This reduces memory consumption of
nix copy --from file://... --to ~/my-nix /nix/store/95cwv4q54dc6giaqv6q6p4r02ia2km35-blender-2.79
from 514 MiB to 18 MiB for an uncompressed binary cache, and from 192
MiB to 53 MiB for a bzipped binary cache. It may also be faster
because fetching can happen concurrently with decompression/writing.
Continuation of 48662d151b.
Issue https://github.com/NixOS/nix/issues/1681.
Allow global config settings to be defined in multiple Config
classes. For example, this means that libutil can have settings and
evaluator settings can be moved out of libstore. The Config classes
are registered in a new GlobalConfig class to which config files
etc. are applied.
Relevant to https://github.com/NixOS/nix/issues/2009 in that it
removes the need for ad hoc handling of useCaseHack, which was the
underlying cause of that issue.
Continuation of 97002b684c. This makes
the daemon use constant memory. For example, it reduces the daemon's
maximum RSS on
$ nix copy --from ~/my-nix --to daemon /nix/store/1n7x0yv8vq6zi90hfmian84vdhd04bgp-blender-2.79a
from 264 MiB to 7 MiB.
We now use a TunnelSource to prevent the connection from ending up in
an undefined state if an exception is thrown while the NAR is being
sent.
Issue https://github.com/NixOS/nix/issues/1681.
Don't bind-mount these to themselves,
mount them into the chroot directory.
Fixes pty issues when using sandbox on CentOS 7.4.
(build of perlPackages.IOTty fails before this change)
Fixes
error: getting status of '/nix/store/j8p0vv89k1pf0cn7kmfsdcs7bshwga1i-firefox-52.7.2esr/share/icons/hicolor/48x48/apps/firefox.png': No such file or directory
https://github.com/NixOS/nix/issues/1934
Also improve error message on directory/non-directory collisions.
For instance, this reduced the memory consumption of
$ nix copy --from ssh://localhost --to ~/my-nix /nix/store/1n7x0yv8vq6zi90hfmian84vdhd04bgp-blender-2.79a
from 632 MiB to 16 MiB.
E.g.
cannot build on 'ssh://mac1': cannot connect to 'mac1': bash: nix-store: command not found
cannot build on 'ssh://mac2': cannot connect to 'mac2': Host key verification failed.
cannot build on 'ssh://mac3': cannot connect to 'mac3': Received disconnect from 213... port 6001:2: Too many authentication failures
Authentication failed.
copyStorePath() now pipes the output of srcStore->narFromPath()
directly into dstStore->addToStore(). The sink used by the former is
converted into a source usable by the latter using
boost::coroutine2. This is based on [1].
This reduces the maximum resident size of
$ nix build --store ~/my-nix/ /nix/store/b0zlxla7dmy1iwc3g459rjznx59797xy-binutils-2.28.1 --substituters file:///tmp/binary-cache-xz/ --no-require-sigs
from 418592 KiB to 53416 KiB. (The previous commit also reduced the
runtime from ~4.2s to ~3.4s, not sure why.) A further improvement will
be to download files into a Sink.
[1] https://github.com/NixOS/nix/compare/master...Mathnerd314:dump-fix-coroutine#diff-dcbcac55a634031f9cc73707da6e4b18
Issue #1969.
This can be iterated on and currently leaves out settings we know we
want to forward, but it fixes#1713 and fixes#1935 and isn't
fundamentally broken like the status quo. Future changes are suggested
in a comment.
This allows building armv[67]l-linux derivations on compatible aarch64
machines. Failure to add the architecture may result from missing
hardware support, in which case we can't run 32-bit binaries and don't
need to restrict them with seccomp anyway,
This allows specifying additional systems that a machine is able to
build for. This may apply on some armv7-capable aarch64 processors, or
on systems using qemu-user with binfmt-misc to support transparent
execution of foreign-arch programs.
This removes the previous hard-coded assumptions about which systems are
ABI-compatible with which other systems, and instead relies on the user
to specify any additional platforms that they have ensured compatibility
for and wish to build for locally.
NixOS should probably add i686-linux on x86_64-linux systems for this
setting by default.
The overhead of sandbox builds is a problem on NixOS (since building a
NixOS configuration involves a lot of small derivations) but not for
typical non-NixOS use cases. So outside of NixOS we can enable it.
Issue #179.
Previously, this would fail at startup for non-NixOS installs:
nix-env --help
The fix for this is to just use "nixManDir" as the value for MANPATH
when spawning "man".
To test this, I’m using the following:
$ nix-build release.nix -A build
$ MANPATH= ./result/bin/nix-env --help
Fixes#1627
This was caused by derivations with 'allowSubstitutes = false'. Such
derivations will be built locally. However, if there is another
SubstitionGoal that has the output of the first derivation in its
closure, then the path will be simultaneously built and substituted.
There was a check to catch this situation (via pathIsLockedByMe()),
but it no longer worked reliably because substitutions are now done in
another thread. (Thus the comment 'It can't happen between here and
the lockPaths() call below because we're not allowing multi-threading'
was no longer valid.)
The fix is to handle the path already being locked in both
SubstitutionGoal and DerivationGoal.
All ANSI sequences except color setting are now filtered out. In
particular, terminal resets (such as from NixOS VM tests) are filtered
out.
Also, fix the completely broken tab character handling.
builtins.path allows specifying the name of a path (which makes paths
with store-illegal names now addable), allows adding paths with flat
instead of recursive hashes, allows specifying a filter (so is a
generalization of filterSource), and allows specifying an expected
hash (enabling safe path adding in pure mode).
This is needed by nixos-install, which uses the Nix store on the
installation CD as a substituter. We don't want to disable signature
checking entirely because substitutes from cache.nixos.org should
still be checked. So now we can pas "local?trusted=1" to mark only the
Nix store in /nix as not requiring signatures.
Fixes#1819.
Instead, if a fixed-output derivation produces has an incorrect output
hash, we now unconditionally move the outputs to the path
corresponding with the actual hash and register it as valid. Thus,
after correcting the hash in the Nix expression (e.g. in a fetchurl
call), the fixed-output derivation doesn't have to be built again.
It would still be good to have a command for reporting the actual hash
of a fixed-output derivation (instead of throwing an error), but
"nix-build --hash" didn't do that.
Following discussion with Shea and Graham. It's a big enough change
from the last release. Also, from a semver perspective, 2.0 makes more
sense because we did remove some interfaces (like nix-pull/nix-push).
Some servers, such as Artifactory, allow uploading with PUT and BASIC
auth. This allows nix copy to work to upload binaries to those
servers.
Worked on together with @adelbertc
In this mode, the following restrictions apply:
* The builtins currentTime, currentSystem and storePath throw an
error.
* $NIX_PATH and -I are ignored.
* fetchGit and fetchMercurial require a revision hash.
* fetchurl and fetchTarball require a sha256 attribute.
* No file system access is allowed outside of the paths returned by
fetch{Git,Mercurial,url,Tarball}. Thus 'nix build -f ./foo.nix' is
not allowed.
Thus, the evaluation result is completely reproducible from the
command line arguments. E.g.
nix build --pure-eval '(
let
nix = fetchGit { url = https://github.com/NixOS/nixpkgs.git; rev = "9c927de4b179a6dd210dd88d34bda8af4b575680"; };
nixpkgs = fetchGit { url = https://github.com/NixOS/nixpkgs.git; ref = "release-17.09"; rev = "66b4de79e3841530e6d9c6baf98702aa1f7124e4"; };
in (import (nix + "/release.nix") { inherit nix nixpkgs; }).build.x86_64-linux
)'
The goal is to enable completely reproducible and traceable
evaluation. For example, a NixOS configuration could be fully
described by a single Git commit hash. 'nixos-rebuild' would do
something like
nix build --pure-eval '(
(import (fetchGit { url = file:///my-nixos-config; rev = "..."; })).system
')
where the Git repository /my-nixos-config would use further fetchGit
calls or Git externals to fetch Nixpkgs and whatever other
dependencies it has. Either way, the commit hash would uniquely
identify the NixOS configuration and allow it to reproduced.
E.g.
$ time nix cat-store --store https://cache.nixos.org?local-nar-cache=/tmp/nars \
/nix/store/b0w2hafndl09h64fhb86kw6bmhbmnpm1-blender-2.79/share/icons/hicolor/scalable/apps/blender.svg > /dev/null
real 0m4.139s
$ time nix cat-store --store https://cache.nixos.org?local-nar-cache=/tmp/nars \
/nix/store/b0w2hafndl09h64fhb86kw6bmhbmnpm1-blender-2.79/share/icons/hicolor/scalable/apps/blender.svg > /dev/null
real 0m0.024s
(Before, the second call took ~0.220s.)
This will use a NAR listing in
/tmp/nars/b0w2hafndl09h64fhb86kw6bmhbmnpm1.ls containing all metadata,
including the offsets of regular files inside the NAR. Thus, we don't
need to read the entire NAR. (We do read the entire listing, but
that's generally pretty small. We could use a SQLite DB by borrowing
some more code from nixos-channel-scripts/file-cache.hh.)
This is primarily useful when Hydra is serving files from an S3 binary
cache, in particular when you have giant NARs. E.g. we had some 12 GiB
NARs, so accessing individuals files was pretty slow.
The name had become a misnomer since it's not only for substitution
from binary caches, but when adding/copying any
(non-content-addressed) path to a store.
This allows specifying the AWS configuration profile to use. E.g.
nix copy --from s3://my-cache?profile=aws-dev-account /nix/store/cf3isrlqavvd5w7rpky1fa8j9lcnlggm-...
As far as we're concerned, not being able to access a file just means
the file is missing. Plus, AWS explicitly goes out of its way to
return a 403 if the file is missing and the requester doesn't have
permission to list the bucket.
Also getting rid of an old hack that Eelco said was only relevant
to an older AWS SDK.
This will allow bind and connect to 127.0.0.1, which can reduce purity/
security (if you're running a vulnerable service on localhost) but is
also needed for a ton of test suites, so I'm leaving it turned off by
default but allowing certain derivations to turn it on as needed.
It also allows DNS resolution of arbitrary hostnames but I haven't found
a way to avoid that. In principle I'd just want to allow resolving
localhost but that doesn't seem to be possible.
I don't think this belongs under `build-use-sandbox = relaxed` because we
want it on Hydra and I don't think it's the end of the world.
