Commit graph

3318 commits

Author SHA1 Message Date
Eelco Dolstra
eda0fee160
Merge pull request #5175 from Pamplemousse/make
Don't overwrite user provided `lib*_LDFLAGS`
2021-08-30 12:44:29 +02:00
regnat
b2bce915ad Don’t accept experimental features from the client
If the client sends an “experimental features” setting, just ignore it
2021-08-30 10:48:05 +02:00
Pamplemousse
a4c6d319a8 Don't overwrite user provided lib*_LDFLAGS
Signed-off-by: Pamplemousse <xav.maso@gmail.com>
2021-08-25 08:59:19 -07:00
Magic_RB
8438114399
Add ignored_acls setting
Signed-off-by: Magic_RB <magic_rb@redalder.org>
2021-08-14 21:46:09 +02:00
Piotr Szubiakowski
9f13cb31e8
Install pkg-config files in the correct location
Use `$(libdir)` while installing .pc files looks like a more generic
solution. For example, it will work for distributions like RHEL or
Fedora where .pc files are installed in `/usr/lib64/pkgconfig`.
2021-08-13 21:08:58 +00:00
Pamplemousse
0da416f820 15f4d4f follow up
* libstore: `bz2` should not be linked
  * libutil: `zlib.h` should not be included

Signed-off-by: Pamplemousse <xav.maso@gmail.com>
2021-08-10 16:04:53 -07:00
Eelco Dolstra
8943e3176d
Merge pull request #5111 from Pamplemousse/clean
Minor maintenance cleaning
2021-08-09 20:05:03 +02:00
Sebastian Ullrich
a0f97b1f54 Expand docstring of Store::querySubstitutablePathInfos 2021-08-09 15:58:50 +02:00
Eelco Dolstra
4c5ce2a345
Merge pull request #5104 from andir/refscan-race
Fix potential race-condition in reference scanning code
2021-08-09 14:49:24 +02:00
Andreas Rammhold
a9cb1ca32c libstore: use set instead of list for waiter list
This replaces the O(n) search complexity in our insert code with a
lookup of O(log n). It also makes removing waitees easier as we can use
the extract method provided by the set class.
2021-08-08 14:05:38 +02:00
Sebastian Ullrich
12f50b6510 Short-circuit querying substituters on success 2021-08-08 13:24:13 +02:00
Andreas Rammhold
b2d3976163 Fix potential race-condition in reference scanning code
Previously the code ensures that the isBase32 array would only be
initialised once in a single-threaded context. If two threads happen to
call the function before the initialisation was completed both of them
would have completed the initialization step. This allowed for a
race-condition where one thread might be done with the initialization
but the other thread sets all the fields to false again. For a brief
moment the base32 detection would then produce false-negatives.
2021-08-07 19:10:25 +02:00
Pamplemousse
d64cb33e90 Remove unused struct in libstore
Signed-off-by: Pamplemousse <xav.maso@gmail.com>
2021-07-30 10:34:28 -07:00
regnat
d9ba3385a9 Don’t send the experimental-features to the daemon
The experimental features are, well, experimental, and shouldn’t be
carelessly and transparently enabled.
Besides, some (`ca-derivations` at least) need to be enabled at startup
in order to work properly.
So it’s better to just require that daemon be started with the right
`experimental-features` option.

Fix #5017
2021-07-30 10:34:50 +02:00
Eelco Dolstra
72c5bac39d Revert no longer necessary change 2021-07-26 13:50:18 +02:00
Eelco Dolstra
fe1f34fa60 Low-latency closure copy
This adds a new store operation 'addMultipleToStore' that reads a
number of NARs and ValidPathInfos from a Source, allowing any number
of store paths to be copied in a single call. This is much faster on
high-latency links when copying a lot of small files, like .drv
closures.

For example, on a connection with an 50 ms delay:

Before:

  $ nix copy --to 'unix:///tmp/proxy-socket?root=/tmp/dest-chroot' \
    /nix/store/90jjw94xiyg5drj70whm9yll6xjj0ca9-hello-2.10.drv \
    --derivation --no-check-sigs
  real    0m57.868s
  user    0m0.103s
  sys     0m0.056s

After:

  real    0m0.690s
  user    0m0.017s
  sys     0m0.011s
2021-07-26 13:31:09 +02:00
Eelco Dolstra
9957315ce0 RemoteStore::buildPaths(): Handle evalStore 2021-07-22 22:50:48 +02:00
Eelco Dolstra
a7b7fcfb16 Remove redundant RealisedPath::closure() call 2021-07-22 22:43:18 +02:00
Eelco Dolstra
eb6db4fd38 buildPaths(): Add an evalStore argument
With this, we don't have to copy the entire .drv closure to the
destination store ahead of time (or at all). Instead, buildPaths()
reads .drv files from the eval store and copies inputSrcs to the
destination store if it needs to build a derivation.

Issue #5025.
2021-07-22 09:59:51 +02:00
Eelco Dolstra
668abd3e57 copyPaths: Pass store by reference 2021-07-22 09:59:51 +02:00
Eelco Dolstra
8d9f7048cd Use eval-store in more places
In particular, this now works:

  $ nix path-info --eval-store auto --store https://cache.nixos.org nixpkgs#hello

Previously this would fail as it would try to upload the hello .drv to
cache.nixos.org. Now the .drv is instantiated in the local store, and
then we check for the existence of the outputs in cache.nixos.org.
2021-07-22 09:59:51 +02:00
Eelco Dolstra
95e915a993 DummyStore: Remove redundant method 2021-07-22 09:59:51 +02:00
Eelco Dolstra
e9848beca7 nix-build: Copy drv closure between eval store and build store 2021-07-22 09:59:51 +02:00
Eelco Dolstra
3d9de41a5b Hacky fast closure copying mechanism 2021-07-22 09:59:51 +02:00
Eelco Dolstra
dfda499326 Downgrade warning message
If a store doesn't support GC, then we don't need to warn about the
inability to create roots.
2021-07-22 09:58:50 +02:00
Eelco Dolstra
3bb8667a17 Tweak --no/use-registries doc strings 2021-07-21 14:27:37 +02:00
Eelco Dolstra
fc248cf59e Merge branch 'balsoft/no-registries' of https://github.com/serokell/nix 2021-07-21 10:11:40 +02:00
regnat
8707773965 Properly lock the builds of CA derivations
Make sure that we can’t build the same derivation twice at the same
time.

Fix https://github.com/NixOS/nix/issues/5029
2021-07-20 06:57:56 +02:00
Alexander Bantyev
3e57e3480b
Add use-registries config option (and deprecate --no-registries flag)
Some people want to avoid using registries at all on their system; Instead
of having to add --no-registries to every command, this commit allows to
set use-registries = false in the config. --no-registries is still allowed
everywhere it was allowed previously, but is now deprecated.

Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
2021-07-16 23:26:04 +03:00
regnat
a4ec6cb1da Be more lenient when realisations have a conflicting dependency set
- This can legitimately happen (for example because of a non-determinism
  causing a build-time dependency to be kept or not as a runtime
  reference)
- Because of older Nix versions, it can happen that we encounter a
  realisation with an (erroneously) empty set of dependencies, in which
  case we don’t want to fail, but just warn the user and try to fix it.
2021-07-16 11:48:41 +02:00
regnat
9b1f3cbc13 Forward the whole Nix config to the post-build-hook
Fill `NIX_CONFIG` with the value of the current Nix configuration before
calling the post-build-hook.
That way the whole configuration (including the possible
`experimental-features`, a possibly `--store` option or whatever) will
be made available to the hook
2021-07-15 18:41:56 +02:00
Eelco Dolstra
eb4788954d
Merge pull request #5006 from illustris/nscd
fixed-output derivations: fix incorrect responses for getpwuid
2021-07-13 17:20:37 +02:00
illustris
7bc17a903b fixed output derivations: fix incorrect responses for getpwuid
Passing nscd socket into the build environment causes unexpected behavior in programs that make getpwuid and other related calls.

relevant threads:
- https://github.com/NixOS/nix/issues/4991
- https://discourse.nixos.org/t/haunted-nix-build-breaks-isolation/13869
2021-07-13 15:34:14 +05:30
Eelco Dolstra
02dff9e529 Style 2021-07-12 17:32:23 +02:00
Eelco Dolstra
e06c272c12 Merge branch 'structured-attrs-shell' of https://github.com/Ma27/nix 2021-07-12 17:13:05 +02:00
Maximilian Bosch
04cd2da84c
Merge branch 'master' into structured-attrs-shell
Conflicts:
        src/nix/develop.cc
        src/nix/get-env.sh
        tests/shell.nix
2021-07-12 15:49:39 +02:00
Eelco Dolstra
91d2e8d5ad Error -> UsageError 2021-07-12 15:04:46 +02:00
Eelco Dolstra
8d97030bfd Merge branch 'days' of https://github.com/nielsegberts/nix 2021-07-12 15:02:24 +02:00
Niels Egberts
2cf14db857 Throw on unexpected input for --delete-older-than
'--delete-older-than 10' deletes the generations older than a single day, and '--delete-older-than 12m' deletes all generations older than 12 days.

This changes makes it throw on those invalid inputs, and gives an example of a valid input.
2021-07-11 11:24:43 +01:00
Eelco Dolstra
ceda58d112 Formatting 2021-07-09 14:03:51 +02:00
Eelco Dolstra
2172e60f7a
Merge pull request #4935 from alyssais/host_os
Apply OS checks to host platform, not build
2021-07-08 12:40:54 +02:00
Eelco Dolstra
cee426cc01
Merge pull request #4938 from tomcur/store-uri-parsing
Improve machine store URI parsing
2021-07-05 14:00:35 +02:00
Eelco Dolstra
6182ae6898
Merge pull request #4942 from NixOS/ca/remove-lock-files
Eventually delete the CA paths lock files
2021-06-28 16:12:19 +02:00
Eelco Dolstra
f5320299dd
Merge pull request #4937 from NixOS/ca/make-the-tests-useful
Make the CA tests actually test something
2021-06-28 16:06:49 +02:00
regnat
8b6fba2b63 Eventually delete the CA paths lock files
Mark the lockfiles as having to eventually be deleted so that they don’t
stay laying around in the store at the end of the build

Fix #4936
2021-06-24 15:45:05 +02:00
Maximilian Bosch
644415d391
Perform input rewrites only in LocalDerivationGoal 2021-06-24 15:25:21 +02:00
regnat
7746cb13dc Make CA derivations compatible with recursive Nix
Add an access-control list to the realisations in recursive-nix (similar
to the already existing one for store paths), so that we can build
content-addressed derivations in the restricted store.

Fix #4353
2021-06-24 14:53:10 +02:00
regnat
be7a4a6a13 Make the post-build-hook also run for unresolved CA derivations
Fix #4837
2021-06-24 11:41:57 +02:00
Thomas Churchman
e3d11f9a9c Improve machine store URI parsing 2021-06-23 22:09:22 +01:00
Alyssa Ross
4f80464645
Apply OS checks to host platform, not build
Previously, the build system used uname(1) output when it wanted to
check the operating system it was being built for, which meant that it
didn't take into-account cross-compilation when the build and host
operating systems were different.

To fix this, instead of consulting uname output, we consult the host
triple, specifically the third "kernel" part.

For "kernel"s with stable ABIs, like Linux or Cygwin, we can use a
simple ifeq to test whether we're compiling for that system, but for
other platforms, like Darwin, FreeBSD, or Solaris, we have to use a
more complicated check to take into account the version numbers at the
end of the "kernel"s.  I couldn't find a way to just strip these
version numbers in GNU Make without shelling out, which would be even
more ugly IMO.  Because these checks differ between kernels, and the
patsubst ones are quite fiddly, I've added variables for each host OS
we might want to check to make them easier to reuse.
2021-06-23 15:00:36 +00:00
regnat
c878cee895 Assert that compatible realisations have the same dependencies
Should always hold, but that’s not necessarily obvious, so better
enforce it
2021-06-23 11:27:16 +02:00
regnat
16fb7d8d95 Display the diverging paths in case of a realisation mismatch 2021-06-23 11:27:16 +02:00
regnat
40f925b2da Fix indentation 2021-06-23 11:27:16 +02:00
regnat
d32cf0c17a Gracefully ignore a substituter if it holds an incompatible realisation 2021-06-23 11:27:16 +02:00
regnat
b8f7177a7b Properly fail when trying to register an incoherent realisation 2021-06-23 11:27:14 +02:00
Eelco Dolstra
4a5aa1dbf6
Merge pull request #4838 from NixOS/ca/recursively-substitute-realisations
Recursively substitute the realisations
2021-06-23 10:33:25 +02:00
Eelco Dolstra
26d2c62225
Merge pull request #4906 from NixOS/collect-garbage-ca
Make `computeFSClosure` ca-aware
2021-06-23 10:07:08 +02:00
Eelco Dolstra
d9a43d3137
Merge pull request #4905 from NixOS/ca-derivations-machine-feature
Add a ca-derivations required machine feature
2021-06-23 10:05:53 +02:00
Eelco Dolstra
4f9508c3b5
Merge pull request #4836 from NixOS/ca/track-drvoutput-dependencies-2-le-retour
Track the dependencies of CA realisations
2021-06-23 10:03:31 +02:00
regnat
ed0e21a88d Fix indentation 2021-06-23 08:16:34 +02:00
regnat
7c96a76dd7 Reformat the sql statements 2021-06-23 08:16:34 +02:00
Théophane Hufschmitt
8d09a4f9a0 Remove a useless string split
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
2021-06-23 08:16:34 +02:00
Théophane Hufschmitt
c13d7d0b97 Pass more values by reference
Rather than copying them around everywhere

Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
2021-06-23 08:16:34 +02:00
Maximilian Bosch
6f206549ba
Move writeStructuredAttrsShell out of ParsedDerivation class 2021-06-22 21:14:20 +02:00
Maximilian Bosch
27ce722638
Prefix env vars for attrs.* files with NIX_ 2021-06-22 19:45:08 +02:00
Maximilian Bosch
a92245b110
Remove now-obsolete typedef 2021-06-22 19:15:57 +02:00
Maximilian Bosch
f1e281c4fe
Split shell & json creation for build environments with structured attrs 2021-06-22 19:15:57 +02:00
Maximilian Bosch
3944a120ec
Set environment variables for .attrs.json & .attrs.sh
This way no derivation has to expect that these files are in the `cwd`
during the build. This is problematic for `nix-shell` where these files
would have to be inserted into the nix-shell's `cwd` which can become
problematic with e.g. recursive `nix-shell`.

To remain backwards-compatible, the location inside the build sandbox
will be kept, however using these files directly should be deprecated
from now on.
2021-06-22 19:15:57 +02:00
Maximilian Bosch
3b5429aec1
Source complete env in nix-shell with __structuredAttrs = true;
This is needed to push the adoption of structured attrs[1] forward. It's
now checked if a `__json` exists in the environment-map of the derivation
to be openend in a `nix-shell`.

Derivations with structured attributes enabled also make use of a file
named `.attrs.json` containing every environment variable represented as
JSON which is useful for e.g. `exportReferencesGraph`[2]. To
provide an environment similar to the build sandbox, `nix-shell` now
adds a `.attrs.json` to `cwd` (which is mostly equal to the one in the
build sandbox) and removes it using an exit hook when closing the shell.

To avoid leaking internals of the build-process to the `nix-shell`, the
entire logic to generate JSON and shell code for structured attrs was
moved into the `ParsedDerivation` class.

[1] https://nixos.mayflower.consulting/blog/2020/01/20/structured-attrs/
[2] https://nixos.org/manual/nix/unstable/expressions/advanced-attributes.html#advanced-attributes
2021-06-22 19:15:57 +02:00
regnat
dcabb46124 Shorten a stupidly long sql query name 2021-06-21 16:28:06 +02:00
Eelco Dolstra
610baf359a
Merge pull request #4833 from NixOS/ca/json-realisations-in-worker-protocol
Always send the realisations as JSON
2021-06-21 16:12:17 +02:00
regnat
3784c66a46 Remove a possible existing store path when building CA derivations
In case a previous interrupted build left a garbage path laying around,
remove it before trying to move the path to its final location.

Fix #4858
2021-06-21 15:29:15 +02:00
Eelco Dolstra
4202a3bc4e UDSRemoteStore: Support the 'root' store parameter
Useful when we're using a daemon with a chroot store, e.g.

  $ NIX_DAEMON_SOCKET_PATH=/tmp/chroot/nix/var/nix/daemon-socket/socket nix-daemon --store /tmp/chroot

Then the client can now connect with

  $ nix build --store unix:///tmp/chroot/nix/var/nix/daemon-socket/socket?root=/tmp/chroot nixpkgs#hello
2021-06-18 17:04:11 +02:00
regnat
96d7170e12 Don’t check the deriver field on computeFSClosure
That doesn’t really make sense with CA derivations (and wasn’t even
really correct before because of FO derivations, though that probably
didn’t matter much in practice)
2021-06-12 12:24:53 +02:00
regnat
7ac038fa4b Make computeFSClosure ca-aware
Fix #4820 by preventing nix-collect garbage from crashing if
`keep-outputs` or `keep-derivations` is true
2021-06-11 09:26:49 +02:00
regnat
7c077d2a0f Add a ca-derivations required machine feature
Make ca-derivations require a `ca-derivations` machine feature, and
ca-aware builders expose it.

That way, a network of builders can mix ca-aware and non-ca-aware
machines, and the scheduler will send them in the right place.
2021-06-11 09:12:53 +02:00
regnat
5985b8b527 Check the CA hash when importing stuff in the local store
When adding a path to the local store (via `LocalStore::addToStore`),
ensure that the `ca` field of the provided `ValidPathInfo` does indeed
correspond to the content of the path.
Otherwise any untrusted user (or any binary cache) can add arbitrary
content-addressed paths to the store (as content-addressed paths don’t
need a signature).
2021-06-01 15:09:24 +02:00
Eelco Dolstra
48396d940e
Merge pull request #4866 from alyssais/libdl
Only link with libdl on Linux
2021-06-01 11:50:50 +02:00
Eelco Dolstra
caef6f4314
Merge pull request #4734 from p01arst0rm/fix-s3-ifdef
unified macro style for ENABLE_S3
2021-06-01 11:30:21 +02:00
Alyssa Ross
c57ab17687
Only link with libdl on Linux
Linux is (as far as I know) the only mainstream operating system that
requires linking with libdl for dlopen.  On BSD, libdl doesn't exist,
so on non-FreeBSD BSDs linking will currently fail.  On macOS, it's
apparently just a symlink to libSystem (macOS libc), presumably
present for compatibility with things that assume Linux.

So the right thing to do here is to only add -ldl on Linux, not to add
it for everything that isn't FreeBSD.
2021-06-01 08:05:21 +00:00
regnat
a22755721b Recursively substitute the realisations
Make sure that whenever we substitute a realisation, we also substitute
its entire closure
2021-05-26 18:44:17 +02:00
regnat
1f3ff0d193 Aso track the output path of the realisation dependencies 2021-05-26 17:09:21 +02:00
regnat
cb46d70794 Add a db migration script 2021-05-26 16:59:09 +02:00
regnat
63ebfc73c5 Make copyPaths copy the whole realisations closure
Otherwise registering the realisations on the remote side might fail as
it now expects a complete closure
2021-05-26 16:59:09 +02:00
regnat
8c30acc3e8 Properly track the drvoutput references when building 2021-05-26 16:59:09 +02:00
regnat
af3afd25ea Add a method to compute the closure of a realisation
Only considers the closure in term of `Realisation`, ignores all the
opaque inputs.

Dunno whether that’s the nicest solution, need to think it through a bit
2021-05-26 16:59:09 +02:00
regnat
eca6ff06d6 Store the realisation deps on the local store 2021-05-26 16:59:09 +02:00
regnat
7ce0441d80 Add a dependencies field to DrvOutputInfo
Currently never used, nor set but will be useful shortly
2021-05-26 16:59:09 +02:00
regnat
7616268812 Always send the realisations as JSON
Align all the worker protocol with `buildDerivation` which inlines the
realisations as one opaque json blob.
That way we don’t have to bother changing the remote store protocol
when the definition of `Realisation` changes, as long as we keep the
json backwards-compatible
2021-05-26 16:59:09 +02:00
regnat
129384bcf3 Remove the remaining occurenceses of a NarHash modulo 2021-05-26 09:39:29 +02:00
regnat
79ae9e4558 Make the Nar hash non modulo
It makes much more sense to have the Nar hash be a plain straight hash
rather than a hash modulo
2021-05-25 10:58:43 +02:00
regnat
a8416866cf Always send the realisations as JSON
Align all the worker protocol with `buildDerivation` which inlines the
realisations as one opaque json blob.
That way we don’t have to bother changing the remote store protocol
when the definition of `Realisation` changes, as long as we keep the
json backwards-compatible
2021-05-19 11:45:16 +02:00
regnat
184558834a Extract a generic computeClosure function
Move the `closure` logic of `computeFSClosure` to its own (templated) function.

This doesn’t bring much by itself (except for the ability to properly
test the “closure” functionality independently from the rest), but it
allows reusing it (in particular for the realisations which will require
a very similar closure computation)
2021-05-19 11:44:58 +02:00
Eelco Dolstra
6849ae82de
Merge pull request #4818 from NixOS/ca/cli-use-builtpaths
Enforce the use of properly built paths in libcmd
2021-05-17 16:15:40 +02:00
regnat
2105084645 Enfore the use of properly built paths in libcmd
Replace `DerivedPathWithHints` by a new `BuiltPath` type that serves as
a proof that the corresponding path has been built.
2021-05-17 08:45:08 +02:00
Emily
559a504da7 sandbox: allow SystemVersionCompat.plist on Darwin
For whatever reason, many programs trying to access SystemVersion.plist
also open SystemVersionCompat.plist; this includes Python code and
coreutils’ `cat(1)` (but not the native macOS `/bin/cat`). Illustratory
`dtruss(1m)` output:

    open("/System/Library/CoreServices/SystemVersion.plist\0", 0x0, 0x0)		 = 3 0
    open("/System/Library/CoreServices/SystemVersionCompat.plist\0", 0x0, 0x0)		 = 4 0

I assume this is a Big Sur change relating to the 10.16.x/11.x
version compatibility divide and that it’s something along the lines of
a hook inside libSystem.

Fixes a lot of sandboxed package builds under Big Sur.
2021-05-17 01:24:31 +01:00
Eelco Dolstra
340f831ebe
Merge pull request #4798 from matthewbauer/relock-wait-for-build-slot-goals
Relock wait for build slot goals
2021-05-13 13:07:35 +02:00
Eelco Dolstra
89a4ede92b
Merge pull request #4801 from matthewbauer/fix-tokenize-output-names
Fix tokenize output names in DerivedPath
2021-05-13 13:06:29 +02:00
Matthew Bauer
8c7e043de2 Fix tokenize output names in drv
This should fix the issue described in
https://discourse.nixos.org/t/derivation-does-not-have-wanted-outputs-dev-out/12905.

Specifically, we get an error of

  error: derivation '/nix/store/_.drv' does not have wanted outputs 'dev,out'

when a path like /nix/store/_.drv!dev,out is sent to the daemon.
2021-05-12 21:40:28 -05:00
Matthew Bauer
9a14335845 Relock wait for build slot goals
When we don’t have enough free job slots to run a goal, we put it in
the waitForBuildSlot list & unlock its output locks. This will
continue from where we left off (tryLocalBuild). However, we need the
locks to get reacquired when/if the goal ever restarts. So, we need to
send it back through tryToBuild to get reqacquire those locks.

I think this bug was introduced in
https://github.com/NixOS/nix/pull/4570. It leads to some builds
starting without proper locks.
2021-05-12 12:15:32 -05:00
regnat
ec613603ba DerivedPathWithHints -> BuiltPath
Just a renaming for now
2021-05-12 16:19:51 +02:00
Lorenzo Manacorda
4029f4b05b doc: mention Priority for substituters 2021-05-12 13:27:05 +02:00
Eelco Dolstra
7f9759b18d
Merge pull request #4781 from NixOS/locally_cache_the_remote_realisations
Add a realisations disk cache
2021-05-10 20:37:57 +02:00
regnat
d5d19582ef Simplify the realisations disk cache 2021-05-10 17:47:14 +02:00
regnat
ab96c1ee50 Remove useless parents
I never remember the exact syntax of the `switch` statement
2021-05-10 17:36:49 +02:00
regnat
b66234134f Add a realisations disk cache
Similar to the nar-info disk cache (and using the same db).
This makes rebuilds muuch faster.

- This works regardless of the ca-derivations experimental feature.
  I could modify the logic to not touch the db if the flag isn’t there,
  but given that this is a trash-able local cache, it doesn’t seem to be
  really worth it.
- We could unify the `NARs` and `Realisation` tables to only have one
  generic kv table. This is left as an exercise to the reader.
- I didn’t update the cache db version number as the new schema just
  adds a new table to the previous one, so the db will be transparently
  migrated and is backwards-compatible.

Fix #4746
2021-05-06 17:38:20 +02:00
regnat
bf485dcf46 Properly normalize the content-addressed paths
Make sure that their timestamp are always normalized.
Otherwise, strange − and non-deterministic − things might happen, like
https://github.com/NixOS/nixpkgs/issues/121813

Fix #4775
2021-05-05 21:00:08 +02:00
regnat
dadfbce318 Fix the double-slash in the realisations path
Make sure that we always access the realisations under
`binaryCacheUrl/realisations` and not `binaryCacheUrl//realisations`

Fix #4766
2021-05-04 10:35:34 +02:00
Eelco Dolstra
40378fbcba
Merge pull request #4761 from emilazy/issue-4658-mark-impure-host-deps-as-optional
Mark `__impureHostDeps` paths as optional
2021-05-03 16:13:36 +02:00
Maximilian Bosch
e5951a6b2f
Bump version number for DerivedPath changes
I guess I misunderstood John's initial explanation about why wildcards
for outputs are sent to older stores[1]. My `nix-daemon` from 2021-03-26
also has version 1.29, but misses the wildcard[2]. So bumping seems to
be the right call.

[1] https://github.com/NixOS/nix/pull/4759#issuecomment-830812464
[2] 255d145ba7
2021-05-03 01:12:23 +02:00
Emily
c4355a52fa Mark __impureHostDeps paths as optional
Starting in macOS 11, the on-disk dylib bundles are no longer available,
but nixpkgs needs to be able to keep compatibility with older versions
that require `/usr/lib/libSystem.B.dylib` in `__impureHostDeps`. Allow
it to keep backwards compatibility with these versions by marking these
dependencies as optional.

Fixes #4658.
2021-05-02 05:30:50 +01:00
Eelco Dolstra
fe2bf464cf Merge branch 'remove-trailing-spaces' of github.com:NixOS/nix 2021-04-23 15:09:44 +02:00
regnat
31313d1401 Replace the trailing markdown spaces by a backslash
They are equivalent according to
<https://spec.commonmark.org/0.29/#hard-line-breaks>,
and the trailing spaces tend to be a pain (because the make git
complain, editors tend to want to remove them − the `.editorconfig`
actually specifies that − etc..).
2021-04-23 14:37:21 +02:00
p01arst0rm
45473d02c9 unified macro style for ENABLE_S3 2021-04-23 07:30:05 +01:00
regnat
9161e02039 Always register the realisations of input-addressed drvs
Fix #4725
2021-04-22 20:07:02 +02:00
Alyssa Ross
9ac6534f7c
Include sys/wait.h everywhere WIFEXITED etc is used
This is required on NetBSD, and I think FreeBSD too.
2021-04-19 18:31:58 +00:00
Eelco Dolstra
6fb7582413 Merge branch 'libarchive-decompress' of https://github.com/serokell/nix 2021-04-15 13:39:04 +02:00
regnat
ed29610cc6 Fix registerDrvOutput with the daemon
Resolve a protocol issue that caused the daemon to endlessly wait for
some information that the client doesn't ever send
2021-04-13 13:58:22 +02:00
Domen Kožar
c2dfda007e
add tests for zstd compression 2021-04-09 23:13:08 +02:00
Eelco Dolstra
9b9e703df4 restoreSignals() + restoreAffinity() -> restoreProcessContext() 2021-04-07 13:10:02 +02:00
Eelco Dolstra
8a29052cb2 PathSubstitutionGoal: Clean up pipe
If there were many top-level goals (which are not destroyed until the
very end), commands like

  $ nix copy --to 'ssh://localhost?remote-store=/tmp/nix' \
    /run/current-system --no-check-sigs --substitute-on-destination

could fail with "Too many open files". So now we do some explicit
cleanup from amDone(). It would be cleaner to separate goals from
their temporary internal state, but that would be a bigger refactor.
2021-04-07 12:21:31 +02:00
John Ericson
125a824228 Document the derived path types. 2021-04-05 10:56:48 -04:00
John Ericson
d8fa7517fa buildable.{cc,hh} -> derived-path.{cc,hh} 2021-04-05 10:33:28 -04:00
John Ericson
179582872d Make DerivedPathWithHints a newtype
This allows us to namespace its constructors under it.
2021-04-05 10:05:21 -04:00
John Ericson
9b805d36ac Rename Buildable 2021-04-05 09:52:25 -04:00
John Ericson
9dfb97c987 "newtype" BuildableReq
This makes for better types errors and allows us to give it methods.
2021-04-05 09:35:55 -04:00
John Ericson
4fe41c6db3 No templates for Buildable and BuildableReq 2021-04-05 09:15:25 -04:00
John Ericson
255d145ba7 Use BuildableReq for buildPaths and ensurePath
This avoids an ambiguity where the `StorePathWithOutputs { drvPath, {}
}` could mean "build `brvPath`" or "substitute `drvPath`" depending on
context.

It also brings the internals closer in line to the new CLI, by
generalizing the `Buildable` type is used there and makes that
distinction already.

In doing so, relegate `StorePathWithOutputs` to being a type just for
backwards compatibility (CLI and RPC).
2021-04-05 08:33:00 -04:00
John Ericson
32f4454b9f Move StorePathWithOutput utilities out of store class
These are by no means part of the notion of a store, but rather are
things that happen to use stores. (Or put another way, there's no way
we'd make them virtual methods any time soon.) It's better to move them
out of that too-big class then.

Also, this helps us remove StorePathWithOutputs from the Store interface
altogether next commit.
2021-04-05 08:31:37 -04:00
John Ericson
7a2b566dc8 Move StorePathWithOutputs into its own header/file
In the following commits it will become less prevalent.
2021-04-05 08:31:37 -04:00
John Ericson
f7d9f7c338 Pull out Buildable into its own file/header in libnixstore 2021-04-05 08:31:37 -04:00
Eelco Dolstra
dd77f71afe LocalBinaryCacheStore::upsertFile(): Fix race
When multiple threads try to upsert the same file, this could fail.

Fixes #4667.
2021-03-26 17:10:15 +01:00
Eelco Dolstra
4638bcfb2c Fix some typos
Fixes #4671.
2021-03-26 16:14:38 +01:00
Eelco Dolstra
1581c3e8ef
Merge pull request #4603 from DavHau/davhau-improve-nix-conf-help-builders
improve man page for nix.conf (builders)
2021-03-23 16:13:02 +01:00
DavHau
0f40561c78 nix.conf builders: refer to manual page 2021-03-23 10:19:00 +07:00
John Ericson
f44206e719 Fix typos in the last PR #4656 2021-03-22 15:18:48 +00:00
John Ericson
9d309de0de Clean up serialization for BuildResult
A few versioning mistakes were corrected:

- In 27b5747ca7, Daemon protocol had some
  version `>= 0xc` that should have been `>= 0x1c`, or `28` since the
  other conditions used decimal.

- In a2b69660a9, legacy SSH gated new CAS
  info on version 6, but version 5 in the server. It is now 6
  everywhere.

Additionally, legacy ssh was sending over more metadata than the daemon
one was. The daemon now sends that data too.

CC @regnat

Co-authored-by: Cole Helbling <cole.e.helbling@outlook.com>
2021-03-22 14:57:41 +00:00
Robert Hensing
a61112aadf Remove unimplemented hashAlgoOpt
It was in the header but never implemented.
2021-03-17 11:27:11 +01:00
Eelco Dolstra
ccb8a403ee
Merge pull request #4587 from obsidiansystems/derivation-goal-detect-invalid-output
Throw error for derivation goal with bogus wanted output
2021-03-15 16:49:44 +01:00
Eelco Dolstra
c0073f6268
Merge pull request #4580 from obsidiansystems/restore-test-build-remote-ca-fixed
Restore now-working build-remote-content-addressed-fixed test
2021-03-15 16:48:28 +01:00
regnat
703c98c6cb Properly sign the unresolved drvs
Don't let them inherit the signature from the parent one (because it
makes no sense to do so), but re-sign them after they have been built
2021-03-15 16:35:17 +01:00
regnat
54ced9072b Check the signatures when copying store paths around
Broken atm
2021-03-15 16:35:14 +01:00
regnat
3e6017f911 pathInfoIsTrusted -> pathInfoIsUntrusted
I guess the rationale behind the old name wath that
`pathInfoIsTrusted(info)` returns `true` iff we would need to `blindly`
trust the path (because it has no valid signature and `requireSigs` is
set), but I find it to be a really confusing footgun because it's quite
natural to give it the opposite meaning.
2021-03-15 16:34:49 +01:00
regnat
826877cabf Add some logic for signing realisations
Not exposed anywhere, but built realisations are now signed (and this
should be forwarded when copy-ing them around)
2021-03-15 16:34:49 +01:00
Eelco Dolstra
306c154632
Merge pull request #4592 from NixOS/ca/remote-cache
Substitute content-addressed derivations
2021-03-15 16:22:42 +01:00
Yorick van Pelt
8a0c00b856
Use libarchive for all compression 2021-03-10 22:34:29 +01:00
John Ericson
6212e89bf6 Avoid some StorePath -> Path -> StorePath roundtrips
There were done when StorePath was defined in Rust and there were some
FFI issues. This is no longer an issue.
2021-03-05 00:49:46 +00:00
DavHau
e16431b466 improve man page for nix.conf (builders) 2021-03-04 16:14:23 +07:00
John Ericson
7ce10924c7 Fix bad wanted output error as requested
- UsageError -> Error

- include drv path too
2021-03-01 15:07:09 +00:00
regnat
df9d4f88d5 Allow substituting drv outputs when building 2021-03-01 14:00:17 +01:00
regnat
5d1c05b075 SubstitutionGoal -> PathSubstitutionGoal
To prepare for the upcoming DrvOutputSubstitutionGoal
2021-03-01 14:00:17 +01:00
Eelco Dolstra
e64cf8e0a3
Merge pull request #4574 from grahamc/libstore-ssh-host-key
libstore: support passing a builder's public SSH host key
2021-03-01 13:12:18 +01:00
John Ericson
4bbd80c536 Throw error for derivation goal with bogus wanted output 2021-02-28 00:19:35 +00:00
John Ericson
ae1441e548 Fix testing fixed-output derivations in double sandboxes
What happened was that Nix was trying to unconditionally mount these
paths in fixed-output derivations, but since the outer derivation was
pure, those paths did not exist. The solution is to only mount those
paths when they exist.
2021-02-27 05:23:14 +00:00
Puck Meerburg
7241fdc3d2 Properly propagate libseccomp linker flags 2021-02-26 23:01:16 +00:00
John Ericson
553b79f8c9 Remove unused redirectedBadOutputs 2021-02-26 16:10:54 +00:00
John Ericson
d560311f76 Remove temporary #if 0...#endif from previous commit 2021-02-26 16:10:52 +00:00
John Ericson
68f4c728ec Split {,local-}derivation-goal.{cc,hh}
This separates the scheduling logic (including simple hook pathway) from
the local-store needing code.

This should be the final split for now. I'm reasonably happy with how
it's turning out, even before I'm done moving code into
`local-derivation-goal`. Benefits:

1. This will help "witness" that the hook case is indeed a lot simpler,
   and also compensate for the increased complexity that comes from
   content-addressed derivation outputs.

2. It also moves us ever so slightly towards a world where we could use
   off-the-shelf storage or sandboxing, since `local-derivation-goal`
   would be gutted in those cases, but `derivation-goal` should remain
   nearly the same.

The new `#if 0` in the new files will be deleted in the following
commit. I keep it here so if it turns out more stuff can be moved over,
it's easy to do so in a way that preserves ordering --- and thus
prevents conflicts.

N.B.
```sh
git diff HEAD^^ --color-moved --find-copies-harder --patience --stat
```
makes nicer output.
2021-02-26 16:10:26 +00:00
John Ericson
05cc5a8587 Copy {,local-}derivation-goal.{cc,h}
Doing this prior to splitting, so we get better diff with default
options (e.g. on GitHub).
2021-02-26 16:01:47 +00:00
Eelco Dolstra
94637cd7e5
Merge pull request #4477 from NixOS/ca/build-remote
Build ca derivations remotely
2021-02-26 16:54:44 +01:00
regnat
f54976d77b Simplify the case where the drv is a purely input-addressed one 2021-02-26 16:35:05 +01:00
Eelco Dolstra
076d2b04da
Update src/libstore/build/derivation-goal.cc 2021-02-26 16:30:12 +01:00
Eelco Dolstra
20ea1de77d Use std::make_unique 2021-02-26 12:35:29 +01:00
Eelco Dolstra
73daffb81b Merge remote-tracking branch 'origin/deduplicate-static-hashes-computation' 2021-02-26 12:30:25 +01:00
regnat
c43f446f4e Make nix copy work without the ca-derivations flag
The experimental feature was by mistake required for `nix copy` to work
at oll
2021-02-25 17:21:51 +01:00
Théophane Hufschmitt
c182aac98a Apply @edolstra stylistic suggestions
Mostly removing useless comments and adding spaces before `&`

Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
2021-02-25 17:21:51 +01:00
regnat
3b76f8f252 Ensure that the ca-derivations bit is set when copying realisations
This should already hold, but better ensure it for future-proof-nees
2021-02-25 17:19:59 +01:00
regnat
f67ff1f575 Don't crash when copying realisations to a non-ca remote
Rather throw a proper exception, and catch&log it on the client side
2021-02-25 17:19:59 +01:00
regnat
2e199673a5 Use RealisedPaths in copyPaths
That way we can copy the realisations too (in addition to the store
paths themselves)
2021-02-25 17:18:48 +01:00
Graham Christensen
1130b28824
distributed builds: load remote builder host key from the machines file
This is already used by Hydra, and is very useful when materializing
a remote builder list from service discovery. This allows the service
discovery tool to only sync one file instead of two.
2021-02-25 09:17:34 -05:00
Shea Levy
98d1b64400
Initialize plugins after handling initial command line flags
This is technically a breaking change, since attempting to set plugin
files after the first non-flag argument will now throw an error. This
is acceptable given the relative lack of stability in a plugin
interface and the need to tie the knot somewhere once plugins can
actually define new subcommands.
2021-02-24 08:22:17 -05:00
Shea Levy
ec3497c1d6
Bail if plugin-files is set after plugins have been loaded.
We know the flag will be ignored but the user wants it to take effect.
2021-02-24 08:20:48 -05:00
Eelco Dolstra
a878c448d8
Merge pull request #4551 from danieldk/system-features-compute-level
Add x86_64 compute levels as system features
2021-02-23 14:30:10 +01:00
regnat
ba1a256d08 Make DerivationGoal::drv a full Derivation
This field used to be a `BasicDerivation`, but this `BasicDerivation`
was downcasted to a `Derivation` when needed (implicitely or not), so we
might as well make it a full `Derivation` and upcast it when needed.

This also allows getting rid of a weird duplication in the way we
compute the static output hashes for the derivation. We had to
do it differently and in a different place depending on whether the
derivation was a full derivation or just a basic drv, but we can now do
it unconditionally on the full derivation.

Fix #4559
2021-02-23 14:15:45 +01:00
regnat
527da73690 Properly bypass the registering step when all outputs are present
There was already some logic for that, but it didn't handle the case of
content-addressed outputs, so extend it a bit for that
2021-02-23 08:04:03 +01:00
regnat
8c385d16ee Also send ca outputs to the build hook
Otherwise they don't get registered, triggering an assertion failure
at some point later
2021-02-23 08:04:03 +01:00
regnat
27b5747ca7 RemoteStore: Send back the new realisations
To allow it to build ca derivations remotely
2021-02-23 08:04:03 +01:00
regnat
a2b69660a9 LegacySSHStore: Send back the new realisations
To allow it to build ca derivations remotely
2021-02-23 08:04:03 +01:00
regnat
5687564a27 LocalStore: Send back the new realisations
To allow it to build ca derivations remotely
2021-02-23 08:04:03 +01:00
regnat
6fbf3fe636 Make the build-hook work with ca derivations
- Pass it the name of the outputs rather than their output paths (as
  these don't exist for ca derivations)
- Get the built output paths from the remote builder
- Register the new received realisations
2021-02-23 08:04:03 +01:00
Shea Levy
35205e2e92
Warn about instability of plugin API 2021-02-22 17:10:55 -05:00
Daniël de Kok
2de232d2b3 Add x86_64 compute levels as additional system types
When performing distributed builds of machine learning packages, it
would be nice if builders without the required SIMD instructions can
be excluded as build nodes.

Since x86_64 has accumulated a large number of different instruction
set extensions, listing all possible extensions would be unwieldy.
AMD, Intel, Red Hat, and SUSE have recently defined four different
microarchitecture levels that are now part of the x86-64 psABI
supplement and will be used in glibc 2.33:

https://gitlab.com/x86-psABIs/x86-64-ABI
https://lwn.net/Articles/844831/

This change uses libcpuid to detect CPU features and then uses them to
add the supported x86_64 levels to the additional system types. For
example on a Ryzen 3700X:

$ ~/aps/bin/nix -vv --version | grep "Additional system"
Additional system types: i686-linux, x86_64-v1-linux, x86_64-v2-linux, x86_64-v3-linux
2021-02-22 09:11:15 +01:00
regnat
f483b623e9 Remove the drv resolution caching mechanism
It isn't needed anymore now that don't need to eagerly resolve
everything like we used to do. So we can safely get rid of it
2021-02-19 15:48:31 +01:00
regnat
4bc28c44f2 Store the output hashes in the initialOutputs of the drv goal
That way we
1. Don't have to recompute them several times
2. Can compute them in a place where we know the type of the parent
  derivation, meaning that we don't need the casting dance we had before
2021-02-19 15:48:31 +01:00
Théophane Hufschmitt
0bfbd04369 Don't expose the "bang" drvoutput syntax
It's not fixed nor useful atm, so better keep it hidden

Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
2021-02-19 15:48:31 +01:00
Théophane Hufschmitt
93d9eb78a0 Syntactic fixes
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
2021-02-19 15:48:31 +01:00
regnat
87c8d3d702 Register the realisations for unresolved drvs
Once a build is done, get back to the original derivation, and register
all the newly built outputs for this derivation.

This allows Nix to work properly with derivations that don't have all
their build inputs available − thus allowing garbage collection and
(once it's implemented) binary substitution
2021-02-19 15:48:31 +01:00
Graham Christensen
f2245091d0
Revert "narinfo: Change NAR URLs to be addressed on the NAR hash instead of the compressed hash" 2021-02-09 12:26:41 -05:00
Eelco Dolstra
ee3846b587
Merge pull request #4464 from tweag/nar-narhash-addressed
narinfo: Change NAR URLs to be addressed on the NAR hash instead of the compressed hash
2021-02-09 14:47:39 +01:00
Eelco Dolstra
480426a364 Add more instrumentation for #4270 2021-02-05 15:57:33 +01:00
Eelco Dolstra
d7c27f21ab
Merge pull request #4372 from tweag/ca/drvoutputs-commands
Add a new Cmd type working on RealisedPaths
2021-02-05 13:03:50 +01:00
Eelco Dolstra
0187838e2e Add a trace to readLine() failures
Hopefully this helps to diagnose 'error: unexpected EOF reading a
line' on macOS.
2021-02-05 12:18:11 +01:00
regnat
e69cfdebb0 Remove the visit machinery in RealisedPath
In addition to being some ugly template trickery, it was also totally
useless as it was used in only one place where I could replace it by
just a few extra characters
2021-02-05 11:42:33 +01:00
regnat
d2091af231 Move the GENERATE_CMP macro to its own file
Despite being an ugly hack, it can probably be useful in a couple extra
places
2021-02-05 11:42:33 +01:00
Théophane Hufschmitt
43d409f669
Fix a whitespace issue
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
2021-02-04 14:47:56 +01:00
Eelco Dolstra
b19aec7eeb
Merge pull request #4461 from NixOS/ca/error-logging-fixes
Fix some logging with ca derivations
2021-01-29 16:12:50 +01:00
regnat
9355ecd543 Add a new Cmd type working on RealisedPaths
Where a `RealisedPath` is a store path with its history, meaning either
an opaque path for stuff that has been directly added to the store, or a
`Realisation` for stuff that has been built by a derivation

This is a low-level refactoring that doesn't bring anything by itself
(except a few dozen extra lines of code :/ ), but raising the
abstraction level a bit is important on a number of levels:

- Commands like `nix build` have to query for the realisations after the
  build is finished which is fragile (see
  27905f12e4a7207450abe37c9ed78e31603b67e1 for example). Having them
  oprate directly at the realisation level would avoid that
- Others like `nix copy` currently operate directly on (built) store
  paths, but need a bit more information as they will need to register
  the realisations on the remote side
2021-01-28 09:38:44 +01:00
Eelco Dolstra
965dc6070a Drop trailing whitespace 2021-01-27 14:04:49 +01:00
regnat
9da11bac57 Fix the error message when a dep is missing
Fix a mismatch in the errors thrown when a needed output was missing
from an input derivation that was leading to a wrong and quite misleading error
message
2021-01-26 14:49:23 +01:00
regnat
d3c4284133 Make the error message for missing outputs more useful
Don't only show the name of the output, but also the derivation to which
this output belongs (as otherwise it's very hard to track back what went
wrong)
2021-01-26 14:49:23 +01:00
Eelco Dolstra
3ba98ba8f0 Tell user to run 'nix log' to get full build logs 2021-01-25 17:15:38 +01:00
Eelco Dolstra
488a826842
Merge pull request #4467 from edolstra/error-formatting
Improve error formatting
2021-01-25 12:50:57 +01:00
Eelco Dolstra
c5b42c5a42
Merge pull request #4470 from matthewbauer/fix-4469
Handle missing etag in 304 Not Modified response
2021-01-25 12:50:13 +01:00
Eelco Dolstra
680d8a5b86
Merge pull request #4387 from obsidiansystems/non-local-store-build
Make `nix-build --store whatever` work
2021-01-25 12:24:23 +01:00
Matthew Bauer
a766824660 Handle missing etag in 304 Not Modified response
GitHub now omits the etag, but 304 implies it matches the one we
provided. Just use that one to avoid having an etag-less resource.

Fixes #4469
2021-01-22 14:47:45 -06:00
John Ericson
53a709535b Apply suggestions from code review
Thanks!

Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
2021-01-22 15:58:58 +00:00
John Ericson
8c07ed1dda Improve documentation and test and requested 2021-01-22 15:58:58 +00:00
Eelco Dolstra
8d4268d190 Improve error formatting
Changes:

* The divider lines are gone. These were in practice a bit confusing,
  in particular with --show-trace or --keep-going, since then there
  were multiple lines, suggesting a start/end which wasn't the case.

* Instead, multi-line error messages are now indented to align with
  the prefix (e.g. "error: ").

* The 'description' field is gone since we weren't really using it.

* 'hint' is renamed to 'msg' since it really wasn't a hint.

* The error is now printed *before* the location info.

* The 'name' field is no longer printed since most of the time it
  wasn't very useful since it was just the name of the exception (like
  EvalError). Ideally in the future this would be a unique, easily
  googleable error ID (like rustc).

* "trace:" is now just "…". This assumes error contexts start with
  something like "while doing X".

Example before:

  error: --- AssertionError ---------------------------------------------------------------------------------------- nix
  at: (7:7) in file: /home/eelco/Dev/nixpkgs/pkgs/applications/misc/hello/default.nix

       6|
       7|   x = assert false; 1;
        |       ^
       8|

  assertion 'false' failed
  ----------------------------------------------------- show-trace -----------------------------------------------------
  trace: while evaluating the attribute 'x' of the derivation 'hello-2.10'
  at: (192:11) in file: /home/eelco/Dev/nixpkgs/pkgs/stdenv/generic/make-derivation.nix

     191|         // (lib.optionalAttrs (!(attrs ? name) && attrs ? pname && attrs ? version)) {
     192|           name = "${attrs.pname}-${attrs.version}";
        |           ^
     193|         } // (lib.optionalAttrs (stdenv.hostPlatform != stdenv.buildPlatform && !dontAddHostSuffix && (attrs ? name || (attrs ? pname && attrs ? version)))) {

Example after:

  error: assertion 'false' failed

         at: (7:7) in file: /home/eelco/Dev/nixpkgs/pkgs/applications/misc/hello/default.nix

              6|
              7|   x = assert false; 1;
               |       ^
              8|

         … while evaluating the attribute 'x' of the derivation 'hello-2.10'

         at: (192:11) in file: /home/eelco/Dev/nixpkgs/pkgs/stdenv/generic/make-derivation.nix

            191|         // (lib.optionalAttrs (!(attrs ? name) && attrs ? pname && attrs ? version)) {
            192|           name = "${attrs.pname}-${attrs.version}";
               |           ^
            193|         } // (lib.optionalAttrs (stdenv.hostPlatform != stdenv.buildPlatform && !dontAddHostSuffix && (attrs ? name || (attrs ? pname && attrs ? version)))) {
2021-01-21 11:02:09 +01:00
adisbladis
144cad9069
narinfo: Change NAR URLs to be addressed on the NAR hash instead of the compressed hash
This change is to simplify [Trustix](https://github.com/tweag/trustix) indexing and makes it possible to reconstruct this URL regardless of the compression used.

In particular this means that 7c2e9ca597/contrib/nix/nar/nar.go (L61-L71) can be removed and only the bits that are required to establish trust needs to be published in the Trustix build logs.
2021-01-21 10:32:56 +01:00
Eelco Dolstra
ea756b3654 --refresh: Imply setting .narinfo disk cache TTL to 0 2021-01-18 14:38:31 +01:00
regnat
9432c170e7 Fix the drv output map for non ca derivations
With the `ca-derivation` experimental features, non-ca derivations used
to have their output paths returned as unknown as long as they weren't
built (because of a mistake in the code that systematically erased the
previous value)
2021-01-18 11:01:39 +01:00
John Ericson
7af743470c Make public keys and requireSigs local-store specific again
Thanks @regnat and @edolstra for catching this and comming up with the
solution.

They way I had generalized those is wrong, because local settings for
non-local stores is confusing default. And due to the nature of C++
inheritance, fixing the defaults is more annoying than it should be.
Additionally, I thought we might just drop the check in the substitution
logic since `Store::addToStore` is now streaming, but @regnat rightfully
pointed out that as it downloads dependencies first, that would still be
too late, and also waste effort on possibly unneeded/unwanted
dependencies.

The simple and correct thing to do is just make a store method for the
boolean logic, keeping all the setting and key stuff the way it was
before. That new method is both used by `LocalStore::addToStore` and the
substitution goal check. Perhaps we might eventually make it fancier,
e.g. sending the ValidPathInfo to remote stores for them to validate,
but this is good enough for now.
2021-01-15 16:37:41 +00:00
John Ericson
0027b05a15 Merge remote-tracking branch 'upstream/master' into non-local-store-build 2021-01-15 02:01:24 +00:00
Eelco Dolstra
61216d32e1 Add 'nix store repair' command 2021-01-13 23:27:39 +01:00
Eelco Dolstra
4e9cec79bf
Merge pull request #4444 from matthewbauer/unset-curproc-arch-affinity
Set kern.curproc_arch_affinity=0 to escape Rosetta
2021-01-13 12:16:53 +01:00
Rickard Nilsson
0ca1a50132 Remove a redundant condition in DerivationGoal::tryLocalBuild() 2021-01-13 10:13:51 +01:00
Matthew Bauer
f69820417f Set kern.curproc_arch_affinity=0 to escape Rosetta
By default, once you enter x86_64 Rosetta 2, macOS will try to run
everything in x86_64. So an x86_64 Nix will still try to use x86_64
even when system = aarch64-darwin. To avoid this we can set
kern.curproc_arch_affinity sysctl. With kern.curproc_arch_affinity=0,
we ignore this preference.

This is based on how
https://opensource.apple.com/source/system_cmds/system_cmds-880.40.5/arch.tproj/arch.c.auto.html
works. Completely undocumented, but seems to work!

Note, you can verify this works with this impure Nix expression:

```
  {
    a = derivation {
      name = "a";
      system = "aarch64-darwin";
      builder = "/bin/sh";
      args = [ "-e" (builtins.toFile "builder" ''
        [ "$(/usr/bin/arch)" = arm64 ]
        [ "$(/usr/bin/arch -arch x86_64 /bin/sh -c /usr/bin/arch)" = i386 ]
        [ "$(/usr/bin/arch -arch arm64 /bin/sh -c /usr/bin/arch)" = arm64 ]
        /usr/bin/touch $out
      '') ];
    };

    b = derivation {
      name = "b";
      system = "x86_64-darwin";
      builder = "/bin/sh";
      args = [ "-e" (builtins.toFile "builder" ''
        [ "$(/usr/bin/arch)" = i386 ]
        [ "$(/usr/bin/arch -arch x86_64 /bin/sh -c /usr/bin/arch)" = i386 ]
        [ "$(/usr/bin/arch -arch arm64 /bin/sh -c /usr/bin/arch)" = arm64 ]
        /usr/bin/touch $out
      '') ];
    };
  }
```
2021-01-11 22:40:21 -06:00
Rickard Nilsson
44fd7a05b6 Don't let 'preferLocalBuild' override 'max-jobs=0'
This resolves #3810 by changing the behavior of `max-jobs = 0`, so
that specifying the option also avoids local building of derivations
with the attribute `preferLocalBuild = true`.
2021-01-12 01:28:00 +01:00
Eelco Dolstra
6548b89cc4 string2Int(): Return std::optional 2021-01-08 12:22:21 +01:00
Eelco Dolstra
0813350349 Add 'nix store prefetch-{file,tarball}'
These replace nix-prefetch-url and nix-prefetch-url --unpack,
respectively.
2021-01-07 21:51:46 +01:00
Eelco Dolstra
0df69d96e0 Make sodium a required dependency 2021-01-06 17:56:53 +01:00
Eelco Dolstra
555152ffe8 crypto.cc: API cleanup and add generate() / to_string() methods 2021-01-06 17:04:46 +01:00
Eelco Dolstra
3edcb198e5
Merge pull request #4310 from matthewbauer/rosetta2-extra-platforms
Add x86_64-darwin and aarch64 to "extra-platforms" automatically when Rosetta2 is detected
2021-01-06 11:31:13 +01:00
Eelco Dolstra
8af4f886e2 Fix deadlock in LocalStore::addSignatures()
Fixes #4367.
2021-01-05 11:47:29 +01:00
Eelco Dolstra
6262a70363
scanForReferences: Remove misleading comment
References have always been determined only by the hash part, not the
name or the store prefix.

Fixes #4396.
2020-12-28 17:21:19 +01:00
John Ericson
fed1237246 Test nix-build with non-local-store --store
Just a few small things needed fixing!
2020-12-23 22:42:06 +00:00
John Ericson
85f2e9e8fa Expose schedule entrypoints to all stores
Remote stores still override so the other end schedules.
2020-12-23 22:42:06 +00:00
John Ericson
450c3500f1 Crudely make worker only provide a Store, not LocalStore
We downcast in a few places, this will be refactored to be better later.
2020-12-23 22:42:06 +00:00
John Ericson
57062179ce Move some PKI stuff from LocalStore to Store 2020-12-23 22:42:06 +00:00
Eelco Dolstra
8927cba62f
Merge pull request #4366 from NixOS/readInvalidDerivation-on-remote-caches
Use the fs accessor for readInvalidDerivation
2020-12-23 11:55:52 +01:00
John Ericson
1a1af75338 Overhaul store subclassing
We embrace virtual the rest of the way, and get rid of the
`assert(false)` 0-param constructors.

We also list config base classes first, so the constructor order is
always:

  1. all the configs
  2. all the stores

Each in the same order
2020-12-20 15:47:14 +00:00
regnat
4d45839499 Fix the detection of already built drv outputs
PRs #4370 and #4348 had a bad interaction in that the second broke the fist
one in a not trivial way.

The issue was that since #4348 the logic for detecting whether a
derivation output is already built requires some logic that was specific
to the `LocalStore`.

It happens though that most of this logic could be upstreamed to any `Store`,
which is what this commit does.
2020-12-17 11:35:24 +01:00
Eelco Dolstra
ae3c3e3bb2
Merge pull request #4370 from NixOS/ca/more-precise-build-noop
Better detect when `buildPaths` would be a no-op
2020-12-16 14:54:04 +01:00
regnat
cac8d5b742 Don't ignore an absent drv file in queryPartialDrvOutputMap
This ignore was here because `queryPartialDrvOutputMap` was used both
1. as a cache to avoid having to re-read the derivation (when gc-ing for
example), and
2. as the source of truth for ca realisations

The use-case 2. required it to be able to work even when the derivation
wasn't there anymore (see https://github.com/NixOS/nix/issues/4138).
However, this use-case is now handled by `queryRealisation`, meaning
that we can safely error out if the derivation isn't there anymore
2020-12-16 13:36:17 +01:00
Eelco Dolstra
3765174691
Merge pull request #4348 from NixOS/ca/use-hashmodulo
Use the hash modulo in the derivation outputs
2020-12-16 12:48:44 +01:00
regnat
962b82ef25 Fix BinaryCacheStore::registerDrvOutput
Was crashing because coercing a json document into a string is only
valid if the json is a string, otherwise we need to call `.dump()`
2020-12-16 10:54:36 +01:00
regnat
6e899278d3 Better detect when buildPaths would be a no-op
`buildPaths` can be called even for stores where it's not defined in case it's
bound to be a no-op.
The “no-op detection” mechanism was only detecting the case wher `buildPaths`
was called on a set of (non-drv) paths that were already present on the store.

This commit extends this mechanism to also detect the case where `buildPaths`
is called on a set of derivation outputs which are already built on the store.

This only works with the ca-derivations flag. It could be possible to
extend this to also work without it, but it would add quite a bit of
complexity, and it's not used without it anyways.
2020-12-16 10:36:16 +01:00
regnat
7080321618 Use the fs accessor for readInvalidDerivation
Extend `FSAccessor::readFile` to allow not checking that the path is a
valid one, and rewrite `readInvalidDerivation` using this extended
`readFile`.

Several places in the code use `readInvalidDerivation`, either because
they need to read a derivation that has been written in the store but
not registered yet, or more generally to prevent a deadlock because
`readDerivation` tries to lock the state, so can't be called from a
place where the lock is already held.
However, `readInvalidDerivation` implicitely assumes that the store is a
`LocalFSStore`, which isn't always the case.

The concrete motivation for this is that it's required for `nix copy
--from someBinaryCache` to work, which is tremendously useful for the
tests.
2020-12-15 20:10:46 +01:00
regnat
44c3fbc6e0 Fix addTextToStore for binary caches
Because of a too eager refactoring, `addTextToStore` used to throw an
error because the input wasn't a valid nar.

Partially revert that refactoring to wrap the text into a proper nar
(using `dumpString`) to make this method work again
2020-12-15 09:38:19 +01:00
Eelco Dolstra
f2f60bf5d6
Merge pull request #4330 from NixOS/ca/properly-store-outputs
Properly store the outputs of CA derivations − take 2
2020-12-14 15:01:23 +01:00
Eelco Dolstra
92438c70d2
Merge pull request #4352 from jonringer/allow-private-caches
treat s3 permission errors as file-not-found
2020-12-13 13:39:20 +01:00
regnat
e9b39f6004 Restrict the operations on drv outputs in recursive Nix
There's currently no way to properly filter them, so disallow them
altogether instead.
2020-12-11 21:17:25 +01:00
regnat
bab1cda0e6 Use the hash modulo in the derivation outputs
Rather than storing the derivation outputs as `drvPath!outputName` internally,
store them as `drvHashModulo!outputName` (or `outputHash!outputName` for
fixed-output derivations).

This makes the storage slightly more opaque, but enables an earlier
cutoff in cases where a fixed-output dependency changes (but keeps the
same output hash) − same as what we already do for input-addressed
derivations.
2020-12-11 21:17:23 +01:00
regnat
8914e01e37 Store the realisations as JSON in the binary cache
Fix #4332
2020-12-11 21:05:09 +01:00
regnat
3ac9d74eb1 Rework the db schema for derivation outputs
Add a new table for tracking the derivation output mappings.

We used to hijack the `DerivationOutputs` table for that, but (despite its
name), it isn't a really good fit:

- Its entries depend on the drv being a valid path, making it play badly with
  garbage collection and preventing us to copy a drv output without copying
  the whole drv closure too;
- It dosen't guaranty that the output path exists;

By using a different table, we can experiment with a different schema better
suited for tracking the output mappings of CA derivations.
(incidentally, this also fixes #4138)
2020-12-11 20:41:32 +01:00
regnat
58cdab64ac Store metadata about drv outputs realisations
For each known realisation, store:
- its output
- its output path

This comes with a set of needed changes:

- New `realisations` module declaring the types needed for describing
  these mappings
- New `Store::registerDrvOutput` method registering all the needed informations
  about a derivation output (also replaces `LocalStore::linkDeriverToPath`)
- new `Store::queryRealisation` method to retrieve the informations for a
  derivations

This introcudes some redundancy on the remote-store side between
`wopQueryDerivationOutputMap` and `wopQueryRealisation`.
However we might need to keep both (regardless of backwards compat)
because we sometimes need to get some infos for all the outputs of a
derivation (where `wopQueryDerivationOutputMap` is handy), but all the
stores can't implement it − because listing all the outputs of a
derivation isn't really possible for binary caches where the server
doesn't allow to list a directory.
2020-12-11 20:41:32 +01:00
Michael Bishop
63b3536f50
treat s3 permission errors as file-not-found
Signed-off-by: Jonathan Ringer <jonringer117@gmail.com>
2020-12-11 09:49:24 -08:00
Eelco Dolstra
253571e4ec
Merge pull request #4342 from tweag/fix-remote-build-hook
fix remote build hook
2020-12-09 12:40:00 +01:00
Maximilian Bosch
93a8a005de
libstore/openStore: fix stores with IPv6 addresses
In `nixStable` (2.3.7 to be precise) it's possible to connect to stores
using an IPv6 address:

  nix ping-store --store ssh://root@2001:db8::1

This is also useful for `nixops(1)` where you could specify an IPv6
address in `deployment.targetHost`.

However, this behavior is broken on `nixUnstable` and fails with the
following error:

  $ nix store ping --store ssh://root@2001:db8::1
  don't know how to open Nix store 'ssh://root@2001:db8::1'

This happened because `openStore` from `libstore` uses the `parseURL`
function from `libfetchers` which expects a valid URL as defined in
RFC2732. However, this is unsupported by `ssh(1)`:

  $ nix store ping --store 'ssh://root@[2001:db8::1]'
  cannot connect to 'root@[2001:db8::1]'

This patch now allows both ways of specifying a store (`root@2001:db8::1`) and
also `root@[2001:db8::1]` since the latter one is useful to pass query
parameters to the remote store.

In order to achieve this, the following changes were made:

* The URL regex from `url-parts.hh` now allows an IPv6 address in the
  form `2001:db8::1` and also `[2001:db8::1]`.

* In `libstore`, a new function named `extractConnStr` ensures that a
  proper URL is passed to e.g. `ssh(1)`:

  * If a URL looks like either `[2001:db8::1]` or `root@[2001:db8::1]`,
    the brackets will be removed using a regex. No additional validation
    is done here as only strings parsed by `parseURL` are expected.

  * In any other case, the string will be left untouched.

* The rules above only apply for `LegacySSHStore` and `SSHStore` (a.k.a
  `ssh://` and `ssh-ng://`).

Unresolved questions:

* I'm not really sure whether we want to allow both variants of IPv6
  addresses in the URL parser. However it should be noted that both seem
  to be possible according to RFC2732:

  > This document incudes an update to the generic syntax for Uniform
  > Resource Identifiers defined in RFC 2396 [URL].  It defines a syntax
  > for IPv6 addresses and allows the use of "[" and "]" within a URI
  > explicitly for this reserved purpose.

* Currently, it's not supported to specify a port number behind the
  hostname, however it seems as this is not really supported by the URL
  parser. Hence, this is probably out of scope here.
2020-12-09 12:23:29 +01:00
regnat
c87267c2a4 Store the final drv outputs in memory when building remotely
The `DerivationGoal` has a variable storing the “final” derivation
output paths that is used (amongst other things) to fill the environment
for the post build hook. However this variable wasn't set when the
build-hook is used, causing a crash when both hooks are used together.

Fix this by setting this variable (from the informations in the db) after a run
of the post build hook.
2020-12-09 10:45:12 +01:00
regnat
6758e65612 Revert "Re-query for the derivation outputs in the post-build-hook"
This reverts commit 1b1e076033.

Using `queryPartialDerivationOutputMap` assumes that the derivation
exists locally which isn't the case for remote builders.
2020-12-09 09:44:07 +01:00
Eelco Dolstra
82e5511594
Merge pull request #4325 from tweag/hide-local-store-sql-statements
Hide the sqlite statements declarations for the local store
2020-12-08 14:04:16 +01:00
regnat
c0f21f08f8 Hide the sqlite statements declarations for the local store
These have no need to be in the public interface and it causes spurious
rebuilds each time one wants to add or remove a new statement.
2020-12-08 13:29:13 +01:00
regnat
1b1e076033 Re-query for the derivation outputs in the post-build-hook
We can't assume that the runtime state knows about them as they might have
been built remotely, in which case we must query the db again to get
them.
2020-12-08 11:11:02 +01:00
Matthew Bauer
aa07502009 Always default to cache.nixos.org even when different nix store dir
Since 0744f7f, it is now useful to have cache.nixos.org in substituers
even if /nix/store is not the Nix Store Dir. This can always be
overridden via configuration, though.
2020-12-06 23:04:42 -06:00
Eelco Dolstra
1d1a85eb0a
Merge pull request #4318 from matthewbauer/add-slash-to-trusted-binary-cache
Canonicalize binary caches with ‘/’ when one is missing
2020-12-05 10:17:17 +01:00
Matthew Bauer
b9a00fd15b Canonicalize binary caches with ‘/’ when one is missing
This checks if there is a trusted substituter with a slash, so
trusting https://cache.nixos.org also implies https://cache.nixos.org/
is trusted.
2020-12-04 22:17:19 -06:00
Matthew Bauer
3c9b7029ba Use com.apple.oahd.plist for rosetta 2 detection 2020-12-04 13:26:53 -06:00
Stéphan Kochen
e20a3ec756 Fix compatibility with newer AWS SDKs
Tested against AWS SDK 1.8.99. Fixes #3201.
2020-12-04 19:36:09 +01:00
Matthew Bauer
4b9acf4e21 Use posix_spawn_setbinpref_np to advise which architecture to run
When running universal binaries like /bin/bash, Darwin XNU will choose
which architecture of the binary to use based on "binary preferences".
This change sets that to the current platform for aarch64 and x86_64
builds. In addition it now uses posix_spawn instead of the usual
execve. Note, that this does not prevent the other architecture from
being run, just advises which to use.

Unfortunately, posix_spawnattr_setbinpref_np does not appear to be
inherited by child processes in x86_64 Rosetta 2 translations, meaning
that this will not always work as expected.

For example:

  {
    arm = derivation {
      name = "test";
      system = "aarch64-darwin";
      builder = "/bin/bash";
      args = [ "-e" (builtins.toFile "test" ''
        set -x
        /usr/sbin/sysctl sysctl.proc_translated
        /usr/sbin/sysctl sysctl.proc_native
        [ "$(/usr/bin/arch)" = arm64 ]
        /usr/bin/touch $out
      '') ];
    };
    rosetta = derivation {
      name = "test";
      system = "x86_64-darwin";
      builder = "/bin/bash";
      args = [ "-e" (builtins.toFile "test" ''
        set -x
        /usr/sbin/sysctl sysctl.proc_translated
        /usr/sbin/sysctl sysctl.proc_native
        [ "$(/usr/bin/arch)" = i386 ]
        echo It works!
        /usr/bin/touch $out
      '') ];
    };
  }

`arm' fails on x86_64-compiled Nix, but `arm' and `rosetta' succeed on
aarch64-compiled Nix. I suspect there is a way to fix this since:

  $ /usr/bin/arch -arch x86_64 /bin/bash \
    -c '/usr/bin/arch -arch arm64e /bin/bash -c /usr/bin/arch'
  arm64

seems to work correctly. We may need to wait for Apple to update
system_cmds in opensource.apple.com to find out how though.
2020-12-03 15:41:59 -06:00
Matthew Bauer
9b1824ecbd Add extraPlatforms for Rosetta 2 macOS
macOS systems with ARM64 can utilize a translation layer at
/Library/Apple/usr/libexec/oah to run x86_64 binaries. This change
makes Nix recognize that and it to "extra-platforms". Note that there
are two cases here since Nix could be built for either x86_64 or
aarch64. In either case, we can switch to the other architecture.
Unfortunately there is not a good way to prevent aarch64 binaries from
being run in x86_64 contexts or vice versa - programs can always
execute programs for the other architecture.
2020-12-03 15:41:43 -06:00
regnat
0afab668fa Don't fail early when -j0 is passed
If the build closure contains some CA derivations, then we can't know
ahead-of-time that we won't build anything as early-cutoff might come-in
at a laster stage
2020-12-03 13:24:36 +01:00
Greg Hale
d8fc1bb7b0 fix tokens documentation 2020-12-02 10:15:18 -05:00
Eelco Dolstra
1b79b5b983 read(): Use char * instead of unsigned char *
This gets rid of some pointless casts.
2020-12-02 14:17:27 +01:00
Eelco Dolstra
faa31f4084 Sink: Use std::string_view 2020-12-02 14:17:27 +01:00
Eelco Dolstra
e5cf501c77
Merge pull request #4284 from tweag/fixed-output-depending-on-ca
Allow fixed-output derivations to depend on (floating) content-addressed ones
2020-12-01 20:25:41 +01:00
regnat
438977731c shut up clang warnings
- Fix some class/struct discrepancies
- Explicit the overloading of `run` in the `Cmd*` classes
- Ignore a warning in the generated lexer
2020-12-01 15:04:03 +01:00
Eelco Dolstra
3b7e00ce22 Move primeCache() to Worker::run()
We need the missing path info to communicate the worker's remaining
goals to the progress bar.
2020-12-01 13:44:48 +01:00
regnat
9bd8184f1f Allow fixed-output derivations to depend on (floating) content-addressed ones
Fix an overlook of https://github.com/NixOS/nix/pull/4056
2020-11-27 15:39:24 +01:00
regnat
13c557fe82 fix the hash rewriting for ca-derivations 2020-11-25 11:33:00 +01:00
John Ericson
2113ae2d85 Make drv hash modulo memo table thread-safe
Let's get one step closer to the daemon not needing to fork.
2020-11-19 16:50:06 +00:00
Eelco Dolstra
df5c69a94e
Merge pull request #4180 from Ma27/ssh-ng-substitute
Allow substituting paths when building remotely using `ssh-ng://`
2020-11-17 14:01:04 +01:00
Eelco Dolstra
e6b7c7b79c Cleanup 2020-11-17 13:58:55 +01:00
Eelco Dolstra
bccff827dc Fix deadlock in IFD through the daemon
Fixes #4235.
2020-11-17 13:50:36 +01:00
regnat
7de21f6664 Make the sql debug statements more useful
Print the expanded sql query (with the variables bound to their value) rather
than the original one in case of error
2020-11-17 10:05:45 +01:00
Jake Waksbaum
01db455733 Fix deadlock in nix-store when max-connections=1
This fixes a bug I encountered where `nix-store -qR` will deadlock when
the `--include-outputs` flag is passed and `max-connections=1`.

The deadlock occurs because `RemoteStore::queryDerivationOutputs` takes
the only connection from the connection pool and uses it to check the
daemon version. If the version is new enough, it calls
`Store::queryDerivationOutputs`, which eventually calls
`RemoteStore::queryPartialDerivationOutputMap`, where we take another
connection from the connection pool to check the version again. Because
we still haven't released the connection from the caller, this waits for
a connection to be available, causing a deadlock.

This diff solves the issue by using `getProtocol` to check the protocol
version in the caller `RemoteStore::queryDerivationOutputs`, which
immediately frees the connection back to the pool before returning the
protocol version. That way we've already freed the connection by the
time we call `RemoteStore::queryPartialDerivationOutputMap`.
2020-11-16 02:35:50 -05:00
Maximilian Bosch
3a63fc6cd5
Allow substituting paths when building remotely using ssh-ng://
Until now, it was not possible to substitute missing paths from e.g.
`https://cache.nixos.org` on a remote server when building on it using
the new `ssh-ng` protocol.

This is because every store implementation except legacy `ssh://`
ignores the substitution flag passed to `Store::queryValidPaths` while
the `legacy-ssh-store` substitutes the remote store using
`cmdQueryValidPaths` when the remote store is opened with `nix-store
--serve`.

This patch slightly modifies the daemon protocol to allow passing an
integer value suggesting whether to substitute missing paths during
`wopQueryValidPaths`. To implement this on the daemon-side, the
substitution logic from `nix-store --serve` has been moved into a
protected method named `Store::substitutePaths` which gets currently
called from `LocalStore::queryValidPaths` and `Store::queryValidPaths`
if `maybeSubstitute` is `true`.

Fixes #2770
2020-11-05 20:12:37 +01:00
Eelco Dolstra
e8c379555f LocalStore: Get rid of recursive_mutex 2020-11-03 14:45:24 +01:00
Eelco Dolstra
797a52e31d Add FIXME 2020-11-03 14:45:24 +01:00
Eelco Dolstra
7cf874c17d Don't use readDerivation() in addValidPath()
readDerivation() requires a valid path.

Fixes #4210.
2020-11-02 18:46:44 +01:00
Eelco Dolstra
ab2ef851b6
Merge pull request #4207 from hercules-ci/fix-RemoteStore-filterSource-deadlock
Fix RemoteStore pool deadlock in filterSource etc
2020-11-02 14:46:10 +01:00
Eelco Dolstra
db5424bf09 Don't send eval-related settings to the daemon 2020-11-02 13:57:58 +01:00
Robert Hensing
e8a45d07bc Restore RestrictedStore.addToStoreFromDump implementation
It was accidentally removed in commit ca30abb3fb
2020-10-31 23:56:03 +01:00
Robert Hensing
2192cac634 Fix RemoteStore pool deadlock in filterSource etc 2020-10-30 21:47:34 +01:00
Eelco Dolstra
ff4dea63c9 Generalize extra-* settings
This removes the extra-substituters and extra-sandbox-paths settings
and instead makes every array setting extensible by setting
"extra-<name> = <value>" in the configuration file or passing
"--<name> <value>" on the command line.
2020-10-29 18:17:39 +01:00
stev
869c0321ff Alter "wanted:" to "specified:" in hash mismatch output
This makes it even clearer which of the two hashes was specified in the
nix files. Some may think that "wanted" and "got" is obvious, but:
"got" could mean "got in nix file" and "wanted" could mean "want to see in nix file".
2020-10-29 00:33:14 +01:00
Eelco Dolstra
02a1facbdc
Merge pull request #4056 from tweag/non-ca-depending-on-ca
Allow non-CA derivations to depend on CA ones
2020-10-27 17:38:29 +01:00
regnat
bc081bcd81 Inline unkownHashes
See https://github.com/NixOS/nix/pull/4056#discussion_r493661632
2020-10-27 07:29:25 +01:00
regnat
c092fa4702 Allow non-CA derivations to depend on CA derivations 2020-10-27 07:29:23 +01:00
Christian Kampka
461cf2b856
Add NIX_CONFIG env var for applying nix.conf overrides 2020-10-21 13:41:26 +02:00
Eelco Dolstra
fda835b231
Merge pull request #4143 from obsidiansystems/typed-goal-maps
Properly type the derivation and substitution goal maps
2020-10-18 18:12:21 +02:00
Robert Hensing
bd9eb5c743 DerivationGoal: only retry if output closure incomplete is only problem 2020-10-18 14:26:37 +02:00
Robert Hensing
94f1e4a441 Typo 2020-10-18 14:26:37 +02:00
John Ericson
7ed46c1574 Explain that upcast_goal is still a static cast 2020-10-17 21:50:12 +00:00
John Ericson
57d0432b39 Just use auto in two places. 2020-10-17 21:47:52 +00:00
John Ericson
e6f8ae56d8 tab -> space 2020-10-17 21:45:31 +00:00
John Ericson
0fefc2a439 Merge remote-tracking branch 'upstream/master' into typed-goal-maps 2020-10-14 20:49:01 +00:00
Eelco Dolstra
11882d7c7c Create /etc/passwd *after* figuring out the sandbox uid/gid
Fixes build failures like

  # nix log /nix/store/gjaa0psfcmqvw7ivggsncx9w364p3s8s-sshd.conf-validated.drv
  No user exists for uid 30012
2020-10-14 12:20:58 +02:00
John Ericson
55592b253f Add some more docs 2020-10-13 18:04:24 +00:00
John Ericson
13804f126e Merge remote-tracking branch 'upstream/master' into typed-goal-maps 2020-10-13 18:02:32 +00:00