While trying to use an alternate directory for my Nix installation, I
noticed that nix's output didn't reflect the updated state
directory. This patch corrects that and now prints the warning before
attempting to create the directory (if the directory creation fails,
it wouldn't have been obvious why nix was attempting to create the
directory in the first place).
With this patch, I now get the following warning:
warning: '/home/deck/.var/app/org.nixos.nix/var/nix' does not
exist, so Nix will use '/home/deck/.local/share/nix/root' as a
chroot store
These settings seem harmless, they control the same polling
functionality that timeout does, but with different behavior. Should
be safe for untrusted users to pass in.
I just had a colleague get confused by the previous phrase for good
reason. "valid" sounds like an *objective* criterion, e.g. and *invalid
signature* would be one that would be trusted by no one, e.g. because it
misformatted or something.
What is actually going is that there might be a signature which is
perfectly valid to *someone else*, but not to the user, because they
don't trust the corresponding public key. This is a *subjective*
criterion, because it depends on the arbitrary and personal choice of
which public keys to trust.
I therefore think "trustworthy" is a better adjective to use. Whether
something is worthy of trust is clearly subjective, and then "trust"
within that word nicely evokes `trusted-public-keys` and friends.
- call close explicitly in writeFile to prevent the close exception
from being ignored
- fsync after writing schema file to flush data to disk
- fsync schema file parent to flush metadata to disk
https://github.com/NixOS/nix/issues/7064
Remove the `verify TLS: Nix CA file = 'blah'` message that Nix used to print when fetching anything as it's both useless (`libcurl` prints the same info in its logs) and misleading (gives the impression that a new TLS connection is being established which might not be the case because of multiplexing. See #7011 )
Implements the approach suggested by feedback on PR #6994, where
tempdir paths are created in the store (now with an exclusive lock).
As part of this work, the currently-broken and unused
`createTempDirInStore` function is updated to create an exclusive lock
on the temp directory in the store.
The GC now makes a non-blocking attempt to lock any store directories
that "look like" the temp directories created by this function, and if
it can't acquire one, ignores the directory.
readDerivation is pretty slow, and while it may not be significant for
some use cases, on things like ghc-nix where we have thousands of
derivations is really slows things down.
So, this just doesn’t do the impure derivation check if the impure
derivation experimental feature is disabled. Perhaps we could cache
the result of isPure() and keep the check, but this is a quick fix to
for the slowdown introduced with impure derivations features in 2.8.0.
This hang for some reason didn't trigger in the Nix build, but did
running 'make installcheck' interactively. What happened:
* Store::addMultipleToStore() calls a SinkToSource object to copy a
path, which in turn calls LegacySSHStore::narFromPath(), which
acquires a connection.
* The SinkToSource object is not destroyed after the last bytes has
been read, so the coroutine's stack is still alive and its
destructors are not run. So the connection is not released.
* Then when the next path is copied, because max-connections = 1,
LegacySSHStore::narFromPath() hangs forever waiting for a connection
to be released.
The fix is to make sure that the source object is destroyed when we're
done with it.
RewritingSink can handle being fed input where a reference crosses a
chunk boundary. we don't need to load the whole source into memory, and
in fact *not* loading the whole source lets nix build FODs that do not
fit into memory (eg fetchurl'ing data files larger than system memory).
Once a derivation goal has been completed, we check whether or not
this goal was meant to be repeated to check its output.
An early return branch was preventing the worker to reach that repeat
code branch, hence breaking the --check command (#2619).
It seems like this early return branch is an artifact of a passed
refactoring. As far as I can tell, buildDone's main branch also
cleanup the tmp directory before returning.
By default, Nix sets the "cores" setting to the number of CPUs which are
physically present on the machine. If cgroups are used to limit the CPU
and memory consumption of a large Nix build, the OOM killer may be
invoked.
For example, consider a GitLab CI pipeline which builds a large software
package. The GitLab runner spawns a container whose CPU is limited to 4
cores and whose memory is limited to 16 GiB. If the underlying machine
has 64 cores, Nix will invoke the build with -j64. In many cases, that
level of parallelism will invoke the OOM killer and the build will
completely fail.
This change sets the default value of "cores" to be
ceil(cpu_quota / cpu_period), with a fallback to
std:🧵:hardware_concurrency() if cgroups v2 is not detected.
The workaround for "Some distros patch Linux" mentioned in
local-derivation-goal.cc will not help in the `--option
sandbox-fallback false` case. To provide the user more helpful
guidance on how to get the sandbox working, let's check to see if the
`/proc` node created by the aforementioned patch is present and
configured in a way that will cause us problems. If so, give the user
a suggestion for how to troubleshoot the problem.
local-derivation-goal.cc contains a comment stating that "Some distros
patch Linux to not allow unprivileged user namespaces." Let's give a
pointer to a common version of this patch for those who want more
details about this failure mode.
This commit causes nix to `warn()` if sandbox setup has failed and
`/proc/self/ns/user` does not exist. This is usually a sign that the
kernel was compiled without `CONFIG_USER_NS=y`, which is required for
sandboxing.
This commit uses `warn()` to notify the user if sandbox setup fails
with errno==EPERM and /proc/sys/user/max_user_namespaces is missing or
zero, since that is at least part of the reason why sandbox setup
failed.
Note that `echo -n 0 > /proc/sys/user/max_user_namespaces` or
equivalent at boot time has been the recommended mitigation for
several Linux LPE vulnerabilities over the past few years. Many users
have applied this mitigation and then forgotten that they have done
so.
The failure modes for nix's sandboxing setup are pretty complicated.
When nix is unable to set up the sandbox, let's provide more detail
about what went wrong. Specifically:
* Make sure the error message includes the word "sandbox" so the user
knows that the failure was related to sandboxing.
* If `--option sandbox-fallback false` was provided, and removing it
would have allowed further attempts to make progress, let the user
know.
Specifically, if we're not root and the daemon socket does not exist,
then we use ~/.local/share/nix/root as a chroot store. This enables
non-root users to download nix-static and have it work out of the box,
e.g.
ubuntu@ip-10-13-1-146:~$ ~/nix run nixpkgs#hello
warning: '/nix' does not exists, so Nix will use '/home/ubuntu/.local/share/nix/root' as a chroot store
Hello, world!
With this, Nix will write a copy of the sandbox shell to /bin/sh in
the sandbox rather than bind-mounting it from the host filesystem.
This makes /bin/sh work out of the box with nix-static, i.e. you no
longer get
/nix/store/qa36xhc5gpf42l3z1a8m1lysi40l9p7s-bootstrap-stage4-stdenv-linux/setup: ./configure: /bin/sh: bad interpreter: No such file or directory
This allows changes to nix-cache-info to be picked up by existing
clients. Previously, the only way for this to happen would be for
clients to delete binary-cache-v6.sqlite, which is quite awkward for
users.
On the other hand, updates to nix-cache-info should be pretty rare,
hence the choice of a fairly long TTL. Configurability is probably not
useful enough to warrant implementing it.
The manpage for `getgrouplist` says:
> If the number of groups of which user is a member is less than or
> equal to *ngroups, then the value *ngroups is returned.
>
> If the user is a member of more than *ngroups groups, then
> getgrouplist() returns -1. In this case, the value returned in
> *ngroups can be used to resize the buffer passed to a further
> call getgrouplist().
In our original code, however, we allocated a list of size `10` and, if
`getgrouplist` returned `-1` threw an exception. In practice, this
caused the code to fail for any user belonging to more than 10 groups.
While unusual for single-user systems, large companies commonly have a
huge number of POSIX groups users belong to, causing this issue to crop
up and make multi-user Nix unusable in such settings.
The fix is relatively simple, when `getgrouplist` fails, it stores the
real number of GIDs in `ngroups`, so we must resize our list and retry.
Only then, if it errors once more, we can raise an exception.
This should be backported to, at least, 2.9.x.
Bring back the possibility to copy CA paths with no reference (like the
outputs of FO derivations or stuff imported at eval time) between stores
that have a different prefix.
A mips64el Linux MIPS kernel can execute userspace code using any of
three ABIs:
mips64el-linux-*abin64
mips64el-linux-*abin32
mipsel-linux-*
The first of these is the native 64-bit ABI, and the only ABI with
64-bit pointers; this is sometimes called "n64". The last of these is
the old legacy 32-bit ABI, whose binaries can execute natively on
32-bit MIPS hardware; this is sometimes called "o32".
The second ABI, "n32" is essentially the 64-bit ABI with 32-bit
pointers and address space. Hardware 64-bit integer/floating
arithmetic is still allowed, as well as the much larger mips64
register set and more-efficient calling convention.
Let's enable seccomp filters for all of these. Likewise for big
endian (mips64-linux-*).
Without the change any CA deletion triggers linear scan on large
RealisationsRefs table:
sqlite>.eqp full
sqlite> delete from RealisationsRefs where realisationReference IN ( select id from Realisations where outputPath = 1234567890 );
QUERY PLAN
|--SCAN RealisationsRefs
`--LIST SUBQUERY 1
`--SEARCH Realisations USING COVERING INDEX IndexRealisationsRefsOnOutputPath (outputPath=?)
With the change it gets turned into a lookup:
sqlite> CREATE INDEX IndexRealisationsRefsRealisationReference on RealisationsRefs(realisationReference);
sqlite> delete from RealisationsRefs where realisationReference IN ( select id from Realisations where outputPath = 1234567890 );
QUERY PLAN
|--SEARCH RealisationsRefs USING INDEX IndexRealisationsRefsRealisationReference (realisationReference=?)
`--LIST SUBQUERY 1
`--SEARCH Realisations USING COVERING INDEX IndexRealisationsRefsOnOutputPath (outputPath=?)
If the derivation `foo` depends on `bar`, and they both have the same
output path (because they are CA derivations), then this output path
will depend both on the realisation of `foo` and of `bar`, which
themselves depend on each other.
This confuses SQLite which isn’t able to automatically solve this
diamond dependency scheme.
Help it by adding a trigger to delete all the references between the
relevant realisations.
Fix#5320
Otherwise the clang builds fail because the constructor of `SQLiteBusy`
inherits it, `SQLiteError::_throw` tries to call it, which fails.
Strangely, gcc works fine with it. Not sure what the correct behavior is
and who is buggy here, but either way, making it public is at the worst
a reasonable workaround
This ensures that use-sites properly trigger new monomorphisations on
one hand, and on the other hand keeps the main `sqlite.hh` clean and
interface-only. I think that is good practice in general, but in this
situation in particular we do indeed have `sqlite.hh` users that don't
need the `throw_` function.
Previously it only logged the builder's path, this changes it to log the
arguments at the same log level, and the environment variables at the
vomit level.
This helped me debug https://github.com/svanderburg/node2nix/issues/75
This was caused by SubstitutionGoal not setting the errorMsg field in
its BuildResult. We now get a more descriptive message than in 2.7.0, e.g.
error: path '/nix/store/13mh...' is required, but there is no substituter that can build it
instead of the misleading (since there was no build)
error: build of '/nix/store/13mh...' failed
Fixes#6295.
Impure derivations are derivations that can produce a different result
every time they're built. Example:
stdenv.mkDerivation {
name = "impure";
__impure = true; # marks this derivation as impure
outputHashAlgo = "sha256";
outputHashMode = "recursive";
buildCommand = "date > $out";
};
Some important characteristics:
* This requires the 'impure-derivations' experimental feature.
* Impure derivations are not "cached". Thus, running "nix-build" on
the example above multiple times will cause a rebuild every time.
* They are implemented similar to CA derivations, i.e. the output is
moved to a content-addressed path in the store. The difference is
that we don't register a realisation in the Nix database.
* Pure derivations are not allowed to depend on impure derivations. In
the future fixed-output derivations will be allowed to depend on
impure derivations, thus forming an "impurity barrier" in the
dependency graph.
* When sandboxing is enabled, impure derivations can access the
network in the same way as fixed-output derivations. In relaxed
sandboxing mode, they can access the local filesystem.
Rather than having four different but very similar types of hashes, make
only one, with a tag indicating whether it corresponds to a regular of
deferred derivation.
This implies a slight logical change: The original Nix+multiple-outputs
model assumed only one hash-modulo per derivation. Adding
multiple-outputs CA derivations changed this as these have one
hash-modulo per output. This change is now treating each derivation as
having one hash modulo per output.
This obviously means that we internally loose the guaranty that
all the outputs of input-addressed derivations have the same hash
modulo. But it turns out that it doesn’t matter because there’s nothing
in the code taking advantage of that fact (and it probably shouldn’t
anyways).
The upside is that it is now much easier to work with these hashes, and
we can get rid of a lot of useless `std::visit{ overloaded`.
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems>
This avoids an infinite loop in the final test in
tests/binary-cache.sh. I think this was only not triggered previously
by accident (because we were clearing wantedOutputs in between).
LocalStore::addToStore() since
79ae9e4558 expects a regular NAR hash,
rather than a NAR hash modulo self-references. Fixes#6300.
Also, makeContentAddressed() now rewrites the entire closure (so 'nix
store make-content-addressable' no longer needs '-r'). See #6301.
1. `DerivationOutput` now as the `std::variant` as a base class. And the
variants are given hierarchical names under `DerivationOutput`.
In 8e0d0689be @matthewbauer and I
didn't know a better idiom, and so we made it a field. But this sort
of "newtype" is anoying for literals downstream.
Since then we leaned the base class, inherit the constructors trick,
e.g. used in `DerivedPath`. Switching to use that makes this more
ergonomic, and consistent.
2. `store-api.hh` and `derivations.hh` are now independent.
In bcde5456cc I swapped the dependency,
but I now know it is better to just keep on using incomplete types as
much as possible for faster compilation and good separation of
concerns.
Before the change garbage collector was not considering
`.drv` and outputs as alive even if configuration says otherwise.
As a result `nix store gc --dry-run` could visit (and parse)
`.drv` files multiple times (worst case it's quadratic).
It happens because `alive` set was populating only runtime closure
without regard for actual configuration. The change fixes it.
Benchmark: my system has about 139MB, 40K `.drv` files.
Performance before the change:
$ time nix store gc --dry-run
real 4m22,148s
Performance after the change:
$ time nix store gc --dry-run
real 0m14,178s
Don’t try and assume that we know the output paths when we’ve just built
with `--dry-run`. Instead make `--dry-run` follow a different code path
that won’t assume the knowledge of the output paths at all.
Fix#6275
Before the change on a system with `auto-optimise-store = true`:
$ nix store gc --verbose --max 1
deleted all the paths instead of one path (we requested 1 byte limit).
It happens because every file in `auto-optimise-store = true` has at
least 2 links: file itself and a link in /nix/store/.links/ directory.
The change conservatively assumes that any file that has one (as before)
or two links (assume auto-potimise mode) will free space.
Co-authored-by: Sandro <sandro.jaeckel@gmail.com>
This changes was taken from dynamic derivation (#4628). It` somewhat
undoes the refactors I first did for floating CA derivations, as the
benefit of hindsight + requirements of dynamic derivations made me
reconsider some things.
They aren't to consequential, but I figured they might be good to land
first, before the more profound changes @thufschmitt has in the works.
Continue progress on #5729.
Just as I hoped, this uncovered an issue: the daemon protocol is missing
a way to query build logs. This doesn't effect `unix://`, but does
effect `ssh://`. A FIXME is left for this, so we come back to it later.
This function is like buildPaths(), except that it returns a vector of
BuildResults containing the exact statuses and output paths of each
derivation / substitution. This is convenient for functions like
Installable::build(), because they then don't need to do another
series of calls to get the outputs of CA derivations. It's also a
precondition to impure derivations, where we *can't* query the output
of those derivations since they're not stored in the Nix database.
Note that PathSubstitutionGoal can now also return a BuildStatus.
Starts progress on #5729.
The idea is that we should not have these default methods throwing
"unimplemented". This is a small step in that direction.
I kept `addTempRoot` because it is a no-op, rather than failure. Also,
as a practical matter, it is called all over the place, while doing
other tasks, so the downcasting would be annoying.
Maybe in the future I could move the "real" `addTempRoot` to `GcStore`,
and the existing usecases use a `tryAddTempRoot` wrapper to downcast or
do nothing, but I wasn't sure whether that was a good idea so with a
bias to less churn I didn't do it yet.
Setting the `_NIX_FORCE_HTTP` environment variable is supposed to force `file://` store urls to use the `HttpBinaryCacheStore` implementation rather than the `LocalBinaryCacheStore` one (very useful for testing).
However because of a name mismatch, the `LocalBinaryCacheStore` was still registering the `file` scheme when this variable was set, meaning that the actual store implementation picked up on `file://` uris was dependent on the registration order of the stores (itself dependent on the link order of the object files).
Fix this by making the `LocalBinaryCacheStore` gracefully not register the `file` uri scheme when the variable is set.
Starting work on #5638
The exact boundary between `FetchSettings` and `EvalSettings` is not
clear to me, but that's fine. First lets clean out `libstore`, and then
worry about what, if anything, should be the separation between those
two.
To avoid that JSON messages are parsed twice in case of
remote builds with `ssh-ng://`, I split up the original
`handleJSONLogMessage` into three parts:
* `parseJSONMessage(const std::string&)` checks if it's a message in the
form of `@nix {...}` and tries to parse it (and prints an error if the
parsing fails).
* `handleJSONLogMessage(nlohmann::json&, ...)` reads the fields from the
message and passes them to the logger.
* `handleJSONLogMessage(const std::string&, ...)` behaves as before, but
uses the two functions mentioned above as implementation.
In case of `ssh-ng://`-logs the first two methods are invoked manually.
Right now when building a derivation remotely via
$ nix build -j0 -f . hello -L --builders 'ssh://builder'
it's possible later to read through the entire build-log by running
`nix log -f . hello`. This isn't possible however when using `ssh-ng`
rather than `ssh`.
The reason for that is that there are two different ways to transfer
logs in Nix through e.g. an SSH tunnel (that are used by `ssh`/`ssh-ng`
respectively):
* `ssh://` receives its logs from the fd pointing to `builderOut`. This
is directly passed to the "log-sink" (and to the logger on each `\n`),
hence `nix log` works here.
* `ssh-ng://` however expects JSON-like messages (i.e. `@nix {log data
in here}`) and passes it directly to the logger without doing anything
with the `logSink`. However it's certainly possible to extract
log-lines from this format as these have their own message-type in the
JSON payload (i.e. `resBuildLogLine`).
This is basically what I changed in this patch: if the code-path for
`builderOut` is not reached and a `logSink` is initialized, the
message was successfully processed by the JSON logger (i.e. it's in
the expected format) and the line is of the expected type (i.e.
`resBuildLogLine`), the line will be written to the log-sink as well.
Closes#5079
If we want to be careful about hitting the stack protector page, we should use `-fstack-check` instead.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
This was removed in 2e199673a5 when
`copyPath` transitioned to use `RealisedPath`. But then in
e9848beca7 we added it back just for
`realisedPath`.
I think it is a good utility function --- one can easily imagine it
becoming optimized in the future, and copying paths *violating* the
closure is a very niche feature.
So if we have `copyPaths` for both sorts of paths, I think we should
have `copyClosure` for both sorts too.
This removes a dynamic stack allocation, making the derivation
unparsing logic robust against overflows when large strings are
added to a derivation.
Overflow behavior depends on the platform and stack configuration.
For instance, x86_64-linux/glibc behaves as (somewhat) expected:
$ (ulimit -s 20000; nix-instantiate tests/lang/eval-okay-big-derivation-attr.nix)
error: stack overflow (possible infinite recursion)
$ (ulimit -s 40000; nix-instantiate tests/lang/eval-okay-big-derivation-attr.nix)
error: expression does not evaluate to a derivation (or a set or list of those)
However, on aarch64-darwin:
$ nix-instantiate big-attr.nix ~
zsh: segmentation fault nix-instantiate big-attr.nix
This indicates a slight flaw in the single stack protection page
approach that is not encountered with normal stack frames.
There already existed a smoke test for the link content length,
but it appears that there exists some corruptions pernicious enough
to replace the file content with zeros, and keeping the same length.
--repair-path now goes as far as checking the content of the link,
making it true to its name and actually repairing the path for such
coruption cases.
