm
```
Without this information the content addressable state and hashes are
lost after the first request, this causes signatures to be required for
everything even tho the path could be verified without signing.
This enables using for http for S3 request for debugging or
implementations that don't have https configured. This is not a problem
for binary caches since they should not contain sensitive information.
Both package signatures and AWS auth already protect against tampering.
The goal is to support libeditline AND libreadline and let the user
decide at compile time which one to use.
Add a compile time option to use libreadline instead of
libeditline. If compiled against libreadline completion functionality
is lost because of a incompatibility between libeditlines and
libreadlines completion function. Completion with libreadline is
possible and can be added later.
To use libreadline instead of libeditline the environment
variables 'EDITLINE_LIBS' and 'EDITLINE_CFLAGS' have to been set
during the ./configure step.
Example:
EDITLINE_LIBS="/usr/lib/x86_64-linux-gnu/libhistory.so /usr/lib/x86_64-linux-gnu/libreadline.so"
EDITLINE_CFLAGS="-DREADLINE"
The reason for this change is that for example on Debian already three
different editline libraries exist but none of those is compatible the
flavor used by nix. My hope is that with this change it would be
easier to port nix to systems that have already libreadline available.
Previously, config would only be read from XDG_CONFIG_HOME. This change
allows reading config from additional directories, which enables e.g.
per-project binary caches or chroot stores with the help of direnv.
The use of TransferManager has several issues, including that it
doesn't allow setting a Content-Encoding without a patch, and it
doesn't handle exceptions in worker threads (causing termination on
memory allocation failure).
Fixes#2493.
This commit partially reverts 48662d151b. When
copying from an older store (in my case a store running Nix 1.11.7), nix would
throw errors about there being no hash. This is fixed by recalculating the hash.
In structured-attributes derivations, you can now specify per-output
checks such as:
outputChecks."out" = {
# The closure of 'out' must not be larger than 256 MiB.
maxClosureSize = 256 * 1024 * 1024;
# It must not refer to C compiler or to the 'dev' output.
disallowedRequisites = [ stdenv.cc "dev" ];
};
outputChecks."dev" = {
# The 'dev' output must not be larger than 128 KiB.
maxSize = 128 * 1024;
};
Also fixed a bug in allowedRequisites that caused it to ignore
self-references.
This prints the references graph of the store paths in the graphML
format [1]. The graphML format is supported by several graph tools
such as the Python Networkx library or the Apache Thinkerpop project.
[1] http://graphml.graphdrawing.org
Since its superclass RemoteStore::Connection contains 'to' and 'from'
fields that refer to the file descriptor maintained in the subclass,
it was possible for the flush() call in Connection::~Connection() to
write to a closed file descriptor (or worse, a file descriptor now
referencing another file). So make sure that the file descriptor
survives 'to' and 'from'.
This is primarily because Derivation::{can,will}BuildLocally() depends
on attributes like preferLocalBuild and requiredSystemFeatures, but it
can't handle them properly because it doesn't have access to the
structured attributes.
E.g. __noChroot and allowedReferences now work correctly. We also now
check that the attribute type is correct. For instance, instead of
allowedReferences = "out";
you have to write
allowedReferences = [ "out" ];
Fixes#2453.
This meant that making a typo in an s3:// URI would cause a bucket to
be created. Also it didn't handle eventual consistency very well. Now
it's up to the user to create the bucket.
Tools which re-exec `$SHELL` or `$0` or `basename $SHELL` or even just
`bash` will otherwise get the non-interactive bash, providing a
broken shell for the same reasons described in
https://github.com/NixOS/nixpkgs/issues/27493.
Extends c94f3d5575
Calculating roots seems significantly slower on darwin compared to
linux. Checking for /profile/ links could show some false positives but
should still catch most issues.
* Don't wait forever for the client to remove data from the
buffer. This does mean that the buffer can grow without bounds
(e.g. when downloading is faster than writing to disk), but meh.
* Don't hold the state lock while calling the sink. The sink could
take any amount of time to process the data (in particular when it's
actually a coroutine), so we don't want to block the download
thread.
In particular this causes copyStorePath() from HttpBinaryCacheStore to
only start a download if needed. E.g. if the destination LocalStore
goes to sleep waiting for the path lock and another process creates
the path, then LocalStore::addToStore() will never read from the
source so we don't have to do the download.
‘geteuid’ gives us the user that the command is being run as,
including in setuid modes. By using geteuid to determind id, we can
avoid the ‘sudo -i’ hack when upgrading Nix. So now, upgrading Nix on
macOS is as simple as:
$ sudo nix-channel --update
$ sudo nix-env -u
$ sudo launchctl stop org.nixos.nix-daemon
$ sudo launchctl start org.nixos.nix-daemon
or
$ sudo systemctl restart nix-daemon
It's pretty easy to unintentionally install a second version of nix
into the user profile when using a daemon install. In this case it
looks like nix was upgraded while the nix-daemon is probably still
unning an older version.
A protocol mismatch can sometimes cause problems when using specific
features with an older daemon. For example:
Nix 2.0 changed the way files are compied to the store. The daemon is
backwards compatible and can still handle older clients, however a 1.11
nix-daemon isn't forwards compatible.
This is already done by coerceToString(), provided that the argument
is a path (e.g. 'fetchGit ./bla'). It fixes the handling of URLs like
git@github.com:owner/repo.git. It breaks 'fetchGit "./bla"', but that
was never intended to work anyway and is inconsistent with other
builtin functions (e.g. 'readFile "./bla"' fails).
E.g.
$ nix upgrade-nix
error: directory '/home/eelco/Dev/nix/inst/bin' does not appear to be part of a Nix profile
instead of
$ nix upgrade-nix
error: '/home/eelco/Dev/nix/inst' is not a symlink
Fix a 32-bit overflow that resulted in negative numbers being printed;
use fmt() instead of boost::format(); change -H to -h for consistency
with 'ls' and 'du'; make the columns narrower (since they can't be
bigger than 1024.0).
If the user has an object greater than 1024 yottabytes, it'll just display it as
N yottabytes instead of overflowing.
Swaps to use boost::format strings instead of std::setw and std::setprecision.
Using a 64bit integer on 32bit systems will come with a bit of a
performance overhead, but given that Nix doesn't use a lot of integers
compared to other types, I think the overhead is negligible also
considering that 32bit systems are in decline.
The biggest advantage however is that when we use a consistent integer
size across all platforms it's less likely that we miss things that we
break due to that. One example would be:
https://github.com/NixOS/nixpkgs/pull/44233
On Hydra it will evaluate, because the evaluator runs on a 64bit
machine, but when evaluating the same on a 32bit machine it will fail,
so using 64bit integers should make that consistent.
While the change of the type in value.hh is rather easy to do, we have a
few more options available for doing the conversion in the lexer:
* Via an #ifdef on the architecture and using strtol() or strtoll()
accordingly depending on which architecture we are. For the #ifdef
we would need another AX_COMPILE_CHECK_SIZEOF in configure.ac.
* Using istringstream, which would involve copying the value.
* As we're already using boost, lexical_cast might be a good idea.
Spoiler: I went for the latter, first of all because lexical_cast does
have an overload for const char* and second of all, because it doesn't
involve copying around the input string. Also, because istringstream
seems to come with a bigger overhead than boost::lexical_cast:
https://www.boost.org/doc/libs/release/doc/html/boost_lexical_cast/performance.html
The first method (still using strtol/strtoll) also wasn't something I
pursued further, because it is also locale-aware which I doubt is what
we want, given that the regex for int is [0-9]+.
Signed-off-by: aszlig <aszlig@nix.build>
Fixes: #2339
The profile present in PATH is not necessarily the actual profile
location. User profiles are generally added as $HOME/.nix-profile
in which case the indirect profile link needs to be resolved first.
/home/user/.nix-profile -> /nix/var/nix/profiles/per-user/user/profile
/nix/var/nix/profiles/per-user/user/profile -> profile-15-link
/nix/var/nix/profiles/per-user/user/profile-14-link -> /nix/store/hyi4kkjh3bwi2z3wfljrkfymz9904h62-user-environment
/nix/var/nix/profiles/per-user/user/profile-15-link -> /nix/store/6njpl3qvihz46vj911pwx7hfcvwhifl9-user-environment
To upgrade nix here we want /nix/var/nix/profiles/per-user/user/profile-16-link
instead of /home/user/.nix-profile-1-link. The latter is not a gcroot
and would be garbage collected, resulting in a broken profile.
Fixes#2175
The current usage technically works by putting multiple different
repos in to the same git directory. However, it is very slow as
Git tries very hard to find common commits between the two
repositories. If the two repositories are large (like Nixpkgs and
another long-running project,) it is maddeningly slow.
This change busts the cache for existing deployments, but users
will be promptly repaid in per-repository performance.
TransferManager allocates a lot of memory (50 MiB by default), and it
might leak but I'm not sure about that. In any case it was causing
OOMs in hydra-queue-runner. So allocate only one TransferManager per
S3BinaryCacheStore.
Hopefully fixes https://github.com/NixOS/hydra/issues/586.
This callback is executed on a different thread, so exceptions thrown
from the callback are not caught:
Aug 08 16:25:48 chef hydra-queue-runner[11967]: terminate called after throwing an instance of 'nix::Error'
Aug 08 16:25:48 chef hydra-queue-runner[11967]: what(): AWS error: failed to upload 's3://nix-cache/19dbddlfb0vp68g68y19p9fswrgl0bg7.ls'
Therefore, just check the transfer status after it completes. Also
include the S3 error message in the exception.
This didn't work anymore since decompression was only done in the
non-coroutine case.
Decompressors are now sinks, just like compressors.
Also fixed a bug in bzip2 API handling (we have to handle BZ_RUN_OK
rather than BZ_OK), which we didn't notice because there was a missing
'throw':
if (ret != BZ_OK)
CompressionError("error while compressing bzip2 file");
It adds a new operation, cmdAddToStoreNar, that does the same thing as
the corresponding nix-daemon operation, i.e. call addToStore(). This
replaces cmdImportPaths, which has the major issue that it sends the
NAR first and the store path second, thus requiring us to store the
incoming NAR either in memory or on disk until we decide what to do
with it.
For example, this reduces the memory usage of
$ nix copy --to 'ssh://localhost?remote-store=/tmp/nix' /nix/store/95cwv4q54dc6giaqv6q6p4r02ia2km35-blender-2.79
from 267 MiB to 12 MiB.
Probably fixes#1988.
In EvalState::checkSourcePath, the path is checked against the list of
allowed paths first and later it's checked again *after* resolving
symlinks.
The resolving of the symlinks is done via canonPath, which also strips
out "../" and "./". However after the canonicalisation the error message
pointing out that the path is not allowed prints the symlink target in
the error message.
Even if we'd suppress the message, symlink targets could still be leaked
if the symlink target doesn't exist (in this case the error is thrown in
canonPath).
So instead, we now do canonPath() without symlink resolving first before
even checking against the list of allowed paths and then later do the
symlink resolving and checking the allowed paths again.
The first call to canonPath() should get rid of all the "../" and "./",
so in theory the only way to leak a symlink if the attacker is able to
put a symlink in one of the paths allowed by restricted evaluation mode.
For the latter I don't think this is part of the threat model, because
if the attacker can write to that path, the attack vector is even
larger.
Signed-off-by: aszlig <aszlig@nix.build>
This particular `shell` variable wasn't used, since a new one was
declared in the only side of the `if` branch that used a `shell`
variable.
It could realistically confuse developers thinking it could use `$SHELL`
under some situations.
forceValue() were called after a value is copied effectively forcing only one of the copies keeping another copy not evaluated.
This resulted in its evaluation of the same lazy value more than once (the number of hits is not big though)
Not ready for this yet, causes the prompt to disappear in nix repl
and more generally can overwrite non-progress-bar messages.
This reverts commit 44de71a396.
Before:
$ command time nix-prefetch-url https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.17.6.tar.xz
1.19user 1.02system 0:41.96elapsed 5%CPU (0avgtext+0avgdata 182720maxresident)k
After:
1.38user 1.05system 0:39.73elapsed 6%CPU (0avgtext+0avgdata 16204maxresident)k
Note however that addToStore() can still take a lot of memory
(e.g. RemoteStore::addToStore() is constant space, but
LocalStore::addToStore() isn't; that's fixed by
c94b4fc7ee
though).
Fixes#1400.
For example, this allows you to do run nix-daemon as a non-privileged
user:
eelco$ NIX_STATE_DIR=~/my-nix/nix/var nix-daemon --store ~/my-nix/
The NIX_STATE_DIR is still needed because settings.nixDaemonSocketFile
is not derived from settings.storeUri (and we can't derive it from the
store's state directory because we don't want to open the store in the
parent process).
As proposed in #1634 the `nix search` command could use some
improvements. Initially 0413aeb35d added
some basic sorting behavior using `std::map`, a next step would be an
improvement of the output.
This patch includes the following changes:
* Use `$PAGER` for outputs with `RunPager` from `shared.hh`:
The same behavior is defined for `nix-env --query`, furthermore it
makes searching huge results way easier.
* Simplified result blocks:
The new output is heavily inspired by the output from `nox`, the first
line shows the attribute path and the derivaiton name
(`attribute path (derivation name)`) and the description in the second
line.
Slightly nicer behavior when updates are somewhat far apart
(during a long linking step, perhaps) ensuring things
don't appear unresponsive.
If we wait the maximum amount for the update,
don't bother waiting another 50ms (for rate-limiting purposes)
and just check if we should quit.
This also ensures we'll notice the request to quit within 1s
if quit is signalled but there is not an udpate.
(I'm not sure if this happens or not)
I hate to make this such a large check but the lack of documentation means we really have no idea what's allowed. All of them reported so far have been within ".app/Contents" directories. That appears to be a safe starting point. However, I would not be surprised to also find more paths that are disallowed for instance in .framework or .bundle directories.
Fixes#2031Fixes#2229
This makes 'nix copy' and 'nix path-info' work on .drv store
paths. Removing special treatment of .drv files seems the most
future-proof approach given the possible removal of .drv files in the
future.
Note that 'nix build' will still build (rather than substitute) .drv
paths due to the unfortunate overloading in Store::buildPaths().
EvalState contains a few counters (e.g. nrValues) that increase
quickly enough that they end up being interpreted as pointers by the
garbage collector. Moving it to the heap makes them invisible to the
garbage collector.
This reduces the max RSS doing 100 evaluations of
nixos.tests.firefox.x86_64-linux.drvPath from 455 MiB to 292 MiB.
Note: ideally, allocations would be much further up in the 64-bit
address space to reduce the odds of an integer being misinterpreted as
a pointer. Maybe we can use some linker magic to move the .bss segment
to a higher address.
This reduces the risk of object liveness misdetection. For example,
Glibc has an internal variable "mp_" that often points to a Boehm
object, keeping it alive unnecessarily. Since we don't store any
actual roots in global variables, we can just disable data segment
scanning.
With this, the max RSS doing 100 evaluations of
nixos.tests.firefox.x86_64-linux.drvPath went from 718 MiB to 455 MiB.
If a process disappears between the time /proc/[pid]/maps is opened and
the time it is read, the read() syscall will return ESRCH. This should be ignored.
In some versions/configurations libcurl doesn't handle timeouts
(especially DNS timeouts) in a way that wakes curl_multi_wait.
This doesn't appear to be a problem if using c-ares, FWIW.
This reduces memory consumption of
nix copy --from file://... --to ~/my-nix /nix/store/95cwv4q54dc6giaqv6q6p4r02ia2km35-blender-2.79
from 514 MiB to 18 MiB for an uncompressed binary cache, and from 192
MiB to 53 MiB for a bzipped binary cache. It may also be faster
because fetching can happen concurrently with decompression/writing.
Continuation of 48662d151b.
Issue https://github.com/NixOS/nix/issues/1681.
Allow global config settings to be defined in multiple Config
classes. For example, this means that libutil can have settings and
evaluator settings can be moved out of libstore. The Config classes
are registered in a new GlobalConfig class to which config files
etc. are applied.
Relevant to https://github.com/NixOS/nix/issues/2009 in that it
removes the need for ad hoc handling of useCaseHack, which was the
underlying cause of that issue.
Continuation of 97002b684c. This makes
the daemon use constant memory. For example, it reduces the daemon's
maximum RSS on
$ nix copy --from ~/my-nix --to daemon /nix/store/1n7x0yv8vq6zi90hfmian84vdhd04bgp-blender-2.79a
from 264 MiB to 7 MiB.
We now use a TunnelSource to prevent the connection from ending up in
an undefined state if an exception is thrown while the NAR is being
sent.
Issue https://github.com/NixOS/nix/issues/1681.
If the Env denotes a 'with', then values[0] may be an Expr* cast to a
Value*. For code that generically traverses Values/Envs, it's useful
to know this.
E.g. this makes
nix eval --restrict-eval -I /nix/store/foo '(builtins.readFile "/nix/store/foo/symlink/bla")'
(where /nix/store/foo/symlink is a symlink to another path in the
closure of /nix/store/foo) succeed.
This fixes a regression in Hydra compared to Nix 1.x (where there were
no restrictions at all on access to the Nix store).
The existing ordering linked `libutil` before `libstore`, which causes
link failures when building statically. This is due to `libstore` using
functions from `libutil`, and the fact that symbol resolution works
"forward" - i.e. if you pass `-lfoo -lbar -lbaz`, any symbols that
`libbar` uses from `libbaz` will be resolved, but symbols from `libfoo`
will not since it comes first in the command line.
All this to say: this commit reorders the libraries which fixes the link
errors.
Don't bind-mount these to themselves,
mount them into the chroot directory.
Fixes pty issues when using sandbox on CentOS 7.4.
(build of perlPackages.IOTty fails before this change)
The common use case is to search for packages containing multiple words
like a "git" "frontend". Having only one expressions makes this simple regular
use case very complicated. Instead, search accepts multiple regular epressions
which all need to match.
nix search git 'gui|frontend'
returns a list of all git uis for example
Fixes
error: getting status of '/nix/store/j8p0vv89k1pf0cn7kmfsdcs7bshwga1i-firefox-52.7.2esr/share/icons/hicolor/48x48/apps/firefox.png': No such file or directory
https://github.com/NixOS/nix/issues/1934
Also improve error message on directory/non-directory collisions.
For instance, this reduced the memory consumption of
$ nix copy --from ssh://localhost --to ~/my-nix /nix/store/1n7x0yv8vq6zi90hfmian84vdhd04bgp-blender-2.79a
from 632 MiB to 16 MiB.
From exec(3):
> The list of arguments must be terminated by a null pointer, and, since these
> are variadic functions, this pointer must be cast (char *) NULL
E.g.
cannot build on 'ssh://mac1': cannot connect to 'mac1': bash: nix-store: command not found
cannot build on 'ssh://mac2': cannot connect to 'mac2': Host key verification failed.
cannot build on 'ssh://mac3': cannot connect to 'mac3': Received disconnect from 213... port 6001:2: Too many authentication failures
Authentication failed.
copyStorePath() now pipes the output of srcStore->narFromPath()
directly into dstStore->addToStore(). The sink used by the former is
converted into a source usable by the latter using
boost::coroutine2. This is based on [1].
This reduces the maximum resident size of
$ nix build --store ~/my-nix/ /nix/store/b0zlxla7dmy1iwc3g459rjznx59797xy-binutils-2.28.1 --substituters file:///tmp/binary-cache-xz/ --no-require-sigs
from 418592 KiB to 53416 KiB. (The previous commit also reduced the
runtime from ~4.2s to ~3.4s, not sure why.) A further improvement will
be to download files into a Sink.
[1] https://github.com/NixOS/nix/compare/master...Mathnerd314:dump-fix-coroutine#diff-dcbcac55a634031f9cc73707da6e4b18
Issue #1969.
It was holding on to a Value* (i.e. a std::shared_ptr<ValidPathInfo>*)
outside of the pathInfoCache lock, so the std::shared_ptr could be
destroyed between the release of the lock and the decrement of the
std::shared_ptr refcount. This can happen if more than
'path-info-cache-size' paths are added in the meantime, *or* if
clearPathInfoCache() is called. The hydra-queue-runner queue monitor
thread periodically calls the later, so is likely to trigger a crash.
Fixes https://github.com/NixOS/hydra/issues/542.
Doing so prevents emacs tags from working, as well as makes the code extremely
confusing for a newbie.
In the prior state, if someone wants to find the definition of "ExprApp" for
example, a grep through the code reveals nothing. Since the definition could be
hiding in numerous ".h" files, it's really difficult to find. This personally
took me several hours to figure out.
This can be iterated on and currently leaves out settings we know we
want to forward, but it fixes#1713 and fixes#1935 and isn't
fundamentally broken like the status quo. Future changes are suggested
in a comment.
Flex's regexes have an annoying feature: the dot matches everything
except a newline. This causes problems for expressions like:
"${0}\
"
where the backslash-newline combination matches this rule instead of the
intended one mentioned in the comment:
<STRING>\$|\\|\$\\ {
/* This can only occur when we reach EOF, otherwise the above
(...|\$[^\{\"\\]|\\.|\$\\.)+ would have triggered.
This is technically invalid, but we leave the problem to the
parser who fails with exact location. */
return STR;
}
However, the parser actually accepts the resulting token sequence
('"' DOLLAR_CURLY 0 '}' STR '"'), which is a problem because the lexer
rule didn't assign anything to yylval. Ultimately this leads to a crash
when dereferencing a NULL pointer in ExprConcatStrings::bindVars().
The fix does change the syntax of the language in some corner cases
but I think it's only turning previously invalid (or crashing) syntax
to valid syntax. E.g.
"a\
b"
and
''a''\
b''
were previously syntax errors but now both result in "a\nb".
Found by afl-fuzz.
This allows building armv[67]l-linux derivations on compatible aarch64
machines. Failure to add the architecture may result from missing
hardware support, in which case we can't run 32-bit binaries and don't
need to restrict them with seccomp anyway,
This allows specifying additional systems that a machine is able to
build for. This may apply on some armv7-capable aarch64 processors, or
on systems using qemu-user with binfmt-misc to support transparent
execution of foreign-arch programs.
This removes the previous hard-coded assumptions about which systems are
ABI-compatible with which other systems, and instead relies on the user
to specify any additional platforms that they have ensured compatibility
for and wish to build for locally.
NixOS should probably add i686-linux on x86_64-linux systems for this
setting by default.
Otherwise, running e.g.
nix-instantiate --eval -E --strict 'builtins.replaceStrings [""] ["X"] "abc"'
would just hang in an infinite loop.
Found by afl-fuzz.
First attempt of this was reverted in e2d71bd186 because it caused
another infinite loop, which is fixed now and a test added.
This is important since this is given as an example.
Other patterns containing "empty search string" will still
be handled differently on different platforms ("asdf|")
but that's less of an issue.
The overhead of sandbox builds is a problem on NixOS (since building a
NixOS configuration involves a lot of small derivations) but not for
typical non-NixOS use cases. So outside of NixOS we can enable it.
Issue #179.
The assertion is broken because there is no one-to-one mapping from
length of a base64 string to the length of the output.
E.g.
"1q69lz7Empb06nzfkj651413n9icx0njmyr3xzq1j9q=" results in a 32-byte output.
"1q69lz7Empb06nzfkj651413n9icx0njmyr3xzq1j9qy" results in a 33-byte output.
To reproduce, evaluate:
builtins.derivationStrict {
name = "0";
builder = "0";
system = "0";
outputHashAlgo = "sha256";
outputHash = "1q69lz7Empb06nzfkj651413n9icx0njmyr3xzq1j9qy";
}
Found by afl-fuzz.
Otherwise, running e.g.
nix-instantiate --eval -E --strict 'builtins.replaceStrings [""] ["X"] "abc"'
would just hang in an infinite loop.
Found by afl-fuzz.
Instead of having lexicographicOrder() create a temporary sorted array
of Attr*:s and copying attr names from that, copy the attr names
first and then sort that.
Previously, this would fail at startup for non-NixOS installs:
nix-env --help
The fix for this is to just use "nixManDir" as the value for MANPATH
when spawning "man".
To test this, I’m using the following:
$ nix-build release.nix -A build
$ MANPATH= ./result/bin/nix-env --help
Fixes#1627
nix-store --export, nix-store --dump, and nix dump-path would previously
fail silently if writing the data out failed, because
a) FdSink::write ignored exceptions, and
b) the commands relied on FdSink's destructor, which ignores
exceptions, to flush the data out.
This could cause rather opaque issues with installing nixos, because
nix-store --export would happily proceed even if it couldn't write its
data out (e.g. if nix-store --import on the other side of the pipe
failed).
This commit adds tests that expose these issues in the nix-store
commands, and fixes them for all three.
This was caused by derivations with 'allowSubstitutes = false'. Such
derivations will be built locally. However, if there is another
SubstitionGoal that has the output of the first derivation in its
closure, then the path will be simultaneously built and substituted.
There was a check to catch this situation (via pathIsLockedByMe()),
but it no longer worked reliably because substitutions are now done in
another thread. (Thus the comment 'It can't happen between here and
the lockPaths() call below because we're not allowing multi-threading'
was no longer valid.)
The fix is to handle the path already being locked in both
SubstitutionGoal and DerivationGoal.
All ANSI sequences except color setting are now filtered out. In
particular, terminal resets (such as from NixOS VM tests) are filtered
out.
Also, fix the completely broken tab character handling.
builtins.path allows specifying the name of a path (which makes paths
with store-illegal names now addable), allows adding paths with flat
instead of recursive hashes, allows specifying a filter (so is a
generalization of filterSource), and allows specifying an expected
hash (enabling safe path adding in pure mode).
the case of hydra where the overhead of single threaded encoding is more
noticeable e.g most of the time spent in "Sending inputs"/"Receiving outputs"
is due to compression while the actual upload to the binary cache seems
to be negligible.
This is needed by nixos-install, which uses the Nix store on the
installation CD as a substituter. We don't want to disable signature
checking entirely because substitutes from cache.nixos.org should
still be checked. So now we can pas "local?trusted=1" to mark only the
Nix store in /nix as not requiring signatures.
Fixes#1819.
Instead, if a fixed-output derivation produces has an incorrect output
hash, we now unconditionally move the outputs to the path
corresponding with the actual hash and register it as valid. Thus,
after correcting the hash in the Nix expression (e.g. in a fetchurl
call), the fixed-output derivation doesn't have to be built again.
It would still be good to have a command for reporting the actual hash
of a fixed-output derivation (instead of throwing an error), but
"nix-build --hash" didn't do that.
Following discussion with Shea and Graham. It's a big enough change
from the last release. Also, from a semver perspective, 2.0 makes more
sense because we did remove some interfaces (like nix-pull/nix-push).
Some servers, such as Artifactory, allow uploading with PUT and BASIC
auth. This allows nix copy to work to upload binaries to those
servers.
Worked on together with @adelbertc
In this mode, the following restrictions apply:
* The builtins currentTime, currentSystem and storePath throw an
error.
* $NIX_PATH and -I are ignored.
* fetchGit and fetchMercurial require a revision hash.
* fetchurl and fetchTarball require a sha256 attribute.
* No file system access is allowed outside of the paths returned by
fetch{Git,Mercurial,url,Tarball}. Thus 'nix build -f ./foo.nix' is
not allowed.
Thus, the evaluation result is completely reproducible from the
command line arguments. E.g.
nix build --pure-eval '(
let
nix = fetchGit { url = https://github.com/NixOS/nixpkgs.git; rev = "9c927de4b179a6dd210dd88d34bda8af4b575680"; };
nixpkgs = fetchGit { url = https://github.com/NixOS/nixpkgs.git; ref = "release-17.09"; rev = "66b4de79e3841530e6d9c6baf98702aa1f7124e4"; };
in (import (nix + "/release.nix") { inherit nix nixpkgs; }).build.x86_64-linux
)'
The goal is to enable completely reproducible and traceable
evaluation. For example, a NixOS configuration could be fully
described by a single Git commit hash. 'nixos-rebuild' would do
something like
nix build --pure-eval '(
(import (fetchGit { url = file:///my-nixos-config; rev = "..."; })).system
')
where the Git repository /my-nixos-config would use further fetchGit
calls or Git externals to fetch Nixpkgs and whatever other
dependencies it has. Either way, the commit hash would uniquely
identify the NixOS configuration and allow it to reproduced.
* Look for both 'brotli' and 'bro' as external command,
since upstream has renamed it in newer versions.
If neither are found, current runtime behavior
is preserved: try to find 'bro' on PATH.
* Limit amount handed to BrotliEncoderCompressStream
to ensure interrupts are processed in a timely manner.
Testing shows negligible performance impact.
(Other compression sinks don't seem to require this)
E.g.
$ time nix cat-store --store https://cache.nixos.org?local-nar-cache=/tmp/nars \
/nix/store/b0w2hafndl09h64fhb86kw6bmhbmnpm1-blender-2.79/share/icons/hicolor/scalable/apps/blender.svg > /dev/null
real 0m4.139s
$ time nix cat-store --store https://cache.nixos.org?local-nar-cache=/tmp/nars \
/nix/store/b0w2hafndl09h64fhb86kw6bmhbmnpm1-blender-2.79/share/icons/hicolor/scalable/apps/blender.svg > /dev/null
real 0m0.024s
(Before, the second call took ~0.220s.)
This will use a NAR listing in
/tmp/nars/b0w2hafndl09h64fhb86kw6bmhbmnpm1.ls containing all metadata,
including the offsets of regular files inside the NAR. Thus, we don't
need to read the entire NAR. (We do read the entire listing, but
that's generally pretty small. We could use a SQLite DB by borrowing
some more code from nixos-channel-scripts/file-cache.hh.)
This is primarily useful when Hydra is serving files from an S3 binary
cache, in particular when you have giant NARs. E.g. we had some 12 GiB
NARs, so accessing individuals files was pretty slow.
propagated-user-env-packages files in nixpkgs aren't all terminated by
newlines, as buildenv expected. Now it does not require a terminating
newline; note that this introduces a behaviour change: propagated user
env packages may now be spread across multiple lines. However, nix
1.11.x still expects them to be on a single line so this shouldn't be
used in nixpkgs for now.
The storeUri variable in the build-remote hook is declared very much to
the start of the main function and a bunch of lines later, the same
variable gets checked via hasPrefix() but it gets assigned *after* that
check when the most suitable machine for the build was choosen.
So I guess this was just a typo in d16fd24973
and what we really want is to either checkd the prefix *after* assigning
storeUri or use bestMachine->storeUri directly.
I choose the latter, because the former could introduce even more
regressions if the try block where the variable gets assigned terminates
early.
Nevertheless, the reason why the log output didn't work is because
hasPrefix() checked for "ssh://" in front of storeUri, but if the
storeUri isn't set correctly (or at all), we don't get the log file
descriptor set up properly, leading to no log output.
I've adjusted the remote-builds test to include a regression test for
this, so that we can make sure we get a build output when using remote
builds.
In addition to that I've tested this with two of my build farms and the
build logs are emitted correctly again.
Signed-off-by: aszlig <aszlig@nix.build>
The name had become a misnomer since it's not only for substitution
from binary caches, but when adding/copying any
(non-content-addressed) path to a store.
This allows specifying the AWS configuration profile to use. E.g.
nix copy --from s3://my-cache?profile=aws-dev-account /nix/store/cf3isrlqavvd5w7rpky1fa8j9lcnlggm-...
As far as we're concerned, not being able to access a file just means
the file is missing. Plus, AWS explicitly goes out of its way to
return a 403 if the file is missing and the requester doesn't have
permission to list the bucket.
Also getting rid of an old hack that Eelco said was only relevant
to an older AWS SDK.
For example, you can write
src = fetchgit ./.;
and if ./. refers to an unclean working tree, that tree will be copied
to the Nix store. This removes the need for "cleanSource".
This will allow bind and connect to 127.0.0.1, which can reduce purity/
security (if you're running a vulnerable service on localhost) but is
also needed for a ton of test suites, so I'm leaving it turned off by
default but allowing certain derivations to turn it on as needed.
It also allows DNS resolution of arbitrary hostnames but I haven't found
a way to avoid that. In principle I'd just want to allow resolving
localhost but that doesn't seem to be possible.
I don't think this belongs under `build-use-sandbox = relaxed` because we
want it on Hydra and I don't think it's the end of the world.
Used to determine symlink size with stat and value with readlink.
This could technically result in garbage if symlink changed between
calls. Also gets around the broken stat implementation in our
network filesystem (returns size + 1 giving a byte of garbage).
The computation of urlHash didn't take the name into account, so
subsequent fetchurl calls with the same URL but a different name would
resolve to the same cached store path.
The "name" attribute defaults to "source", which we should use for all
similar functions (e.g. fetchTarball and in Hydra) to ensure that we
get a consistent store path regardless of how the tree is fetched.
"source" is not necessarily a correct label, but using an empty name
is problematic: you get an ugly store path ending in a dash, and it's
impossible to have a fixed-output derivation that produces that path
because ".drv" is not a valid store name.
Fixes#904.
You can now include files via the "builders" option, using the syntax
"@<filename>". Having only one option makes it easier to override
builders completely.
For backward compatibility, the default is "@/etc/nix/machines", or
"@<filename>" for each file name in NIX_REMOTE_SYSTEMS.
This makes it slightly more manageable to see at a glance what in a
build's sandbox profile is unique to the build and what is standard. Also
a first step to factoring more of our Darwin logic into scheme functions
that will allow us a bit more flexibility. And of course less of that
nasty codegen in C++! 😀
This speeds up commands like "nix cat-store". For example:
$ time nix cat-store --store https://cache.nixos.org?local-nar-cache=/tmp/nar-cache /nix/store/i60yncmq6w9dyv37zd2k454g0fkl3arl-systemd-234/etc/udev/udev.conf
real 0m4.336s
$ time nix cat-store --store https://cache.nixos.org?local-nar-cache=/tmp/nar-cache /nix/store/i60yncmq6w9dyv37zd2k454g0fkl3arl-systemd-234/etc/udev/udev.conf
real 0m0.045s
The primary motivation is to allow hydra-server to serve files from S3
binary caches. Previously Hydra had a hack to do "nix-store -r
<path>", but that fetches the entire closure so is prohibitively
expensive.
There is no garbage collection of the NAR cache yet. Also, the entire
NAR is read when accessing a single member file. We could generate the
NAR listing to provide random access.
Note: the NAR cache is indexed by the store path hash, not the content
hash, so NAR caches should not be shared between binary caches, unless
you're sure that all your builds are binary-reproducible.
Probably as a result of a bad merge in
4b8f1b0ec0, we had both a
BinaryCacheStoreAccessor and a
RemoteFSAccessor. BinaryCacheStore::getFSAccessor() returned the
latter, but BinaryCacheStore::addToStore() checked for the
former. This probably caused hydra-queue-runner to download paths that
it just uploaded.
This check spuriously fails for e.g. git@github.com:NixOS/nixpkgs.git,
and even for ssh://git@github.com/NixOS/nixpkgs.git, and is made
redundant by the checks git itself will do when fetching the repo. We
instead pass a -- before passing the URI to git to avoid injection.
I needed this to test ACL/xattr removal in
canonicalisePathMetaData(). Might also be useful if you need to build
old Nixpkgs that doesn't have the required patches to remove
setuid/setgid creation.
The worker threads could exit prematurely if they finished processing
all items while the main thread was still adding items. In particular,
this caused hanging nix-store --serve processes in the build farm.
Also, process items from the main thread.
It was getting too much like whac-a-mole listing all the retriable error
conditions, so we now retry by default and list the cases where retrying
is almost certainly hopeless.
I find the error message 'nix-env --set-flag priority NUMBER PKGNAME'
not as helpful as it could be :
- doesn't share the current priorities
- doesn't say that the command must be run on the already installed
PKGNAME (which is confusing the first time)
- the doc needs careful reading:
"If there are multiple derivations matching a name in args that have the same name (e.g., gcc-3.3.6 and gcc-4.1.1), then the derivation with the highest priority is used."
if one stops reading there, he is screwed. Salvation comes with reading "A derivation can define a priority by declaring the meta.priority attribute. This attribute should be a number, with a higher value denoting a lower priority. The default priority is 0."
To sum it up, lower number wins. I tried to convey this idea in the
message too.
This is a hack to make hydra-queue-runner free its temproots
periodically, thereby ensuring that garbage collection of the
corresponding paths is not blocked until the queue runner is
restarted.
It would be better if temproots could be released earlier than at
process exit. I started working on a RAII object returned by functions
like addToStore() that releases temproots. However, this would be a
pretty massive change so I gave up on it for now.
For example,
$ nix-store -q --roots /nix/store/7phd2sav7068nivgvmj2vpm3v47fd27l-patchelf-0.8pre845_0315148
{temp:1}
denotes that the path is only being kept alive by a temporary root
(i.e. /nix/var/nix/temproots/). Similarly,
$ nix-store --gc --print-roots
...
{memory:9} -> /nix/store/094gpjn9f15ip17wzxhma4r51nvsj17p-curl-7.53.1
shows that curl is being used by some process.
This command shows why a package has another package in its runtime
closure. For example, to see why VLC has libdrm.dev in its closure:
$ nix why-depends nixpkgs.vlc nixpkgs.libdrm.dev
/nix/store/g901z9pcj0n5yy5n6ykxk3qm4ina1d6z-vlc-2.2.5.1:
lib/libvlccore.so.8.0.0: …nfig:/nix/store/405lmx6jl8lp0ad1vrr6j498chrqhz8g-libdrm-2.4.75-d…
/nix/store/s3nm7kd8hlcg0facn2q1ff2n7wrwdi2l-mesa-noglu-17.0.7-dev:
nix-support/propagated-native-build-inputs: …-dev /nix/store/405lmx6jl8lp0ad1vrr6j498chrqhz8g-libdrm-2.4.75-d…
Thus, VLC's lib/libvlccore.so.8.0.0 as well as mesa-noglu's
nix-support/propagated-native-build-inputs cause the dependency.
In particular, process() won't return as long as there are active
items. This prevents work item lambdas from referring to stack frames
that no longer exist.
Since we may use a dedicated file descriptor in the future, this
allows us to change it. So builders can do
if [[ -n $NIX_LOG_FD ]]; then
echo "@nix { message... }" >&$NIX_LOG_FD
fi
Nix can now automatically run the garbage collector during builds or
while adding paths to the store. The option "min-free = <bytes>"
specifies that Nix should run the garbage collector whenever free
space in the Nix store drops below <bytes>. It will then delete
garbage until "max-free" bytes are available.
Garbage collection during builds is asynchronous; running builds are
not paused and new builds are not blocked. However, there also is a
synchronous GC run prior to the first build/substitution.
Currently, no old GC roots are deleted (as in "nix-collect-garbage
-d").
Since file locks are per-process rather than per-file-descriptor, the
garbage collector would always acquire a lock on its own temproots
file and conclude that it's stale.
Without this, substitute info is fetched sequentially, which is
superslow. In the old UI (e.g. nix-build), we call printMissing(),
which calls queryMissing(), thereby preheating the binary cache
cache. But the new UI doesn't do that.
In particular, drop the "build-" and "gc-" prefixes which are
pointless. So now you can say
nix build --no-sandbox
instead of
nix build --no-build-use-sandbox
This is useful for testing commands in isolation.
For example,
$ nix run nixpkgs.geeqie -i -k DISPLAY -k XAUTHORITY -c geeqie
runs geeqie in an empty environment, except for $DISPLAY and
$XAUTHORITY.
E.g.
nix run nixpkgs.hello -c hello --greeting Hallo
Note that unlike "nix-shell --command", no quoting of arguments is
necessary.
"-c" (short for "--command") cannot be combined with "--" because they
both consume all remaining arguments. But since installables shouldn't
start with a dash, this is unlikely to cause problems.
Running "nix run" with a diverted store, e.g.
$ nix run --store local?root=/tmp/nix nixpkgs.hello
stopped working when Nix became multithreaded, because
unshare(CLONE_NEWUSER) doesn't work in multithreaded processes. The
obvious solution is to terminate all other threads first, but 1) there
is no way to terminate Boehm GC marker threads; and 2) it appears that
the kernel has a race where unshare(CLONE_NEWUSER) will still fail for
some indeterminate amount of time after joining other threads.
So instead, "nix run" will now exec() a single-threaded helper ("nix
__run_in_chroot") that performs the actual unshare()/chroot()/exec().
Now that we use threads in lots of places, it's possible for
TunnelLogger::log() to be called asynchronously from other threads
than the main loop. So we need to ensure that STDERR_NEXT messages
don't clobber other messages.
Besides being unused, this function has a bug that it will incorrectly
decode the path component Ubuntu\04016.04.2\040LTS\040amd64 as
"Ubuntu.04.2 LTS amd64" instead of "Ubuntu 16.04.2 LTS amd64".
This adds an argument "rev" specififying the Git commit hash. The
existing argument "rev" is renamed to "ref". The default value for
"ref" is "master". When specifying a hash, it's necessary to specify a
ref since we're not cloning the entire repository but only fetching a
specific ref.
Example usage:
builtins.fetchgit {
url = https://github.com/NixOS/nixpkgs.git;
ref = "release-16.03";
rev = "c1c0484041ab6f9c6858c8ade80a8477c9ae4442";
};
The package list is now cached in
~/.cache/nix/package-search.json. This gives a substantial speedup to
"nix search" queries. For example (on an SSD):
First run: (no package search cache, cold page cache)
$ time nix search blender
Attribute name: nixpkgs.blender
Package name: blender
Version: 2.78c
Description: 3D Creation/Animation/Publishing System
real 0m6.516s
Second run: (package search cache populated)
$ time nix search blender
Attribute name: nixpkgs.blender
Package name: blender
Version: 2.78c
Description: 3D Creation/Animation/Publishing System
real 0m0.143s
In particular, don't use base-64, which we don't support. (We do have
base-32 redirects for hysterical reasons.)
Also, add a test for the hashed mirror feature.
This doesn't work in read-only mode, ensuring that operations like
nix path-info --store https://cache.nixos.org -S nixpkgs.hello
(asking for the closure size of nixpkgs.hello in cache.nixos.org) work
when nixpkgs.hello doesn't exist in the local store.
On second though this was annoying. E.g. "nix log nixpkgs.hello" would
build/download Hello first, even though the log can be fetched
directly from the binary cache.
May need to revisit this.
This allows builds to call setuid binaries. This was previously
possible until we started using seccomp. Turns out that seccomp by
default disallows processes from acquiring new privileges. Generally,
any use of setuid binaries (except those created by the builder
itself) is by definition impure, but some people were relying on this
ability for certain tests.
Example:
$ nix build '(with import <nixpkgs> {}; runCommand "foo" {} "/run/wrappers/bin/ping -c 1 8.8.8.8; exit 1")' --no-allow-new-privileges
builder for ‘/nix/store/j0nd8kv85hd6r4kxgnwzvr0k65ykf6fv-foo.drv’ failed with exit code 1; last 2 log lines:
cannot raise the capability into the Ambient set
: Operation not permitted
$ nix build '(with import <nixpkgs> {}; runCommand "foo" {} "/run/wrappers/bin/ping -c 1 8.8.8.8; exit 1")' --allow-new-privileges
builder for ‘/nix/store/j0nd8kv85hd6r4kxgnwzvr0k65ykf6fv-foo.drv’ failed with exit code 1; last 6 log lines:
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=46 time=15.2 ms
Fixes#1429.
Functions like copyClosure() had 3 bool arguments, which creates a
severe risk of mixing up arguments.
Also, implement copyClosure() using copyPaths().
Cygwin sqlite3 is patched to call SetDllDirectory("/usr/bin") on init, which
affects the current process and is inherited by child processes. It causes
DLLs to be loaded from /usr/bin/ before $PATH, which breaks all sorts of
things. A typical failures would be header/lib version mismatches (e.g.
openssl when running checkPhase on openssh). We'll just set it back to the
default value.
Note that this is a problem with the cygwin version of sqlite3 (currently
3.18.0). nixpkgs doesn't have the problematic patch.
There's no reason to restrict this to Error exceptions. This shouldn't
matter to #1407 since the repl doesn't catch non-Error exceptions
anyway, but you never know...
Recently aws-sdk-cpp quietly switched to using S3 virtual host URIs
(https://github.com/aws/aws-sdk-cpp/commit/69d9c53882), i.e. it sends
requests to http://<bucket>.<region>.s3.amazonaws.com rather than
http://<region>.s3.amazonaws.com/<bucket>. However this interacts
badly with curl connection reuse. For example, if we do the following:
1) Check whether a bucket exists using GetBucketLocation.
2) If it doesn't, create it using CreateBucket.
3) Do operations on the bucket.
then 3) will fail for a minute or so with a NoSuchBucket exception,
presumably because the server being hit is a fallback for cases when
buckets don't exist.
Disabling the use of virtual hosts ensures that 3) succeeds
immediately. (I don't know what S3's consistency guarantees are for
bucket creation, but in practice buckets appear to be available
immediately.)
Newer versions of aws-sdk-cpp call CalculateDelayBeforeNextRetry()
even for non-retriable errors (like NoSuchKey) whih causes log spam in
hydra-queue-runner.
Sandboxes cannot be nested, so if Nix's build runs inside a sandbox,
it cannot use a sandbox itself. I don't see a clean way to detect
whether we're in a sandbox, so use a test-specific hack.
https://github.com/NixOS/nix/issues/1413
In particular, UF_IMMUTABLE (uchg) needs to be cleared to allow the
path to be garbage-collected or optimised.
See https://github.com/NixOS/nixpkgs/issues/25819.
+ the file from being garbage-collected.
Thus, instead of ‘--option <name> <value>’, you can write ‘--<name>
<value>’. So
--option http-connections 100
becomes
--http-connections 100
Apart from brevity, the difference is that it's not an error to set a
non-existent option via --option, but unrecognized arguments are
fatal.
Boolean options have special treatment: they're mapped to the
argument-less flags ‘--<name>’ and ‘--no-<name>’. E.g.
--option auto-optimise-store false
becomes
--no-auto-optimise-store
Even with "build-use-sandbox = false", we now use sandboxing with a
permissive profile that allows everything except the creation of
setuid/setgid binaries.
Also, add rules to allow fixed-output derivations to access the
network.
These rules are sufficient to build stdenvDarwin without any
__sandboxProfile magic.
The filename used was not unique and owned by the build user, so
builds could fail with
error: while setting up the build environment: cannot unlink ‘/nix/store/99i210ihnsjacajaw8r33fmgjvzpg6nr-bison-3.0.4.drv.sb’: Permission denied
runResolver() was barfing on directories like
/System/Library/Frameworks/Security.framework/Versions/Current/PlugIns. It
should probably do something sophisticated for frameworks, but let's
ignore them for now.
This fixes
error: getting attributes of path ‘Versions/Current/CoreFoundation’: No such file or directory
when /System/Library/Frameworks/CoreFoundation.framework/CoreFoundation is a symlink.
Also fixes a segfault when encounting a file that is not a MACH binary (such
as /dev/null, which is included in __impureHostDeps in Nixpkgs).
Possibly fixes#786.
Fixes
src/libstore/build.cc:2321:45: error: non-constant-expression cannot be narrowed from type 'int' to 'scmp_datum_t' (aka 'unsigned long') in initializer list [-Wc++11-narrowing]
EAs/ACLs are not part of the NAR canonicalisation. Worse, setting an
ACL allows a builder to create writable files in the Nix store. So get
rid of them.
Closes#185.
This prevents builders from setting the S_ISUID or S_ISGID bits,
preventing users from using a nixbld* user to create a setuid/setgid
binary to interfere with subsequent builds under the same nixbld* uid.
This is based on aszlig's seccomp code
(47f587700d).
Reported by Linus Heckemann.
Fixes
client# error: size mismatch importing path ‘/nix/store/ywf5fihjlxwijm6ygh6s0a353b5yvq4d-libidn2-0.16’; expected 0, got 120264
This is mostly an artifact of the NixOS VM test environment, where the
Nix database doesn't contain hashes/sizes.
http://hydra.nixos.org/build/53537471
And add a 116 KiB ash shell from busybox to the release build. This
helps to make sandbox builds work out of the box on non-NixOS systems
and with diverted stores.
This is useful when we're using a diverted store (e.g. "--store
local?root=/tmp/nix") in conjunction with a statically-linked sh from
the host store (e.g. "sandbox-paths =/bin/sh=/nix/store/.../bin/busybox").
Previously, if a directory `foo` existed and a file `foo-` (where `-` is any character that is sorted before `/`), then `readDirectory` would return an empty list.
To fix this, we now use a tree where we can just access the children of the node, and do not need to rely on sorting behavior to list the contents of a directory.
It now means "paths that were built locally". It no longer includes
paths that were added locally. For those we don't need info.ultimate,
since we have the content-addressability assertion (info.ca).
This is a little convenience command that opens the Nix expression of
the specified package. For example,
nix edit nixpkgs.perlPackages.Moose
opens <nixpkgs/pkgs/top-level/perl-packages.nix> in $EDITOR (at the
right line number for some editors).
This requires the package to have a meta.position attribute.
There is a security issue when a build accidentally stores its $TMPDIR
in some critical place, such as an RPATH. If
TMPDIR=/tmp/nix-build-..., then any user on the system can recreate
that directory and inject libraries into the RPATH of programs
executed by other users. Since /build probably doesn't exist (or isn't
world-writable), this mitigates the issue.
Opening an SSHStore or LegacySSHStore does not actually establish a
connection, so the try/catch block here did nothing. Added a
Store::connect() method to test whether a connection can be
established.
This is useful for one-off situations where you want to specify a
builder on the command line instead of having to mess with
nix.machines. E.g.
$ nix-build -A hello --argstr system x86_64-darwin \
--option builders 'root@macstadium1 x86_64-darwin'
will perform the specified build on "macstadium1".
It also removes the need for a separate nix.machines file since you
can specify builders in nix.conf directly. (In fact nix.machines is
yet another hack that predates the general nix.conf configuration
file, IIRC.)
Note: this option is supported by the daemon for trusted users. The
fact that this allows trusted users to specify paths to SSH keys to
which they don't normally have access is maybe a bit too much trust...
For backwards compatibility, if the URI is just a hostname, ssh://
(i.e. LegacySSHStore) is prepended automatically.
Also, all fields except the URI are now optional. For example, this is
a valid nix.machines file:
local?root=/tmp/nix
This is useful for testing the remote build machinery since you don't
have to mess around with ssh.
This is to simplify remote build configuration. These environment
variables predate nix.conf.
The build hook now has a sensible default (namely build-remote).
The current load is kept in the Nix state directory now.
Since build-remote uses buildDerivation() now, we don't need to copy
the .drv file anymore. This greatly reduces the set of input paths
copied to the remote side (e.g. from 392 to 51 store paths for GNU
hello on x86_64-darwin).
This default implementation of buildPaths() does nothing if all
requested paths are already valid, and throws an "unsupported
operation" error otherwise. This fixes a regression introduced by
c30330df6f in binary cache and legacy
SSH stores.
With catch-all rules, we hide potential errors.
It turns out that a4744254 made one cath-all useless. Flex detected that
is was impossible to reach.
The other is more subtle, as it can only trigger on unfinished escapes
in unfinished strings, which only occurs at EOF.
This caused "nix-store --import" to compute an incorrect hash on NARs
that don't fit in an unsigned int. The import would succeed, but
"nix-store --verify-path" or subsequent exports would detect an
incorrect hash.
A deeper issue is that the export/import format does not contain a
hash, so we can't detect such issues early.
Also, I learned that -Wall does not warn about this.
So for instance "nix copy --to ... nixpkgs.hello" will build
nixpkgs.hello first. It's debatable whether this is a good idea. It
seems desirable for commands like "nix copy" but maybe not for
commands like "nix path-info".
Thus
$ nix build -f foo.nix
will build foo.nix.
And
$ nix build
will build default.nix. However, this may not be a good idea because
it's kind of inconsistent, given that "nix build foo" will build the
"foo" attribute from the default installation source (i.e. the
synthesis of $NIX_PATH), rather than ./default.nix. So I may revert
this.
This allows commands like 'nix path-info', 'nix copy', 'nix verify'
etc. to work on arbitrary installables. E.g. to copy geeqie to a
binary cache:
$ nix copy -r --to file:///tmp/binary-cache nixpkgs.geeqie
Or to get the closure size of thunderbird:
$ nix path-info -S nixpkgs.thunderbird
In particular, this disallows attribute names containing dots or
starting with dots. Hydra already disallowed these. This affects the
following packages in Nixpkgs master:
2048-in-terminal
2bwm
389-ds-base
90secondportraits
lispPackages.3bmd
lispPackages.hu.dwim.asdf
lispPackages.hu.dwim.def
Closes#1342.
The typical use is to inherit Config and add Setting<T> members:
class MyClass : private Config
{
Setting<int> foo{this, 123, "foo", "the number of foos to use"};
Setting<std::string> bar{this, "blabla", "bar", "the name of the bar"};
MyClass() : Config(readConfigFile("/etc/my-app.conf"))
{
std::cout << foo << "\n"; // will print 123 unless overriden
}
};
Currently, this is used by Store and its subclasses for store
parameters. You now get a warning if you specify a non-existant store
parameter in a store URI.
This provides a significant speedup, e.g. 64 s -> 12 s for
nix-build --dry-run -I nixpkgs=channel:nixos-16.03 '<nixpkgs/nixos/tests/misc.nix>' -A test
on a cold local and CloudFront cache.
The alternative is to use lots of concurrent daemon connections but
that seems wasteful.
This is useless because the client also caches path info, and can
cause problems for long-running clients like hydra-queue-runner
(i.e. it may return cached info about paths that have been
garbage-collected).
This fixes "No such file or directory" when opening /dev/ptmx
(e.g. http://hydra.nixos.org/build/51094249).
The reason appears to be some changes to /dev/ptmx / /dev/pts handling
between Linux 4.4 and 4.9. See
https://patchwork.kernel.org/patch/7832531/.
The fix is to go back to mounting a proper /dev/pts instance inside
the sandbox. Happily, this now works inside user namespaces, even for
unprivileged users. So
NIX_REMOTE=local?root=/tmp/nix nix-build \
'<nixpkgs/nixos/tests/misc.nix>' -A test
works for non-root users.
The downside is that the fix breaks sandbox builds on older kernels
(probably pre-4.6), since mounting a devpts fails inside user
namespaces for some reason I've never been able to figure out. Builds
on those systems will fail with
error: while setting up the build environment: mounting /dev/pts: Invalid argument
Ah well.
Execute a given program with the (optional) given arguments as the
user running the evaluation, parsing stdout as an expression to be
evaluated.
There are many use cases for nix that would benefit from being able to
run arbitrary code during evaluation, including but not limited to:
* Automatic git fetching to get a sha256 from a git revision
* git rev-parse HEAD
* Automatic extraction of information from build specifications from
other tools, particularly language-specific package managers like
cabal or npm
* Secrets decryption (e.g. with nixops)
* Private repository fetching
Ideally, we would add this functionality in a more principled way to
nix, but in the mean time 'builtins.exec' can be used to get these
tasks done.
The primop is only available when the
'allow-unsafe-native-code-during-evaluation' nix option is true. That
flag also enables the 'importNative' primop, which is strictly more
powerful but less convenient (since it requires compiling a plugin
against the running version of nix).
So if "text-compression=br", the .ls file in S3 will get a
Content-Encoding of "br". Brotli appears to compress better than xz
for this kind of file and is natively supported by browsers.
You can now set the store parameter "text-compression=br" to compress
textual files in the binary cache (i.e. narinfo and logs) using
Brotli. This sets the Content-Encoding header; the extension of
compressed files is unchanged.
You can separately specify the compression of log files using
"log-compression=br". This is useful when you don't want to compress
narinfo files for backward compatibility.
Build logs on cache.nixos.org are compressed using Brotli (since this
allows them to be decompressed automatically by Chrome and Firefox),
so it's handy if "nix log" can decompress them.
This allows various Store implementations to provide different ways to
get build logs. For example, BinaryCacheStore can get the build logs
from the binary cache.
Also, remove the log-servers option since we can use substituters for
this.
* Unify SSH code in SSHStore and LegacySSHStore.
* Fix a race starting the SSH master. We now wait synchronously for
the SSH master to finish starting. This prevents the SSH clients
from starting their own connections.
* Don't use a master if max-connections == 1.
* Add a "max-connections" store parameter.
* Add a "compress" store parameter.
"build-max-jobs" and the "-j" option can now be set to "auto" to use
the number of CPUs in the system. (Unlike build-cores, it doesn't use
0 to imply auto-configuration, because a) magic values are a bad idea
in general; b) 0 is a legitimate value used to disable local
building.)
Fixes#1198.
Need to remember that std::map::insert() and emplace() don't overwrite
existing entries...
This fixes a regression relative to 1.11 that in particular triggers
in nested nix-shells.
Before:
$ nativeBuildInputs=/foo nix-shell -p hello --run 'hello'
build input /foo does not exist
After:
$ nativeBuildInputs=/foo nix-shell -p hello --run 'hello'
Hello, world!
Previously, the Settings class allowed other code to query for string
properties, which led to a proliferation of code all over the place making
up new options without any sort of central registry of valid options. This
commit pulls all those options back into the central Settings class and
removes the public get() methods, to discourage future abuses like that.
Furthermore, because we know the full set of options ahead of time, we
now fail loudly if someone enters an unrecognized option, thus preventing
subtle typos. With some template fun, we could probably also dump the full
set of options (with documentation, defaults, etc.) to the command line,
but I'm not doing that yet here.
... and use this in Downloader::downloadCached(). This fixes
$ nix-build https://nixos.org/channels/nixos-16.09-small/nixexprs.tar.xz -A hello
error: cannot import path ‘/nix/store/csfbp1s60dkgmk9f8g0zk0mwb7hzgabd-nixexprs.tar.xz’ because it lacks a valid signature
This allows <nix/fetchurl.nix> to fetch private Git/Mercurial
repositories, e.g.
import <nix/fetchurl.nix> {
url = https://edolstra@bitbucket.org/edolstra/my-private-repo/get/80a14018daed.tar.bz2;
sha256 = "1mgqzn7biqkq3hf2697b0jc4wabkqhmzq2srdymjfa6sb9zb6qs7";
}
where /etc/nix/netrc contains:
machine bitbucket.org
login edolstra
password blabla...
This works even when sandboxing is enabled.
To do: add unpacking support (i.e. fetchzip functionality).
Some sites (e.g. BitBucket) give a helpful 401 error when trying to
download a private archive if the User-Agent contains "curl", but give
a redirect to a login page otherwise (so for instance
"nix-prefetch-url" will succeed but produce useless output).
This adds support for s3:// URIs in all places where Nix allows URIs,
e.g. in builtins.fetchurl, builtins.fetchTarball, <nix/fetchurl.nix>
and NIX_PATH. It allows fetching resources from private S3 buckets,
using credentials obtained from the standard places (i.e. AWS_*
environment variables, ~/.aws/credentials and the EC2 metadata
server). This may not be super-useful in general, but since we already
depend on aws-sdk-cpp, it's a cheap feature to add.
Currently, 'nix-daemon --stdio' is always failing for me, due to the
splice call always failing with (on a 32-bit host):
splice(0, NULL, 3, NULL, 4294967295, SPLICE_F_MOVE) = -1 EINVAL (Invalid argument)
With a bit of ftracing (and luck) the problem seems to be that splice()
always fails with EINVAL if the len cast as ssize_t is negative:
http://lxr.free-electrons.com/source/fs/read_write.c?v=4.4#L384
So use SSIZE_MAX instead of SIZE_MAX.
Because config.h can #define things like _FILE_OFFSET_BITS=64 and not
every compilation unit includes config.h, we currently compile half of
Nix with _FILE_OFFSET_BITS=64 and other half with _FILE_OFFSET_BITS
unset. This causes major havoc with the Settings class on e.g. 32-bit ARM,
where different compilation units disagree with the struct layout.
E.g.:
diff --git a/src/libstore/globals.cc b/src/libstore/globals.cc
@@ -166,6 +166,8 @@ void Settings::update()
_get(useSubstitutes, "build-use-substitutes");
+ fprintf(stderr, "at Settings::update(): &useSubstitutes = %p\n", &nix::settings.useSubstitutes);
_get(buildUsersGroup, "build-users-group");
diff --git a/src/libstore/remote-store.cc b/src/libstore/remote-store.cc
+++ b/src/libstore/remote-store.cc
@@ -138,6 +138,8 @@ void RemoteStore::initConnection(Connection & conn)
void RemoteStore::setOptions(Connection & conn)
{
+ fprintf(stderr, "at RemoteStore::setOptions(): &useSubstitutes = %p\n", &nix::settings.useSubstitutes);
conn.to << wopSetOptions
Gave me:
at Settings::update(): &useSubstitutes = 0xb6e5c5cb
at RemoteStore::setOptions(): &useSubstitutes = 0xb6e5c5c7
That was not a fun one to debug!
This writes info about every path in the closure in the same format as
‘nix path-info --json’. Thus it also includes NAR hashes and sizes.
Example:
[
{
"path": "/nix/store/10h6li26i7g6z3mdpvra09yyf10mmzdr-hello-2.10",
"narHash": "sha256:0ckdc4z20kkmpqdilx0wl6cricxv90lh85xpv2qljppcmz6vzcxl",
"narSize": 197648,
"references": [
"/nix/store/10h6li26i7g6z3mdpvra09yyf10mmzdr-hello-2.10",
"/nix/store/27binbdy296qvjycdgr1535v8872vz3z-glibc-2.24"
],
"closureSize": 20939776
},
{
"path": "/nix/store/27binbdy296qvjycdgr1535v8872vz3z-glibc-2.24",
"narHash": "sha256:1nfn3m3p98y1c0kd0brp80dn9n5mycwgrk183j17rajya0h7gax3",
"narSize": 20742128,
"references": [
"/nix/store/27binbdy296qvjycdgr1535v8872vz3z-glibc-2.24"
],
"closureSize": 20742128
}
]
Fixes#1134.
Previously, all derivation attributes had to be coerced into strings
so that they could be passed via the environment. This is lossy
(e.g. lists get flattened, necessitating configureFlags
vs. configureFlagsArray, of which the latter cannot be specified as an
attribute), doesn't support attribute sets at all, and has size
limitations (necessitating hacks like passAsFile).
This patch adds a new mode for passing attributes to builders, namely
encoded as a JSON file ".attrs.json" in the current directory of the
builder. This mode is activated via the special attribute
__structuredAttrs = true;
(The idea is that one day we can set this in stdenv.mkDerivation.)
For example,
stdenv.mkDerivation {
__structuredAttrs = true;
name = "foo";
buildInputs = [ pkgs.hello pkgs.cowsay ];
doCheck = true;
hardening.format = false;
}
results in a ".attrs.json" file containing (sans the indentation):
{
"buildInputs": [],
"builder": "/nix/store/ygl61ycpr2vjqrx775l1r2mw1g2rb754-bash-4.3-p48/bin/bash",
"configureFlags": [
"--with-foo",
"--with-bar=1 2"
],
"doCheck": true,
"hardening": {
"format": false
},
"name": "foo",
"nativeBuildInputs": [
"/nix/store/10h6li26i7g6z3mdpvra09yyf10mmzdr-hello-2.10",
"/nix/store/4jnvjin0r6wp6cv1hdm5jbkx3vinlcvk-cowsay-3.03"
],
"propagatedBuildInputs": [],
"propagatedNativeBuildInputs": [],
"stdenv": "/nix/store/f3hw3p8armnzy6xhd4h8s7anfjrs15n2-stdenv",
"system": "x86_64-linux"
}
"passAsFile" is ignored in this mode because it's not needed - large
strings are included directly in the JSON representation.
It is up to the builder to do something with the JSON
representation. For example, in bash-based builders, lists/attrsets of
string values could be mapped to bash (associative) arrays.
This closes a long-time bug that allowed builds to hang Nix
indefinitely (regardless of timeouts) simply by doing
exec > /dev/null 2>&1; while true; do true; done
Now, on EOF, we just send SIGKILL to the child to make sure it's
really gone.
This allows other threads to install callbacks that run in a regular,
non-signal context. In particular, we can use this to signal the
downloader thread to quit.
Closes#1183.
Regression from a5f2750e ("Fix early removal of rc-file for nix-shell").
The removal of BASH_ENV causes nothing to be executed by bash if it
detects itself in a non-interactive context. Instead, just
use the same condition used by bash to launch bash differently.
According to bash sources, the condition (stdin and stder both
must be TTYs) is specified by POSIX so this should be pretty
safe to rely on.
Fixes#1171 on master, needs a backport to the Perl code in 1.11.
I had observed that 'bash --rcfile' would do nothing in a
non-interactive context and cause nothing to be executed if a script
using nix-shell shebangs were run in a non-interactive context.
The 'args' variable here is shadowing one in the outer scope and its
contents end up unused. This causes any '#! nix-shell' lines to
effectively be ignored. The intention here was to clear the args vector,
as far as I can tell (and it seems to work).
It failed with
AWS error uploading ‘6gaxphsyhg66mz0a00qghf9nqf7majs2.ls.xz’: Unable to parse ExceptionName: MissingContentLength Message: You must provide the Content-Length HTTP header.
possibly because the istringstream_nocopy introduced in
0d2ebb4373 doesn't supply the seek
method that the AWS library expects. So bring back the old version,
but only for S3BinaryCacheStore.
That is, when build-repeat > 0, and the output of two rounds differ,
then print a warning rather than fail the build. This is primarily to
let Hydra check reproducibility of all packages.
These syscalls are only available in 32bit architectures, but libseccomp
should handle them correctly even if we're on native architectures that
do not have these syscalls.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Commands such as "cp -p" also use fsetxattr() in addition to fchown(),
so we need to make sure these syscalls always return successful as well
in order to avoid nasty "Invalid value" errors.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
What we basically want is a seccomp mode 2 BPF program like this but for
every architecture:
BPF_STMT(BPF_LD+BPF_W+BPF_ABS, offsetof(struct seccomp_data, nr)),
BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, __NR_chown, 4, 0),
BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, __NR_fchown, 3, 0),
BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, __NR_fchownat, 2, 0),
BPF_JUMP(BPF_JMP+BPF_JEQ+BPF_K, __NR_lchown, 1, 0),
BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_ALLOW),
BPF_STMT(BPF_RET+BPF_K, SECCOMP_RET_ERRNO)
However, on 32 bit architectures we do have chown32, lchown32 and
fchown32, so we'd need to add all the architecture blurb which
libseccomp handles for us.
So we only need to make sure that we add the 32bit seccomp arch while
we're on x86_64 and otherwise we just stay at the native architecture
which was set during seccomp_init(), which more or less replicates
setting 32bit personality during runChild().
The FORCE_SUCCESS() macro here could be a bit less ugly but I think
repeating the seccomp_rule_add() all over the place is way uglier.
Another way would have been to create a vector of syscalls to iterate
over, but that would make error messages uglier because we can either
only print the (libseccomp-internal) syscall number or use
seccomp_syscall_resolve_num_arch() to get the name or even make the
vector a pair number/name, essentially duplicating everything again.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
We're going to use libseccomp instead of creating the raw BPF program,
because we have different syscall numbers on different architectures.
Although our initial seccomp rules will be quite small it really doesn't
make sense to generate the raw BPF program because we need to duplicate
it and/or make branches on every single architecture we want to suuport.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This reverts commit ff0c0b645c.
We're going to use seccomp to allow "cp -p" and force chown-related
syscalls to always return 0.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
This solves a problem whereby if /gnu/store/.links had enough entries,
ext4's directory index would be full, leading to link(2) returning
ENOSPC.
* nix/libstore/optimise-store.cc (LocalStore::optimisePath_): Upon
ENOSPC from link(2), print a message and return instead of throwing a
'SysError'.
The SSHStore PR adds this functionality to the daemon, but we have to
handle the case where the Nix daemon is 1.11.
Also, don't require signatures for trusted users. This restores 1.11
behaviour.
Fixes https://github.com/NixOS/hydra/issues/398.
For example, you can now set
build-sandbox-paths = /dev/nvidiactl?
to specify that /dev/nvidiactl should only be mounted in the sandbox
if it exists in the host filesystem. This is useful e.g. for EC2
images that should support both CUDA and non-CUDA instances.
On some architectures (like x86_64 or i686, but not ARM for example)
overflow during integer division causes a crash due to SIGFPE.
Reproduces on a 64-bit system with:
nix-instantiate --eval -E '(-9223372036854775807 - 1) / -1'
The only way this can happen is when the smallest possible integer is
divided by -1, so just special-case that.
The removal of CachedFailure caused the value of TimedOut to change,
which broke timed-out handling in Hydra (so timed-out builds would
show up as "aborted" and would be retried, e.g. at
http://hydra.nixos.org/build/42537427).
The store parameter "write-nar-listing=1" will cause BinaryCacheStore
to write a file ‘<store-hash>.ls.xz’ for each ‘<store-hash>.narinfo’
added to the binary cache. This file contains an XZ-compressed JSON
file describing the contents of the NAR, excluding the contents of
regular files.
E.g.
{
"version": 1,
"root": {
"type": "directory",
"entries": {
"lib": {
"type": "directory",
"entries": {
"Mcrt1.o": {
"type": "regular",
"size": 1288
},
"Scrt1.o": {
"type": "regular",
"size": 3920
},
}
}
}
...
}
}
(The actual file has no indentation.)
This is intended to speed up the NixOS channels programs index
generator [1], since fetching gazillions of large NARs from
cache.nixos.org is currently a bottleneck for updating the regular
(non-small) channel.
[1] https://github.com/NixOS/nixos-channel-scripts/blob/master/generate-programs-index.cc
We can now write
throw Error("file '%s' not found", path);
instead of
throw Error(format("file '%s' not found") % path);
and similarly
printError("file '%s' not found", path);
instead of
printMsg(lvlError, format("file '%s' not found") % path);
We were passing "p=$PATH" rather than "p=$PATH;", resulting in some
invalid shell code.
Also, construct a separate environment for the child rather than
overwriting the parent's.
The fact that queryPathInfo() is synchronous meant that we needed a
thread for every concurrent binary cache lookup, even though they end
up being handled by the same download thread. Requiring hundreds of
threads is not a good idea. So now there is an asynchronous version of
queryPathInfo() that takes a callback function to process the
result. Similarly, enqueueDownload() now takes a callback rather than
returning a future.
Thus, a command like
nix path-info --store https://cache.nixos.org/ -r /nix/store/slljrzwmpygy1daay14kjszsr9xix063-nixos-16.09beta231.dccf8c5
that returns 4941 paths now takes 1.87s using only 2 threads (the main
thread and the downloader thread). (This is with a prewarmed
CloudFront.)
It's a slight misnomer now because it actually limits *all* downloads,
not just binary cache lookups.
Also add a "enable-http2" option to allow disabling use of HTTP/2
(enabled by default).
The binary cache store can now use HTTP/2 to do lookups. This is much
more efficient than HTTP/1.1 due to multiplexing: we can issue many
requests in parallel over a single TCP connection. Thus it's no longer
necessary to use a bunch of concurrent TCP connections (25 by
default).
For example, downloading 802 .narinfo files from
https://cache.nixos.org/, using a single TCP connection, takes 11.8s
with HTTP/1.1, but only 0.61s with HTTP/2.
This did require a fairly substantial rewrite of the Downloader class
to use the curl multi interface, because otherwise curl wouldn't be
able to do multiplexing for us. As a bonus, we get connection reuse
even with HTTP/1.1. All downloads are now handled by a single worker
thread. Clients call Downloader::enqueueDownload() to tell the worker
thread to start the download, getting a std::future to the result.
This largely reverts c68e5913c7. Running
builds as root breaks "cp -p", since when running as root, "cp -p"
assumes that it can succesfully chown() files. But that's not actually
the case since the user namespace doesn't provide a complete uid
mapping. So it barfs with a fatal error message ("cp: failed to
preserve ownership for 'foo': Invalid argument").
BASH_ENV causes all non-interactive shells called via eg. /etc/bashrc to
remove the rc-file before the main shell gets to run it. Completion
scripts will often do this. Fixes#976.
Adapted from and fixes#1034.
This fixes an assertion failure in "assert(goal);" in
Worker::waitForInput() after a substitution goal is cancelled by the
termination of another goal. The problem was the line
//worker.childTerminated(shared_from_this()); // FIXME
in the SubstitutionGoal destructor. This was disabled because
shared_from_this() obviously doesn't work from a destructor. So we now
use a real pointer for object identity.
The implementation of "partition" in Nixpkgs is O(n^2) (because of the
use of ++), and for some reason was causing stack overflows in
multi-threaded evaluation (not sure why).
This reduces "nix-env -qa --drv-path" runtime by 0.197s and memory
usage by 298 MiB (in non-Boehm mode).
Normally it's impossible to take a reference to the function passed to
callFunction, so some callers (e.g. ExprApp::eval) allocate that value
on the stack. For functors, a reference to the functor itself may be
kept, so we need to have it on the heap.
Fixes#1045
The inner lambda was returning a SQLite-internal char * rather than a
std::string, leading to Hydra errors liks
Caught exception in Hydra::Controller::Root->narinfo "path âø£â is not in the Nix store at /nix/store/6mvvyb8fgwj23miyal5mdr8ik4ixk15w-hydra-0.1.1234.abcdef/libexec/hydra/lib/Hydra/Controller/Root.pm line 352."
That is, unless --file is specified, the Nix search path is
synthesized into an attribute set. Thus you can say
$ nix build nixpkgs.hello
assuming $NIX_PATH contains an entry of the form "nixpkgs=...". This
is more verbose than
$ nix build hello
but is less ambiguous.
For example, you can now say:
configureFlags = "--prefix=${placeholder "out"} --includedir=${placeholder "dev"}";
The strings returned by the ‘placeholder’ builtin are replaced at
build time by the actual store paths corresponding to the specified
outputs.
Previously, you had to work around the inability to self-reference by doing stuff like:
preConfigure = ''
configureFlags+=" --prefix $out --includedir=$dev"
'';
or rely on ad-hoc variable interpolation semantics in Autoconf or Make
(e.g. --prefix=\$(out)), which doesn't always work.
This makes it easier to create a diverted store, i.e.
NIX_REMOTE="local?root=/tmp/root"
instead of
NIX_REMOTE="local?real=/tmp/root/nix/store&state=/tmp/root/nix/var/nix" NIX_LOG_DIR=/tmp/root/nix/var/log
This fixes instantiation of pythonPackages.pytest that produces a
directory with less permissions during one of it's tests that leads to
a nix error like:
error: opening directory ‘/tmp/nix-build-python2.7-pytest-2.9.2.drv-0/pytest-of-user/pytest-0/testdir/test_cache_failure_warns0/.cache’: Permission denied
For one particular NixOS configuration, this cut the runtime of
"nix-store -r --dry-run" from 6m51s to 3.4s. It also fixes a bug in
the size calculation that was causing certain paths to be counted
twice, e.g. before:
these paths will be fetched (1249.98 MiB download, 2995.74 MiB unpacked):
and after:
these paths will be fetched (1219.56 MiB download, 2862.17 MiB unpacked):
This way, all builds appear to have a uid/gid of 0 inside the
chroot. In the future, this may allow using programs like
systemd-nspawn inside builds, but that will require assigning a larger
UID/GID map to the build.
Issue #625.
This allows an unprivileged user to perform builds on a diverted store
(i.e. where the physical store location differs from the logical
location).
Example:
$ NIX_LOG_DIR=/tmp/log NIX_REMOTE="local?real=/tmp/store&state=/tmp/var" nix-build -E \
'with import <nixpkgs> {}; runCommand "foo" { buildInputs = [procps nettools]; } "id; ps; ifconfig; echo $out > $out"'
will do a build in the Nix store physically in /tmp/store but
logically in /nix/store (and thus using substituters for the latter).
This is a convenience command to allow users who are not privileged to
create /nix/store to use Nix with regular binary caches. For example,
$ NIX_REMOTE="local?state=$HOME/nix/var&real=/$HOME/nix/store" nix run firefox bashInteractive
will download Firefox and bash from cache.nixos.org, then start a
shell in which $HOME/nix/store is mounted on /nix/store.
This is primarily to subsume the functionality of the
copy-from-other-stores substituter. For example, in the NixOS
installer, we can now do (assuming we're in the target chroot, and the
Nix store of the installation CD is bind-mounted on /tmp/nix):
$ nix-build ... --option substituters 'local?state=/tmp/nix/var&real=/tmp/nix/store'
However, unlike copy-from-other-stores, this also allows write access
to such a store. One application might be fetching substitutes for
/nix/store in a situation where the user doesn't have sufficient
privileges to create /nix, e.g.:
$ NIX_REMOTE="local?state=/home/alice/nix/var&real=/home/alice/nix/store" nix-build ...
E.g.
$ nix-build -I nixpkgs=git://github.com/NixOS/nixpkgs '<nixpkgs>' -A hello
This is not extremely useful yet because you can't specify a
branch/revision.
The function builtins.fetchgit fetches Git repositories at evaluation
time, similar to builtins.fetchTarball. (Perhaps the name should be
changed, being confusing with respect to Nixpkgs's fetchgit function,
with works at build time.)
Example:
(import (builtins.fetchgit git://github.com/NixOS/nixpkgs) {}).hello
or
(import (builtins.fetchgit {
url = git://github.com/NixOS/nixpkgs-channels;
rev = "nixos-16.03";
}) {}).hello
Note that the result does not contain a .git directory.
If --no-build-output is given (which will become the default for the
"nix" command at least), show the last 10 lines of the build output if
the build fails.
This replaces nix-push. For example,
$ nix copy --to file:///tmp/cache -r $(type -p firefox)
copies the closure of firefox to the specified binary cache. And
$ nix copy --from file:///tmp/cache --to s3://my-cache /nix/store/abcd...
copies between two binary caches.
It will also replace nix-copy-closure, once we have an SSHStore class,
e.g.
$ nix copy --from ssh://alice@machine /nix/store/abcd...
This allows commands like "nix verify --all" or "nix path-info --all"
to work on S3 caches.
Unfortunately, this requires some ugly hackery: when querying the
contents of the bucket, we don't want to have to read every .narinfo
file. But the S3 bucket keys only include the hash part of each store
path, not the name part. So as a special exception
queryAllValidPaths() can now return store paths *without* the name
part, and queryPathInfo() accepts such store paths (returning a
ValidPathInfo object containing the full name).
Caching path info is generally useful. For instance, it speeds up "nix
path-info -rS /run/current-system" (i.e. showing the closure sizes of
all paths in the closure of the current system) from 5.6s to 0.15s.
This also eliminates some APIs like Store::queryDeriver() and
Store::queryReferences().
"verify-store" is now simply an "--all" flag to "nix verify". This
flag can be used for any other store path command as well (e.g. "nix
path-info", "nix copy-sigs", ...).
For convenience, you can now say
$ nix-env -f channel:nixos-16.03 -iA hello
instead of
$ nix-env -f https://nixos.org/channels/nixos-16.03/nixexprs.tar.xz -iA hello
Similarly,
$ nix-shell -I channel:nixpkgs-unstable -p hello
$ nix-build channel:nixos-15.09 -A hello
Abstracting over the NixOS/Nixpkgs channels location also allows us to
use a more efficient transport (e.g. Git) in the future.
Thus, -I / $NIX_PATH entries are now downloaded only when they are
needed for evaluation. An error to download an entry is a non-fatal
warning (just like non-existant paths).
This does change the semantics of builtins.nixPath, which now returns
the original, rather than resulting path. E.g., before we had
[ { path = "/nix/store/hgm3yxf1lrrwa3z14zpqaj5p9vs0qklk-nixexprs.tar.xz"; prefix = "nixpkgs"; } ... ]
but now
[ { path = "https://nixos.org/channels/nixos-16.03/nixexprs.tar.xz"; prefix = "nixpkgs"; } ... ]
Fixes#792.
This specifies the number of distinct signatures required to consider
each path "trusted".
Also renamed ‘--no-sigs’ to ‘--no-trust’ for the flag that disables
verifying whether a path is trusted (since a path can also be trusted
if it has no signatures, but was built locally).
These are content-addressed paths or outputs of locally performed
builds. They are trusted even if they don't have signatures, so "nix
verify-paths" won't complain about them.
Typical usage is to check local paths using the signatures from a
binary cache:
$ nix verify-paths -r /run/current-system -s https://cache.nixos.org
path ‘/nix/store/c1k4zqfb74wba5sn4yflb044gvap0x6k-nixos-system-mandark-16.03.git.fc2d7a5M’ is untrusted
...
checked 844 paths, 119 untrusted
The flag remembering whether an Interrupted exception was thrown is
now thread-local. Thus, all threads will (eventually) throw
Interrupted. Previously, one thread would throw Interrupted, and then
the other threads wouldn't see that they were supposed to quit.
Unlike "nix-store --verify-path", this command verifies signatures in
addition to store path contents, is multi-threaded (especially useful
when verifying binary caches), and has a progress indicator.
Example use:
$ nix verify-paths --store https://cache.nixos.org -r $(type -p thunderbird)
...
[17/132 checked] checking ‘/nix/store/rawakphadqrqxr6zri2rmnxh03gqkrl3-autogen-5.18.6’
Doing a chdir() is a bad idea in multi-threaded programs, leading to
failures such as
error: cannot connect to daemon at ‘/nix/var/nix/daemon-socket/socket’: No such file or directory
Since Linux doesn't have a connectat() syscall like FreeBSD, there is
no way we can support this in a race-free way.
This enables an optimisation in hydra-queue-runner, preventing a
download of a NAR it just uploaded to the cache when reading files
like hydra-build-products.
This enables an optimisation in hydra-queue-runner, preventing a
download of a NAR it just uploaded to the cache when reading files
like hydra-build-products.
For example,
$ NIX_REMOTE=file:///my-cache nix ls-store -lR /nix/store/f4kbgl8shhyy76rkk3nbxr0lz8d2ip7q-binutils-2.23.1
dr-xr-xr-x 0 ./bin
-r-xr-xr-x 30748 ./bin/addr2line
-r-xr-xr-x 66973 ./bin/ar
...
Similarly, "nix ls-nar" lists the contents of a NAR file, "nix
cat-nar" extracts a file from a NAR file, and "nix cat-store" extract
a file from a Nix store.
This allows a RemoteStore object to be used safely from multiple
threads concurrently. It will make multiple daemon connections if
necessary.
Note: pool.hh and sync.hh have been copied from the Hydra source tree.
This is currently only used by the Hydra queue runner rework, but like
eff5021eaa it presumably will be useful
for the C++ rewrite of nix-push and
download-from-binary-cache. (@shlevy)
Also, move a few free-standing functions into StoreAPI and Derivation.
Also, introduce a non-nullable smart pointer, ref<T>, which is just a
wrapper around std::shared_ptr ensuring that the pointer is never
null. (For reference-counted values, this is better than passing a
"T&", because the latter doesn't maintain the refcount. Usually, the
caller will have a shared_ptr keeping the value alive, but that's not
always the case, e.g., when passing a reference to a std::thread via
std::bind.)
For example,
$ nix-build --hash -A nix-repl.src
will build the fixed-output derivation nix-repl.src (a fetchFromGitHub
call), but instead of *verifying* the hash given in the Nix
expression, it prints out the resulting hash, and then moves the
result to its content-addressed location in the Nix store. E.g
build produced path ‘/nix/store/504a4k6zi69dq0yjc0bm12pa65bccxam-nix-repl-8a2f5f0607540ffe56b56d52db544373e1efb980-src’ with sha256 hash ‘0cjablz01i0g9smnavhf86imwx1f9mnh5flax75i615ml71gsr88’
The goal of this is to make all nix-prefetch-* scripts unnecessary: we
can just let Nix run the real thing (i.e., the corresponding fetch*
derivation).
Another example:
$ nix-build --hash -E 'with import <nixpkgs> {}; fetchgit { url = "https://github.com/NixOS/nix.git"; sha256 = "ffffffffffffffffffffffffffffffffffffffffffffffffffff"; }'
...
git revision is 9e7c1a4bbd
...
build produced path ‘/nix/store/gmsnh9i7x4mb7pyd2ns7n3c9l90jfsi1-nix’ with sha256 hash ‘1188xb621diw89n25rifqg9lxnzpz7nj5bfh4i1y3dnis0dmc0zp’
(Having to specify a fake sha256 hash is a bit annoying...)
Previously files in the Nix store were owned by root or by nixbld,
depending on whether they were created by a substituter or by a
builder. This doesn't matter much, but causes spurious diffoscope
differences. So use root everywhere.
E.g.
$ nix-build pkgs/stdenv/linux/ -A stage1.pkgs.perl --check
nix-store: src/libstore/build.cc:1323: void nix::DerivationGoal::tryToBuild(): Assertion `buildMode != bmCheck || validPaths.size() == drv->outputs.size()' failed.
when perl.out exists but perl.man doesn't. The fix is to only check
the outputs that exist. Note that "nix-build -A stage1.pkgs.all
--check" will still give a (proper) error in this case.
This was observed in the deb_debian7x86_64 build:
http://hydra.nixos.org/build/29973215
Calling c_str() on a temporary should be fine because the temporary
shouldn't be destroyed until after the execl() call, but who knows...
If repair found a corrupted/missing path that depended on a
multiple-output derivation, and some of the outputs of the latter were
not present, it failed with a message like
error: path ‘/nix/store/cnfn9d5fjys1y93cz9shld2xwaibd7nn-bash-4.3-p42-doc’ is not valid
Also show types when nix cannot compare values of different types.
This is also more consistent since types are already shown when comparing values of the same not comparable type.
For example, "${{ foo = "bar"; __toString = x: x.foo; }}" evaluates
to "bar".
With this, we can delay calling functions like mkDerivation,
buildPythonPackage, etc. until we actually need a derivation, enabling
overrides and other modifications to happen by simple attribute set
update.
This makes Darwin consistent with Linux: Nix expressions can't break
out of the sandbox unless relaxed sandbox mode is enabled.
For the normal sandbox mode this will require fixing #759 however.
Otherwise, since the call to write a "d" character to the lock file
can fail with ENOSPC, we can get an unhandled exception resulting in a
call to terminate().
Caused by 8063fc497a. If tmpDir !=
tmpDirInSandbox (typically when there are multiple concurrent builds
with the same name), the *Path attribute would not point to an
existing file. This caused Nixpkgs' writeTextFile to write an empty
file. In particular this showed up as hanging VM builds (because it
would run an empty run-nixos-vm script and then wait for it to finish
booting).
This is arguably nitpicky, but I think this new formulation is even
clearer. My thinking is that it's easier to comprehend when the
calculated hash value is displayed close to the output path. (I think it
is somewhat similar to eliminating double negatives in logic
statements.)
The formulation is inspired / copied from the OpenEmbedded build tool,
bitbake.
Rather than using $<host-TMPDIR>/nix-build-<drvname>-<number>, the
temporary directory is now always /tmp/nix-build-<drvname>-0. This
improves bitwise-exact reproducibility for builds that store $TMPDIR
in their build output. (Of course, those should still be fixed...)
edolstra:
“…since callers of readDirectory have to handle the possibility of
DT_UNKNOWN anyway, and we don't want to do a stat call for every
directory entry unless it's really needed.”
The nixpkgs manual prescribes the use of values from stdenv.lib.licenses
for the meta.license attribute. Those values are attribute sets and
currently skipped when running nix-env with '--xml --meta'. This has the
consequence that also nixpkgs-lint will report missing licenses.
With this commit nix-env with '--xml --meta' will print all attributes
of an attribute set that are of type tString. For example the output for
the package nixpkgs.hello is
<meta name="license" type="strings">
<string type="url" value="http://spdx.org/licenses/GPL-3.0+" />
<string type="shortName" value="gpl3Plus" />
<string type="fullName" value="GNU General Public License v3.0 or later" />
<string type="spdxId" value="GPL-3.0+" />
</meta>
This commit fixes nixpkgs-lint, too.
Temporarily allow derivations to describe their full sandbox profile.
This will be eventually scaled back to a more secure setup, see the
discussion at #695
Nix reports a hash mismatch saying:
output path ‘foo’ should have sha256 hash ‘abc’, instead has ‘xyz’
That message is slightly ambiguous and some people read that statement
to mean the exact opposite of what it is supposed to mean. After this
patch, the message will be:
Nix expects output path ‘foo’ to have sha256 hash ‘abc’, instead it has ‘xyz’
- rename options but leav old names as lower-priority aliases,
also "-dirs" -> "-paths" to get closer to the meaning
- update docs to reflect the new names (old aliases are not documented),
including a new file with release notes
- tests need an update after corresponding changes to nixpkgs
- __noChroot is left as it is (after discussion on the PR)
Passing "--option build-repeat <N>" will cause every build to be
repeated N times. If the build output differs between any round, the
build is rejected, and the output paths are not registered as
valid. This is primarily useful to verify build determinism. (We
already had a --check option to repeat a previously succeeded
build. However, with --check, non-deterministic builds are registered
in the DB. Preventing that is useful for Hydra to ensure that
non-deterministic builds don't end up getting published at all.)
This reverts commit 79ca503332. Ouch,
never noticed this. We definitely don't want to allow builds to have
arbitrary access to /bin and /usr/bin, because then they can (for
instance) bring in a bunch of setuid programs. Also, we shouldn't be
encouraging the use of impurities in the default configuration.
If automatic store optimisation is enabled, and a hard-linked file in
the store gets corrupted, then the corresponding .links entry will
also be corrupted. In that case, trying to repair with --repair or
--repair-path won't work, because the new "good" file will be replaced
by a hard link to the corrupted file. We can catch most of these cases
by doing a sanity-check on the file sizes.
> I made this change for two reasons:
> 1. Darwin's locale data doesn't appear to be open source
> 2. Privileged processes will always use /usr/share/locale regardless of environment variables
This removes the need to have multiple downloads in the stdenv
bootstrap process (like a separate busybox binary for Linux, or
curl/mkdir/sh/bzip2 for Darwin). Now all those files can be combined
into a single NAR.
This makes it consistent with the Nixpkgs fetchurl and makes it work
in chroots. We don't need verification because the hash of the result
is checked anyway.
The stack allocated for the builder was way too small (32 KB). This is
sufficient for normal derivations, because they just do some setup and
then exec() the actual builder. But for the fetchurl builtin
derivation it's not enough. Also, allocating the stack on the caller's
stack was fishy business.
This allows overriding the name component of the resulting Nix store
path, which is necessary if the base name of the URI contains
"illegal" characters.
This is in particular useful for fetchFromGitHub et al., ensuring that
the store path produced by nix-prefetch-url corresponds to what those
functions expect.
This allows nix-prefetch-url to prefetch the output of fetchzip and
its wrappers (like fetchFromGitHub). For example:
$ nix-prefetch-url --unpack https://github.com/NixOS/patchelf/archive/0.8.tar.gz
or from a Nix expression:
$ nix-prefetch-url -A nix-repl.src
In the latter case, --unpack can be omitted because nix-repl.src is a
fetchFromGitHub derivation and thus has "outputHashMode" set to
"recursive".
Some evidence that defining it to be 0 is right:
* OS X headers define it to be 0.
* Other code uses 0 instead of SOL_LOCAL to check for peer credentials
(e.g. FreeBSD's implementation of getpeereid).
Previously, pkg-config was already queried for libsqlite3's and
libcurl's link flags. However they were not used, but hardcoded
instead. This commit replaces the hardcoded LDFLAGS by the ones
provided by pkg-config in a similar pattern as already used for
libsodium.
For example,
$ nix-prefetch-url -A hello.src
will prefetch the file specified by the fetchurl call in the attribute
‘hello.src’ from the Nix expression in the current directory. This
differs from ‘nix-build -A hello.src’ in that it doesn't verify the
hash.
You can also specify a path to the Nix expression:
$ nix-prefetch-url ~/Dev/nixpkgs -A hello.src
List elements (typically used in ‘patches’ attributes) also work:
$ nix-prefetch-url -A portmidi.patches.0
