In structured-attributes derivations, you can now specify per-output
checks such as:
outputChecks."out" = {
# The closure of 'out' must not be larger than 256 MiB.
maxClosureSize = 256 * 1024 * 1024;
# It must not refer to C compiler or to the 'dev' output.
disallowedRequisites = [ stdenv.cc "dev" ];
};
outputChecks."dev" = {
# The 'dev' output must not be larger than 128 KiB.
maxSize = 128 * 1024;
};
Also fixed a bug in allowedRequisites that caused it to ignore
self-references.
The current usage technically works by putting multiple different
repos in to the same git directory. However, it is very slow as
Git tries very hard to find common commits between the two
repositories. If the two repositories are large (like Nixpkgs and
another long-running project,) it is maddeningly slow.
This change busts the cache for existing deployments, but users
will be promptly repaid in per-repository performance.
In EvalState::checkSourcePath, the path is checked against the list of
allowed paths first and later it's checked again *after* resolving
symlinks.
The resolving of the symlinks is done via canonPath, which also strips
out "../" and "./". However after the canonicalisation the error message
pointing out that the path is not allowed prints the symlink target in
the error message.
Even if we'd suppress the message, symlink targets could still be leaked
if the symlink target doesn't exist (in this case the error is thrown in
canonPath).
So instead, we now do canonPath() without symlink resolving first before
even checking against the list of allowed paths and then later do the
symlink resolving and checking the allowed paths again.
The first call to canonPath() should get rid of all the "../" and "./",
so in theory the only way to leak a symlink if the attacker is able to
put a symlink in one of the paths allowed by restricted evaluation mode.
For the latter I don't think this is part of the threat model, because
if the attacker can write to that path, the attack vector is even
larger.
Signed-off-by: aszlig <aszlig@nix.build>
Allow global config settings to be defined in multiple Config
classes. For example, this means that libutil can have settings and
evaluator settings can be moved out of libstore. The Config classes
are registered in a new GlobalConfig class to which config files
etc. are applied.
Relevant to https://github.com/NixOS/nix/issues/2009 in that it
removes the need for ad hoc handling of useCaseHack, which was the
underlying cause of that issue.
Flex's regexes have an annoying feature: the dot matches everything
except a newline. This causes problems for expressions like:
"${0}\
"
where the backslash-newline combination matches this rule instead of the
intended one mentioned in the comment:
<STRING>\$|\\|\$\\ {
/* This can only occur when we reach EOF, otherwise the above
(...|\$[^\{\"\\]|\\.|\$\\.)+ would have triggered.
This is technically invalid, but we leave the problem to the
parser who fails with exact location. */
return STR;
}
However, the parser actually accepts the resulting token sequence
('"' DOLLAR_CURLY 0 '}' STR '"'), which is a problem because the lexer
rule didn't assign anything to yylval. Ultimately this leads to a crash
when dereferencing a NULL pointer in ExprConcatStrings::bindVars().
The fix does change the syntax of the language in some corner cases
but I think it's only turning previously invalid (or crashing) syntax
to valid syntax. E.g.
"a\
b"
and
''a''\
b''
were previously syntax errors but now both result in "a\nb".
Found by afl-fuzz.
Otherwise, running e.g.
nix-instantiate --eval -E --strict 'builtins.replaceStrings [""] ["X"] "abc"'
would just hang in an infinite loop.
Found by afl-fuzz.
First attempt of this was reverted in e2d71bd186 because it caused
another infinite loop, which is fixed now and a test added.
Otherwise, running e.g.
nix-instantiate --eval -E --strict 'builtins.replaceStrings [""] ["X"] "abc"'
would just hang in an infinite loop.
Found by afl-fuzz.
nix-store --export, nix-store --dump, and nix dump-path would previously
fail silently if writing the data out failed, because
a) FdSink::write ignored exceptions, and
b) the commands relied on FdSink's destructor, which ignores
exceptions, to flush the data out.
This could cause rather opaque issues with installing nixos, because
nix-store --export would happily proceed even if it couldn't write its
data out (e.g. if nix-store --import on the other side of the pipe
failed).
This commit adds tests that expose these issues in the nix-store
commands, and fixes them for all three.
All ANSI sequences except color setting are now filtered out. In
particular, terminal resets (such as from NixOS VM tests) are filtered
out.
Also, fix the completely broken tab character handling.
builtins.path allows specifying the name of a path (which makes paths
with store-illegal names now addable), allows adding paths with flat
instead of recursive hashes, allows specifying a filter (so is a
generalization of filterSource), and allows specifying an expected
hash (enabling safe path adding in pure mode).
Instead, if a fixed-output derivation produces has an incorrect output
hash, we now unconditionally move the outputs to the path
corresponding with the actual hash and register it as valid. Thus,
after correcting the hash in the Nix expression (e.g. in a fetchurl
call), the fixed-output derivation doesn't have to be built again.
It would still be good to have a command for reporting the actual hash
of a fixed-output derivation (instead of throwing an error), but
"nix-build --hash" didn't do that.
In this mode, the following restrictions apply:
* The builtins currentTime, currentSystem and storePath throw an
error.
* $NIX_PATH and -I are ignored.
* fetchGit and fetchMercurial require a revision hash.
* fetchurl and fetchTarball require a sha256 attribute.
* No file system access is allowed outside of the paths returned by
fetch{Git,Mercurial,url,Tarball}. Thus 'nix build -f ./foo.nix' is
not allowed.
Thus, the evaluation result is completely reproducible from the
command line arguments. E.g.
nix build --pure-eval '(
let
nix = fetchGit { url = https://github.com/NixOS/nixpkgs.git; rev = "9c927de4b179a6dd210dd88d34bda8af4b575680"; };
nixpkgs = fetchGit { url = https://github.com/NixOS/nixpkgs.git; ref = "release-17.09"; rev = "66b4de79e3841530e6d9c6baf98702aa1f7124e4"; };
in (import (nix + "/release.nix") { inherit nix nixpkgs; }).build.x86_64-linux
)'
The goal is to enable completely reproducible and traceable
evaluation. For example, a NixOS configuration could be fully
described by a single Git commit hash. 'nixos-rebuild' would do
something like
nix build --pure-eval '(
(import (fetchGit { url = file:///my-nixos-config; rev = "..."; })).system
')
where the Git repository /my-nixos-config would use further fetchGit
calls or Git externals to fetch Nixpkgs and whatever other
dependencies it has. Either way, the commit hash would uniquely
identify the NixOS configuration and allow it to reproduced.
Disable various tests if the kernel doesn't support unprivileged user
namespaces (e.g. Arch Linux disables them) or disable them via a sysctl
(Debian, Ubuntu).
Fixes#1521Fixes#1625
* Look for both 'brotli' and 'bro' as external command,
since upstream has renamed it in newer versions.
If neither are found, current runtime behavior
is preserved: try to find 'bro' on PATH.
* Limit amount handed to BrotliEncoderCompressStream
to ensure interrupts are processed in a timely manner.
Testing shows negligible performance impact.
(Other compression sinks don't seem to require this)
The storeUri variable in the build-remote hook is declared very much to
the start of the main function and a bunch of lines later, the same
variable gets checked via hasPrefix() but it gets assigned *after* that
check when the most suitable machine for the build was choosen.
So I guess this was just a typo in d16fd24973
and what we really want is to either checkd the prefix *after* assigning
storeUri or use bestMachine->storeUri directly.
I choose the latter, because the former could introduce even more
regressions if the try block where the variable gets assigned terminates
early.
Nevertheless, the reason why the log output didn't work is because
hasPrefix() checked for "ssh://" in front of storeUri, but if the
storeUri isn't set correctly (or at all), we don't get the log file
descriptor set up properly, leading to no log output.
I've adjusted the remote-builds test to include a regression test for
this, so that we can make sure we get a build output when using remote
builds.
In addition to that I've tested this with two of my build farms and the
build logs are emitted correctly again.
Signed-off-by: aszlig <aszlig@nix.build>
The name had become a misnomer since it's not only for substitution
from binary caches, but when adding/copying any
(non-content-addressed) path to a store.
