this also reduces forceValue code size and removes the need for
hideInDiagnostics. coopting thunk forcing like this has the additional
benefit of clarifying how these errors can happen in the first place.
almost all uses of this are interactive, except for deepSeq. deepSeq is
going to be expensive and rare enough to not care much about, and
Value::determinePos should usually be cheap enough to not be too much of
a burden in any case.
checking for isBlackhole in the forceValue hot path is rather more
expensive than necessary, and with a little bit of trickery we can move
such handling into the isApp case. small performance benefit, but under
some circumstances we've seen 2% improvement as well.
〉 nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
before:
Time (mean ± σ): 4.429 s ± 0.002 s [User: 3.929 s, System: 0.500 s]
Range (min … max): 4.427 s … 4.433 s 10 runs
after:
Time (mean ± σ): 4.396 s ± 0.002 s [User: 3.894 s, System: 0.501 s]
Range (min … max): 4.393 s … 4.399 s 10 runs
According https://en.cppreference.com/w/cpp/io/strstream, it has been
deprecated since C++98! The Clang + Linux build systems to not have it
at all, or at least be hiding it.
We can just use `std::stringstream` instead, I think.
* Print the value in `error: cannot coerce` messages
This extends the `error: cannot coerce a TYPE to a string` message
to print the value that could not be coerced. This helps with debugging
by making it easier to track down where the value is being produced
from, especially in errors with deep or unhelpful stack traces.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This includes position information in more places, making debugging
easier.
Before:
```
$ nix-instantiate --show-trace --eval tests/functional/lang/eval-fail-using-set-as-attr-name.nix
error:
… while evaluating an attribute name
at «none»:0: (source not available)
error: value is a set while a string was expected
```
After:
```
error:
… while evaluating an attribute name
at /pwd/lang/eval-fail-using-set-as-attr-name.nix:5:10:
4| in
5| attr.${key}
| ^
6|
error: value is a set while a string was expected
```
Try to stay away from stack overflows.
These small vectors use stack space. Most instances will not need
to allocate because in general most things are small, and large
things are worth heap allocating.
16 * 3 * word = 384 bytes is still quite a bit, but these functions
tend not to be part of deep recursions.
All OS and IO operations should be moved out, leaving only some misc
portable pure functions.
This is useful to avoid copious CPP when doing things like Windows and
Emscripten ports.
Newly exposed functions to break cycles:
- `restoreSignals`
- `updateWindowSize`
MemoryInputAccessor is an in-memory virtual filesystem that returns
files like <nix/fetchurl.nix>. This removes the need for special hacks
to handle those files.
This function is now trivial enough that it doesn't need to exist.
`EvalState` can still be initialized with a custom search path, but we
don't have a need to mutate the search path after it has been
constructed, and I don't see why we would need to in the future.
Fixes#8229
Types converted:
- `NixStringContextElem`
- `OutputsSpec`
- `ExtendedOutputsSpec`
- `DerivationOutput`
- `DerivationType`
Existing ones mostly conforming the pattern cleaned up:
- `ContentAddressMethod`
- `ContentAddressWithReferences`
The `DerivationGoal::derivationType` field had a bogus initialization,
now caught, so I made it `std::optional`. I think #8829 can make it
non-optional again because it will ensure we always have the derivation
when we construct a `DerivationGoal`.
See that issue (#7479) for details on the general goal.
`git grep 'Raw::Raw'` indicates the two types I didn't yet convert
`DerivedPath` and `BuiltPath` (and their `Single` variants) . This is
because @roberth and I (can't find issue right now...) plan on reworking
them somewhat, so I didn't want to churn them more just yet.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
`EvalState::mkSingleDerivedPathString` previously contained its own
inverse (printing, rather than parsing) in order to validate what was
parsed. Now that is pulled out into its own separate function:
`EvalState::coerceToSingleDerivedPath`.
In additional that pulled out logic is deduplicated with
`EvalState::mkOutputString` via `EvalState::mkOutputStringRaw`, which is
itself deduplicated (and generalized) with
`DownstreamPlaceholder::mkOutputStringRaw`.
All these changes make the unit tests simpler.
(We would ideally write more unit tests for `mkSingleDerivedPathString`
`coerceToSingleDerivedPath` directly, but we cannot yet do that because
the IO in reading the store path won't work when the dummy store cannot
hold anything. Someday we'll have a proper in-memory store which will
work for this.)
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
We want to be able to write down `foo.drv^bar.drv^baz`:
`foo.drv^bar.drv` is the dynamic derivation (since it is itself a
derivation output, `bar.drv` from `foo.drv`).
To that end, we create `Single{Derivation,BuiltPath}` types, that are
very similar except instead of having multiple outputs (in a set or
map), they have a single one. This is for everything to the left of the
rightmost `^`.
`NixStringContextElem` has an analogous change, and now can reuse
`SingleDerivedPath` at the top level. In fact, if we ever get rid of
`DrvDeep`, `NixStringContextElem` could be replaced with
`SingleDerivedPath` entirely!
Important note: some JSON formats have changed.
We already can *produce* dynamic derivations, but we can't refer to them
directly. Today, we can merely express building or example at the top
imperatively over time by building `foo.drv^bar.drv`, and then with a
second nix invocation doing `<result-from-first>^baz`, but this is not
declarative. The ethos of Nix of being able to write down the full plan
everything you want to do, and then execute than plan with a single
command, and for that we need the new inductive form of these types.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
- Better types
- Own header / C++ file pair
- Test factored out methods
- Pass parsed thing around more than strings
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
This is done in roughly the same way builtin functions are documented.
Also auto-link experimental features for primops, subsuming PR #8371.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This fixes a bug in commands like `nix eval' which would emit invalid attribute
sets if they contained reserved keywords such as "assert", "let", etc.
These keywords will not be quoted when printed, making them valid expressions.
All keywords recognized by the lexer are quoted except "or", which does not
require quotation.
Motivation
`PathSet` is not correct because string contexts have other forms
(`Built` and `DrvDeep`) that are not rendered as plain store paths.
Instead of wrongly using `PathSet`, or "stringly typed" using
`StringSet`, use `std::std<StringContextElem>`.
-----
In support of this change, `NixStringContext` is now defined as
`std::std<StringContextElem>` not `std:vector<StringContextElem>`. The
old definition was just used by a `getContext` method which was only
used by the eval cache. It can be deleted altogether since the types are
now unified and the preexisting `copyContext` function already suffices.
Summarizing the previous paragraph:
Old:
- `value/context.hh`: `NixStringContext = std::vector<StringContextElem>`
- `value.hh`: `NixStringContext Value::getContext(...)`
- `value.hh`: `copyContext(...)`
New:
- `value/context.hh`: `NixStringContext = std::set<StringContextElem>`
- `value.hh`: `copyContext(...)`
----
The string representation of string context elements no longer contains
the store dir. The diff of `src/libexpr/tests/value/context.cc` should
make clear what the new representation is, so we recommend reviewing
that file first. This was done for two reasons:
Less API churn:
`Value::mkString` and friends did not take a `Store` before. But if
`NixStringContextElem::{parse, to_string}` *do* take a store (as they
did before), then we cannot have the `Value` functions use them (in
order to work with the fully-structured `NixStringContext`) without
adding that argument.
That would have been a lot of churn of threading the store, and this
diff is already large enough, so the easier and less invasive thing to
do was simply make the element `parse` and `to_string` functions not
take the `Store` reference, and the easiest way to do that was to simply
drop the store dir.
Space usage:
Dropping the `/nix/store/` (or similar) from the internal representation
will safe space in the heap of the Nix programming being interpreted. If
the heap contains many strings with non-trivial contexts, the saving
could add up to something significant.
----
The eval cache version is bumped.
The eval cache serialization uses `NixStringContextElem::{parse,
to_string}`, and since those functions are changed per the above, that
means the on-disk representation is also changed.
This is simply done by changing the name of the used for the eval cache
from `eval-cache-v4` to eval-cache-v5`.
----
To avoid some duplication `EvalCache::mkPathString` is added to abstract
over the simple case of turning a store path to a string with just that
string in the context.
Context
This PR picks up where #7543 left off. That one introduced the fully
structured `NixStringContextElem` data type, but kept `PathSet context`
as an awkward middle ground between internal `char[][]` interpreter heap
string contexts and `NixStringContext` fully parsed string contexts.
The infelicity of `PathSet context` was specifically called out during
Nix team group review, but it was agreeing that fixing it could be left
as future work. This is that future work.
A possible follow-up step would be to get rid of the `char[][]`
evaluator heap representation, too, but it is not yet clear how to do
that. To use `NixStringContextElem` there we would need to get the STL
containers to GC pointers in the GC build, and I am not sure how to do
that.
----
PR #7543 effectively is writing the inverse of a `mkPathString`,
`mkOutputString`, and one more such function for the `DrvDeep` case. I
would like that PR to have property tests ensuring it is actually the
inverse as expected.
This PR sets things up nicely so that reworking that PR to be in that
more elegant and better tested way is possible.
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
This introduces the SourcePath type from lazy-trees as an abstraction
for accessing files from inputs that may not be materialized in the
real filesystem (e.g. Git repositories). Currently, however, it's just
a wrapper around CanonPath, so it shouldn't change any behaviour. (On
lazy-trees, SourcePath is a <InputAccessor, CanonPath> tuple.)
XDG Base Directory is a standard for locations for storing various
files. Nix has a few files which seem to fit in the standard, but
currently use a custom location directly in the user's ~, polluting
it:
- ~/.nix-profile
- ~/.nix-defexpr
- ~/.nix-channels
This commit adds a config option (use-xdg-base-directories) to follow
the XDG spec and instead use the following locations:
- $XDG_STATE_HOME/nix/profile
- $XDG_STATE_HOME/nix/defexpr
- $XDG_STATE_HOME/nix/channels
If $XDG_STATE_HOME is not set, it is assumed to be ~/.local/state.
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
Co-authored-by: Tim Fenney <kodekata@gmail.com>
Co-authored-by: pasqui23 <pasqui23@users.noreply.github.com>
Co-authored-by: Artturin <Artturin@artturin.com>
Co-authored-by: John Ericson <Ericson2314@Yahoo.com>
Previously, getDefaultNixPath was called too early: at initialisation
time, before CLI and config have been processed, when `restrictEval` and
`pureEval` both have their default value `false`. Call it when
initialising the EvalState instead, and use `setDefault`.
Prior to this change, we had a bunch of ad-hoc string manipulation code
scattered around. This made it hard to figure out what data model for
string contexts is.
Now, we still store string contexts most of the time as encoded strings
--- I was wary of the performance implications of changing that --- but
whenever we parse them we do so only through the
`NixStringContextElem::parse` method, which handles all cases. This
creates a data type that is very similar to `DerivedPath` but:
- Represents the funky `=<drvpath>` case as properly distinct from the
others.
- Only encodes a single output, no wildcards and no set, for the
"built" case.
(I would like to deprecate `=<path>`, after which we are in spitting
distance of `DerivedPath` and could maybe get away with fewer types, but
that is another topic for another day.)
This makes the position object used in exceptions abstract, with a
method getSource() to get the source code of the file in which the
error originated. This is needed for lazy trees because source files
don't necessarily exist in the filesystem, and we don't want to make
libutil depend on the InputAccessor type in libfetcher.
Make everything be in the form "while ..." (most things were already),
and in particular *don't* use other propositions that must go after or
before specific "while ..." clauses to make sense.
The old way was not correct.
Here is an example:
```
$ nix-instantiate --eval --expr 'let x = a: throw "asdf"; in x 1' --show-trace
error: asdf
… while evaluating 'x'
at «string»:1:9:
1| let x = a: throw "asdf"; in x 1
| ^
… from call site
at «string»:1:29:
1| let x = a: throw "asdf"; in x 1
| ^
```
and yet also:
```
$ nix-instantiate --eval --expr 'let x = a: throw "asdf"; in x' --show-trace
<LAMBDA>
```
Here is the thing: in both cases we are evaluating `x`!
Nix is a higher-order languages, and functions are a sort of value. When
we write `x = a: ...`, `a: ...` is the expression that `x` is being
defined to be, and that is already a value. Therefore, we should *never*
get an trace that says "while evaluating `x`", because evaluating `a:
...` is *trival* and nothing happens during it!
What is actually happening here is we are applying `x` and evaluating
its *body* with arguments substituted for parameters. I think the
simplest way to say is just "while *calling* `x`", and so that is what I
changed it to.
It calls strlen() on the input (rather than simply copying at most
`size` bytes), which can fail if the input is not zero-terminated and
is inefficient in any case.
Fixes#7347.
* libexpr: fix builtins.split example
The example was previously indicating that multiple whitespaces would be
collapsed into a single captured whitespace. That isn't true and was
likely a mistake when being documented initially.
* Fix segfault on unitilized list when printing value
Since lists are just chunks of memory the individual elements in the
list might be unitilized when a programming error happens within Nix.
In this case the values are null-initialized (at least with Boehm GC)
and we can avoid a nullptr deref when printing them.
I ran into this issue while ensuring that new expression tests would
show the actual value on an assertion failure.
This is unlikely to cause any runtime performance regressions as
printing values is not really in the hot path (unless the repl is the
primary use case).
* Add operator<< for ValueTypes
* Add libexpr tests
This introduces tests for libexpr that evalulate various trivial Nix
language expressions and primop invocations that should be good smoke
tests wheter or not the implementation is behaving as expected.
