We've added the variant to `DerivationOutput` to support them, but made
`DerivationOutput::path` partial to avoid actually implementing them.
With this chage, we can all collaborate on "just" removing
`DerivationOutput::path` calls to implement CA derivations.
The `m` acts as termination-symbol when declaring graphics. Because
of this, the `;1m` doesn't have any effect and is directly printed to
the console:
```
$ nix repl
> builtins.fetchGit { /* ... */ }
{ outPath = "/nix/store/s0f0iz4a41cxx2h055lmh6p2d5k5bc6r-source"; rev = "e73e45b723a9a6eecb98bd5f3df395d9ab3633b6"; revCount = ;1m428; shortRev = "e73e45b"; submodules = ;1mfalse; }
```
Introduced by 6403508f5a.
This reduces memory consumption of
nix-instantiate \
-E 'with import <nixpkgs> {}; runCommand "foo" { src = ./blender; } "echo foo"' \
--option nar-buffer-size 10000
(where ./blender is a 1.1 GiB tree) from 1716 to 36 MiB, while still
ensuring that we don't do any write I/O for small source paths (up to
'nar-buffer-size' bytes). The downside is that large paths are now
always written to a temporary location in the store, even if they
produce an already valid store path. Thus, adding large paths might be
slower and run out of disk space. ¯\_(ツ)_/¯ Of course, you can always
restore the old behaviour by setting 'nar-buffer-size' to a very high
value.
This allows you to refer to an input from another flake. For example,
$ nix run --inputs-from /path/to/hydra nixpkgs#hello
runs 'hello' from the 'nixpkgs' inputs of the 'hydra' flake.
Fixes#3769.
'nix run' will try to run $out/bin/<name>, where <name> is the
derivation name (excluding the version). This often works well:
$ nix run nixpkgs#hello
Hello, world!
$ nix run nix -- --version
nix (Nix) 2.4pre20200626_adf2fbb
$ nix run patchelf -- --version
patchelf 0.11.20200623.e61654b
$ nix run nixpkgs#firefox -- --version
Mozilla Firefox 77.0.1
$ nix run nixpkgs#gimp -- --version
GNU Image Manipulation Program version 2.10.14
though not always:
$ nix run nixpkgs#git
error: unable to execute '/nix/store/kp7wp760l4gryq9s36x481b2x4rfklcy-git-2.25.4/bin/git-minimal': No such file or directory
Generalize `queryDerivationOutputNames` and `queryDerivationOutputs` by
adding a `queryDerivationOutputMap` that returns the map
`outputName=>outputPath`
(not that this is not equivalent to merging the results of
`queryDerivationOutputs` and `queryDerivationOutputNames` as sets don't
preserve the order, so we would end up with an incorrect mapping).
squash! Add a way to get all the outputs of a derivation with their label
Rename StorePathMap to OutputPathMap
Now the derivation outputs are parsed up front, we can avoid a reparse
by doing it. Also, this just feels a bit better as the `output*` env
vars are more of a `libnixexpr` interface than `libnixstore` interface:
ultimately, it's the derivation outputs that decide whether the
derivation is fixed-output.
Yes, hashed mirrors might go away with #3689, but this bit of code would
be moved rather than deleted, so it's worth doing a cleanup anyways I
think.
When we merge with master, the new lack of string types make this case
impossible (after parsing). Later, when we actually implemenent
CA-derivations, we'll change the types to allow that.
We have a larger problem that passsing computed strings to the first
variable argument of many exception constructors is unsafe because that
first variable argument is interpreted not as a plain string, but format
string, and if it contains '%' boost::format will abort, since there are
no arguments to the format string.
In this particular instance '%' was used as part of an escape code in a
URL, which, when the download failed, caused Nix to abort displaying the
`FileTransferError`.
This is a bit complex because we want to expose extra functionality the
wrapped class has. Perhaps there is some inheritancy trickery to do this
nicer, but I don't know it, and this is the first thing we tried after a
series of attempts that did build.
This design is kind of like that of Rust's Writer, Reader, or Iter
adapters, which impliment more traits based on what the inner type
implements.
This was introduced in fa125b9b28, and
then "reverted" in 1cf4801108, except that
revert left the struct around doing nothing useful.
We're removing it all the way now because we want to make a new
`TeeSink` complementing the already-exiting `TeeSource`, that is
actually a completely different concept as far as the class hierarchy is
concerned.
I’m not 100% sure this is wanted since it kind of makes everything
have to know about ca even if they don’t really want to. But it also
make things easier in dealing with looking up ca.
E.g.
$ nix run nixpkgs#hello
error: --- Error ---------- nix
flake 'flake:nixpkgs' does not provide attribute 'apps.x86_64-linux.hello' or 'hello'
instead of
$ nix run nixpkgs#hello
error: --- Error ---------- nix
flake 'flake:nixpkgs' does not provide attribute 'hello'
Not implementing anything here, just throwing an error if a derivation
sets `__contentAddressed = true` without
`--experimental-features content-addressed-paths`
(and also with it as there's nothing implemented yet)
This further continues with the dependency inverstion. Also I just went
ahead and exposed `parseDerivation`: it seems like the more proper
building block, and not a bad thing to expose if we are trying to be
less wedded to drv files on disk anywas.
On nix-env -qa -f '<nixpkgs>', this reduces maximum RSS by 20970 KiB
and runtime by 0.8%. This is mostly because we're not parsing the hash
part as a hash anymore (just validating that it consists of base-32
characters).
Also, replace storePathToHash() by StorePath::hashPart().
E.g. instead of
error: --- BuildError ----------------------------------------------- nix
builder for '/nix/store/03nk0a3n8h2948k4lqfgnnmym7knkcma-foo.drv' failed with exit code 1
error: --- Error ---------------------------------------------------- nix
build of '/nix/store/03nk0a3n8h2948k4lqfgnnmym7knkcma-foo.drv' failed
we now get
error: --- Error ---------------------------------------------------- nix
builder for '/nix/store/03nk0a3n8h2948k4lqfgnnmym7knkcma-foo.drv' failed with exit code 1
Originally, the test was only checking for different “real” storeDir.
That’s an easy case to handle, but the much harder one is if different
virtual store dirs are used. To do this, we need the SubstitutionGoal
to know about the ca, so it can recalculate the path to copy it over.
An important note here is that the store path passed to copyStorePath
needs to be one for srcStore - so that queryPathInfo works properly.
This also adds an error message when the store path from queryPathInfo
is different from the one we requested.
Substituters can substitute from one store dir to another with a
little bit of help. The store api just needs to have a CA so it can
recompute the store path based on the new store dir. We can only do
this for fixed output derivations with no references, though.
This function was used in only one place, where it could easily be
replaced by readDerivation() since it's not
performance-critical. (This function appears to have been modelled
after queryDerivationOutputs(), which exists only to make the garbage
collector faster.)
This fixes an issue where lockfile generation was not idempotent:
after updating a lockfile, a "follows" node would end up pointing to a
new copy of the node, rather than to the original node.
fetchTarball, fetchTree, and fetchGit all have *optional* hash attrs.
This means that we need to be careful with what we allow to avoid
accidentally making these defaults. When ‘hash = ""’ we assume the
empty hash is wanted.
follow up of https://github.com/NixOS/nix/pull/3544
This allows hash="" so that it can be used for debugging purposes. For
instance, this gives you an error message like:
warning: found empty hash, assuming you wanted 'sha256:0000000000000000000000000000000000000000000000000000'
hash mismatch in fixed-output derivation '/nix/store/asx6qw1r1xk6iak6y6jph4n58h4hdmbm-nix':
wanted: sha256:0000000000000000000000000000000000000000000000000000
got: sha256:0fpfhipl9v1mfzw2ffmxiyyzqwlkvww22bh9wcy4qrfslb4jm429
Needed so that we can include it as a logger in loggers.cc without
adding a dependency on nix
This also requires moving names.hh to libutil to prevent a circular
dependency between libmain and libexpr
Make the printing of the build logs systematically go through the
logger, and replicate the behavior of `no-build-output` by having two
different loggers (one that prints the build logs and one that doesn't)
Add a new `--log-format` cli argument to change the format of the logs.
The possible values are
- raw (the default one for old-style commands)
- bar (the default one for new-style commands)
- bar-with-logs (equivalent to `--print-build-logs`)
- internal-json (the internal machine-readable json format)
The initial contents of the flake is specified by the
'templates.<name>' or 'defaultTemplate' output of another flake. E.g.
outputs = { self }: {
templates = {
nixos-container = {
path = ./nixos-container;
description = "An example of a NixOS container";
};
};
};
allows
$ nix flake init -t templates#nixos-container
Also add a command 'nix flake new', which is identical to 'nix flake
init' except that it initializes a specified directory rather than the
current directory.
bool coerces anything >0 to true, but in the future we may have other
file ingestion methods. This shows a better error message when the
“recursive” byte isn’t 1.
Instead, `Hash` uses `std::optional<HashType>`. In the future, we may
also make `Hash` itself require a known hash type, encoraging people to
use `std::optional<Hash>` instead.
Caches tree in addition to lockedRef, and explicitly writes out the logic for different combinations of cached/uncached flakes and indirect/resolved/locked flakes. This eliminates uneccessary calls to lookupInFlakeCache, fetchTree, maybeLookupFlake, and flakeCache.push_back
As `git fetch` may chose to interpret refspec to it's liking, ensure that we
only pass refs that begin with `refs/` as is, otherwise, prepend them with
`refs/heads`. Otherwise, branches named `heads/foo` (I know it's bad, but it's
allowed), would be fetched as `foo`, instead of `heads/foo`.
The previous regex was too strict and did not match what git was allowing. It
could lead to `fetchGit` not accepting valid branch names, even though they
exist in a repository (for example, branch names containing `/`, which are
pretty standard, like `release/1.0` branches).
The new regex defines what a branch name should **NOT** contain. It takes the
definitions from `refs.c` in https://github.com/git/git and `git help
check-ref-format` pages.
This change also introduces a test for ref name validity checking, which
compares the result from Nix with the result of `git check-ref-format --branch`.
The attributes previously stored in TreeInfo (narHash, revCount,
lastModified) are now stored in Input. This makes it less arbitrary
what attributes are stored where.
As a result, the lock file format has changed. An entry like
"info": {
"lastModified": 1585405475,
"narHash": "sha256-bESW0n4KgPmZ0luxvwJ+UyATrC6iIltVCsGdLiphVeE="
},
"locked": {
"owner": "NixOS",
"repo": "nixpkgs",
"rev": "b88ff468e9850410070d4e0ccd68c7011f15b2be",
"type": "github"
},
is now stored as
"locked": {
"owner": "NixOS",
"repo": "nixpkgs",
"rev": "b88ff468e9850410070d4e0ccd68c7011f15b2be",
"type": "github",
"lastModified": 1585405475,
"narHash": "sha256-bESW0n4KgPmZ0luxvwJ+UyATrC6iIltVCsGdLiphVeE="
},
The 'Input' class is now a dumb set of attributes. All the fetcher
implementations subclass InputScheme, not Input. This simplifies the
API.
Also, fix substitution of flake inputs. This was broken since lazy
flake fetching started using fetchTree internally.
The idea is it's always more flexible to consumer a `Source` than a
plain string, and it might even reduce memory consumption.
I also looked at `addToStoreFromDump` with its `// FIXME: remove?`, but
the worked needed for that is far more up for interpretation, so I
punted for now.
This moves the actual parsing of configuration contents into applyConfig
which applyConfigFile is then going to call. By changing this we can now
test the configuration file parsing without actually create a file on
disk.
This makes 'nix flake' less cluttered and more consistent (it's only
subcommands that operator on a flake). Also, the registry is not
inherently flake-related (e.g. fetchTree could also use it to remap
inputs).
This completes flakerefs using the registry (e.g. 'nix<TAB>' => 'nix
nixpkgs') and flake output attributes by evaluating the flake
(e.g. 'dwarffs#nix<TAB>' => 'dwarffs#nixosModules').
InstallableValue has children InstallableFlake and InstallableAttrPath, but InstallableFlake was overriding toDerivations, and usage was changed so that InstallableFlake didn't need cmd. So these changes were made:
InstallableValue::toDerivations() -> InstalllableAttrPath::toDerivations()
InstallableValue::cmd -> InstallableAttrPath::cmd
InstallableValue uses state instead of cmd
toBuildables() and toDerivations() were made abstract
- result list will be always empty if --json is passed
- for scripts an empty search result is not really an error,
we rather want to distinguish between evaluation errors and empty results
The raw stderr output isn't logged anymore so the build logs need to be
printed by the default logger in order for the old commands like
nix-build to still show build output.
For remote stores the log messages are already forwarded as structured
STDERR_RESULT messages so the old format is duplicate information. But
still included with -vvv since it could be useful for debugging
problems.
$ nix build -L /nix/store/nl71b2niws857ffiaggyrkjwgx9jjzc0-foo.drv --store ssh-ng://localhost
Hello World!
foo> Hello World!
[1/0/1 built] building foo
Fixes#3556
When used with `readFile`, we have a pretty good heuristic of the file
size, so `reserve` this in the `string`. This will save some allocation
/ copy when the string is growing.
This means you now get an error message *before* stuff gets built:
$ nix copy .#hydraJobs.vendoredCrates
error: you must pass '--from' and/or '--to'
Try 'nix --help' for more information.
The commit 3cc1125595 adds a `grantpt`
call on the builder pseudo terminal fd. This call is actually only
required for MacOS, but it however requires a RW access to /dev/pts
which is only RO bindmounted in the Bazel Linux sandbox. So, Nix can
not be actually run in the Bazel Linux sandbox for unneeded reasons.
This closes#3026 by allowing `builtins.readFile` to read a file with a
wrongly reported file size, for example, files in `/proc` may report a
file size of 0. Reading file in `/proc` is not a good enough motivation,
however I do think it just makes nix more robust by allowing more file
to be read. Especially, I do considerer the previous behavior to be
dangerous because nix was previously reading truncated files. Examples
of file system which incorrectly report file size may be network file
system or dynamic file system (for performance reason, a dynamic file
system such as FUSE may generate the content of the file on demand).
```
nix-repl> builtins.readFile "/proc/version"
""
```
With this commit:
```
nix-repl> builtins.readFile "/proc/version"
"Linux version 5.6.7 (nixbld@localhost) (gcc version 9.3.0 (GCC)) #1-NixOS SMP Thu Apr 23 08:38:27 UTC 2020\n"
```
Here is a summary of the behavior changes:
- If the reported size is smaller, previous implementation
was silently returning a truncated file content. The new implementation
is returning the correct file content.
- If a file had a bigger reported file size, previous implementation was
failing with an exception, but the new implementation is returning the
correct file content. This change of behavior is coherent with this pull
request.
Open questions
- The behavior is unchanged for correctly reported file size, however
performances may vary because it uses the more complex sink interface.
Considering that sink is used a lot, I don't think this impacts the
performance a lot.
- `builtins.readFile` on an infinite file, such as `/dev/random` may
fill the memory.
- it does not support adding file to store, such as `${/proc/version}`.
In particular, doing 'nix build /path/to/dir' now works if
/path/to/dir is not a Git tree (it only has to contain a flake.nix
file).
Also, 'nix flake init' no longer requires a Git tree (but it will do a
'git add flake.nix' if it's a Git tree)
Suppose I have a path /nix/store/[hash]-[name]/a/a/a/a/a/[...]/a,
long enough that everything after "/nix/store/" is longer than 4096
(MAX_PATH) bytes.
Nix will happily allow such a path to be inserted into the store,
because it doesn't look at all the nested structure. It just cares
about the /nix/store/[hash]-[name] part. But, when the path is deleted,
we encounter a problem. Nix will move the path to /nix/store/trash, but
then when it's trying to recursively delete the trash directory, it will
at some point try to unlink
/nix/store/trash/[hash]-[name]/a/a/a/a/a/[...]/a. This will fail,
because the path is too long. After this has failed, any store deletion
operation will never work again, because Nix needs to delete the trash
directory before recreating it to move new things to it. (I assume this
is because otherwise a path being deleted could already exist in the
trash, and then moving it would fail.)
This means that if I can trick somebody into just fetching a tarball
containing a path of the right length, they won't be able to delete
store paths or garbage collect ever again, until the offending path is
manually removed from /nix/store/trash. (And even fixing this manually
is quite difficult if you don't understand the issue, because the
absolute path that Nix says it failed to remove is also too long for
rm(1).)
This patch fixes the issue by making Nix's recursive delete operation
use unlinkat(2). This function takes a relative path and a directory
file descriptor. We ensure that the relative path is always just the
name of the directory entry, and therefore its length will never exceed
255 bytes. This means that it will never even come close to AX_PATH,
and Nix will therefore be able to handle removing arbitrarily deep
directory hierachies.
Since the directory file descriptor is used for recursion after being
used in readDirectory, I made a variant of readDirectory that takes an
already open directory stream, to avoid the directory being opened
multiple times. As we have seen from this issue, the less we have to
interact with paths, the better, and so it's good to reuse file
descriptors where possible.
I left _deletePath as succeeding even if the parent directory doesn't
exist, even though that feels wrong to me, because without that early
return, the linux-sandbox test failed.
Reported-by: Alyssa Ross <hi@alyssa.is>
Thanks-to: Puck Meerburg <puck@puckipedia.com>
Tested-by: Puck Meerburg <puck@puckipedia.com>
Reviewed-by: Puck Meerburg <puck@puckipedia.com>
Reduces the number of store queries it performs. Also prints a warning
if any of the selectors did not match any installed derivations.
UX Caveats:
- Will print a warning that nothing matched if a previous selector
already removed the path
- Will not do anything if no selectors were provided (no change from
before).
Fixes#3531
In particular, we store whether an attribute failed to evaluate (threw
an exception) or was an unsupported type. This is to ensure that a
repeated 'nix flake show' never has to evaluate anything, so it can
execute without fetching the flake.
With this, 'nix flake show nixpkgs/nixos-20.03 --legacy' executes in
0.6s (was 3.4s).
This speeds up the creation of the cache for the nixpkgs flake from
21.2s to 10.2s. Oddly, it also speeds up querying the cache
(i.e. running 'nix flake show nixpkgs/nixos-20.03 --legacy') from 4.2s
to 3.4s.
(For comparison, running with --no-eval-cache takes 9.5s, so the
overhead of building the SQLite cache is only 0.7s.)
In the fully cached case for the 'nixpkgs' flake, it went from 101s to
4.6s. Populating the cache went from 132s to 17.4s (which could
probably be improved further by combining INSERTs).
Usually this just writes to stdout, but for ProgressBar, we need to
clear the current line, write the line to stdout, and then redraw the
progress bar.
(cherry picked from commit 696c026006)
Usually this just writes to stdout, but for ProgressBar, we need to
clear the current line, write the line to stdout, and then redraw the
progress bar.
Motivation: maintain project-level configuration files.
Document the whole situation a bit better so that it corresponds to the
implementation, and add NIX_USER_CONF_FILES that allows overriding
which user files Nix will load during startup.
Previously the memory would occasionally be collected during eval since
the GC doesn't consider the member variable as alive / doesn't scan the
region of memory where the pointer lives.
By using the traceable_allocator<T> allocator provided by Boehm GC we
can ensure the memory isn't collected. It should be properly freed when
SourceExprCommand goes out of scope.
This doesn't just cause problems for nix-store --serve but also results
in certain build failures. Builds that use unix domain sockets in their
tests often fail because the /var/folders prefix already consumes more
than half of the maximum length of socket paths.
struct sockaddr_un {
sa_family_t sun_family; /* AF_UNIX */
char sun_path[108]; /* Pathname */
};
Temporarily add user-write permission to build directory so that it
can be moved out of the sandbox to the store with a .check suffix.
This is necessary because the build directory has already had its
permissions set read-only, but write permission is required
to update the directory's parent link to move it out of the sandbox.
Updated the related --check "derivation may not be deterministic"
messages to consistently use the real store paths.
Added test for non-root sandbox nix-build --check -K to demonstrate
issue and help prevent regressions.
Future editions of flakes or the Nix language can be supported by
renaming flake.nix (e.g. flake-v2.nix). This avoids a bootstrap
problem where we don't know which grammar to use to parse
flake*.nix. It also allows a project to support multiple flake
editions, in theory.
With --check and the --keep-failed (-K) flag, the temporary directory
was being retained regardless of whether the build was successful and
reproducible. This removes the temporary directory, as expected, on
a reproducible check build.
Added tests to verify that temporary build directories are not
retained unnecessarily, particularly when using --check with
--keep-failed.
This fetchers copies a plain directory (i.e. not a Git/Mercurial
repository) to the store (or does nothing if the path is already a
store path).
One use case is to pin the 'nixpkgs' flake used to build the current
NixOS system, and prevent it from being garbage-collected, via a
system registry entry like this:
{
"from": {
"id": "nixpkgs",
"type": "indirect"
},
"to": {
"type": "path",
"path": "/nix/store/rralhl3wj4rdwzjn16g7d93mibvlr521-source",
"lastModified": 1585388205,
"rev": "b0c285807d6a9f1b7562ec417c24fa1a30ecc31a"
},
"exact": true
}
Note the fake "lastModified" and "rev" attributes that ensure that the
flake gives the same evaluation results as the corresponding
Git/GitHub inputs.
(cherry picked from commit 12f9379123)
This provides a pluggable mechanism for defining new fetchers. It adds
a builtin function 'fetchTree' that generalizes existing fetchers like
'fetchGit', 'fetchMercurial' and 'fetchTarball'. 'fetchTree' takes a
set of attributes, e.g.
fetchTree {
type = "git";
url = "https://example.org/repo.git";
ref = "some-branch";
rev = "abcdef...";
}
The existing fetchers are just wrappers around this. Note that the
input attributes to fetchTree are the same as flake input
specifications and flake lock file entries.
All fetchers share a common cache stored in
~/.cache/nix/fetcher-cache-v1.sqlite. This replaces the ad hoc caching
mechanisms in fetchGit and download.cc (e.g. ~/.cache/nix/{tarballs,git-revs*}).
This also adds support for Git worktrees (c169ea5904).
This is useful for finding out what a registry lookup resolves to, e.g
$ nix flake info patchelf
Resolved URL: github:NixOS/patchelf
Locked URL: github:NixOS/patchelf/cd7955af31698c571c30b7a0f78e59fd624d0229
When encountering an unsupported protocol, there's no need to retry.
Chances are, it won't suddenly be supported between retry attempts;
error instead. Otherwise, you see something like the following:
$ nix-env -i -f git://git@github.com/foo/bar
warning: unable to download 'git://git@github.com/foo/bar': Unsupported protocol (1); retrying in 335 ms
warning: unable to download 'git://git@github.com/foo/bar': Unsupported protocol (1); retrying in 604 ms
warning: unable to download 'git://git@github.com/foo/bar': Unsupported protocol (1); retrying in 1340 ms
warning: unable to download 'git://git@github.com/foo/bar': Unsupported protocol (1); retrying in 2685 ms
With this change, you now see:
$ nix-env -i -f git://git@github.com/foo/bar
error: unable to download 'git://git@github.com/foo/bar': Unsupported protocol (1)
When we do something like 'nix flake update --override-input nixpkgs
...', the override is now kept on subsequent calls. (If you don't want
this behaviour, you can use --no-write-lock-file.)
This fetchers copies a plain directory (i.e. not a Git/Mercurial
repository) to the store (or does nothing if the path is already a
store path).
One use case is to pin the 'nixpkgs' flake used to build the current
NixOS system, and prevent it from being garbage-collected, via a
system registry entry like this:
{
"from": {
"id": "nixpkgs",
"type": "indirect"
},
"to": {
"type": "path",
"path": "/nix/store/rralhl3wj4rdwzjn16g7d93mibvlr521-source",
"lastModified": 1585388205,
"rev": "b0c285807d6a9f1b7562ec417c24fa1a30ecc31a"
},
"exact": true
}
Note the fake "lastModified" and "rev" attributes that ensure that the
flake gives the same evaluation results as the corresponding
Git/GitHub inputs.
This allows querying the location of function arguments. E.g.
builtins.unsafeGetAttrPos "x" (builtins.functionArgs ({ x }: null))
=> { column = 57; file = "/home/infinisil/src/nix/inst/test.nix"; line = 1; }
An example use is for pinning the "nixpkgs" entry the system-wide
registry to a particular store path. Inexact matches
(e.g. "nixpkgs/master") should still use the global registry.
One application for this is pinning the 'nixpkgs' flake to the exact
revision used to build the NixOS system, e.g.
{
"flakes": [
{
"from": {
"id": "nixpkgs",
"type": "indirect"
},
"to": {
"owner": "NixOS",
"repo": "nixpkgs",
"type": "github",
"rev": "b0c285807d6a9f1b7562ec417c24fa1a30ecc31a"
}
}
],
"version": 2
}
Using std::filesystem means also having to link with -lstdc++fs on
some platforms and it's hard to discover for what platforms this is
needed. As all the functionality is already implemented as utilities,
use those instead.
Due to fetchGit not checking if rev is an ancestor of ref (there is even
a FIXME comment about it in the code), the cache repo might not have the
ref even though it has the rev. This doesn't matter when submodule =
false, but the submodule = true code blows up because it tries to fetch
the (missing) ref from the cache repo.
Fix this in the simplest way possible: fetch all refs from the local
cache repo when submodules = true.
TODO: Add tests.
The .link file is used as a lock, so I think we should put the
"submodule" attribute in there since turning on submodules creates a new
.link file path.
This is now done in a single pass. Also fixes some issues when
updating flakes with circular dependencies. Finally, when using
'--recreate-lock-file --commit-lock-file', the commit message now
correctly shows the differences.
Sadly 10.15 changed /bin/sh to a shim which executes bash, this means it
can't be used anymore without also opening up the sandbox to allow bash.
Failed to exec /bin/bash as variant for /bin/sh (1: Operation not permitted).
This is used to determine the dependency tree of impure libraries so nix
knows what paths to open in the sandbox. With the less restrictive
defaults it isn't needed anymore.
Running `nix-store --gc --delete` will, as of Nix 2.3.3, simply fail
because the --delete option conflicts with the --delete operation.
$ nix-store --gc --delete
error: only one operation may be specified
Try 'nix-store --help' for more information.
Furthermore, it has been broken since at least Nix 0.16 (which was
released sometime in 2010), which means that any scripts which depend
on it should have been broken at least nine years ago. This commit
simply formally removes the option. There should be no actual difference
in behaviour as far as the user is concerned: it errors with the exact
same error message. The manual has been edited to remove any references
to the (now gone) --delete option.
Other information:
* Path for Nix 0.16 used:
/nix/store/rp3sgmskn0p0pj1ia2qwd5al6f6pinz4-nix-0.16
See documentattion in header and comments in implementation for details.
This is actually done in preparation for floating ca derivations, not
multi-output fixed ca derivations, but the distinction doesn't yet
mattter.
Thanks @cole-h for finding and fixing a bunch of typos.
If you do a fetchTree on a Git repository, whether the result contains
a revCount attribute should not depend on whether that repository
happens to be a shallow clone or not. That would complicate caching a
lot and would be semantically messy. So applying fetchTree/fetchGit to
a shallow repository is now an error unless you pass the attribute
'shallow = true'. If 'shallow = true', we don't return revCount, even
if the repository is not actually shallow.
Note that Nix itself is not doing shallow clones at the moment. But it
could do so as an optimisation if the user specifies 'shallow = true'.
Issue #2988.
Today's fixed output derivations and regular derivations differ in a few
ways which are largely orthogonal. This replaces `isFixedOutput` with a
`type` that returns an enum of possible combinations.
In
nix-instantiate --dry-run '<nixpkgs/nixos/release-combined.nix>' -A nixos.tests.simple.x86_64-linux
this reduces time spent in unparse() from 9.15% to 4.31%. The main
culprit was appending characters one at a time to the destination
string. Even though the string has enough capacity, push_back() still
needs to check this on every call.
Note: like 'nix run', and unlike 'nix-shell', this takes an argv
vector rather than a shell command. So
nix dev-shell -c 'echo $PATH'
doesn't work. Instead you need to do
nix dev-shell -c bash -c 'echo $PATH'
The problem fixed: each nix-shell invocation creates a new temporary
directory (`/tmp/nix-shell-*`) and never cleans up.
And while I'm here, shellescape all variables inlined into the rcfile.
See what might happen without escaping:
$ export TZ="';echo pwned'"
$ nix-shell -p hello --run hello
pwned
Hello, world!
Worktrees[1] are a feature of git which allow you to check out a ref in
a different directory.
While playing around with flakes I realized that git repositories in a
worktree checkout break when trying to build a flake:
```
$ git worktree add ../nixpkgs-flakes nixpkgs-flakes
$ cd ../nixpkgs-flakes
$ nix build .#hello
error: opening directory '/home/ma27/Projects/nixpkgs-flakes/.git/refs/heads': Not a directory
```
This issue has been fixed by determining with `git rev-parse --git-common-dir`
where the actual `.git` directory is.
Please note that this issue only exists on the `flakes` branch, fetching
worktree checkouts with Nix master seems to work fine.
[1] https://git-scm.com/docs/git-worktree
The ssh client is lazily started by the first worker thread, that
requires a ssh connection. To avoid the ssh client to be killed, when
the worker process is stopped, do not set PR_SET_PDEATHSIG.
This allows all supported fetchers to be used, e.g.
builtins.fetchTree {
type = "github";
owner = "NixOS";
repo = "nix";
rev = "d4df99a3349cf2228a8ee78dea320afef86eb3ba";
}
Brings the functionality of ssh-ng:// in sync with the legacy ssh://
implementation. Specifying the remote store uri enables various useful
things. eg.
$ nix copy --to ssh-ng://cache?remote-store=file://mnt/cache --all
