This is primarily useful for version string generation, where we need
a monotonically increasing number. The revcount is the preferred thing
to use, but isn't available for GitHub flakes (since it requires
fetching the entire history). The last commit timestamp OTOH can be
extracted from GitHub tarballs.
This ensures that flakes don't get garbage-collected, which is
important to get nix-channel-like behaviour.
For example, running
$ nix build hydra:
will create a GC root
~/.cache/nix/flake-closures/hydra -> /nix/store/xarfiqcwa4w8r4qpz1a769xxs8c3phgn-flake-closure
where the contents/references of the linked file in the store are the
flake source trees used by the 'hydra' flake:
/nix/store/n6d5f5lkpfjbmkyby0nlg8y1wbkmbc7i-source
/nix/store/vbkg4zy1qd29fnhflsv9k2j9jnbqd5m2-source
/nix/store/z46xni7d47s5wk694359mq9ay353ar94-source
Note that this in itself is not enough to allow offline use; the
fetcher for the flakeref (e.g. fetchGit or downloadCached) must not
fail if it cannot fetch the latest version of the file, so long as it
knows a cached version.
Issue #2868.
This causes 'nix' to print build log output to stderr rather than
showing the last log line in the progress bar. Log lines are prefixed
by the name of the derivation (minus the version string), e.g.
binutils> make[1]: Leaving directory '/build/binutils-2.31.1'
binutils-wrapper> unpacking sources
binutils-wrapper> patching sources
...
binutils-wrapper> Using dynamic linker: '/nix/store/kr51dlsj9v5cr4n8700jliyz8v5b2q7q-bootstrap-stage0-glibc/lib/ld-linux-x86-64.so.2'
bootstrap-stage2-gcc-wrapper> unpacking sources
...
linux-headers> unpacking sources
linux-headers> unpacking source archive /nix/store/8javli69jhj3bkql2c35gsj5vl91p382-linux-4.19.16.tar.xz
Sometimes, "expected" can be "0", but in fact means "unknown".
This is for example the case when downloading a file while the http
server doesn't send the `Content-Length` header, like when running `nix
build` pointing to a nixpkgs checkout streamed from GitHub:
⇒ nix build -f https://github.com/NixOS/nixpkgs/archive/master.tar.gz hello
[1.8/0.0 MiB DL] downloading 'https://github.com/NixOS/nixpkgs/archive/master.tar.gz'
In that case, don't show that weird progress bar, but only the (slowly
increasing) downloaded size ("done").
⇒ nix build -f https://github.com/NixOS/nixpkgs/archive/master.tar.gz hello
[1.8 MiB DL] downloading 'https://github.com/NixOS/nixpkgs/archive/master.tar.gz'
This commit also updates fmt calls with three numbers (when something is
currently 'running' too) - I'm not sure if this can be provoked, but
showing "0" as expected doesn't make any sense, as we're obviously doing
more than nothing.
Thus
$ nix dev-shell
will now build the 'provides.devShell' attribute from the flake in the
current directory. If it doesn't exist, it falls back to
'provides.defaultPackage'.
'nix dev-shell' is intended to replace nix-shell. It supports flakes,
e.g.
$ nix dev-shell nixpkgs:hello
starts a bash shell providing an environment for building 'hello'.
Like Lorri (and unlike nix-shell), it computes the build environment
by building a modified top-level derivation that writes the
environment after running $stdenv/setup to $out and exits. This
provides some caching, so it's faster than nix-shell in some cases
(especially for packages with lots of dependencies, where the setup
script takes a long time).
There also is a command 'nix print-dev-env' that prints out shell code
for setting up the build environment in an existing shell, e.g.
$ . <(nix print-dev-env nixpkgs:hello)
https://github.com/tweag/nix/issues/21
Example:
$ nix flake info dwarffs
ID: dwarffs
URI: github:edolstra/dwarffs/a83d182fe3fe528ed6366a5cec3458bcb1a5f6e1
Description: A filesystem that fetches DWARF debug info from the Internet on demand
Revision: a83d182fe3fe528ed6366a5cec3458bcb1a5f6e1
Path: /nix/store/grgd14kxxk8q4n503j87mpz48gcqpqw7-source
This ensures that the lock file is updated *before* evaluating it, and
that it gets updated for any nix command, not just 'nix build'.
Also, while computing the lock file, allow arbitrary registry lookups,
not just at top-level.
Also, improve some error messages slightly.
Also allow "." as an installable to refer to the flake in the current
directory. E.g.
$ nix build .
will build 'provides.defaultPackage' in the flake in the current
directory.
The general syntax for an installable is now
<flakeref>:<attrpath>. The attrpath is relative to the flake's
'provides.packages' or 'provides' if the former doesn't yield a
result. E.g.
$ nix build nixpkgs:hello
is equivalent to
$ nix build nixpkgs:packages.hello
Also, '<flakeref>:' can be omitted, in which case it defaults to
'nixpkgs', e.g.
$ nix build hello
This allows using an arbitrary "provides" attribute from the specified
flake. For example:
nix build --flake nixpkgs packages.hello
(Maybe provides.packages should be used for consistency...)
We want to encourage a brave new world of hermetic evaluation for
source-level reproducibility, so flakes should not poke around in the
filesystem outside of their explicit dependencies.
Note that the default installation source remains impure in that it
can refer to mutable flakes, so "nix build nixpkgs.hello" still works
(and fetches the latest nixpkgs, unless it has been pinned by the
user).
A problem with pure evaluation is that builtins.currentSystem is
unavailable. For the moment, I've hard-coded "x86_64-linux" in the
nixpkgs flake. Eventually, "system" should be a flake function
argument.
This reverts commit a0ef21262f. This
doesn't work in 'nix run' and nix-shell because setns() fails in
multithreaded programs, and Boehm GC mark threads are uncancellable.
Fixes#2646.
SRI hashes (https://www.w3.org/TR/SRI/) combine the hash algorithm and
a base-64 hash. This allows more concise and standard hash
specifications. For example, instead of
import <nix/fetchurl.nl> {
url = https://nixos.org/releases/nix/nix-2.1.3/nix-2.1.3.tar.xz;
sha256 = "5d22dad058d5c800d65a115f919da22938c50dd6ba98c5e3a183172d149840a4";
};
you can write
import <nix/fetchurl.nl> {
url = https://nixos.org/releases/nix/nix-2.1.3/nix-2.1.3.tar.xz;
hash = "sha256-XSLa0FjVyADWWhFfkZ2iKTjFDda6mMXjoYMXLRSYQKQ=";
};
In fixed-output derivations, the outputHashAlgo is no longer mandatory
if outputHash specifies the hash (either as an SRI or in the old
"<type>:<hash>" format).
'nix hash-{file,path}' now print hashes in SRI format by default. I
also reverted them to use SHA-256 by default because that's what we're
using most of the time in Nixpkgs.
Suggested by @zimbatm.
The goal is to support libeditline AND libreadline and let the user
decide at compile time which one to use.
Add a compile time option to use libreadline instead of
libeditline. If compiled against libreadline completion functionality
is lost because of a incompatibility between libeditlines and
libreadlines completion function. Completion with libreadline is
possible and can be added later.
To use libreadline instead of libeditline the environment
variables 'EDITLINE_LIBS' and 'EDITLINE_CFLAGS' have to been set
during the ./configure step.
Example:
EDITLINE_LIBS="/usr/lib/x86_64-linux-gnu/libhistory.so /usr/lib/x86_64-linux-gnu/libreadline.so"
EDITLINE_CFLAGS="-DREADLINE"
The reason for this change is that for example on Debian already three
different editline libraries exist but none of those is compatible the
flavor used by nix. My hope is that with this change it would be
easier to port nix to systems that have already libreadline available.
