Issues:
1. Features gated on disabled experimental settings should warn and be
ignored, not silently succeed.
2. Experimental settings in the same config "batch" (file or env var)
as the enabling of the experimental feature should work.
3. For (2), the order should not matter.
These are analogous to the issues @roberth caught with my changes for
arg handling, but they are instead for config handling.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
In many cases we are dealing with a collection of realisations, they are
all outputs of the same derivation. In that case, we don't need
"derivation hashes modulos" to be part of our map key, because the
output names alone will be unique. Those hashes are still part of the
realisation proper, so we aren't loosing any information, we're just
"normalizing our schema" by narrowing the "primary key".
Besides making our data model a bit "tighter" this allows us to avoid a
double `for` loop in `DerivationGoal::waiteeDone`. The inner `for` loop
was previously just to select the output we cared about without knowing
its hash. Now we can just select the output by name directly.
Note that neither protocol is changed as part of this: we are still
transferring `DrvOutputs` over the wire for `BuildResult`s. I would only
consider revising this once #6223 is merged, and we can mention protocol
versions inside factored-out serialization logic. Until then it is
better not change anything because it would come a the cost of code
reuse.
If my memory is correct, @edolstra objected to modifying `wantedOutputs`
upon falling back to doing a build (as we did before), because we should
only modify it in response to new requests --- *actual* wants --- and
not because we are "incidentally" building all the outptus beyond what
may have been requested.
That's a fair point, and the alternative is to replace the boolean soup
with proper enums: Instead of modifying `wantedOuputs` som more, we'll
modify `needsRestart` to indicate we are passed the need.
In https://github.com/NixOS/nix/pull/6311#discussion_r834863823, I
realized since derivation goals' wanted outputs can "grow" due to
overlapping dependencies (See `DerivationGoal::addWantedOutputs`, called
by `Worker::makeDerivationGoalCommon`), the previous bug fix had an
unfortunate side effect of causing more pointless rebuilds.
In paticular, we have this situation:
1. Goal made from `DerivedPath::Built { foo, {a} }`.
2. Goal gives on on substituting, starts building.
3. Goal made from `DerivedPath::Built { foo, {b} }`, in fact is just
modified original goal.
4. Though the goal had gotten as far as building, so all outputs were
going to be produced, `addWantedOutputs` no longer knows that and so
the goal is flagged to be restarted.
This might sound far-fetched with input-addressed drvs, where we usually
basically have all our goals "planned out" before we start doing
anything, but with CA derivation goals and especially RFC 92, where *drv
resolution* means goals are created after some building is completed, it
is more likely to happen.
So the first thing to do was restore the clearing of `wantedOutputs` we
used to do, and then filter the outputs in `buildPathsWithResults` to
only get the ones we care about.
But fix also has its own side effect in that the `DerivedPath` in the
`BuildResult` in `DerivationGoal` cannot be trusted; it is merely the
*first* `DerivedPath` for which this goal was originally created.
To remedy this, I made `BuildResult` be like it was before, and instead
made `KeyedBuildResult` be a subclass wit the path. Only
`buildPathsWithResults` returns `KeyedBuildResult`s, everything else
just becomes like it was before, where the "key" is unambiguous from
context.
I think separating the "primary key" field(s) from the other fields is
good practical in general anyways. (I would like to do the same thing
for `ValidPathInfo`.) Among other things, it allows constructions like
`std::map<Key, ThingWithKey>` where doesn't contain duplicate keys and
just precludes the possibility of those duplicate keys being out of
sync.
We might leverage the above someday to overload `buildPathsWithResults`
to take a *set* of return a *map* per the above.
-----
Unfortunately, we need to avoid C++20 strictness on designated
initializers.
(BTW
https://www.open-std.org/jtc1/sc22/wg21/docs/papers/2021/p2287r1.html
this offers some new syntax for this use-case. Hopefully this will be
adopted and we can eventually use it.)
No having that yet, maybe it would be better to not make
`KeyedBuildResult` a subclass to just avoid this.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
As requested by @roberth, it is good to call out the specific instances
we care about, which is `!` for the RPC protocols, and `^` for humans.
This doesn't take advantage of parametricity as much, but since the
human and computer interfaces are good to decouple anyways (we don't
care if they drift further apart over time in the slightest) some
separation and slight duplication is fine.
Also, unit test both round trips.
- Create a glossary entry for experimental features.
- Have the man page experimental feature notice link `nix-commmand`.
(Eventually this should be programmed, based on whether the command is
experimental, and if so what experimental feature does it depend on.)
- Document which installables depend on which experimental features.
I tried to use the same style (bold warning and block quote) that the
top of the man page uses.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
The warning message should produce an installable name that can be
passed to `nix build`, `nix path-info`, etc. again. Since the CLI
expects that the .drv path and the output names are separated by
a caret, the warning message must also separate the .drv path and output
names with a caret.
However, `DerivedPath::Built.to_string()` uses an exclamation point as
the separator instead. This commit adds a `separator` argument to the
to_string method.
This changes the warning message from:
If this command is now failing try again with '/nix/store/foo.drv!*'
to:
If this command is now failing try again with '/nix/store/foo.drv^*'
More progress on issue #5729.
Instead of having it by the default method in `Store` itself, have it be
the implementation in `DummyStore` and `LegacySSHStore`. Then just the
implementations which fail to provide the method pay the "penalty" of
dealing with the icky `unimplemented` function for non-compliance.
Combined with my other recent PRs, this finally makes `Store` have no
`unsupported` calls!
This is somewhat hacky fix just for 2.15. I unintentionally hid them
from the manual, when no one wanted to hide them that (including
myself). I also required the experimental feature to be enabled in an
order-dependent way, which is not good.
The simplest fix for this immanent release is just to always show them,
and always allow them to be set.
Effectively undoes some changes from aa663b7e89
Getting the occasional SQLITE_BUSY is expected when the database is being
accessed concurrently. The retry will likely succeed so it is pointless to warn
immediately. Instead we track how long each retrySQLite block has been running,
and only begin warning after a second has elapsed (and then every 10 seconds
subsequently).
Some of the factoring out was taken from #7912 by @mupdt. Thanks!
No behavior should be changed in this commit.
Co-Authored-By: mupdt <25388474+mupdt@users.noreply.github.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
How signals should be handled depends on what kind of process Nix
is integrated into. The signal handler thread used by the stand-alone
Nix commands / processes may not work well in the context of other
runtime systems, such as those of Python, Perl, or Haskell.
libutil is a dependency of libstore, so it should always be
initialized as such.
libutil is also a dependency of libmain. Being explicit about this
dependency might be good, but not worth the slight code complexity
until the library structure gets more advanced.
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
Quote
Why not initLibExpr()? initGC() is essentially that, but
detectStackOverflow is not an instance of the init function concept, as
it may have to be invoked more than once per process.
Furthermore, renaming initGC to initLibExpr is more trouble than it's
worth at this time.
This code is bad. We shouldn't unset variables in programs whose
children may need them. Fixing one issue at a time, so postponing.
See https://github.com/NixOS/nix/issues/7731
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
It is required for the sandbox, which is a libstore responsibility;
not just libmain.
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
The goal of this reordering is to make initLibStore self-sufficient
in a following commit.
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
Using libstore without loading the config file is risky, as sqlite
may then be misconfigured. See https://github.com/cachix/cachix/issues/475
* Finish converting existing comments for internal API docs
99% of this was just reformatting existing comments. Only two exceptions:
- Expanded upon `BuildResult::status` compat note
- Split up file-level `symbol-table.hh` doc comments to get
per-definition docs
Also fixed a few whitespace goofs, turning leading tabs to spaces and
removing trailing spaces.
Picking up from #8133
* Fix two things from comments
* Use triple-backtick not indent for `dumpPath`
* Convert GNU-style `\`..'` quotes to markdown style in API docs
This will render correctly.
