When computing a lock file, we now respect the lock files of flake
inputs. This is important for usability / reproducibility. For
example, the 'nixops' flake depends on the 'nixops-aws' and
'nixops-hetzner' repositories. So when the 'nixops' flake is used in
another flake, we want the versions of 'nixops-aws' and
'nixops-hetzner' locked by the the 'nixops' flake because those
presumably have been tested.
This can lead to a proliferation of versions of flakes like 'nixpkgs'
(since every flake's lock file could depend on a different version of
'nixpkgs'). This is not a major issue when using Nixpkgs overlays or
NixOS modules, since then the top-level flake composes those
overlays/modules into *its* version of Nixpkgs and all other versions
are ignored. Lock file computation has been made a bit more lazy so it
won't try to fetch all those versions of 'nixpkgs'.
However, in case it's necessary to minimize flake versions, there now
are two input attributes that allow this. First, you can copy an input
from another flake, as follows:
inputs.nixpkgs.follows = "dwarffs/nixpkgs";
This states that the calling flake's 'nixpkgs' input shall be the same
as the 'nixpkgs' input of the 'dwarffs' input.
Second, you can override inputs of inputs:
inputs.nixpkgs.url = github:edolstra/nixpkgs/<hash>;
inputs.nixops.inputs.nixpkgs.url = github:edolstra/nixpkgs/<hash>;
or equivalently, using 'follows':
inputs.nixpkgs.url = github:edolstra/nixpkgs/<hash>;
inputs.nixops.inputs.nixpkgs.follows = "nixpkgs";
This states that the 'nixpkgs' input of the 'nixops' input shall be
the same as the calling flake's 'nixpkgs' input.
Finally, at '-v' Nix now prints the changes to the lock file, e.g.
$ nix flake update ~/Misc/eelco-configurations/hagbard
inputs of flake 'git+file:///home/eelco/Misc/eelco-configurations?subdir=hagbard' changed:
updated 'nixpkgs': 'github:edolstra/nixpkgs/7845bf5f4b3013df1cf036e9c9c3a55a30331db9' -> 'github:edolstra/nixpkgs/03f3def66a104a221aac8b751eeb7075374848fd'
removed 'nixops'
removed 'nixops/nixops-aws'
removed 'nixops/nixops-hetzner'
removed 'nixops/nixpkgs'
Fixes
error: derivation '/nix/store/klivma7r7h5lndb99f7xxmlh5whyayvg-zlib-1.2.11.drv' has incorrect output '/nix/store/fv98nnx5ykgbq8sqabilkgkbc4169q05-zlib-1.2.11-dev', should be '/nix/store/adm7pilzlj3z5k249s8b4wv3scprhzi1-zlib-1.2.11-dev'
Having a colon in the path may cause issues, and having the hash
function indicated isn't actually necessary. We now verify the path
format in the tests to prevent regressions.
Before, we would get:
[deploy@bastion:~]$ nix-store -r /nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv
these derivations will be built:
/nix/store/3ka4ihvwh6wsyhpd2qa9f59506mnxvx1-initrd-linux-4.19.88.drv
/nix/store/ssxwmll7v21did1c8j027q0m8w6pg41i-unit-prometheus-alertmanager-irc-notifier.service.drv
/nix/store/mvyvkj46ay7pp7b1znqbkck2mq98k0qd-unit-script-network-local-commands-start.drv
/nix/store/vsl1y9mz38qfk6pyirjwnfzfggz5akg6-unit-network-local-commands.service.drv
/nix/store/wi5ighfwwb83fdmav6z6n2fw6npm9ffl-unit-prometheus-hydra-exporter.service.drv
/nix/store/x0qkv535n75pbl3xn6nn1w7qkrg9wwyg-unit-prometheus-packet-sd.service.drv
/nix/store/lv491znsjxdf51xnfxh9ld7r1zg14d52-unit-script-packet-sd-env-key-pre-start.drv
/nix/store/nw4nzlca49agsajvpibx7zg5b873gk9f-unit-script-packet-sd-env-key-start.drv
/nix/store/x674wwabdwjrkhnykair4c8mpxa9532w-unit-packet-sd-env-key.service.drv
/nix/store/ywivz64ilb1ywlv652pkixw3vxzfvgv8-unit-wireguard-wg0.service.drv
/nix/store/v3b648293g3zl8pnn0m1345nvmyd8dwb-unit-script-acme-selfsigned-status.nixos.org-start.drv
/nix/store/zci5d3zvr6fgdicz6k7jjka6lmx0v3g4-unit-acme-selfsigned-status.nixos.org.service.drv
/nix/store/f6pwvnm63d0kw5df0v7sipd1rkhqxk5g-system-units.drv
/nix/store/iax8071knxk9c7krpm9jqg0lcrawf4lc-etc.drv
/nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv
error: invalid file name 'closure-init-0' in 'exportReferencesGraph'
This was tough to debug, I didn't figure out which one was broken until I did:
nix-store -r /nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv 2>&1 | grep nix/store | xargs -n1 nix-store -r
and then looking at the remaining build graph:
$ nix-store -r /nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv
these derivations will be built:
/nix/store/3ka4ihvwh6wsyhpd2qa9f59506mnxvx1-initrd-linux-4.19.88.drv
/nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv
error: invalid file name 'closure-init-0' in 'exportReferencesGraph'
and knowing the initrd build is before the system, then:
$ nix show-derivation /nix/store/3ka4ihvwh6wsyhpd2qa9f59506mnxvx1-initrd-linux-4.19.88.drv
{
"/nix/store/3ka4ihvwh6wsyhpd2qa9f59506mnxvx1-initrd-linux-4.19.88.drv": {
[...]
"exportReferencesGraph": "closure-init-0 /nix/store/...-stage-1-init.sh closure-mdadm.conf-1 /nix/store/...-mdadm.conf closure-ubuntu.conf-2 ...",
[...]
}
}
I then searched the repo for "in 'exportReferencesGraph'", found this
recently updated regex, and realized it was missing a "-".
Before:
$ nix-channel --update
unpacking channels...
warning: SQLite database '/nix/var/nix/db/db.sqlite' is busy (SQLITE_PROTOCOL)
warning: SQLite database '/nix/var/nix/db/db.sqlite' is busy (SQLITE_PROTOCOL)
warning: SQLite database '/nix/var/nix/db/db.sqlite' is busy (SQLITE_PROTOCOL)
warning: SQLite database '/nix/var/nix/db/db.sqlite' is busy (SQLITE_PROTOCOL)
warning: SQLite database '/nix/var/nix/db/db.sqlite' is busy (SQLITE_PROTOCOL)
After:
$ inst/bin/nix-channel --update
unpacking channels...
created 1 symlinks in user environment
I've seen complaints that "sandbox" caused problems under WSL but I'm
having no problems. I think recent changes could have fixed the issue.
This allows overriding the priority of substituters, e.g.
$ nix-store --store ~/my-nix/ -r /nix/store/df3m4da96d84ljzxx4mygfshm1p0r2n3-geeqie-1.4 \
--substituters 'http://cache.nixos.org?priority=100 daemon?priority=10'
Fixes#3264.
If the `throw` is reached, this means that execvp into `ssh` wasn’t
successful. We can hint at a usual problem, which is a missing `ssh`
executable.
Test with:
```
env PATH= ./result/bin/nix-copy-closure --builders '' unusedhost
```
and the bash version with
```
env PATH= ./result/bin/nix-copy-closure --builders '' localhost
```
Most functions now take a StorePath argument rather than a Path (which
is just an alias for std::string). The StorePath constructor ensures
that the path is syntactically correct (i.e. it looks like
<store-dir>/<base32-hash>-<name>). Similarly, functions like
buildPaths() now take a StorePathWithOutputs, rather than abusing Path
by adding a '!<outputs>' suffix.
Note that the StorePath type is implemented in Rust. This involves
some hackery to allow Rust values to be used directly in C++, via a
helper type whose destructor calls the Rust type's drop()
function. The main issue is the dynamic nature of C++ move semantics:
after we have moved a Rust value, we should not call the drop function
on the original value. So when we move a value, we set the original
value to bitwise zero, and the destructor only calls drop() if the
value is not bitwise zero. This should be sufficient for most types.
Also lots of minor cleanups to the C++ API to make it more modern
(e.g. using std::optional and std::string_view in some places).
Also, fetchGit now runs in O(1) memory since we pipe the output of
'git archive' directly into unpackTarball() (rather than first reading
it all into memory).
We can now convert Rust Errors to C++ exceptions. At the Rust->C++ FFI
boundary, Result<T, Error> will cause Error to be converted to and
thrown as a C++ exception.
E.g.
$ nix-build '<nixpkgs>' -A hello --experimental-features no-url-literals
error: URL literals are disabled, at /nix/store/vsjamkzh15r3c779q2711az826hqgvzr-nixpkgs-20.03pre194957.bef773ed53f/nixpkgs/pkgs/top-level/all-packages.nix:1236:11
Helps with implementing https://github.com/NixOS/rfcs/pull/45.
A corrupt entry in .links prevents adding a fixed version of that file
to the store in any path. The user experience is that corruption
present in the store 'spreads' to new paths added to the store:
(With store optimisation enabled)
1. A file in the store gets corrupted somehow (eg: filesystem bug).
2. The user tries to add a thing to the store which contains a good copy
of the corrupted file.
3. The file being added to the store is hashed, found to match the bad
.links entry, and is replaced by a link to the bad .links entry.
(The .links entry's hash is not verified during add -- this would
impose a substantial performance burden.)
4. The user observes that the thing in the store that is supposed to be
a copy of what they were trying to add is not a correct copy -- some
files have different contents! Running "nix-store --verify
--check-contents --repair" does not fix the problem.
This change makes "nix-store --verify --check-contents --repair" fix
this problem. Bad .links entries are simply removed, allowing future
attempts to insert a good copy of the file to succeed.
Derivations that want to use recursion should now set
requiredSystemFeatures = [ "recursive-nix" ];
to make the daemon socket appear.
Also, Nix should be configured with "experimental-features =
recursive-nix".
This allows Nix builders to call Nix to build derivations, with some
limitations.
Example:
let nixpkgs = fetchTarball channel:nixos-18.03; in
with import <nixpkgs> {};
runCommand "foo"
{
buildInputs = [ nix jq ];
NIX_PATH = "nixpkgs=${nixpkgs}";
}
''
hello=$(nix-build -E '(import <nixpkgs> {}).hello.overrideDerivation (args: { name = "hello-3.5"; })')
$hello/bin/hello
mkdir -p $out/bin
ln -s $hello/bin/hello $out/bin/hello
nix path-info -r --json $hello | jq .
''
This derivation makes a recursive Nix call to build GNU Hello and
symlinks it from its $out, i.e.
# ll ./result/bin/
lrwxrwxrwx 1 root root 63 Jan 1 1970 hello -> /nix/store/s0awxrs71gickhaqdwxl506hzccb30y5-hello-3.5/bin/hello
# nix-store -qR ./result
/nix/store/hwwqshlmazzjzj7yhrkyjydxamvvkfd3-glibc-2.26-131
/nix/store/s0awxrs71gickhaqdwxl506hzccb30y5-hello-3.5
/nix/store/sgmvvyw8vhfqdqb619bxkcpfn9lvd8ss-foo
This is implemented as follows:
* Before running the outer builder, Nix creates a Unix domain socket
'.nix-socket' in the builder's temporary directory and sets
$NIX_REMOTE to point to it. It starts a thread to process
connections to this socket. (Thus you don't need to have nix-daemon
running.)
* The daemon thread uses a wrapper store (RestrictedStore) to keep
track of paths added through recursive Nix calls, to implement some
restrictions (see below), and to do some censorship (e.g. for
purity, queryPathInfo() won't return impure information such as
signatures and timestamps).
* After the build finishes, the output paths are scanned for
references to the paths added through recursive Nix calls (in
addition to the inputs closure). Thus, in the example above, $out
has a reference to $hello.
The main restriction on recursive Nix calls is that they cannot do
arbitrary substitutions. For example, doing
nix-store -r /nix/store/kmwd1hq55akdb9sc7l3finr175dajlby-hello-2.10
is forbidden unless /nix/store/kmwd... is in the inputs closure or
previously built by a recursive Nix call. This is to prevent
irreproducible derivations that have hidden dependencies on
substituters or the current store contents. Building a derivation is
fine, however, and Nix will use substitutes if available. In other
words, the builder has to present proof that it knows how to build a
desired store path from scratch by constructing a derivation graph for
that path.
Probably we should also disallow instantiating/building fixed-output
derivations (specifically, those that access the network, but
currently we have no way to mark fixed-output derivations that don't
access the network). Otherwise sandboxed derivations can bypass
sandbox restrictions and access the network.
When sandboxing is enabled, we make paths appear in the sandbox of the
builder by entering the mount namespace of the builder and
bind-mounting each path. This is tricky because we do a pivot_root()
in the builder to change the root directory of its mount namespace,
and thus the host /nix/store is not visible in the mount namespace of
the builder. To get around this, just before doing pivot_root(), we
branch a second mount namespace that shares its /nix/store mountpoint
with the parent.
Recursive Nix currently doesn't work on macOS in sandboxed mode
(because we can't change the sandbox policy of a running build) and in
non-root mode (because setns() barfs).
Add missing docstring on InstallableCommand. Also, some of these were wrapped
when they're right next to a line longer than the unwrapped line, so we can just
unwrap them to save vertical space.
Fixes the following warning and the indicate potential issue:
src/libstore/worker-protocol.hh:66:1: warning: class 'Source' was previously declared as a struct; this is valid, but may result in linker errors
under the Microsoft C++ ABI [-Wmismatched-tags]
(cherry picked from commit 6e1bb04870b1b723282d32182af286646f13bf3c)
This adds a command 'nix make-content-addressable' that rewrites the
specified store paths into content-addressable paths. The advantage of
such paths is that 1) they can be imported without signatures; 2) they
can enable deduplication in cases where derivation changes do not
cause output changes (apart from store path hashes).
For example,
$ nix make-content-addressable -r nixpkgs.cowsay
rewrote '/nix/store/g1g31ah55xdia1jdqabv1imf6mcw0nb1-glibc-2.25-49' to '/nix/store/48jfj7bg78a8n4f2nhg269rgw1936vj4-glibc-2.25-49'
...
rewrote '/nix/store/qbi6rzpk0bxjw8lw6azn2mc7ynnn455q-cowsay-3.03+dfsg1-16' to '/nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16'
We can then copy the resulting closure to another store without
signatures:
$ nix copy --trusted-public-keys '' ---to ~/my-nix /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16
In order to support self-references in content-addressable paths,
these paths are hashed "modulo" self-references, meaning that
self-references are zeroed out during hashing. Somewhat annoyingly,
this means that the NAR hash stored in the Nix database is no longer
necessarily equal to the output of "nix hash-path"; for
content-addressable paths, you need to pass the --modulo flag:
$ nix path-info --json /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16 | jq -r .[].narHash
sha256:0ri611gdilz2c9rsibqhsipbfs9vwcqvs811a52i2bnkhv7w9mgw
$ nix hash-path --type sha256 --base32 /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16
1ggznh07khq0hz6id09pqws3a8q9pn03ya3c03nwck1kwq8rclzs
$ nix hash-path --type sha256 --base32 /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16 --modulo iq6g2x4q62xp7y7493bibx0qn5w7xz67
0ri611gdilz2c9rsibqhsipbfs9vwcqvs811a52i2bnkhv7w9mgw
Experimental features are now opt-in. There is currently one
experimental feature: "nix-command" (which enables the "nix"
command. This will allow us to merge experimental features more
quickly, without committing to supporting them indefinitely.
Typical usage:
$ nix build --experimental-features 'nix-command flakes' nixpkgs#hello
(cherry picked from commit 8e478c2341,
without the "flakes" feature)
Experimental features are now opt-in. There are currently two
experimental features: "nix-command" (which enables the "nix"
command), and "flakes" (which enables support for flakes). This will
allow us to merge experimental features more quickly, without
committing to supporting them indefinitely.
Typical usage:
$ nix build --experimental-features 'nix-command flakes' nixpkgs#hello
The tmpDirInSandbox is different when in sandboxed vs. non-sandboxed.
Since we don’t know ahead of time here whether sandboxing is enabled,
we need to reset all of the env vars we’ve set previously. This fixes
the issue encountered in https://github.com/NixOS/nixpkgs/issues/70856.
Previously, SANDBOX_SHELL was set to empty when unavailable. This
caused issues when actually generating the sandbox. Instead, just set
SANDBOX_SHELL when --with-sandbox-shell= is non-empty. Alternative
implementation to https://github.com/NixOS/nix/pull/3038.
This integrates the functionality of the index-debuginfo program in
nixos-channel-scripts to maintain an index of DWARF debuginfo files in
a format usable by dwarffs. Thus the debug info index is updated by
Hydra rather than by the channel mirroring script.
Example usage:
$ nix copy --to 'file:///tmp/binary-cache?index-debug-info=true' /nix/store/vr9mhcch3fljzzkjld3kvkggvpq38cva-nix-2.2.2-debug
$ cat /tmp/binary-cache/debuginfo/036b210b03bad75ab2d8fc80b7a146f98e7f1ecf.debug
{"archive":"../nar/0313h2kdhk4v73xna9ysiksp2v8xrsk5xsw79mmwr3rg7byb4ka8.nar.xz","member":"lib/debug/.build-id/03/6b210b03bad75ab2d8fc80b7a146f98e7f1ecf.debug"}
Fixes#3083.
Previously we allowed any length of name for Nix derivations. This is
bad because different file systems have different max lengths. To make
things predictable, I have picked a max. This was done by trying to
build this derivation:
derivation {
name = "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa";
builder = "/no-such-path";
system = "x86_64-linux";
}
Take off one a and it will not lead to file name too long. That ends
up being 212 a’s. An even smaller max could be picked if we want to
support more file systems.
Working backwards, this is why:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa-${name}.drv.chroot
> 255 - 32 - 1 - 4 - 7 = 211
These are already handled separately. This fixes warnings like
warning: ignoring the user-specified setting 'max-jobs', because it is a restricted setting and you are not a trusted user
when using the -j flag.
Make curl's low speed limit configurable via stalled-download-timeout.
Before, this limit was five minutes without receiving a single byte.
This is much too long as if the remote end may not have even
acknowledged the HTTP request.
POSIX file locks are essentially incompatible with multithreading. BSD
locks have much saner semantics. We need this now that there can be
multiple concurrent LocalStore::buildPaths() invocations.
This currently fails because we're using POSIX file locks. So when the
garbage collector opens and closes its own temproots file, it causes
the lock to be released and then deleted by another GC instance.
Passing `--post-build-hook /foo/bar` to a nix-* command will cause
`/foo/bar` to be executed after each build with the following
environment variables set:
DRV_PATH=/nix/store/drv-that-has-been-built.drv
OUT_PATHS=/nix/store/...build /nix/store/...build-bin /nix/store/...build-dev
This can be useful in particular to upload all the builded artifacts to
the cache (including the ones that don't appear in the runtime closure
of the final derivation or are built because of IFD).
This new feature prints the stderr/stdout output to the `nix-build`
and `nix build` client, and the output is printed in a Nix 2
compatible format:
[nix]$ ./inst/bin/nix-build ./test.nix
these derivations will be built:
/nix/store/ishzj9ni17xq4hgrjvlyjkfvm00b0ch9-my-example-derivation.drv
building '/nix/store/ishzj9ni17xq4hgrjvlyjkfvm00b0ch9-my-example-derivation.drv'...
hello!
bye!
running post-build-hook '/home/grahamc/projects/github.com/NixOS/nix/post-hook.sh'...
post-build-hook: + sleep 1
post-build-hook: + echo 'Signing paths' /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: Signing paths /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: + sleep 1
post-build-hook: + echo 'Uploading paths' /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: Uploading paths /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: + sleep 1
post-build-hook: + printf 'very important stuff'
/nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
[nix-shell:~/projects/github.com/NixOS/nix]$ ./inst/bin/nix build -L -f ./test.nix
my-example-derivation> hello!
my-example-derivation> bye!
my-example-derivation (post)> + sleep 1
my-example-derivation (post)> + echo 'Signing paths' /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> Signing paths /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> + sleep 1
my-example-derivation (post)> + echo 'Uploading paths' /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> Uploading paths /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> + sleep 1
my-example-derivation (post)> + printf 'very important stuff'
[1 built, 0.0 MiB DL]
Co-authored-by: Graham Christensen <graham@grahamc.com>
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
startProcess does not appear to send the exit code to the helper
correctly. Not sure why this is, but it is probably safe to just
fallback on all sandbox errors.
When sandbox-fallback = true (the default), the Nix builder will fall
back to disabled sandbox mode when the kernel doesn’t allow users to
set it up. This prevents hard errors from occuring in tricky places,
especially the initial installer. To restore the previous behavior,
users can set:
sandbox-fallback = false
in their /etc/nix/nix.conf configuration.
Some kernels disable "unpriveleged user namespaces". This is
unfortunate, but we can still use mount namespaces. Anyway, since each
builder has its own nixbld user, we already have most of the benefits
of user namespaces.
This is a much simpler fix to the 'error 9 while decompressing xz
file' problem than 78fa47a7f0. We just
do a ranged HTTP request starting after the data that we previously
wrote into the sink.
Fixes#2952, #379.
$ sudo ./inst/bin/nix-instantiate -E '"${./.git}"'
error: The path name '.git' is invalid: it is illegal to start the
name with a period. Path names are alphanumeric and can include the
symbols +-._?= and must not begin with a period. Note: If '.git' is a
source file and you cannot rename it on disk,
builtins.path { name = ... } can be used to give it an alternative
name.
If multiple builds with fail with different errors it will be reflected
in the status code.
eg.
103 => timeout + hash mismatch
105 => timeout + check mismatch
106 => hash mismatch + check mismatch
107 => timeout + hash mismatch + check mismatch
Setting `http2 = false` in nix config (e.g. /etc/nix/nix.conf)
had no effect, and `nix-env -vvvvv -i hello` still downloaded .nar
packages using HTTP/2.
In `src/libstore/download.cc`, the `CURL_HTTP_VERSION_2TLS` option was
being explicitly set when `downloadSettings.enableHttp2` was `true`,
but, `CURL_HTTP_VERSION_1_1` option was not being explicitly set when
`downloadSettings.enableHttp2` was `false`.
This may be because `https://curl.haxx.se/libcurl/c/libcurl-env.html` states:
"You have to set this option if you want to use libcurl's HTTP/2 support."
but, also, in the changelog, states:
"DEFAULT
Since curl 7.62.0: CURL_HTTP_VERSION_2TLS
Before that: CURL_HTTP_VERSION_1_1"
So, the default setting for `libcurl` is HTTP/2 for version >= 7.62.0.
In this commit, option `CURLOPT_HTTP_VERSION` is explicitly set to
`CURL_HTTP_VERSION_1_1` when `downloadSettings.enableHttp2` nix config
setting is `false`.
This can be tested by running `nix-env -vvvvv -i hello | grep HTTP`
The default nsswitch.conf(5) file in most distros can handle many
different things including host name, user names, groups, etc. In Nix,
we want to limit the amount of impurities that come from these things.
As a result, we should only allow nss to be used for gethostbyname(3)
and getservent(3).
/cc @Ericson2314
--no-net causes tarballTtl to be set to the largest 32-bit integer,
which causes comparison like 'time + tarballTtl < other_time' to
fail on 32-bit systems. So cast them to 64-bit first.
https://hydra.nixos.org/build/95076624
(cherry picked from commit 29ccb2e969)
This flag
* Disables substituters.
* Sets the tarball-ttl to infinity (ensuring e.g. that the flake
registry and any downloaded flakes are considered current).
* Disables retrying downloads and sets the connection timeout to the
minimum. (So it doesn't completely disable downloads at the moment.)
(cherry picked from commit 8ea842260b)
Once we've started writing data to a Sink, we can't restart a download
request, because then we end up writing duplicate data to the
Sink. Therefore we shouldn't handle retries in Downloader but at a
higher level (in particular, in copyStorePath()).
Fixes#2952.
(cherry picked from commit a67cf5a358)
Also, make fetchGit and fetchMercurial update allowedPaths properly.
(Maybe the evaluator, rather than the caller of the evaluator, should
apply toRealPath(), but that's a bigger change.)
(cherry picked from commit 5c34d66538)
Once we've started writing data to a Sink, we can't restart a download
request, because then we end up writing duplicate data to the
Sink. Therefore we shouldn't handle retries in Downloader but at a
higher level (in particular, in copyStorePath()).
Fixes#2952.
--no-net causes tarballTtl to be set to the largest 32-bit integer,
which causes comparison like 'time + tarballTtl < other_time' to
fail on 32-bit systems. So cast them to 64-bit first.
https://hydra.nixos.org/build/95076624
This flag
* Disables substituters.
* Sets the tarball-ttl to infinity (ensuring e.g. that the flake
registry and any downloaded flakes are considered current).
* Disables retrying downloads and sets the connection timeout to the
minimum. (So it doesn't completely disable downloads at the moment.)
This allows many programs (e.g. gcc, clang, cmake) to print colorized
log output (assuming $TERM is set to a value like "xterm").
There are other ways to get colors, in particular setting
CLICOLOR_FORCE, but they're less widely supported and can break
programs that parse tool output.
This exploits the hermetic nature of flake evaluation to speed up
repeated evaluations of a flake output attribute.
For example (doing 'nix build' on an already present package):
$ time nix build nixpkgs:firefox
real 0m1.497s
user 0m1.160s
sys 0m0.139s
$ time nix build nixpkgs:firefox
real 0m0.052s
user 0m0.038s
sys 0m0.007s
The cache is ~/.cache/nix/eval-cache-v1.sqlite, which has entries like
INSERT INTO Attributes VALUES(
X'92a907d4efe933af2a46959b082cdff176aa5bfeb47a98fabd234809a67ab195',
'packages.firefox',
1,
'/nix/store/pbalzf8x19hckr8cwdv62rd6g0lqgc38-firefox-67.0.drv /nix/store/g6q0gx0v6xvdnizp8lrcw7c4gdkzana0-firefox-67.0 out');
where the hash 92a9... is a fingerprint over the flake store path and
the contents of the lockfile. Because flakes are evaluated in pure
mode, this uniquely identifies the evaluation result.
It was getting confused between logical and real store paths.
Also, make fetchGit and fetchMercurial update allowedPaths properly.
(Maybe the evaluator, rather than the caller of the evaluator, should
apply toRealPath(), but that's a bigger change.)
The value of useChroot is not set yet in the constructor, resulting in
hash rewriting being enabled in certain cases where it should not be.
Fixes#2801
To determine which seccomp filters to install, we were incorrectly
using settings.thisSystem, which doesn't denote the actual system when
--system is used.
Fixes#2791.
Scanning of /proc/<pid>/{exe,cwd} was broken because '{memory:' was
prepended twice. Also, get rid of the whole '{memory:...}' thing
because it's unnecessary, we can just list the file in /proc directly.
This new structure makes more sense as there may be many sources rooting
the same store path. Many profiles can reference the same path but this
is even more true with /proc/<pid>/maps where distinct pids can and
often do map the same store path.
This implementation is also more efficient as the `Roots` map contains
only one entry per rooted store path.
This reverts commit a0ef21262f. This
doesn't work in 'nix run' and nix-shell because setns() fails in
multithreaded programs, and Boehm GC mark threads are uncancellable.
Fixes#2646.
Use the same output ordering and format everywhere.
This is such a common issue that we trade the single-line error message for
more readability.
Old message:
```
fixed-output derivation produced path '/nix/store/d4nw9x2sy9q3r32f3g5l5h1k833c01vq-example.com' with sha256 hash '08y4734bm2zahw75b16bcmcg587vvyvh0n11gwiyir70divwp1rm' instead of the expected hash '1xzwnipjd54wl8g93vpw6hxnpmdabq0wqywriiwmh7x8k0lvpq5m'
```
New message:
```
hash mismatch in fixed-output derivation '/nix/store/d4nw9x2sy9q3r32f3g5l5h1k833c01vq-example.com':
wanted: sha256:1xzwnipjd54wl8g93vpw6hxnpmdabq0wqywriiwmh7x8k0lvpq5m
got: sha256:08y4734bm2zahw75b16bcmcg587vvyvh0n11gwiyir70divwp1rm
```
Without this information the content addressable state and hashes are
lost after the first request, this causes signatures to be required for
everything even tho the path could be verified without signing.
This enables using for http for S3 request for debugging or
implementations that don't have https configured. This is not a problem
for binary caches since they should not contain sensitive information.
Both package signatures and AWS auth already protect against tampering.
Previously, config would only be read from XDG_CONFIG_HOME. This change
allows reading config from additional directories, which enables e.g.
per-project binary caches or chroot stores with the help of direnv.
The use of TransferManager has several issues, including that it
doesn't allow setting a Content-Encoding without a patch, and it
doesn't handle exceptions in worker threads (causing termination on
memory allocation failure).
Fixes#2493.
This commit partially reverts 48662d151b. When
copying from an older store (in my case a store running Nix 1.11.7), nix would
throw errors about there being no hash. This is fixed by recalculating the hash.
In structured-attributes derivations, you can now specify per-output
checks such as:
outputChecks."out" = {
# The closure of 'out' must not be larger than 256 MiB.
maxClosureSize = 256 * 1024 * 1024;
# It must not refer to C compiler or to the 'dev' output.
disallowedRequisites = [ stdenv.cc "dev" ];
};
outputChecks."dev" = {
# The 'dev' output must not be larger than 128 KiB.
maxSize = 128 * 1024;
};
Also fixed a bug in allowedRequisites that caused it to ignore
self-references.
Since its superclass RemoteStore::Connection contains 'to' and 'from'
fields that refer to the file descriptor maintained in the subclass,
it was possible for the flush() call in Connection::~Connection() to
write to a closed file descriptor (or worse, a file descriptor now
referencing another file). So make sure that the file descriptor
survives 'to' and 'from'.
This is primarily because Derivation::{can,will}BuildLocally() depends
on attributes like preferLocalBuild and requiredSystemFeatures, but it
can't handle them properly because it doesn't have access to the
structured attributes.
E.g. __noChroot and allowedReferences now work correctly. We also now
check that the attribute type is correct. For instance, instead of
allowedReferences = "out";
you have to write
allowedReferences = [ "out" ];
Fixes#2453.
This meant that making a typo in an s3:// URI would cause a bucket to
be created. Also it didn't handle eventual consistency very well. Now
it's up to the user to create the bucket.
* Don't wait forever for the client to remove data from the
buffer. This does mean that the buffer can grow without bounds
(e.g. when downloading is faster than writing to disk), but meh.
* Don't hold the state lock while calling the sink. The sink could
take any amount of time to process the data (in particular when it's
actually a coroutine), so we don't want to block the download
thread.
TransferManager allocates a lot of memory (50 MiB by default), and it
might leak but I'm not sure about that. In any case it was causing
OOMs in hydra-queue-runner. So allocate only one TransferManager per
S3BinaryCacheStore.
Hopefully fixes https://github.com/NixOS/hydra/issues/586.
This callback is executed on a different thread, so exceptions thrown
from the callback are not caught:
Aug 08 16:25:48 chef hydra-queue-runner[11967]: terminate called after throwing an instance of 'nix::Error'
Aug 08 16:25:48 chef hydra-queue-runner[11967]: what(): AWS error: failed to upload 's3://nix-cache/19dbddlfb0vp68g68y19p9fswrgl0bg7.ls'
Therefore, just check the transfer status after it completes. Also
include the S3 error message in the exception.
This didn't work anymore since decompression was only done in the
non-coroutine case.
Decompressors are now sinks, just like compressors.
Also fixed a bug in bzip2 API handling (we have to handle BZ_RUN_OK
rather than BZ_OK), which we didn't notice because there was a missing
'throw':
if (ret != BZ_OK)
CompressionError("error while compressing bzip2 file");
It adds a new operation, cmdAddToStoreNar, that does the same thing as
the corresponding nix-daemon operation, i.e. call addToStore(). This
replaces cmdImportPaths, which has the major issue that it sends the
NAR first and the store path second, thus requiring us to store the
incoming NAR either in memory or on disk until we decide what to do
with it.
For example, this reduces the memory usage of
$ nix copy --to 'ssh://localhost?remote-store=/tmp/nix' /nix/store/95cwv4q54dc6giaqv6q6p4r02ia2km35-blender-2.79
from 267 MiB to 12 MiB.
Probably fixes#1988.
I hate to make this such a large check but the lack of documentation means we really have no idea what's allowed. All of them reported so far have been within ".app/Contents" directories. That appears to be a safe starting point. However, I would not be surprised to also find more paths that are disallowed for instance in .framework or .bundle directories.
Fixes#2031Fixes#2229
If a process disappears between the time /proc/[pid]/maps is opened and
the time it is read, the read() syscall will return ESRCH. This should be ignored.
In some versions/configurations libcurl doesn't handle timeouts
(especially DNS timeouts) in a way that wakes curl_multi_wait.
This doesn't appear to be a problem if using c-ares, FWIW.
This reduces memory consumption of
nix copy --from file://... --to ~/my-nix /nix/store/95cwv4q54dc6giaqv6q6p4r02ia2km35-blender-2.79
from 514 MiB to 18 MiB for an uncompressed binary cache, and from 192
MiB to 53 MiB for a bzipped binary cache. It may also be faster
because fetching can happen concurrently with decompression/writing.
Continuation of 48662d151b.
Issue https://github.com/NixOS/nix/issues/1681.
Allow global config settings to be defined in multiple Config
classes. For example, this means that libutil can have settings and
evaluator settings can be moved out of libstore. The Config classes
are registered in a new GlobalConfig class to which config files
etc. are applied.
Relevant to https://github.com/NixOS/nix/issues/2009 in that it
removes the need for ad hoc handling of useCaseHack, which was the
underlying cause of that issue.
Continuation of 97002b684c. This makes
the daemon use constant memory. For example, it reduces the daemon's
maximum RSS on
$ nix copy --from ~/my-nix --to daemon /nix/store/1n7x0yv8vq6zi90hfmian84vdhd04bgp-blender-2.79a
from 264 MiB to 7 MiB.
We now use a TunnelSource to prevent the connection from ending up in
an undefined state if an exception is thrown while the NAR is being
sent.
Issue https://github.com/NixOS/nix/issues/1681.
Don't bind-mount these to themselves,
mount them into the chroot directory.
Fixes pty issues when using sandbox on CentOS 7.4.
(build of perlPackages.IOTty fails before this change)
Fixes
error: getting status of '/nix/store/j8p0vv89k1pf0cn7kmfsdcs7bshwga1i-firefox-52.7.2esr/share/icons/hicolor/48x48/apps/firefox.png': No such file or directory
https://github.com/NixOS/nix/issues/1934
Also improve error message on directory/non-directory collisions.
For instance, this reduced the memory consumption of
$ nix copy --from ssh://localhost --to ~/my-nix /nix/store/1n7x0yv8vq6zi90hfmian84vdhd04bgp-blender-2.79a
from 632 MiB to 16 MiB.
E.g.
cannot build on 'ssh://mac1': cannot connect to 'mac1': bash: nix-store: command not found
cannot build on 'ssh://mac2': cannot connect to 'mac2': Host key verification failed.
cannot build on 'ssh://mac3': cannot connect to 'mac3': Received disconnect from 213... port 6001:2: Too many authentication failures
Authentication failed.
copyStorePath() now pipes the output of srcStore->narFromPath()
directly into dstStore->addToStore(). The sink used by the former is
converted into a source usable by the latter using
boost::coroutine2. This is based on [1].
This reduces the maximum resident size of
$ nix build --store ~/my-nix/ /nix/store/b0zlxla7dmy1iwc3g459rjznx59797xy-binutils-2.28.1 --substituters file:///tmp/binary-cache-xz/ --no-require-sigs
from 418592 KiB to 53416 KiB. (The previous commit also reduced the
runtime from ~4.2s to ~3.4s, not sure why.) A further improvement will
be to download files into a Sink.
[1] https://github.com/NixOS/nix/compare/master...Mathnerd314:dump-fix-coroutine#diff-dcbcac55a634031f9cc73707da6e4b18
Issue #1969.
This can be iterated on and currently leaves out settings we know we
want to forward, but it fixes#1713 and fixes#1935 and isn't
fundamentally broken like the status quo. Future changes are suggested
in a comment.
This allows building armv[67]l-linux derivations on compatible aarch64
machines. Failure to add the architecture may result from missing
hardware support, in which case we can't run 32-bit binaries and don't
need to restrict them with seccomp anyway,
This allows specifying additional systems that a machine is able to
build for. This may apply on some armv7-capable aarch64 processors, or
on systems using qemu-user with binfmt-misc to support transparent
execution of foreign-arch programs.
This removes the previous hard-coded assumptions about which systems are
ABI-compatible with which other systems, and instead relies on the user
to specify any additional platforms that they have ensured compatibility
for and wish to build for locally.
NixOS should probably add i686-linux on x86_64-linux systems for this
setting by default.
The overhead of sandbox builds is a problem on NixOS (since building a
NixOS configuration involves a lot of small derivations) but not for
typical non-NixOS use cases. So outside of NixOS we can enable it.
Issue #179.
Previously, this would fail at startup for non-NixOS installs:
nix-env --help
The fix for this is to just use "nixManDir" as the value for MANPATH
when spawning "man".
To test this, I’m using the following:
$ nix-build release.nix -A build
$ MANPATH= ./result/bin/nix-env --help
Fixes#1627
This was caused by derivations with 'allowSubstitutes = false'. Such
derivations will be built locally. However, if there is another
SubstitionGoal that has the output of the first derivation in its
closure, then the path will be simultaneously built and substituted.
There was a check to catch this situation (via pathIsLockedByMe()),
but it no longer worked reliably because substitutions are now done in
another thread. (Thus the comment 'It can't happen between here and
the lockPaths() call below because we're not allowing multi-threading'
was no longer valid.)
The fix is to handle the path already being locked in both
SubstitutionGoal and DerivationGoal.
All ANSI sequences except color setting are now filtered out. In
particular, terminal resets (such as from NixOS VM tests) are filtered
out.
Also, fix the completely broken tab character handling.
builtins.path allows specifying the name of a path (which makes paths
with store-illegal names now addable), allows adding paths with flat
instead of recursive hashes, allows specifying a filter (so is a
generalization of filterSource), and allows specifying an expected
hash (enabling safe path adding in pure mode).
This is needed by nixos-install, which uses the Nix store on the
installation CD as a substituter. We don't want to disable signature
checking entirely because substitutes from cache.nixos.org should
still be checked. So now we can pas "local?trusted=1" to mark only the
Nix store in /nix as not requiring signatures.
Fixes#1819.
Instead, if a fixed-output derivation produces has an incorrect output
hash, we now unconditionally move the outputs to the path
corresponding with the actual hash and register it as valid. Thus,
after correcting the hash in the Nix expression (e.g. in a fetchurl
call), the fixed-output derivation doesn't have to be built again.
It would still be good to have a command for reporting the actual hash
of a fixed-output derivation (instead of throwing an error), but
"nix-build --hash" didn't do that.
Following discussion with Shea and Graham. It's a big enough change
from the last release. Also, from a semver perspective, 2.0 makes more
sense because we did remove some interfaces (like nix-pull/nix-push).
Some servers, such as Artifactory, allow uploading with PUT and BASIC
auth. This allows nix copy to work to upload binaries to those
servers.
Worked on together with @adelbertc
In this mode, the following restrictions apply:
* The builtins currentTime, currentSystem and storePath throw an
error.
* $NIX_PATH and -I are ignored.
* fetchGit and fetchMercurial require a revision hash.
* fetchurl and fetchTarball require a sha256 attribute.
* No file system access is allowed outside of the paths returned by
fetch{Git,Mercurial,url,Tarball}. Thus 'nix build -f ./foo.nix' is
not allowed.
Thus, the evaluation result is completely reproducible from the
command line arguments. E.g.
nix build --pure-eval '(
let
nix = fetchGit { url = https://github.com/NixOS/nixpkgs.git; rev = "9c927de4b179a6dd210dd88d34bda8af4b575680"; };
nixpkgs = fetchGit { url = https://github.com/NixOS/nixpkgs.git; ref = "release-17.09"; rev = "66b4de79e3841530e6d9c6baf98702aa1f7124e4"; };
in (import (nix + "/release.nix") { inherit nix nixpkgs; }).build.x86_64-linux
)'
The goal is to enable completely reproducible and traceable
evaluation. For example, a NixOS configuration could be fully
described by a single Git commit hash. 'nixos-rebuild' would do
something like
nix build --pure-eval '(
(import (fetchGit { url = file:///my-nixos-config; rev = "..."; })).system
')
where the Git repository /my-nixos-config would use further fetchGit
calls or Git externals to fetch Nixpkgs and whatever other
dependencies it has. Either way, the commit hash would uniquely
identify the NixOS configuration and allow it to reproduced.
E.g.
$ time nix cat-store --store https://cache.nixos.org?local-nar-cache=/tmp/nars \
/nix/store/b0w2hafndl09h64fhb86kw6bmhbmnpm1-blender-2.79/share/icons/hicolor/scalable/apps/blender.svg > /dev/null
real 0m4.139s
$ time nix cat-store --store https://cache.nixos.org?local-nar-cache=/tmp/nars \
/nix/store/b0w2hafndl09h64fhb86kw6bmhbmnpm1-blender-2.79/share/icons/hicolor/scalable/apps/blender.svg > /dev/null
real 0m0.024s
(Before, the second call took ~0.220s.)
This will use a NAR listing in
/tmp/nars/b0w2hafndl09h64fhb86kw6bmhbmnpm1.ls containing all metadata,
including the offsets of regular files inside the NAR. Thus, we don't
need to read the entire NAR. (We do read the entire listing, but
that's generally pretty small. We could use a SQLite DB by borrowing
some more code from nixos-channel-scripts/file-cache.hh.)
This is primarily useful when Hydra is serving files from an S3 binary
cache, in particular when you have giant NARs. E.g. we had some 12 GiB
NARs, so accessing individuals files was pretty slow.
The name had become a misnomer since it's not only for substitution
from binary caches, but when adding/copying any
(non-content-addressed) path to a store.
This allows specifying the AWS configuration profile to use. E.g.
nix copy --from s3://my-cache?profile=aws-dev-account /nix/store/cf3isrlqavvd5w7rpky1fa8j9lcnlggm-...
As far as we're concerned, not being able to access a file just means
the file is missing. Plus, AWS explicitly goes out of its way to
return a 403 if the file is missing and the requester doesn't have
permission to list the bucket.
Also getting rid of an old hack that Eelco said was only relevant
to an older AWS SDK.
This will allow bind and connect to 127.0.0.1, which can reduce purity/
security (if you're running a vulnerable service on localhost) but is
also needed for a ton of test suites, so I'm leaving it turned off by
default but allowing certain derivations to turn it on as needed.
It also allows DNS resolution of arbitrary hostnames but I haven't found
a way to avoid that. In principle I'd just want to allow resolving
localhost but that doesn't seem to be possible.
I don't think this belongs under `build-use-sandbox = relaxed` because we
want it on Hydra and I don't think it's the end of the world.
The computation of urlHash didn't take the name into account, so
subsequent fetchurl calls with the same URL but a different name would
resolve to the same cached store path.
You can now include files via the "builders" option, using the syntax
"@<filename>". Having only one option makes it easier to override
builders completely.
For backward compatibility, the default is "@/etc/nix/machines", or
"@<filename>" for each file name in NIX_REMOTE_SYSTEMS.
This makes it slightly more manageable to see at a glance what in a
build's sandbox profile is unique to the build and what is standard. Also
a first step to factoring more of our Darwin logic into scheme functions
that will allow us a bit more flexibility. And of course less of that
nasty codegen in C++! 😀
This speeds up commands like "nix cat-store". For example:
$ time nix cat-store --store https://cache.nixos.org?local-nar-cache=/tmp/nar-cache /nix/store/i60yncmq6w9dyv37zd2k454g0fkl3arl-systemd-234/etc/udev/udev.conf
real 0m4.336s
$ time nix cat-store --store https://cache.nixos.org?local-nar-cache=/tmp/nar-cache /nix/store/i60yncmq6w9dyv37zd2k454g0fkl3arl-systemd-234/etc/udev/udev.conf
real 0m0.045s
The primary motivation is to allow hydra-server to serve files from S3
binary caches. Previously Hydra had a hack to do "nix-store -r
<path>", but that fetches the entire closure so is prohibitively
expensive.
There is no garbage collection of the NAR cache yet. Also, the entire
NAR is read when accessing a single member file. We could generate the
NAR listing to provide random access.
Note: the NAR cache is indexed by the store path hash, not the content
hash, so NAR caches should not be shared between binary caches, unless
you're sure that all your builds are binary-reproducible.
Probably as a result of a bad merge in
4b8f1b0ec0, we had both a
BinaryCacheStoreAccessor and a
RemoteFSAccessor. BinaryCacheStore::getFSAccessor() returned the
latter, but BinaryCacheStore::addToStore() checked for the
former. This probably caused hydra-queue-runner to download paths that
it just uploaded.
I needed this to test ACL/xattr removal in
canonicalisePathMetaData(). Might also be useful if you need to build
old Nixpkgs that doesn't have the required patches to remove
setuid/setgid creation.
It was getting too much like whac-a-mole listing all the retriable error
conditions, so we now retry by default and list the cases where retrying
is almost certainly hopeless.
This is a hack to make hydra-queue-runner free its temproots
periodically, thereby ensuring that garbage collection of the
corresponding paths is not blocked until the queue runner is
restarted.
It would be better if temproots could be released earlier than at
process exit. I started working on a RAII object returned by functions
like addToStore() that releases temproots. However, this would be a
pretty massive change so I gave up on it for now.
For example,
$ nix-store -q --roots /nix/store/7phd2sav7068nivgvmj2vpm3v47fd27l-patchelf-0.8pre845_0315148
{temp:1}
denotes that the path is only being kept alive by a temporary root
(i.e. /nix/var/nix/temproots/). Similarly,
$ nix-store --gc --print-roots
...
{memory:9} -> /nix/store/094gpjn9f15ip17wzxhma4r51nvsj17p-curl-7.53.1
shows that curl is being used by some process.
Since we may use a dedicated file descriptor in the future, this
allows us to change it. So builders can do
if [[ -n $NIX_LOG_FD ]]; then
echo "@nix { message... }" >&$NIX_LOG_FD
fi
Nix can now automatically run the garbage collector during builds or
while adding paths to the store. The option "min-free = <bytes>"
specifies that Nix should run the garbage collector whenever free
space in the Nix store drops below <bytes>. It will then delete
garbage until "max-free" bytes are available.
Garbage collection during builds is asynchronous; running builds are
not paused and new builds are not blocked. However, there also is a
synchronous GC run prior to the first build/substitution.
Currently, no old GC roots are deleted (as in "nix-collect-garbage
-d").
Since file locks are per-process rather than per-file-descriptor, the
garbage collector would always acquire a lock on its own temproots
file and conclude that it's stale.
Without this, substitute info is fetched sequentially, which is
superslow. In the old UI (e.g. nix-build), we call printMissing(),
which calls queryMissing(), thereby preheating the binary cache
cache. But the new UI doesn't do that.
In particular, drop the "build-" and "gc-" prefixes which are
pointless. So now you can say
nix build --no-sandbox
instead of
nix build --no-build-use-sandbox
In particular, don't use base-64, which we don't support. (We do have
base-32 redirects for hysterical reasons.)
Also, add a test for the hashed mirror feature.
This allows builds to call setuid binaries. This was previously
possible until we started using seccomp. Turns out that seccomp by
default disallows processes from acquiring new privileges. Generally,
any use of setuid binaries (except those created by the builder
itself) is by definition impure, but some people were relying on this
ability for certain tests.
Example:
$ nix build '(with import <nixpkgs> {}; runCommand "foo" {} "/run/wrappers/bin/ping -c 1 8.8.8.8; exit 1")' --no-allow-new-privileges
builder for ‘/nix/store/j0nd8kv85hd6r4kxgnwzvr0k65ykf6fv-foo.drv’ failed with exit code 1; last 2 log lines:
cannot raise the capability into the Ambient set
: Operation not permitted
$ nix build '(with import <nixpkgs> {}; runCommand "foo" {} "/run/wrappers/bin/ping -c 1 8.8.8.8; exit 1")' --allow-new-privileges
builder for ‘/nix/store/j0nd8kv85hd6r4kxgnwzvr0k65ykf6fv-foo.drv’ failed with exit code 1; last 6 log lines:
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=46 time=15.2 ms
Fixes#1429.
Functions like copyClosure() had 3 bool arguments, which creates a
severe risk of mixing up arguments.
Also, implement copyClosure() using copyPaths().
Cygwin sqlite3 is patched to call SetDllDirectory("/usr/bin") on init, which
affects the current process and is inherited by child processes. It causes
DLLs to be loaded from /usr/bin/ before $PATH, which breaks all sorts of
things. A typical failures would be header/lib version mismatches (e.g.
openssl when running checkPhase on openssh). We'll just set it back to the
default value.
Note that this is a problem with the cygwin version of sqlite3 (currently
3.18.0). nixpkgs doesn't have the problematic patch.
Recently aws-sdk-cpp quietly switched to using S3 virtual host URIs
(https://github.com/aws/aws-sdk-cpp/commit/69d9c53882), i.e. it sends
requests to http://<bucket>.<region>.s3.amazonaws.com rather than
http://<region>.s3.amazonaws.com/<bucket>. However this interacts
badly with curl connection reuse. For example, if we do the following:
1) Check whether a bucket exists using GetBucketLocation.
2) If it doesn't, create it using CreateBucket.
3) Do operations on the bucket.
then 3) will fail for a minute or so with a NoSuchBucket exception,
presumably because the server being hit is a fallback for cases when
buckets don't exist.
Disabling the use of virtual hosts ensures that 3) succeeds
immediately. (I don't know what S3's consistency guarantees are for
bucket creation, but in practice buckets appear to be available
immediately.)
Newer versions of aws-sdk-cpp call CalculateDelayBeforeNextRetry()
even for non-retriable errors (like NoSuchKey) whih causes log spam in
hydra-queue-runner.
Sandboxes cannot be nested, so if Nix's build runs inside a sandbox,
it cannot use a sandbox itself. I don't see a clean way to detect
whether we're in a sandbox, so use a test-specific hack.
https://github.com/NixOS/nix/issues/1413
In particular, UF_IMMUTABLE (uchg) needs to be cleared to allow the
path to be garbage-collected or optimised.
See https://github.com/NixOS/nixpkgs/issues/25819.
+ the file from being garbage-collected.
