I don't love the way this code looks. There are two larger problems:
- eval, build/scratch, destination stores (#5025) should have different
types to reflect the fact that they are used for different purposes
and those purposes correspond to different operations. It should be
impossible to "use the wrong store" in my cases.
- Since drvs can end up in both the eval and build/scratch store, we
should have some sort of union/layered store (not on the file sytem
level, just conceptual level) that allows accessing both. This would
get rid of the ugly "check both" boilerplate in this PR.
Still, it might be better to land this now / soon after minimal cleanup,
so we have a concrete idea of what problem better abstractions are
supposed to solve.
Below the comment added by this commit is a much longer comment
followed by a trust check, both of which have confused me on at
least two occasions. I figured it out once, forgot it, then had to
ask @Ericson2314 to explain it, at which point I understood it
again. I think this might confuse other people too, or maybe I will
just forget it a third time. So let's add a comment.
Farther down in the function is the following check:
```
if (!(drvType.isCA() || trusted))
throw Error("you are not privileged to build input-addressed derivations");
```
This seems really strange at first. A key property of Nix is that
you can compute the outpath of a derivation using the derivation
(and its references-closure) without trusting anybody!
The missing insight is that at this point in the code the builder
doesn't necessarily have the references-closure of the derivation
being built, and therefore needs to trust that the derivation's
outPath is honest. It's incredibly easy to overlook this, because
the only difference between these two cases is which of these
identically-named functions we used:
- `readDerivation(Source,Store)`
- `Store::readDerivation()`
These functions have different trust models (except in the special
case where the first function is used on the local store). We
should call the reader's attention to this fact.
Co-authored-by: Cole Helbling <cole.e.helbling@outlook.com>
In https://github.com/NixOS/nix/pull/6134#issuecomment-1079199888,
@thuffschmitt proposed exposing `LegacySSHStore` in Nix for
deduplication with Hydra, at least temporarily. I think that is a good
idea.
Note that the diff will look bad unless one ignores whitespace! Also try
this locally:
```shell-session
git diff --ignore-all-space HEAD^:src/libstore/legacy-ssh-store.cc HEAD:src/libstore/legacy-ssh-store.cc
git diff --ignore-all-space HEAD^:src/libstore/legacy-ssh-store.cc HEAD:src/libstore/legacy-ssh-store.hh
```
* document `fetchTree`
* display experimental feature note at the top
we have to enable the new `fetchTree` experimental feature to render it
at all. this was a bug introduced when adding that new feature flag.
Co-authored-by: tomberek <tomberek@users.noreply.github.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Silvan Mosberger <github@infinisil.com>
The code has already been fixed (yay!) so what is left of this commit is
just updating the API docs.
Co-authored-by: Cole Helbling <cole.e.helbling@outlook.com>
According https://en.cppreference.com/w/cpp/io/strstream, it has been
deprecated since C++98! The Clang + Linux build systems to not have it
at all, or at least be hiding it.
We can just use `std::stringstream` instead, I think.
* Print the value in `error: cannot coerce` messages
This extends the `error: cannot coerce a TYPE to a string` message
to print the value that could not be coerced. This helps with debugging
by making it easier to track down where the value is being produced
from, especially in errors with deep or unhelpful stack traces.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This is needed for building CA deriations with a src store / dest store
split. In particular it is needed for Hydra.
https://github.com/NixOS/hydra/issues/838 currently puts realizations,
and thus build outputs, in the local store, but it should not.
This includes position information in more places, making debugging
easier.
Before:
```
$ nix-instantiate --show-trace --eval tests/functional/lang/eval-fail-using-set-as-attr-name.nix
error:
… while evaluating an attribute name
at «none»:0: (source not available)
error: value is a set while a string was expected
```
After:
```
error:
… while evaluating an attribute name
at /pwd/lang/eval-fail-using-set-as-attr-name.nix:5:10:
4| in
5| attr.${key}
| ^
6|
error: value is a set while a string was expected
```
In the process, partially undo e89b5bd0bf
in that the ancient < 2.4 version is now supported again by the
serializer again. `LegacySSHStore`, instead of also asserting that the
version is at least 4, just checks that `narHash` is set.
This allows us to better test the serializer in isolation for both
versions (< 4 and >= 4).
AppleDouble files were extracted differently on macOS machines than on other
UNIX's.
Setting `archive_read_set_format_option(this->archive, NULL ,"mac-ext",NULL)`
fixes this problem, since it just ignores the AppleDouble file and treats it as
a normal one.
This was a problem since it caused source archives to be different between macOS
and Linux.
Ref: nixos/nix#9290
* Factor out the default `MultiCommand` behavior
All the `MultiCommand`s had (nearly) the same behavior when called
without a subcommand.
Factor out this behavior into the `NixMultiCommand` class.
* Display the list of available subcommands when none is specified
Whenever a user runs a command that excepts a subcommand, add the list
of available subcommands to the error message.
* Print the multi-command lists as Markdown lists
This takes more screen real estate, but is also much more readable than
a comma-separated list
without knowing a lot of context, it's not clear who "we" are in that
text. I'm also strongly opposed to adding procedural notes into
a reference manual; it just won't age well.
this change leaves a factual description of the experimental feature and
its purpose.
- remove prose for the default value, which is shown programmatically
- add note on how this relates to `cores`
- add link to mentioned derivation attribute
Today, with the tests inside a `tests` intermingled with the
corresponding library's source code, we have a few problems:
- We have to be careful that wildcards don't end up with tests being
built as part of Nix proper, or test headers being installed as part
of Nix proper.
- Tests in libraries but not executables is not right:
- It means each executable runs the previous unit tests again, because
it needs the libraries.
- It doesn't work right on Windows, which doesn't want you to load a
DLL just for the side global variable . It could be made to work
with the dlopen equivalent, but that's gross!
This reorg solves these problems.
There is a remaining problem which is that sibbling headers (like
`hash.hh` the test header vs `hash.hh` the main `libnixutil` header) end
up shadowing each other. This PR doesn't solve that. That is left as
future work for a future PR.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This makes for more useful manual table of contents, that displays the
information at a glance.
The `nix help-stores` command is kept as-is, even though it will show up
in the manual with the same information as these pages due to the way it
is written as a "`--help`-style" command. Deciding what to do with that
command is left for a later PR.
This change also lists all store types at the top of the respective overview page.
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems
- helps navigating the code as it highlights which files are generated
- makes it less error prone when working incrementally
(although this should be just fixed by building out of tree)
This uses `git check-ignore` to determine if files are ignored before
attempting to add them in `putFile`.
We also add a condition to the `fetchFromWorkdir` filter to always add
the `flake.lock` file, even if it's not tracked. This is necessary to
resolve inputs.
This fixes#8854 without `git add --force`.
The problem was that f880469173 forgot
that the `#include <sys/xattr.h>` was guarded by an `#ifdef __linux__`.
However, the build failure was only on FreeBSD --- turns out other
platforms have this header too!
The fix therefore uses a new configure check so we properly clear ACLs
on more platforms.
This allows templates such as `NLOHMANN_DEFINE_TYPE_*` templates and other generators with things like `std::vector<std::optional<T>>`.
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems>
`installcheck` doesn't yet work, but the rest of the build can now
happen mostly inside a separate build directory.
Progress on #9342
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
GitArchiveInputScheme now streams tarballs into a Git repository. This
deduplicates data a lot, e.g. when you're fetching different revisions
of the Nixpkgs repo. It also warns if the tree hash returned by GitHub
doesn't match the tree hash of the imported tarball.
In commit 0d2163c6dc, the progress bar was hidden
in nix repl because of a regression that caused it to interfere with user
input. Several users like(d) seeing the progress bar in the repl during builds.
Only hiding it while waiting for user input gives us the best of both worlds,
so do just that.
Without the change build for `eval.o` fails occasionally as:
$ make src/libexpr/eval.o
GEN Makefile.config
GEN src/libexpr/primops/derivation.nix.gen.hh
GEN src/libexpr/fetchurl.nix.gen.hh
GEN src/libexpr/parser-tab.cc
GEN src/libexpr/lexer-tab.cc
src/libexpr/lexer.l:314: warning, -s option given but default rule can be matched
CXX src/libexpr/eval.o
src/libexpr/eval.cc:519:18: fatal error: flake/call-flake.nix.gen.hh: No such file or directory
519 | #include "flake/call-flake.nix.gen.hh"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make: *** [mk/patterns.mk:3: src/libexpr/eval.o] Error 1
Noticed in https://github.com/NixOS/nixpkgs/pull/269439
This builds on #8817, to add additional UX help for people with existing
muscle memory (or shell history) with --update-input and tries to gently
guide them towards the newly evolved CLI UI.
Co-authored-by: Cole Helbling <cole.e.helbling@outlook.com>
We occasionnally commit to git repositories (like with `nix flake update --commit-lock-file`).
This shells out to `git commit`, which might wait for user input (for a signing key passphrase for instance).
Disable the progress bar while this is running to make sure that the
user can enter it.
* doc: primops: add more info for foldl
From the existing doc it is not obvious whether the first or the
second argument is the accumulator. This is however relevant to
know, as for certain scenarios, this might change the behavior.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
https://github.com/NixOS/nixpkgs/pull/269064 makes rapidcheck be build
as a shared lib, but that broke Nix because the `-lrapidcheck` was
missing. This fixes that (and doesn't break Nix what the library is a
static archive as today).
It is not inherently tied to `LocalStore`, it could probably even go in
`libnixutil`. Functions not attached to `LocalStore` should not be
declared in `local-store.hh`.
I am moving it to facilitate experimenting for #9344. If
canonicalisation should be done client-side in client-side builds, there
wouldn't be a `LocalStore` at all so having to include that header to
get this freestanding function is cumbersome and wrong.
Perhaps canonicalisation should still be done server-side for security
reasons --- I don't mean to make that judgement call now --- but even if
so, this freestanding function still isn't connected to `LocalStore` so
while less urgent it is still better to move out of this header.
This avoids repeated copying of the same source tree between Nix
invocations. It requires the accessor to have a "fingerprint" (e.g. a
Git revision) that uniquely determines its contents.
getFlake currently calls lstat (via isLink via canonPath) before it
performs the sanity check that a flake.nix exists in the first place.
This commit moves the check to before path canonicalization, so that
failed symlink check operations don't throw before the check does.
Fixes:
warning: destructor called on non-final 'nix::ParseUnquoted' that has virtual functions but non-virtual destructor [-Wdelete-non-abstract-non-virtual-dtor]
**`Value` and `const`**
These two deserve some explanation. We'll get to lists later.
Values can normally be thought of as immutable, except they are
are also the vehicle for call by need, which must be implemented
using mutation.
This circumstance makes a `const Value` a rather useless thing:
- If it's a thunk, you can't evaluate it, except by copying, but
that would not be call by need.
- If it's not a thunk, you know the type, so the method that
acquired it for you should have returned something more specific,
such as a `const Bindings &` (which actually does make sense
because that's an immutable span of pointers to mutable `Value`s.
- If you don't care about the type yet, you might establish the
convention that `const Value` means `deepSeq`-ed data, but
this is hardly useful and not actually as safe as you would
supposedly want to trust it to be - just convention.
**Lists**
`std::span` is a tuple of pointer and size - just what we need.
We don't return them as `const Value`, because considering the
first bullet point we discussed before, we'd have to force all
the list values, which isn't what we want.
So what we end up with is a nice representation of a list in
weak head normal form: the spine is immutable, but the
items may need some evaluation later.
Closes#9343
See that issue for motivation.
Installing these is disabled by default, but we enable it (and the
additional output we want isntall these too so as not to clutter the
existing ones) to use in cross builds and dev shells.
Try to stay away from stack overflows.
These small vectors use stack space. Most instances will not need
to allocate because in general most things are small, and large
things are worth heap allocating.
16 * 3 * word = 384 bytes is still quite a bit, but these functions
tend not to be part of deep recursions.
This makes stack usage significantly more compact, allowing larger
amounts of data to be processed on the same stack.
PrimOp functions with more than 8 positional (curried) arguments
should use an attrset instead.
VLAs are a dangerous feature, and their usage triggers an undefined
behavior since theire size can be zero in some cases.
So replace them with `boost::small_vector`s which fit the same goal but
are safer.
It's also incidentally consistently 1% faster on the benchmarks.
SHELL was inherited from the system environment. This resulted in a new
shell being started, but with SHELL still referring to the system shell
and not the one used by nix-develop.
Applications like make, use SHELL to run commands, which meant that
top-level commands are run inside the nix-develop-shell, but
sub-commands are ran inside the system shell.
This setenv forces SHELL to always be set to the shell used by
nix-develop.
This is the core functionality but just unit-tested and not yet made
part of the store layer. This is because there is some tech debt around
(a) repeated boilerplate hashing objects (b) better integration of the
new `SourceAccessor` type that needs to be cleaned up first.
Part of RFC 133
Co-Authored-By: Matthew Bauer <mjbauer95@gmail.com>
Co-Authored-By: Carlo Nucera <carlo.nucera@protonmail.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Florian Klink <flokli@flokli.de>
As discussed in our last meeting, we need a bit more time, but we are
"time boxing" the work left to do to ensure there is not unbounded
delay.
Rather than putting it back underneath `flakes`, though, put it
underneath its own `fetch-tree` experimental feature (which `flakes`
includes/implies). This signals our commitment to the plan to stabilize
it first without waiting to go through the rest of Flakes, and also will
give users a "release candidate" when we get closer to stabilization.
This reverts commit 4112dd1fc9.
These usages of the working directory are perhaps unlikely to
interact with shebangs, but the code is more consistent this way,
and we're less likely to miss usages that do interact.
Enables shebang usage of nix shell. All arguments with `#! nix` get
added to the nix invocation. This implementation does NOT set any
additional arguments other than placing the script path itself as the
first argument such that the interpreter can utilize it.
Example below:
```
#!/usr/bin/env nix
#! nix shell --quiet
#! nix nixpkgs#bash
#! nix nixpkgs#shellcheck
#! nix nixpkgs#hello
#! nix --ignore-environment --command bash
# shellcheck shell=bash
set -eu
shellcheck "$0" || exit 1
function main {
hello
echo 0:"$0" 1:"$1" 2:"$2"
}
"$@"
```
fix: include programName usage
EDIT: For posterity I've changed shellwords to shellwords2 in order
not to interfere with other changes during a rebase.
shellwords2 is removed in a later commit. -- roberth
Users may select specific outputs using the ^output syntax or selecting
any output using ^*.
URL parsing currently doesn't support these kinds of output references:
parsing will fail.
Currently `queryRegex` was reused for URL fragments, which didn't
include support for ^. Now queryRegex has been split from fragmentRegex,
where only the fragmentRegex supports ^.
* Fix boost::bad_format_string exception in builtins.addErrorContext
The message passed to addTrace was incorrectly being used as a format
string and this this would cause an exception when the string contained
a '%', which can be hit in places where arbitrary file paths are
interpolated.
* add test
Before it returned a list of JSON objects with store object information,
including the path in each object. Now, it maps the paths to JSON
objects with the metadata sans path.
This matches how `nix derivation show` works.
Quite hillariously, none of our existing functional tests caught this
change to `path-info --json` though they did use it. So just new
functional tests need to be added.
`Store::pathInfoToJSON` was a rather baroque functions, being full of
parameters to support both parsed derivations and `nix path-info`. The
common core of each, a simple `dValidPathInfo::toJSON` function, is
factored out, but the rest of the logic is just duplicated and then
specialized to its use-case (at which point it is no longer that
duplicated).
This keeps the human oriented CLI logic (which is currently unstable)
and the core domain logic (export reference graphs with structured
attrs, which is stable), separate, which I think is better.
Spent a while debugging why `nix-copy-closure` wasn't working anymore
and it was my shell RC printing something I added for debug.
Hopefully this can save someone else some time.
All OS and IO operations should be moved out, leaving only some misc
portable pure functions.
This is useful to avoid copious CPP when doing things like Windows and
Emscripten ports.
Newly exposed functions to break cycles:
- `restoreSignals`
- `updateWindowSize`
The new `MemorySourceAccessor` rather than being a slightly lossy flat
map is a complete in-memory model of file system objects.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
This adds publicKeys as an optional fetcher input attribute to flakes
and builtins.fetchGit to provide a nix interface for the json-encoded
`publicKeys` attribute of the git fetcher.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This implements the git input attributes `verifyCommit`, `keytype`,
`publicKey` and `publicKeys` as experimental feature
`verified-fetches`. `publicKeys` should be a json string.
This representation was chosen because all attributes must be of type bool,
int or string so they can be included in flake uris (see definition of
fetchers::Attr).
When doing local builds, we get phase reporting lines in the log file,
they look like '@nix {"action":"setPhase","phase":"unpackPhase"}'.
With the ssh-ng protocol, we do have access to these messages, but since we
are only including messages of type resBuildLogLine in the logs, the phase
information does not end up in the log file.
The phase reporting could probably be improved altoghether (it looks like it
is kind of accidental that these JSON messages for phase reporting show up
but others don't, just because they are actually emitted by nixpkgs' stdenv),
but as a first step I propose to make ssh-ng behave in the same way as local builds do.
Deduplicating code moreover enforcing the pattern means:
- It is easier to write new characterization tests because less boilerplate
- It is harder to mess up new tests because there are fewer places to
make mistakes.
Co-authored-by: Jacek Galowicz <jacek@galowicz.de>
Noticed because of a warning during an rpm build:
*** WARNING: ./usr/src/debug/nix-2.18.1-1.fc40.x86_64/src/nix-copy-closure/nix-copy-closure.cc is executable but has no shebang, removing executable bit
*** WARNING: ./usr/src/debug/nix-2.18.1-1.fc40.x86_64/src/nix-channel/nix-channel.cc is executable but has no shebang, removing executable bit
I wouldn't call it *good* yet, but this will do for now.
- `RetrieveRegularNARSink` renamed to `RegularFileSink` and moved
accordingly because it actually has nothing to do with NARs in
particular.
- its `fd` field is also marked private
- `copyRecursive` introduced to dump a `SourceAccessor` into a
`ParseSink`.
- `NullParseSink` made so `ParseSink` no longer has sketchy default
methods.
This was done while updating #8918 to work with the new
`SourceAccessor`.
Adding the inputPath as a positional feature uncovered this bug.
As positional argument forms were discarded from the `expectedArgs`
list, their closures were not. When the `.completer` closure was then
called, part of the surrounding object did not exist anymore.
This didn't cause an issue before, but with the new call to
`getEvalState()` in the "inputs" completer in nix/flake.cc, a segfault
was triggered reproducibly on invalid memory access to the `this`
pointer, which was always 0.
The solution of splicing the argument forms into a new list to extend
their lifetime is a bit of a hack, but I was unable to get the "nicer"
iterator-based solution to work.
Instead of making a complete copy of the repo, fetching the
submodules, and writing the result to the store (which is all
superexpensive), we now fetch the submodules recursively using the Git
fetcher, and return a union accessor that "mounts" the accessors for
the submodules on top of the root accessor.
We now have `schemeName` and `allowedAttrs` functions for this purpose.
We look up the schema with the former; we restrict the set of input
attributes with the latter.
The brings a number of advantages, including:
- Easier to update test data if design changes (and I do think our
derivation JSON is not yet complaint with the guidelines).
- Easier to reuse test data in other implementations, inching closer to
compliance tests for Nix *the concept* rather than any one
implementation.
Before the change builder ID exhaustion printed the following message:
[0/1 built] waiting for UID to build '/nix/store/hiy9136x0iyib4ssh3w3r5m8pxjnad50-python3.11-breathe-4.35.0.drv'
After the change it should be:
[0/1 built] waiting for a free build user ID for '/nix/store/hiy9136x0iyib4ssh3w3r5m8pxjnad50-python3.11-breathe-4.35.0.drv'
Committing a lock file using markFileChanged() required the input to
be writable by the caller in the local filesystem (using the path
returned by getSourcePath()). putFile() abstracts over this.
Rather than having a misc tutorial page in the grab-bag "package management" section, this information should just be part of the S3 store docs.
---------
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems>
End goal: make `(mkDerivation x).drvPath` behave like a non-DrvDeep
context.
Problem: users won't be able to recover the DrvDeep behavior when
nixpkgs makes this change.
Solution: add this primop.
The new primop is fairly simple, and is supposed to complement other
existing ones (`builtins.storePath`, `builtins.outputOf`) so there are
simple ways to construct strings with every type of string context
element.
(It allows nothing we couldn't already do with `builtins.getContext` and `builtins.appendContext`, which is also true of those other two primops.)
This was originally in #8595, but then it was proposed to land some doc
changes separately. So now the code changes proper is just moved to
this, and the doc will be done in that.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.nore
github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io
Leading whitespace after `nix-shell` used to produce an empty argument,
while an empty argument at the end of the line was ignored.
Fix the first issue by consuming the initial whitespace before calling
shellwords; fix the second issue by returning immediately if whitespace
is found at the end of the string instead of checking for an empty
string.
Also throw if quotes aren't terminated.
Single quotes are a basic feature of shell syntax that people expect to
work. They are also more convenient for writing literal code expressions
with less escaping.
As I complained in
https://github.com/NixOS/nix/pull/6784#issuecomment-1421777030 (a
comment on the wrong PR, sorry again!), #6693 introduced a second
completions mechanism to fix a bug. Having two completion mechanisms
isn't so nice.
As @thufschmitt also pointed out, it was a bummer to go from `FlakeRef`
to `std::string` when collecting flake refs. Now it is `FlakeRefs`
again.
The underlying issue that sought to work around was that completion of
arguments not at the end can still benefit from the information from
latter arguments.
To fix this better, we rip out that change and simply defer all
completion processing until after all the (regular, already-complete)
arguments have been passed.
In addition, I noticed the original completion logic used some global
variables. I do not like global variables, because even if they save
lines of code, they also obfuscate the architecture of the code.
I got rid of them moved them to a new `RootArgs` class, which now has
`parseCmdline` instead of `Args`. The idea is that we have many argument
parsers from subcommands and what-not, but only one root args that owns
the other per actual parsing invocation. The state that was global is
now part of the root args instead.
This did, admittedly, add a bunch of new code. And I do feel bad about
that. So I went and added a lot of API docs to try to at least make the
current state of things clear to the next person.
--
This is needed for RFC 134 (tracking issue #7868). It was very hard to
modularize `Installable` parsing when there were two completion
arguments. I wouldn't go as far as to say it is *easy* now, but at least
it is less hard (and the completions test finally passed).
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
It does not belong with the data type itself.
This also materializes the fact that `copyPath` does not do any version
negotiation just just hard-codes "16".
The non-standard interface of these serializers makes it harder to test,
but this is fixed in the next commit which then adds those tests.
Worker Protocol:
Note that the worker protocol already had a serialization for
`BuildResult`; this was added in
a4604f1928. It didn't have any versioning
support because at that time reusable seralizers were not away for the protocol
version. It could thus only be used for new messages also introduced in
that commit.
Now that we do support versioning in reusable serializers, we can expand
it to support all known versions and use it in many more places.
The exist test data becomes the version 1.29 tests: note that those
files' contents are unchanged. 1.28 and 1.27 tests are added to cover
the older code-paths.
The keyered build result test only has 1.29 because the keying was also
added in a4604f19284254ac98f19a13ff7c2216de7fe176; the older
serializations are always used unkeyed.
Serve Protocol:
Conversely, no attempt was made to factor out such a serializer for the
serve protocol, so our work there in this commit for that protocol
proceeds from scratch.
It was some ad-hoc functions to account for versions, while the already
factored-out serializer just supported the latest version.
Now, we can fold that version-specific logic into the factored out one,
and so we do.
It is dead code. It was added in
8e0946e8df as part of the repeated /
enforce-determinism feature, but that was removed in
8fdd156a65.
It is not good because it skips many fields. For testing purposes we
will soon want to add a new one that doesn't skip fields, but we want to
make sure making == sensitive to those fields won't change how Nix
works. Proving in this commit that the old version is dead code achieves
that.
