We finally test the status quo of remote build trust in a number of
ways. We create a new experimental feature on `nix-daemon` to do so.
PR #3921, which improves the situation with trustless remote building,
will build upon these changes. This code / tests was pull out of there
to make this, so everything is easier to review, and in particular we
test before and after so the new behavior in that PR is readily apparent
from the testsuite diff alone.
Issues:
1. Features gated on disabled experimental settings should warn and be
ignored, not silently succeed.
2. Experimental settings in the same config "batch" (file or env var)
as the enabling of the experimental feature should work.
3. For (2), the order should not matter.
These are analogous to the issues @roberth caught with my changes for
arg handling, but they are instead for config handling.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
In many cases we are dealing with a collection of realisations, they are
all outputs of the same derivation. In that case, we don't need
"derivation hashes modulos" to be part of our map key, because the
output names alone will be unique. Those hashes are still part of the
realisation proper, so we aren't loosing any information, we're just
"normalizing our schema" by narrowing the "primary key".
Besides making our data model a bit "tighter" this allows us to avoid a
double `for` loop in `DerivationGoal::waiteeDone`. The inner `for` loop
was previously just to select the output we cared about without knowing
its hash. Now we can just select the output by name directly.
Note that neither protocol is changed as part of this: we are still
transferring `DrvOutputs` over the wire for `BuildResult`s. I would only
consider revising this once #6223 is merged, and we can mention protocol
versions inside factored-out serialization logic. Until then it is
better not change anything because it would come a the cost of code
reuse.
If my memory is correct, @edolstra objected to modifying `wantedOutputs`
upon falling back to doing a build (as we did before), because we should
only modify it in response to new requests --- *actual* wants --- and
not because we are "incidentally" building all the outptus beyond what
may have been requested.
That's a fair point, and the alternative is to replace the boolean soup
with proper enums: Instead of modifying `wantedOuputs` som more, we'll
modify `needsRestart` to indicate we are passed the need.
In https://github.com/NixOS/nix/pull/6311#discussion_r834863823, I
realized since derivation goals' wanted outputs can "grow" due to
overlapping dependencies (See `DerivationGoal::addWantedOutputs`, called
by `Worker::makeDerivationGoalCommon`), the previous bug fix had an
unfortunate side effect of causing more pointless rebuilds.
In paticular, we have this situation:
1. Goal made from `DerivedPath::Built { foo, {a} }`.
2. Goal gives on on substituting, starts building.
3. Goal made from `DerivedPath::Built { foo, {b} }`, in fact is just
modified original goal.
4. Though the goal had gotten as far as building, so all outputs were
going to be produced, `addWantedOutputs` no longer knows that and so
the goal is flagged to be restarted.
This might sound far-fetched with input-addressed drvs, where we usually
basically have all our goals "planned out" before we start doing
anything, but with CA derivation goals and especially RFC 92, where *drv
resolution* means goals are created after some building is completed, it
is more likely to happen.
So the first thing to do was restore the clearing of `wantedOutputs` we
used to do, and then filter the outputs in `buildPathsWithResults` to
only get the ones we care about.
But fix also has its own side effect in that the `DerivedPath` in the
`BuildResult` in `DerivationGoal` cannot be trusted; it is merely the
*first* `DerivedPath` for which this goal was originally created.
To remedy this, I made `BuildResult` be like it was before, and instead
made `KeyedBuildResult` be a subclass wit the path. Only
`buildPathsWithResults` returns `KeyedBuildResult`s, everything else
just becomes like it was before, where the "key" is unambiguous from
context.
I think separating the "primary key" field(s) from the other fields is
good practical in general anyways. (I would like to do the same thing
for `ValidPathInfo`.) Among other things, it allows constructions like
`std::map<Key, ThingWithKey>` where doesn't contain duplicate keys and
just precludes the possibility of those duplicate keys being out of
sync.
We might leverage the above someday to overload `buildPathsWithResults`
to take a *set* of return a *map* per the above.
-----
Unfortunately, we need to avoid C++20 strictness on designated
initializers.
(BTW
https://www.open-std.org/jtc1/sc22/wg21/docs/papers/2021/p2287r1.html
this offers some new syntax for this use-case. Hopefully this will be
adopted and we can eventually use it.)
No having that yet, maybe it would be better to not make
`KeyedBuildResult` a subclass to just avoid this.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
As requested by @roberth, it is good to call out the specific instances
we care about, which is `!` for the RPC protocols, and `^` for humans.
This doesn't take advantage of parametricity as much, but since the
human and computer interfaces are good to decouple anyways (we don't
care if they drift further apart over time in the slightest) some
separation and slight duplication is fine.
Also, unit test both round trips.
More progress on issue #5729
The method trivially generalizes to be store-implementation-agnostic, in
fact.
However, we force it to continue to be unimplemented with `RemoteStore`
and `LegacySSHStore` because the implementation we'd get via the
generalization is probably not the one users expect. This keeps our
hands untied to do it right going forward.
For more about the tension between the scheduler logic being
store-type-agnostic and remote stores doing their own scheduling, see
issues #5025 and #5056.
- Create a glossary entry for experimental features.
- Have the man page experimental feature notice link `nix-commmand`.
(Eventually this should be programmed, based on whether the command is
experimental, and if so what experimental feature does it depend on.)
- Document which installables depend on which experimental features.
I tried to use the same style (bold warning and block quote) that the
top of the man page uses.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
The warning message should produce an installable name that can be
passed to `nix build`, `nix path-info`, etc. again. Since the CLI
expects that the .drv path and the output names are separated by
a caret, the warning message must also separate the .drv path and output
names with a caret.
However, `DerivedPath::Built.to_string()` uses an exclamation point as
the separator instead. This commit adds a `separator` argument to the
to_string method.
This changes the warning message from:
If this command is now failing try again with '/nix/store/foo.drv!*'
to:
If this command is now failing try again with '/nix/store/foo.drv^*'
More progress on issue #5729.
Instead of having it by the default method in `Store` itself, have it be
the implementation in `DummyStore` and `LegacySSHStore`. Then just the
implementations which fail to provide the method pay the "penalty" of
dealing with the icky `unimplemented` function for non-compliance.
Combined with my other recent PRs, this finally makes `Store` have no
`unsupported` calls!
This is somewhat hacky fix just for 2.15. I unintentionally hid them
from the manual, when no one wanted to hide them that (including
myself). I also required the experimental feature to be enabled in an
order-dependent way, which is not good.
The simplest fix for this immanent release is just to always show them,
and always allow them to be set.
Effectively undoes some changes from aa663b7e89
Getting the occasional SQLITE_BUSY is expected when the database is being
accessed concurrently. The retry will likely succeed so it is pointless to warn
immediately. Instead we track how long each retrySQLite block has been running,
and only begin warning after a second has elapsed (and then every 10 seconds
subsequently).
Some of the factoring out was taken from #7912 by @mupdt. Thanks!
No behavior should be changed in this commit.
Co-Authored-By: mupdt <25388474+mupdt@users.noreply.github.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
How signals should be handled depends on what kind of process Nix
is integrated into. The signal handler thread used by the stand-alone
Nix commands / processes may not work well in the context of other
runtime systems, such as those of Python, Perl, or Haskell.
libutil is a dependency of libstore, so it should always be
initialized as such.
libutil is also a dependency of libmain. Being explicit about this
dependency might be good, but not worth the slight code complexity
until the library structure gets more advanced.
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
Quote
Why not initLibExpr()? initGC() is essentially that, but
detectStackOverflow is not an instance of the init function concept, as
it may have to be invoked more than once per process.
Furthermore, renaming initGC to initLibExpr is more trouble than it's
worth at this time.
This code is bad. We shouldn't unset variables in programs whose
children may need them. Fixing one issue at a time, so postponing.
See https://github.com/NixOS/nix/issues/7731
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
It is required for the sandbox, which is a libstore responsibility;
not just libmain.
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
The goal of this reordering is to make initLibStore self-sufficient
in a following commit.
Part of an effort to make it easier to initialize the right things,
by moving code into the appropriate libraries.
Using libstore without loading the config file is risky, as sqlite
may then be misconfigured. See https://github.com/cachix/cachix/issues/475
* Finish converting existing comments for internal API docs
99% of this was just reformatting existing comments. Only two exceptions:
- Expanded upon `BuildResult::status` compat note
- Split up file-level `symbol-table.hh` doc comments to get
per-definition docs
Also fixed a few whitespace goofs, turning leading tabs to spaces and
removing trailing spaces.
Picking up from #8133
* Fix two things from comments
* Use triple-backtick not indent for `dumpPath`
* Convert GNU-style `\`..'` quotes to markdown style in API docs
This will render correctly.
This is non-breaking change in the to-JSON direction. This *is* a
breaking change in the from-JSON direction, but we don't care, as that
is brand new in this PR.
`nix show-derivation --help` currently has the sole public documentation
of this format, it is updated accordingly.
The `write` name is ambiguous and could lead to some funny bugs like
https://github.com/NixOS/nix/pull/8173#issuecomment-1500009480. So
rename it to the more explicit `writeUnbuffered`.
Besides, this method shouldn't be (and isn't) used outside of the class
implementation, so mark it `protected`.
This makes it more symetrical to `BufferedSource` which uses a
`protected readUnbuffered` method.
This function returns true or false depending on whether the Nix client
is trusted or not. Mostly relevant when speaking to a remote store with
a daemon.
We include this information in `nix ping store` and `nix doctor`
Co-Authored-By: John Ericson <John.Ericson@Obsidian.Systems>
They are put in the manual separate pages under the new overarching
description of experimental features.
The settings page just lists the valid experimental feature names (so
people know what a valid setting entry looks like), with links to those
pages. It doesn't attempt to describe each experimental feature as that
is too much information for the configuration settings section.
This introduces the SourcePath type from lazy-trees as an abstraction
for accessing files from inputs that may not be materialized in the
real filesystem (e.g. Git repositories). Currently, however, it's just
a wrapper around CanonPath, so it shouldn't change any behaviour. (On
lazy-trees, SourcePath is a <InputAccessor, CanonPath> tuple.)
Instead of constructing a markdown list in C++ (which involved all sorts
of nasty string literals), export some JSON and assemble it with the
manual build system.
Besides following the precedent set with other dumped data, this is a
better separate of content and presentation; if we decide for example we
want to display this information in a different way, or in a different
section of the manual, it will become much easier to do so.
switch statements must now match all enum values or disable the
warning.
Explicit is good. This has helped us find two bugs, after solving
another one by debugging.
From now on, adding to an enum will raise errors where they are
not explicitly handled, which is good for productivity, and helps
us decide the correct behavior in all usages.
Notably still excluded from this though are the cases where the
warning is disabled by local pragmas.
fromTOML.cc did not build despite a top-level pragma, so I've had
to resort to a makefile solution for that.
Prior to this, there was an ad-hoc whitelist in `main.cc`. Now, every
command states its stability.
In a future PR, we will adjust the manual to take advantage of this new
information in the JSON.
(It will be easier to do that once we have some experimental feature
docs to link too; see #5930 and #7798.)
The code is not local-store-specific, so we should share it with all
stores. More uniform behavior is better, and a less store-specific
functionality is more maintainable.
This fixes a FIXME added in f73d911628 by @edolstra himself.
Documentation on "classic" commands with many sub-commands are
notoriously hard to discover due to lack of overview and anchor links.
Additionally the information on common options and environment variables
is not accessible offline in man pages, and therefore often overlooked
by readers.
With this change, each sub-command of nix-store and nix-env gets its
own page in the manual (listed in the table of contents), and each own
man page.
Also, man pages for each subcommand now (again) list common options
and environment variables. While this makes each page quite long and
some common parameters don't apply, this should still make it easier
to navigate as that additional information was not accessible on the
command line at all.
It is now possible to run 'nix-store --<subcommand> --help` to display
help pages for the given subcommand.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This fixes the issue that `nix-build`, without experimental feature
'nix-command' enabled, recommends the experimental CLI `nix log` to view
build logs. Now it'll recommend the stable `nix-store -l` CLI instead.
Fixes https://github.com/NixOS/nix/issues/8118
See the note in the test.
We don't want these flags showing up for commands where they are
irrelevant.
Eventually, this needs a proper fix, but it need not be a blocker for
stabilize: for a quick-n-dirty punt, just put these flags behind the
`nix-command` unstable feature.
This is fine because they are only relevant for commands which we don't
need to stabilize for a while.
`legacyPackages` of nixpkgs trigger eval errors in `hasContent`, causing
the whole `legacyPackages` being skipped. We should treat it as
has-content in that case.
Instead of having a bunch of optional fields, have a few subclasses
which can have mandatory fields.
Additionally, the new `getExtraPathInfo`, and `nixpkgsFlakeRef`, are
moved to `InstallableValue`.
I did these things because https://github.com/NixOS/rfcs/pull/134 ; with
these things moved to `InstallableValue`, the base `Installable` no
longer depends on libexpr! This is a major step towards that.
Also, add a bunch of doc comments for sake of the internal API docs.
Otherwise, a trace consisting of
frame
frame
frame
non-frame
... would reach the non-frame and print the suggestion, even though
it would have ignored the non-frame anyway.
This resulted in a peculariar situation where --show-trace would have
no apparent effect, as the trace was actually already complete.
Pause logger before starting SSH connections, and resume it after the
connection is established, so that SSH password prompts are not erased
by the logger's updates.
Otherwise, when running as root and user namespaces are enabled,
opening the slave fails with EPERM.
Fixes "opening pseudoterminal slave: Permission denied" followed by a
hang (https://hydra.nixos.org/build/213104244), and "error: getting
sandbox mount namespace: No such file or directory" (#8072), which
happens when the child fails very quickly and consequently reading
/proc/<child>/ns fails.
If we conditionally "declare" the argument, as we did before, based upon
weather the feature is enabled, commands like
nix --experimental-features=foo ... --thing-gated-on-foo
won't work, because the experimental feature isn't enabled until *after*
we start parsing.
Instead, allow arguments to also be associated with experimental
features (just as we did for builtins and settings), and then the
command line parser will filter out the experimental ones.
Since the effects of arguments (handler functions) are performed right
away, we get the required behavior: earlier arguments can enable later
arguments enabled!
There is just one catch: we want to keep non-positional
flags...non-positional. So if
nix --experimental-features=foo ... --thing-gated-on-foo
works, then
nix --thing-gated-on-foo --experimental-features=foo ...
should also work.
This is not my favorite long-term solution, but for now this is
implemented by delaying the requirement of needed experimental features
until *after* all the arguments have been parsed.
We hide them in various ways if the experimental feature isn't enabled.
To do this, we had to move the experimental features list out of
libnixstore, because the setting machinary itself depends on it. To do
that, we made a new `ExperimentalFeatureSettings`.
This provides a platform-independent way to configure the SSL
certificates file in the Nix daemon. Previously we provided
instructions for overriding the environment variable in launchd, but
that obviously doesn't work with systemd. Now we can just tell users
to add
ssl-cert-file = /etc/ssl/my-certificate-bundle.crt
to their nix.conf.
These methods would previously fail on the other `Installable`s, so
moving them to this class is more correct as to where they actually
work.
Additionally, a `InstallableValueCommand` is created to make it easier
(or rather no worse than before) to write commands that just work on
`InstallableValue`s.
Besides being a cleanup to avoid failing default methods, this gets us
closer to https://github.com/NixOS/rfcs/pull/134.
Already, we had classes like `BuiltPathsCommand` and `StorePathsCommand`
which provided alternative `run` virtual functions providing the
implementation with more arguments. This was a very nice and easy way to
make writing command; just fill in the virtual functions and it is
fairly clear what to do.
However, exception to this pattern were `Installable{,s}Command`. These
two classes instead just had a field where the installables would be
stored, and various side-effecting `prepare` and `load` machinery too
fill them in. Command would wish out those fields.
This isn't so clear to use.
What this commit does is make those command classes like the others,
with richer `run` functions.
Not only does this restore the pattern making commands easier to write,
it has a number of other benefits:
- `prepare` and `load` are gone entirely! One command just hands just
hands off to the next.
- `useDefaultInstallables` because `defaultInstallables`. This takes
over `prepare` for the one case that needs it, and provides enough
flexiblity to handle `nix repl`'s idiosyncratic migration.
- We can use `ref` instead of `std::shared_ptr`. The former must be
initialized (so it is like Rust's `Box` rather than `Option<Box>`,
This expresses the invariant that the installable are in fact
initialized much better.
This is possible because since we just have local variables not
fields, we can stop worrying about the not-yet-initialized case.
- Fewer lines of code! (Finally I have a large refactor that makes the
number go down not up...)
- `nix repl` is now implemented in a clearer way.
The last item deserves further mention. `nix repl` is not like the other
installable commands because instead working from once-loaded
installables, it needs to be able to load them again and again.
To properly support this, we make a new superclass
`RawInstallablesCommand`. This class has the argument parsing and
completion logic, but does *not* hand off parsed installables but
instead just the raw string arguments.
This is exactly what `nix repl` needs, and allows us to instead of
having the logic awkwardly split between `prepare`,
`useDefaultInstallables,` and `load`, have everything right next to each
other. I think this will enable future simplifications of that argument
defaulting logic, but I am saving those for a future PR --- best to keep
code motion and more complicated boolean expression rewriting separate
steps.
The "diagnostic ignored `-Woverloaded-virtual`" pragma helps because C++
doesn't like our many `run` methods. In our case, we don't mind the
shadowing it all --- it is *intentional* that the derived class only
provides a `run` method, and doesn't call any of the overridden `run`
methods.
Helps with https://github.com/NixOS/rfcs/pull/134
Add the --base64 and --sri flags for the Base64 and SRI format output.
Add the --base16 flag to explicitly specify the hexadecimal format.
Add the --to-base64 and --to-sri flag to convert a hash to the above
mentioned format.
Hopefully this fixes "unexpected EOF" failures on macOS
(#3137, #3605, #7242, #7702).
The problem appears to be that under some circumstances, macOS
discards the output written to the slave side of the
pseudoterminal. Hence the parent never sees the "sandbox initialized"
message from the child, even though it succeeded. The conditions are:
* The child finishes very quickly. That's why this bug is likely to
trigger in nix-env tests, since that uses a builtin builder. Adding
a short sleep before the child exits makes the problem go away.
* The parent has closed its duplicate of the slave file
descriptor. This shouldn't matter, since the child has a duplicate
as well, but it does. E.g. moving the close to the bottom of
startBuilder() makes the problem go away. However, that's not a
solution because it would make Nix hang if the child dies before
sending the "sandbox initialized" message.
* The system is under high load. E.g. "make installcheck -j16" makes
the issue pretty reproducible, while it's very rare under "make
installcheck -j1".
As a fix/workaround, we now open the pseudoterminal slave in the
child, rather than the parent. This removes the second condition
(i.e. the parent no longer needs to close the slave fd) and I haven't
been able to reproduce the "unexpected EOF" with this.
This allows having multiple separate lockfiles for a single
project, which can be useful for testing against different versions of
nixpkgs; it also allows tracking custom input overrides for remote
flakes without requiring local clones of these flakes.
For example, if I want to build Nix against my locally pinned nixpkgs,
and have a lock file tracking this override independently of future
updates to said nixpkgs:
nix flake lock --output-lock-file /tmp/nix-flake.lock --override-input nixpkgs flake:nixpkgs
nix build --reference-lock-file /tmp/nix-flake.lock
Co-Authored-By: Will Fancher <elvishjerricco@gmail.com>
I saw this random failure in https://hydra.nixos.org/build/211811692:
error: opening /proc/15307/fd: No such process
while running nix-collect-garbage in a readfile-context.sh. This is
because we're not handling ESRCH errors reading /proc/<pid>/fd. So
just move the read inside the try/catch where we do handle it.
`nix copy` operations did not show progress. This is quite confusing.
Add a `progressSink` which displays the progress during `copyPaths`,
pretty much copied from `copyStorePath`.
Fixes https://github.com/NixOS/nix/issues/8000
This was causing random failures in tests/ca/substitute.ca: 'nix copy
--file ./content-addressed.nix' wouldn't get the default installable
'.' applied in InstallablesCommand::load(), so it would do nothing.
The curl download can outlive DrvOutputSubstitutionGoal (if some other
error occurs), so at shutdown setting the promise to an exception will
fail because 'this' is no longer valid in the callback. This can
manifest itself as a segfault, "corrupted double-linked list" or hang.
the term was hard to discover, as its definition and explanation were in
a very long document lacking an overview section.
search did not help because it occurs so often.
- clarify wording in the definition
- add an overview of installable types
- add "installable" to glossary
- link to definition from occurrences of the term
- be more precise about where store derivation outputs are processed
- installable Nix expressions must evaluate to a derivation
Co-authored-by: Adam Joseph <54836058+amjoseph-nixpkgs@users.noreply.github.com>
Presently when nix says something like:
```
these 486 paths will be fetched (511.54 MiB download, 6458.64 MiB unpacked):
...path1
...path2
...path3
...
...
...path486
```
It sorts path1, path2, path3, ..., path486 in lexicographic order of the
store path.
After this commit, nix will show path1, path2, path3, ..., path486 sorted by
StorePath name() (basically everything after the hash) rather than the store path.
This makes it easier to review what exactly is being downloaded at a glance,
especially when many paths need to be fetched.
We make sure the env var paths are actually set (ie. not "") before
sending them to the canonicalization function. If we forget to do so,
the user will end up facing a puzzled failed assertion internal error.
We issue a non-failing warning as a stop-gap measure. We could want to
revisit this to issue a detailed failing error message in the future.
Currently the valid key is only present when the path is invalid, which
makes checking path validity more complex than it should be. With this
change, the valid key can always be used to check if a path is valid
The release notes document the change in behavior, I don't include it
here so there is no risk to it getting out of sync.
> Motivation
>> Plumbing CLI should be simple
Store derivation installations are intended as "plumbing": very simple
utilities for advanced users and scripts, and not what regular users
interact with. (Similarly, regular Git users will use branch and tag
names not explicit hashes for most things.)
The plumbing CLI should prize simplicity over convenience; that is its
raison d'etre. If the user provides a path, we should treat it the same
way not caring what sort of path it is.
>> Scripting
This is especially important for the scripting use-case. when arbitrary
paths are sent to e.g. `nix copy` and the script author wants consistent
behavior regardless of what those store paths are. Otherwise the script
author needs to be careful to filter out `.drv` ones, and then run `nix
copy` again with those paths and `--derivation`. That is not good!
>> Surprisingly low impact
Only two lines in the tests need changing, showing that the impact of
this is pretty light.
Many command, like `nix log` will continue to work with just the
derivation passed as before. This because we used to:
- Special case the drv path and replace it with it's outputs (what this
gets rid of).
- Turn those output path *back* into the original drv path.
Now we just skip that entire round trip!
> Context
Issue #7261 lays out a broader vision for getting rid of `--derivation`,
and has this as one of its dependencies. But we can do this with or
without that.
`Installable::toDerivations` is changed to handle the case of a
`DerivedPath::Opaque` ending in `.drv`, which is new: it simply doesn't
need to do any extra work in that case. On this basis, commands like
`nix {show-derivation,log} /nix/store/...-foo.drv` still work as before,
as described above.
When testing older daemons, the post-build-hook will be run against the
old CLI, so we need the old version of the post-build-hook to support
that use-case.
Co-authored-by: Travis A. Everett <travis.a.everett@gmail.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Resolves#7437 for new `nix` commands only by adding a `--stdin` flag.
If paths are also passed on the cli they will be combined with the ones
from standard input.
Whenever a file conflict happens during "nix profile install" an error
is shown that was previously thrown inside builtins.buildEnv.
We catch BuildProfileConflictError here so that we can provide the user
with more useful instructions on what to do next.
Most notably, we give the user concrete commands to use with all
parameters already filled in. This avoids the need for the user to look
up these commands in manual pages.
At the moment an Error is thrown that only holds an error message
regarding `nix-env` and `nix profile`. These tools make use of
builtins.buildEnv, but buildEnv is also used in other places. These
places are unrelated to Nix profiles, so the error shouldn't mention
these tools.
This generic error is now BuildEnvFileConflictError, which holds more
contextual information about the files that were conflicting while
building the environment.
It would be incorrect to say that the `sourceInfo` has an `outPath`
that isn't the root. `sourceInfo` is about the root, whereas only
the flake may not be about the root. Thanks Eelco for pointing that
out.
It is independent of SourceExprCommand, which is about parsing
installables, except for the fact that parsing installables is one of
the many things influenced by read-only mode.
If this documentation is inaccurate in any way please do not hesitate to suggest corrections.
My understanding of this function is strictly from reading the source code and some limited experience implementing fetchers.
We are looking for *$ because it indicate that it was constructed with a new but
not release. De-referencing shallow copy so deleting as whole might create
dangling pointer that's why we move it so we delete a empty containers + the
nice perf boost.
Nixpkgs on aarch64-linux is currently stuck on GCC 9
(https://github.com/NixOS/nixpkgs/issues/208412) and using gcc11Stdenv
doesn't work either.
So use c++2a instead of c++20 for now. Unfortunately this means we
can't use some C++20 features for now (like std::span).
Descriptions for commandline flags may not include newlines and should
be rather short for display in a shell. Truncate the description string
of a flag on '\n' or '.' to and add an ellipsis if needed.
XDG Base Directory is a standard for locations for storing various
files. Nix has a few files which seem to fit in the standard, but
currently use a custom location directly in the user's ~, polluting
it:
- ~/.nix-profile
- ~/.nix-defexpr
- ~/.nix-channels
This commit adds a config option (use-xdg-base-directories) to follow
the XDG spec and instead use the following locations:
- $XDG_STATE_HOME/nix/profile
- $XDG_STATE_HOME/nix/defexpr
- $XDG_STATE_HOME/nix/channels
If $XDG_STATE_HOME is not set, it is assumed to be ~/.local/state.
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
Co-authored-by: Tim Fenney <kodekata@gmail.com>
Co-authored-by: pasqui23 <pasqui23@users.noreply.github.com>
Co-authored-by: Artturin <Artturin@artturin.com>
Co-authored-by: John Ericson <Ericson2314@Yahoo.com>
Fixes#3898
The entire `BinaryCaches` row used to get replaced after it became
stale according to the `timestamp` column. In a concurrent scenario,
this leads to foreign key conflicts as different instances of the
in-process `state.caches` cache now differ, with the consequence that
the older process still tries to use the `id` number of the old record.
Furthermore, this phenomenon appears to have caused the cache for
actual narinfos to be erased about every week, while the default
ttl for narinfos was supposed to be 30 days.
This is slightly more accurate considering that an outdated record
may exist in the persistent cache. Possibly-outdated records are
quite relevant as they may be foreign keys to more recent information
that we want to keep, but we will not return them here.
In unprivileged podman containers, /proc is not fully visible (there
are other filesystems mounted on subdirectories of /proc). Therefore
we can't mount a new /proc in the sandbox that matches the PID
namespace of the sandbox. So this commit automatically disables
sandboxing if /proc is not fully visible.
This didn't work because sandboxing doesn't work in Docker. However,
the sandboxing check is done lazily - after clone(CLONE_NEWNS) fails,
we retry with sandboxing disabled. But at that point, we've already
done UID allocation under the assumption that user namespaces are
enabled.
So let's get rid of the "goto fallback" logic and just detect early
whether user / mount namespaces are enabled.
This commit also gets rid of a compatibility hack for some ancient
Linux kernels (<2.13).
Previously we would completely refetch the submodules from the
network, even though the repo might already have them. Now we copy the
.git/modules directory from the repo as an optimisation. This speeds
up evaluating
builtins.fetchTree { type = "git"; url = "/path/to/blender"; submodules = true; }
(where /path/to/blender already has the needed submodules) from 121s
to 57s.
This is still pretty inefficient and a hack, but a better solution is
best done on the lazy-trees branch.
This change also help in the case where the repo already has the
submodules but the origin is unfetchable for whatever reason
(e.g. there have been cases where Nix in a GitHub action doesn't have
the right authentication set up).
We cannot use 'actualUrl', because for file:// repos that's not the
original URL that the repo was fetched from. This is a problem since
submodules may be relative to the original URL.
Fixes e.g.
nix eval --impure --json --expr 'builtins.fetchTree { type = "git"; url = "/path/to/blender"; submodules = true; }'
where /path/to/blender is a clone of
https://github.com/blender/blender.git (which has several relative
submodules like '../blender-addons.git').
Previously, build-remote would show a warning if all build slots were
taken, even if they would open up later. This caused a lot of spam in
the logs. Disable this warning when maxJobs > 0.
See #6263
Per the old FIXME, this flag was on too many commands, and mostly
ignored. Now it is just on the commands where it actually has an effect.
Per https://github.com/NixOS/nix/issues/7261, I would still like to get
rid of it entirely, but that is a separate project. This change should
be good with or without doing that.
`nix app` had something called `InstallableDerivedPath` which is
actually the same thing. We go with the later's name because it has
become more correct.
I originally did this change (more hurriedly) as part of #6225 --- a
mini store-only Nix and a full Nix need to share this code. In the first
RFC meeting for https://github.com/NixOS/rfcs/pull/134 we discussed how
some splitting of the massive `installables.cc` could begin prior, as
that is a good thing anyways. (@edolstra's words, not mine!) This would
be one such PR.
tl;dr: With this 1 line change I was able to get a speedup of 1.5x on 1Gbit/s
wan connections by enabling zstd compression in nginx.
Also nix already supported all common compression format for http
transfer, webservers usually only enable them if they are advertised
through the Accept-Encoding header.
This pull requests makes nix advertises content compression support for
zstd, br, gzip and deflate.
It's particular useful to add transparent compression for binary caches
that serve packages from the host nix store in particular nix-serve,
nix-serve-ng and harmonia.
I tried so far gzip, brotli and zstd, whereas only zstd was able to bring
me performance improvements for 1Gbit/s WAN connections.
The following nginx configuration was used in combination with the
[zstd module](https://github.com/tokers/zstd-nginx-module) and
[harmonia](https://github.com/nix-community/harmonia/)
```nix
{
services.nginx.virtualHosts."cache.yourhost.com" = {
locations."/".extraConfig = ''
proxy_pass http://127.0.0.1:5000;
proxy_set_header Host $host;
proxy_redirect http:// https://;
proxy_http_version 1.1;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection $connection_upgrade;
zstd on;
zstd_types application/x-nix-archive;
'';
};
}
```
For testing I unpacked a linux kernel tarball to the nix store using
this command `nix-prefetch-url --unpack https://cdn.kernel.org/pub/linux/kernel/v6.x/linux-6.1.8.tar.gz`.
Before:
```console
$ nix build && rm -rf /tmp/hello && time ./result/bin/nix copy --no-check-sigs --from https://cache.thalheim.io --to 'file:///tmp/hello?compression=none' '/nix/store/j42mahch5f0jvfmayhzwbb88sw36fvah-linux-6.1.8.tar.gz'
warning: Git tree '/scratch/joerg/nix' is dirty
real 0m18,375s
user 0m2,889s
sys 0m1,558s
```
After:
```console
$ nix build && rm -rf /tmp/hello && time ./result/bin/nix copy --no-check-sigs --from https://cache.thalheim.io --to 'file:///tmp/hello?compression=none' '/nix/store/j42mahch5f0jvfmayhzwb
b88sw36fvah-linux-6.1.8.tar.gz'
real 0m11,884s
user 0m4,130s
sys 0m1,439s
```
Signed-off-by: Jörg Thalheim <joerg@thalheim.io>
Update src/libstore/filetransfer.cc
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
These settings are not needed for libstore at all, they are just used by
the nix daemon *command* for authorization on unix domain sockets. My
moving them to a new configuration struct just in that file, we avoid
them leaking anywhere else.
Also, it is good to break up the mammoth `Settings` struct in general.
Issue #5638 tracks this.
The message is not changed because I do not want to regress in
convenience to the user. Just saying "this connection is not trusted"
doesn't tell them out to fix the issue. The ideal thing to do would be
to somehow parameterize `processCommand` on how the error should be
displayed, so different sorts of connections can display different
information to the user based on how authentication is performed for the
connection in question. This, however, is a good bit more work, so it is
left for the future.
This came up with me thinking about the tcp:// store (#5265). The larger
project is not TCP *per se*, but the idea that it should be possible for
something else to manage access control to services like the Nix Daemon,
and those services simply trust or trust the incoming connection as they
are told. This is a more capability-oriented way of thinking about trust
than "every server implements its own auth separately" as we are used to today.
Its very great that libstore itself already implements just this model,
and so via this refactor I basically want to "enshrine" that so it
continues to be the case.
With the switch to C++20, the rules became more strict, and we can no
longer initialize base classes. Make them comments instead.
(BTW
https://www.open-std.org/jtc1/sc22/wg21/docs/papers/2021/p2287r1.html
this offers some new syntax for this use-case. Hopefully this will be
adopted and we can eventually use it.)
I don't think the `narHash` is in need of documentation more than the
other undocumented fields, but regardless this change has nothing to do
with that field and so we should leave the comment as is.
`&` without space before is far more common on this codebase than I
thought, so it is not worth changing just this one file. Maybe we will
adopt a formatter someday but until then this is fine.
For frameworks it's important that structures are as lazy as possible
to prevent infinite recursions, performance issues and errors that
aren't related to the thing to evaluate. As a consequence, they have
to emit more attributes than strictly (sic) necessary.
However, these attributes with empty values are not useful to the user
so we omit them.
The references set seems to have been unused since `LegacySSHStore`
references were first created in
caa5793b4a.
The method decls never were upstream, and accidentally added by me in
062533f7cd (probably due to `git rerere`).
Sorry!
This reduces the diff from #3746.
No other getDefaultFlakeAttrPaths implementation has this trailing dot,
and the dot can show up in error messages like:
error: flake '...' does not provide attribute 'packages.x86_64-linux.', ...
- Clarify doc comments, Installables::getCursors returns non-empty
vector
- Use vector::at in Installable::getCursor instead of checking for empty
vector and throwing an exception with error message.
Handle the case where none of getActualAttrPaths() actually exists,
in which case instead of returning an empty vector.
This fixes the case where the user misspells the attribute name in nix
search. Instead of getting no search results, now it shows an error with
suggestions.
Also remove InstallableFlake::getCursor() override since it's now
equivalent to the base class version.
Avoid needless work and throwing away invariants.
These conversions date back to when `StorePath` was in Rust and there
were issues with it missing utility methods.
Previously, getDefaultNixPath was called too early: at initialisation
time, before CLI and config have been processed, when `restrictEval` and
`pureEval` both have their default value `false`. Call it when
initialising the EvalState instead, and use `setDefault`.
clangStdenv compiles with a single warning:
```
warning: destructor called on non-final 'nix::PosAdapter' that has virtual functions but non-virtual destructor [-Wdelete-non-abstract-non-virtual-dtor]
```
This fixes the warning by making the destructor of PosAdapter virtual,
deffering to the correct destructor from the concrete child classes.
This has no impact in the end, as none of these classes have specific
destructors.
Technicaly, it may be faster not to have this indirection, but as per
the warning, there is only one place where we have to delete abstract
PosAdapter values.
Not worth bikesheding I guess.
Allows checking directory entry type of a single file/directory.
This was added to optimize the use of `builtins.readDir` on some
filesystems and operating systems which cannot detect this information
using POSIX's `readdir`.
Previously `builtins.readDir` would eagerly use system calls to lookup
these filetypes using other interfaces; this change makes these
operations lazy in the attribute values for each file with application
of `builtins.readFileType`.
We had some local variables left over from the older (more
complicated) implementation of this function. They should all be unused,
but one wasn't by mistake.
Delete them all, and replace the one that was still in use as intended.
It's used as the “system” profile in a bunch of places, so better not
touch it. Besides, it doesn't hurt to keep it since it's owned by root
any way, so it doesn't have the `chown` problem that the user profiles
had and that led to wanting to move them on the client-side.
Rather than using `/nix/var/nix/{profiles,gcroots}/per-user/`, put the user
profiles and gcroots under `$XDG_DATA_DIR/nix/{profiles,gcroots}`.
This means that the daemon no longer needs to manage these paths itself
(they are fully handled client-side). In particular, it doesn’t have to
`chown` them anymore (removing one need for root).
This does change the layout of the gc-roots created by nix-env, and is
likely to break some stuff, so I’m not sure how to properly handle that.
Originally there was no `path-info.*`, then there was `path-info.hh`,
then there was `path-info.cc`, but only for new things. Moving this
stuff over makes everything consistent.
Instead of needing to run `nix show-config --json | jq -r
'."warn-dirty".value'` to view the value of `warn-dirty`, you can now
run `nix show-config warn-dirty`.
This should be a non-empty set, and so we don't want people doing this
by accident. We remove the zero-0 constructor with a little inheritance
trickery.
`DerivedPath::Built` and `DerivationGoal` were previously using a
regular set with the convention that the empty set means all outputs.
But it is easy to forget about this rule when processing those sets.
Using `OutputSpec` forces us to get it right.
It appears that on current macOS versions, our use of poll() to detect
client disconnects no longer works. As a workaround, poll() for
POLLRDNORM, since this *will* wake up when the client has
disconnected. The downside is that it also wakes up when input is
available. So just sleep for a bit in that case. This means that on
macOS, a client disconnect may take up to a second to be detected,
but that's better than not being detected at all.
Fixes#7584.
This way the links are clearly within the manual (ie not absolute paths),
while allowing snippets to reference the documentation root reliably,
regardless of at which base url they're included.
Prior to this change, we had a bunch of ad-hoc string manipulation code
scattered around. This made it hard to figure out what data model for
string contexts is.
Now, we still store string contexts most of the time as encoded strings
--- I was wary of the performance implications of changing that --- but
whenever we parse them we do so only through the
`NixStringContextElem::parse` method, which handles all cases. This
creates a data type that is very similar to `DerivedPath` but:
- Represents the funky `=<drvpath>` case as properly distinct from the
others.
- Only encodes a single output, no wildcards and no set, for the
"built" case.
(I would like to deprecate `=<path>`, after which we are in spitting
distance of `DerivedPath` and could maybe get away with fewer types, but
that is another topic for another day.)
macOS doesn't have user namespacing, so the gid of the builder needs
to be nixbld. The logic got "has sandboxing enabled" confused with
"has user namespaces".
Fixes#7529.
This basically reverts 6e5165b773.
It fixes errors like
sandbox-exec: <internal init prelude>:292:47: unable to open sandbox-minimal.sb: not found
when trying to run a development Nix installed in a user's home
directory.
Also, we're trying to minimize the number of installed files
to make it possible to deploy Nix as a single statically-linked
binary.
Adds a new boolean structured attribute
`outputChecks.<output>.unsafeDiscardReferences` which disables scanning
an output for runtime references.
__structuredAttrs = true;
outputChecks.out.unsafeDiscardReferences = true;
This is useful when creating filesystem images containing their own embedded Nix
store: they are self-contained blobs of data with no runtime dependencies.
Setting this attribute requires the experimental feature
`discard-references` to be enabled.
Previously addTempRoot() acquired the LocalStore state lock and waited
for the garbage collector to reply. If the garbage collector is in the
same process (as it the case with auto-GC), this would deadlock as
soon as the garbage collector thread needs the LocalStore state lock.
So now addTempRoot() uses separate Syncs for the state that it
needs. As long at the auto-GC thread doesn't call addTempRoot() (which
it shouldn't), it shouldn't deadlock.
Fixes#3224.
This also moves the file handle into its own Sync object so we're not
holding the _state while acquiring the file lock. There was no real
deadlock risk here since locking a newly created file cannot block,
but it's still a bit nicer.
This has the same goal as b13fd4c58e81b2b2b0d72caa5ce80de861622610,but
achieves it in a different way in order to not break
`nix why-depends --derivation`.
In principle, this should avoid deadlocks where two instances of Nix are
holding a shared lock on big-lock and are both waiting to get an
exclusive lock.
However, it seems like `flock(2)` is supposed to do this automatically,
so it's not clear whether this is actually where the problem comes from.
This makes 'nix develop' set the Linux personality in the same way
that the actual build does, allowing a command like 'nix develop
nix#devShells.i686-linux.default' on x86_64-linux to work correctly.
Without this, the error is lost, and it makes for a hard to debug
situation. Also remove some of the busyness inside the sqlite_open_v2
args.
The errcode returned is not the extended one. The only way to make open
return an extended code, would be to add SQLITE_OPEN_EXRESCODE to the
flags. In the future it might be worth making this change,
which would also simplify the existing SQLiteError code.
This makes 'nix build' work on paths (which will be copied to the
store) and store paths (returned as is). E.g. the following flake
output attributes can be built using 'nix build .#foo':
foo = ./src;
foo = self.outPath;
foo = builtins.fetchTarball { ... };
foo = (builtins.fetchTree { .. }).outPath;
foo = builtins.fetchTree { .. } + "/README.md";
foo = builtins.storePath /nix/store/...;
Note that this is potentially risky, e.g.
foo = /.;
will cause Nix to try to copy the entire file system to the store.
What doesn't work yet:
foo = self;
foo = builtins.fetchTree { .. };
because we don't handle attrsets with an outPath attribute in it yet,
and
foo = builtins.storePath /nix/store/.../README.md;
since result symlinks have to point to a store path currently (rather
than a file inside a store path).
Fixes#7417.
They did not include the detailed error message, losing essential
information for troubleshooting.
Example message:
warning: creating statement 'insert or rplace into NARs(cache, hashPart, namePart, url, compression, fileHash, fileSize, narHash, narSize, refs, deriver, sigs, ca, timestamp, present) values (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, 1)': at offset 10: SQL logic error, near "rplace": syntax error (in '/tmp/nix-shell.grQ6f7/nix-test/tests/binary-cache/test-home/.cache/nix/binary-cache-v6.sqlite')
It's not the best example; more important information will be in
the message for e.g. a constraint violation.
I don't see why this specific error is printed as a warning, but
that's for another commit.
Unsetting `build-users-group` (without `auto-allocate-uids` enabled)
gives the following error:
```
src/libstore/lock.cc:25: static std::unique_ptr<nix::UserLock> nix::SimpleUserLock::acquire(): Assertion `settings.buildUsersGroup != ""' failed.
```
Fix the logic in `useBuildUsers` and document the default value
for `build-users-group`.
This makes the position object used in exceptions abstract, with a
method getSource() to get the source code of the file in which the
error originated. This is needed for lazy trees because source files
don't necessarily exist in the filesystem, and we don't want to make
libutil depend on the InputAccessor type in libfetcher.
Make everything be in the form "while ..." (most things were already),
and in particular *don't* use other propositions that must go after or
before specific "while ..." clauses to make sense.
When debugging nix expressions the outermost trace tends to be more useful
than the innermost. It is therefore printed last to save developers from
scrolling.
We used to set enforceDeterminism to true in the settings (by default)
and thus did send a non-zero value over the wire. The value should
probably be ignored as it should only matter if nrRounds is non-zero
as well.
Having the old code here where the value is expected to be zero only
works with the same version of Nix where we are sending zero. We
should always test this against older Nix versions being client or
server as otherwise upgrade in larger networks might be a pain.
Fixes 8e0946e8df
Fix#6209
When trying to run `nix log <installable>`, try first to resolve the derivation pointed to
by `<installable>` as it is the resolved one that holds the build log.
This has a couple of shortcomings:
1. It’s expensive as it requires re-reading the derivation
2. It’s brittle because if the derivation doesn’t exist anymore or can’t
be resolved (which is the case if any one of its build inputs is missing),
then we can’t access the log anymore
However, I don’t think we can do better (at least not right now).
The alternatives I see are:
1. Copy the build log for the un-resolved derivation. But that means a
lot of duplication
2. Store the results of the resolving in the db. Which might be the best
long-term solution, but leads to a whole new class of potential
issues.
These only functioned if a very narrow combination of conditions held:
- The result path does not yet exist (--check did not result in
repeated builds), AND
- The result path is not available from any configured substituters, AND
- No remote builders that can build the path are available.
If any of these do not hold, a derivation would be built 0 or 1 times
regardless of the repeat option. Thus, remove it to avoid confusion.
The old way was not correct.
Here is an example:
```
$ nix-instantiate --eval --expr 'let x = a: throw "asdf"; in x 1' --show-trace
error: asdf
… while evaluating 'x'
at «string»:1:9:
1| let x = a: throw "asdf"; in x 1
| ^
… from call site
at «string»:1:29:
1| let x = a: throw "asdf"; in x 1
| ^
```
and yet also:
```
$ nix-instantiate --eval --expr 'let x = a: throw "asdf"; in x' --show-trace
<LAMBDA>
```
Here is the thing: in both cases we are evaluating `x`!
Nix is a higher-order languages, and functions are a sort of value. When
we write `x = a: ...`, `a: ...` is the expression that `x` is being
defined to be, and that is already a value. Therefore, we should *never*
get an trace that says "while evaluating `x`", because evaluating `a:
...` is *trival* and nothing happens during it!
What is actually happening here is we are applying `x` and evaluating
its *body* with arguments substituted for parameters. I think the
simplest way to say is just "while *calling* `x`", and so that is what I
changed it to.
We need to close the GC server socket before shutting down the active
GC client connections, otherwise a client may (re)connect and get
ECONNRESET. But also handle ECONNRESET for resilience.
Fixes random failures like
GC socket disconnected
connecting to '/tmp/nix-shell.y07M0H/nix-test/default/var/nix/gc-socket/socket'
sending GC root '/tmp/nix-shell.y07M0H/nix-test/default/store/kb5yzija0f1x5xkqkgclrdzldxj6nnc6-non-blocking'
reading GC root from client: error: unexpected EOF reading a line
1 store paths deleted, 0.00 MiB freed
error: reading from file: Connection reset by peer
in gc-non-blocking.sh.
It calls strlen() on the input (rather than simply copying at most
`size` bytes), which can fail if the input is not zero-terminated and
is inefficient in any case.
Fixes#7347.
why-depends assumed that we knew the output path of the second argument.
For CA derivations, we might not know until it's built. One way to solve
this would be to build the second installable to get the output path.
In this case we don't need to, though. If the first installable (A)
depends on the second (B), then getting the store path of A will
necessitate having the store path B. The contrapositive is, if the store
path of B is not known (i.e. it's a CA derivation which hasn't been
built), then A does not depend on B.
We shouldn't skip this if the supplementary group list is empty,
because then the sandbox won't drop the supplementary groups of the
parent (like "root").
The new experimental feature 'cgroups' enables the use of cgroups for
all builds. This allows better containment and enables setting
resource limits and getting some build stats.
It occurred when a output of the dependency was already available,
so it didn't need rebuilding and didn't get added to the
inputDrvOutputs.
This process-related info wasn't suitable for the purpose of finding
the actual input paths for the builder. It is better to do this in
absolute terms by querying the store.
This change is needed to support aws-sdk-cpp 1.10 and newer.
I opted not to make this dependent on the sdk version because
the crt dependency has been in the interface of the older
sdk as well, and it was only coincidence that libstore didn't
make use of any privately defined symbols directly.
When calling `builtins.readFile` on a store path, the references of that
path are currently added to the resulting string's context.
This change makes those references the *possible* context of the string,
but filters them to keep only the references whose hash actually appears
in the string, similarly to what is done for determining the runtime
references of a path.
Cgroups are now only used for derivations that require the uid-range
range feature. This allows auto UID allocation even on systems that
don't have cgroups (like macOS).
Also, make things work on modern systems that use cgroups v2 (where
there is a single hierarchy and no "systemd" controller).
after discussing this with multiple people, I'm convinced that "build
task" is more precise: a derivation is not an action, but inert until it
is built. also it's easier to pronounce.
proposal: use "build task" for the generic concept "description of how
to derive new files from the contents of existing files". then it will
be easier to distinguish what we mean by "derivation" (a specific data
structure and Nix language value type) and "store derivation" (a
serialisation of a derivation into a file in the Nix store).
readline is not re-entrant, so entering the debugger from the
completioncallback results in an eventual segfault.
The workaround is to temporarily disable the debugger when searching
for possible completions.
Call it as `['nix', '__build-remote', ... ]` rather than the previous
`["__build-remote", "nix __build-remote", ... ]` which seemed to have
been most likely unintended
The description of the --profile option talks about the "update" operation.
This is probably meant for operations such as "nix profile install", but the
same option is reused in other subcommands, which do not update the profile,
such as "nix profile {list,history,diff-closures}".
We update the description to make sense in both contexts.
Currently, Nix passes `-a` when it runs commands on a remote machine via
SSH, which disables agent forwarding. This causes issues when the
`ForwardAgent` option is set in SSH config files, as the command line
operation always overrides those.
In particular, this causes issues if the command being run is `sudo`
and the remote machine is configured with the equivalent of NixOS's
`security.pam.enableSSHAgentAuth` option. Not allowing SSH agent
forwarding can cause authentication to fail unexpectedly.
This can currently be worked around by setting `NIX_SSHOPTS="-A"`, but
we should defer to the options in the SSH config files to be least
surprising for users.
* Clarify the documentation of foldl': That the arguments are forced
before application (?) of `op` is necessarily true. What is important
to stress is that we force every application of `op`, even when the
value turns out to be unused.
* Move the example before the comment about strictness to make it less
confusing: It is a general example and doesn't really showcase anything
about foldl' strictness.
* Add test cases which nail down aspects of foldl' strictness:
* The initial accumulator value is not forced unconditionally.
* Applications of op are forced.
* The list elements are not forced unconditionally.
After we've send "\2\n" to the parent, we can't send a serialized
exception anymore. It will show up garbled like
$ nix-build --store /tmp/nix --expr 'derivation { name = "foo"; system = "x86_64-linux"; builder = "/foo/bar"; }'
this derivation will be built:
/nix/store/xmdip0z5x1zqpp6gnxld3vqng7zbpapp-foo.drv
building '/nix/store/xmdip0z5x1zqpp6gnxld3vqng7zbpapp-foo.drv'...
ErrorErrorEexecuting '/foo/bar': No such file or directory
error: builder for '/nix/store/xmdip0z5x1zqpp6gnxld3vqng7zbpapp-foo.drv' failed with exit code 1
While trying to use an alternate directory for my Nix installation, I
noticed that nix's output didn't reflect the updated state
directory. This patch corrects that and now prints the warning before
attempting to create the directory (if the directory creation fails,
it wouldn't have been obvious why nix was attempting to create the
directory in the first place).
With this patch, I now get the following warning:
warning: '/home/deck/.var/app/org.nixos.nix/var/nix' does not
exist, so Nix will use '/home/deck/.local/share/nix/root' as a
chroot store
The documentation for `parseDrvName` does not agree with the implementation when
the derivation name contains a dash which is followed by something that is
neither a letter nor a digit. This commit corrects the documentation to agree
with the implementation.
If we don't have any github token, we won't be able to fetch private
repos, but we are also more likely to run into API limits since
we don't have a token. To mitigate this only ever use the github api
if we actually have a token.
The current definition of `intersectAttrs` is incorrect:
> Return a set consisting of the attributes in the set e2 that also exist in the
> set e1.
Recall that (Nix manual, section 5.1):
> An attribute set is a collection of name-value-pairs (called attributes)
According to the existing description of `intersectAttrs`, the following should
evaluate to the empty set, since no key-value *pair* (i.e. attribute) exists in
both sets:
```
builtins.intersectAttrs { x=3; } {x="foo";}
```
And yet:
```
nix-repl> builtins.intersectAttrs { x=3; } {x="foo";}
{ x = "foo"; }
```
Clearly the intent here was for the *names* of the resulting attribute set to be
the intersection of the *names* of the two arguments, and for the values of the
resulting attribute set to be the values from the second argument.
This commit corrects the definition, making it match the implementation and intent.
Make sure that people who run Nix in non-interactive mode (and so don't have the possibility to interactively accept the individual flake configuration settings) are aware of this flag.
Fix#7086
These settings seem harmless, they control the same polling
functionality that timeout does, but with different behavior. Should
be safe for untrusted users to pass in.
I just had a colleague get confused by the previous phrase for good
reason. "valid" sounds like an *objective* criterion, e.g. and *invalid
signature* would be one that would be trusted by no one, e.g. because it
misformatted or something.
What is actually going is that there might be a signature which is
perfectly valid to *someone else*, but not to the user, because they
don't trust the corresponding public key. This is a *subjective*
criterion, because it depends on the arbitrary and personal choice of
which public keys to trust.
I therefore think "trustworthy" is a better adjective to use. Whether
something is worthy of trust is clearly subjective, and then "trust"
within that word nicely evokes `trusted-public-keys` and friends.
The history is not critical to the functionality of nix repl, so it's
enough to warn here, rather than refuse to start if the directory Nix
thinks the history should live in can't be created.
- call close explicitly in writeFile to prevent the close exception
from being ignored
- fsync after writing schema file to flush data to disk
- fsync schema file parent to flush metadata to disk
https://github.com/NixOS/nix/issues/7064
Remove the `verify TLS: Nix CA file = 'blah'` message that Nix used to print when fetching anything as it's both useless (`libcurl` prints the same info in its logs) and misleading (gives the impression that a new TLS connection is being established which might not be the case because of multiplexing. See #7011 )
This commit adds an optional `__impure` parameter to fetchurl.nix, which allows
the caller to use `libfetcher`'s fetcher in an impure derivation. This allows
nixpkgs' patch-normalizing fetcher (fetchpatch) to be rewritten to use nix's
internal fetchurl, thereby eliminating the awkward "you can't use fetchpatch
here" banners scattered all over the place.
See also: https://github.com/NixOS/nixpkgs/pull/188587
Implements the approach suggested by feedback on PR #6994, where
tempdir paths are created in the store (now with an exclusive lock).
As part of this work, the currently-broken and unused
`createTempDirInStore` function is updated to create an exclusive lock
on the temp directory in the store.
The GC now makes a non-blocking attempt to lock any store directories
that "look like" the temp directories created by this function, and if
it can't acquire one, ignores the directory.
Stdenv sets this to a bash that doesn't have readline/completion
support, so running 'nix (develop|shell)' inside a 'nix develop' gives
you a crippled shell. So let's just ignore the derivation's $SHELL.
This could break interactive use of build phases that use $SHELL, but
they appear to be fairly rare.
Disables the SA_RESTART behavior on macOS which causes:
> Restarting of pending calls is requested by setting the SA_RESTART bit
> in sa_flags. The affected system calls include read(2), write(2),
> sendto(2), recvfrom(2), sendmsg(2) and recvmsg(2) on a communications
> channel or a slow device (such as a terminal, but not a regular file)
> and during a wait(2) or ioctl(2).
From: https://man.openbsd.org/sigaction#SA_RESTART
This being set on macOS caused a bug where read() calls to the daemon
socket were blocking after a SIGINT was received. As a result,
checkInterrupt was never reached even though the signal was received
by the signal handler thread.
On Linux, SA_RESTART is disabled by default. This probably effects
other BSDs but I don’t have the ability to test it there right now.
readDerivation is pretty slow, and while it may not be significant for
some use cases, on things like ghc-nix where we have thousands of
derivations is really slows things down.
So, this just doesn’t do the impure derivation check if the impure
derivation experimental feature is disabled. Perhaps we could cache
the result of isPure() and keep the check, but this is a quick fix to
for the slowdown introduced with impure derivations features in 2.8.0.
this simplifies the setup a lot, and avoids weird looking `./file.md`
links showing up.
it also does not show regular URLs any more. currently the command
reference only has few of them, and not showing them in the offline
documentation is hopefully not a big deal.
instead of building more special-case solutions, clumsily preprocessing
the input, or issuing verbal rules on dealing with URLs, should better
be solved sustainably by not rendering relative links in `lowdown`:
https://github.com/kristapsdz/lowdown/issues/105
This was caused by -L calling setLogFormat() again, which caused the
creation of a new progress bar without destroying the old one. So we
had two progress bars clobbering each other.
We should change 'logger' to be a smart pointer, but I'll do that in a
future PR.
Fixes#6931.
98e361ad4c introduced a regression where
previously stored attributes were replaced by placeholders. As a
result, a command like 'nix build nixpkgs#hello' had to be executed at
least twice to get caching.
This code does not seem necessary for suggestions to work.
This issue made it impossible for clients using a serve protocol of
version <= 2.3 to use the `cmdBuildDerivation` command of servers using
a protocol of version >= 2.6. The faulty version check makes the server
send back build outputs that the client is not expecting.
This hang for some reason didn't trigger in the Nix build, but did
running 'make installcheck' interactively. What happened:
* Store::addMultipleToStore() calls a SinkToSource object to copy a
path, which in turn calls LegacySSHStore::narFromPath(), which
acquires a connection.
* The SinkToSource object is not destroyed after the last bytes has
been read, so the coroutine's stack is still alive and its
destructors are not run. So the connection is not released.
* Then when the next path is copied, because max-connections = 1,
LegacySSHStore::narFromPath() hangs forever waiting for a connection
to be released.
The fix is to make sure that the source object is destroyed when we're
done with it.
Makes `printValueAsJSON` not copy paths to the store for `nix eval
--json`, `nix-instantiate --eval --json` and `nix-env --json`.
Fixes https://github.com/NixOS/nix/issues/5612
RewritingSink can handle being fed input where a reference crosses a
chunk boundary. we don't need to load the whole source into memory, and
in fact *not* loading the whole source lets nix build FODs that do not
fit into memory (eg fetchurl'ing data files larger than system memory).
Some activities are numerous but usually very short (e.g. copying a
source file to the store) which would cause a lot of flickering. So
only show activities that have been running for at least 10 ms.
Rather than directly copying the source to its dest, copy it first to a
temporary location, and eventually move that temporary.
That way, the move is at least atomic from the point-of-view of the destination
The recursive copy from the stl doesn’t exactly do what we need because
1. It doesn’t delete things as we go
2. It doesn’t keep the mtime, which change the nars
So re-implement it ourselves. A bit dull, but that way we have what we want
In `nix::rename`, if the call to `rename` fails with `EXDEV` (failure
because the source and the destination are in a different filesystems)
switch to copying and removing the source.
To avoid having to re-implement the copy manually, I switched the
function to use the c++17 `filesystem` library (which has a `copy`
function that should do what we want).
Fix#6262
Once a derivation goal has been completed, we check whether or not
this goal was meant to be repeated to check its output.
An early return branch was preventing the worker to reach that repeat
code branch, hence breaking the --check command (#2619).
It seems like this early return branch is an artifact of a passed
refactoring. As far as I can tell, buildDone's main branch also
cleanup the tmp directory before returning.
By default, Nix sets the "cores" setting to the number of CPUs which are
physically present on the machine. If cgroups are used to limit the CPU
and memory consumption of a large Nix build, the OOM killer may be
invoked.
For example, consider a GitLab CI pipeline which builds a large software
package. The GitLab runner spawns a container whose CPU is limited to 4
cores and whose memory is limited to 16 GiB. If the underlying machine
has 64 cores, Nix will invoke the build with -j64. In many cases, that
level of parallelism will invoke the OOM killer and the build will
completely fail.
This change sets the default value of "cores" to be
ceil(cpu_quota / cpu_period), with a fallback to
std:🧵:hardware_concurrency() if cgroups v2 is not detected.
The workaround for "Some distros patch Linux" mentioned in
local-derivation-goal.cc will not help in the `--option
sandbox-fallback false` case. To provide the user more helpful
guidance on how to get the sandbox working, let's check to see if the
`/proc` node created by the aforementioned patch is present and
configured in a way that will cause us problems. If so, give the user
a suggestion for how to troubleshoot the problem.
local-derivation-goal.cc contains a comment stating that "Some distros
patch Linux to not allow unprivileged user namespaces." Let's give a
pointer to a common version of this patch for those who want more
details about this failure mode.
This commit causes nix to `warn()` if sandbox setup has failed and
`/proc/self/ns/user` does not exist. This is usually a sign that the
kernel was compiled without `CONFIG_USER_NS=y`, which is required for
sandboxing.
This commit uses `warn()` to notify the user if sandbox setup fails
with errno==EPERM and /proc/sys/user/max_user_namespaces is missing or
zero, since that is at least part of the reason why sandbox setup
failed.
Note that `echo -n 0 > /proc/sys/user/max_user_namespaces` or
equivalent at boot time has been the recommended mitigation for
several Linux LPE vulnerabilities over the past few years. Many users
have applied this mitigation and then forgotten that they have done
so.
The failure modes for nix's sandboxing setup are pretty complicated.
When nix is unable to set up the sandbox, let's provide more detail
about what went wrong. Specifically:
* Make sure the error message includes the word "sandbox" so the user
knows that the failure was related to sandboxing.
* If `--option sandbox-fallback false` was provided, and removing it
would have allowed further attempts to make progress, let the user
know.
I recently got fairly confused why the following expression didn't have
any effect
{
description = "Foobar";
inputs.sops-nix = {
url = github:mic92/sops-nix;
inputs.nixpkgs_22_05.follows = "nixpkgs";
};
}
until I found out that the input was called `nixpkgs-22_05` (please note
the dash vs. underscore).
IMHO it's not a good idea to not throw an error in that case and
probably leave end-users rather confused, so I implemented a small check
for that which basically checks whether `follows`-declaration from
overrides actually have corresponding inputs in the transitive flake.
In fact this was done by accident already in our own test-suite where
the removal of a `follows` was apparently forgotten[1].
Since the key of the `std::map` that holds the `overrides` is a vector
and we have to find the last element of each vector (i.e. the override)
this has to be done with a for loop in O(n) complexity with `n` being
the total amount of overrides (which shouldn't be that large though).
Please note that this doesn't work with nested expressions, i.e.
inputs.fenix.inputs.nixpkgs.follows = "...";
which is a known problem[2].
For the expression demonstrated above, an error like this will be
thrown:
error: sops-nix has a `follows'-declaration for a non-existant input nixpkgs_22_05!
[1] 2664a216e5
[2] https://github.com/NixOS/nix/issues/5790
Defers completion of flake inputs until the whole command line is parsed
so that we know what flakes we need to complete the inputs of.
Previously, `nix build flake --update-input <Tab>` always behaved like
`nix build . --update-input <Tab>`.
Prevents errors when running with UBSan:
/nix/store/j5vhrywqmz1ixwhsmmjjxa85fpwryzh0-gcc-11.3.0/include/c++/11.3.0/bits/stl_pair.h:353:4: runtime error: load of value 229, which is not a valid value for type 'AttrType'
Specifically, if we're not root and the daemon socket does not exist,
then we use ~/.local/share/nix/root as a chroot store. This enables
non-root users to download nix-static and have it work out of the box,
e.g.
ubuntu@ip-10-13-1-146:~$ ~/nix run nixpkgs#hello
warning: '/nix' does not exists, so Nix will use '/home/ubuntu/.local/share/nix/root' as a chroot store
Hello, world!
With this, Nix will write a copy of the sandbox shell to /bin/sh in
the sandbox rather than bind-mounting it from the host filesystem.
This makes /bin/sh work out of the box with nix-static, i.e. you no
longer get
/nix/store/qa36xhc5gpf42l3z1a8m1lysi40l9p7s-bootstrap-stage4-stdenv-linux/setup: ./configure: /bin/sh: bad interpreter: No such file or directory
This allows changes to nix-cache-info to be picked up by existing
clients. Previously, the only way for this to happen would be for
clients to delete binary-cache-v6.sqlite, which is quite awkward for
users.
On the other hand, updates to nix-cache-info should be pretty rare,
hence the choice of a fairly long TTL. Configurability is probably not
useful enough to warrant implementing it.
Allow `nix build flake1 flake2 --update-input <Tab>` to complete the
inputs of both flakes.
Also do tilde expansion so that `nix build ~/flake --update-input <Tab>`
works.
Useful because a default `sudo` on darwin doesn't clear `$HOME`, so things like `sudo nix-channel --list`
will surprisingly return the USER'S channels, rather than `root`'s.
Other counterintuitive outcomes can be seen in this PR description:
https://github.com/NixOS/nix/pull/6622
Basically an attempt to resume fixing #5543 for a breakage introduced
earlier[1]. Basically, when evaluating an older `nixpkgs` with
`nix-shell` the following error occurs:
λ ma27 [~] → nix-shell -I nixpkgs=channel:nixos-18.03 -p nix
error: anonymous function at /nix/store/zakqwc529rb6xcj8pwixjsxscvlx9fbi-source/pkgs/top-level/default.nix:20:1 called with unexpected argument 'inNixShell'
at /nix/store/zakqwc529rb6xcj8pwixjsxscvlx9fbi-source/pkgs/top-level/impure.nix:82:1:
81|
82| import ./. (builtins.removeAttrs args [ "system" "platform" ] // {
| ^
83| inherit config overlays crossSystem;
This is a problem because one of the main selling points of Nix is that
you can evaluate any old Nix expression and still get the same result
(which also means that it *still evaluates*). In fact we're deprecating,
but not removing a lot of stuff for that reason such as unquoted URLs[2]
or `builtins.toPath`. However this property was essentially thrown away
here.
The change is rather simple: check if `inNixShell` is specified in the
formals of an auto-called function. This means that
{ inNixShell ? false }:
builtins.trace inNixShell
(with import <nixpkgs> { }; makeShell { name = "foo"; })
will show `trace: true` while
args@{ ... }:
builtins.trace args.inNixShell
(with import <nixpkgs> { }; makeShell { name = "foo"; })
will throw the following error:
error: attribute 'inNixShell' missing
This is explicitly needed because the function in
`pkgs/top-level/impure.nix` of e.g. NixOS 18.03 has an ellipsis[3], but
passes the attribute-set on to another lambda with formals that doesn't
have an ellipsis anymore (hence the error from above). This was perhaps
a mistake, but we can't fix it anymore. This also means that there's
AFAICS no proper way to check if the attr-set that's passed to the Nix
code via `EvalState::autoCallFunction` is eventually passed to a lambda
with formals where `inNixShell` is missing.
However, this fix comes with a certain price. Essentially every
`shell.nix` that assumes `inNixShell` to be passed to the formals even
without explicitly specifying it would break with this[4]. However I think
that this is ugly, but preferable:
* Nix 2.3 was declared stable by NixOS up until recently (well, it still
is as long as 21.11 is alive), so most people might not have even
noticed that feature.
* We're talking about a way shorter time-span with this change being
in the wild, so the fallout should be smaller IMHO.
[1] 9d612c393a
[2] https://github.com/NixOS/rfcs/pull/45#issuecomment-488232537
[3] https://github.com/NixOS/nixpkgs/blob/release-18.03/pkgs/top-level/impure.nix#L75
[4] See e.g. the second expression in this commit-message or the changes
for `tests/ca/nix-shell.sh`.
Overrides for inputs with flake=false were non-sticky, since they
changed the `original` in `flake.lock`. This fixes it, by using the same
locked original for both flake and non-flake inputs.
nixos/nix#6290 introduced a regex pattern to account for tags when
resolving sourcehut refs. nixos/nix#4638 reafactored the code,
accidentally treating the pattern as a regular string, causing all
non-HEAD ref resolving to break.
This fixes the regression and adds more test cases to avoid future
breakage.
The manpage for `getgrouplist` says:
> If the number of groups of which user is a member is less than or
> equal to *ngroups, then the value *ngroups is returned.
>
> If the user is a member of more than *ngroups groups, then
> getgrouplist() returns -1. In this case, the value returned in
> *ngroups can be used to resize the buffer passed to a further
> call getgrouplist().
In our original code, however, we allocated a list of size `10` and, if
`getgrouplist` returned `-1` threw an exception. In practice, this
caused the code to fail for any user belonging to more than 10 groups.
While unusual for single-user systems, large companies commonly have a
huge number of POSIX groups users belong to, causing this issue to crop
up and make multi-user Nix unusable in such settings.
The fix is relatively simple, when `getgrouplist` fails, it stores the
real number of GIDs in `ngroups`, so we must resize our list and retry.
Only then, if it errors once more, we can raise an exception.
This should be backported to, at least, 2.9.x.
Bring back the possibility to copy CA paths with no reference (like the
outputs of FO derivations or stuff imported at eval time) between stores
that have a different prefix.
If a package's attribute path, description or name contains matches for any of the
regexes specified via `-e` or `--exclude` that package is excluded from
the final output.
Currently nix-build prints the "printMissing" information by default,
nix build doesn’t.
People generally don‘t notice this because the standard log-format of
nix build would not display the printMissing
output long enough to perceive the information.
This addresses https://github.com/NixOS/nix/issues/6561
