This is already used by Hydra, and is very useful when materializing
a remote builder list from service discovery. This allows the service
discovery tool to only sync one file instead of two.
This is technically a breaking change, since attempting to set plugin
files after the first non-flag argument will now throw an error. This
is acceptable given the relative lack of stability in a plugin
interface and the need to tie the knot somewhere once plugins can
actually define new subcommands.
This field used to be a `BasicDerivation`, but this `BasicDerivation`
was downcasted to a `Derivation` when needed (implicitely or not), so we
might as well make it a full `Derivation` and upcast it when needed.
This also allows getting rid of a weird duplication in the way we
compute the static output hashes for the derivation. We had to
do it differently and in a different place depending on whether the
derivation was a full derivation or just a basic drv, but we can now do
it unconditionally on the full derivation.
Fix#4559
- Pass it the name of the outputs rather than their output paths (as
these don't exist for ca derivations)
- Get the built output paths from the remote builder
- Register the new received realisations
When performing distributed builds of machine learning packages, it
would be nice if builders without the required SIMD instructions can
be excluded as build nodes.
Since x86_64 has accumulated a large number of different instruction
set extensions, listing all possible extensions would be unwieldy.
AMD, Intel, Red Hat, and SUSE have recently defined four different
microarchitecture levels that are now part of the x86-64 psABI
supplement and will be used in glibc 2.33:
https://gitlab.com/x86-psABIs/x86-64-ABIhttps://lwn.net/Articles/844831/
This change uses libcpuid to detect CPU features and then uses them to
add the supported x86_64 levels to the additional system types. For
example on a Ryzen 3700X:
$ ~/aps/bin/nix -vv --version | grep "Additional system"
Additional system types: i686-linux, x86_64-v1-linux, x86_64-v2-linux, x86_64-v3-linux
That way we
1. Don't have to recompute them several times
2. Can compute them in a place where we know the type of the parent
derivation, meaning that we don't need the casting dance we had before
Once a build is done, get back to the original derivation, and register
all the newly built outputs for this derivation.
This allows Nix to work properly with derivations that don't have all
their build inputs available − thus allowing garbage collection and
(once it's implemented) binary substitution
In addition to being some ugly template trickery, it was also totally
useless as it was used in only one place where I could replace it by
just a few extra characters
Where a `RealisedPath` is a store path with its history, meaning either
an opaque path for stuff that has been directly added to the store, or a
`Realisation` for stuff that has been built by a derivation
This is a low-level refactoring that doesn't bring anything by itself
(except a few dozen extra lines of code :/ ), but raising the
abstraction level a bit is important on a number of levels:
- Commands like `nix build` have to query for the realisations after the
build is finished which is fragile (see
27905f12e4a7207450abe37c9ed78e31603b67e1 for example). Having them
oprate directly at the realisation level would avoid that
- Others like `nix copy` currently operate directly on (built) store
paths, but need a bit more information as they will need to register
the realisations on the remote side
Fix a mismatch in the errors thrown when a needed output was missing
from an input derivation that was leading to a wrong and quite misleading error
message
Don't only show the name of the output, but also the derivation to which
this output belongs (as otherwise it's very hard to track back what went
wrong)
Changes:
* The divider lines are gone. These were in practice a bit confusing,
in particular with --show-trace or --keep-going, since then there
were multiple lines, suggesting a start/end which wasn't the case.
* Instead, multi-line error messages are now indented to align with
the prefix (e.g. "error: ").
* The 'description' field is gone since we weren't really using it.
* 'hint' is renamed to 'msg' since it really wasn't a hint.
* The error is now printed *before* the location info.
* The 'name' field is no longer printed since most of the time it
wasn't very useful since it was just the name of the exception (like
EvalError). Ideally in the future this would be a unique, easily
googleable error ID (like rustc).
* "trace:" is now just "…". This assumes error contexts start with
something like "while doing X".
Example before:
error: --- AssertionError ---------------------------------------------------------------------------------------- nix
at: (7:7) in file: /home/eelco/Dev/nixpkgs/pkgs/applications/misc/hello/default.nix
6|
7| x = assert false; 1;
| ^
8|
assertion 'false' failed
----------------------------------------------------- show-trace -----------------------------------------------------
trace: while evaluating the attribute 'x' of the derivation 'hello-2.10'
at: (192:11) in file: /home/eelco/Dev/nixpkgs/pkgs/stdenv/generic/make-derivation.nix
191| // (lib.optionalAttrs (!(attrs ? name) && attrs ? pname && attrs ? version)) {
192| name = "${attrs.pname}-${attrs.version}";
| ^
193| } // (lib.optionalAttrs (stdenv.hostPlatform != stdenv.buildPlatform && !dontAddHostSuffix && (attrs ? name || (attrs ? pname && attrs ? version)))) {
Example after:
error: assertion 'false' failed
at: (7:7) in file: /home/eelco/Dev/nixpkgs/pkgs/applications/misc/hello/default.nix
6|
7| x = assert false; 1;
| ^
8|
… while evaluating the attribute 'x' of the derivation 'hello-2.10'
at: (192:11) in file: /home/eelco/Dev/nixpkgs/pkgs/stdenv/generic/make-derivation.nix
191| // (lib.optionalAttrs (!(attrs ? name) && attrs ? pname && attrs ? version)) {
192| name = "${attrs.pname}-${attrs.version}";
| ^
193| } // (lib.optionalAttrs (stdenv.hostPlatform != stdenv.buildPlatform && !dontAddHostSuffix && (attrs ? name || (attrs ? pname && attrs ? version)))) {
This change is to simplify [Trustix](https://github.com/tweag/trustix) indexing and makes it possible to reconstruct this URL regardless of the compression used.
In particular this means that 7c2e9ca597/contrib/nix/nar/nar.go (L61-L71) can be removed and only the bits that are required to establish trust needs to be published in the Trustix build logs.
With the `ca-derivation` experimental features, non-ca derivations used
to have their output paths returned as unknown as long as they weren't
built (because of a mistake in the code that systematically erased the
previous value)
Thanks @regnat and @edolstra for catching this and comming up with the
solution.
They way I had generalized those is wrong, because local settings for
non-local stores is confusing default. And due to the nature of C++
inheritance, fixing the defaults is more annoying than it should be.
Additionally, I thought we might just drop the check in the substitution
logic since `Store::addToStore` is now streaming, but @regnat rightfully
pointed out that as it downloads dependencies first, that would still be
too late, and also waste effort on possibly unneeded/unwanted
dependencies.
The simple and correct thing to do is just make a store method for the
boolean logic, keeping all the setting and key stuff the way it was
before. That new method is both used by `LocalStore::addToStore` and the
substitution goal check. Perhaps we might eventually make it fancier,
e.g. sending the ValidPathInfo to remote stores for them to validate,
but this is good enough for now.
By default, once you enter x86_64 Rosetta 2, macOS will try to run
everything in x86_64. So an x86_64 Nix will still try to use x86_64
even when system = aarch64-darwin. To avoid this we can set
kern.curproc_arch_affinity sysctl. With kern.curproc_arch_affinity=0,
we ignore this preference.
This is based on how
https://opensource.apple.com/source/system_cmds/system_cmds-880.40.5/arch.tproj/arch.c.auto.html
works. Completely undocumented, but seems to work!
Note, you can verify this works with this impure Nix expression:
```
{
a = derivation {
name = "a";
system = "aarch64-darwin";
builder = "/bin/sh";
args = [ "-e" (builtins.toFile "builder" ''
[ "$(/usr/bin/arch)" = arm64 ]
[ "$(/usr/bin/arch -arch x86_64 /bin/sh -c /usr/bin/arch)" = i386 ]
[ "$(/usr/bin/arch -arch arm64 /bin/sh -c /usr/bin/arch)" = arm64 ]
/usr/bin/touch $out
'') ];
};
b = derivation {
name = "b";
system = "x86_64-darwin";
builder = "/bin/sh";
args = [ "-e" (builtins.toFile "builder" ''
[ "$(/usr/bin/arch)" = i386 ]
[ "$(/usr/bin/arch -arch x86_64 /bin/sh -c /usr/bin/arch)" = i386 ]
[ "$(/usr/bin/arch -arch arm64 /bin/sh -c /usr/bin/arch)" = arm64 ]
/usr/bin/touch $out
'') ];
};
}
```
This resolves#3810 by changing the behavior of `max-jobs = 0`, so
that specifying the option also avoids local building of derivations
with the attribute `preferLocalBuild = true`.
We embrace virtual the rest of the way, and get rid of the
`assert(false)` 0-param constructors.
We also list config base classes first, so the constructor order is
always:
1. all the configs
2. all the stores
Each in the same order
PRs #4370 and #4348 had a bad interaction in that the second broke the fist
one in a not trivial way.
The issue was that since #4348 the logic for detecting whether a
derivation output is already built requires some logic that was specific
to the `LocalStore`.
It happens though that most of this logic could be upstreamed to any `Store`,
which is what this commit does.
This ignore was here because `queryPartialDrvOutputMap` was used both
1. as a cache to avoid having to re-read the derivation (when gc-ing for
example), and
2. as the source of truth for ca realisations
The use-case 2. required it to be able to work even when the derivation
wasn't there anymore (see https://github.com/NixOS/nix/issues/4138).
However, this use-case is now handled by `queryRealisation`, meaning
that we can safely error out if the derivation isn't there anymore
`buildPaths` can be called even for stores where it's not defined in case it's
bound to be a no-op.
The “no-op detection” mechanism was only detecting the case wher `buildPaths`
was called on a set of (non-drv) paths that were already present on the store.
This commit extends this mechanism to also detect the case where `buildPaths`
is called on a set of derivation outputs which are already built on the store.
This only works with the ca-derivations flag. It could be possible to
extend this to also work without it, but it would add quite a bit of
complexity, and it's not used without it anyways.
Extend `FSAccessor::readFile` to allow not checking that the path is a
valid one, and rewrite `readInvalidDerivation` using this extended
`readFile`.
Several places in the code use `readInvalidDerivation`, either because
they need to read a derivation that has been written in the store but
not registered yet, or more generally to prevent a deadlock because
`readDerivation` tries to lock the state, so can't be called from a
place where the lock is already held.
However, `readInvalidDerivation` implicitely assumes that the store is a
`LocalFSStore`, which isn't always the case.
The concrete motivation for this is that it's required for `nix copy
--from someBinaryCache` to work, which is tremendously useful for the
tests.
Because of a too eager refactoring, `addTextToStore` used to throw an
error because the input wasn't a valid nar.
Partially revert that refactoring to wrap the text into a proper nar
(using `dumpString`) to make this method work again
Rather than storing the derivation outputs as `drvPath!outputName` internally,
store them as `drvHashModulo!outputName` (or `outputHash!outputName` for
fixed-output derivations).
This makes the storage slightly more opaque, but enables an earlier
cutoff in cases where a fixed-output dependency changes (but keeps the
same output hash) − same as what we already do for input-addressed
derivations.
Add a new table for tracking the derivation output mappings.
We used to hijack the `DerivationOutputs` table for that, but (despite its
name), it isn't a really good fit:
- Its entries depend on the drv being a valid path, making it play badly with
garbage collection and preventing us to copy a drv output without copying
the whole drv closure too;
- It dosen't guaranty that the output path exists;
By using a different table, we can experiment with a different schema better
suited for tracking the output mappings of CA derivations.
(incidentally, this also fixes#4138)
For each known realisation, store:
- its output
- its output path
This comes with a set of needed changes:
- New `realisations` module declaring the types needed for describing
these mappings
- New `Store::registerDrvOutput` method registering all the needed informations
about a derivation output (also replaces `LocalStore::linkDeriverToPath`)
- new `Store::queryRealisation` method to retrieve the informations for a
derivations
This introcudes some redundancy on the remote-store side between
`wopQueryDerivationOutputMap` and `wopQueryRealisation`.
However we might need to keep both (regardless of backwards compat)
because we sometimes need to get some infos for all the outputs of a
derivation (where `wopQueryDerivationOutputMap` is handy), but all the
stores can't implement it − because listing all the outputs of a
derivation isn't really possible for binary caches where the server
doesn't allow to list a directory.
In `nixStable` (2.3.7 to be precise) it's possible to connect to stores
using an IPv6 address:
nix ping-store --store ssh://root@2001:db8::1
This is also useful for `nixops(1)` where you could specify an IPv6
address in `deployment.targetHost`.
However, this behavior is broken on `nixUnstable` and fails with the
following error:
$ nix store ping --store ssh://root@2001:db8::1
don't know how to open Nix store 'ssh://root@2001:db8::1'
This happened because `openStore` from `libstore` uses the `parseURL`
function from `libfetchers` which expects a valid URL as defined in
RFC2732. However, this is unsupported by `ssh(1)`:
$ nix store ping --store 'ssh://root@[2001:db8::1]'
cannot connect to 'root@[2001:db8::1]'
This patch now allows both ways of specifying a store (`root@2001:db8::1`) and
also `root@[2001:db8::1]` since the latter one is useful to pass query
parameters to the remote store.
In order to achieve this, the following changes were made:
* The URL regex from `url-parts.hh` now allows an IPv6 address in the
form `2001:db8::1` and also `[2001:db8::1]`.
* In `libstore`, a new function named `extractConnStr` ensures that a
proper URL is passed to e.g. `ssh(1)`:
* If a URL looks like either `[2001:db8::1]` or `root@[2001:db8::1]`,
the brackets will be removed using a regex. No additional validation
is done here as only strings parsed by `parseURL` are expected.
* In any other case, the string will be left untouched.
* The rules above only apply for `LegacySSHStore` and `SSHStore` (a.k.a
`ssh://` and `ssh-ng://`).
Unresolved questions:
* I'm not really sure whether we want to allow both variants of IPv6
addresses in the URL parser. However it should be noted that both seem
to be possible according to RFC2732:
> This document incudes an update to the generic syntax for Uniform
> Resource Identifiers defined in RFC 2396 [URL]. It defines a syntax
> for IPv6 addresses and allows the use of "[" and "]" within a URI
> explicitly for this reserved purpose.
* Currently, it's not supported to specify a port number behind the
hostname, however it seems as this is not really supported by the URL
parser. Hence, this is probably out of scope here.
The `DerivationGoal` has a variable storing the “final” derivation
output paths that is used (amongst other things) to fill the environment
for the post build hook. However this variable wasn't set when the
build-hook is used, causing a crash when both hooks are used together.
Fix this by setting this variable (from the informations in the db) after a run
of the post build hook.
This reverts commit 1b1e076033.
Using `queryPartialDerivationOutputMap` assumes that the derivation
exists locally which isn't the case for remote builders.
Since 0744f7f, it is now useful to have cache.nixos.org in substituers
even if /nix/store is not the Nix Store Dir. This can always be
overridden via configuration, though.
When running universal binaries like /bin/bash, Darwin XNU will choose
which architecture of the binary to use based on "binary preferences".
This change sets that to the current platform for aarch64 and x86_64
builds. In addition it now uses posix_spawn instead of the usual
execve. Note, that this does not prevent the other architecture from
being run, just advises which to use.
Unfortunately, posix_spawnattr_setbinpref_np does not appear to be
inherited by child processes in x86_64 Rosetta 2 translations, meaning
that this will not always work as expected.
For example:
{
arm = derivation {
name = "test";
system = "aarch64-darwin";
builder = "/bin/bash";
args = [ "-e" (builtins.toFile "test" ''
set -x
/usr/sbin/sysctl sysctl.proc_translated
/usr/sbin/sysctl sysctl.proc_native
[ "$(/usr/bin/arch)" = arm64 ]
/usr/bin/touch $out
'') ];
};
rosetta = derivation {
name = "test";
system = "x86_64-darwin";
builder = "/bin/bash";
args = [ "-e" (builtins.toFile "test" ''
set -x
/usr/sbin/sysctl sysctl.proc_translated
/usr/sbin/sysctl sysctl.proc_native
[ "$(/usr/bin/arch)" = i386 ]
echo It works!
/usr/bin/touch $out
'') ];
};
}
`arm' fails on x86_64-compiled Nix, but `arm' and `rosetta' succeed on
aarch64-compiled Nix. I suspect there is a way to fix this since:
$ /usr/bin/arch -arch x86_64 /bin/bash \
-c '/usr/bin/arch -arch arm64e /bin/bash -c /usr/bin/arch'
arm64
seems to work correctly. We may need to wait for Apple to update
system_cmds in opensource.apple.com to find out how though.
macOS systems with ARM64 can utilize a translation layer at
/Library/Apple/usr/libexec/oah to run x86_64 binaries. This change
makes Nix recognize that and it to "extra-platforms". Note that there
are two cases here since Nix could be built for either x86_64 or
aarch64. In either case, we can switch to the other architecture.
Unfortunately there is not a good way to prevent aarch64 binaries from
being run in x86_64 contexts or vice versa - programs can always
execute programs for the other architecture.
If the build closure contains some CA derivations, then we can't know
ahead-of-time that we won't build anything as early-cutoff might come-in
at a laster stage
