* docs: unify documentation on search paths
- put all the information on search path semantics into `builtins.findFile`
- put all the information on determining the value of `builtins.nixPath` into the
`nix-path` setting
maybe `builtins.nixPath` is a better place for this, but those bits
can still be moved around now that it's all next to each other.
- link to the syntax page for lookup paths from all places that are
concerned with it
- add or clarify examples
- add a test verifying a claim from documentation
This also bans various sneaking of negative numbers from the language
into unsuspecting builtins as was exposed while auditing the
consequences of changing the Nix language integer type to a newtype.
It's unlikely that this change comprehensively ensures correctness when
passing integers out of the Nix language and we should probably add a
checked-narrowing function or something similar, but that's out of scope
for the immediate change.
During the development of this I found a few fun facts about the
language:
- You could overflow integers by converting from unsigned JSON values.
- You could overflow unsigned integers by converting negative numbers
into them when going into Nix config, into fetchTree, and into flake
inputs.
The flake inputs and Nix config cannot actually be tested properly
since they both ban thunks, however, we put in checks anyway because
it's possible these could somehow be used to do such shenanigans some
other way.
Note that Lix has banned Nix language integer overflows since the very
first public beta, but threw a SIGILL about them because we run with
-fsanitize=signed-overflow -fsanitize-undefined-trap-on-error in
production builds. Since the Nix language uses signed integers, overflow
was simply undefined behaviour, and since we defined that to trap, it
did.
Trapping on it was a bad UX, but we didn't even entirely notice
that we had done this at all until it was reported as a bug a couple of
months later (which is, to be fair, that flag working as intended), and
it's got enough production time that, aside from code that is IMHO buggy
(and which is, in any case, not in nixpkgs) such as
https://git.lix.systems/lix-project/lix/issues/445, we don't think
anyone doing anything reasonable actually depends on wrapping overflow.
Even for weird use cases such as doing funny bit crimes, it doesn't make
sense IMO to have wrapping behaviour, since two's complement arithmetic
overflow behaviour is so *aggressively* not what you want for *any* kind
of mathematics/algorithms. The Nix language exists for package
management, a domain where bit crimes are already only dubiously in
scope to begin with, and it makes a lot more sense for that domain for
the integers to never lose precision, either by throwing errors if they
would, or by being arbitrary-precision.
Fixes: https://github.com/NixOS/nix/issues/10968
Original-CL: https://gerrit.lix.systems/c/lix/+/1596
Change-Id: I51f253840c4af2ea5422b8a420aa5fafbf8fae75
Few filesystem-related tests rely on PATH_MAX for buffers, and PATH_MAX
is optional in POSIX (and not available on the Hurd). To make them build
and pass, provide a fallback definition of PATH_MAX in case not
available.
Ideally speaking, the tests ought to not unconditionally rely on
PATH_MAX, do alternative strategies (e.g. dynamically allocate buffers,
expand them as needed, etc); OTOH this is test code, so it would be more
work that what it would be worth, so IMHO the define fallback is good
enough.
This should make the test more robust, considering the strange hang
in https://hydra.nixos.org/build/267517233/nixlog/8
`builder` seems to have reached `multi-user.target` before the
SSH connection was established, but this seems to be coincidental.
This does tell us that enforcing this has a minimal cost in terms
of runtime.
Waiting for `multi-user.target` on the client is honestly paranoid,
but flaky tests are very bad for productivity.
Trying to learn more about enigmatic spurious hang at
https://hydra.nixos.org/build/267517233/nixlog/8
- builder1 seems to have started properly
- ssh connection and session are established
- ssh client doesn't exit or client.succeed does not return
for some reason.
Seeing the stdout on the console might give a tiny bit more info.
Meson uses a venerable GNU convention described in
https://www.gnu.org/software/automake/manual/html_node/Scripts_002dbased-Testsuites.html
in which:
> When no test protocol is in use, an exit status of 0 from a test
> script will denote a success, an exit status of 77 a skipped test, an
> exit status of 99 a hard error, and any other exit status will denote
> a failure.
77 is thus what we want, not 99.
* fix NIX_PATH overriding
- test restricted evaluation
- test precedence for setting the search path
Co-authored-by: Robert Hensing <robert@roberthensing.nl>
Co-authored-by: John Ericson <git@JohnEricson.me>
Currently, the worker protocol has a version number that we increment
whenever we change something in the protocol. However, this can cause
a collision between Nix PRs / forks that make protocol changes
(e.g. PR #9857 increments the version, which could collide with
another PR). So instead, the client and daemon now exchange a set of
protocol features (such as `auth-forwarding`). They will use the
intersection of the sets of features, i.e. the features they both
support.
Note that protocol features are completely distinct from
`ExperimentalFeature`s.
... as well as match buildReadlineNoMarkdown.
Unfortunately it doesn't support long inputs or multiline inputs
for now.
This needs to make better use of the interacter interface.
Following what is outlined in #10766 refactor the uds-remote-store such
that the member variables (state) don't live in the store itself but in
the config object.
Additionally, the config object includes a new necessary constructor
that takes a scheme & authority.
Tests are commented out because of linking errors with the current config system.
When there is a new config system we can reenable them.
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems>
Progress towards #10766
I thought that #10768 achieved, but when I went to use this stuff (in
Hydra), turns out it did not. (Those `using FooConfig;` lines were not
working --- they are so finicky!) This PR gets the job done, and adds
some trivial unit tests to make sure I did what I intended.
I had to add add a header to expose `SSHStoreConfig`, after which the
preexisting `ssh-store-config.*` were very confusingly named files, so I
renamed them to `common-ssh-store-config.hh` to match the type defined
therein.
Previous test implementation assumed that grep supports newlines
in patterns. It doesn't, so tests spuriously passed, even though
some tests outputs were broken.
This patches output (and expected output) before grepping,
so there're no newlines in pattern.
This makes it possible to certain discern failures from empty
snippets, which I think is an ok review comment.
Maybe it should do so for swapped column indexes too, but I'm not
sure.
I don't think it matters in the grand scheme. We don't even have
a real use case for `nullopt` now anyway.
Since we don't have a use case, I'm not applying this logic to
higher level functions yet.
Known behavior changes:
- `MemorySourceAccessor`'s comparison operators no longer forget to
compare the `SourceAccessor` base class.
Progress on #10832
What remains for that issue is hopefully much easier!
Progress on #5638
There are still a global fetcher and eval settings, but they are pushed
down into `libnixcmd`, which is a lot less bad a place for this sort of
thing.
Continuing process pioneered in
52bfccf8d8.
It is unclear to me why this worked when not in a VM test, but the
explanation would be in the part of nix-shell we're getting rid of
with the devShell attribute.
When --unpack was used the nix would add the current directory to the
nix store instead of the content of unpacked.
The reason for this is that std::distance already consumes the iterator.
To fix this we re-instantiate the directory iterator in case the
directory only contains a single entry.
- use the iterator in `CanonPath` to count `level`
- use the `CanonPath::basename` method
- use `CanonPath::root` instead of `CanonPath{""}`
- remove `Path` and `PathView`, use `std::filesystem::path` directly
Inspired by
010ff57ebb
From the original PR:
> We do not have any of these warnings appearing at the moment, but
> it seems like a good idea to enable [[nodiscard]] checking anyway.
> Once we start introducing more functions with must-use conditions we will
> need such checking, and the rust stdlib has proven them very useful.
The code that counts the number of elided attrs incorrectly used the
per-printer "global" attribute counter instead of a counter that
was relevant only to the current attribute set.
This bug flew under the radar because often the attribute sets aren't
nested, not big enough, or we wouldn't pay attention to the numbers.
I've noticed the issue because the difference underflowed.
Although this behavior is tested by the functional test
lang/eval-fail-bad-string-interpolation-4.nix, the underflow slipped
through review. A simpler reproducer would be as follows, but I
haven't added it to the test suite to keep it simple and marginally
faster.
```
$ nix run nix/2.23.1 -- eval --expr '"" + (let v = { a = { a = 1; b = 2; c = 1; d = 1; e = 1; f = 1; g = 1; h = 1; }; b = { a = 1; b = 1; c = 1; }; }; in builtins.deepSeq v v)'
error:
… while evaluating a path segment
at «string»:1:6:
1| "" + (let v = { a = { a = 1; b = 2; c = 1; d = 1; e = 1; f = 1; g = 1; h = 1; }; b = { a = 1; b = 1; c = 1; }; }; in builtins.deepSeq v v)
| ^
error: cannot coerce a set to a string: { a = { a = 1; b = 2; c = 1; d = 1; e = 1; f = 1; g = 1; h = 1; }; b = { a = 1; «4294967289 attributes elided» }; }
```
The old `std::variant` is bad because we aren't adding a new case to
`FileIngestionMethod` so much as we are defining a separate concept ---
store object content addressing rather than file system object content
addressing. As such, it is more correct to just create a fresh
enumeration.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
This tests the parser and JSON format using the DRV files from the tests
added in the previous commit.
Co-Authored-By: John Ericson <John.Ericson@Obsidian.Systems>
This tests the Nix language side of things.
We are purposely skipping most of `common.sh` because it is overkill for
this test: we don't want to have an "overfit" test environment.
Co-Authored-By: John Ericson <John.Ericson@Obsidian.Systems>
Instead of running the builds under
`$TMPDIR/{unique-build-directory-owned-by-the-build-user}`, run them
under `$TMPDIR/{unique-build-directory-owned-by-the-daemon}/{subdir-owned-by-the-build-user}`
where the build directory is only readable and traversable by the daemon user.
This achieves two things:
1. It prevents builders from making their build directory world-readable
(or even writeable), which would allow the outside world to interact
with them.
2. It prevents external processes running as the build user (either
because that somehow leaked, maybe as a consequence of 1., or because
`build-users` isn't in use) from gaining access to the build
directory.
