In many cases we are dealing with a collection of realisations, they are
all outputs of the same derivation. In that case, we don't need
"derivation hashes modulos" to be part of our map key, because the
output names alone will be unique. Those hashes are still part of the
realisation proper, so we aren't loosing any information, we're just
"normalizing our schema" by narrowing the "primary key".
Besides making our data model a bit "tighter" this allows us to avoid a
double `for` loop in `DerivationGoal::waiteeDone`. The inner `for` loop
was previously just to select the output we cared about without knowing
its hash. Now we can just select the output by name directly.
Note that neither protocol is changed as part of this: we are still
transferring `DrvOutputs` over the wire for `BuildResult`s. I would only
consider revising this once #6223 is merged, and we can mention protocol
versions inside factored-out serialization logic. Until then it is
better not change anything because it would come a the cost of code
reuse.
If my memory is correct, @edolstra objected to modifying `wantedOutputs`
upon falling back to doing a build (as we did before), because we should
only modify it in response to new requests --- *actual* wants --- and
not because we are "incidentally" building all the outptus beyond what
may have been requested.
That's a fair point, and the alternative is to replace the boolean soup
with proper enums: Instead of modifying `wantedOuputs` som more, we'll
modify `needsRestart` to indicate we are passed the need.
In https://github.com/NixOS/nix/pull/6311#discussion_r834863823, I
realized since derivation goals' wanted outputs can "grow" due to
overlapping dependencies (See `DerivationGoal::addWantedOutputs`, called
by `Worker::makeDerivationGoalCommon`), the previous bug fix had an
unfortunate side effect of causing more pointless rebuilds.
In paticular, we have this situation:
1. Goal made from `DerivedPath::Built { foo, {a} }`.
2. Goal gives on on substituting, starts building.
3. Goal made from `DerivedPath::Built { foo, {b} }`, in fact is just
modified original goal.
4. Though the goal had gotten as far as building, so all outputs were
going to be produced, `addWantedOutputs` no longer knows that and so
the goal is flagged to be restarted.
This might sound far-fetched with input-addressed drvs, where we usually
basically have all our goals "planned out" before we start doing
anything, but with CA derivation goals and especially RFC 92, where *drv
resolution* means goals are created after some building is completed, it
is more likely to happen.
So the first thing to do was restore the clearing of `wantedOutputs` we
used to do, and then filter the outputs in `buildPathsWithResults` to
only get the ones we care about.
But fix also has its own side effect in that the `DerivedPath` in the
`BuildResult` in `DerivationGoal` cannot be trusted; it is merely the
*first* `DerivedPath` for which this goal was originally created.
To remedy this, I made `BuildResult` be like it was before, and instead
made `KeyedBuildResult` be a subclass wit the path. Only
`buildPathsWithResults` returns `KeyedBuildResult`s, everything else
just becomes like it was before, where the "key" is unambiguous from
context.
I think separating the "primary key" field(s) from the other fields is
good practical in general anyways. (I would like to do the same thing
for `ValidPathInfo`.) Among other things, it allows constructions like
`std::map<Key, ThingWithKey>` where doesn't contain duplicate keys and
just precludes the possibility of those duplicate keys being out of
sync.
We might leverage the above someday to overload `buildPathsWithResults`
to take a *set* of return a *map* per the above.
-----
Unfortunately, we need to avoid C++20 strictness on designated
initializers.
(BTW
https://www.open-std.org/jtc1/sc22/wg21/docs/papers/2021/p2287r1.html
this offers some new syntax for this use-case. Hopefully this will be
adopted and we can eventually use it.)
No having that yet, maybe it would be better to not make
`KeyedBuildResult` a subclass to just avoid this.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
More progress on issue #5729
The method trivially generalizes to be store-implementation-agnostic, in
fact.
However, we force it to continue to be unimplemented with `RemoteStore`
and `LegacySSHStore` because the implementation we'd get via the
generalization is probably not the one users expect. This keeps our
hands untied to do it right going forward.
For more about the tension between the scheduler logic being
store-type-agnostic and remote stores doing their own scheduling, see
issues #5025 and #5056.
* Finish converting existing comments for internal API docs
99% of this was just reformatting existing comments. Only two exceptions:
- Expanded upon `BuildResult::status` compat note
- Split up file-level `symbol-table.hh` doc comments to get
per-definition docs
Also fixed a few whitespace goofs, turning leading tabs to spaces and
removing trailing spaces.
Picking up from #8133
* Fix two things from comments
* Use triple-backtick not indent for `dumpPath`
* Convert GNU-style `\`..'` quotes to markdown style in API docs
This will render correctly.
This function returns true or false depending on whether the Nix client
is trusted or not. Mostly relevant when speaking to a remote store with
a daemon.
We include this information in `nix ping store` and `nix doctor`
Co-Authored-By: John Ericson <John.Ericson@Obsidian.Systems>
This fixes the issue that `nix-build`, without experimental feature
'nix-command' enabled, recommends the experimental CLI `nix log` to view
build logs. Now it'll recommend the stable `nix-store -l` CLI instead.
Fixes https://github.com/NixOS/nix/issues/8118
Otherwise, when running as root and user namespaces are enabled,
opening the slave fails with EPERM.
Fixes "opening pseudoterminal slave: Permission denied" followed by a
hang (https://hydra.nixos.org/build/213104244), and "error: getting
sandbox mount namespace: No such file or directory" (#8072), which
happens when the child fails very quickly and consequently reading
/proc/<child>/ns fails.
Hopefully this fixes "unexpected EOF" failures on macOS
(#3137, #3605, #7242, #7702).
The problem appears to be that under some circumstances, macOS
discards the output written to the slave side of the
pseudoterminal. Hence the parent never sees the "sandbox initialized"
message from the child, even though it succeeded. The conditions are:
* The child finishes very quickly. That's why this bug is likely to
trigger in nix-env tests, since that uses a builtin builder. Adding
a short sleep before the child exits makes the problem go away.
* The parent has closed its duplicate of the slave file
descriptor. This shouldn't matter, since the child has a duplicate
as well, but it does. E.g. moving the close to the bottom of
startBuilder() makes the problem go away. However, that's not a
solution because it would make Nix hang if the child dies before
sending the "sandbox initialized" message.
* The system is under high load. E.g. "make installcheck -j16" makes
the issue pretty reproducible, while it's very rare under "make
installcheck -j1".
As a fix/workaround, we now open the pseudoterminal slave in the
child, rather than the parent. This removes the second condition
(i.e. the parent no longer needs to close the slave fd) and I haven't
been able to reproduce the "unexpected EOF" with this.
The curl download can outlive DrvOutputSubstitutionGoal (if some other
error occurs), so at shutdown setting the promise to an exception will
fail because 'this' is no longer valid in the callback. This can
manifest itself as a segfault, "corrupted double-linked list" or hang.
We make sure the env var paths are actually set (ie. not "") before
sending them to the canonicalization function. If we forget to do so,
the user will end up facing a puzzled failed assertion internal error.
We issue a non-failing warning as a stop-gap measure. We could want to
revisit this to issue a detailed failing error message in the future.
In unprivileged podman containers, /proc is not fully visible (there
are other filesystems mounted on subdirectories of /proc). Therefore
we can't mount a new /proc in the sandbox that matches the PID
namespace of the sandbox. So this commit automatically disables
sandboxing if /proc is not fully visible.
This didn't work because sandboxing doesn't work in Docker. However,
the sandboxing check is done lazily - after clone(CLONE_NEWNS) fails,
we retry with sandboxing disabled. But at that point, we've already
done UID allocation under the assumption that user namespaces are
enabled.
So let's get rid of the "goto fallback" logic and just detect early
whether user / mount namespaces are enabled.
This commit also gets rid of a compatibility hack for some ancient
Linux kernels (<2.13).
With the switch to C++20, the rules became more strict, and we can no
longer initialize base classes. Make them comments instead.
(BTW
https://www.open-std.org/jtc1/sc22/wg21/docs/papers/2021/p2287r1.html
this offers some new syntax for this use-case. Hopefully this will be
adopted and we can eventually use it.)
Rather than using `/nix/var/nix/{profiles,gcroots}/per-user/`, put the user
profiles and gcroots under `$XDG_DATA_DIR/nix/{profiles,gcroots}`.
This means that the daemon no longer needs to manage these paths itself
(they are fully handled client-side). In particular, it doesn’t have to
`chown` them anymore (removing one need for root).
This does change the layout of the gc-roots created by nix-env, and is
likely to break some stuff, so I’m not sure how to properly handle that.
This should be a non-empty set, and so we don't want people doing this
by accident. We remove the zero-0 constructor with a little inheritance
trickery.
`DerivedPath::Built` and `DerivationGoal` were previously using a
regular set with the convention that the empty set means all outputs.
But it is easy to forget about this rule when processing those sets.
Using `OutputSpec` forces us to get it right.
This basically reverts 6e5165b773.
It fixes errors like
sandbox-exec: <internal init prelude>:292:47: unable to open sandbox-minimal.sb: not found
when trying to run a development Nix installed in a user's home
directory.
Also, we're trying to minimize the number of installed files
to make it possible to deploy Nix as a single statically-linked
binary.
Adds a new boolean structured attribute
`outputChecks.<output>.unsafeDiscardReferences` which disables scanning
an output for runtime references.
__structuredAttrs = true;
outputChecks.out.unsafeDiscardReferences = true;
This is useful when creating filesystem images containing their own embedded Nix
store: they are self-contained blobs of data with no runtime dependencies.
Setting this attribute requires the experimental feature
`discard-references` to be enabled.
This makes 'nix develop' set the Linux personality in the same way
that the actual build does, allowing a command like 'nix develop
nix#devShells.i686-linux.default' on x86_64-linux to work correctly.
These only functioned if a very narrow combination of conditions held:
- The result path does not yet exist (--check did not result in
repeated builds), AND
- The result path is not available from any configured substituters, AND
- No remote builders that can build the path are available.
If any of these do not hold, a derivation would be built 0 or 1 times
regardless of the repeat option. Thus, remove it to avoid confusion.
We shouldn't skip this if the supplementary group list is empty,
because then the sandbox won't drop the supplementary groups of the
parent (like "root").
The new experimental feature 'cgroups' enables the use of cgroups for
all builds. This allows better containment and enables setting
resource limits and getting some build stats.
It occurred when a output of the dependency was already available,
so it didn't need rebuilding and didn't get added to the
inputDrvOutputs.
This process-related info wasn't suitable for the purpose of finding
the actual input paths for the builder. It is better to do this in
absolute terms by querying the store.
Cgroups are now only used for derivations that require the uid-range
range feature. This allows auto UID allocation even on systems that
don't have cgroups (like macOS).
Also, make things work on modern systems that use cgroups v2 (where
there is a single hierarchy and no "systemd" controller).
Call it as `['nix', '__build-remote', ... ]` rather than the previous
`["__build-remote", "nix __build-remote", ... ]` which seemed to have
been most likely unintended
After we've send "\2\n" to the parent, we can't send a serialized
exception anymore. It will show up garbled like
$ nix-build --store /tmp/nix --expr 'derivation { name = "foo"; system = "x86_64-linux"; builder = "/foo/bar"; }'
this derivation will be built:
/nix/store/xmdip0z5x1zqpp6gnxld3vqng7zbpapp-foo.drv
building '/nix/store/xmdip0z5x1zqpp6gnxld3vqng7zbpapp-foo.drv'...
ErrorErrorEexecuting '/foo/bar': No such file or directory
error: builder for '/nix/store/xmdip0z5x1zqpp6gnxld3vqng7zbpapp-foo.drv' failed with exit code 1
readDerivation is pretty slow, and while it may not be significant for
some use cases, on things like ghc-nix where we have thousands of
derivations is really slows things down.
So, this just doesn’t do the impure derivation check if the impure
derivation experimental feature is disabled. Perhaps we could cache
the result of isPure() and keep the check, but this is a quick fix to
for the slowdown introduced with impure derivations features in 2.8.0.
RewritingSink can handle being fed input where a reference crosses a
chunk boundary. we don't need to load the whole source into memory, and
in fact *not* loading the whole source lets nix build FODs that do not
fit into memory (eg fetchurl'ing data files larger than system memory).
Once a derivation goal has been completed, we check whether or not
this goal was meant to be repeated to check its output.
An early return branch was preventing the worker to reach that repeat
code branch, hence breaking the --check command (#2619).
It seems like this early return branch is an artifact of a passed
refactoring. As far as I can tell, buildDone's main branch also
cleanup the tmp directory before returning.
The workaround for "Some distros patch Linux" mentioned in
local-derivation-goal.cc will not help in the `--option
sandbox-fallback false` case. To provide the user more helpful
guidance on how to get the sandbox working, let's check to see if the
`/proc` node created by the aforementioned patch is present and
configured in a way that will cause us problems. If so, give the user
a suggestion for how to troubleshoot the problem.
local-derivation-goal.cc contains a comment stating that "Some distros
patch Linux to not allow unprivileged user namespaces." Let's give a
pointer to a common version of this patch for those who want more
details about this failure mode.
This commit causes nix to `warn()` if sandbox setup has failed and
`/proc/self/ns/user` does not exist. This is usually a sign that the
kernel was compiled without `CONFIG_USER_NS=y`, which is required for
sandboxing.
This commit uses `warn()` to notify the user if sandbox setup fails
with errno==EPERM and /proc/sys/user/max_user_namespaces is missing or
zero, since that is at least part of the reason why sandbox setup
failed.
Note that `echo -n 0 > /proc/sys/user/max_user_namespaces` or
equivalent at boot time has been the recommended mitigation for
several Linux LPE vulnerabilities over the past few years. Many users
have applied this mitigation and then forgotten that they have done
so.
The failure modes for nix's sandboxing setup are pretty complicated.
When nix is unable to set up the sandbox, let's provide more detail
about what went wrong. Specifically:
* Make sure the error message includes the word "sandbox" so the user
knows that the failure was related to sandboxing.
* If `--option sandbox-fallback false` was provided, and removing it
would have allowed further attempts to make progress, let the user
know.
With this, Nix will write a copy of the sandbox shell to /bin/sh in
the sandbox rather than bind-mounting it from the host filesystem.
This makes /bin/sh work out of the box with nix-static, i.e. you no
longer get
/nix/store/qa36xhc5gpf42l3z1a8m1lysi40l9p7s-bootstrap-stage4-stdenv-linux/setup: ./configure: /bin/sh: bad interpreter: No such file or directory
A mips64el Linux MIPS kernel can execute userspace code using any of
three ABIs:
mips64el-linux-*abin64
mips64el-linux-*abin32
mipsel-linux-*
The first of these is the native 64-bit ABI, and the only ABI with
64-bit pointers; this is sometimes called "n64". The last of these is
the old legacy 32-bit ABI, whose binaries can execute natively on
32-bit MIPS hardware; this is sometimes called "o32".
The second ABI, "n32" is essentially the 64-bit ABI with 32-bit
pointers and address space. Hardware 64-bit integer/floating
arithmetic is still allowed, as well as the much larger mips64
register set and more-efficient calling convention.
Let's enable seccomp filters for all of these. Likewise for big
endian (mips64-linux-*).
Previously it only logged the builder's path, this changes it to log the
arguments at the same log level, and the environment variables at the
vomit level.
This helped me debug https://github.com/svanderburg/node2nix/issues/75
This was caused by SubstitutionGoal not setting the errorMsg field in
its BuildResult. We now get a more descriptive message than in 2.7.0, e.g.
error: path '/nix/store/13mh...' is required, but there is no substituter that can build it
instead of the misleading (since there was no build)
error: build of '/nix/store/13mh...' failed
Fixes#6295.
Impure derivations are derivations that can produce a different result
every time they're built. Example:
stdenv.mkDerivation {
name = "impure";
__impure = true; # marks this derivation as impure
outputHashAlgo = "sha256";
outputHashMode = "recursive";
buildCommand = "date > $out";
};
Some important characteristics:
* This requires the 'impure-derivations' experimental feature.
* Impure derivations are not "cached". Thus, running "nix-build" on
the example above multiple times will cause a rebuild every time.
* They are implemented similar to CA derivations, i.e. the output is
moved to a content-addressed path in the store. The difference is
that we don't register a realisation in the Nix database.
* Pure derivations are not allowed to depend on impure derivations. In
the future fixed-output derivations will be allowed to depend on
impure derivations, thus forming an "impurity barrier" in the
dependency graph.
* When sandboxing is enabled, impure derivations can access the
network in the same way as fixed-output derivations. In relaxed
sandboxing mode, they can access the local filesystem.
This avoids an infinite loop in the final test in
tests/binary-cache.sh. I think this was only not triggered previously
by accident (because we were clearing wantedOutputs in between).
1. `DerivationOutput` now as the `std::variant` as a base class. And the
variants are given hierarchical names under `DerivationOutput`.
In 8e0d0689be @matthewbauer and I
didn't know a better idiom, and so we made it a field. But this sort
of "newtype" is anoying for literals downstream.
Since then we leaned the base class, inherit the constructors trick,
e.g. used in `DerivedPath`. Switching to use that makes this more
ergonomic, and consistent.
2. `store-api.hh` and `derivations.hh` are now independent.
In bcde5456cc I swapped the dependency,
but I now know it is better to just keep on using incomplete types as
much as possible for faster compilation and good separation of
concerns.
Continue progress on #5729.
Just as I hoped, this uncovered an issue: the daemon protocol is missing
a way to query build logs. This doesn't effect `unix://`, but does
effect `ssh://`. A FIXME is left for this, so we come back to it later.
