Support using nix flakes in paths with spaces or abitrary unicode characters.
This introduces the convention that the path part of the URL should be
percent-encoded when dealing with `path:` urls and not when using
filepaths (following the convention of firefox).
Co-authored-by: Rendal <rasmus@rend.al>
We use the same nested map representation we used for goals, again in
order to save space. We might someday want to combine with `inputDrvs`,
by doing `V = bool` instead of `V = std::set<OutputName>`, but we are
not doing that yet for sake of a smaller diff.
The ATerm format for Derivations also needs to be extended, in addition
to the in-memory format. To accomodate this, we added a new basic
versioning scheme, so old versions of Nix will get nice errors. (And
going forward, if the ATerm format changes again the errors will be even
better.)
`parsedStrings`, an internal function used as part of parsing
derivations in A-Term format, used to consume the final `]` but expect
the initial `[` to already be consumed. This made for what looked like
unbalanced brackets at callsites, which was confusing. Now it consumes
both which is hopefully less confusing.
As part of testing, we also created a unit test for the A-Term format for
regular non-experimental derivations too.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Apply suggestions from code review
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
This function is now trivial enough that it doesn't need to exist.
`EvalState` can still be initialized with a custom search path, but we
don't have a need to mutate the search path after it has been
constructed, and I don't see why we would need to in the future.
Fixes#8229
Types converted:
- `NixStringContextElem`
- `OutputsSpec`
- `ExtendedOutputsSpec`
- `DerivationOutput`
- `DerivationType`
Existing ones mostly conforming the pattern cleaned up:
- `ContentAddressMethod`
- `ContentAddressWithReferences`
The `DerivationGoal::derivationType` field had a bogus initialization,
now caught, so I made it `std::optional`. I think #8829 can make it
non-optional again because it will ensure we always have the derivation
when we construct a `DerivationGoal`.
See that issue (#7479) for details on the general goal.
`git grep 'Raw::Raw'` indicates the two types I didn't yet convert
`DerivedPath` and `BuiltPath` (and their `Single` variants) . This is
because @roberth and I (can't find issue right now...) plan on reworking
them somewhat, so I didn't want to churn them more just yet.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Without the change build with `-D_GLIBCXX_ASSERTIONS` exposes testsuite
assertion:
$ gdb src/libexpr/tests/libnixexpr-tests
Reading symbols from src/libexpr/tests/libnixexpr-tests...
(gdb) break __glibcxx_assert_fail
(gdb) run
(gdb) bt
in std::__glibcxx_assert_fail(char const*, int, char const*, char const*)@plt () from /mnt/archive/big/git/nix/src/libexpr/libnixexpr.so
in std::basic_string_view<char, std::char_traits<char> >::operator[] (this=0x7fffffff56c0, __pos=4)
at /nix/store/r74fw2j8rx5idb0w8s1s6ynwwgs0qmh9-gcc-14.0.0/include/c++/14.0.0/string_view:258
in nix::SearchPath::Prefix::suffixIfPotentialMatch (this=0x7fffffff5780, path=...) at src/libexpr/search-path.cc:15
in nix::SearchPathElem_suffixIfPotentialMatch_partialPrefix_Test::TestBody (this=0x555555a17540) at src/libexpr/tests/search-path.cc:62
As string sizes are usigned types `(a - b) > 0` effectively means
`a != b`. While the intention should be `a > b`.
The change fixes test suite pass.
In the Nix language, given a drv path, we should be able to construct
another string referencing to one of its output. We can do this today
with `(import drvPath).output`, but this only works for derivations we
already have.
With dynamic derivations, however, that doesn't work well because the
`drvPath` isn't yet built: importing it like would need to trigger IFD,
when the whole point of this feature is to do "dynamic build graph"
without IFD!
Instead, what we want to do is create a placeholder value with the right
string context to refer to the output of the as-yet unbuilt derivation.
A new primop in the language, analogous to `builtins.placeholder` can be
used to create one. This will achieve all the right properties. The
placeholder machinery also will match out the `outPath` attribute for CA
derivations works.
In 60b7121d2c we added that type of
placeholder, and the derived path and string holder changes necessary to
support it. Then in the previous commit we cleaned up the code
(inspiration finally hit me!) to deduplicate the code and expose exactly
what we need. Now, we can wire up the primop trivally!
Part of RFC 92: dynamic derivations (tracking issue #6316)
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
`EvalState::mkSingleDerivedPathString` previously contained its own
inverse (printing, rather than parsing) in order to validate what was
parsed. Now that is pulled out into its own separate function:
`EvalState::coerceToSingleDerivedPath`.
In additional that pulled out logic is deduplicated with
`EvalState::mkOutputString` via `EvalState::mkOutputStringRaw`, which is
itself deduplicated (and generalized) with
`DownstreamPlaceholder::mkOutputStringRaw`.
All these changes make the unit tests simpler.
(We would ideally write more unit tests for `mkSingleDerivedPathString`
`coerceToSingleDerivedPath` directly, but we cannot yet do that because
the IO in reading the store path won't work when the dummy store cannot
hold anything. Someday we'll have a proper in-memory store which will
work for this.)
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
We want to be able to write down `foo.drv^bar.drv^baz`:
`foo.drv^bar.drv` is the dynamic derivation (since it is itself a
derivation output, `bar.drv` from `foo.drv`).
To that end, we create `Single{Derivation,BuiltPath}` types, that are
very similar except instead of having multiple outputs (in a set or
map), they have a single one. This is for everything to the left of the
rightmost `^`.
`NixStringContextElem` has an analogous change, and now can reuse
`SingleDerivedPath` at the top level. In fact, if we ever get rid of
`DrvDeep`, `NixStringContextElem` could be replaced with
`SingleDerivedPath` entirely!
Important note: some JSON formats have changed.
We already can *produce* dynamic derivations, but we can't refer to them
directly. Today, we can merely express building or example at the top
imperatively over time by building `foo.drv^bar.drv`, and then with a
second nix invocation doing `<result-from-first>^baz`, but this is not
declarative. The ethos of Nix of being able to write down the full plan
everything you want to do, and then execute than plan with a single
command, and for that we need the new inductive form of these types.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Avoid duplicated code, and also avoid "on the fly" path construction
(which makes it harder to keep track of which paths we use).
The factored out code doesn't create the Nix state dir anymore, but this
is fine because other in nix-env and nix-channel does:
- nix-channel: Line 158 in this commit
- nix-env: Line 1407 in this commit
Special-casing the file name is rather ugly, so we shouldn't do
that. So now any {file,http,https} URL is handled by
TarballInputScheme, except for non-flake inputs (i.e. inputs that have
the attribute `flake = false`).
Over the last year or so I've run into several use cases where I need to
parse and/or serialize URLs for use by `builtins.fetchTree` or
`builtins.getFlake`, largely in order to produce _lockfile-like_ files
for lang2nix frameworks or tools which use `nix` internally to drive
builds.
I've gone through the painstaking process of emulating
`nix::FlakeRef::fromAttrs` and `nix::parseFlakeRef` several times with
mixed success; but these are difficult to create and even harder to
maintain if I hope to stay aligned with changes to the real
parser/serializer.
I understand why adding new `builtins` isn't something we want to do
flagrantly. I'm recommending this addition simply because I keep
encountering use cases where I need to parse/serialize these URIs in
`nix` expressions, and I want a reliable solution.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Co-authored-by: John Ericson <git@JohnEricson.me>
the original change broke many pre-existing anchor links.
also change formatting of the constants listing slightly:
- the type should not be part of the anchor
- add highlight to the "impure only" note
- Better types
- Own header / C++ file pair
- Test factored out methods
- Pass parsed thing around more than strings
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Whereas `ContentAddressWithReferences` is a sum type complex because different
varieties support different notions of reference, and
`ContentAddressMethod` is a nested enum to support that,
`ContentAddress` can be a simple pair of a method and hash.
`ContentAddress` does not need to be a sum type on the outside because
the choice of method doesn't effect what type of hashes we can use.
Co-Authored-By: Cale Gibbard <cgibbard@gmail.com>
If we call `adjustLoc`, the global variable `prev_yylloc` is shared
between threads and racy.
Currently, nix itself does not concurrently parsing files, but this is
helpful for libexpr users. (The parser is thread-safe except this.)
