Commit graph

198 commits

Author SHA1 Message Date
John Ericson
e514b3939a Add name to some error messages 2023-05-09 13:24:53 -04:00
John Ericson
668377f217 TextHashMethod -> TextIngestionMethod, gate with XP feature
I suppose we can use `dynamic-derivations` for the few things we neeed.
2023-04-17 19:02:45 -04:00
John Ericson
f56c4a5bdf Merge remote-tracking branch 'upstream/master' into ca-drv-exotic 2023-04-17 18:10:12 -04:00
John Ericson
d41e1bed5e Experimentally allow forcing nix-daemon trust; use this to test
We finally test the status quo of remote build trust in a number of
ways. We create a new experimental feature on `nix-daemon` to do so.

PR #3921, which improves the situation with trustless remote building,
will build upon these changes. This code / tests was pull out of there
to make this, so everything is easier to review, and in particular we
test before and after so the new behavior in that PR is readily apparent
from the testsuite diff alone.
2023-04-17 13:06:21 -04:00
Robert Hensing
3f9589f17e
Merge pull request #6312 from obsidiansystems/keyed-build-result
Shuffle `BuildResult` data definition, make state machine clearer, introduce `SingleDrvOutputs`
2023-04-17 18:08:05 +02:00
John Ericson
e12efa3654 Merge remote-tracking branch 'upstream/master' into ca-drv-exotic 2023-04-17 10:16:57 -04:00
John Ericson
24866b71c4 Introduce SingleDrvOutputs
In many cases we are dealing with a collection of realisations, they are
all outputs of the same derivation. In that case, we don't need
"derivation hashes modulos" to be part of our map key, because the
output names alone will be unique. Those hashes are still part of the
realisation proper, so we aren't loosing any information, we're just
"normalizing our schema" by narrowing the "primary key".

Besides making our data model a bit "tighter" this allows us to avoid a
double `for` loop in `DerivationGoal::waiteeDone`. The inner `for` loop
was previously just to select the output we cared about without knowing
its hash. Now we can just select the output by name directly.

Note that neither protocol is changed as part of this: we are still
transferring `DrvOutputs` over the wire for `BuildResult`s. I would only
consider revising this once #6223 is merged, and we can mention protocol
versions inside factored-out serialization logic. Until then it is
better not change anything because it would come a the cost of code
reuse.
2023-04-15 12:51:19 -04:00
John Ericson
fd21f9d76e Merge remote-tracking branch 'upstream/master' into path-info 2023-04-07 20:39:04 -04:00
matthewcroughan
9207f94582 Add Store::isTrustedClient()
This function returns true or false depending on whether the Nix client
is trusted or not. Mostly relevant when speaking to a remote store with
a daemon.

We include this information in `nix ping store` and `nix doctor`

Co-Authored-By: John Ericson <John.Ericson@Obsidian.Systems>
2023-04-06 19:59:57 -04:00
John Ericson
eeecfacb43 Merge branch 'path-info' into ca-drv-exotic 2023-04-01 16:40:32 -04:00
John Ericson
f7f44f7c96 Merge commit 'aa99005004bccc9be506a2a2f162f78bad4bcb41' into ca-drv-exotic 2023-04-01 15:15:32 -04:00
John Ericson
c51d554c93 Use "raw pattern" for content address types
We weren't because this ancient PR predated it!

This is actually a new version of the pattern which addresses some
issues identified in #7479.
2023-03-30 17:12:49 -04:00
John Ericson
296831f641 Move enabled experimental feature to libutil struct
This is needed in subsequent commits to allow the settings and CLI args
infrastructure itself to read this setting.
2023-03-20 11:05:22 -04:00
Eelco Dolstra
29abc8e764 Remove FormatOrString and remaining uses of format() 2023-03-02 15:57:54 +01:00
John Ericson
5abd643c6d Merge branch 'path-info' into ca-drv-exotic 2023-02-28 12:46:00 -05:00
Eelco Dolstra
dbe0748f97
Merge pull request #7739 from obsidiansystems/user-settings
Move `trustedUsers` and `allowedUsers` to separate config struct
2023-02-03 11:55:37 +01:00
John Ericson
a47e055e09 Move trustedUsers and allowedUsers to separate config struct
These settings are not needed for libstore at all, they are just used by
the nix daemon *command* for authorization on unix domain sockets. My
moving them to a new configuration struct just in that file, we avoid
them leaking anywhere else.

Also, it is good to break up the mammoth `Settings` struct in general.
Issue #5638 tracks this.

The message is not changed because I do not want to regress in
convenience to the user. Just saying "this connection is not trusted"
doesn't tell them out to fix the issue. The ideal thing to do would be
to somehow parameterize `processCommand` on how the error should be
displayed, so different sorts of connections can display different
information to the user based on how authentication is performed for the
connection in question. This, however, is a good bit more work, so it is
left for the future.

This came up with me thinking about the tcp:// store (#5265). The larger
project is not TCP *per se*, but the idea that it should be possible for
something else to manage access control to services like the Nix Daemon,
and those services simply trust or trust the incoming connection as they
are told. This is a more capability-oriented way of thinking about trust
than "every server implements its own auth separately" as we are used to today.

Its very great that libstore itself already implements just this model,
and so via this refactor I basically want to "enshrine" that so it
continues to be the case.
2023-02-02 14:17:24 -05:00
John Ericson
479c011784 Get rid of the authHook parameter on processConnection
This is (morally) dead code.

As @edolstra pointed out in
https://github.com/NixOS/nix/pull/5226#discussion_r1073470813, this is
no longer needed.

I created this in 8d4162ff9e, so it is
fitting that I now destroy it :).
2023-02-02 12:02:03 -05:00
Shea Levy
895c525d04
daemon: Warn on old clients passing unexpected plugin-files.
The setting itself was already ignored due to exception trying to set pluginFiles.
2023-02-02 06:03:45 -05:00
Solène Rapenne
64951d9125 Update src/libstore/daemon.cc
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
2023-01-26 09:34:25 +01:00
Solène Rapenne
a96156c58f warnings: enhance the case of untrusted substituter for untrusted user 2023-01-26 09:34:25 +01:00
John Ericson
7c82213813 Merge branch 'path-info' into ca-drv-exotic 2023-01-14 17:09:58 -05:00
John Ericson
b3d91239ae Make ValidPathInfo have plain StorePathSet references like before
This change can wait for another PR.
2023-01-14 16:42:03 -05:00
John Ericson
81727f85cb Merge branch 'path-info' into ca-drv-exotic 2023-01-06 15:45:34 -05:00
John Ericson
46e942ff9e Do big rename to clean up code
- `PathReferences` -> `References`

- `PathReferences<StorePath>` -> `StoreReference`

- `references` -> `others`

- `hasSelfReference` -> `self`

And get rid of silly subclassing
2023-01-06 15:36:05 -05:00
John Ericson
989b8065b4 Merge branch 'path-info' into ca-drv-exotic 2023-01-06 10:56:22 -05:00
John Ericson
e9fc1e4fdb Merge remote-tracking branch 'upstream/master' into path-info 2023-01-06 10:35:20 -05:00
Linus Heckemann
8e0946e8df Remove repeat and enforce-determinism options
These only functioned if a very narrow combination of conditions held:

- The result path does not yet exist (--check did not result in
  repeated builds), AND
- The result path is not available from any configured substituters, AND
- No remote builders that can build the path are available.

If any of these do not hold, a derivation would be built 0 or 1 times
regardless of the repeat option. Thus, remove it to avoid confusion.
2022-12-07 11:36:48 +01:00
Matthew Bauer
6e049ae607 Allow pass max-silent-time and build-poll-interval to daemon untrusted
These settings seem harmless, they control the same polling
functionality that timeout does, but with different behavior. Should
be safe for untrusted users to pass in.
2022-09-22 13:59:16 -05:00
John Ericson
ff2a8ccfe1 Merge branch 'path-info' into ca-drv-exotic 2022-03-25 19:40:52 +00:00
John Ericson
0dc2974930 Merge remote-tracking branch 'upstream/master' into path-info 2022-03-25 19:25:08 +00:00
John Ericson
a544ed7684 Generalize DerivationType in preparation for impure derivations 2022-03-18 14:59:56 +00:00
John Ericson
a03b1fd7f6 Deduplicate the Store downcasting with a template 2022-03-11 13:32:33 +00:00
John Ericson
678d1c2aa0 Factor out a LogStore interface
Continue progress on #5729.

Just as I hoped, this uncovered an issue: the daemon protocol is missing
a way to query build logs. This doesn't effect `unix://`, but does
effect `ssh://`. A FIXME is left for this, so we come back to it later.
2022-03-11 13:32:16 +00:00
John Ericson
073e134de6 Rename requireGcStore to GcStore::require
I should have done this to begin with. This will be nicer once more
Store sub-interfaces exist too, to illustrate the pattern.
2022-03-11 13:27:38 +00:00
John Ericson
938650700f Merge branch 'path-info' into ca-drv-exotic 2022-03-10 16:20:01 +00:00
John Ericson
8ba089597f Merge remote-tracking branch 'upstream/master' into path-info 2022-03-10 15:48:14 +00:00
Eelco Dolstra
a4604f1928 Add Store::buildPathsWithResults()
This function is like buildPaths(), except that it returns a vector of
BuildResults containing the exact statuses and output paths of each
derivation / substitution. This is convenient for functions like
Installable::build(), because they then don't need to do another
series of calls to get the outputs of CA derivations. It's also a
precondition to impure derivations, where we *can't* query the output
of those derivations since they're not stored in the Nix database.

Note that PathSubstitutionGoal can now also return a BuildStatus.
2022-03-08 19:56:34 +01:00
John Ericson
6636202356 Factor out a GcStore interface
Starts progress on #5729.

The idea is that we should not have these default methods throwing
"unimplemented". This is a small step in that direction.

I kept `addTempRoot` because it is a no-op, rather than failure. Also,
as a practical matter, it is called all over the place, while doing
other tasks, so the downcasting would be annoying.

Maybe in the future I could move the "real" `addTempRoot` to `GcStore`,
and the existing usecases use a `tryAddTempRoot` wrapper to downcast or
do nothing, but I wasn't sure whether that was a good idea so with a
bias to less churn I didn't do it yet.
2022-03-03 19:01:25 +00:00
John Ericson
e862833ec6 Move BuildResult defintion to its own header
Just like we did for `ValidPathInfo` in
d92d4f85a5.
2022-03-01 19:43:07 +00:00
Eelco Dolstra
df552ff53e Remove std::string alias (for real this time)
Also use std::string_view in a few more places.
2022-02-25 16:13:02 +01:00
Eelco Dolstra
35dbdbedd4 nix store ping: Report Nix daemon version
Fixes #5952.
2022-01-25 21:15:58 +01:00
Eelco Dolstra
4dda1f92aa Add command 'nix store copy-log'
Fixes #5222.
2022-01-18 14:08:49 +01:00
Eelco Dolstra
d62a9390fc Get rid of std::shared_ptr<std::string> and ref<std::string>
These were needed back in the pre-C++11 era because we didn't have
move semantics. But now we do.
2022-01-18 11:12:30 +01:00
Eelco Dolstra
9747ea84b4 Remove CPU locking
This was already accidentally disabled in ba87b08. It also no longer
appears to be beneficial, and in fact slow things down, e.g. when
evaluating a NixOS system configuration:

  elapsed time:       median =      3.8170  mean =      3.8202  stddev =      0.0195  min =      3.7894  max =      3.8600  [rejected, p=0.00000, Δ=0.36929±0.02513]
2021-12-22 15:56:25 +01:00
Eelco Dolstra
bc57b3854e
Merge pull request #5695 from obsidiansystems/tidy-logging
Tidy up the logging
2021-12-09 15:31:08 +01:00
John Ericson
95157b4e66 Push wopAddToStore old style stream adapters into smaller scopes
This doesn't fix the bug, but makes the code less difficult to read.
Also improve the comments, now that it is clear what part is needed in
each code path.
2021-11-30 22:10:58 +00:00
John Ericson
70a717f7a8 Nix daemon stream old wopAddToStore
No more buffering in string.
2021-11-30 21:55:53 +00:00
John Ericson
1f15441103 Tidy up the logging
Use the macros more, so we properly skip work when the log level
excludes. Also log the daemon operation number on the daemon side.
2021-11-30 20:23:13 +00:00
Eelco Dolstra
67179472df
Merge pull request #5494 from tweag/balsoft/allow-references-in-addPath
Allow references in addPath
2021-11-09 15:57:39 +01:00