... so that we may perhaps later extend the interface.
Note that Nixpkgs' lib.warn already requires a string coercible
argument, so this is reasonable. Also note that string coercible
values aren't all strings, but in practice, for warn, they are.
Fixes assertion failure if outputsToInstall is empty by defaulting to the "out"
output. That is, behavior between the following commands should be consistent:
$ nix build --no-link --json .#nothing-to-install-no-out
error: derivation '/nix/store/eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee-nothing-to-install-no-out.drv' does not have wanted outputs 'out'
$ nix build --no-link --file default.nix --json nothing-to-install-no-out
error: derivation '/nix/store/eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee-nothing-to-install-no-out.drv' does not have wanted outputs 'out'
Real-world example of this issue:
$ nix build --json .#.legacyPackages.aarch64-linux.texlive.pkgs.iwona
error: derivation '/nix/store/dj0h6b0pnlnan5nidnhqa0bmzq4rv6sx-iwona-0.995b.drv' does not have wanted outputs 'out'
$ git rev-parse HEAD
eee33247cf6941daea8398c976bd2dda7962b125
$ nix build --json --file . texlive.pkgs.iwona
nix: src/libstore/outputs-spec.hh:46: nix::OutputsSpec::Names::Names(std::set<std::__cxx11::basic_string<char> >&&): Assertion `!empty()' failed.
Aborted (core dumped)
In particular `local://<path>` and `unix://` (without any path) now
work, and mean the same things as `local` and `daemon`, respectively. We
thus now have the opportunity to desguar `local` and `daemon` early.
This will allow me to make a change to
https://github.com/NixOS/nix/pull/9839 requested during review to
desugar those earlier.
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
Basically I'd expect the same behavior as with `nix-build`, i.e.
with `--keep-going` the hash-mismatch error of each failing
fixed-output derivation is shown.
The approach is derived from `Store::buildPaths` (`entry-point.cc`):
instead of throwing the first build-result, check if there are any build
errors and if so, display all of them and throw after that.
Unfortunately, the BuildResult struct doesn't have an `ErrorInfo`
(there's a FIXME for that at least), so I have to construct my own here.
This is a rather cheap bugfix and I decided against touching too many
parts of libstore for that (also I don't know if that's in line with the
ongoing refactoring work).
Closes https://git.lix.systems/lix-project/lix/issues/302
Change-Id: I378ab984fa271e6808c6897c45e0f070eb4c6fac
Signed-off-by: Jörg Thalheim <joerg@thalheim.io>
previously the test directory could have been left untouched before executing
a test when `init.sh` was not run - and sometimes it isn't
supposed to be run - which made the test suite highly stateful and thus
behaving surprisingly on multiple runs.
pararameterisation is not actually needed the way things are currently
set up, and it confused me when trying to understand what the code does.
all but one test sources vars-and-functions.sh, which nominally only
defines variables, but in practice is always coupled with the actual
initialisation. while the cleaner way of making this more legible would
be to source variables and initialisation separately, this would produce
a huge diff.
the change requires a few small fixes to keep the tests working:
- only create test home directory during initialisation
that vars-and-functions.sh wrote to the file system seems not write
- fix creation of the test directory
due to statefulness, the test home directory was implicitly creating
the test root, too. decoupling that made it apparent that this was
probably not intentional, and certainly confusing.
- only source vars-and-functions.sh if init.sh is not needed
there is one test case that only needs a helper function but no
initialisation side effects
- remove some unnecessary cleanups and split parts of re-used test code
there were confusing bits in how initialisation code was repurposed,
which break if trying to refactor the outer layers naively...
In streaming mode, libarchive doesn't handle symlinks in zip files
correctly. So write the entire file to disk so libarchive can access
it in random-access mode.
Fixes#10649. This was broken in cabee98152.
Make sure that `extraSandboxProfile` is set before we check whether it's
empty or not (in the `sandbox=true` case).
Also adds a test case for this.
Co-Authored-By: Artemis Tosini <lix@artem.ist>
Co-Authored-By: Eelco Dolstra <edolstra@gmail.com>
This also reworks the Mercurial fetcher (which was still using the
old cache interface) to have two distinct cache mappings:
* A ref-to-rev mapping, which is store-independent.
* A rev-to-store-path mapping.
https://github.com/NixOS/nix/pull/10456 fixed the addition of symlink
store paths to the sandbox, but also made it so that the hardcoded
sandbox paths (like `/etc/hosts`) were now bind-mounted without
following the possible symlinks. This made these files unreadable if
there were symlinks (because the sandbox would now contain a symlink to
an unreachable file rather than the underlying file).
In particular, this broke FOD derivations on NixOS as `/etc/hosts` is a
symlink there.
Fix that by canonicalizing all these hardcoded sandbox paths before
adding them to the sandbox.
This requires moving resolveSymlinks() into SourceAccessor. Also, it
requires LocalStoreAccessor::maybeLstat() to work on parents of the
store (to avoid an error like "/nix is not in the store").
Fixes#10375.
Instead of relying on setup script to set output variables when
structured attributes are enabled, iterate over the values of an
outputs associative array.
See also
374fa3532e/pkgs/stdenv/generic/setup.sh (L23-L26)
Now that we have a few things identifying content address methods by
name, we should be consistent about it.
Move up the `parseHashAlgoOpt` for tidiness too.
Discussed this change for consistency's sake as part of #8876
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
This probably snuck in in a refactor using truthiness or so. The
trustedness flag was having the optional fullness checked, rather than
the actual contained trust level.
Also adds some tests.
```
m1@6876551b-255d-4cb0-af02-8a4f17b27e2e ~ % nix store ping
warning: 'nix store ping' is a deprecated alias for 'nix store info'
Store URL: daemon
Version: 2.20.4
Trusted: 0
m1@6876551b-255d-4cb0-af02-8a4f17b27e2e ~ % nix doctor
warning: 'doctor' is a deprecated alias for 'config check'
[PASS] PATH contains only one nix version.
[PASS] All profiles are gcroots.
[PASS] Client protocol matches store protocol.
[INFO] You are trusted by store uri: daemon
```
When querying all paths in a binary cache store, the path's representation
is `<hash>-x` (where `x` is the value of `MissingName`) because the .narinfo
filenames only contain the hash.
Before cc46ea1630 this worked correctly,
because the entire path info was read and the path from this
representation was printed, i.e. in the form `<hash>-<name>`. Since then
however, the direct result from `queryAllValidPaths()` was used as `path`.
Added a regression test to make sure the behavior remains correct.
I realized it was checking NAR hashes before of added objects, which
makes little sense --- we don't really care about ancillary NAR hashes.
Now, the bottom `nix store add` tests compare the CA field with a git
hash to hashes calculated by Git. This matches top `nix hash path` ones
in using git as a source of truth.
* Add regression test
* Fix 'no repo' test so it doesn't succeed if the data is still in cache
* Use git_revparse_single inside git-utils instead of reimplementing the same logic.
