we now keep not a table of all positions, but a table of all origins and
their sizes. position indices are now direct pointers into the virtual
concatenation of all parsed contents. this slightly reduces memory usage
and time spent in the parser, at the cost of not being able to report
positions if the total input size exceeds 4GiB. this limit is not unique
to nix though, rustc and clang also limit their input to 4GiB (although
at least clang refuses to process inputs that are larger, we will not).
this new 4GiB limit probably will not cause any problems for quite a
while, all of nixpkgs together is less than 100MiB in size and already
needs over 700MiB of memory and multiple seconds just to parse. 4GiB
worth of input will easily take multiple minutes and over 30GiB of
memory without even evaluating anything. if problems *do* arise we can
probably recover the old table-based system by adding some tracking to
Pos::Origin (or increasing the size of PosIdx outright), but for time
being this looks like more complexity than it's worth.
since we now need to read the entire input again to determine the
line/column of a position we'll make unsafeGetAttrPos slightly lazy:
mostly the set it returns is only used to determine the file of origin
of an attribute, not its exact location. the thunks do not add
measurable runtime overhead.
notably this change is necessary to allow changing the parser since
apparently nothing supports nix's very idiosyncratic line ending choice
of "anything goes", making it very hard to calculate line/column
positions in the parser (while byte offsets are very easy).
this needs a string comparison because there seems to be no other way to
get that information out of bison. usually the location info is going to
be correct (pointing at a bad token), but since EOF isn't a token as
such it'll be wrong in that this case.
this hasn't shown up much so far because a single line ending *is* a
token, so any file formatted in the usual manner (ie, ending in a line
ending) would have its EOF position reported correctly.
the parser treats a plain \r as a newline, error reports do not. this
can lead to interesting divergences if anything makes use of this
feature, with error reports pointing to wrong locations in the input (or
even outside the input altogether).
previously we reported the error at the beginning of the binding
block (for plain inherits) or the beginning of the attr list (for
inherit-from), effectively hiding where exactly the error happened.
this also carries over to runtime positions of attributes in sets as
reported by unsafeGetAttrPos. we're not worried about this changing
observable eval behavior because it *is* marked unsafe, and the new
behavior is much more useful.
we already normalize attr order to lexicographic, doing the same for
formals makes sense. doubly so because the order of formals would
otherwise depend on the context of the expression, which is not quite as
useful as one might expect.
the parser modifies its inputs, which means that sharing them between
the error context reporting system and the parser itself can confuse the
reporting system. usually this led to early truncation of error context
reports which, while not dangerous, can be quite confusing.
When reviewing old PRs, I found that #9997 adds some code to ensure one
particular assert is always present. But, removing asserts isn't
something we do in our own release builds either in the flake here or in
nixpkgs, and is plainly a bad idea that increases support burden,
especially if other distros make bad choices of build flags in their Nix
packaging.
For context, the assert macro in the C standard is defined to do nothing
if NDEBUG is set.
There is no way in our build system to set -DNDEBUG without manually
adding it to CFLAGS, so this is simply a configuration we do not use.
Let's ban it at compile time.
I put this preprocessor directive in src/libutil.cc because it is not
obvious where else to put it, and it seems like the most logical file
since you are not getting a usable nix without it.
Directly fail if a flakeref points to something that isn't a directory
instead of falling back to the logic of trying to look up the hierarchy
to find a valid flake root.
Fix https://github.com/NixOS/nix/issues/9868
Part of RFC 133
Extracted from our old IPFS branches.
Co-Authored-By: Matthew Bauer <mjbauer95@gmail.com>
Co-Authored-By: Carlo Nucera <carlo.nucera@protonmail.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Florian Klink <flokli@flokli.de>
desugaring inherit-from to syntactic duplication of the source expr also
duplicates side effects of the source expr (such as trace calls) and
expensive computations (such as derivationStrict).
When a file conflict arises during a package install a suggestion is
made to remove the old entry. This was previously done using the
installable URLs of the old entry. These URLs are quite verbose and
often do not equal the URL of the existing entry.
This change uses the recently introduced profile entry name for the
suggestion, resulting in a simpler output.
The improvement is easily seen in the change to the functional test.
- `nix store add` supports text hashing
With functional test ensuring it matches `builtins.toFile`.
- Factored-out flags for both commands
- Move all common reusable flags to `libcmd`
- They are not part of the *definition* of the CLI infra, just a usag
of it.
- The `libstore` flag couldn't go in `args.hh` in libutil anyways,
would be awkward for it to live alone
- Shuffle around `Cmd*` hierarchy so flags for deprecated commands don't
end up on the new ones
It's better to just check whether the input has all the attributes
needed to consider itself locked (e.g. whether a Git input has an
'rev' attribute).
Also, the 'locked' field was actually incorrect for Git inputs: it
would be set to true even for dirty worktrees. As a result, we got
away with using fetchTree() internally even though fetchTree()
requires a locked input in pure mode. In particular, this allowed
'--override-input' to work by accident.
The fix is to pass a set of "overrides" to call-flake.nix for all the
unlocked inputs (i.e. the top-level flake and any --override-inputs).
This fixes warnings like
warning: Ignoring setting 'auto-allocate-uids' because experimental feature 'auto-allocate-uids' is not enabled
warning: Ignoring setting 'impure-env' because experimental feature 'configurable-impure-env' is not enabled
when using the daemon and the user didn't actually set those settings.
Note: this also hides those settings from `nix config show`, but that
seems a good thing.
`canonPath` and `absPath` work on native paths, and so should switch
between supporting Unix paths and Windows paths accordingly.
The templating is because `CanonPath`, which shares the implementation,
should always be Unix style. It is the pure "nix-native" path type for
virtual file operations --- it is part of Nix's "business logic", and
should not vary with the host OS accordingly.
The core `CanonPath` constructors were using `absPath`, but `absPath` in
some situations does IO which is not appropriate. It turns out that
these constructors avoided those situations, and thus were pure, but it
was far from obvious this was the case.
To remedy the situation, abstract the core algorithm from `canonPath` to
use separately in `CanonPath` without any IO. No we know by-construction
that those constructors are pure.
That leaves `CanonPath::fromCWD` as the only operation which uses IO /
is impure. Add docs on it, and `CanonPath` as a whole, explaining the
situation.
This is also necessary to support Windows paths on windows without
messing up `CanonPath`. But, I think it is good even without that.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Commit 83c067c0fa changed `builtins.pathExists`
to resolve symlinks before checking for existence. Consequently, if the path
refers to a symlink itself, existence of the target of the symlink (instead of
the symlink itself) was checked. Restore the previous behavior by skipping
symlink resolution in the last component.
No outward facing behavior is changed.
Older methods with same names that operate on on method + algo pair (for
old-style `<method>:algo`) are renamed to `*WithAlgo`.)
The functions are unit-tested in the same way the names for the hash
algorithms are tested.
for plain inherits this is really just a stylistic choice, but for
inherit-from it actually fixes an exponential size increase problem
during expr printing (as may happen during assertion failure reporting,
on during duplicate attr detection in the parser)
this also has the effect of sorting let bindings lexicographically
rather than by symbol creation order as was previously done, giving a
better canonicalization in the process.
When I started contributing to Nix, I found the mix of definitions and
names in `fmt.hh` to be rather confusing, especially the small
difference between `hintfmt` and `hintformat`. I've renamed many classes
and added documentation to most definitions.
- `formatHelper` is no longer exported.
- `fmt`'s documentation is now with `fmt` rather than (misleadingly)
above `formatHelper`.
- `yellowtxt` is renamed to `Magenta`.
`yellowtxt` wraps its value with `ANSI_WARNING`, but `ANSI_WARNING`
has been equal to `ANSI_MAGENTA` for a long time. Now the name is
updated.
- `normaltxt` is renamed to `Uncolored`.
- `hintfmt` has been merged into `hintformat` as extra constructor
functions.
- `hintformat` has been renamed to `hintfmt`.
- The single-argument `hintformat(std::string)` constructor has been
renamed to a static member `hintformat::interpolate` to avoid pitfalls
with using user-generated strings as format strings.
Pretty-print values in the REPL by printing each item in a list or
attrset on a separate line. When possible, single-item lists and
attrsets are printed on one line, as long as they don't contain a nested
list, attrset, or thunk.
Before:
```
{ attrs = { a = { b = { c = { }; }; }; }; list = [ 1 ]; list' = [ 1 2 3 ]; }
```
After:
```
{
attrs = {
a = {
b = {
c = { };
};
};
};
list = [ 1 ];
list' = [
1
2
3
];
}
```
Some tools which consume the "nix print-dev-env" rc script (such as
"nix-direnv") are sensitive to the use of unbound variables. They use
"set -u".
The "nix print-dev-env" rc script initially unsets "shellHook", then
loads variables from the derivation, and then evaluates "shellHook".
However, most derivations don't have a "shellHook" attribute.
So users get the error "shellHook: unbound variable". This can be
demonstrated with the command:
nix print-dev-env nixpkgs#hello | bash -u
This commit changes the rc script to provide an empty fallback value
for the "shellHook" variable.
Closes: #7951#8253
While preparing PRs like #9753, I've had to change error messages in
dozens of code paths. It would be nice if instead of
EvalError("expected 'boolean' but found '%1%'", showType(v))
we could write
TypeError(v, "boolean")
or similar. Then, changing the error message could be a mechanical
refactor with the compiler pointing out places the constructor needs to
be changed, rather than the error-prone process of grepping through the
codebase. Structured errors would also help prevent the "same" error
from having multiple slightly different messages, and could be a first
step towards error codes / an error index.
This PR reworks the exception infrastructure in `libexpr` to
support exception types with different constructor signatures than
`BaseError`. Actually refactoring the exceptions to use structured data
will come in a future PR (this one is big enough already, as it has to
touch every exception in `libexpr`).
The core design is in `eval-error.hh`. Generally, errors like this:
state.error("'%s' is not a string", getAttrPathStr())
.debugThrow<TypeError>()
are transformed like this:
state.error<TypeError>("'%s' is not a string", getAttrPathStr())
.debugThrow()
The type annotation has moved from `ErrorBuilder::debugThrow` to
`EvalState::error`.
As discussed in the maintainer meeting on 2024-01-29.
Mainly this is to avoid a situation where the name is parsed and
treated as a file name, mostly to protect users.
.-* and ..-* are also considered invalid because they might strip
on that separator to remove versions. Doesn't really work, but that's
what we decided, and I won't argue with it, because .-* probably
doesn't seem to have a real world application anyway.
We do still permit a 1-character name that's just "-", which still
poses a similar risk in such a situation. We can't start disallowing
trailing -, because a non-zero number of users will need it and we've
seen how annoying and painful such a change is.
What matters most is preventing a situation where . or .. can be
injected, and to just get this done.
Use `diff --color=always` to print colored output for language test
failures. I've also flipped the arguments so that expected lines missing
from the actual output will be marked with a red `-` and additional
lines found in the actual output will be marked with a green `+`.
Previously it was the other way around, which was very confusing.
This extends the `error: cannot coerce a TYPE to a string` message
to print the value that could not be coerced. This helps with debugging
by making it easier to track down where the value is being produced
from, especially in errors with deep or unhelpful stack traces.
More invariants are enforced in the type, and less state needs to be
stored in the main sink itself. The method here is roughly that known as
"session types".
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Low-hanging fruit in the spirit of #9753 and #9754 (means 9999years did
all the hard work already).
This basically prints out what was attempted to be called as function,
i.e.
map (import <nixpkgs> {}) [ 1 2 3 ]
now gives the following error message:
error:
… while calling the 'map' builtin
at «string»:1:1:
1| map (import <nixpkgs> {}) [ 1 2 3 ]
| ^
… while evaluating the first argument passed to builtins.map
error: expected a function but found a set: { _type = "pkgs"; AAAAAASomeThingsFailToEvaluate = «thunk»; AMB-plugins = «thunk»; ArchiSteamFarm = «thunk»; BeatSaberModManager = «thunk»; CHOWTapeModel = «thunk»; ChowCentaur = «thunk»; ChowKick = «thunk»; ChowPhaser = «thunk»; CoinMP = «thunk»; «18783 attributes elided»}
Do this if we want to do `--hash-algo` everywhere, and not `--algo` for
hash commands.
The new `nix hash convert` is updated. Deprecated new CLI commands are
left as-is (`nix hash path` needs to be redone and is also left as-is).
Add several tests for git fetching:
- shallow-cache-separation: can fetch the same repo shallowly and non-shallowly
- shallow-ignore-ref: ensure that ref gets ignored when shallow=true is set
- ssh-shallow: can fetch a git repo via ssh using shallow=1
Otherwise we get a stray `tests/functional/result`, which can cause
spurious failures later.
(I got a failure because the test temp dir effecting the store dir
changed. This caused a test later because Nix didn't want to remove the
old `result` because it wasn't pointing inside the new Nix store.)
Most of this is a `catch SysError` -> `catch SystemError` sed. This
is a rather pure-churn change I would like to get out of the way. **The
intersting part is `src/libutil/error.hh`.**
On Unix, we will only throw the `SysError` concrete class, which has
the same constructors that `SystemError` used to have.
On Windows, we will throw `WinError` *and* `SysError`. `WinError`
(which will be created in a later PR), will use a `DWORD` instead of
`int` error value, and `GetLastError()`, which is the Windows equivalent
of the `errno` machinery. Windows will *also* use `SysError` because
Window's "libc" (MSVCRT) implements the POSIX interface, and we use it
too.
As the docs describe, while we *throw* one of the 3 choices above (2
concrete classes or the alias), we should always *catch* `SystemError`.
This ensures no matter how the implementation changes for Windows (e.g.
between `SysError` and `WinError`) the catching logic stays the same
and stays correct.
Co-Authored-By volth <volth@volth.com>
Co-Authored-By Eugene Butler <eugene@eugene4.com>
Also fingerprint and some preparatory improvements.
Testing is still not up to scratch because lots of logic is duplicated
between the workdir and commit cases.
Enabled for fetchGit, which historically had this behavior,
among other behaviors we do not want in fetchGit.
fetchTree disables this parameter by default. It can choose the
simpler behavior, as it is still experimental.
I am not confident that the filtering implementation is future
proof. It should reuse a source filtering wrapper, which I believe
Eelco has already written, but not merged yet.
The Nix team has requested that this output format remain unchanged.
I've added a warning to the man page explaining that `nix-instantiate
--eval` output will not parse correctly in many situations.
Previously, there were two mostly-identical value printers -- one in
`libexpr/eval.cc` (which didn't force values) and one in
`libcmd/repl.cc` (which did force values and also printed ANSI color
codes).
This PR unifies both of these printers into `print.cc` and provides a
`PrintOptions` struct for controlling the output, which allows for
toggling whether values are forced, whether repeated values are tracked,
and whether ANSI color codes are displayed.
Additionally, `PrintOptions` allows tuning the maximum number of
attributes, list items, and bytes in a string that will be displayed;
this makes it ideal for contexts where printing too much output (e.g.
all of Nixpkgs) is distracting. (As requested by @roberth in
https://github.com/NixOS/nix/pull/9554#issuecomment-1845095735)
Please read the tests for example output.
Future work:
- It would be nice to provide this function as a builtin, perhaps
`builtins.toStringDebug` -- a printing function that never fails would
be useful when debugging Nix code.
- It would be nice to support customizing `PrintOptions` members on the
command line, e.g. `--option to-string-max-attrs 1000`.
solves #9388
This utilizes nixos vm tests to allow:
- writing tests for fetchTree and fetchGit involving actual networking.
- writing small independent test cases by automating local and remote repository setup per test case.
This adds:
- a gitea module setting up a gitea server
- a setup module that simplifies writing test cases by automating the repo setup.
- a simple git http test case
Other improvements:
For all nixos tests, add capability of overriding the nix version to test against.
This should make it easier to prevent regressions. If a new test is added it can simply be ran against any older nix version without having to backport the test.
For example, for running the container tests against nix 2.12.0:
`nix build "$(nix eval --raw .#hydraJobs.tests.containers --impure --apply 't: (t.forNix "2.12.0").drvPath')^*" -L`
This fixes a segfault on infinite function call recursion (rather than
infinite thunk recursion) by tracking the function call depth in
`EvalState`.
Additionally, to avoid printing extremely long stack traces, stack
frames are now deduplicated, with a `(19997 duplicate traces omitted)`
message. This should only really be triggered in infinite recursion
scenarios.
Before:
$ nix-instantiate --eval --expr '(x: x x) (x: x x)'
Segmentation fault: 11
After:
$ nix-instantiate --eval --expr '(x: x x) (x: x x)'
error: stack overflow
at «string»:1:14:
1| (x: x x) (x: x x)
| ^
$ nix-instantiate --eval --expr '(x: x x) (x: x x)' --show-trace
error:
… from call site
at «string»:1:1:
1| (x: x x) (x: x x)
| ^
… while calling anonymous lambda
at «string»:1:2:
1| (x: x x) (x: x x)
| ^
… from call site
at «string»:1:5:
1| (x: x x) (x: x x)
| ^
… while calling anonymous lambda
at «string»:1:11:
1| (x: x x) (x: x x)
| ^
… from call site
at «string»:1:14:
1| (x: x x) (x: x x)
| ^
(19997 duplicate traces omitted)
error: stack overflow
at «string»:1:14:
1| (x: x x) (x: x x)
| ^
Previously, IFDs would be built within the eval store, even though one
is typically using `--eval-store` precisely to *avoid* local builds.
Because the resulting Nix expression must be copied back to the eval
store in order to be imported, this requires the eval store to trust
the build store's signatures.
The profile manifest is now an object keyed on the name returned by
getNameFromURL() at installation time, instead of an array. This
ensures that the names of profile elements don't change when other
elements are added/removed.
On macOS in the `nix develop` shell, `make
tests/functional/logging.sh.test` errors:
++(logging.sh:18) mktemp
+(logging.sh:18) builder=/var/folders/z5/fclwwdms3r1gq4k4p3pkvvc00000gn/T/tmp.StuabKUhMh
+(logging.sh:19) echo -e '#!/bin/sh\nmkdir $out'
+++(logging.sh:22) mktemp -d
++(logging.sh:22) nix-build -E 'with import ./config.nix; mkDerivation { name = "fnord"; builder = /var/folders/z5/fclwwdms3r1gq4k4p3pkvvc00000gn/T/tmp.StuabKUhMh; }' --out-link /var/folders/z5/fclwwdms3r1gq4k4p3pkvvc00000gn/T/tmp.oaKcy0NXqC/result
error:
… while calling the 'derivationStrict' builtin
at <nix/derivation-internal.nix>:9:12:
8|
9| strict = derivationStrict drvAttrs;
| ^
10|
… while evaluating derivation 'fnord'
whose name attribute is located at «string»:1:42
… while evaluating attribute 'args' of derivation 'fnord'
at /Users/wiggles/nix/tests/functional/config.nix:23:7:
22| builder = shell;
23| args = ["-e" args.builder or (builtins.toFile "builder-${args.name}.sh" ''
| ^
24| if [ -e "$NIX_ATTRS_SH_FILE" ]; then source $NIX_ATTRS_SH_FILE; fi;
error: path '/var' is a symlink
+(logging.sh:22) outp=
++(logging.sh:22) onError
++(/Users/wiggles/nix/tests/functional/common/vars-and-functions.sh:237) set +x
logging.sh: test failed at:
main in logging.sh:22
This is because `mktemp` returns a path like
`/var/folders/z5/fclwwdms3r1gq4k4p3pkvvc00000gn/T/tmp.qDY24l6bIM`,
where `/var` is a symlink to `/private/var`.
Then, we attempt to use that path as a `builder`, which errors because
symlinks are impure or whatever.
Anyways, we can fix this by using `realpath "$(mktemp)"` instead of
`mktemp` directly.
NB: This error doesn't seem to happen when I run the tests through `nix
flake check`. I'm not sure if Nix does something to `TMP` in that case.
As part of the CLI stabilization effort, the last remaining checkbox (at
the moment) for `nix daemon` is that it "needs testing". This implements
the proposal of using `nix daemon` in place of `nix-daemon` in the test
suite.
`nix flake check` had these warnings:
trace: warning: Module argument `nodes.client.config` is deprecated. Use `nodes.client` instead.
trace: warning: Module argument `nodes.client.config` is deprecated. Use `nodes.client` instead.
trace: warning: The option `services.openssh.permitRootLogin' defined in `/nix/store/3m3hfpmbjdf4w39qfjami7ljhvhczay1-source/tests/nixos/nix-copy.nix' has been renamed to `services.openssh.settings.PermitRootLogin'.
trace: warning: Module argument `nodes.http_dns.config` is deprecated. Use `nodes.http_dns` instead.
trace: warning: Module argument `nodes.github.config` is deprecated. Use `nodes.github` instead.
trace: warning: Module argument `nodes.sourcehut.config` is deprecated. Use `nodes.sourcehut` instead.
This keeps hint messages, source location information, and source code
snippets grouped together, while making stack traces shorter (so that
more stack frames can be viewed on the same terminal).
Before:
error:
… while evaluating the attribute 'body'
at /Users/wiggles/nix/tests/functional/lang/eval-fail-assert.nix:4:3:
3|
4| body = x "x";
| ^
5| }
… from call site
at /Users/wiggles/nix/tests/functional/lang/eval-fail-assert.nix:4:10:
3|
4| body = x "x";
| ^
5| }
… while calling 'x'
at /Users/wiggles/nix/tests/functional/lang/eval-fail-assert.nix:2:7:
1| let {
2| x = arg: assert arg == "y"; 123;
| ^
3|
error: assertion '(arg == "y")' failed
at /Users/wiggles/nix/tests/functional/lang/eval-fail-assert.nix:2:12:
1| let {
2| x = arg: assert arg == "y"; 123;
| ^
3|
After:
error:
… while evaluating the attribute 'body'
at /Users/wiggles/nix/tests/functional/lang/eval-fail-assert.nix:4:3:
3|
4| body = x "x";
| ^
5| }
… from call site
at /Users/wiggles/nix/tests/functional/lang/eval-fail-assert.nix:4:10:
3|
4| body = x "x";
| ^
5| }
… while calling 'x'
at /Users/wiggles/nix/tests/functional/lang/eval-fail-assert.nix:2:7:
1| let {
2| x = arg: assert arg == "y"; 123;
| ^
3|
error: assertion '(arg == "y")' failed
at /Users/wiggles/nix/tests/functional/lang/eval-fail-assert.nix:2:12:
1| let {
2| x = arg: assert arg == "y"; 123;
| ^
3|
`eval-system` option overrides just the value of `builtins.currentSystem`.
This is more useful than overriding `system` since you can build these
derivations on remote builders which can work on the given system.
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
It works with both `ssh://` and `ssh-ng://` now since #9600 (and
`ssh-ng:// didn't work before that).
Also, by making the two tests share code, we nudge ourselves towards
making sure there is feature parity.
I don't love the way this code looks. There are two larger problems:
- eval, build/scratch, destination stores (#5025) should have different
types to reflect the fact that they are used for different purposes
and those purposes correspond to different operations. It should be
impossible to "use the wrong store" in my cases.
- Since drvs can end up in both the eval and build/scratch store, we
should have some sort of union/layered store (not on the file sytem
level, just conceptual level) that allows accessing both. This would
get rid of the ugly "check both" boilerplate in this PR.
Still, it might be better to land this now / soon after minimal cleanup,
so we have a concrete idea of what problem better abstractions are
supposed to solve.
* Print the value in `error: cannot coerce` messages
This extends the `error: cannot coerce a TYPE to a string` message
to print the value that could not be coerced. This helps with debugging
by making it easier to track down where the value is being produced
from, especially in errors with deep or unhelpful stack traces.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This includes position information in more places, making debugging
easier.
Before:
```
$ nix-instantiate --show-trace --eval tests/functional/lang/eval-fail-using-set-as-attr-name.nix
error:
… while evaluating an attribute name
at «none»:0: (source not available)
error: value is a set while a string was expected
```
After:
```
error:
… while evaluating an attribute name
at /pwd/lang/eval-fail-using-set-as-attr-name.nix:5:10:
4| in
5| attr.${key}
| ^
6|
error: value is a set while a string was expected
```
In the process, partially undo e89b5bd0bf
in that the ancient < 2.4 version is now supported again by the
serializer again. `LegacySSHStore`, instead of also asserting that the
version is at least 4, just checks that `narHash` is set.
This allows us to better test the serializer in isolation for both
versions (< 4 and >= 4).
Today, with the tests inside a `tests` intermingled with the
corresponding library's source code, we have a few problems:
- We have to be careful that wildcards don't end up with tests being
built as part of Nix proper, or test headers being installed as part
of Nix proper.
- Tests in libraries but not executables is not right:
- It means each executable runs the previous unit tests again, because
it needs the libraries.
- It doesn't work right on Windows, which doesn't want you to load a
DLL just for the side global variable . It could be made to work
with the dlopen equivalent, but that's gross!
This reorg solves these problems.
There is a remaining problem which is that sibbling headers (like
`hash.hh` the test header vs `hash.hh` the main `libnixutil` header) end
up shadowing each other. This PR doesn't solve that. That is left as
future work for a future PR.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
`installcheck` doesn't yet work, but the rest of the build can now
happen mostly inside a separate build directory.
Progress on #9342
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
The basic idea here is to separate a few intertwined notions:
1. Not all "run bash tests" are "install tests"
2. Not all "run bash tests" use `tests/functional/init.sh`, or any
pre-test initialization at all.
This will used in the next commit when we have a test that check unit
test golden master data.
Also, move our custom `PS4` from the test to the test runner, as it is
part of how we want to display the tests, not the test themselves.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
As discussed in our last meeting, we need a bit more time, but we are
"time boxing" the work left to do to ensure there is not unbounded
delay.
Rather than putting it back underneath `flakes`, though, put it
underneath its own `fetch-tree` experimental feature (which `flakes`
includes/implies). This signals our commitment to the plan to stabilize
it first without waiting to go through the rest of Flakes, and also will
give users a "release candidate" when we get closer to stabilization.
This reverts commit 4112dd1fc9.
Enables shebang usage of nix shell. All arguments with `#! nix` get
added to the nix invocation. This implementation does NOT set any
additional arguments other than placing the script path itself as the
first argument such that the interpreter can utilize it.
Example below:
```
#!/usr/bin/env nix
#! nix shell --quiet
#! nix nixpkgs#bash
#! nix nixpkgs#shellcheck
#! nix nixpkgs#hello
#! nix --ignore-environment --command bash
# shellcheck shell=bash
set -eu
shellcheck "$0" || exit 1
function main {
hello
echo 0:"$0" 1:"$1" 2:"$2"
}
"$@"
```
fix: include programName usage
EDIT: For posterity I've changed shellwords to shellwords2 in order
not to interfere with other changes during a rebase.
shellwords2 is removed in a later commit. -- roberth
Users may select specific outputs using the ^output syntax or selecting
any output using ^*.
URL parsing currently doesn't support these kinds of output references:
parsing will fail.
Currently `queryRegex` was reused for URL fragments, which didn't
include support for ^. Now queryRegex has been split from fragmentRegex,
where only the fragmentRegex supports ^.
* Fix boost::bad_format_string exception in builtins.addErrorContext
The message passed to addTrace was incorrectly being used as a format
string and this this would cause an exception when the string contained
a '%', which can be hit in places where arbitrary file paths are
interpolated.
* add test
Before it returned a list of JSON objects with store object information,
including the path in each object. Now, it maps the paths to JSON
objects with the metadata sans path.
This matches how `nix derivation show` works.
Quite hillariously, none of our existing functional tests caught this
change to `path-info --json` though they did use it. So just new
functional tests need to be added.
This adds simple tests of the commit signature verification mechanism of
fetchGit and its flake input wrapper.
OpenSSH is added to the build dependencies since it's needed to create
a key when testing the functionality. It is neither a built- nor a
runtime dependency.
When doing local builds, we get phase reporting lines in the log file,
they look like '@nix {"action":"setPhase","phase":"unpackPhase"}'.
With the ssh-ng protocol, we do have access to these messages, but since we
are only including messages of type resBuildLogLine in the logs, the phase
information does not end up in the log file.
The phase reporting could probably be improved altoghether (it looks like it
is kind of accidental that these JSON messages for phase reporting show up
but others don't, just because they are actually emitted by nixpkgs' stdenv),
but as a first step I propose to make ssh-ng behave in the same way as local builds do.
Adding the inputPath as a positional feature uncovered this bug.
As positional argument forms were discarded from the `expectedArgs`
list, their closures were not. When the `.completer` closure was then
called, part of the surrounding object did not exist anymore.
This didn't cause an issue before, but with the new call to
`getEvalState()` in the "inputs" completer in nix/flake.cc, a segfault
was triggered reproducibly on invalid memory access to the `this`
pointer, which was always 0.
The solution of splicing the argument forms into a new list to extend
their lifetime is a bit of a hack, but I was unable to get the "nicer"
iterator-based solution to work.
Instead of making a complete copy of the repo, fetching the
submodules, and writing the result to the store (which is all
superexpensive), we now fetch the submodules recursively using the Git
fetcher, and return a union accessor that "mounts" the accessors for
the submodules on top of the root accessor.
End goal: make `(mkDerivation x).drvPath` behave like a non-DrvDeep
context.
Problem: users won't be able to recover the DrvDeep behavior when
nixpkgs makes this change.
Solution: add this primop.
The new primop is fairly simple, and is supposed to complement other
existing ones (`builtins.storePath`, `builtins.outputOf`) so there are
simple ways to construct strings with every type of string context
element.
(It allows nothing we couldn't already do with `builtins.getContext` and `builtins.appendContext`, which is also true of those other two primops.)
This was originally in #8595, but then it was proposed to land some doc
changes separately. So now the code changes proper is just moved to
this, and the doc will be done in that.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.nore
github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io
- Remove some stray saved error messages that didn't correspond to any
test, because they were renamed in
d11faa01b5.
- Need `--eval` in test failure test in order to get in "read-only" mode
where we don't try to write to the store. (The other tests already do
this.)
- Need `--strict` so top-level attribute sets are still forced, like
they are without `--eval`.
Two changes:
* The (probably unintentional) hack to handle paths as tarballs has
been removed. This is almost certainly not what users expect and is
inconsistent with flakeref handling everywhere else.
* The hack to support scp-style Git URLs has been moved to the Git
fetcher, so it's now supported not just by fetchTree but by flake
inputs.
Add a new experimental `impure-env` setting that is a key-value list of
environment variables to inject into FOD derivations that specify the
corresponding `impureEnvVars`.
This allows clients to make use of this feature (without having to change the
environment of the daemon itself) and might eventually deprecate the current
behaviour (pick whatever is in the environment of the daemon) as it's more
principled and might prevent information leakage.
Additionally this skipping of the building is reimplemented to be a bit
more robust and use the same idioms as the functionality for skipping
the tests. In particular, it will now work even if the source files
exist, so we can do this during development too.
I think the our `flake.nix` is currently too large and too scary looking.
I think this matters --- if Nix cannot dog-food itself in a way that is
elegant, why should other people have confidence that their own code can
be elegant and easy to maintain?
We could do this at many points in time, but I think around now, when we
are thinking about stabilizing parts of Flakes, is an especially good
time.
This is a first step to make the `flake.nix` smaller, and make
individual components responsible for their own packaging. I hope we can
do this many more follow-ups like it, until the top-level `flake.nix` is
very small and just coordinates between other things.
I think it is bad for these reasons when `tests/` contains a mix of
functional and integration tests
- Concepts is harder to understand, the documentation makes a good
unit vs functional vs integration distinction, but when the
integration tests are just two subdirs within `tests/` this is not
clear.
- Source filtering in the `flake.nix` is more complex. We need to
filter out some of the dirs from `tests/`, rather than simply pick
the dirs we want and take all of them. This is a good sign the
structure of what we are trying to do is not matching the structure
of the files.
With this change we have a clean:
```shell-session
$ git show 'HEAD:tests'
tree HEAD:tests
functional/
installer/
nixos/
```
A couple of tests require building some libraries that depend on Nix,
and assume it to be built locally.
Don't run these if we only want to run the install tests.
This prevents the CI from rebuilding several times Nix (like in
https://github.com/NixOS/nix/actions/runs/6404422275/job/17384964033#step:6:6412), thus removing a fair amount of build time.
This reverts commit 5e3986f59c. This
un-implements RFC 92 but fixes the critical bug #9052 which many people
are hitting. This is a decent stop-gap until a minimal reproduction of
that bug is found and a proper fix can be made.
Mostly fixed#9052, but I would like to leave that issue open until we
have a regression test, so I can then properly fix the bug (unbreaking
RFC 92) later.
In #4770 I implemented proper `nix-shell(1)` support for derivations
using `__structuredAttrs = true;`. Back then we decided to introduce two
new environment variables, `NIX_ATTRS_SH_FILE` for `.attrs.sh` and
`NIX_ATTRS_JSON_FILE` for `.attrs.json`. This was to avoid having to
copy these files to `$NIX_BUILD_TOP` in a `nix-shell(1)` session which
effectively meant copying these files to the project dir without
cleaning up afterwords[1].
On last NixCon I resumed hacking on `__structuredAttrs = true;` by
default for `nixpkgs` with a few other folks and getting back to it,
I identified a few problems with the how it's used in `nixpkgs`:
* A lot of builders in `nixpkgs` don't care about the env vars and
assume that `.attrs.sh` and `.attrs.json` are in `$NIX_BUILD_TOP`.
The sole reason why this works is that `nix-shell(1)` sources
the contents of `.attrs.sh` and then sources `$stdenv/setup` if it
exists. This may not be pretty, but it mostly works. One notable
difference when using nixpkgs' stdenv as of now is however that
`$__structuredAttrs` is set to `1` on regular builds, but set to
an empty string in a shell session.
Also, `.attrs.json` cannot be used in shell sessions because
it can only be accessed by `$NIX_ATTRS_JSON_FILE` and not by
`$NIX_BUILD_TOP/.attrs.json`.
I considered changing Nix to be compatible with what nixpkgs
effectively does, but then we'd have to either move $NIX_BUILD_TOP for
shell sessions to a temporary location (and thus breaking a lot of
assumptions) or we'd reintroduce all the problems we solved back then
by using these two env vars.
This is partly because I didn't document these variables back
then (mea culpa), so I decided to drop all mentions of
`.attrs.{json,sh}` in the manual and only refer to `$NIX_ATTRS_SH_FILE`
and `$NIX_ATTRS_JSON_FILE`. The same applies to all our integration tests.
Theoretically we could deprecated using `"$NIX_BUILD_TOP"/.attrs.sh` in
the future now.
* `nix develop` and `nix print-dev-env` don't support this environment
variable at all even though they're supposed to be part of the replacement
for `nix-shell` - for the drv debugging part to be precise.
This isn't a big deal for the vast majority of derivations, i.e.
derivations relying on nixpkgs' `stdenv` wiring things together
properly. This is because `nix develop` effectively "clones" the
derivation and replaces the builder with a script that dumps all of
the environment, shell variables, functions etc, so the state of
structured attrs being "sourced" is transmitted into the dev shell and
most of the time you don't need to worry about `.attrs.sh` not
existing because the shell is correctly configured and the
if [ -e .attrs.sh ]; then source .attrs.sh; fi
is simply omitted.
However, this will break when having a derivation that reads e.g. from
`.attrs.json` like
with import <nixpkgs> {};
runCommand "foo" { __structuredAttrs = true; foo.bar = 23; } ''
cat $NIX_ATTRS_JSON_FILE # doesn't work because it points to /build/.attrs.json
''
To work around this I employed a similar approach as it exists for
`nix-shell`: the `NIX_ATTRS_{JSON,SH}_FILE` vars are replaced with
temporary locations.
The contents of `.attrs.sh` and `.attrs.json` are now written into the
JSON by `get-env.sh`, the builder that `nix develop` injects into the
derivation it's debugging. So finally the exact file contents are
present and exported by `nix develop`.
I also made `.attrs.json` a JSON string in the JSON printed by
`get-env.sh` on purpose because then it's not necessary to serialize
the object structure again. `nix develop` only needs the JSON
as string because it's only written into the temporary file.
I'm not entirely sure if it makes sense to also use a temporary
location for `nix print-dev-env` (rather than just skipping the
rewrite in there), but this would probably break certain cases where
it's relied upon `$NIX_ATTRS_SH_FILE` to exist (prime example are the
`nix print-dev-env` test-cases I wrote in this patch using
`tests/shell.nix`, these would fail because the env var exists, but it
cannot read from it).
[1] https://github.com/NixOS/nix/pull/4770#issuecomment-836799719
It was disabled in c6953d1ff6 because
a recent Nixpkgs bump brought in a new systemd which changed how
systemd-nspawn worked.
As far as I can tell, the issue was caused by this upstream systemd
commit:
b71a0192c0
Bind-mounting the host's `/sys` and `/proc` into the container's
`/run/host/{sys,proc}` fixes the issue and allows the test to succeed.
https://hydra.nixos.org/build/235888160
This is needed because Nixpkgs now contains dangling symlinks
(pkgs/test/nixpkgs-check-by-name/tests/symlink-invalid/pkgs/by-name/fo/foo/foo.nix).
This is broken because of a change in systemd in NixOS 23.05. It fails
with
Failed to mount proc (type proc) on /proc (MS_NOSUID|MS_NODEV|MS_NOEXEC ""): Operation not permitted
The Derivation parser and old ATerm unfortunately leaves few ways to get
nice errors when an old version of Nix encounters a new version of the
format. The most likely scenario for this to occur is with a new client
making a derivation that the old daemon it is communicating with cannot
understand.
The extensions we just created for dynamic derivation deps will add a
version field, solving the problem going forward, but there is still the
issue of what to do about old versions of Nix up to now.
The solution here is to carefully catch the bad error from the daemon
that is likely to indicate this problem, and add some extra context to
it.
There is another "Ugly backwards compatibility hack" in
`remote-store.cc` that also works by transforming an error.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
We use the same nested map representation we used for goals, again in
order to save space. We might someday want to combine with `inputDrvs`,
by doing `V = bool` instead of `V = std::set<OutputName>`, but we are
not doing that yet for sake of a smaller diff.
The ATerm format for Derivations also needs to be extended, in addition
to the in-memory format. To accomodate this, we added a new basic
versioning scheme, so old versions of Nix will get nice errors. (And
going forward, if the ATerm format changes again the errors will be even
better.)
`parsedStrings`, an internal function used as part of parsing
derivations in A-Term format, used to consume the final `]` but expect
the initial `[` to already be consumed. This made for what looked like
unbalanced brackets at callsites, which was confusing. Now it consumes
both which is hopefully less confusing.
As part of testing, we also created a unit test for the A-Term format for
regular non-experimental derivations too.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Apply suggestions from code review
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Solves 1/3 of the infinite recursion at unknown location meme.
See #8879 for ensuring we always have a trace (for stack overflows)
We might want to re-add this for finding missing location info
*while hacking on that problem only*.
To avoid dealing with an optional `drvPath` (because we might not know
it yet) everywhere, make an `CreateDerivationAndRealiseGoal`. This goal
just builds/substitutes the derivation file, and then kicks of a build
for that obtained derivation; in other words it does the chaining of
goals when the drv file is missing (as can already be the case) or
computed (new case).
This also means the `getDerivation` state can be removed from
`DerivationGoal`, which makes the `BasicDerivation` / in memory case and
`Derivation` / drv file file case closer together.
The map type is factored out for clarity, and because we will soon hvae
a second use for it (`Derivation` itself).
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
In the Nix language, given a drv path, we should be able to construct
another string referencing to one of its output. We can do this today
with `(import drvPath).output`, but this only works for derivations we
already have.
With dynamic derivations, however, that doesn't work well because the
`drvPath` isn't yet built: importing it like would need to trigger IFD,
when the whole point of this feature is to do "dynamic build graph"
without IFD!
Instead, what we want to do is create a placeholder value with the right
string context to refer to the output of the as-yet unbuilt derivation.
A new primop in the language, analogous to `builtins.placeholder` can be
used to create one. This will achieve all the right properties. The
placeholder machinery also will match out the `outPath` attribute for CA
derivations works.
In 60b7121d2c we added that type of
placeholder, and the derived path and string holder changes necessary to
support it. Then in the previous commit we cleaned up the code
(inspiration finally hit me!) to deduplicate the code and expose exactly
what we need. Now, we can wire up the primop trivally!
Part of RFC 92: dynamic derivations (tracking issue #6316)
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
We want to be able to write down `foo.drv^bar.drv^baz`:
`foo.drv^bar.drv` is the dynamic derivation (since it is itself a
derivation output, `bar.drv` from `foo.drv`).
To that end, we create `Single{Derivation,BuiltPath}` types, that are
very similar except instead of having multiple outputs (in a set or
map), they have a single one. This is for everything to the left of the
rightmost `^`.
`NixStringContextElem` has an analogous change, and now can reuse
`SingleDerivedPath` at the top level. In fact, if we ever get rid of
`DrvDeep`, `NixStringContextElem` could be replaced with
`SingleDerivedPath` entirely!
Important note: some JSON formats have changed.
We already can *produce* dynamic derivations, but we can't refer to them
directly. Today, we can merely express building or example at the top
imperatively over time by building `foo.drv^bar.drv`, and then with a
second nix invocation doing `<result-from-first>^baz`, but this is not
declarative. The ethos of Nix of being able to write down the full plan
everything you want to do, and then execute than plan with a single
command, and for that we need the new inductive form of these types.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This enables nix to correctly report what will be fetched in the case
that everything is a cache hit.
Note however that if an intermediate build of something which is not
cached could still cause products to end up being substituted if the
intermediate build results in a CA path which is in the cache.
Fixes#8615.
Signed-off-by: Peter Waller <p@pwaller.net>
I haven't checked when this was exactly introduced, but on Nix 2.16 I
realized that the additional lines inserted when using `--precise` are
completely separated from the tree:
nix why-depends /nix/store/ccgr4faaxys39s091qridxg1947lggh4-evcxr-0.14.2 /nix/store/b7hvml0m3qmqraz1022fwvyyg6fc1vdy-gcc-12.2.0 --precise --extra-experimental-features nix-command
/nix/store/ccgr4faaxys39s091qridxg1947lggh4-evcxr-0.14.2
→ /nix/store/lcf37pgp3rgww67v9x2990hbfwx96c1w-gcc-wrapper-12.2.0
→ /nix/store/b7hvml0m3qmqraz1022fwvyyg6fc1vdy-gcc-12.2.0
└───bin/evcxr: …':'}.PATH=${PATH/':''/nix/store/lcf37pgp3rgww67v9x2990hbfwx96c1w-gcc-wrapper-12.2.0/bin'':'/':'}…
└───bin/cpp: …k disable=SC2193.[[ "/nix/store/b7hvml0m3qmqraz1022fwvyyg6fc1vdy-gcc-12.2.0/bin/cpp" = *++ ]] &&…
This is apparently because `std::cout` is buffered and flushed in the
end whereas the rest of the output isn't. The fix is rather simple, just
use `logger->cout` as it's already the case for the rest of the code.
This way we also don't need to insert additional newlines in the `hits`
map since that's something the logger takes care of.
Also added a small test to make sure that the layout of this is somehow
tested to reduce the risk of further regressions here.
Special-casing the file name is rather ugly, so we shouldn't do
that. So now any {file,http,https} URL is handled by
TarballInputScheme, except for non-flake inputs (i.e. inputs that have
the attribute `flake = false`).
As an optimisation for LocalStore, we read all the store directory entries into
a set. Checking for membership of this set is much faster than a stat syscall.
However for LocalOverlayStore, the lower store directory is expected to contain
a vast number of entries and reading them all can take a very long time.
So instead of enumerating them all upfront, we call pathExists as needed. This
means making stat syscalls for each store path, but the upper layer is expected
to be relatively small compared to the lower store so that should be okay.
Over the last year or so I've run into several use cases where I need to
parse and/or serialize URLs for use by `builtins.fetchTree` or
`builtins.getFlake`, largely in order to produce _lockfile-like_ files
for lang2nix frameworks or tools which use `nix` internally to drive
builds.
I've gone through the painstaking process of emulating
`nix::FlakeRef::fromAttrs` and `nix::parseFlakeRef` several times with
mixed success; but these are difficult to create and even harder to
maintain if I hope to stay aligned with changes to the real
parser/serializer.
I understand why adding new `builtins` isn't something we want to do
flagrantly. I'm recommending this addition simply because I keep
encountering use cases where I need to parse/serialize these URIs in
`nix` expressions, and I want a reliable solution.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Co-authored-by: John Ericson <git@JohnEricson.me>
Grouping our tests should make it easier to understand the intent than
one long poorly-arranged list. It also is convenient for running just
the tests for a specific component when working on that component.
We need at least one test group so this isn't dead code; I decided to
collect the tests for the `ca-derivations` and `dynamic-derivations`
experimental features in groups. Do
```bash
make ca.test-group -jN
```
and
```bash
make dyn-drv.test-group -jN
```
to try running just them.
I originally did this as part of #8397 for being able to just the local
overlay store alone. I am PRing it separately now so we can separate
general infra from new features.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
We were bedeviled by sandboxing issues when working on the layered
store. The problem ended up being that when we have nested nix builds,
and the inner store is inside the build dir (e.g. store is
`/build/nix-test/$name/store`, build dir is `/build`) bind mounts
clobber each other and store paths cannot be found.
After thoroughly cleaning up `local-derivation-goal.cc`, we might be
able to make that work. But that is a lot of work. For now, we just fail
earlier with a proper error message.
Finally, test this: nested sandboxing without the problematic store dir
should work, and with should fail with the expected error message.
Co-authored-by: Dylan Green <67574902+cidkidnix@users.noreply.github.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
When we pipe to `>(...)` like that, we unfortunately don't wait for the
process to finish. Better to just substitute the file.
Also, use the "unified" diff output that people (including myself) are
more familiar with, thanks to Git.
* Lang now verifies errors and parse output
* Some new miscellaneous tests
* Easy way to update the tests
* Document workflow in manual
* Use `!` not `~` as separater char for sed
It is confusing to use `~` when we are talking about paths and home
directories!
* Test test suite itself (`test/lang-test/infra.sh`)
Additionally, run shellcheck on `tests/lang.sh` to help ensure it is
correct, now that is is more complex.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Grouping our tests should make it easier to understand the intent than
one long poorly-arranged list. It also is convenient for running just
the tests for a specific component when working on that component.
We need at least one test group so this isn't dead code; I decided to
collect the tests for the `ca-derivations` and `dynamic-derivations`
experimental features in groups. Do
```bash
make ca.test-group -jN
```
and
```bash
make dyn-drv.test-group -jN
```
to try running just them.
I originally did this as part of #8397 for being able to just the local
overlay store alone. I am PRing it separately now so we can separate
general infra from new features.
When explicitly requested by the caller, as suggested in the meeting
(https://github.com/NixOS/nix/pull/8090#issuecomment-1531139324)
> @edolstra: { toPath } vs { fromPath } is too implicit
I've opted for the `inputAddressed = true` requirement, because it
we did not agree on renaming the path attributes.
> @roberth: more explicit
> @edolstra: except for the direction; not immediately clear in which direction the rewriting happens
This is in fact the most explicit syntax and a bit redundant, which is
good, because that redundancy lets us deliver an error message that
reminds expression authors that CA provides a better experience to
their users.
* nix flake check: improve error message if overlay is not a lambda
Suppose you have an overlay like this
{
inputs = { /* ... */ };
outputs = { flake-utils, ... }: flake-utils.lib.eachDefaultSystem
(system: {
overlays.default = final: prev: {
};
});
}
then `nix flake check` (correctly) fails because `overlays` are supposed
to have the structure `overlays.<name> = final: prev: exp`. However, the
error-message is a little bit counter-intuitive:
error: overlay does not take an argument named 'final'
While one might guess where the error actually comes from because the
trace above says `… while checking the overlay 'overlays.x86_64-linux'`
this is still pretty confusing because it complains about an argument
not being named `final` even though that's evidently the case.
With this change, the error-message actually makes it clear what's
wrong:
[ma27@carsten:~/Projects/nix/tmp]$ nix flake check --extra-experimental-features 'nix-command flakes' path:$(pwd)
error:
… while checking flake output 'overlays'
at /nix/store/clgblnxx003hyrq8qkz5ab6kgqkck6qc-source/flake.nix:4:5:
3| outputs = { ... }: {
4| overlays.x86_64-linux.snens = final: prev: {
| ^
5| kek = throw "snens";
… while checking the overlay 'overlays.x86_64-linux'
at /nix/store/clgblnxx003hyrq8qkz5ab6kgqkck6qc-source/flake.nix:4:5:
3| outputs = { ... }: {
4| overlays.x86_64-linux.snens = final: prev: {
| ^
5| kek = throw "snens";
error: overlay is not a lambda, but a set instead
- Improved API docs from comment
- Exit codes are for `nix-build`, not just `nix-store --release`
- Make note in tests so the magic numbers are not surprising
Picking up where #8387 left off.
Previously it was not possible to open a local store when its database is on a read-only filesystem. Obviously a store on a read-only filesystem cannot be modified, but it would still be useful to be able to query it.
This change adds a new read-only setting to LocalStore. When set to true, Nix will skip operations that fail when the database is on a read-only filesystem (acquiring big-lock, schema migration, etc), and the store database will be opened in immutable mode.
Co-authored-by: Ben Radford <benradf@users.noreply.github.com>
Co-authored-by: cidkidnix <cidkidnix@protonmail.com>
Co-authored-by: Dylan Green <67574902+cidkidnix@users.noreply.github.com>
Co-authored-by: John Ericson <git@JohnEricson.me>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
If the garbage collector has acquired the global GC lock, but hasn't
created the GC socket yet, then a client attempting to connect would
get ENOENT. Note that this only happens when the GC runs for the first
time on a machine. Subsequently clients will get ECONNREFUSED which
was already handled.
Fixes#7370.
A library shouldn't require changes to the caller's argument handling,
especially if it doesn't have to, and indeed we don't have to.
This changes the lookup order to prioritize the hardcoded path to nix
if it exists. The static executable still finds itself through /proc
and the like.
The remaining constructor RegisterPrimOp::RegisterPrimOp(Info && info)
allows specifying the documentation in .args and .doc members of the
Info structure.
Commit 8ec1ba0210 removed all uses of the removed constructor in the
nix binary. Here, we remove the constructor completely as well as its
use in a plugin test. According to #8515, we didn't promis to maintain
compatibility with external plugins.
Fixes#8515
Previously, for tarball flakes, we recorded the original URL of the
tarball flake, rather than the URL to which it ultimately
redirects. Thus, a flake URL like
http://example.org/patchelf-latest.tar that redirects to
http://example.org/patchelf-<revision>.tar was not really usable. We
couldn't record the redirected URL, because sites like GitHub redirect
to CDN URLs that we can't rely on to be stable.
So now we use the redirected URL only if the server returns the
`x-nix-is-immutable` or `x-amz-meta-nix-is-immutable` headers in its
response.
Currently `fromTOML` throws an exception when encountering a timestamp
since the Nix language lacks a way to represent them.
This patch changes this beaviour and makes `fromTOML` parse timestamps as
attrsets of the format
{ _type = "timestamp"; value = "1979-05-27T07:32:00Z"; }
This is guarded by an experimental feature flag to leave room for iterating on the representation.
The primop `builtins.replaceStrings` currently always strictly evaluates the
replacement strings, however time and space are wasted for their computation
if the corresponding pattern do not occur in the input string. This commit
makes the evaluation of the replacement strings lazy by deferring their
evaluation to when the corresponding pattern are matched and memoize the result
for efficient retrieval on subsequent matches.
The testcases for replaceStrings was updated to check for lazy evaluation
of the replacements. A note was also added in the release notes to
document the behavior change.
- If the element comes from a flake, print the full flakeref (with the
fragment part) and not just the reference to the flake itself
- If the element doesn't come from a flake, print its store path(s)
This is a bit too verbose, but has the advantages of being correct (and
not crashing), so it's strictly better than the previous situation
Fix https://github.com/NixOS/nix/issues/8284
As discussed in #7417, it would be good to make more string values work
as installables. That is to say, if an installable refers to a value,
and the value is a string, it used to not work at all, since #7484, it
works somewhat, and this PR make it work some more.
The new cases that are added for `BuiltPath` contexts:
- Fixed input- or content-addressed derivation:
```
nix-repl> hello.out.outPath
"/nix/store/jppfl2bp1zhx8sgs2mgifmsx6dv16mv2-hello-2.12"
nix-repl> :p builtins.getContext hello.out.outPath
{ "/nix/store/c7jrxqjhdda93lhbkanqfs07x2bzazbm-hello-2.12.drv" = { outputs = [ "out" ]; }; }
The string matches the specified single output of that derivation, so
it should also be valid.
- Floating content-addressed derivation:
```
nix-repl> (hello.overrideAttrs (_: { __contentAddressed = true; })).out.outPath
"/1a08j26xqc0zm8agps8anxpjji410yvsx4pcgyn4bfan1ddkx2g0"
nix-repl> :p builtins.getContext (hello.overrideAttrs (_: { __contentAddressed = true; })).out.outPath
{ "/nix/store/qc645pyf9wl37c6qvqzaqkwsm1gp48al-hello-2.12.drv" = { outputs = [ "out" ]; }; }
```
The string is not a path but a placeholder, however it also matches
the context, and because it is a CA derivation we have no better
option. This should also be valid.
We may also want to think about richer attrset based values (also
discussed in that issue and #6507), but this change "completes" our
string-based building blocks, from which the others can be desugared
into or at least described/document/taught in terms of.
Progress towards #7417
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Fixes#8309
This regression was because both `CmdDevelop` and `CmdPrintDevEnv` were
switched to be `InstallableValueCommand` subclasses, but actually
neither should have been.
The `nixpkgsFlakeRef` method should indeed not be on the base
installable class, because "flake refs" and "nixpkgs" are not
installable-wide notions, but that doesn't mean these commands should
only accept installable values.
This fixes a bug in commands like `nix eval' which would emit invalid attribute
sets if they contained reserved keywords such as "assert", "let", etc.
These keywords will not be quoted when printed, making them valid expressions.
All keywords recognized by the lexer are quoted except "or", which does not
require quotation.
fe5509df caused only wanted outputs to be passed to the
post-build-hook, which resulted in paths being built
without ever going into the hook.
This commit adds a (currently failing) test for this.
Previously, we relied on the `shutdown()` function to terminate `accept()`
calls on a listening socket. However, this approach did not work on macOS as
the waiting `accept()` call is not considered a connected socket, resulting in
an `ENOTCONN` error. Instead, we now close the listening socket to terminate
the `accept()` call.
Additionally, we fixed a resource management issue where we set the
`daemonSocket` variable to -1, triggering resource cleanup and causing the
`stopDaemon` function to be called twice. This resulted in errors as the socket
was already closed by the time the second `stopDaemon` call was made. Instead of
setting `daemonSocket` to -1, we now release the socket using the `release()`
method on a unique pointer. This properly transfers ownership and allows for
correct resource cleanup.
These changes ensure proper behavior and resource management for the
recursive-nix feature on macOS.
We finally test the status quo of remote build trust in a number of
ways. We create a new experimental feature on `nix-daemon` to do so.
PR #3921, which improves the situation with trustless remote building,
will build upon these changes. This code / tests was pull out of there
to make this, so everything is easier to review, and in particular we
test before and after so the new behavior in that PR is readily apparent
from the testsuite diff alone.
Issues:
1. Features gated on disabled experimental settings should warn and be
ignored, not silently succeed.
2. Experimental settings in the same config "batch" (file or env var)
as the enabling of the experimental feature should work.
3. For (2), the order should not matter.
These are analogous to the issues @roberth caught with my changes for
arg handling, but they are instead for config handling.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
This is somewhat hacky fix just for 2.15. I unintentionally hid them
from the manual, when no one wanted to hide them that (including
myself). I also required the experimental feature to be enabled in an
order-dependent way, which is not good.
The simplest fix for this immanent release is just to always show them,
and always allow them to be set.
Effectively undoes some changes from aa663b7e89
This function returns true or false depending on whether the Nix client
is trusted or not. Mostly relevant when speaking to a remote store with
a daemon.
We include this information in `nix ping store` and `nix doctor`
Co-Authored-By: John Ericson <John.Ericson@Obsidian.Systems>
This introduces the SourcePath type from lazy-trees as an abstraction
for accessing files from inputs that may not be materialized in the
real filesystem (e.g. Git repositories). Currently, however, it's just
a wrapper around CanonPath, so it shouldn't change any behaviour. (On
lazy-trees, SourcePath is a <InputAccessor, CanonPath> tuple.)
Prior to this, there was an ad-hoc whitelist in `main.cc`. Now, every
command states its stability.
In a future PR, we will adjust the manual to take advantage of this new
information in the JSON.
(It will be easier to do that once we have some experimental feature
docs to link too; see #5930 and #7798.)
Was probably an overlook of when the tests were first added, but that
now messes-up with the `nix-channel --update` that happens down the line
(and can't access the network since we're inside a Nix build)
