Before, `-lnixutil` was just stuck in `nix-store.pc`, but that doesn't
seem so nice.
This prepares us to distribute `libnixutil` in a separate package if we
want, but it should be a good change either way. I suspect it wasn't
done before because libutil was an extra unstable interface, but I don't
think we need worry about that. *All* the C++ is less stable than the C
(or that's the goal at least).
For what it's worth, Lix also created this pkg-config file *en passant*
during their rename:
c97e17144e (diff-3c4f60cc44a0e35444c7f45331cfa50f76637118)
This re-enables support for older bwdgc versions without complicating
the code too much.
Coroutines generally only interfere with GC during source filtering,
so it's not too bad of a regression on older bdwgc.
This seems preferable over conditional compilation to enable the patch
etc; we've already spent a lot of complexity budget on this GC-coroutine
interaction...
Manually tested by printing to stderr in both branches (sp in os
stack, or not), and triggering a GC in a filterSource function,
e.g.:
let
generateTree = n: if n == 0 then "ha" else { left = generateTree (n - 1); right = generateTree (n - 1); };
in
builtins.deepSeq (generateTree 18) ...
Note that the darwin still uses the strategy of disabling GC, despite
having an implementation that compiles. The proper solution will be
enabled and tested later.
... so that we may perhaps later extend the interface.
Note that Nixpkgs' lib.warn already requires a string coercible
argument, so this is reasonable. Also note that string coercible
values aren't all strings, but in practice, for warn, they are.
Progress on #10832
This doesn't switch to auto-deriving the fields, but by defining `<=>`
we allow deriving `<=>` in downstream types where `Hash` is used.
Fixes assertion failure if outputsToInstall is empty by defaulting to the "out"
output. That is, behavior between the following commands should be consistent:
$ nix build --no-link --json .#nothing-to-install-no-out
error: derivation '/nix/store/eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee-nothing-to-install-no-out.drv' does not have wanted outputs 'out'
$ nix build --no-link --file default.nix --json nothing-to-install-no-out
error: derivation '/nix/store/eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee-nothing-to-install-no-out.drv' does not have wanted outputs 'out'
Real-world example of this issue:
$ nix build --json .#.legacyPackages.aarch64-linux.texlive.pkgs.iwona
error: derivation '/nix/store/dj0h6b0pnlnan5nidnhqa0bmzq4rv6sx-iwona-0.995b.drv' does not have wanted outputs 'out'
$ git rev-parse HEAD
eee33247cf6941daea8398c976bd2dda7962b125
$ nix build --json --file . texlive.pkgs.iwona
nix: src/libstore/outputs-spec.hh:46: nix::OutputsSpec::Names::Names(std::set<std::__cxx11::basic_string<char> >&&): Assertion `!empty()' failed.
Aborted (core dumped)
1. Fix build by making the legacy SSH Storey's secret `logFD` setting
not a setting on Windows. (It doesn't make sense to specify `void *`
handles by integer cross-proccess, I don't think.)
2. Move some files that don't need to be Unix-only anymore back to their
original locations.
Before:
$ nix flake lock --override-input nixpkgs gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent
fetching git input 'git+file:///home/linus/projects/lix'
fetching gitlab input 'gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent'
error: [json.exception.type_error.302] type must be string, but is null
After:
/tmp/inst/bin/nix flake lock --override-input nixpkgs gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent
warning: unknown experimental feature 'repl-flake'
error:
… while updating the lock file of flake 'git+file:///home/joerg/git/nix?ref=refs/heads/master&rev=62693c2c37c8edd92f95114eb1387b461fc671df'
… while updating the flake input 'nixpkgs'
… while fetching the input 'gitlab:simple-nixos-mailserver/nixos-mailserver/nonexistent'
error: No commits returned by GitLab API -- does the git ref really exist?
Adapted from: 3df013597d
This turns errors like:
error: flake output attribute 'hydraJobs' is not a derivation or path
into errors like:
error: expected flake output attribute 'hydraJobs' to be a derivation or
path but found a set: { binaryTarball = «thunk»; build = «thunk»; etc> }
This change affects all InstallableFlake commands.
Source: 20981461d4
Signed-off-by: Jörg Thalheim <joerg@thalheim.io>
* docs: mention importNative/exec in allow-unsafe-native-code-during-evaluation
Both of these still needs their own actual documentation, but they are
at least now mentioned that they exist and what they're enabled by.
Co-authored-by: Qyriad <qyriad@qyriad.me>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
- Get a rump derivation goal: hook instance will come later, local
derivation goal will come after that.
- Start cleaning up the channel / waiting code with an abstraction.
By moving `host` to the config, we can do a lot further cleanups and
dedups. This anticipates a world where we always go `StoreReference` ->
`*StoreConfig` -> `Store*` rather than skipping the middle step too.
Progress on #10766
Progress on https://github.com/NixOS/hydra/issues/1164
This increases test coverage, and gets the worker protocol ready to be
used by Hydra.
Why don't we just try to use the store interface in Hydra? Well, the
problem is that the store interface works on connection pools, with each
opreation getting potentially a different connection, but the way temp
roots work requires that we keep one logical "transaction" (temp root
session) using the same connection.
The longer-term solution probably is making connections themselves
implement the store interface, but that is something that builds on
this, so I feel OK that this is not churn in the wrong direction.
Fixes#9584
We don't want to rely on how C assigns numbers for enums in the wire
format. Sure, this is totally determined by the ABI, but it obscures the
code and makes it harder to safely change the enum definition (should we
need to) without accidentally breaking the wire format.
Do this instead of an unchecked cast
I redid this to use the serialisation framework (including a unit test),
but I am keeping the reference to credit Jade for spotting the issue.
Change-Id: Icf6af7935e8f139bef36b40ad475e973aa48855c
(adapted from commit 2a7a824d83dc5fb33326b8b89625685f283a743b)
Co-Authored-By: Jade Lovelace <lix@jade.fyi>
File not found while importing is not currently caught by the tab-completion handler.
Original bug report: https://git.lix.systems/lix-project/lix/issues/340
Fix has been adapted from https://gerrit.lix.systems/c/lix/+/1189
Example crash:
$ cat /tmp/foo.nix
{
someImport = import ./this_file_does_not_exist;
}
$ ./src/nix/nix repl --file /tmp/foo.nix
warning: unknown experimental feature 'repl-flake'
Nix 2.23.0pre20240517_dirty
Type :? for help.
Loading installable ''...
Added 1 variables.
nix-repl> someImport.<TAB>
This way we can commit the same amount of stack size (64 MB) without a conditional.
Includes nix, libnixexpr-tests, libnixfetchers-tests, libnixstore-tests, libnixutil-tests.
https://github.com/NixOS/nix/pull/10555 added a check requiring
that output parameters always have an uninitialized Value as argument.
Unfortunately the output parameter of the primop callback received
a thunk instead.
See the comment for implementation considerations.
This was accidentally removed in
e989c83b44. I restored it and also did a
few other cleanups:
- Make a static method for namespacing purposes
- Put the test files in the data dir with the other test data
- Avoid mutating globals in the machine config tests
This will be used by Hydra.
Need to decouple parsing from actually opening a store for Machine
configs.
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
In particular `local://<path>` and `unix://` (without any path) now
work, and mean the same things as `local` and `daemon`, respectively. We
thus now have the opportunity to desguar `local` and `daemon` early.
This will allow me to make a change to
https://github.com/NixOS/nix/pull/9839 requested during review to
desugar those earlier.
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
1. Hydra currently queries for multiple path infos at once, so let us
make a connection item for that.
2. The minimum of the two versions should always be used, see #9584.
(The issue remains open because the daemon protocol needs to be
likewise updated.)
The JSON format no longer uses the legacy ATerm `r:` prefixing nonsese,
but separate fields.
Progress on #9866
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Basically I'd expect the same behavior as with `nix-build`, i.e.
with `--keep-going` the hash-mismatch error of each failing
fixed-output derivation is shown.
The approach is derived from `Store::buildPaths` (`entry-point.cc`):
instead of throwing the first build-result, check if there are any build
errors and if so, display all of them and throw after that.
Unfortunately, the BuildResult struct doesn't have an `ErrorInfo`
(there's a FIXME for that at least), so I have to construct my own here.
This is a rather cheap bugfix and I decided against touching too many
parts of libstore for that (also I don't know if that's in line with the
ongoing refactoring work).
Closes https://git.lix.systems/lix-project/lix/issues/302
Change-Id: I378ab984fa271e6808c6897c45e0f070eb4c6fac
Signed-off-by: Jörg Thalheim <joerg@thalheim.io>
On several occasions I've found myself confused when trying to delete
a store path, because I am told it's still alive, but
nix-store --query --roots doesn't show anything. Let's save future
users this confusion by mentioning that a path might be alive due to
having referrers, not just roots.
In addition:
- Take the opportunity to add a bunch more missing hyperlinks, too.
- Remove some glossary entries that are now subsumed by dedicated pages.
We used to not be able to do this without breaking link fragments, but
now we can, so pick up where we left off.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
This is useful for diagnosing whether an evaluation is copying large
paths to the store. Example:
$ nix build .#packages.x86_64-linux.default --large-path-warning-threshold 1000000
warning: copied large path '/home/eelco/Dev/nix-master/' to the store (6271792 bytes)
warning: copied large path '«github:NixOS/nixpkgs/b550fe4b4776908ac2a861124307045f8e717c8e?narHash=sha256-7kkJQd4rZ%2BvFrzWu8sTRtta5D1kBG0LSRYAfhtmMlSo%3D»/' to the store (155263768 bytes)
warning: copied large path '«github:libgit2/libgit2/45fd9ed7ae1a9b74b957ef4f337bc3c8b3df01b5?narHash=sha256-oX4Z3S9WtJlwvj0uH9HlYcWv%2Bx1hqp8mhXl7HsLu2f0%3D»/' to the store (22175416 bytes)
warning: copied large path '/nix/store/z985088mcd6w23qwdlirsinnyzayagki-source' to the store (5885872 bytes)
This fixes https://github.com/NixOS/nixpkgs/pull/290775 by not expanding aliases
when sourcing the stdenv setup script. The way bash handles aliases is to expand
them when a function is defined, not when it is used. I.e.:
$ alias echo="echo bar "
$ echo foo
bar foo
$ xyzzy() { echo foo; }
$ shopt -u expand_aliases
$ xyzzy
bar foo
$ xyzzy2() { echo foo; }
$ xyzzy2
foo
The problem is that ~/.bashrc is sourced before the stdenv setup, and bashrc
commonly sets aliases for ‘cp’, ‘mv’ and ‘rm’ which you don’t want to take
effect in the stdenv derivation builders. The original commit introducing this
feature (5fd8cf7667) even mentioned this very
alias.
The only way to avoid this is to disable aliases entirely while sourcing the
stdenv setup, and reenable them afterwards.
Passing the commit message as an argument causes update failures on repositories with lots of flake inputs. In some cases, the commit message is over 250,000 bytes.
the old `copyFile` was just a wrapper that was calling the `copy`
function. This wrapper function is removed and the `copy` function is
renamed to `copyFile`.
Building derivations is a lot harder, but the downloading goals is
portable enough.
The "common channel" code is due to Volth. I wonder if there is a way we
can factor it out into separate functions / files to avoid some
within-function CPP.
Co-authored-by: volth <volth@volth.com>
In streaming mode, libarchive doesn't handle symlinks in zip files
correctly. So write the entire file to disk so libarchive can access
it in random-access mode.
Fixes#10649. This was broken in cabee98152.
* Document string context
Now what we have enough primops, we can document how string contexts
work.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Co-authored-by: Felix Uhl <iFreilicht@users.noreply.github.com>
builtins.strictDerivation returns an attribute set with drvPath and
output paths. For some reason, current implementation forbids drv
instead of drvPath.
Sometimes we read a directory with children we cannot stat. It's a pitty
we even try to stat at all (wasteful) in the `DT_UNKNOWN` case, but at
least this should get rid of the failure.
This was changed in #10611, which caused the derivation paths of
anything using builtin:fetchurl to change (i.e. all of
Nixpkgs). However, impureEnvVars doesn't actually do anything for
builtin:fetchurl, so we can just set it to its historical value.
This makes for shorter and more portable code.
The only tricky part is catching exceptions: I just searched for near by
`catch (Error &)` or `catch (SysError &)` and adjusted them to `catch
(std::filesystem::filesystem_error &)` according to my human judgement.
Good for windows portability; will help @siddhantk232 with his GSOC
project.
Different parts of the project honor different sets of proxy environment
variables. With this commit all parts of the project will honor the same
set of proxy environment variables.
---------
Co-authored-by: Your Name <you@example.com>
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems>
Now that SourcePath uses a SourceAccessor instead of an InputAccessor,
we can use it in function signatures instead of passing a
SourceAccessor and CanonPath separately.
Make sure that `extraSandboxProfile` is set before we check whether it's
empty or not (in the `sandbox=true` case).
Also adds a test case for this.
Co-Authored-By: Artemis Tosini <lix@artem.ist>
Co-Authored-By: Eelco Dolstra <edolstra@gmail.com>
After the removal of the InputAccessor::fetchToStore() method, the
only remaining functionality in InputAccessor was `fingerprint` and
`getLastModified()`, and there is no reason to keep those in a
separate class.
Fix formatting violations, update blacklist to reflect moved files.
PR #10556 passed CI before the new formating rules were added, and our
CI has the race condition of allowing old results, resulting in master
getting broken.
This missing GC root wasn't much of a problem before, because the
heap would end up with a reference to the `baseEnv` pretty soon,
but when unit testing, the construction of `EvalState` doesn't
necessarily happen well before GC runs for the first time.
Found while unit testing the Rust bindings that currently reside
at https://github.com/nixops4/nixops4/tree/main/rust
Add a method to check if a value has been initialized. This helps avoid
segfaults when calling `type()`.
Useful in the context of the new C API.
Closes#10524
Windows now has some basic Unix Domain Socket support, see
https://devblogs.microsoft.com/commandline/af_unix-comes-to-windows/
Building `nix daemon` on Windows I've left for later, because the daemon
currently forks per connection but this is not an option on Windows. But
we can get the client part working right away.
With Linux kernel >=6.6 & glibc 2.39 a `fchmodat2(2)` is available that
isn't filtered away by the libseccomp sandbox.
Being able to use this to bypass that restriction has surprising results
for some builds such as lxc[1]:
> With kernel ≥6.6 and glibc 2.39, lxc's install phase uses fchmodat2,
> which slips through 9b88e52846/src/libstore/build/local-derivation-goal.cc (L1650-L1663).
> The fixupPhase then uses fchmodat, which fails.
> With older kernel or glibc, setting the suid bit fails in the
> install phase, which is not treated as fatal, and then the
> fixup phase does not try to set it again.
Please note that there are still ways to bypass this sandbox[2] and this is
mostly a fix for the breaking builds.
This change works by creating a syscall filter for the `fchmodat2`
syscall (number 452 on most systems). The problem is that glibc 2.39
and seccomp 2.5.5 are needed to have the correct syscall number available
via `__NR_fchmodat2` / `__SNR_fchmodat2`, but this flake is still on
nixpkgs 23.11. To have this change everywhere and not dependent on the
glibc this package is built against, I added a header
"fchmodat2-compat.hh" that sets the syscall number based on the
architecture. On most platforms its 452 according to glibc with a few
exceptions:
$ rg --pcre2 'define __NR_fchmodat2 (?!452)'
sysdeps/unix/sysv/linux/x86_64/x32/arch-syscall.h
58:#define __NR_fchmodat2 1073742276
sysdeps/unix/sysv/linux/mips/mips64/n32/arch-syscall.h
67:#define __NR_fchmodat2 6452
sysdeps/unix/sysv/linux/mips/mips64/n64/arch-syscall.h
62:#define __NR_fchmodat2 5452
sysdeps/unix/sysv/linux/mips/mips32/arch-syscall.h
70:#define __NR_fchmodat2 4452
sysdeps/unix/sysv/linux/alpha/arch-syscall.h
59:#define __NR_fchmodat2 562
I tested the change by adding the diff below as patch to
`pkgs/tools/package-management/nix/common.nix` & then built a VM from
the following config using my dirty nixpkgs master:
{
vm = { pkgs, ... }: {
virtualisation.writableStore = true;
virtualisation.memorySize = 8192;
virtualisation.diskSize = 12 * 1024;
nix.package = pkgs.nixVersions.nix_2_21;
};
}
The original issue can be triggered via
nix build -L github:nixos/nixpkgs/d6dc19adbda4fd92fe9a332327a8113eaa843894#lxc \
--extra-experimental-features 'nix-command flakes'
however the problem disappears with this patch applied.
Closes#10424
[1] https://github.com/NixOS/nixpkgs/issues/300635#issuecomment-2031073804
[2] https://github.com/NixOS/nixpkgs/issues/300635#issuecomment-2030844251
With Nix 2.3, it was possible to pass a subpath of a store path to
exportReferencesGraph:
with import <nixpkgs> {};
let
hello = writeShellScriptBin "hello" ''
echo ${toString builtins.currentTime}
'';
in
writeClosure [ "${hello}/bin/hello" ]
This regressed with Nix 2.4, with a very confusing error message, that
presumably indicates it was unintentional:
error: path '/nix/store/3gl7kgjr4pwf03f0x70dgx9ln3bhl7zc-hello/bin/hello' is not in the Nix store
At this point many features are stripped out, but this works:
- Can run libnix{util,store,expr} unit tests
- Can run some Nix commands
Co-Authored-By volth <volth@volth.com>
Co-Authored-By Brian McKenna <brian@brianmckenna.org>
This also reworks the Mercurial fetcher (which was still using the
old cache interface) to have two distinct cache mappings:
* A ref-to-rev mapping, which is store-independent.
* A rev-to-store-path mapping.
Code operating on store objects (including creating them) should, in
general, use `ContentAddressMethod` rather than `FileIngestionMethod`.
See also dfc876531f which included some
similar refactors.
See https://github.com/NixOS/nix/pull/8699#discussion_r1554312181
Casting a function pointer to `void*` is undefined behavior in the C
spec, since there are platforms with different sizes for these two kinds
of pointers. A safe alternative might be `void (*callback)()`
* add intermediate variables and clarifying comments
Co-authored-by: Alexander Groleau <alex@proof.construction>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
https://github.com/NixOS/nix/pull/10456 fixed the addition of symlink
store paths to the sandbox, but also made it so that the hardcoded
sandbox paths (like `/etc/hosts`) were now bind-mounted without
following the possible symlinks. This made these files unreadable if
there were symlinks (because the sandbox would now contain a symlink to
an unreachable file rather than the underlying file).
In particular, this broke FOD derivations on NixOS as `/etc/hosts` is a
symlink there.
Fix that by canonicalizing all these hardcoded sandbox paths before
adding them to the sandbox.
Like always declining; local builds only, as can be inferred from the
docs. (Not worth spending too many words on this pretty obvious
behavior, I think. Also, plans to remove it? https://github.com/NixOS/nix/issues/1221)
This requires moving resolveSymlinks() into SourceAccessor. Also, it
requires LocalStoreAccessor::maybeLstat() to work on parents of the
store (to avoid an error like "/nix is not in the store").
Fixes#10375.
Instead of relying on setup script to set output variables when
structured attributes are enabled, iterate over the values of an
outputs associative array.
See also
374fa3532e/pkgs/stdenv/generic/setup.sh (L23-L26)
Bind-mounting symlinks is apparently not possible, which is why the
thing was failing.
Fortunately, symlinks are small, so we can fallback to copy them at no cost.
Fix https://github.com/NixOS/nix/issues/9579
Co-authored-by: Artturin <Artturin@artturin.com>
Now that we have a few things identifying content address methods by
name, we should be consistent about it.
Move up the `parseHashAlgoOpt` for tidiness too.
Discussed this change for consistency's sake as part of #8876
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
This was used in only one place, namely builtins.fetchurl with an
expected hash. Since this can cause similar issues as described
in #9814 and #9905 with the "locked" flag for fetchTarball and fetchTree,
let's just remove it.
Note that if an expected hash is given and the hash algorithm is
SHA-256, then we will never do a download anyway if the resulting
store path already exists. So removing the "locked" flag will only
cause potentially unnecessary HTTP requests (subject to the tarball
TTL) for non-SHA-256 hashes.
This probably snuck in in a refactor using truthiness or so. The
trustedness flag was having the optional fullness checked, rather than
the actual contained trust level.
Also adds some tests.
```
m1@6876551b-255d-4cb0-af02-8a4f17b27e2e ~ % nix store ping
warning: 'nix store ping' is a deprecated alias for 'nix store info'
Store URL: daemon
Version: 2.20.4
Trusted: 0
m1@6876551b-255d-4cb0-af02-8a4f17b27e2e ~ % nix doctor
warning: 'doctor' is a deprecated alias for 'config check'
[PASS] PATH contains only one nix version.
[PASS] All profiles are gcroots.
[PASS] Client protocol matches store protocol.
[INFO] You are trusted by store uri: daemon
```
code blocks, if not surrounded by empty lines, have the language
tags (in these cases, always `nix`) show up in the output of :doc.
for example:
nix-repl> :doc builtins.parseFlakeRef
Synopsis: builtins.parseFlakeRef flake-ref
Parse a flake reference, and return its exploded form.
For example: nix builtins.parseFlakeRef
"github:NixOS/nixpkgs/23.05?dir=lib" evaluates to: nix { dir =
"lib"; owner = "NixOS"; ref = "23.05"; repo = "nixpkgs"; type =
"github"; }
is now instead:
nix-repl> :doc builtins.parseFlakeRef
Synopsis: builtins.parseFlakeRef flake-ref
Parse a flake reference, and return its exploded form.
For example:
| builtins.parseFlakeRef "github:NixOS/nixpkgs/23.05?dir=lib"
evaluates to:
| { dir = "lib"; owner = "NixOS"; ref = "23.05"; repo = "nixpkgs"; type = "github"; }
When querying all paths in a binary cache store, the path's representation
is `<hash>-x` (where `x` is the value of `MissingName`) because the .narinfo
filenames only contain the hash.
Before cc46ea1630 this worked correctly,
because the entire path info was read and the path from this
representation was printed, i.e. in the form `<hash>-<name>`. Since then
however, the direct result from `queryAllValidPaths()` was used as `path`.
Added a regression test to make sure the behavior remains correct.
This was part of approved PR #10021. Unfortunately that one is stalled
on a peculiar Linux test timeout, so trying to get bits of it merged
first to bisect failure.
Forcing a conditional include, vs making the headers content
conditional, I think is more maintainable.
It is also how the other platform-specific headers (like
`namespaces.hh`) have been adapted.
A possible use of them might have been to figure out the paths
(which can now be retrieved with maybePathsOut), but I have
not found evidence that it was used this way, and it would have
been broken, because non-CA outputs weren't recorded in the map.
It's a little weird we don't check the return status for these, but
changing that would introduce risk so I did not.
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
This introduces new utility functions to get elements from JSON — in an ergonomic way and with nice error messages if the expected type does not match.
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems>
This splits files and adds new identifiers in preperation for supporting
windows, but no Windows-specific code is actually added yet.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
This patch makes `makeDecompressionSink` strip only a single layer
of compression specified via method. This fixes erroneous decompression
of doubly-compressed NARs fetched with curl.
This function is nice for more than `PosixSourceAccessor`. We can make a
few things simpler with it.
Note that the error logic slightly changes in some of the call sites, in
that we also count `ENOTDIR` and not just `ENOENT` as not having the
file, but that should be fine.
HintFmt(string) invokes the HintFmt("%s", literal) constructor,
which is not what we want here. Add a constructor with a proper name
and call that.
Next step: rename all the other ones to HintFmt::literal(string).
Fixes https://github.com/NixOS/nix/issues/10238
Thunks are now overwritten by a helper function
`Value::finishValue(newType, payload)` (where `payload` is the
original anonymous union inside `Value`). This helps to ensure we
never update a value elsewhere, since that would be incompatible with
parallel evaluation (i.e. after a value has transitioned from being a
thunk to being a non-thunk, it should be immutable).
There were two places where this happened: `Value::mkString()` and
`ExprAttrs::eval()`.
This PR also adds a bunch of accessor functions for value contents,
like `Value::integer()` to access the integer field in the union.
Fixes an instance of
nix: src/libutil/util.cc:139: nix::Path nix::canonPath(PathView, bool): Assertion `path != ""' failed.
... which I've been getting in one of my shells for some reason.
I have yet to find out why TMPDIR was empty, but it's no reason for
Nix to break.
Fixes
terminate called after throwing an instance of 'boost::wrapexcept<boost::io::too_few_args>'
what(): boost::too_few_args: format-string referred to more arguments than were passed
Aborted (core dumped)
for type errors in AttrCursor.
In a daemon-based Nix setup, some options cannot be overridden by a
client unless the client's user is considered trusted.
Currently, if an untrusted user tries to override one of those
options, we are silently ignoring it.
This can be pretty confusing in certain situations.
e.g. a user thinks he disabled the sandbox when in reality he did not.
We are now sending a warning message letting know the user some options
have been ignored.
Related to #1761.
This is a cherry-pick of 9e0f5f803f.
The above commit has been reverted by
a59e77d9e5 to prevent spamming warnings
with experimental features, but these are now totally ignored on the
daemon side, so there's no reason for the revert any more.
Previously, `state.mkList()` would set the type of the value to tList
and allocate the list vector, but it would not initialize the values
in the list. This has two problems:
* If an exception occurs, the list is left in an undefined state.
* More importantly, for multithreaded evaluation, if a value
transitions from thunk to non-thunk, it should be final (i.e. other
threads should be able to access the value safely).
To address this, there now is a `ListBuilder` class (analogous to
`BindingsBuilder`) to build the list vector prior to the call to
`Value::mkList()`. Typical usage:
auto list = state.buildList(size);
for (auto & v : list)
v = ... set value ...;
vRes.mkList(list);
* Add regression test
* Fix 'no repo' test so it doesn't succeed if the data is still in cache
* Use git_revparse_single inside git-utils instead of reimplementing the same logic.
Previously, errors while printing values in `nix repl` would be printed
in `«error: ...»` brackets rather than displayed normally:
```
nix-repl> legacyPackages.aarch64-darwin.pythonPackages.APScheduler
«error: Package ‘python-2.7.18.7’ in /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/cpython/2.7/default.nix:335 is marked as insecure, refusing to evaluate.»
```
Now, errors will be displayed normally if they're emitted at the
top-level of an expression:
```
nix-repl> legacyPackages.aarch64-darwin.pythonPackages.APScheduler
error:
… in the condition of the assert statement
at /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/lib/customisation.nix:268:17:
267| in commonAttrs // {
268| drvPath = assert condition; drv.drvPath;
| ^
269| outPath = assert condition; drv.outPath;
… in the left operand of the OR (||) operator
at /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/passthrufun.nix:28:45:
27| if lib.isDerivation value then
28| lib.extendDerivation (valid value || throw "${name} should use `buildPythonPackage` or `toPythonModule` if it is to be part of the Python packages set.") {} value
| ^
29| else
(stack trace truncated; use '--show-trace' to show the full trace)
error: Package ‘python-2.7.18.7’ in /nix/store/6s0m1qc31zw3l3kq0q4wd5cp3lqpkq0q-source/pkgs/development/interpreters/python/cpython/2.7/default.nix:335 is marked as insecure, refusing to evaluate.
```
Errors emitted in nested structures (like e.g. when printing `nixpkgs`)
will still be printed in brackets.
Strings are now printed directly when evaluated by `:print`, rather than
escaped. This makes it easier to debug multi-line strings or strings
containing quotes, like the results of `builtins.readFile`,
`lib.toShellArg`, and so on.
```
nix-repl> "cuppy\ndog\ncity"
"cuppy\ndog\ncity"
nix-repl> :p "cuppy\ndog\ncity"
cuppy
dog
city
```
Fixes this very long warning, which I'll only include the first line of:
/nix/store/8wrjhrycpshhc3b41xmjwvgqr2m3yajq-libcxx-16.0.6-dev/include/c++/v1/__memory/construct_at.h:66:5: warning: destructor called on non-final 'RegexMatcher' that has virtual functions but non-virtual destructor [-Wdelete-non-abstract-non-virtual-dtor]
__loc->~_Tp();
`nix eval` forces values and prints derivations as attribute sets, so
commands that print derivations (e.g. `nix eval nixpkgs#bash`) will
infinitely loop and segfault.
Printing derivations as `.drv` paths makes `nix eval` complete as
expected. Further work is needed, but this is better than a segfault.
This wasn't caught by CI because #10149 and #10152 pass
individually... It doesn't happen on lazy-trees either because we
never try to fetch relative path flakes (#10089).
we now keep not a table of all positions, but a table of all origins and
their sizes. position indices are now direct pointers into the virtual
concatenation of all parsed contents. this slightly reduces memory usage
and time spent in the parser, at the cost of not being able to report
positions if the total input size exceeds 4GiB. this limit is not unique
to nix though, rustc and clang also limit their input to 4GiB (although
at least clang refuses to process inputs that are larger, we will not).
this new 4GiB limit probably will not cause any problems for quite a
while, all of nixpkgs together is less than 100MiB in size and already
needs over 700MiB of memory and multiple seconds just to parse. 4GiB
worth of input will easily take multiple minutes and over 30GiB of
memory without even evaluating anything. if problems *do* arise we can
probably recover the old table-based system by adding some tracking to
Pos::Origin (or increasing the size of PosIdx outright), but for time
being this looks like more complexity than it's worth.
since we now need to read the entire input again to determine the
line/column of a position we'll make unsafeGetAttrPos slightly lazy:
mostly the set it returns is only used to determine the file of origin
of an attribute, not its exact location. the thunks do not add
measurable runtime overhead.
notably this change is necessary to allow changing the parser since
apparently nothing supports nix's very idiosyncratic line ending choice
of "anything goes", making it very hard to calculate line/column
positions in the parser (while byte offsets are very easy).
this needs a string comparison because there seems to be no other way to
get that information out of bison. usually the location info is going to
be correct (pointing at a bad token), but since EOF isn't a token as
such it'll be wrong in that this case.
this hasn't shown up much so far because a single line ending *is* a
token, so any file formatted in the usual manner (ie, ending in a line
ending) would have its EOF position reported correctly.
the parser treats a plain \r as a newline, error reports do not. this
can lead to interesting divergences if anything makes use of this
feature, with error reports pointing to wrong locations in the input (or
even outside the input altogether).
previously we reported the error at the beginning of the binding
block (for plain inherits) or the beginning of the attr list (for
inherit-from), effectively hiding where exactly the error happened.
this also carries over to runtime positions of attributes in sets as
reported by unsafeGetAttrPos. we're not worried about this changing
observable eval behavior because it *is* marked unsafe, and the new
behavior is much more useful.
we already normalize attr order to lexicographic, doing the same for
formals makes sense. doubly so because the order of formals would
otherwise depend on the context of the expression, which is not quite as
useful as one might expect.
the parser modifies its inputs, which means that sharing them between
the error context reporting system and the parser itself can confuse the
reporting system. usually this led to early truncation of error context
reports which, while not dangerous, can be quite confusing.
