This is needed to get the path of a derivation that might not exist
(e.g. for 'nix store copy-log').
InstallableStorePath::toDerivedPaths() cannot be used for this because
it calls readDerivation(), so it fails if the store doesn't have the
derivation.
When stderr is not connected to a tty, show "building" and
"substituting" messages, a-la nix-build et al.
Closes https://github.com/NixOS/nix/issues/4402
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
gives about 1% improvement on system eval, a bit less on nix search.
# before
nix search --no-eval-cache --offline ../nixpkgs hello
Time (mean ± σ): 7.419 s ± 0.045 s [User: 6.362 s, System: 0.794 s]
Range (min … max): 7.335 s … 7.517 s 20 runs
nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.921 s ± 0.023 s [User: 2.626 s, System: 0.210 s]
Range (min … max): 2.883 s … 2.957 s 20 runs
# after
nix search --no-eval-cache --offline ../nixpkgs hello
Time (mean ± σ): 7.370 s ± 0.059 s [User: 6.333 s, System: 0.791 s]
Range (min … max): 7.286 s … 7.541 s 20 runs
nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.891 s ± 0.033 s [User: 2.606 s, System: 0.210 s]
Range (min … max): 2.823 s … 2.958 s 20 runs
`nix why-depends` is piping its output into a pager by default.
However the pager was only started after the first path is printed,
causing it to be excluded from the pager output.
(Actually the pager was started *inside* the recursive function that was
printing the dependency chain, so a new instance was started at each
level. It’s a little miracle that it worked at all).
Fix#5911
mainly to avoid an allocation and a copy of a string that can be
modified in place (ever since EvalState holds on to the buffer, not the
generated parser itself).
# before
Benchmark 1: nix search --offline nixpkgs hello
Time (mean ± σ): 571.7 ms ± 2.4 ms [User: 563.3 ms, System: 8.0 ms]
Range (min … max): 566.7 ms … 579.7 ms 50 runs
Benchmark 2: nix eval -f ../nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
Time (mean ± σ): 376.6 ms ± 1.0 ms [User: 345.8 ms, System: 30.5 ms]
Range (min … max): 374.5 ms … 379.1 ms 50 runs
Benchmark 3: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.922 s ± 0.006 s [User: 2.707 s, System: 0.215 s]
Range (min … max): 2.906 s … 2.934 s 50 runs
# after
Benchmark 1: nix search --offline nixpkgs hello
Time (mean ± σ): 570.4 ms ± 2.8 ms [User: 561.3 ms, System: 8.6 ms]
Range (min … max): 564.6 ms … 578.1 ms 50 runs
Benchmark 2: nix eval -f ../nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
Time (mean ± σ): 375.4 ms ± 1.3 ms [User: 343.2 ms, System: 31.7 ms]
Range (min … max): 373.4 ms … 378.2 ms 50 runs
Benchmark 3: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.925 s ± 0.006 s [User: 2.704 s, System: 0.219 s]
Range (min … max): 2.910 s … 2.942 s 50 runs
when given a string yacc will copy the entire input to a newly allocated
location so that it can add a second terminating NUL byte. since the
parser is a very internal thing to EvalState we can ensure that having
two terminating NUL bytes is always possible without copying, and have
the parser itself merely check that the expected NULs are present.
# before
Benchmark 1: nix search --offline nixpkgs hello
Time (mean ± σ): 572.4 ms ± 2.3 ms [User: 563.4 ms, System: 8.6 ms]
Range (min … max): 566.9 ms … 579.1 ms 50 runs
Benchmark 2: nix eval -f ../nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
Time (mean ± σ): 381.7 ms ± 1.0 ms [User: 348.3 ms, System: 33.1 ms]
Range (min … max): 380.2 ms … 387.7 ms 50 runs
Benchmark 3: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.936 s ± 0.005 s [User: 2.715 s, System: 0.221 s]
Range (min … max): 2.923 s … 2.946 s 50 runs
# after
Benchmark 1: nix search --offline nixpkgs hello
Time (mean ± σ): 571.7 ms ± 2.4 ms [User: 563.3 ms, System: 8.0 ms]
Range (min … max): 566.7 ms … 579.7 ms 50 runs
Benchmark 2: nix eval -f ../nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
Time (mean ± σ): 376.6 ms ± 1.0 ms [User: 345.8 ms, System: 30.5 ms]
Range (min … max): 374.5 ms … 379.1 ms 50 runs
Benchmark 3: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.922 s ± 0.006 s [User: 2.707 s, System: 0.215 s]
Range (min … max): 2.906 s … 2.934 s 50 runs
speeds up parsing by ~3%, system builds by a bit more than 1%
# before
Benchmark 1: nix search --offline nixpkgs hello
Time (mean ± σ): 574.7 ms ± 2.8 ms [User: 566.3 ms, System: 8.0 ms]
Range (min … max): 569.2 ms … 580.7 ms 50 runs
Benchmark 2: nix eval -f ../nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
Time (mean ± σ): 394.4 ms ± 0.8 ms [User: 361.8 ms, System: 32.3 ms]
Range (min … max): 392.7 ms … 395.7 ms 50 runs
Benchmark 3: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.976 s ± 0.005 s [User: 2.757 s, System: 0.218 s]
Range (min … max): 2.966 s … 2.990 s 50 runs
# after
Benchmark 1: nix search --offline nixpkgs hello
Time (mean ± σ): 572.4 ms ± 2.3 ms [User: 563.4 ms, System: 8.6 ms]
Range (min … max): 566.9 ms … 579.1 ms 50 runs
Benchmark 2: nix eval -f ../nixpkgs/pkgs/development/haskell-modules/hackage-packages.nix
Time (mean ± σ): 381.7 ms ± 1.0 ms [User: 348.3 ms, System: 33.1 ms]
Range (min … max): 380.2 ms … 387.7 ms 50 runs
Benchmark 3: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.936 s ± 0.005 s [User: 2.715 s, System: 0.221 s]
Range (min … max): 2.923 s … 2.946 s 50 runs
every stringy token the lexer returns is turned into a Symbol and not
used further, so we don't have to strdup. using a string_view is
sufficient, but due to limitations of the current parser we have to use
a POD type that holds the same information.
gives ~2% on system build, 6% on search, 8% on parsing alone
# before
Benchmark 1: nix search --offline nixpkgs hello
Time (mean ± σ): 610.6 ms ± 2.4 ms [User: 602.5 ms, System: 7.8 ms]
Range (min … max): 606.6 ms … 617.3 ms 50 runs
Benchmark 2: nix eval -f hackage-packages.nix
Time (mean ± σ): 430.1 ms ± 1.4 ms [User: 393.1 ms, System: 36.7 ms]
Range (min … max): 428.2 ms … 434.2 ms 50 runs
Benchmark 3: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 3.032 s ± 0.005 s [User: 2.808 s, System: 0.223 s]
Range (min … max): 3.023 s … 3.041 s 50 runs
# after
Benchmark 1: nix search --offline nixpkgs hello
Time (mean ± σ): 574.7 ms ± 2.8 ms [User: 566.3 ms, System: 8.0 ms]
Range (min … max): 569.2 ms … 580.7 ms 50 runs
Benchmark 2: nix eval -f hackage-packages.nix
Time (mean ± σ): 394.4 ms ± 0.8 ms [User: 361.8 ms, System: 32.3 ms]
Range (min … max): 392.7 ms … 395.7 ms 50 runs
Benchmark 3: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.976 s ± 0.005 s [User: 2.757 s, System: 0.218 s]
Range (min … max): 2.966 s … 2.990 s 50 runs
there's a few symbols in primops we can create once and pick them out of
EvalState afterwards instead of creating them every time we need them. this
gives almost 1% speedup to an uncached nix search.
there's a couple places that can be easily converted from using strings to using
string_views instead. gives a slight (~1%) boost to system eval.
# before
nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.946 s ± 0.026 s [User: 2.655 s, System: 0.209 s]
Range (min … max): 2.905 s … 2.995 s 20 runs
# after
Time (mean ± σ): 2.928 s ± 0.024 s [User: 2.638 s, System: 0.211 s]
Range (min … max): 2.893 s … 2.970 s 20 runs
this avoids one copy from `s` into `str`, and possibly another copy needed to
construct `s` at the call site. lexical_cast is also more efficient in general.
constructing an ostringstream for non-string concats (like integer addition) is
a small constant cost that we can avoid. for string concats we can keep all the
string temporaries we get from coerceToString and concatenate them in one go,
which saves a lot of intermediate temporaries and copies in ostringstream. we
can also avoid copying the concatenated string again by directly allocating it
in GC memory and moving ownership of the concatenated string into the target
value.
saves about 2% on system eval.
before:
Benchmark 1: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.837 s ± 0.031 s [User: 2.562 s, System: 0.191 s]
Range (min … max): 2.796 s … 2.892 s 20 runs
after:
Benchmark 1: nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
Time (mean ± σ): 2.790 s ± 0.035 s [User: 2.532 s, System: 0.187 s]
Range (min … max): 2.722 s … 2.836 s 20 runs
There already existed a smoke test for the link content length,
but it appears that there exists some corruptions pernicious enough
to replace the file content with zeros, and keeping the same length.
--repair-path now goes as far as checking the content of the link,
making it true to its name and actually repairing the path for such
coruption cases.
we don't have to create an ostream sentry object for every character of a JSON
string we write. format a bunch of characters and flush them to the stream all
at once instead.
this doesn't affect small numbers of string characters, but larger numbers of
total JSON string characters written gain a lot. at 1MB of total string written
we gain almost 30%, at 16MB it's almost a factor of 3x. large numbers of JSON
string characters do occur naturally in a nixos system evaluation to generate
documentation (though this is now somewhat mitigated by caching the largest part
of nixos option docs).
benchmarked with
hyperfine 'nix eval --raw --expr "let s = __concatStringsSep \"\" (__genList (_: \"c\") 256); in __toJSON (__genList (_: s) {e})"' --warmup 1 -L e 1,4,256,4096,65536
before:
Benchmark 1: nix eval --raw --expr "let s = __concatStringsSep \"\" (__genList (_: \"c\") 256); in __toJSON (__genList (_: s) 1)"
Time (mean ± σ): 12.5 ms ± 0.2 ms [User: 9.2 ms, System: 4.0 ms]
Range (min … max): 11.9 ms … 13.1 ms 223 runs
Benchmark 2: nix eval --raw --expr "let s = __concatStringsSep \"\" (__genList (_: \"c\") 256); in __toJSON (__genList (_: s) 4)"
Time (mean ± σ): 12.5 ms ± 0.2 ms [User: 9.3 ms, System: 3.8 ms]
Range (min … max): 11.9 ms … 13.2 ms 220 runs
Benchmark 3: nix eval --raw --expr "let s = __concatStringsSep \"\" (__genList (_: \"c\") 256); in __toJSON (__genList (_: s) 256)"
Time (mean ± σ): 13.2 ms ± 0.3 ms [User: 9.8 ms, System: 4.0 ms]
Range (min … max): 12.6 ms … 14.3 ms 205 runs
Benchmark 4: nix eval --raw --expr "let s = __concatStringsSep \"\" (__genList (_: \"c\") 256); in __toJSON (__genList (_: s) 4096)"
Time (mean ± σ): 24.0 ms ± 0.4 ms [User: 19.4 ms, System: 5.2 ms]
Range (min … max): 22.7 ms … 25.8 ms 119 runs
Benchmark 5: nix eval --raw --expr "let s = __concatStringsSep \"\" (__genList (_: \"c\") 256); in __toJSON (__genList (_: s) 65536)"
Time (mean ± σ): 196.0 ms ± 3.7 ms [User: 171.2 ms, System: 25.8 ms]
Range (min … max): 190.6 ms … 201.5 ms 14 runs
after:
Benchmark 1: nix eval --raw --expr "let s = __concatStringsSep \"\" (__genList (_: \"c\") 256); in __toJSON (__genList (_: s) 1)"
Time (mean ± σ): 12.4 ms ± 0.3 ms [User: 9.1 ms, System: 4.0 ms]
Range (min … max): 11.7 ms … 13.3 ms 204 runs
Benchmark 2: nix eval --raw --expr "let s = __concatStringsSep \"\" (__genList (_: \"c\") 256); in __toJSON (__genList (_: s) 4)"
Time (mean ± σ): 12.4 ms ± 0.2 ms [User: 9.2 ms, System: 3.9 ms]
Range (min … max): 11.8 ms … 13.0 ms 214 runs
Benchmark 3: nix eval --raw --expr "let s = __concatStringsSep \"\" (__genList (_: \"c\") 256); in __toJSON (__genList (_: s) 256)"
Time (mean ± σ): 12.6 ms ± 0.2 ms [User: 9.5 ms, System: 3.8 ms]
Range (min … max): 12.1 ms … 13.3 ms 209 runs
Benchmark 4: nix eval --raw --expr "let s = __concatStringsSep \"\" (__genList (_: \"c\") 256); in __toJSON (__genList (_: s) 4096)"
Time (mean ± σ): 15.9 ms ± 0.2 ms [User: 11.4 ms, System: 5.1 ms]
Range (min … max): 15.2 ms … 16.4 ms 171 runs
Benchmark 5: nix eval --raw --expr "let s = __concatStringsSep \"\" (__genList (_: \"c\") 256); in __toJSON (__genList (_: s) 65536)"
Time (mean ± σ): 69.0 ms ± 0.9 ms [User: 44.3 ms, System: 25.3 ms]
Range (min … max): 67.2 ms … 70.9 ms 42 runs
Previously you had to remember to call value->attrs->sort() after
populating value->attrs. Now there is a BindingsBuilder helper that
wraps Bindings and ensures that sort() is called before you can use
it.
nixpkgs can save a good bit of eval memory with this primop. zipAttrsWith is
used quite a bit around nixpkgs (eg in the form of recursiveUpdate), but the
most costly application for this primop is in the module system. it improves
the implementation of zipAttrsWith from nixpkgs by not checking an attribute
multiple times if it occurs more than once in the input list, allocates less
values and set elements, and just avoids many a temporary object in general.
nixpkgs has a more generic version of this operation, zipAttrsWithNames, but
this version is only used once so isn't suitable for being the base of a new
primop. if it were to be used more we should add a second primop instead.
When we check for disappeared overrides, we can get "false positives"
for follows and overrides which are defined in the dependencies of the
flake we are locking, since they are not parsed by
parseFlakeInputs. However, at that point we already know that the
overrides couldn't have possible been changed if the input itself
hasn't changed (since we check that oldLock->originalRef == *input.ref
for the input's parent). So, to prevent this, only perform this check
when it was possible that the flake changed (e.g. the flake we're
locking, or a new input, or the input has changed and mustRefetch ==
true).
This makes sure that values parsed from TOML have a proper size. Using
e.g. `double` caused issues on i686 where the size of `double` (32bit)
was too small to accommodate some values.
This was already accidentally disabled in ba87b08. It also no longer
appears to be beneficial, and in fact slow things down, e.g. when
evaluating a NixOS system configuration:
elapsed time: median = 3.8170 mean = 3.8202 stddev = 0.0195 min = 3.7894 max = 3.8600 [rejected, p=0.00000, Δ=0.36929±0.02513]
calling GC_malloc for each value is significantly more expensive than
allocating a bunch of values at once with GC_malloc_many. "a bunch" here
is a GC block size, ie 16KiB or less.
this gives a 1.5% performance boost when evaluating our nixos system.
tested with
nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
# on master
Time (mean ± σ): 3.335 s ± 0.007 s [User: 2.774 s, System: 0.293 s]
Range (min … max): 3.315 s … 3.347 s 50 runs
# with this change
Time (mean ± σ): 3.288 s ± 0.006 s [User: 2.728 s, System: 0.292 s]
Range (min … max): 3.274 s … 3.307 s 50 runs
