This is already used by Hydra, and is very useful when materializing
a remote builder list from service discovery. This allows the service
discovery tool to only sync one file instead of two.
This is technically a breaking change, since attempting to set plugin
files after the first non-flag argument will now throw an error. This
is acceptable given the relative lack of stability in a plugin
interface and the need to tie the knot somewhere once plugins can
actually define new subcommands.
This field used to be a `BasicDerivation`, but this `BasicDerivation`
was downcasted to a `Derivation` when needed (implicitely or not), so we
might as well make it a full `Derivation` and upcast it when needed.
This also allows getting rid of a weird duplication in the way we
compute the static output hashes for the derivation. We had to
do it differently and in a different place depending on whether the
derivation was a full derivation or just a basic drv, but we can now do
it unconditionally on the full derivation.
Fix#4559
- Pass it the name of the outputs rather than their output paths (as
these don't exist for ca derivations)
- Get the built output paths from the remote builder
- Register the new received realisations
The PR #4240 changed messag of the error that was thrown when an auto-called
function was missing an argument.
However this change also changed the type of the error, from `EvalError`
to a new `MissingArgumentError`. This broke hydra which was relying on
an `EvalError` being thrown.
Make `MissingArgumentError` a subclass of `EvalError` to un-break hydra.
When performing distributed builds of machine learning packages, it
would be nice if builders without the required SIMD instructions can
be excluded as build nodes.
Since x86_64 has accumulated a large number of different instruction
set extensions, listing all possible extensions would be unwieldy.
AMD, Intel, Red Hat, and SUSE have recently defined four different
microarchitecture levels that are now part of the x86-64 psABI
supplement and will be used in glibc 2.33:
https://gitlab.com/x86-psABIs/x86-64-ABIhttps://lwn.net/Articles/844831/
This change uses libcpuid to detect CPU features and then uses them to
add the supported x86_64 levels to the additional system types. For
example on a Ryzen 3700X:
$ ~/aps/bin/nix -vv --version | grep "Additional system"
Additional system types: i686-linux, x86_64-v1-linux, x86_64-v2-linux, x86_64-v3-linux
That way we
1. Don't have to recompute them several times
2. Can compute them in a place where we know the type of the parent
derivation, meaning that we don't need the casting dance we had before
Once a build is done, get back to the original derivation, and register
all the newly built outputs for this derivation.
This allows Nix to work properly with derivations that don't have all
their build inputs available − thus allowing garbage collection and
(once it's implemented) binary substitution
Change the `nix-build` logic for linking/printing the output paths to allow for
some outputs to be missing. This might happen when the toplevel
derivation didn't have to be built, either because all the required
outputs were already there, or because they have all been substituted.
I tested a trivial program that called kill(-1, SIGKILL), which was
run as the only process for an unpriveleged user, on Linux and
FreeBSD. On Linux, kill reported success, while on FreeBSD it failed
with EPERM.
POSIX says:
> If pid is -1, sig shall be sent to all processes (excluding an
> unspecified set of system processes) for which the process has
> permission to send that signal.
and
> The kill() function is successful if the process has permission to
> send sig to any of the processes specified by pid. If kill() fails,
> no signal shall be sent.
and
> [EPERM]
> The process does not have permission to send the signal to any
> receiving process.
My reading of this is that kill(-1, ...) may fail with EPERM when
there are no other processes to kill (since the current process is
ignored). Since kill(-1, ...) only attempts to kill processes the
user has permission to kill, it can't mean that we tried to do
something we didn't have permission to kill, so it should be fine to
interpret EPERM the same as success here for any POSIX-compliant
system.
This fixes an issue that Mic92 encountered[1] when he tried to review a
Nixpkgs PR on FreeBSD.
[1]: https://github.com/NixOS/nixpkgs/pull/81459#issuecomment-606073668
We upgrade to lowdown 0.8.0 [1] which contains a fix/improvement to a
behavior mentioned in this issue thread [2] where a big part of
lowdown's API would just call exit(1) on allocation errors since that
is a satisfying behavior for the lowdown binary.
Now lowdown_term_rndr returns 0 if an allocation error occurred which we
check for in libcmd/markdown.cc.
Also the extern "C" { } wrapper around lowdown.h has been removed as it
is not necessary.
[1]: 6ca7c855a0/versions.xml (L987-L1006)
[2]: https://github.com/kristapsdz/lowdown/issues/45#issuecomment-756681153
In addition to being some ugly template trickery, it was also totally
useless as it was used in only one place where I could replace it by
just a few extra characters
This makes nix search always go through the first level of an
attribute set, even if it's not a top level attribute. For instance,
you can now list all GHC compilers with:
$ nix search nixpkgs#haskell.compiler
...
This is similar to how nix-env works when you pass in -A.
This fixes an issue where derivations with a primary output that is
not "out" would fail with:
$ nix profile install nixpkgs#sqlite
error: opening directory '/nix/store/2a2ydlgyydly5czcc8lg12n6qqkfz863-sqlite-3.34.1-bin': No such file or directory
This happens because while derivations produce every output when
built, you might not have them if you didn't build the derivation
yourself (for instance, the store path was fetch from a binary cache).
This uses outputName provided from DerivationInfo which appears to
match the first output of the derivation.
Where a `RealisedPath` is a store path with its history, meaning either
an opaque path for stuff that has been directly added to the store, or a
`Realisation` for stuff that has been built by a derivation
This is a low-level refactoring that doesn't bring anything by itself
(except a few dozen extra lines of code :/ ), but raising the
abstraction level a bit is important on a number of levels:
- Commands like `nix build` have to query for the realisations after the
build is finished which is fragile (see
27905f12e4a7207450abe37c9ed78e31603b67e1 for example). Having them
oprate directly at the realisation level would avoid that
- Others like `nix copy` currently operate directly on (built) store
paths, but need a bit more information as they will need to register
the realisations on the remote side
Example:
error: builder for '/nix/store/9ysqfidhipyzfiy54mh77iqn29j6cpsb-failing.drv' failed with exit code 1;
last 1 log lines:
> FAIL
For full logs, run 'nix log /nix/store/9ysqfidhipyzfiy54mh77iqn29j6cpsb-failing.drv'.
… while importing '/nix/store/pfp4a4bjh642ylxyipncqs03z6kkgfvy-failing'
at /nix/store/25wgzr2qrqqiqfbdb1chpiry221cjglc-source/flake.nix:58:15:
57|
58| ifd = import self.hydraJobs.broken;
| ^
59|
Fix a mismatch in the errors thrown when a needed output was missing
from an input derivation that was leading to a wrong and quite misleading error
message
Don't only show the name of the output, but also the derivation to which
this output belongs (as otherwise it's very hard to track back what went
wrong)
It's now
at /home/eelco/Dev/nixpkgs/pkgs/applications/misc/hello/default.nix:7:7:
instead of
at: (7:7) in file: /home/eelco/Dev/nixpkgs/pkgs/applications/misc/hello/default.nix
The new format is more standard and clickable.
Changes:
* The divider lines are gone. These were in practice a bit confusing,
in particular with --show-trace or --keep-going, since then there
were multiple lines, suggesting a start/end which wasn't the case.
* Instead, multi-line error messages are now indented to align with
the prefix (e.g. "error: ").
* The 'description' field is gone since we weren't really using it.
* 'hint' is renamed to 'msg' since it really wasn't a hint.
* The error is now printed *before* the location info.
* The 'name' field is no longer printed since most of the time it
wasn't very useful since it was just the name of the exception (like
EvalError). Ideally in the future this would be a unique, easily
googleable error ID (like rustc).
* "trace:" is now just "…". This assumes error contexts start with
something like "while doing X".
Example before:
error: --- AssertionError ---------------------------------------------------------------------------------------- nix
at: (7:7) in file: /home/eelco/Dev/nixpkgs/pkgs/applications/misc/hello/default.nix
6|
7| x = assert false; 1;
| ^
8|
assertion 'false' failed
----------------------------------------------------- show-trace -----------------------------------------------------
trace: while evaluating the attribute 'x' of the derivation 'hello-2.10'
at: (192:11) in file: /home/eelco/Dev/nixpkgs/pkgs/stdenv/generic/make-derivation.nix
191| // (lib.optionalAttrs (!(attrs ? name) && attrs ? pname && attrs ? version)) {
192| name = "${attrs.pname}-${attrs.version}";
| ^
193| } // (lib.optionalAttrs (stdenv.hostPlatform != stdenv.buildPlatform && !dontAddHostSuffix && (attrs ? name || (attrs ? pname && attrs ? version)))) {
Example after:
error: assertion 'false' failed
at: (7:7) in file: /home/eelco/Dev/nixpkgs/pkgs/applications/misc/hello/default.nix
6|
7| x = assert false; 1;
| ^
8|
… while evaluating the attribute 'x' of the derivation 'hello-2.10'
at: (192:11) in file: /home/eelco/Dev/nixpkgs/pkgs/stdenv/generic/make-derivation.nix
191| // (lib.optionalAttrs (!(attrs ? name) && attrs ? pname && attrs ? version)) {
192| name = "${attrs.pname}-${attrs.version}";
| ^
193| } // (lib.optionalAttrs (stdenv.hostPlatform != stdenv.buildPlatform && !dontAddHostSuffix && (attrs ? name || (attrs ? pname && attrs ? version)))) {
This change is to simplify [Trustix](https://github.com/tweag/trustix) indexing and makes it possible to reconstruct this URL regardless of the compression used.
In particular this means that 7c2e9ca597/contrib/nix/nar/nar.go (L61-L71) can be removed and only the bits that are required to establish trust needs to be published in the Trustix build logs.
With the `ca-derivation` experimental features, non-ca derivations used
to have their output paths returned as unknown as long as they weren't
built (because of a mistake in the code that systematically erased the
previous value)
Thanks @regnat and @edolstra for catching this and comming up with the
solution.
They way I had generalized those is wrong, because local settings for
non-local stores is confusing default. And due to the nature of C++
inheritance, fixing the defaults is more annoying than it should be.
Additionally, I thought we might just drop the check in the substitution
logic since `Store::addToStore` is now streaming, but @regnat rightfully
pointed out that as it downloads dependencies first, that would still be
too late, and also waste effort on possibly unneeded/unwanted
dependencies.
The simple and correct thing to do is just make a store method for the
boolean logic, keeping all the setting and key stuff the way it was
before. That new method is both used by `LocalStore::addToStore` and the
substitution goal check. Perhaps we might eventually make it fancier,
e.g. sending the ValidPathInfo to remote stores for them to validate,
but this is good enough for now.
By default, once you enter x86_64 Rosetta 2, macOS will try to run
everything in x86_64. So an x86_64 Nix will still try to use x86_64
even when system = aarch64-darwin. To avoid this we can set
kern.curproc_arch_affinity sysctl. With kern.curproc_arch_affinity=0,
we ignore this preference.
This is based on how
https://opensource.apple.com/source/system_cmds/system_cmds-880.40.5/arch.tproj/arch.c.auto.html
works. Completely undocumented, but seems to work!
Note, you can verify this works with this impure Nix expression:
```
{
a = derivation {
name = "a";
system = "aarch64-darwin";
builder = "/bin/sh";
args = [ "-e" (builtins.toFile "builder" ''
[ "$(/usr/bin/arch)" = arm64 ]
[ "$(/usr/bin/arch -arch x86_64 /bin/sh -c /usr/bin/arch)" = i386 ]
[ "$(/usr/bin/arch -arch arm64 /bin/sh -c /usr/bin/arch)" = arm64 ]
/usr/bin/touch $out
'') ];
};
b = derivation {
name = "b";
system = "x86_64-darwin";
builder = "/bin/sh";
args = [ "-e" (builtins.toFile "builder" ''
[ "$(/usr/bin/arch)" = i386 ]
[ "$(/usr/bin/arch -arch x86_64 /bin/sh -c /usr/bin/arch)" = i386 ]
[ "$(/usr/bin/arch -arch arm64 /bin/sh -c /usr/bin/arch)" = arm64 ]
/usr/bin/touch $out
'') ];
};
}
```
This resolves#3810 by changing the behavior of `max-jobs = 0`, so
that specifying the option also avoids local building of derivations
with the attribute `preferLocalBuild = true`.
It appears as through the fetch attribute, which
is simply a variant with 3 elements, implicitly
converts boolean arguments to integers. One must
use Explicit<bool> to correctly populate it with
a boolean. This was missing from the implementation,
and resulted in clearly boolean JSON fields being
treated as numbers.
libc++10 seems to be stricter on what it allows in variant conversion.
I'm not sure what the rules are here, but this is the minimal change
needed to get through the compilation errors.
