`-u'. Instead of acquiring an exclusive lock on the profile for the
entire duration of the operation, we just perform the operation
optimistically (without an exclusive lock), and check at the end
whether the profile changed while we were busy (i.e., the symlink
target changed). If so, the operation is restarted. Restarting is
generally cheap, since the build results are still in the Nix store.
Most of the time, only the user environment has to be rebuilt.
again. (After the previous substituter mechanism refactoring I
didn't update the code that obtains the references of substitutable
paths.) This required some refactoring: the substituter programs
are now kept running and receive/respond to info requests via
stdin/stdout.
it only does something if $NIX_OTHER_STORES (not really a good
name...) is set.
* Do globbing on the elements of $NIX_OTHER_STORES. E.g. you could
set it to /mnts/*/nix or something.
* Install substituters in libexec/nix/substituters.
logic through the `parseDrvName' and `compareVersions' primops.
This will allow expressions to easily check whether some dependency
is a specific needed version or falls in some version range. See
tests/lang/eval-okay-versions.nix for examples.
bytes have been freed, `--max-links' to stop when the Nix store
directory has fewer than N hard links (the latter being important
for very large Nix stores on filesystems with a 32000 subdirectories
limit).
store under the reference relation, since that means that the
garbage collector will need a long time to start deleting paths.
Instead just delete the referrers of a path first.
This isn't usually a problem, except that it causes tests to fail
when performed in a directory with a very long path name. So chdir
to the socket directory and use a relative path name.
/tmp/nix-<pid>-<counter> for temporary build directories. This
increases purity a bit: many packages store the temporary build path
in their output, causing (generally unimportant) binary differences.
undefined variables by definition. This matters for the
implementation of "with", which does a call to checkVarDefs to see
if the body of the with has no undefined variables. (It can't be
checked at parse time because you don't know which variables are in
the "with" attribute set.) If we check closed terms, then we check
not just the with body but also the substituted terms, which are
typically very large. This is the cause of the poor nix-env
performance on Nixpkgs lately. It didn't happen earlier because
"with" wasn't used very often in the past.
This fix improves nix-env performance roughly 60x on current Nixpkgs.
nix-env -qa is down from 29.3s to 0.5s on my laptop, and nix-env -qa
--out-path is down from 229s to 3.39s. Not bad for a 1-line fix :-)
single quotes. Example (from NixOS):
job = ''
start on network-interfaces
start script
rm -f /var/run/opengl-driver
${if videoDriver == "nvidia"
then "ln -sf ${nvidiaDrivers} /var/run/opengl-driver"
else if cfg.driSupport
then "ln -sf ${mesa} /var/run/opengl-driver"
else ""
}
rm -f /var/log/slim.log
end script
'';
This style has two big advantages:
- \, ' and " aren't special, only '' and ${. So you get a lot less
escaping in shell scripts / configuration files in Nixpkgs/NixOS.
The delimiter '' is rare in scripts (and can usually be written as
""). ${ is also fairly rare.
Other delimiters such as <<...>>, {{...}} and <|...|> were also
considered but this one appears to have the fewest drawbacks
(thanks Martin).
- Indentation is intelligently stripped so that multi-line strings
can follow the nesting structure of the containing Nix
expression. E.g. in the example above 6 spaces are stripped from
the start of each line. This prevents unnecessary indentation in
generated files (which sometimes even breaks things).
See tests/lang/eval-okay-ind-string.nix for some examples.
$ nix-env -e $(which firefox)
or
$ nix-env -e /nix/store/nywzlygrkfcgz7dfmhm5xixlx1l0m60v-pan-0.132
* nix-env -i: if an argument contains a slash anywhere, treat it as a
path and follow it through symlinks into the Nix store. This allows
things like
$ nix-build -A firefox
$ nix-env -i ./result
* nix-env -q/-i/-e: don't complain when the `*' selector doesn't match
anything. In particular, `nix-env -q \*' doesn't fail anymore on an
empty profile.
but installations/upgrades as well. So `nix-env -ub \*' will
upgrade only those packages for which a substitute is available (or
to be precise, it will upgrade each package to the highest version
for which a substitute is available).
executed in a chroot that contains just the Nix store, the temporary
build directory, and a configurable set of additional directories
(/dev and /proc by default). This allows a bit more purity
enforcement: hidden build-time dependencies on directories such as
/usr or /nix/var/nix/profiles are no longer possible. As an added
benefit, accidental network downloads (cf. NIXPKGS-52) are prevented
as well (because files such as /etc/resolv.conf are not available in
the chroot).
However the usefulness of chroots is diminished by the fact that
many builders depend on /bin/sh, so you need /bin in the list of
additional directories. (And then on non-NixOS you need /lib as
well...)
usage by finding identical files in the store and hard-linking them
to each other. It typically reduces the size of the store by
something like 25-35%. This is what the optimise-store.pl script
did, but the new command is faster and more correct (it's safe wrt
garbage collection and concurrent builds).
the given attribute path (just as -A does with other option)
(NIX-83). So you can now say
$ nix-env -qa -A nixpkgs_unstable.gnome \*
atk-1.12.4
esound-0.2.36
...
to see the packages in the "gnome" attribute in Nixpkgs.
To *print* the attribute path, you should now use "--attr-path" /
"-P" (running out of letters...).
Nix expressions in that directory are combined into an attribute set
{file1 = import file1; file2 = import file2; ...}, i.e. each Nix
expression is an attribute with the file name as the attribute
name. Also recurses into directories.
* nix-env: removed the "--import" (-I) option which set the
~/.nix-defexpr symlink.
* nix-channel: don't use "nix-env --import", instead symlink
~/.nix-defexpr/channels. So finally nix-channel --update doesn't
override any default Nix expressions but combines with them.
This means that you can have (say) a local Nixpkgs SVN tree and use
it as a default for nix-env:
$ ln -s .../path-to-nixpkgs-tree ~/.nix-defexpr/nixpkgs_svn
and be subscribed to channels (including Nixpkgs) at the same time.
(If there is any ambiguity, the -A flag can be used to
disambiguate, e.g. "nix-env -i -A nixpkgs_svn.pan".)
(/nix/var/nix/daemon-socket). This allows access to the Nix daemon
to be restricted by setting the mode/ownership on that directory as
desired, e.g.
$ chmod 770 /nix/var/nix/daemon-socket
$ chown root.wheel /nix/var/nix/daemon-socket
to allow only users in the wheel group to use Nix.
Setting the ownership on a socket is much trickier, since the socket
must be deleted and recreated every time the daemon is started
(which would require additional Nix configuration file directives to
specify the mode/ownership, and wouldn't support arbitrary ACLs),
some BSD variants appear to ignore permissions on sockets, and it's
not clear whether the umask is respected on every platform when
creating sockets.
fixed-output derivations or substitutions try to build the same
store path at the same time. Locking generally catches this, but
not between multiple goals in the same process. This happened
especially often (actually, only) in the build farm with fetchurl
downloads of the same file being executed on multiple machines and
then copied back to the main machine where they would clobber each
other (NIXBF-13).
Solution: if a goal notices that the output path is already locked,
then go to sleep until another goal finishes (hopefully the one
locking the path) and try again.
need any info on substitutable paths, we just call the substituters
(such as download-using-manifests.pl) directly. This means that
it's no longer necessary for nix-pull to register substitutes or for
nix-channel to clear them, which makes those operations much faster
(NIX-95). Also, we don't have to worry about keeping nix-pull
manifests (in /nix/var/nix/manifests) and the database in sync with
each other.
The downside is that there is some overhead in calling an external
program to get the substitutes info. For instance, "nix-env -qas"
takes a bit longer.
Abolishing the substitutes table also makes the logic in
local-store.cc simpler, as we don't need to store info for invalid
paths. On the downside, you cannot do things like "nix-store -qR"
on a substitutable but invalid path (but nobody did that anyway).
* Never catch interrupts (the Interrupted exception).
;-)
* Channels: fix channels that are plain lists of derivations (like
strategoxt-unstable) instead of functions (like nixpkgs-unstable).
This fixes the error message "error: the left-hand side of the
function call is neither a function nor a primop (built-in
operation) but a list".
get the basename of the channel URL (e.g., nixpkgs-unstable). The
top-level Nix expression of the channel is now an attribute set, the
attributes of which are the individual channels (e.g.,
{nixpkgs_unstable = ...; strategoxt_unstable = ...}). This makes
attribute paths ("nix-env -qaA" and "nix-env -iA") more sensible,
e.g., "nix-env -iA nixpkgs_unstable.subversion".
by priority and version install. That is, if there are multiple
packages with the same name, then pick the package with the highest
priority, and only use the version if there are multiple packages
with the same priority.
This makes it possible to mark specific versions/variant in Nixpkgs
more or less desirable than others. A typical example would be a
beta version of some package (e.g., "gcc-4.2.0rc1") which should not
be installed even though it is the highest version, except when it
is explicitly selected (e.g., "nix-env -i gcc-4.2.0rc1").
* Idem for nix-env -u, only the semantics are a bit trickier since we
also need to take into account the priority of the currently
installed package (we never upgrade to a lower priority, unless
--always is given).
a user environment by an install or upgrade action. This is
particularly useful if you have a version installed that you don't
want to upgrade (e.g., because the newer versions are broken).
Example:
$ nix-env -u zapping --dry-run
(dry run; not doing anything)
upgrading `zapping-0.9.6' to `zapping-0.10cvs6'
$ nix-env --set-flag keep true zapping
$ nix-env -u zapping --dry-run
(dry run; not doing anything)
However, "-e" will still uninstall the package. (Maybe we should
require the keep flag to be explicitly set to false before it can be
uninstalled.)
to show only those derivations whose output is already in the Nix
store or that can be substituted (i.e., downloaded from somewhere).
In other words, it shows the packages that can be installed “quickly”,
i.e., don’t need to be built from source.
evaluator. This was important because the NixOS expressions started
to hit 2 MB default stack size on Linux.
GCC is really dumb about stack space: it just adds up all the local
variables and temporaries of every scope into one huge stack frame.
This is really bad for deeply recursive functions. For instance,
every `throw Error(format("error message"))' causes a format object
of a few hundred bytes to be allocated on the stack. As a result,
every recursive call to evalExpr2() consumed 4680 bytes. By
splitting evalExpr2() and by moving the exception-throwing code out
of the main functions, evalExpr2() now only consumes 40 bytes.
Similar for evalExpr().
which paths specified on the command line are invalid (i.e., don't
barf when encountering an invalid path, just print it). This is
useful for build-remote.pl to figure out which paths need to be
copied to a remote machine. (Currently we use rsync, but that's
rather inefficient.)
--export' into the Nix store, and optionally check the cryptographic
signatures against /nix/etc/nix/signing-key.pub. (TODO: verify
against a set of public keys.)
path. This is like `nix-store --dump', only it also dumps the
meta-information of the store path (references, deriver). Will add
a `--sign' flag later to add a cryptographic signature, which we
will use for exchanging store paths between build farm machines in a
secure manner.
attribute) about installed packages in user environments. Thus, an
operation like `nix-env -q --description' shows useful information
not only on available packages but also on installed packages.
* nix-env now passes the entire manifest as an argument to the Nix
expression of the user environment builder (not just a list of
paths), so that in particular the user environment builder has
access to the meta attributes.
* New operation `--set-flag' in nix-env to change meta info of
installed packages. This will be useful to pass per-package
policies to the user environment builder (e.g., how to resolve
collision or whether to disable a package (NIX-80)) or upgrade
policies in nix-env (e.g., that a package should be "masked", that
is, left untouched by upgrade actions). Example:
$ nix-env --set-flag enabled false ghc-6.4
computing the store path (NIX-77). This is an important security
property in multi-user Nix stores.
Note that this changes the store paths of derivations (since the
derivation aterms are added using addTextToStore), but not most
outputs (unless they use builtins.toFile).
* `sub' to subtract two numbers.
* `stringLength' to get the length of a string.
* `substring' to get a substring of a string. These should be enough
to allow most string operations to be expressed.
programs, so if a builder uses TMPDIR, then it will fail when
executed through nix-setuid-helper. In fact Glibc clears a whole
bunch of variables (see sysdeps/generic/unsecvars.h in the Glibc
sources), but only TMPDIR should matter in practice. As a
workaround, we reinitialise TMPDIR from NIX_BUILD_TOP.
important to get garbage collection to work if there is any
inconsistency in the database (because the referrer table is used to
determine whether it is safe to delete a path).
* `nix-store --verify': show some progress.
* nix-unpack-closure: extract the top-level paths from the closure and
print them on stdout. This allows them to be installed, e.g.,
"nix-env -i $(nix-unpack-closure)". (NIX-64)
<derivation outPath=... drvPath=...> attrs </derivation>. Only emit
the attributes of any specific derivation only. This prevents
exponententially large XML output due to the absense of sharing.
from a source directory. All files for which a predicate function
returns true are copied to the store. Typical example is to leave
out the .svn directory:
stdenv.mkDerivation {
...
src = builtins.filterSource
(path: baseNameOf (toString path) != ".svn")
./source-dir;
# as opposed to
# src = ./source-dir;
}
This is important because the .svn directory influences the hash in
a rather unpredictable and variable way.
single derivation specified by the argument. This is useful when we
want to have a profile for a single derivation, such as a server
configuration. Then we can just say (e.g.)
$ nix-env -p /.../server-profile -f server.nix --set -A server
We can't do queries or upgrades on such a profile, but we can do
rollbacks. The advantage over -i is that we don't have to worry
about other packages having been installed in the profile
previously; --set gets rid of them.
matters when running as root, since then we don't use the setuid
helper (which already used lchown()).
* Also check for an obscure security problem on platforms that don't
have lchown. Then we can't change the ownership of symlinks, which
doesn't matter *except* when the containing directory is writable by
the owner (which is the case with the top-level Nix store directory).
* Throw more exceptions as BuildErrors instead of Errors. This
matters when --keep-going is turned on. (A BuildError is caught
and terminates the goal in question, an Error terminates the
program.)
seconds without producing output on stdout or stderr (NIX-65). This
timeout can be specified using the `--max-silent-time' option or the
`build-max-silent-time' configuration setting. The default is
infinity (0).
* Fix a tricky race condition: if we kill the build user before the
child has done its setuid() to the build user uid, then it won't be
killed, and we'll potentially lock up in pid.wait(). So also send a
conventional kill to the child.
