Commit graph

1274 commits

Author SHA1 Message Date
Eelco Dolstra
691a1bd717 Merge branch 'minimal-logger' of https://github.com/Ma27/nix 2020-08-28 10:50:52 +02:00
Eelco Dolstra
7a02865b94
Move import docs 2020-08-25 14:06:01 +02:00
Eelco Dolstra
0f314f3c25
Generate builtins section of the manual 2020-08-24 14:49:30 +02:00
Eelco Dolstra
a990f063ff
Move primop docs inline
This makes them available to 'nix repl'.
2020-08-24 14:31:10 +02:00
Eelco Dolstra
33b1679d75
Allow primops to have Markdown documentation 2020-08-24 13:16:02 +02:00
Eelco Dolstra
dc2f278c95
Allow 'nix' subcommands to provide docs in Markdown format 2020-08-20 12:21:46 +02:00
Eelco Dolstra
3c4f8c9175
List deprecated option aliases in the docs 2020-08-20 11:13:17 +02:00
Eelco Dolstra
c3e20d8c28
Consistency 2020-08-19 18:30:17 +02:00
Eelco Dolstra
c8fa39324a
Generate the nix.conf docs from the source code
This means we don't have two (divergent) sets of option descriptions
anymore.
2020-08-19 18:28:04 +02:00
Eelco Dolstra
8a97b11374
Improve margins between sections
The default CSS puts almost no space between sections, but a lot of
space between subsections. This flips that around.
2020-08-19 12:31:18 +02:00
Eelco Dolstra
069340179e
Improve nix.1 manpage generator 2020-08-18 15:15:35 +02:00
Eelco Dolstra
6f19c776db
Start generation of the nix.1 manpage 2020-08-17 19:33:18 +02:00
Eelco Dolstra
7cdc739ece
Merge remote-tracking branch 'origin/master' into markdown 2020-08-17 13:43:39 +02:00
Matthew Bauer
641c950701 Add hashed-mirrors back
Some users have their own hashed-mirrors setup, that is used to mirror
things in addition to what’s available on tarballs.nixos.org. Although
this should be feasable to do with a Binary Cache, it’s not always
easy, since you have to remember what "name" each of the tarballs has.
Continuing to support hashed-mirrors is cheap, so it’s best to leave
support in Nix. Note that NIX_HASHED_MIRRORS is also supported in
Nixpkgs through fetchurl.nix.

Note that this excludes tarballs.nixos.org from the default, as in
\#3689. All of these are available on cache.nixos.org.
2020-08-06 18:19:09 -05:00
Eelco Dolstra
bf290c2306
Merge remote-tracking branch 'origin/master' into markdown 2020-07-31 16:07:04 +02:00
Eelco Dolstra
2ae9ac2369
console -> shell 2020-07-31 16:02:37 +02:00
Eelco Dolstra
1d0a7b54fa
Enable syntax highlighting 2020-07-31 15:43:25 +02:00
Matthew Bauer
05ac4db39a Merge remote-tracking branch 'origin/master' into substitute-other-storedir 2020-07-30 12:38:24 -05:00
Maximilian Bosch
6ccfdb79c7
libutil/logging: extend internal-json logger to make it more machine-readable
The new error-format is pretty nice from a UX point-of-view, however
it's fairly hard to parse the output e.g. for editor plugins such as
vim-ale[1] that use `nix-instantiate --parse` to determine syntax errors in
Nix expression files.

This patch extends the `internal-json` logger by adding the fields
`line`, `column` and `file` to easily locate an error in a file and the
field `raw_msg` which contains the error-message itself without
code-lines and additional helpers.

An exemplary output may look like this:

```
[nix-shell]$ ./inst/bin/nix-instantiate ~/test.nix --log-format minimal
{"action":"msg","column":1,"file":"/home/ma27/test.nix","level":0,"line":4,"raw_msg":"syntax error, unexpected IF, expecting $end","msg":"<full error-msg with code-lines etc>"}
```

[1] https://github.com/dense-analysis/ale
2020-07-26 02:29:57 +02:00
Eelco Dolstra
1308c8404e
Remove DocBook manual 2020-07-24 15:48:40 +02:00
Eelco Dolstra
05a282295f
Fix internal links 2020-07-24 15:46:16 +02:00
Eelco Dolstra
da3d776cb9
Fix some dangling references 2020-07-24 14:31:33 +02:00
Eelco Dolstra
4a79b3598f
Fix nix-copy-closure manpage 2020-07-24 13:01:00 +02:00
Eelco Dolstra
7a0e6f076a
Move figures 2020-07-24 12:58:31 +02:00
Eelco Dolstra
758c9ee1bb
Clean up the manpages 2020-07-24 12:56:19 +02:00
Eelco Dolstra
8d0b311a1c
Get rid of footnotes
Markdown doesn't support them.
2020-07-24 11:43:44 +02:00
Eelco Dolstra
69333cb62c
Sigh 2020-07-23 18:27:20 +02:00
Eelco Dolstra
802150f987
<replaceable> -> <emphasis>
Pandoc doesn't know <replaceable> so let's force it to be rendered as
italics.
2020-07-23 18:27:20 +02:00
Eelco Dolstra
ee05108472
<simplesect> -> <section>
Pandoc silently ignores <simplesect>...
2020-07-23 18:27:20 +02:00
Eelco Dolstra
136fd55bb2
Get rid of <figure> 2020-07-23 18:27:20 +02:00
Eelco Dolstra
ca130b73a0
Get rid of <example>
Markdown doesn't have floats so we can't have this.
2020-07-23 18:27:20 +02:00
Eelco Dolstra
13df1faf25
Get rid of callouts since Markdown doesn't support them 2020-07-23 18:27:20 +02:00
Eelco Dolstra
efff6cf163
Install all manpages 2020-07-23 18:27:12 +02:00
Eelco Dolstra
504b7abc45
Convert commands 2020-07-23 18:27:12 +02:00
Eelco Dolstra
efdb89994c
Convert nix.conf manpage 2020-07-23 18:27:11 +02:00
Eelco Dolstra
f390303566
Reconvert 2020-07-23 18:27:11 +02:00
Eelco Dolstra
c20c082383
<envar> -> <literal> 2020-07-23 18:27:11 +02:00
Eelco Dolstra
942cd687f9
Remove libxml2 / libxslt prerequisites 2020-07-23 18:26:48 +02:00
Eelco Dolstra
ef606760ab
Pandoc conversion 2020-07-23 18:26:48 +02:00
Eelco Dolstra
d004715665
Fix link 2020-07-23 18:26:48 +02:00
Eelco Dolstra
315407c16f
Remove subtitles 2020-07-23 18:26:48 +02:00
Eelco Dolstra
ebdc1f6dfb
Typo 2020-07-23 18:26:48 +02:00
Eelco Dolstra
8e41c38867
Remove references to xmllint 2020-07-23 18:26:48 +02:00
Eelco Dolstra
e0ea3c82ca
Use mdbook 2020-07-23 18:26:48 +02:00
Eelco Dolstra
650ae14ced
Markdown test 2020-07-23 18:26:48 +02:00
Eelco Dolstra
26fcab53e0
Remove unused file 2020-07-23 18:25:09 +02:00
Jörg Thalheim
6633605341
Update doc/manual/hacking.xml
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
2020-07-20 22:30:39 +01:00
Jörg Thalheim
f0100f5590
README: improve development docs 2020-07-20 15:46:28 +01:00
Matthew Bauer
bcf8582091 Merge remote-tracking branch 'origin/master' into substitute-other-storedir 2020-06-24 12:52:09 -04:00
Jörg Thalheim
3685f4eec6
docs/installer: add correct curl flags
also see https://nixos.org/download.html
2020-06-23 23:04:10 +01:00
Matthew Bauer
2796b01e86 Merge remote-tracking branch 'origin/master' into substitute-other-storedir 2020-06-19 14:22:06 -04:00
Eelco Dolstra
6c000eed80
Merge pull request #3709 from expipiplus1/master
Mention number of derivations to be build/fetched in output
2020-06-18 19:03:05 +02:00
Samir Talwar
9069759767
Instruct the user to follow redirects when installing Nix.
Nix installation now requires following redirects using `curl -L`. This
is currently represented on the [Nix download page][] but not in the
manual. This change updates the manual to reflect this.

Using `curl` without the `-L` flag results in an empty body, making
installation a no-op.

[Nix download page]: https://nixos.org/download.html
2020-06-18 10:29:24 +02:00
Matthew Bauer
7bd88cc1dc Merge remote-tracking branch 'origin/master' into substitute-other-storedir 2020-06-17 13:32:29 -04:00
Joe Hermaszewski
da8aac6ce8 Mention number of derivations to be build/fetched in output
Also correct grammar for the case of a single derivation.
2020-06-17 20:27:27 +08:00
Matthew Bauer
3e3eaa90dd Remove hashed-mirrors 2020-06-12 09:51:44 -05:00
zimbatm
2c4de6af10 add documentation 2020-06-08 09:31:15 +02:00
Joachim Breitner
e2af11ce07 Manpages: Do not refer to nixpkgs-channels
Unless I am misinformed, using the `nixpkgs` repository directly is now
preferred?
2020-05-23 15:26:59 +02:00
Domen Kožar
c129e7c8f4
Merge pull request #3212 from LnL7/darwin-10.15-install
install: configure and bootstrap synthetic.conf on darwin
2020-05-23 11:15:31 +02:00
Travis A. Everett
2b0a81d92d
focus on golden-path covering most scenarios
This should handle installation scenarios we can handle with
anything resembling confidence. Goal is approximating the existing
setup--not enforcing a best-practice...

Approaches (+ installer-handled, - manual) and configs each covers:

+ no change needed; /nix OK on boot volume:
  All pre-Catalina (regardless of T2 or FileVault use)

+ create new unencrypted volume:
  Catalina, pre-T2, no FileVault

+ create new encrypted-at-rest volume:
  Catalina, pre-T2, FileVault
  Catalina, T2, no FileVault

- require user to pre-create encrypted volume
  Catalina, T2, FileVault
2020-05-21 19:58:11 +02:00
Daiderd Jordan
477d7c2d07
installer: refuse apfs volume creation when FileVault is enabled 2020-05-21 19:58:11 +02:00
Daiderd Jordan
3386575296
manual: clarify volume creation section 2020-05-21 19:58:11 +02:00
Daiderd Jordan
04f597c3f4
install: improve output and error handling 2020-05-21 19:58:11 +02:00
Daiderd Jordan
ee89b7797d
manual: add apfs volume section 2020-05-21 19:58:11 +02:00
Krzysztof Gogolewski
c8cb558849 documentation: avoid unquoted URLs 2020-05-21 19:29:13 +02:00
Jörg Thalheim
e223eeac09
Remove -j option from simple-build-testing
By default Nix/NixOS already set a reasonable default `max-jobs = auto`
so we don't need to mention it in this tutorial.
The option is still documented in other parts of the documentation
if users ever stumble over this.

Fixes https://github.com/NixOS/nix/issues/2531
2020-05-16 08:45:19 +01:00
Domen Kožar
23e5b48ca4
Merge pull request #3581 from TerrorJack/patch-1
Update "Upgrading Nix" documentation
2020-05-11 18:12:35 +02:00
Domen Kožar
612d57c5de
Merge pull request #3582 from bhipple/doc/fixed-output
doc: consistently refer to 'fixed-output' with a dash
2020-05-11 18:10:19 +02:00
Benjamin Hipple
146f9c114f doc: consistently refer to 'fixed-output' with a dash
General cleanup that makes it easier to search for the term.
2020-05-09 10:58:43 -04:00
Shao Cheng
446649e540
Update "Upgrading Nix" documentation
This PR proposes two changes to the "Upgrading Nix" documentation:

* Besides updating `nixpkgs.nix`, we also update `nixpkgs.cacert`, so that the certificates are up-to-date as well.
* Add the instructions for multi-user mode on Linux.
2020-05-09 15:59:39 +02:00
Dani
52cffafd24
Fix typo 2020-05-09 13:48:31 +02:00
Eelco Dolstra
41caaaad36
Manual: Typo 2020-05-07 16:37:33 +02:00
Eelco Dolstra
479e8bf00b
Manual: Fix typo 2020-05-07 16:08:15 +02:00
zimbatm
895516cadf
add NIX_USER_CONF_FILES
Motivation: maintain project-level configuration files.

Document the whole situation a bit better so that it corresponds to the
implementation, and add NIX_USER_CONF_FILES that allows overriding
which user files Nix will load during startup.
2020-04-14 18:45:06 +02:00
Eelco Dolstra
55cefd41d6 Merge branch 'fetchgit-recursive' of https://github.com/blitz/nix 2020-04-07 13:45:17 +02:00
Julian Stecklina
ea861be292 Add documentation for submodule support in fetchGit 2020-03-29 22:29:57 +02:00
Greg Price
e40e01c1dd doc: Files in the store have modes 444/555, not 644/755
This line has been this way since it was written, in 9e08f5efe
in 2006.

I think it was just a small mistake then; Eelco's thesis earlier
that year says the permission on each file is set to 0444 or 0555
in a derivation's output as part of the build process.  In any
case I'm pretty sure that's the behavior now.
2020-03-23 20:23:27 -07:00
jakobrs
c5a488afc0 Remove the --delete option for --gc
Running `nix-store --gc --delete` will, as of Nix 2.3.3, simply fail
because the --delete option conflicts with the --delete operation.

  $ nix-store --gc --delete
  error: only one operation may be specified
  Try 'nix-store --help' for more information.

Furthermore, it has been broken since at least Nix 0.16 (which was
released sometime in 2010), which means that any scripts which depend
on it should have been broken at least nine years ago. This commit
simply formally removes the option. There should be no actual difference
in behaviour as far as the user is concerned: it errors with the exact
same error message. The manual has been edited to remove any references
to the (now gone) --delete option.

Other information:
* Path for Nix 0.16 used:
  /nix/store/rp3sgmskn0p0pj1ia2qwd5al6f6pinz4-nix-0.16
2020-03-19 19:41:23 +01:00
Eelco Dolstra
779ef8f5ef
Merge pull request #3380 from contrun/no-attr-path-for-installed
display attr-path only when queried available
2020-03-13 19:26:20 +01:00
YI
b6d794fb8d display attr-path only when queried available 2020-03-14 00:36:26 +08:00
Eelco Dolstra
858ad7a4b3 Remove callout graphics
Fixes #3396.
2020-03-13 16:32:43 +01:00
Eelco Dolstra
9c7e90f414
style.css: Remove
This file is licensed under the GPL. Originally, Nix was also
GPL-licensed so that was fine. However, we later changed the license
to the LGPL but missed the fact that style.css has an incompatible
license.

Since the Nix manual at nixos.org uses its own styling, we can remove
this file.

Fixes #3392.
2020-03-13 15:02:32 +01:00
Eelco Dolstra
e063c71a79
nixos.org/releases -> releases.nixos.org 2020-03-11 10:33:23 +01:00
Eelco Dolstra
2ba67da053
Merge pull request #3332 from Calvin-L/patch-1
Document that autoconf is a dependency
2020-02-19 13:02:35 +01:00
Eelco Dolstra
16e9a75287 Typo 2020-02-19 12:32:33 +01:00
Benjamin Hipple
762febafe2 doc: mention how to turn on pure evaluation mode in manual
The flag is `--pure-eval`, which can be found by looking at the test suite; it
should be in the notes describing the feature as well, since otherwise users may
assume this is referencing something like `nix-shell --pure`.
2020-02-15 01:44:51 -05:00
Calvin Loncaric
46992e71a1
Document that autoconf is a dependency 2020-01-26 17:22:47 -08:00
Benjamin Hipple
5d24e18e29 doc: touchup release notes for 2.3
- At the top of the release notes, we announce sandboxing is now enabled by default,
then at the bottom it says it's now disabled when missing kernel support. These
can be merged into one point for clarity.

- The point about `max-jobs` defaulting to 1 appears unrelated to sandboxing.
2020-01-14 00:14:03 -05:00
Joe Pea
3895e78794
Add link to official channels in nix-channel command ref 2020-01-09 14:20:08 -08:00
Joe Pea
7ccfa7ca4f
Add a link to official channels in the Channels chapter. 2020-01-09 14:15:19 -08:00
Profpatsch
7923e22276 doc/manual: add ids to the advanced attribute definitions
This makes it possible to reference single attribute definitions,
for pointing people to their exact definition.
2019-12-03 18:22:27 +01:00
Profpatsch
7395e091c5 doc/manual: add note to allowSubstitutes advanced attribute 2019-12-03 18:01:45 +01:00
Eelco Dolstra
0be8d7784f
Typo 2019-11-26 20:33:46 +01:00
Eelco Dolstra
73efc1e8e7
Merge branch 'document-dry-run-option' of https://github.com/Ma27/nix 2019-11-26 20:32:50 +01:00
Arnout Engelen
4e70652ee3 Document builtins.placeholder 2019-11-25 18:00:05 +01:00
Niklas Hambüchen
07294e988c manual: nix-shell: Elaborate on using -p with expressions.
This documents the outcome of the change in
https://github.com/NixOS/nix/issues/454:

> We can also automatically add parentheses in the generated
> `buildInputs`, so you can type `nix-shell -p "expr"`
> instead of `"(expr").
2019-11-10 17:29:13 +01:00
Maximilian Bosch
52ffe2797a
doc: Document --dry-run option for nix-build 2019-11-07 00:11:57 +01:00
Eelco Dolstra
81a9b93689
Fix manual build 2019-11-05 11:21:32 +01:00
Eelco Dolstra
7876027071
Merge pull request #3193 from matthewbauer/patch-11
Update man to show that nix-shell allows --arg
2019-11-05 11:18:24 +01:00
Eelco Dolstra
78b8203e50
Merge pull request #3180 from kevinastock/patch-1
docs: fix upper bound on number of consumed cores
2019-11-05 11:17:02 +01:00
Eelco Dolstra
376802c9b8
Merge pull request #3199 from kevinastock/patch-2
docs: xref doesn't render in title
2019-11-05 11:16:15 +01:00
Kevin Stock
cea05e5ee7
docs: correct default location of log directory 2019-11-04 16:23:03 -05:00
Kevin Stock
808cb6444e
docs: xref doesn't render in title
The `post-build-hook` text currently appears in the index, but not on the actual title line of the section, this follows the pattern used in a previous section to get a reference into a title.
2019-11-02 17:55:53 -04:00
Matthew Bauer
f1d4ba2afd
Update man to show that nix-shell allows --arg 2019-11-01 13:25:15 -04:00
Kevin Stock
99aac72a16
docs: fix upper bound on number of consumed cores 2019-10-30 16:53:04 -04:00
Eelco Dolstra
b421895c1e
Merge pull request #3161 from schlarpc/patch-1
Remove superfluous IAM action for S3 cache
2019-10-23 16:34:54 +02:00
Chaz Schlarp
c92ea927e5
Remove superfluous IAM action for S3 cache
`s3:ListObjects` isn't a real IAM action, but _is_ the name of an S3 API method. `s3:ListBucket` is the relevant action for that method.

https://docs.aws.amazon.com/IAM/latest/UserGuide/list_amazons3.html
2019-10-22 16:04:49 -07:00
Ersin Akinci
f107a27002 Tweak path hint 2019-10-21 14:16:55 -07:00
Ersin Akinci
b7a936224e Add hint about path in builtins.import 2019-10-21 14:11:26 -07:00
Ersin Akinci
9be7787ec0 Revert "Document import <path> syntax"
This reverts commit d8730fb86f.
2019-10-21 13:12:41 -07:00
Ersin Akinci
d8730fb86f Document import <path> syntax 2019-10-20 19:08:05 -07:00
Eelco Dolstra
ab4dd1d783
Merge pull request #2291 from Taneb/master
nix-channel documentation: don't suggest deprecated function
2019-10-17 12:53:42 +02:00
Danny Bautista
00a567588e Fix typos in the Nix Manual. 2019-10-08 14:02:40 -04:00
Domen Kožar
043365c2fb
Merge pull request #3080 from Infinisil/tryEval-docs
docs: Note that tryEval doesn't do deep evaluation
2019-09-30 14:03:16 +02:00
Joseph Lucas
10bfc5c0d0
Update garbage-collection.xml readability
1. remove a typo space
2. Simplify negative style by using affirmative style
2019-09-23 13:18:59 +00:00
Alexandre Esteves
9533d85ce0 Move 'builtins.splitVersion' to position respecting alphabetical order 2019-09-17 23:40:49 +01:00
Julien Tanguy
ae244af242 docs: Use the explicit ref for fetchGit with a tag
With the merge of #2582, the syntax "tags/1.9" for refs does not work
anymore.
However, the new syntax "refs/tags/1.9" seems to support annotated tags,
such as "refs/tags/2.0".

Closes #2385.
2019-09-11 14:18:47 +02:00
Julien Tanguy
92ede15dd9 docs: Fix a typo in github in an example 2019-09-11 14:11:37 +02:00
Eelco Dolstra
252c78b288
Tweak release notes 2019-09-04 15:59:07 +02:00
Eelco Dolstra
b774845af7
Set release date 2019-09-04 12:53:22 +02:00
Silvan Mosberger
e4ea3e0306
docs: Note that tryEval doesn't do deep evaluation 2019-09-03 07:32:44 +02:00
Eelco Dolstra
8478c99d09
Merge pull request #3048 from toonn/nix-env_doc
Fix nix-env documentation for --delete-generations
2019-08-29 15:22:01 +02:00
toonn
5bdac86be2 Reword to clarify newer generations are left alone
My attempt at clarifying the docs resulted in a false explanation. This
is now fixed and I added an example to eliminate all possible confusion.
2019-08-29 13:56:21 +02:00
Eelco Dolstra
787015fec0 Merge branch 'master' of github.com:NixOS/nix 2019-08-27 21:18:20 +02:00
Eelco Dolstra
fdff96501f Update release notes 2019-08-27 21:18:00 +02:00
Eelco Dolstra
177e5742fa
Merge pull request #3056 from grahamc/operators
operators: document exact precedence, split up similar operators
2019-08-27 17:12:36 +02:00
Eelco Dolstra
45b3dc325a Add 2.3 release notes 2019-08-27 17:00:04 +02:00
Graham Christensen
171d784404
docs: operators: Make OR and AND capitalized 2019-08-27 06:55:22 -04:00
Graham Christensen
15ee2bc2fe
Merge pull request #2946 from vmandela/proxy
installer: handle network proxy in systemd multi-user install
2019-08-24 14:55:19 -04:00
Graham Christensen
057af1dbd8
docs: document the installer's use of proxy env vars 2019-08-24 09:08:44 -04:00
Graham Christensen
92ddce4f46
operators: document exact precedenc, split up similar operators 2019-08-23 15:50:54 -04:00
Toon Nolten
1dbaf11948 Fix nix-env documentation for --delete-generations
The documentation for `--delete-generations` had an erroneous fullstop
and as it turns out inaccurate information on the `+No.` syntax.
2019-08-17 16:33:35 +02:00
Eelco Dolstra
b7ea98bf34
Merge pull request #2945 from danidiaz/doc001
Expanded documentation for .nix-defexpr
2019-08-15 15:03:21 +02:00
Eelco Dolstra
477f82e5a7
Merge pull request #2782 from grahamc/flames
Track function start and end
2019-08-15 14:20:42 +02:00
Daniel Diaz
653c407784
Expanded documentation for .nix-defexpr 2019-08-15 08:05:22 -04:00
Graham Christensen
ee9c988a1b
Track function start and ends for flame graphs
With this patch, and this file I called `log.py`:

    #!/usr/bin/env nix-shell
    #!nix-shell -i python3 -p python3 --pure

    import sys
    from pprint import pprint

    stack = []
    timestack = []

    for line in open(sys.argv[1]):
        components = line.strip().split(" ", 2)
        if components[0] != "function-trace":
            continue

        direction = components[1]
        components = components[2].rsplit(" ", 2)

        loc = components[0]
        _at = components[1]
        time = int(components[2])

        if direction == "entered":
            stack.append(loc)
            timestack.append(time)
        elif direction == "exited":
            dur = time - timestack.pop()
            vst = ";".join(stack)
            print(f"{vst} {dur}")
            stack.pop()

and:

    nix-instantiate --trace-function-calls -vvvv ../nixpkgs/pkgs/top-level/release.nix -A unstable > log.matthewbauer 2>&1
    ./log.py ./log.matthewbauer > log.matthewbauer.folded
    flamegraph.pl --title matthewbauer-post-pr log.matthewbauer.folded > log.matthewbauer.folded.svg

I can make flame graphs like: http://gsc.io/log.matthewbauer.folded.svg

---

Includes test cases around function call failures and tryEval. Uses
RAII so the finish is always called at the end of the function.
2019-08-14 16:09:35 -04:00
Graham Christensen
a02457db71
conf: stalled-download-timeout: make tunable
Make curl's low speed limit configurable via stalled-download-timeout.
Before, this limit was five minutes without receiving a single byte.
This is much too long as if the remote end may not have even
acknowledged the HTTP request.
2019-08-08 10:22:13 -04:00
Graham Christensen
1eeaf99cf8
fixup: docs for post-build-hook 2019-08-07 14:53:11 -04:00
Eelco Dolstra
56df30cd3f
Merge pull request #2995 from tweag/post-build-hook
Add a post build hook
2019-08-07 15:02:29 +02:00
Graham Christensen
363a2f6826
post-build-hook: docs fixup 2019-08-06 14:26:43 -04:00
regnat
7c5596734f
Add a post-build-hook
Passing `--post-build-hook /foo/bar` to a nix-* command will cause
`/foo/bar` to be executed after each build with the following
environment variables set:

    DRV_PATH=/nix/store/drv-that-has-been-built.drv
    OUT_PATHS=/nix/store/...build /nix/store/...build-bin /nix/store/...build-dev

This can be useful in particular to upload all the builded artifacts to
the cache (including the ones that don't appear in the runtime closure
of the final derivation or are built because of IFD).

This new feature prints the stderr/stdout output to the `nix-build`
and `nix build` client, and the output is printed in a Nix 2
compatible format:

    [nix]$ ./inst/bin/nix-build ./test.nix
    these derivations will be built:
      /nix/store/ishzj9ni17xq4hgrjvlyjkfvm00b0ch9-my-example-derivation.drv
    building '/nix/store/ishzj9ni17xq4hgrjvlyjkfvm00b0ch9-my-example-derivation.drv'...
    hello!
    bye!
    running post-build-hook '/home/grahamc/projects/github.com/NixOS/nix/post-hook.sh'...
    post-build-hook: + sleep 1
    post-build-hook: + echo 'Signing paths' /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
    post-build-hook: Signing paths /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
    post-build-hook: + sleep 1
    post-build-hook: + echo 'Uploading paths' /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
    post-build-hook: Uploading paths /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
    post-build-hook: + sleep 1
    post-build-hook: + printf 'very important stuff'
    /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation

    [nix-shell:~/projects/github.com/NixOS/nix]$ ./inst/bin/nix build -L -f ./test.nix
    my-example-derivation> hello!
    my-example-derivation> bye!
    my-example-derivation (post)> + sleep 1
    my-example-derivation (post)> + echo 'Signing paths' /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
    my-example-derivation (post)> Signing paths /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
    my-example-derivation (post)> + sleep 1
    my-example-derivation (post)> + echo 'Uploading paths' /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
    my-example-derivation (post)> Uploading paths /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
    my-example-derivation (post)> + sleep 1
    my-example-derivation (post)> + printf 'very important stuff'
    [1 built, 0.0 MiB DL]

Co-authored-by: Graham Christensen <graham@grahamc.com>
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
2019-08-02 10:48:15 -04:00
Eelco Dolstra
320126aeeb
Tweak min-free/max-free descriptions 2019-08-02 14:04:09 +02:00
Graham Christensen
cf6172f05e
docs: document balancing cores and max-jobs 2019-07-19 08:28:44 -04:00
Eelco Dolstra
b5ae85f088
Merge pull request #2882 from grahamc/docs/1115-tarball-ttl
tarball-ttl: document
2019-07-06 00:15:27 +02:00
Graham Christensen
648bdf153d
tarball-ttl: document
Incorporates text from Niklas Hambüchen in #2978

Closes #1115
2019-07-05 15:55:28 -04:00
Eelco Dolstra
7d6ba1dc90
Merge branch 'autoconf-ubuntu-16.04-fixes' of https://github.com/nh2/nix 2019-07-03 08:02:45 +02:00
Niklas Hambüchen
57daa860e8 autoconf: Fix C++17 detection not working on Ubuntu 16.04.
And probably many other distributions.

Until now, ./configure would fail silently printing a warning

    ./configure: line 4621: AX_CXX_COMPILE_STDCXX_17: command not found

and then continuing, later failing with a C++ #error saying that some C++11
feature isn't supported (it didn't even get to the C++17 features).

This is because older distributions don't come with the
`AX_CXX_COMPILE_STDCXX_17` m4 macro.

This commit vendors that macro accordingly.

Now ./configure complains correctly:

    configure: error: *** A compiler with support for C++17 language features is required.

On Ubuntu 16.04, ./configure completes if a newer compiler is used, e.g. with
gcc-7 from https://launchpad.net/~ubuntu-toolchain-r/+archive/ubuntu/test
using:

    ./bootstrap.sh
    ./configure CXX=g++-7 --disable-doc-gen --with-boost=$(nix-build --no-link '<nixpkgs>' -A boost.dev)
2019-07-03 04:32:25 +02:00
Niklas Hambüchen
1f97b16b1d autoconf: Work around editline not being found on Ubuntu 16.04.
And probably other Linux distributions with long-term support releases.

Also update manual stating what version is needed;
I checked that 1.14 is the oldest version with which current nix compiles,
and added autoconf feature checks for some functions added in that release
that nix uses.
2019-07-03 04:32:25 +02:00
Eelco Dolstra
7e1c85c5fb
Merge pull request #2779 from LnL7/build-exit-codes
build: add exit code for hash and check mismatches
2019-07-02 17:37:49 +02:00
Eelco Dolstra
7c0b0dbec8
Merge pull request #2724 from LnL7/manpage-add-fixed
nix-store: document --add-fixed
2019-07-02 15:47:40 +02:00
Eelco Dolstra
33db1d35ae
Merge pull request #2582 from LnL7/fetchgit-refs
fetchGit: allow fetching explicit refs
2019-07-02 15:44:31 +02:00
Daiderd Jordan
a3c77c1536
nix-store: document --add-fixed 2019-07-02 09:12:02 -04:00
Graham Christensen
c8205a3413
builtins.fetchGit: document absolute ref support 2019-07-02 09:05:56 -04:00
Daiderd Jordan
a52c331edb
build: replace 100 offset for build exit codes 2019-07-02 00:12:38 +02:00
Daiderd Jordan
1ac399dd11
nix-store: document exit codes 2019-07-02 00:12:38 +02:00
Eelco Dolstra
88571219d9
nix-channel: Don't fetch binary-cache-url
This has been ignored since the Perl->C++ rewrite.
2019-06-25 13:27:16 +02:00
Bruno Bieth
74a65d313f Nix uses the CPP SDK, not Java 2019-06-20 14:47:45 +02:00
JorisE
4b0d613383
Minor typo 2019-06-04 14:12:03 +02:00
Maximilian Bosch
b502b6682b
doc: clarify that optional attrs in a function argument will be ignored unless specified
In `args@{ a ? 1 }: /* ... */` the value `a` won't be a part of `args`
unless it's specified when calling the function, the default value will
be ignored in this case.

My personal point of view is that this behavior is a matter of taste, at
least I was pretty sure that unmatched arguments will be a part of
`args@` while debugging some Nix code last week.

I decided to add a warning to the docs which hopefully reduces the
confusion of further Nix developers who thought the same about `args@`.
2019-05-21 18:08:26 +02:00
Vladimír Čunát
c0559a1d60
docs: describe $IN_NIX_SHELL values (#2796)
See commit 1bffd83e1a
2019-05-17 09:50:42 +02:00
Graham Christensen
a5efe61786
Clarify where output from the diff hook goes. 2019-05-12 13:23:30 -04:00
Graham Christensen
6df61db060
diff hook: execute as the build user, and pass the temp dir 2019-05-12 13:17:26 -04:00
Graham Christensen
c78686e411
build: run diff-hook under --check and document diff-hook 2019-05-12 13:17:24 -04:00
Eelco Dolstra
71eb76a0d4
Merge pull request #2765 from nh2/manual-nixpkgs-word
manual: "Nix Package collection" -> "Nixpkgs package collection".
2019-05-08 10:19:59 +02:00
Daniel Schaefer
3f192ac80c Add builtins.hashFile
For text files it is possible to do it like so:
`builtins.hashString "sha256" (builtins.readFile /tmp/a)`
but that doesn't work for binary files.

With builtins.hashFile any kind of file can be conveniently hashed.
2019-05-03 17:23:36 +02:00
Niklas Hambüchen
288f93cec0 manual: "Nix Package collection" -> "Nixpkgs package collection".
Makes difference between Nix and Nixpkgs clearer to avoid
some common confusion this sentence on IRC.

Also disambiguate an "it" reference.
2019-04-14 03:20:57 +02:00
Niklas Hambüchen
caa76c369a docs: Mention --max-jobs 0 to build remotely only 2019-03-31 03:57:45 +02:00
Dmitry Kalinkin
75ec68f93a
manual: mention the "channel:" shorthand for NIX_PATH
Bumped to 15.09 because older channels, when downloaded from
nixos.org, require firefox to be accessed via `pkgs.firefox`
2019-03-25 20:55:28 -04:00
zimbatm
514b3c7f83
Add isPath primop
this is added for completeness' sake since all the other possible
`builtins.typeOf` results have a corresponding `builtins.is<Type>`
2019-03-24 11:36:49 +01:00
Linus Heckemann
6f093073b6 manual: include builtins.* for globally available builtins
This improves searchability.
2019-03-21 09:37:22 +01:00
Joachim Breitner
684c7fff80 Link to builders-use-substitutes in chapter on distributed builds
fixes #2730.
2019-03-16 19:03:40 +01:00
Andreas Rammhold
34fade478a
docs: fix typo in AllowDirectReads
It was just missing an `l` but should be fixed anyway.
2019-03-14 23:51:18 +01:00
Vladimír Čunát
4cfc131ec4
manual nitpick: document sha512 support in hashString 2019-03-01 14:30:30 +01:00
Spencer Baugh
5f1891b795 nix-store: make --dump-db take a list of paths to dump
Inside a derivation, exportReferencesGraph already provides a way to
dump the Nix database for a specific closure. On the command line,
--dump-db gave us the same information, but only for the entire Nix
database at once.

With this change, one can now pass a list of paths to --dump-db to get
the Nix database dumped for just those paths. (The user is responsible
for ensuring this is a closure, like for --export).

Among other things, this is useful for deploying a closure to a new
host without using --import/--export; one can use tar to transfer the
store paths, and --dump-db/--load-db to transfer the validity
information. This is useful if the new host doesn't actually have Nix
yet, and the closure that is being deployed itself contains Nix.
2019-01-23 01:24:34 +00:00
Domen Kožar
92d08c02c8
Merge pull request #2635 from veprbl/patch-7
manual: "sandbox" option default is "true" on Linux
2019-01-20 09:43:26 +07:00
Dmitry Kalinkin
15efd54373
manual: "sandbox" option default is "true" on Linux
Fixes: 812e39313c ('Enable sandboxing by default')
2019-01-19 15:04:43 -05:00
Samuel Evans-Powell
2ae5624b2f Update instructions for Haskell script using nix-shell interpreter
- The instructions for using nix-shell as an interpreter has a Haskell script
  example that doesn't work on more recent versions of Nix. Update the
  instructions with a working command
2019-01-18 10:50:54 +10:00
Eelco Dolstra
bbaf865655 Add 2.2 release notes 2019-01-10 21:02:09 +01:00
John Ericson
2733287046 Don't look for a "pv" program, or mention it in the manual source
The manual reference was commented out, and the sole reference to this
program other than the configure script. Removed both.
2019-01-07 16:40:19 -05:00
Patrick Hilhorst
567941fb59
Clarify nix-instantiate --read-write-mode 2018-12-14 09:36:40 +01:00
Eelco Dolstra
c37e6d77ea
Merge pull request #2569 from veprbl/pr/update_prerequisites
docs: add missing prerequisites: brotli, boost, libseccomp
2018-12-13 10:42:02 +01:00
Dmitry Kalinkin
0cc4728f71
docs: raise minimal boost version to 1.66 2018-12-13 01:50:39 -05:00
Dmitry Kalinkin
419949bf61
docs: add missing prerequisites: brotli, boost, libseccomp 2018-12-10 12:37:15 -05:00
Daiderd Jordan
77cc632186
s3: document scheme query parameter 2018-12-08 00:15:00 +01:00
Eelco Dolstra
6c6bbeb439 Merge branch 'feature/editline-pr' of https://github.com/dtzWill/nix 2018-11-13 20:42:13 +01:00
Felix C. Stegerman
fb2c21f71c
manual: quote $servlets 2018-11-13 01:18:26 +01:00
Felix C. Stegerman
18215be59d
fix typo (s/gift/git/) 2018-11-12 17:50:39 +01:00
Eelco Dolstra
b05d6dac7b
Manual: build locally -> build 2018-11-09 16:08:36 +01:00
Eelco Dolstra
4ea4d0b1a3
Urgh 2018-11-09 10:29:16 +01:00
Linus Heckemann
34d2948f21 Fix manual build
This was broken by some missing closing tags in 0bea4a50e0
2018-11-08 14:07:19 +01:00
Eelco Dolstra
750400e0fa
Merge pull request #2524 from domenkozar/deprecate-toPath
Deprecate builtins.toPath
2018-11-08 13:22:21 +01:00
Domen Kožar
0bea4a50e0
Deprecate builtins.toPath 2018-11-08 12:03:50 +00:00
Eelco Dolstra
812e39313c
Enable sandboxing by default
Closes #179.
2018-11-07 17:08:28 +01:00
Eelco Dolstra
5a3f140856
Document allowSubstitutes 2018-11-07 11:42:22 +01:00
Eelco Dolstra
1109193ea3
Fix preferLocalBuild description
preferLocalBuild does not in fact prevent substitution.
2018-11-07 11:37:43 +01:00
Will Dietz
3d974d31fa editline: wip 2018-10-29 08:44:58 -05:00
Antoine Eiche
73c2ae43f0 Add --graphml option to the nix-store --query command
This prints the references graph of the store paths in the graphML
format [1]. The graphML format is supported by several graph tools
such as the Python Networkx library or the Apache Thinkerpop project.

[1] http://graphml.graphdrawing.org
2018-10-20 09:48:34 +02:00
Benjamin Hipple
65453e2d77 Docs: update fixed output hashes
`fetchurl` will now throw if given an `md5`, and the hashes have generally
been upgraded to avoid it and use `sha256` as a default. This updates the
documentation examples in the manual accordingly.
2018-10-04 02:37:15 +00:00
Profpatsch
05cfc71cab manual: add XML IDs to all builtin list entries 2018-10-02 15:38:16 +02:00
Eelco Dolstra
aa5e47b2f4
Merge pull request #2456 from grahamc/s3-substituters
Update docs to describe how s3:// URLS does in fact support endpoint, region, and profile for upload
2018-10-01 22:47:00 +02:00
Eelco Dolstra
5b7cfa487e
Add missing file 2018-10-01 11:58:54 +02:00
Eelco Dolstra
1e7b8deea7
Check requiredSystemFeatures for local builds
For example, this prevents a "kvm" build on machines that don't have
KVM.

Fixes #2012.
2018-09-28 16:10:27 +02:00
Graham Christensen
51cbeec49a
Update docs to describe how s3:// URLS does in fact support endpoint, region, and profile for upload 2018-09-27 17:01:39 -04:00
Eelco Dolstra
a48c2e3411
Merge pull request #2434 from grahamc/graham-improve-upgrade
Upgrade docs: improve the upgrade command
2018-09-19 21:53:50 +02:00
Anders Riutta
1915862767
Upgrade docs: improve the upgrade command
and make it more copy-pastable.
2018-09-19 14:17:06 -04:00
Graham Christensen
be9e356e61
nix-shell: document double quotes being necessary for a simple Nix expression in the shebang 2018-09-19 13:01:27 -04:00
Graham Christensen
10a7f19937
nix-shell: explain the merging property close to the example 2018-09-19 12:48:08 -04:00
Graham Christensen
0cd863197b
docs: document deprecated aliases 2018-09-18 12:23:32 -04:00
Graham Christensen
0aca1ffb6e Prefer 'remote builder' over 'slave' 2018-09-10 18:57:46 +02:00
Vladimír Čunát
5f3b72cfc2
docs: change expired bzip2.org to archive.org
Fixes #2396.
2018-09-03 17:57:13 +02:00
Eelco Dolstra
4dd09210d7
Release notes tweaks 2018-09-02 21:47:10 +02:00
Eelco Dolstra
1f49926601
Merge pull request #2388 from grahamc/graham/document-multi-user
Document multi-user installation, and add release notes about it not being the default on 2.1
2018-09-01 22:43:48 +02:00
Graham Christensen
c42eaaf684
Create upgrade notes 2018-09-01 15:35:46 -04:00
Eelco Dolstra
c5ab07ec2b
Merge pull request #2168 from grahamc/explain-why-netrc-is-busted
manual: document why ~/.netrc doesn't work
2018-09-01 21:25:04 +02:00
Eelco Dolstra
51003f892d
Merge pull request #2309 from symphorien/disallowed-man
add manual entries for disallowedRequisites and disallowedReferences
2018-09-01 21:01:41 +02:00
Eelco Dolstra
291f67aecf
Merge pull request #2237 from nh2/patch-1
manual: distributed-builds: Mention - as default
2018-09-01 20:41:49 +02:00
Graham Christensen
4be7652dd3
release notes: note that the multi-user installer is available but not selected for Linux with systemd, and the bug about selinux 2018-09-01 10:45:57 -04:00
Graham Christensen
c3e508d924
Document the multi-user installer some
Use sh <(...) syntax for installation to preserve stdin and prompting

also update installation docs to account for changes in multi-user selection
2018-09-01 10:45:50 -04:00
Graham Christensen
f66fa7cd20
We support aarch64 now 2018-09-01 10:44:33 -04:00
Eelco Dolstra
6ed4a6bd0e
Merge pull request #2384 from graham-at-target/fetch-git-examples
docs: Add some examples to fetchGit
2018-09-01 14:08:32 +02:00
Graham Christensen
0b7568fb73
Drop ssh://... as a required formatting for builtins.fetchGit 2018-08-31 19:49:56 -04:00
Eelco Dolstra
4095cd6438
Add contributors 2018-09-01 00:01:05 +02:00
Graham Christensen
149d10c308 docs: Add IDs to important sections 2018-08-31 10:06:33 -04:00
Graham Christensen
2df21b78b9 docs: Add some examples to fetchGit 2018-08-31 10:00:32 -04:00
Eelco Dolstra
308689f94b
Merge pull request #2365 from erikarvstedt/fix-docs
Docs: Fix install prefix
2018-08-30 16:24:52 +02:00
Eelco Dolstra
64d7d1a884
Update release notes 2018-08-30 15:28:18 +02:00
Domen Kožar
d16ff76c69
nix.conf: clarify -j0 doesn't affect preferLocalBuild 2018-08-29 14:33:14 +01:00
Domen Kožar
54df4bb0b5
nix.conf: mention -j0 is useful 2018-08-29 11:51:51 +01:00
Erik Arvstedt
8ad2defdf0 Docs: Fix install prefix
shell.nix defines the install prefix as $(pwd)/inst
2018-08-21 21:46:43 +02:00
Graham Christensen
06080e4abc
2.1 release notes: Add note about s3-compatible stores 2018-08-03 11:09:31 -04:00
Eelco Dolstra
87356cc8a4
Add Nix 2.1 release notes 2018-08-03 17:05:17 +02:00
Eelco Dolstra
122e1a61f8
Merge pull request #2323 from samueldr/feature/selective-impurity
Allows selectively adding environment variables to pure shells.
2018-08-03 16:58:18 +02:00
Samuel Dionne-Riel
438e02529d Allows selectively adding environment variables to pure shells.
Includes documentation and test.
2018-08-02 08:21:30 -04:00
Graham Christensen
49a53c1d3f s3 binary cache: support specifying an endpoint
Works for uploading and not downloading.
2018-08-02 08:19:50 -04:00
Graham Christensen
b27431b7cb Document s3 substitutions 2018-08-01 11:07:41 -04:00
Symphorien Gibol
81d1385437 add manual entries for disallowedRequisites and disallowedReferences 2018-07-26 18:14:50 +02:00
Nathan van Doorn
41f38fbb4b
nix-channel documentation: don't suggest deprecated function
Running `nix-instantiate --eval -E '(import <nixpkgs> {}).lib.nixpkgsVersion` emits a warning
```
trace: `lib.nixpkgsVersion` is deprecated, use `lib.version` instead!
```
2018-07-16 10:00:42 +01:00
Niklas Hambüchen
10ebcf8670
manual: distributed-builds: Mention - as default 2018-06-17 19:01:07 +02:00
Michael Raskin
17bc757980 manual: builtins.fromJSON: remove the claim that floats are not allowed
floating-point numbers are supported now, including the fromJSON
builtin. Reported on IRC by inquisitiv3
2018-06-10 14:20:18 +02:00
Peter Simons
93aa3bea2e
Merge pull request #767 from mogorman/garbage_collect_keep_last_few
Implement --delete-generations + flag for keeping last N number of gens
2018-05-31 10:00:21 +02:00
Shea Levy
bbbfc180d9
Explicitly describe the effects of filterSource excluding a directory. 2018-05-30 12:34:41 -04:00
Graham Christensen
f9940f47b3
Merge pull request #2164 from mickours/doc-fetchTarball-timout
Explain fetchTarball timeout behavior in the doc
2018-05-30 08:04:26 -04:00
Michael Mercier
8dd2e28374
Explain fetchTarball timeout behavior in the doc 2018-05-30 08:02:46 -04:00
Graham Christensen
e6466c20b3
Document NIX_SSL_CERT_FILE for installation 2018-05-25 15:59:14 -04:00
Eelco Dolstra
743359bc8a
Merge pull request #2157 from volth/bitwise
add builtins: __bitAnd,  __bitOr,  __bitXor
2018-05-24 15:00:39 +02:00
volth
88c1ea30e4 add docs and tests 2018-05-24 12:51:34 +00:00
Alexandre Esteves
579f3895b4
Fix docs on --check suffix 2018-05-23 22:26:06 +01:00
Graham Christensen
33712fed38
manual: document why ~/.netrc doesn't work
Maybe there is a better place to document this, which is more generic?
2018-05-18 14:21:47 -04:00
Gleb Peregud
5ba6395378 docs: mention source of env variables used by impureEnvVars. 2018-05-02 22:45:20 +02:00
Danylo Hlynskyi
ac22d77fd1 nix-collect-garbage: little doc fix
This removes confusing documentation. It's better to remove doc than add implementation, because Nix 1.12 will surely have new GC interface anyway.

Fixes https://github.com/NixOS/nix/issues/641
2018-04-30 09:36:46 -07:00