* document "Import From Derivation"
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: John Ericson <git@JohnEricson.me>
make the example more realistic, since `headers` is not an output name
used in Nixpkgs
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
derivations are about data transformation, so the term "build" does not
add any information. there was also some feedback that "build task" is
not more helpful than "derivation" if you have no prior experience with
Nix or build systems, while existing associations may be misleading.
Was confused why `make html` didn't work while working on #9032, but
then I realized that after this section was written, the target was
renamed to `manual-html` in 6910f5dcb6.
there is a very confusing warning in the Nixpkgs manual that
mischaracterises `nix-env` behavior, and this example shows what's
really happening.
note that it doesn't use `pkgs.runCommand` or other `pkgs.stdenv`
facilities, as deep down those set `meta.outputsToInstall` to very
particular defaults that do not generally apply to Nix.
We use the same nested map representation we used for goals, again in
order to save space. We might someday want to combine with `inputDrvs`,
by doing `V = bool` instead of `V = std::set<OutputName>`, but we are
not doing that yet for sake of a smaller diff.
The ATerm format for Derivations also needs to be extended, in addition
to the in-memory format. To accomodate this, we added a new basic
versioning scheme, so old versions of Nix will get nice errors. (And
going forward, if the ATerm format changes again the errors will be even
better.)
`parsedStrings`, an internal function used as part of parsing
derivations in A-Term format, used to consume the final `]` but expect
the initial `[` to already be consumed. This made for what looked like
unbalanced brackets at callsites, which was confusing. Now it consumes
both which is hopefully less confusing.
As part of testing, we also created a unit test for the A-Term format for
regular non-experimental derivations too.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Apply suggestions from code review
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
this is a pure reformatting, contents were not changed
one sentence per line makes reviewing diffs and making suggestions much
more convenient. the indentation was an artifat of the DocBook
migration.
Continue with the characterization testing idioms begun in
c70484454f, but this time for unit tests.
Co-authored-by: Andreas Rammhold <andreas@rammhold.de>
In the Nix language, given a drv path, we should be able to construct
another string referencing to one of its output. We can do this today
with `(import drvPath).output`, but this only works for derivations we
already have.
With dynamic derivations, however, that doesn't work well because the
`drvPath` isn't yet built: importing it like would need to trigger IFD,
when the whole point of this feature is to do "dynamic build graph"
without IFD!
Instead, what we want to do is create a placeholder value with the right
string context to refer to the output of the as-yet unbuilt derivation.
A new primop in the language, analogous to `builtins.placeholder` can be
used to create one. This will achieve all the right properties. The
placeholder machinery also will match out the `outPath` attribute for CA
derivations works.
In 60b7121d2c we added that type of
placeholder, and the derived path and string holder changes necessary to
support it. Then in the previous commit we cleaned up the code
(inspiration finally hit me!) to deduplicate the code and expose exactly
what we need. Now, we can wire up the primop trivally!
Part of RFC 92: dynamic derivations (tracking issue #6316)
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
We want to be able to write down `foo.drv^bar.drv^baz`:
`foo.drv^bar.drv` is the dynamic derivation (since it is itself a
derivation output, `bar.drv` from `foo.drv`).
To that end, we create `Single{Derivation,BuiltPath}` types, that are
very similar except instead of having multiple outputs (in a set or
map), they have a single one. This is for everything to the left of the
rightmost `^`.
`NixStringContextElem` has an analogous change, and now can reuse
`SingleDerivedPath` at the top level. In fact, if we ever get rid of
`DrvDeep`, `NixStringContextElem` could be replaced with
`SingleDerivedPath` entirely!
Important note: some JSON formats have changed.
We already can *produce* dynamic derivations, but we can't refer to them
directly. Today, we can merely express building or example at the top
imperatively over time by building `foo.drv^bar.drv`, and then with a
second nix invocation doing `<result-from-first>^baz`, but this is not
declarative. The ethos of Nix of being able to write down the full plan
everything you want to do, and then execute than plan with a single
command, and for that we need the new inductive form of these types.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
When loading a derivation from a JSON, malformed input would trigger
cryptic "assertion failed" errors. Simply replacing calls to `operator []`
with calls to `.at()` was not enough, as this would cause json.execptions
to be printed verbatim.
Display nice error messages instead and give some indication where the
error happened.
*Before:*
```
$ echo 4 | nix derivation add
error: [json.exception.type_error.305] cannot use operator[] with a string argument with number
$ nix derivation show nixpkgs#hello | nix derivation add
Assertion failed: (it != m_value.object->end()), function operator[], file /nix/store/8h9pxgq1776ns6qi5arx08ifgnhmgl22-nlohmann_json-3.11.2/include/nlohmann/json.hpp, line 2135.
$ nix derivation show nixpkgs#hello | jq '.[] | .name = 5' | nix derivation add
error: [json.exception.type_error.302] type must be string, but is object
$ nix derivation show nixpkgs#hello | jq '.[] | .outputs = { out: "/nix/store/8j3f8j-hello" }' | nix derivation add
error: [json.exception.type_error.302] type must be object, but is string
```
*After:*
```
$ echo 4 | nix derivation add
error: Expected JSON of derivation to be of type 'object', but it is of type 'number'
$ nix derivation show nixpkgs#hello | nix derivation add
error: Expected JSON object to contain key 'name' but it doesn't
$ nix derivation show nixpkgs#hello | jq '.[] | .name = 5' | nix derivation add
error: Expected JSON value to be of type 'string' but it is of type 'number'
$ nix derivation show nixpkgs#hello | jq '.[] | .outputs = { out: "/nix/store/8j3f8j-hello" }' | nix derivation add
error:
… while reading key 'outputs'
error: Expected JSON value to be of type 'object' but it is of type 'string'
```
Over the last year or so I've run into several use cases where I need to
parse and/or serialize URLs for use by `builtins.fetchTree` or
`builtins.getFlake`, largely in order to produce _lockfile-like_ files
for lang2nix frameworks or tools which use `nix` internally to drive
builds.
I've gone through the painstaking process of emulating
`nix::FlakeRef::fromAttrs` and `nix::parseFlakeRef` several times with
mixed success; but these are difficult to create and even harder to
maintain if I hope to stay aligned with changes to the real
parser/serializer.
I understand why adding new `builtins` isn't something we want to do
flagrantly. I'm recommending this addition simply because I keep
encountering use cases where I need to parse/serialize these URIs in
`nix` expressions, and I want a reliable solution.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Co-authored-by: John Ericson <git@JohnEricson.me>
* clarify wording on args@ default handling
Most importantly use shorter sentences and emphasize the key point that defaults aren't taken into account
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: John Ericson <git@JohnEricson.me>
this is a how-to guide which should not be in the reference manual.
it also refers to `nix-env`, which should not be the first thing readers
of the reference manual encounter, as it behaves very differently in
spirit from the rest of Nix.
slightly reword the documentation to be more concise and informative.
Grouping our tests should make it easier to understand the intent than
one long poorly-arranged list. It also is convenient for running just
the tests for a specific component when working on that component.
We need at least one test group so this isn't dead code; I decided to
collect the tests for the `ca-derivations` and `dynamic-derivations`
experimental features in groups. Do
```bash
make ca.test-group -jN
```
and
```bash
make dyn-drv.test-group -jN
```
to try running just them.
I originally did this as part of #8397 for being able to just the local
overlay store alone. I am PRing it separately now so we can separate
general infra from new features.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
* Lang now verifies errors and parse output
* Some new miscellaneous tests
* Easy way to update the tests
* Document workflow in manual
* Use `!` not `~` as separater char for sed
It is confusing to use `~` when we are talking about paths and home
directories!
* Test test suite itself (`test/lang-test/infra.sh`)
Additionally, run shellcheck on `tests/lang.sh` to help ensure it is
correct, now that is is more complex.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This is done in roughly the same way builtin functions are documented.
Also auto-link experimental features for primops, subsuming PR #8371.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
- Improved API docs from comment
- Exit codes are for `nix-build`, not just `nix-store --release`
- Make note in tests so the magic numbers are not surprising
Picking up where #8387 left off.
Deleting store info corrected (there is a foot-gun in Nix with
`--delete-generations old`!)
Also a few things are cleaned up based on feedback.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
This is generally a fine practice: Putting implementations in headers
makes them harder to read and slows compilation. Unfortunately it is
necessary for templates, but we can ameliorate that by putting them in a
separate header. Only files which need to instantiate those templates
will need to include the header with the implementation; the rest can
just include the declaration.
This is now documenting in the contributing guide.
Also, it just happens that these polymorphic serializers are the
protocol agnostic ones. (Worker and serve protocol have the same logic
for these container types.) This means by doing this general template
cleanup, we are also getting a head start on better indicating which
code is protocol-specific and which code is shared between protocols.
While this is not actually a notion in the implementation, it is
explicitly described in the thesis and quite important for understanding
how the store works.
Co-authored-by: John Ericson <git@JohnEricson.me>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Introduce what substituters "are" in the configuration option entry.
Remove arbitrary line breaks for easier editing in the future.
Link glossary some more.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: John Ericson <git@JohnEricson.me>
packages and configurations are not really a concept in Nix or the Nix language. the idea of transforming files into other files clearly captures what it's all about, and the new phrasing should make the term "derivation" more obvious both in terms of meaning and origin.
Add support to --list-generations
as another way to say
nix-env --profile /nix/var/nix/profiles/per-user/$USER/channels --list-generations
the way we did for nix-channel --rollback [generation id]
The primop `builtins.replaceStrings` currently always strictly evaluates the
replacement strings, however time and space are wasted for their computation
if the corresponding pattern do not occur in the input string. This commit
makes the evaluation of the replacement strings lazy by deferring their
evaluation to when the corresponding pattern are matched and memoize the result
for efficient retrieval on subsequent matches.
The testcases for replaceStrings was updated to check for lazy evaluation
of the replacements. A note was also added in the release notes to
document the behavior change.
This adds a new configuration option to Nix, `always-allow-substitutes`,
whose effect is simple: it causes the `allowSubstitutes` attribute in
derivations to be ignored, and for substituters to always be used.
This is extremely valuable for users of Nix in CI, where usually
`nix-build-uncached` is used. There, derivations which disallow
substitutes cause headaches as the inputs for building already-cached
derivations need to be fetched to spuriously rebuild some simple text
file.
This option should be a good middle-ground, since it doesn't imply
rebuilding the world, such as the approach I took in
https://github.com/NixOS/nixpkgs/pull/221048
it's more likely for readers to find it right there.
this also slightly rewords examples to make them stand out better.
in the long run there probably needs to be a dedicated section on formal syntax, and better highlighting of examples.
e.g. nix-env -e subversion => nix-env --uninstall subversion
The aim is to make the documentation less cryptic for newcomers and the
long options are more self-documenting.
The change was made with the following script:
<https://github.com/aschmolck/convert-short-nix-opts-to-long-ones>
and sanity checked visually.
This gives some more context and should clarify why it works that way.
Also link it from the section on `NIX_USER_CONF_FILES`.
Co-authored-by: John Ericson <git@JohnEricson.me>
`/etc/bash.bashrc` is backed up as `/etc/bash.bashrc.backup-before-nix`,
but since other changes might have been introduced in the meantime we can't
just tell the user to revert.
add anchor to `builtins.derivation` and list some built-in functions that are
exposed in the global scope.
I decided not to list everything, because we probably don't want to
encourage people using them that way.
it's probably better not to show the manifest file documentation in the
command-specific pages, because these are implementation details that are not really practically useful.
this means no additional hassle for building the manual, but clutters
the table of contents a bit.
placed in a subsection of the binary install, the instructions are hard
to find. putting them in a separate page that is shown in the table of
contents should make it easier for users to find what they need when
they need it.
- Create a glossary entry for experimental features.
- Have the man page experimental feature notice link `nix-commmand`.
(Eventually this should be programmed, based on whether the command is
experimental, and if so what experimental feature does it depend on.)
- Document which installables depend on which experimental features.
I tried to use the same style (bold warning and block quote) that the
top of the man page uses.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This function returns true or false depending on whether the Nix client
is trusted or not. Mostly relevant when speaking to a remote store with
a daemon.
We include this information in `nix ping store` and `nix doctor`
Co-Authored-By: John Ericson <John.Ericson@Obsidian.Systems>
They are put in the manual separate pages under the new overarching
description of experimental features.
The settings page just lists the valid experimental feature names (so
people know what a valid setting entry looks like), with links to those
pages. It doesn't attempt to describe each experimental feature as that
is too much information for the configuration settings section.
Add a page explaining what “experimental features” are, when and how they should be used
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems>
the semantics are not explained in the referenced section any more, they
have been moved to the documentation for common options in the new CLI [0].
[0]: 703d863a48
Documentation on "classic" commands with many sub-commands are
notoriously hard to discover due to lack of overview and anchor links.
Additionally the information on common options and environment variables
is not accessible offline in man pages, and therefore often overlooked
by readers.
With this change, each sub-command of nix-store and nix-env gets its
own page in the manual (listed in the table of contents), and each own
man page.
Also, man pages for each subcommand now (again) list common options
and environment variables. While this makes each page quite long and
some common parameters don't apply, this should still make it easier
to navigate as that additional information was not accessible on the
command line at all.
It is now possible to run 'nix-store --<subcommand> --help` to display
help pages for the given subcommand.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This provides a platform-independent way to configure the SSL
certificates file in the Nix daemon. Previously we provided
instructions for overriding the environment variable in launchd, but
that obviously doesn't work with systemd. Now we can just tell users
to add
ssl-cert-file = /etc/ssl/my-certificate-bundle.crt
to their nix.conf.
Add the --base64 and --sri flags for the Base64 and SRI format output.
Add the --base16 flag to explicitly specify the hexadecimal format.
Add the --to-base64 and --to-sri flag to convert a hash to the above
mentioned format.
the term was hard to discover, as its definition and explanation were in
a very long document lacking an overview section.
search did not help because it occurs so often.
- clarify wording in the definition
- add an overview of installable types
- add "installable" to glossary
- link to definition from occurrences of the term
- be more precise about where store derivation outputs are processed
- installable Nix expressions must evaluate to a derivation
Co-authored-by: Adam Joseph <54836058+amjoseph-nixpkgs@users.noreply.github.com>
The release notes document the change in behavior, I don't include it
here so there is no risk to it getting out of sync.
> Motivation
>> Plumbing CLI should be simple
Store derivation installations are intended as "plumbing": very simple
utilities for advanced users and scripts, and not what regular users
interact with. (Similarly, regular Git users will use branch and tag
names not explicit hashes for most things.)
The plumbing CLI should prize simplicity over convenience; that is its
raison d'etre. If the user provides a path, we should treat it the same
way not caring what sort of path it is.
>> Scripting
This is especially important for the scripting use-case. when arbitrary
paths are sent to e.g. `nix copy` and the script author wants consistent
behavior regardless of what those store paths are. Otherwise the script
author needs to be careful to filter out `.drv` ones, and then run `nix
copy` again with those paths and `--derivation`. That is not good!
>> Surprisingly low impact
Only two lines in the tests need changing, showing that the impact of
this is pretty light.
Many command, like `nix log` will continue to work with just the
derivation passed as before. This because we used to:
- Special case the drv path and replace it with it's outputs (what this
gets rid of).
- Turn those output path *back* into the original drv path.
Now we just skip that entire round trip!
> Context
Issue #7261 lays out a broader vision for getting rid of `--derivation`,
and has this as one of its dependencies. But we can do this with or
without that.
`Installable::toDerivations` is changed to handle the case of a
`DerivedPath::Opaque` ending in `.drv`, which is new: it simply doesn't
need to do any extra work in that case. On this basis, commands like
`nix {show-derivation,log} /nix/store/...-foo.drv` still work as before,
as described above.
When testing older daemons, the post-build-hook will be run against the
old CLI, so we need the old version of the post-build-hook to support
that use-case.
Co-authored-by: Travis A. Everett <travis.a.everett@gmail.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
- `nixpkgsFor` does all of native, static, cross, and the different stdenvs.
- The main Nix derivation is no longer duplicated for static.
- DRY nixpkgs.lib and lib.genAttrs calls.
- Refer to current version in readme
- Split into flakes and non-flakes section
- Change order to move nix-build to the end, since people often start
with it in the beginning.
- Use proper "Note" syntax
- Add notes about editor integration
- Move information about target platforms and stdenvs into separate
sections
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Co-authored-by: Alexander Bantyev <alexander.bantyev@tweag.io>
Co-authored-by: Théophane Hufschmitt <theophane.hufschmitt@tweag.io>
XDG Base Directory is a standard for locations for storing various
files. Nix has a few files which seem to fit in the standard, but
currently use a custom location directly in the user's ~, polluting
it:
- ~/.nix-profile
- ~/.nix-defexpr
- ~/.nix-channels
This commit adds a config option (use-xdg-base-directories) to follow
the XDG spec and instead use the following locations:
- $XDG_STATE_HOME/nix/profile
- $XDG_STATE_HOME/nix/defexpr
- $XDG_STATE_HOME/nix/channels
If $XDG_STATE_HOME is not set, it is assumed to be ~/.local/state.
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
Co-authored-by: Tim Fenney <kodekata@gmail.com>
Co-authored-by: pasqui23 <pasqui23@users.noreply.github.com>
Co-authored-by: Artturin <Artturin@artturin.com>
Co-authored-by: John Ericson <Ericson2314@Yahoo.com>
`clang11StdenvPackages` does not exist
```
│ └───x86_64-linux
│ ├───ccacheStdenv: development environment 'nix'
│ ├───clang11Stdenv: development environment 'nix'
│ ├───clangStdenv: development environment 'nix'
│ ├───default: development environment 'nix'
│ ├───gccStdenv: development environment 'nix'
│ ├───libcxxStdenv: development environment 'nix'
│ └───stdenv: development environment 'nix'
```
Commit 14bc3ce3d6 (0.13~43) changed the
timestamps in the Nix store from 0 to 1. Update the nix-store man
page to match.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Allows checking directory entry type of a single file/directory.
This was added to optimize the use of `builtins.readDir` on some
filesystems and operating systems which cannot detect this information
using POSIX's `readdir`.
Previously `builtins.readDir` would eagerly use system calls to lookup
these filetypes using other interfaces; this change makes these
operations lazy in the attribute values for each file with application
of `builtins.readFileType`.
