User on Matrix reported install problems which presented as
"vifs:editing error" which we traced back to vim griping about an
existing swap file. When opened interactively, it did this:
E325: ATTENTION
Found a swap file by the name "/etc/.fstab.swp"
owned by: root dated: Sön Apr 24 16:54:10 2022
file name: /private/etc/fstab
modified: YES
user name: root host name: MBP.local
process ID: 1698
While opening file "/etc/fstab"
dated: Sön Apr 24 16:56:27 2022
NEWER than swap file!
...
On Linux a user can go through all the way through the multi-user install
and find out at the end that they now have to manually configure their
init system to launch the nix daemon.
I suspect that for a significant number of users this is not
what they wanted. They might prefer a single-user install.
Now they have to manually uninstall nix before they can
go through the single-user install.
This introduces a confirmation dialog before the install
in that specific situation to make sure that they want to proceed.
See also: https://github.com/NixOS/nix/issues/4999#issuecomment-1064188080
This closes#4999 but rejecting it and closing that issue anyways
would also be valid.
While `create_directories()` from install-multi-user.sh seems to already
create parts of the directory structure, it's marked as deprecated, and
it won't hurt also copying over the tmpfiles config and have it execute
once.
Same as 1fd127a068, but applied to a
code path (volume_pass_works -> verify_volume_pass) that the reporting
user didn't hit and wasn't able to trigger manually. I am not certain
but I suspect it will be easier to add prophylactically than to debug
if its absence causes trouble some day.
While trying to figure out how `nix-env`/`nix profile` work I had a hard
time understand how man pages were being installed.
Took me quite some time to figure this out, thought it might be useful
to others too!
Fixes#6122, which reports a problem with trying to run the installer
under another user (probably: user is not the disk "owner" and thus
can't mount the volume).
The script is trying to find chown in a cross-platform-like
way, but there's some sort of deficiency in `command -p` in
the default macOS bash 3.2. It looks like it will just use
whatever PATH is already set, instead of the "default" path.
This attempts to hard-set a PATH via `getconf PATH`. It will
just set an empty PATH if that fails for some reason. A
properly-functioning `command -p` should not care what we
set the PATH to here one way or the other.
Hopefully fixes#5768.
Same purpose as de9efa3b79af7886fcf2a67b6ce97d4f96a57421
For some unclear reason, we get occasional reports from people who do
not have /usr/sbin on their PATH that the installer fails. It's a
standard part of the PATH, so I have no clue what they're doing to
remove it--but it's also fairly cheap to avoid.
Add a regular github action that will check the status of the latest
hydra evaluation.
Things aren’t ideal right now because this job will only notify “the
user who last modified the cron syntax in the workflow file” (so myself
atm). But at least that’ll give a notification for failing hydra jobs
We had a macOS user present in Matrix with some confusion because the
lack of a clear task statement here made them think the error meant
that a problem had occurred during the preceding task in a macOS
install: "Fixing any leftover Nix volume state"
This adds an explicit unmount of the store volume to avoid cases
where the installer can hang in await_volume when:
- the user already has a store volume
- that volume is already mounted somewhere other than /nix
- they do not take a path through the installer that results in an
explicit unmount (as both removing and encrypting the volume
would do)
ShellCheck correctly warns:
In scripts/install-nix-from-closure.sh line 218:
echo -e "\nif [ -e $p ]; then . $p; fi # added by Nix installer" >> "$fn"
^-- SC3037: In POSIX sh, echo flags are undefined.
In scripts/install-nix-from-closure.sh line 229:
echo -e "\nif [ -e $p ]; then . $p; fi # added by Nix installer" >> "$fn"
^-- SC3037: In POSIX sh, echo flags are undefined.
Indeed, this actually breaks on Ubuntu where /bin/sh is dash.
Fixes#5458.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
As reported in #5198, volume creation can fail with a permission error
for some macOS users (probably secondary user accounts?) Sudo appears
to be sufficient to avoid this.
While I'm here, I also updated the sudo invocation added in 079bde2ae
to use the _sudo explanation wrapper.
This reverts commit 909d8cb293.
This messes up PATH priority since /etc/profile gets sourced AFTER
/etc/zshenv and it sets the system paths so
$HOME/.nix-profile/bin:/nix/var/nix/profiles/default/bin is behind
/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin. See discussion in
https://github.com/NixOS/nix/issues/4169.
When commit 233b61d3d6 (#4224) renamed
@binaryTarball_${system}@ to @tarballHash_${system}@, it updated this
reference for every platform except Darwin.arm64.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
While the progress dots during the copying of the store work fine on a
normal terminal, those look pretty off if the script is run inside a
provisioning script of e.g. `vagrant` or `packer` where `stderr` and
`stdout` are captured:
default: .
default: ..
default: .
default: .
default: .
To work around this, the script checks with `-t 0` if it's
running on an actual terminal and doesn't show the progress if that's not
the case.
gnu-config standardized on aarch64 for machine name so host_cpu part
of $system will always be aarch64. That means system will be
aarch64-darwin too.
uname however could report either “aarch64” (if gnu coreutils) or
“arm64” (if apple’s uname). We should support both for compatiblity
here.
NIX_PROFILES is space separated list of directories, and passing it into
for as is is considered to be 1-element list with the whole string. With
shwordsplit option Zsh emulates other shells in this regard ans
implicitely splits unquoted strings into words.
Fixes#4167.
Env vars for ZSH were moved from /etc/zshrc to /etc/zshenv in #3608
to address an issue with zshrc getting clobbered by OS updates, but
/etc/zshenv doesn't exist by default--so *nothing* would get set up
for zsh users unless they already happened to have /etc/zshenv.
Creating these files if they don't exist. Also cut separate creation
of profile.d/nix.sh, which isn't needed now.
Some of the changes in #3788 to support non-systemd Nix installs
don't appear to be aware that the darwin installer exists, which
resulted in some skipped steps and inappropriate instructions.
As mentioned in previous commit, Big Sur changes the syntax for the
xpath command slightly.
In the process of testing out replacements for these, I noticed a few
small simplification wins.
- xpath -> xmllint: xpath's cli interface changed in Big Sur
rather than add conditional logic for picking the correct
syntax for xpath, I'm changing to xmllint --xpath, which
appears to be consistent across versions I've tested...
- /plist/dict/key[text()='Writable']/following-sibling::true[1]
doesn't do quite what's expected. It was written to try to
select a <true /> node paired with the Writable key, but it
will also select the *next* <true /> node that appears even
if it was paired with another key.
- I think there's also a logic bug in the conditionals here.
I'm not sure anyone ever actuall saw it, thanks to the xpath
bug, though. With the xpath fix, this conditional passes if /nix
does not exist, / IS writable, and the version is Catalina+.
I think it meant to test for /nix does not exist, / is NOT
writable, and the version is Catalina+. I reworked this lightly
to make it a little clearer at the code level.
On macOS the system tar has builtin support for lzma while xz isn't
available as a separate binary. There's no builtin package manager
there available either so having to install lzma (without nix) would be
rather painful.
This should handle installation scenarios we can handle with
anything resembling confidence. Goal is approximating the existing
setup--not enforcing a best-practice...
Approaches (+ installer-handled, - manual) and configs each covers:
+ no change needed; /nix OK on boot volume:
All pre-Catalina (regardless of T2 or FileVault use)
+ create new unencrypted volume:
Catalina, pre-T2, no FileVault
+ create new encrypted-at-rest volume:
Catalina, pre-T2, FileVault
Catalina, T2, no FileVault
- require user to pre-create encrypted volume
Catalina, T2, FileVault
