The tarball can now be unpacked anywhere. The installation script
uses "sudo" to create /nix if it doesn't exist. It also fetches the
nixpkgs-unstable channel.
NAR info files in binary caches can now have a cryptographic signature
that Nix will verify before using the corresponding NAR file.
To create a private/public key pair for signing and verifying a binary
cache, do:
$ openssl genrsa -out ./cache-key.sec 2048
$ openssl rsa -in ./cache-key.sec -pubout > ./cache-key.pub
You should also come up with a symbolic name for the key, such as
"cache.example.org-1". This will be used by clients to look up the
public key. (It's a good idea to number keys, in case you ever need
to revoke/replace one.)
To create a binary cache signed with the private key:
$ nix-push --dest /path/to/binary-cache --key ./cache-key.sec --key-name cache.example.org-1
The public key (cache-key.pub) should be distributed to the clients.
They should have a nix.conf should contain something like:
signed-binary-caches = *
binary-cache-public-key-cache.example.org-1 = /path/to/cache-key.pub
If all works well, then if Nix fetches something from the signed
binary cache, you will see a message like:
*** Downloading ‘http://cache.example.org/nar/7dppcj5sc1nda7l54rjc0g5l1hamj09j-subversion-1.7.11’ (signed by ‘cache.example.org-1’) to ‘/nix/store/7dppcj5sc1nda7l54rjc0g5l1hamj09j-subversion-1.7.11’...
On the other hand, if the signature is wrong, you get a message like
NAR info file `http://cache.example.org/7dppcj5sc1nda7l54rjc0g5l1hamj09j.narinfo' has an invalid signature; ignoring
Signatures are implemented as a single line appended to the NAR info
file, which looks like this:
Signature: 1;cache.example.org-1;HQ9Xzyanq9iV...muQ==
Thus the signature has 3 fields: a version (currently "1"), the ID of
key, and the base64-encoded signature of the SHA-256 hash of the
contents of the NAR info file up to but not including the Signature
line.
Issue #75.
This reverts commit 194e3374b8.
Checking the command line for GC roots means that
$ nix-store --delete $path
will fail because $path is now a root because it's mentioned on the
command line.
Ever since SQLite in Nixpkgs was updated to 3.8.0.2, Nix has randomly
segfaulted on Darwin:
http://hydra.nixos.org/build/6175515http://hydra.nixos.org/build/6611038
It turns out that this is because the binary cache substituter somehow
ends up loading two versions of SQLite: the one in Nixpkgs and the
other from /usr/lib/libsqlite3.dylib. It's not exactly clear why the
latter is loaded, but it appears to be because WWW::Curl indirectly loads
/System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation,
which in turn seems to load /usr/lib/libsqlite3.dylib. This leads to
a segfault when Perl exits:
#0 0x00000001010375f4 in sqlite3_finalize ()
#1 0x000000010125806e in sqlite_st_destroy ()
#2 0x000000010124bc30 in XS_DBD__SQLite__st_DESTROY ()
#3 0x00000001001c8155 in XS_DBI_dispatch ()
...
#14 0x0000000100023224 in perl_destruct ()
#15 0x0000000100000d6a in main ()
...
The workaround is to explicitly load DBD::SQLite before WWW::Curl.
nix-shell with the --command flag might be used non-interactively, but
if bash starts non-interactively (i.e. with stdin or stderr not a
terminal), it won't source the script given in --rcfile. However, in
that case it *will* source the script found in $BASH_ENV, so we can use
that instead.
Also, don't source ~/.bashrc in a non-interactive shell (detectable by
checking the PS1 env var)
Signed-off-by: Shea Levy <shea@shealevy.com>
Nixpkgs's stdenv setup script sets the "nullglob" option, but doing so
breaks Bash completion on NixOS (when ‘programs.bash.enableCompletion’
is set) and on Ubuntu. So clear that flag afterwards. Of course,
this may break stdenv functions in subtle ways...
Nixpkgs' stdenv disables dependency tracking by default. That makes
sense for one-time builds, but in an interactive environment we expect
repeated "make" invocations to do the right thing.
This reverts commit 69b8f9980f.
The timeout should be enforced remotely. Otherwise, if the garbage
collector is running either locally or remotely, if will block the
build or closure copying for some time. If the garbage collector
takes too long, the build may time out, which is not what we want.
Also, on heavily loaded systems, copying large paths to and from the
remote machine can take a long time, also potentially resulting in a
timeout.
For instance, it's pointless to keep copy-from-other-stores running if
there are no other stores, or download-using-manifests if there are no
manifests. This also speeds things up because we don't send queries
to those substituters.
Previously, if a binary cache is hanging/unreachable/slow,
download-from-binary-cache.pl would also hang without any indication
to the user. Now, if fetching a URL takes more than 5 seconds, it
will print a message to that effect.
Amazon S3 returns HTTP status code 403 if a file doesn't exist and the
user has no permission to list the contents of the bucket. So treat
it as 404 (meaning it's cached in the NARExistence table).
The "$UID != 0" makes no sense: if the local side has write access to
the Nix store (which is always the case) then it doesn't matter if
we're root - we can import unsigned paths either way.
Otherwise it will set the parent's stdin to non-blocking mode, causing
the subsequent read of the set of inputs/outputs to fail randomly.
That's insane.
Before selecting a machine, build-remote.pl will try to run the
command "nix-builds-inhibited" on the machine. If this command exists
and returns a 0 exit code, then the machine won't be used. It's up to
the user to provide this command, but it would typically be a script
that checks whether there is enough disk space and whether the load is
not too high.
Don't pass --timeout / --max-silent-time to the remote builder.
Instead, let the local Nix process terminate the build if it exceeds a
timeout. The remote builder will be killed as a side-effect. This
gives better error reporting (since the timeout message from the
remote side wasn't properly propagated) and handles non-Nix problems
like SSH hangs.
This allows providing additional binary caches, useful in scripts like
Hydra's build reproduction scripts, in particular because untrusted
caches are ignored.
This should make live easier for single-user (non-daemon)
installations. Note that when the daemon is used, the "calling user"
is root so we're not using any untrusted caches.
For example, given a derivation with outputs "out", "man" and "bin":
$ nix-build -A pkg
produces ./result pointing to the "out" output;
$ nix-build -A pkg.man
produces ./result-man pointing to the "man" output;
$ nix-build -A pkg.all
produces ./result, ./result-man and ./result-bin;
$ nix-build -A pkg.all -A pkg2
produces ./result, ./result-man, ./result-bin and ./result-2.
Binary caches can now specify a priority in their nix-cache-info file.
The binary cache substituter checks caches in order of priority. This
is to ensure that fast, static caches like nixos.org/binary-cache are
processed before slow, dynamic caches like hydra.nixos.org.
This allows disabling the use of binary caches, e.g.
$ nix-build ... --option use-binary-caches false
Note that
$ nix-build ... --option binary-caches ''
does not disable all binary caches, since the caches defined by
channels will still be used.
If ‘--link’ is given, nix-push will create hard links to the NAR files
in the store, rather than copying them. This is faster and requires
less disk space. However, it doesn't work if the store is on a
different file system.
I.e. do what git does. I'm too lazy to keep the builtin help text up
to date :-)
Also add ‘--help’ to various commands that lacked it
(e.g. nix-collect-garbage).
This operation allows fixing corrupted or accidentally deleted store
paths by redownloading them using substituters, if available.
Since the corrupted path cannot be replaced atomically, there is a
very small time window (one system call) during which neither the old
(corrupted) nor the new (repaired) contents are available. So
repairing should be used with some care on critical packages like
Glibc.
Commit 6a214f3e06 copied most of the Nix
shell initialisation code from NixOS to nix-profile.sh; however, that
code assumes a multi-user install and is Linux-specific (e.g. it calls
the "stat" command). So go back to the simple single-user version.
Fixes#49.
Negative lookups are purged from the DB after a day, at most once per
day. However, for non-"have" lookups (e.g. all except "nix-env
-qas"), negative lookups are ignored after one hour. This is to
ensure that you don't have to wait a day for an operation like
"nix-env -i" to start using new binaries in the cache.
Should probably make this configurable.
Note that this will only work if the client has a very recent Nix
version (post 15e1b2c223), otherwise the
--option flag will just be ignored.
Fixes#50.
This handles the chroot and build hook cases, which are easy.
Supporting the non-chroot-build case will require more work (hash
rewriting!).
Issue #21.
Output names are now appended to resulting GC symlinks, e.g. by
nix-build. For backwards compatibility, if the output is named "out",
nothing is appended. E.g. doing "nix-build -A foo" on a derivation
that produces outputs "out", "bin" and "dev" will produce symlinks
"./result", "./result-bin" and "./result-dev", respectively.
Channels can now advertise a binary cache by creating a file
<channel-url>/binary-cache-url. The channel unpacker puts these in
its "binary-caches" subdirectory. Thus, the URLS of the binary caches
for the channels added by root appear in
/nix/var/nix/profiles/per-user/eelco/channels/binary-caches/*. The
binary cache substituter reads these and adds them to the list of
binary caches.
The .nixpkg file format is extended to optionally include the URL of a
binary cache, which will be used in preference to the manifest URL
(which can be set to a non-existent value).
Querying all substitutable paths via "nix-env -qas" is potentially
hard on a server, since it involves sending thousands of HEAD
requests. So a binary cache must now have a meta-info file named
"nix-cache-info" that specifies whether the server wants this. It
also specifies the store prefix so that we don't send useless queries
to a binary cache for a different store prefix.
Since SubstitutionGoal::finished() in build.cc computes the hash
anyway, we can prevent the inefficiency of computing the hash twice by
letting the substituter tell Nix about the expected hash, which can
then verify it.
Commit 6a214f3e06 reused the NixOS
environment initialisation for nix-profile.sh, but this is
inappropriate on systems that don't have multi-user support enabled.
In "nix-env -qas", we don't need the substitute info, we just need to
know if it exists. This can be done using a HTTP HEAD request, which
saves bandwidth.
Note however that curl currently has a bug that prevents it from
reusing HTTP connections if HEAD requests return a 404:
https://sourceforge.net/tracker/?func=detail&aid=3542731&group_id=976&atid=100976
Without the patch attached to the issue, using HEAD is actually quite
a bit slower than GET.
Getting substitute information using the binary cache substituter has
non-trivial latency overhead. A package or NixOS system configuration
can have hundreds of dependencies, and in the worst case (when the
local info cache is empty) we have to do a separate HTTP request for
each of these. If the ping time to the server is t, getting N info
files will take tN seconds; e.g., with a ping time of 0.1s to
nixos.org, sequentially downloading 1000 info files (a typical NixOS
config) will take at least 100 seconds.
To fix this problem, the binary cache substituter can now perform
requests in parallel. This required changing the substituter
interface to support a function querySubstitutablePathInfos() that
queries multiple paths at the same time, and rewriting queryMissing()
to take advantage of parallelism. (Due to local caching,
parallelising queryMissing() is sufficient for most use cases, since
it's almost always called before building a derivation and thus fills
the local info cache.)
For example, parallelism speeds up querying all 1056 paths in a
particular NixOS system configuration from 116s to 2.6s. It works so
well because the eccentricity of the top-level derivation in the
dependency graph is only 9. So we only need 10 round-trips (when
using an unlimited number of parallel connections) to get everything.
Currently we do a maximum of 150 parallel connections to the server.
Thus it's important that the binary cache server (e.g. nixos.org) has
a high connection limit. Alternatively we could use HTTP pipelining,
but WWW::Curl doesn't support it and libcurl has a hard-coded limit of
5 requests per pipeline.
Using WWW::Curl rather than running an external curl process for every
NAR info file halves the time it takes to get info thanks to libcurl's
support for persistent HTTP connections. (We save a roundtrip per
file.) But the real gain will come from using parallel and/or
pipelined requests.
XZ compresses significantly better than bzip2. Here are the
compression ratios and execution times (using 4 cores in parallel) on
my /var/run/current-system (3.1 GiB):
bzip2: total compressed size 849.56 MiB, 30.8% [2m08]
xz -6: total compressed size 641.84 MiB, 23.4% [6m53]
xz -7: total compressed size 621.82 MiB, 22.6% [7m19]
xz -8: total compressed size 599.33 MiB, 21.8% [7m18]
xz -9: total compressed size 588.18 MiB, 21.4% [7m40]
Note that compression takes much longer. More importantly, however,
decompression is much faster:
bzip2: 1m47.274s
xz -6: 0m55.446s
xz -7: 0m54.119s
xz -8: 0m52.388s
xz -9: 0m51.842s
The only downside to using -9 is that decompression takes a fair
amount (~65 MB) of memory.
Manifests are a huge pain, since users need to run nix-pull directly
or indirectly to obtain them. They tend to be large and lag behind
the available binaries; also, the downloaded manifests in
/nix/var/nix/manifest need to be in sync with the Nixpkgs sources. So
we want to get rid of them.
The idea of manifest-free operation works as follows. Nix is
configured with a set of URIs of binary caches, e.g.
http://nixos.org/binary-cache
Whenever Nix needs a store path X, it checks each binary cache for the
existence of a file <CACHE-URI>/<SHA-256 hash of X>.narinfo, e.g.
http://nixos.org/binary-cache/bi1gh9...ia17.narinfo
The .narinfo file contains the necessary information about the store
path that was formerly kept in the manifest, i.e., (relative) URI of
the compressed NAR, references, size, hash, etc. For example:
StorePath: /nix/store/xqp4l88cr9bxv01jinkz861mnc9p7qfi-neon-0.29.6
URL: 1bjxbg52l32wj8ww47sw9f4qz0r8n5vs71l93lcbgk2506v3cpfd.nar.bz2
CompressedHash: sha256:1bjxbg52l32wj8ww47sw9f4qz0r8n5vs71l93lcbgk2506v3cpfd
CompressedSize: 202542
NarHash: sha256:1af26536781e6134ab84201b33408759fc59b36cc5530f57c0663f67b588e15f
NarSize: 700440
References: 043zrsanirjh8nbc5vqpjn93hhrf107f-bash-4.2-p24 cj7a81wsm1ijwwpkks3725661h3263p5-glibc-2.13 ...
Deriver: 4idz1bgi58h3pazxr3akrw4fsr6zrf3r-neon-0.29.6.drv
System: x86_64-linux
Nix then knows that it needs to download
http://nixos.org/binary-cache/1bjxbg52l32wj8ww47sw9f4qz0r8n5vs71l93lcbgk2506v3cpfd.nar.bz2
to substitute the store path.
Note that the store directory is omitted from the References and
Deriver fields to save space, and that the URL can be relative to the
binary cache prefix.
This patch just makes nix-push create binary caches in this format.
The next step is to make a substituter that supports them.
For several platforms we don't currently have "native" Nix packages
(e.g. Mac OS X and FreeBSD). This provides the next best thing: a
tarball containing the closure of Nix, plus a simple script
"nix-finish-install" that initialises the Nix database, registers the
paths in the closure as valid, and runs "nix-env -i /path/to/nix" to
initialise the user profile.
The tarball must be unpacked in the root directory. It creates
/nix/store/... and /usr/bin/nix-finish-install. Typical installation
is as follows:
$ cd /
$ tar xvf /path/to/nix-1.1pre1234_abcdef-x86_64-linux.tar.bz2
$ nix-finish-install
(if necessary add ~/.nix-profile/etc/profile.d/nix.sh to the shell
login scripts)
After this, /usr/bin/nix-finish-install can be deleted, if desired.
The downside to the binary tarball is that it's pretty big (~55 MiB
for x86_64-linux).
Mandatory features are features that MUST be present in a derivation's
requiredSystemFeatures attribute. One application is performance
testing, where we have a dedicated machine to run performance tests
(and nothing else). Then we would add the label "perf" to the
machine's mandatory features and to the performance testing
derivations.
"nix-channel --add" now accepts a second argument: the channel name.
This allows channels to have a nicer name than (say) nixpkgs_unstable.
If no name is given, it defaults to the last component of the URL
(with "-unstable" or "-stable" removed).
Also, channels are now stored in a profile
(/nix/var/nix/profiles/per-user/$USER/channels). One advantage of
this is that it allows rollbacks (e.g. if "nix-channel --update" gives
an undesirable update).
Sometimes when doing "nix-build --run-env" you don't want all
dependencies to be built. For instance, if we want to do "--run-env"
on the "build" attribute in Hydra's release.nix (to get Hydra's build
environment), we don't want its "tarball" dependency to be built. So
we can do:
$ nix-build --run-env release.nix -A build --exclude 'hydra-tarball'
This will skip the dependency whose name matches the "hydra-tarball"
regular expression. The "--exclude" option can be repeated any number
of times.
This command builds or fetches all dependencies of the given
derivation, then starts a shell with the environment variables from
the derivation. This shell also sources $stdenv/setup to initialise
the environment further.
The current directory is not changed. Thus this is a convenient way
to reproduce a build environment in an existing working tree.
Existing environment variables are left untouched (unless the
derivation overrides them). As a special hack, the original value of
$PATH is appended to the $PATH produced by $stdenv/setup.
Example session:
$ nix-build --run-env '<nixpkgs>' -A xterm
(the dependencies of xterm are built/fetched...)
$ tar xf $src
$ ./configure
$ make
$ emacs
(... hack source ...)
$ make
$ ./xterm
directory. Previously in this situation we did add the Nix
expressions from the channel to allow installation from source, but
this doesn't work for binary-only channels and leads to confusing
error messages.
scripts.
* Include the version and architecture in the -I flag so that there is
at least a chance that a Nix binary built for one Perl version will
run on another version.
other simplifications.
* Use <nix/...> to locate the corepkgs. This allows them to be
overriden through $NIX_PATH.
* Use bash's pipefail option in the NAR builder so that we don't need
to create a temporary file.
closure to a given machine at the same time. This prevents the case
where multiple instances try to copy the same missing store path to
the target machine, which is very wasteful.
‘nix-store --export’.
* Add a Perl module that provides the functionality of
‘nix-copy-closure --to’. This is used by build-remote.pl so it no
longer needs to start a separate nix-copy-closure process. Also, it
uses the Perl API to do the export, so it doesn't need to start a
separate nix-store process either. As a result, nix-copy-closure
and build-remote.pl should no longer fail on very large closures due
to an "Argument list too long" error. (Note that having very many
dependencies in a single derivation can still fail because the
environment can become too large. Can't be helped though.)
read the manifest just to check the version and print the number of
paths. This makes nix-pull very fast for the cached cache (speeding
up nixos-rebuild without the ‘--no-pull’ or ‘--fast’ options).
brackets, e.g.
import <nixpkgs/pkgs/lib>
are resolved by looking them up relative to the elements listed in
the search path. This allows us to get rid of hacks like
import "${builtins.getEnv "NIXPKGS_ALL"}/pkgs/lib"
The search path can be specified through the ‘-I’ command-line flag
and through the colon-separated ‘NIX_PATH’ environment variable,
e.g.,
$ nix-build -I /etc/nixos ...
If a file is not found in the search path, an error message is
lazily thrown.
SQLite manifest cache. The DBI AutoCommit feature caused every
process to have an active transaction at all times, which could
indefinitely block processes wanting to update the manifest cache.
* Disable fsync() in the manifest cache because we don't need
integrity (the cache can always be recreated if it gets corrupted).
them into memory. This brings memory use down to (more or less)
O(1). For instance, on my test case, the maximum resident size of
download-using-manifests while filling the DB went from 142 MiB to
11 MiB.
This significantly speeds up the download-using-manifests
substituter, especially if manifests are very large. For instance,
one "nix-build -A geeqie" operation that updated four packages using
binary patches went from 18.5s to 1.6s. It also significantly
reduces memory use.
The cache is kept in /nix/var/nix/manifests/cache.sqlite. It's
updated automatically when manifests are added to or removed from
/nix/var/nix/manifests. It might be interesting to have nix-pull
store manifests directly in the DB, rather than storing them as
separate flat files, but then we would need a command line interface
to delete manifests from the DB.
`+' and `?' in filenames. This is very slow if /nix/store is very
large. (This is a quick hack - a cleaner solution would be to
bypass the shell entirely.)
`nix-store -q --hash' to get the hash of the base path rather than
`nix-hash'. However, only do this for estimating the size of a
download, not for the actual substitution, because sometimes the
contents of store paths are modified (which they shouldn't, of
course).
hook script proper, and the stdout/stderr of the builder. Only the
latter should be saved in /nix/var/log/nix/drvs.
* Allow the verbosity to be set through an option.
* Added a flag --quiet to lower the verbosity level.
it requires a certain feature on the build machine, e.g.
requiredSystemFeatures = [ "kvm" ];
We need this in Hydra to make sure that builds that require KVM
support are forwarded to machines that have KVM support. Probably
this should also be enforced for local builds.
the hook every time we want to ask whether we can run a remote build
(which can be very often), we now reuse a hook process for answering
those queries until it accepts a build. So if there are N
derivations to be built, at most N hooks will be started.
load on the Hydra build farm (where it's unnecessary anyway because
it has a fast connection to the build machines). In any case,
compression can be enabled by using the `-C' option to ssh.
doesn't exist. The Debian packages don't include the manifests
directory, so nix-channel would silently skip doing a nix-pull,
resulting in everything being built from source. Thanks to Juan
Pedro Bolívar Puente.
giving jobs to the first machine until it hits its job limit, then
the second machine and so on. This should improve utilisation of
the Hydra build farm a lot. Also take an optional speed factor
into account to cause fast machines to be preferred over slower
machines with a similar load.
(that is, call the build hook with a certain interval until it
accepts the build).
* build-remote.pl was totally broken: for all system types other than
the local system type, it would send all builds to the *first*
machine of the appropriate type.
sure that it works as expected when you pass it a derivation. That
is, we have to make sure that all build-time dependencies are built,
and that they are all in the input closure (otherwise remote builds
might fail, for example). This is ensured at instantiation time by
adding all derivations and their sources to inputDrvs and inputSrcs.
