If experimental feature "flakes" is enabled, args passed to `nix repl`
will now be considered flake refs and imported using the existing
`:load-flake` machinery.
In addition, `:load-flake` now supports loading flake fragments.
Ensures the logger is stopped on exit in legacy commands. Without this,
when using `nix-build --log-format bar` and stopping nix with CTRL+C,
the bar is not cleared from the screen.
'nix profile install' will now install all outputs listed in the
package's meta.outputsToInstall attribute, or all outputs if that
attribute doesn't exist. This makes it behave consistently with
nix-env. Fixes#6385.
Furthermore, for consistency, all other 'nix' commands do this as
well. E.g. 'nix build' will build and symlink the outputs in
meta.outputsToInstall, defaulting to all outputs. Previously, it only
built/symlinked the first output. Note that this means that selecting
a specific output using attrpath selection (e.g. 'nix build
nixpkgs#libxml2.dev') no longer works. A subsequent PR will add a way
to specify the desired outputs explicitly.
after #6218 `Symbol` no longer confers a uniqueness invariant on the
string it wraps, it is now possible to create multiple symbols that
compare equal but whose string contents have different addresses. this
guarantee is now only provided by `SymbolIdx`, leaving `Symbol` only as
a string wrapper that knows about the intricacies of how symbols need to
be formatted for output.
this change renames `SymbolIdx` to `Symbol` to restore the previous
semantics of `Symbol` to that name. we also keep the wrapper type and
rename it to `SymbolStr` instead of returning plain strings from lookups
into the symbol table because symbols are formatted for output in many
places. theoretically we do not need `SymbolStr`, only a function that
formats a string for output as a symbol, but having to wrap every symbol
that appears in a message into eg `formatSymbol()` is error-prone and
inconvient.
this slightly increases the amount of memory used for any given symbol, but this
increase is more than made up for if the symbol is referenced more than once in
the EvalState that holds it. on average every symbol should be referenced at
least twice (once to introduce a binding, once to use it), so we expect no
increase in memory on average.
symbol tables are limited to 2³² entries like position tables, and similar
arguments apply to why overflow is not likely: 2³² symbols would require as many
string instances (at 24 bytes each) and map entries (at 24 bytes or more each,
assuming that the map holds on average at most one item per bucket as the docs
say). a full symbol table would require at least 192GB of memory just for
symbols, which is well out of reach. (an ofborg eval of nixpks today creates
less than a million symbols!)
Pos objects are somewhat wasteful as they duplicate the origin file name and
input type for each object. on files that produce more than one Pos when parsed
this a sizeable waste of memory (one pointer per Pos). the same goes for
ptr<Pos> on 64 bit machines: parsing enough source to require 8 bytes to locate
a position would need at least 8GB of input and 64GB of expression memory. it's
not likely that we'll hit that any time soon, so we can use a uint32_t index to
locate positions instead.
only file and line of the returned position were ever used, it wasn't actually
used a position. as such we may as well use a path+int pair for only those two
values and remove a use of Pos that would not work well with a position table.
a future commit will remove the ability to convert the symbol type used in
bindings to strings. since we only have two users we can inline the error check.
Requested by ppepino on the Matrix:
https://matrix.to/#/!KqkRjyTEzAGRiZFBYT:nixos.org/$Tb32BS3rVE2BSULAX4sPm0h6CDewX2hClOTGzTC7gwM?via=nixos.org&via=matrix.org&via=nixos.dev
This adds a new command, :bl, which works like :b but also creates
a GC root symlink to the various derivation outputs.
ckie@cookiemonster ~/git/nix -> ./outputs/out/bin/nix repl
Welcome to Nix 2.6.0. Type :? for help.
nix-repl> :l <nixpkgs>
Added 16118 variables.
nix-repl> :b runCommand "hello" {} "echo hi > $out"
This derivation produced the following outputs:
./repl-result-out -> /nix/store/kidqq2acdpi05c4a9mlbg2baikmzik44-hello
[1 built, 0.0 MiB DL]
ckie@cookiemonster ~/git/nix -> cat ./repl-result-out
hi
In particular, this means that 'nix eval` (which uses toValue()) no
longer auto-calls functions or functors (because
AttrCursor::findAlongAttrPath() doesn't).
Fixes#6152.
Also use ref<> in a few places, and don't return attrpaths from
getCursor() because cursors already have a getAttrPath() method.
Impure derivations are derivations that can produce a different result
every time they're built. Example:
stdenv.mkDerivation {
name = "impure";
__impure = true; # marks this derivation as impure
outputHashAlgo = "sha256";
outputHashMode = "recursive";
buildCommand = "date > $out";
};
Some important characteristics:
* This requires the 'impure-derivations' experimental feature.
* Impure derivations are not "cached". Thus, running "nix-build" on
the example above multiple times will cause a rebuild every time.
* They are implemented similar to CA derivations, i.e. the output is
moved to a content-addressed path in the store. The difference is
that we don't register a realisation in the Nix database.
* Pure derivations are not allowed to depend on impure derivations. In
the future fixed-output derivations will be allowed to depend on
impure derivations, thus forming an "impurity barrier" in the
dependency graph.
* When sandboxing is enabled, impure derivations can access the
network in the same way as fixed-output derivations. In relaxed
sandboxing mode, they can access the local filesystem.
Rather than having four different but very similar types of hashes, make
only one, with a tag indicating whether it corresponds to a regular of
deferred derivation.
This implies a slight logical change: The original Nix+multiple-outputs
model assumed only one hash-modulo per derivation. Adding
multiple-outputs CA derivations changed this as these have one
hash-modulo per output. This change is now treating each derivation as
having one hash modulo per output.
This obviously means that we internally loose the guaranty that
all the outputs of input-addressed derivations have the same hash
modulo. But it turns out that it doesn’t matter because there’s nothing
in the code taking advantage of that fact (and it probably shouldn’t
anyways).
The upside is that it is now much easier to work with these hashes, and
we can get rid of a lot of useless `std::visit{ overloaded`.
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems>
Before this change, processLine always uses the first character
as the start of the line. This cause whitespaces to matter at the
beginning of the line whereas it does not matter anywhere else.
This commit trims leading white spaces of the string line so that
subsequent operations can be performed on the string without explicitly
tracking starting and ending indices of the string.
1. `DerivationOutput` now as the `std::variant` as a base class. And the
variants are given hierarchical names under `DerivationOutput`.
In 8e0d0689be @matthewbauer and I
didn't know a better idiom, and so we made it a field. But this sort
of "newtype" is anoying for literals downstream.
Since then we leaned the base class, inherit the constructors trick,
e.g. used in `DerivedPath`. Switching to use that makes this more
ergonomic, and consistent.
2. `store-api.hh` and `derivations.hh` are now independent.
In bcde5456cc I swapped the dependency,
but I now know it is better to just keep on using incomplete types as
much as possible for faster compilation and good separation of
concerns.
Don’t try and assume that we know the output paths when we’ve just built
with `--dry-run`. Instead make `--dry-run` follow a different code path
that won’t assume the knowledge of the output paths at all.
Fix#6275
This changes was taken from dynamic derivation (#4628). It` somewhat
undoes the refactors I first did for floating CA derivations, as the
benefit of hindsight + requirements of dynamic derivations made me
reconsider some things.
They aren't to consequential, but I figured they might be good to land
first, before the more profound changes @thufschmitt has in the works.
Continue progress on #5729.
Just as I hoped, this uncovered an issue: the daemon protocol is missing
a way to query build logs. This doesn't effect `unix://`, but does
effect `ssh://`. A FIXME is left for this, so we come back to it later.
Starts progress on #5729.
The idea is that we should not have these default methods throwing
"unimplemented". This is a small step in that direction.
I kept `addTempRoot` because it is a no-op, rather than failure. Also,
as a practical matter, it is called all over the place, while doing
other tasks, so the downcasting would be annoying.
Maybe in the future I could move the "real" `addTempRoot` to `GcStore`,
and the existing usecases use a `tryAddTempRoot` wrapper to downcast or
do nothing, but I wasn't sure whether that was a good idea so with a
bias to less churn I didn't do it yet.
This is useful whenever we want to evaluate something to a store path
(e.g. in get-drvs.cc).
Extracted from the lazy-trees branch (where we can require that a
store path must come from a store source tree accessor).
On Nix 2.6 the output of `nix why-depends --all` seems to be somewhat
off:
$ nix why-depends /nix/store/kn47hayxab8gc01jhr98dwyywbx561aq-nixos-system-roflmayr-21.11.20220207.6c202a9.drv /nix/store/srn5jbs1q30jpybdmxqrwskyny659qgc-nix-2.6.drv --derivation --extra-experimental-features nix-command --all
/nix/store/kn47hayxab8gc01jhr98dwyywbx561aq-nixos-system-roflmayr-21.11.20220207.6c202a9.drv
└───/nix/store/g8bpgfjhh5vxrdq0w6r6s64f9kkm9z6c-etc.drv
│ └───/nix/store/hm0jmhp8shbf3cl846a685nv4f5cp3fy-nspawn-inst.drv
| [...]
└───/nix/store/2d6q3ygiim9ijl5d4h0qqx6vnjgxywyr-system-units.drv
└───/nix/store/dil014y1b8qyjhhhf5fpaah5fzdf0bzs-unit-systemd-nspawn-hydra.service.drv
└───/nix/store/a9r72wwx8qrxyp7hjydyg0gsrwnn26zb-activate.drv
└───/nix/store/99hlc7i4gl77wq087lbhag4hkf3kvssj-nixos-system-hydra-21.11pre-git.drv
Please note that `[...]-system-units.drv` is supposed to be a direct
child of `[...]-etc.drv`.
The reason for that is that each new level printed by `printNode` is
four spaces off in comparison to `nix why-depends --precise` because the
recursive `printNode()` only prints the path and not the `tree*`-chars in
the case of `--precise` and in this format the path is four spaces further
indented, i.e. on a newline, but on the same level as the path's children, i.e.
/nix/store/kn47hayxab8gc01jhr98dwyywbx561aq-nixos-system-roflmayr-21.11.20220207.6c202a9.drv
└───/: …1-p8.drv",["out"]),("/nix/store/g8bpgfjhh5vxrdq0w6r6s64f9kkm9z6c-etc.drv",["out"]),("/nix/store/…
→ /nix/store/g8bpgfjhh5vxrdq0w6r6s64f9kkm9z6c-etc.drv
As you can see `[...]-etc.drv` is a direct child of the root, but four
spaces indented. This logic was directly applied to the code-path with
`precise=false` which resulted in `tree*` being printed four spaces too
deep.
In case of no `--precise`, `hits[hash]` is empty and the path itself
should be printed rather than hits using the same logic as for `hits[hash]`.
With this fix, the output looks correct now:
/nix/store/kn47hayxab8gc01jhr98dwyywbx561aq-nixos-system-roflmayr-21.11.20220207.6c202a9.drv
└───/nix/store/g8bpgfjhh5vxrdq0w6r6s64f9kkm9z6c-etc.drv
├───/nix/store/hm0jmhp8shbf3cl846a685nv4f5cp3fy-nspawn-inst.drv
| [...]
└───/nix/store/2d6q3ygiim9ijl5d4h0qqx6vnjgxywyr-system-units.drv
└───/nix/store/dil014y1b8qyjhhhf5fpaah5fzdf0bzs-unit-systemd-nspawn-hydra.service.drv
└───/nix/store/a9r72wwx8qrxyp7hjydyg0gsrwnn26zb-activate.drv
└───/nix/store/99hlc7i4gl77wq087lbhag4hkf3kvssj-nixos-system-hydra-21.11pre-git.drv
Bundlers are now responsible for correctly handling their inputs which
are no longer constrained to be (Drv->Drv)->Drv->Drv, but can be of
type (attrset->Drv)->attrset->Drv.
we'll retain the old coerceToString interface that returns a string, but callers
that don't need the returned value to outlive the Value it came from can save
copies by using the new interface instead. for values that weren't stringy we'll
pass a new buffer argument that'll be used for storage and shouldn't be
inspected.
- Make passing the position to `forceValue` mandatory,
this way we remember people that the position is
important for better error messages
- Add pos to all `forceValue` calls
if we defer the duplicate argument check for lambda formals we can use more
efficient data structures for the formals set, and we can get rid of the
duplication of formals names to boot. instead of a list of formals we've seen
and a set of names we'll keep a vector instead and run a sort+dupcheck step
before moving the parsed formals into a newly created lambda. this improves
performance on search and rebuild by ~1%, pure parsing gains more (about 4%).
this does reorder lambda arguments in the xml output, but the output is still
stable. this shouldn't be a problem since argument order is not semantically
important anyway.
before
nix search --no-eval-cache --offline ../nixpkgs hello
Time (mean ± σ): 8.550 s ± 0.060 s [User: 6.470 s, System: 1.664 s]
Range (min … max): 8.435 s … 8.666 s 20 runs
nix eval -f ../nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
Time (mean ± σ): 346.7 ms ± 2.1 ms [User: 312.4 ms, System: 34.2 ms]
Range (min … max): 343.8 ms … 353.4 ms 20 runs
nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.720 s ± 0.031 s [User: 2.415 s, System: 0.231 s]
Range (min … max): 2.662 s … 2.780 s 20 runs
after
nix search --no-eval-cache --offline ../nixpkgs hello
Time (mean ± σ): 8.462 s ± 0.063 s [User: 6.398 s, System: 1.661 s]
Range (min … max): 8.339 s … 8.542 s 20 runs
nix eval -f ../nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
Time (mean ± σ): 329.1 ms ± 1.4 ms [User: 296.8 ms, System: 32.3 ms]
Range (min … max): 326.1 ms … 330.8 ms 20 runs
nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.687 s ± 0.035 s [User: 2.392 s, System: 0.228 s]
Range (min … max): 2.626 s … 2.754 s 20 runs
Unless `--precise` is passed, make `nix why-depends` only show the
dependencies between the store paths, without introspecting them to
find the actual references.
This also makes it ~3x faster
This is needed to get the path of a derivation that might not exist
(e.g. for 'nix store copy-log').
InstallableStorePath::toDerivedPaths() cannot be used for this because
it calls readDerivation(), so it fails if the store doesn't have the
derivation.
When stderr is not connected to a tty, show "building" and
"substituting" messages, a-la nix-build et al.
Closes https://github.com/NixOS/nix/issues/4402
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
`nix why-depends` is piping its output into a pager by default.
However the pager was only started after the first path is printed,
causing it to be excluded from the pager output.
(Actually the pager was started *inside* the recursive function that was
printing the dependency chain, so a new instance was started at each
level. It’s a little miracle that it worked at all).
Fix#5911
when given a string yacc will copy the entire input to a newly allocated
location so that it can add a second terminating NUL byte. since the
parser is a very internal thing to EvalState we can ensure that having
two terminating NUL bytes is always possible without copying, and have
the parser itself merely check that the expected NULs are present.
# before
Benchmark 1: nix search --offline nixpkgs hello
Time (mean ± σ): 572.4 ms ± 2.3 ms [User: 563.4 ms, System: 8.6 ms]
Range (min … max): 566.9 ms … 579.1 ms 50 runs
Benchmark 2: nix eval -f ../nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
Time (mean ± σ): 381.7 ms ± 1.0 ms [User: 348.3 ms, System: 33.1 ms]
Range (min … max): 380.2 ms … 387.7 ms 50 runs
Benchmark 3: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.936 s ± 0.005 s [User: 2.715 s, System: 0.221 s]
Range (min … max): 2.923 s … 2.946 s 50 runs
# after
Benchmark 1: nix search --offline nixpkgs hello
Time (mean ± σ): 571.7 ms ± 2.4 ms [User: 563.3 ms, System: 8.0 ms]
Range (min … max): 566.7 ms … 579.7 ms 50 runs
Benchmark 2: nix eval -f ../nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
Time (mean ± σ): 376.6 ms ± 1.0 ms [User: 345.8 ms, System: 30.5 ms]
Range (min … max): 374.5 ms … 379.1 ms 50 runs
Benchmark 3: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.922 s ± 0.006 s [User: 2.707 s, System: 0.215 s]
Range (min … max): 2.906 s … 2.934 s 50 runs
Previously you had to remember to call value->attrs->sort() after
populating value->attrs. Now there is a BindingsBuilder helper that
wraps Bindings and ensures that sort() is called before you can use
it.
This was already accidentally disabled in ba87b08. It also no longer
appears to be beneficial, and in fact slow things down, e.g. when
evaluating a NixOS system configuration:
elapsed time: median = 3.8170 mean = 3.8202 stddev = 0.0195 min = 3.7894 max = 3.8600 [rejected, p=0.00000, Δ=0.36929±0.02513]
When a variable is assigned in the REPL, make sure to remove any possible reference to the old one so that we correctly pick the new one afterwards
Fix#5706
Doing it as a side-effect of calling LocalStore::makeStoreWritable()
is very ugly.
Also, make sure that stopping the progress bar joins the update
thread, otherwise that thread should be unshared as well.
When running a `:b` command in the repl, after building the derivations
query the store for its outputs rather than just assuming that they are
known in the derivation itself (which isn’t true for CA derivations)
Fix#5328
Rather than having them plain strings scattered through the whole
codebase, create an enum containing all the known experimental features.
This means that
- Nix can now `warn` when an unkwown experimental feature is passed
(making it much nicer to spot typos and spot deprecated features)
- It’s now easy to remove a feature altogether (once the feature isn’t
experimental anymore or is dropped) by just removing the field for the
enum and letting the compiler point us to all the now invalid usages
of it.
When I stop a download with Ctrl-C in a `nix repl` of a flake, the REPL
refuses to do any other downloads:
nix-repl> builtins.getFlake "nix-serve"
[0.0 MiB DL] downloading 'https://api.github.com/repos/edolstra/nix-serve/tarball/e9828a9e01a14297d15ca41 error: download of 'e9828a9e01' was interrupted
[0.0 MiB DL]
nix-repl> builtins.getFlake "nix-serve"
error: interrupted by the user
[0.0 MiB DL]
To fix this issue, two changes were necessary:
* Reset the global `_isInterrupted` variable: only because a single
operation was aborted, it should still be possible to continue the
session.
* Recreate a `fileTransfer`-instance if the current one was shut down by
an abort.
The boolean is only used to determine if the formals are set to a
non-null pointer in all our cases. We can get rid of that allocation and
instead just compare the pointer value with NULL. Saving up to
sizeof(bool) + platform specific alignment per ExprLambda instace.
Probably not a lot of memory but perhaps a few kilobyte with nixpkgs?
This also gets rid of a potential issue with dereferencing formals based on
the value of the boolean that didn't have to be aligned with the formals
pointer but was in all our cases.
I had started the trend of doing `std::visit` by value (because a type
error once mislead me into thinking that was the only form that
existed). While the optomizer in principle should be able to deal with
extra coppying or extra indirection once the lambdas inlined, sticking
with by reference is the conventional default. I hope this might even
improve performance.
It's now disabled by default for the following:
* 'nix search' (this was already implied by read-only mode)
* 'nix flake show'
* 'nix flake check', but only on the hydraJobs output
In dry run mode, new derivations can't be create, so running the command on anything that has not been evaluated before results in an error message of the form `don't know how to build these paths (may be caused by read-only store access)`.
For comparison, the classical `nix-build --dry-run` doesn't use read-only mode.
Closes#1795
(cherry picked from commit 54525682df707742e58311c32e9c9cb18de1e31f)
“packages” was probably meant to be “packages.${system}.” but that
is already listed in `getDefaultFlakeAttrPathPrefixes` in `installables`,
which is probably why no one noticed it was broken.
It currently fails with the following error:
error: flake 'git+file://…' does not provide attribute 'devShells.x86_64-linuxhaskell', 'packages.x86_64-linux.haskell', 'legacyPackages.x86_64-linux.haskell' or 'haskell'
For git+file and path flakes, chdir to flake directory so that phases
that expect to be in the flake directory can run
Fixes https://github.com/NixOS/nix/issues/3976
