Commit graph

2003 commits

Author SHA1 Message Date
Robert Hensing
da2b59a088
Merge pull request #8047 from lovesegfault/always-allow-substitutes
feat: add always-allow-substitutes
2023-10-13 15:42:11 +02:00
Ninlives
94e91566ed
Allow CLI to pass environment variables to FOD builder (#8830)
Add a new experimental `impure-env` setting that is a key-value list of
environment variables to inject into FOD derivations that specify the
corresponding `impureEnvVars`.

This allows clients to make use of this feature (without having to change the
environment of the daemon itself) and might eventually deprecate the current
behaviour (pick whatever is in the environment of the daemon) as it's more
principled and might prevent information leakage.
2023-10-11 11:58:42 +00:00
Valentin Gagarin
1e1f08c045 annotate admonitions showing syntax
also fix typos
2023-10-10 00:45:19 +02:00
John Ericson
be81764320 Factor out bits of the worker protocol to use elsewhere
This introduces some shared infrastructure for our notion of protocols.
We can then define multiple protocols in terms of that notion.
We an also express how particular protocols depend on each other.

For example, we can define a common protocol and a worker protocol,
where the second depends on the first in terms of the data types it can
read and write.

The "serve" protocol can just use the common one for now, but will
eventually need its own machinary just like the worker protocol for
version-aware serialisers
2023-10-09 16:55:12 -04:00
John Ericson
2f0b508c29 Get rid of bootstrap.sh
For people working on Nix with `nix develop`, it's better to just use
`autoreconfPhase` and `configurePhase`, which is standard Nixpkgs / nix
shell make from Nixpkgs practice --- it is good to emphasize the degree
to which Nix is *just* a regular C++ project which can be worked on in
the regular way.

(For people running `nix-shell`, the story is similar, except
`configurePhase` would use non-writable store paths, which matters for
hte times we use output paths before `make install`, so I kept the
existing `./configure ...` instruction.)

For people building Nix without Nix (e.g. packaging it for another
distro) they also don't need `bootstrap.sh`, and can just run
`autoreconf -vfi` directly. (More likely, they have their own idioms to
do this just as we have `autoreconfPhase`.)
2023-10-09 12:55:58 -04:00
John Ericson
22513c91dc
Merge pull request #8942 from fricklerhandwerk/option-anchors
always show anchors on setting listings
2023-10-09 11:29:36 -04:00
John Ericson
838be5e4a0
Merge pull request #9114 from fricklerhandwerk/lookup-path
introduce lookup paths as a distinct language construct
2023-10-09 11:28:40 -04:00
John Ericson
ead65d3d8e
Merge pull request #9110 from fricklerhandwerk/interpolated-expression
expand on interpolated expressions
2023-10-09 10:56:19 -04:00
Eelco Dolstra
c8eb3b82e9
Merge pull request #9129 from fricklerhandwerk/ae-be
AE -> BE; fix redirects
2023-10-09 16:56:07 +02:00
John Ericson
217d863f7a Merge branch 'master' into lookup-path 2023-10-09 10:54:54 -04:00
John Ericson
67eddc05ef
Merge pull request #9116 from fricklerhandwerk/doc-import
reword and reformat description of `builtins.import`
2023-10-09 10:26:41 -04:00
John Ericson
81d3a8542a
doc: Slight reword of "interpolated expression" in paragraph
I was sleepy and confused that "interpolated expression" was a new type of thing at first. This nudges the reader to understand that its just a regular expression, and these conditions are imposed by the interpolation operation.
2023-10-09 10:21:18 -04:00
Valentin Gagarin
0246de1896 remove unnecessary indentation from markdown list
this makes it a bit easier to work with, as some tooling doesn't work
well with too much indentation.
2023-10-09 10:14:29 +02:00
Valentin Gagarin
896a905202 AE -> BE; fix redirects 2023-10-09 10:07:46 +02:00
Valentin Gagarin
f00a5eb11b introduce lookup paths as a distinct language construct
so far they did not really have a name, and were at best referred to as
"angle bracket syntax".
2023-10-07 04:44:09 +02:00
Valentin Gagarin
a7ba8c3f4a complete example on attribute name interpolation 2023-10-07 02:49:55 +02:00
Valentin Gagarin
a67cee965a expand on interpolated expressions 2023-10-07 02:49:55 +02:00
Valentin Gagarin
517c547dec remove duplicate redirects entry 2023-10-06 23:34:08 +02:00
John Ericson
68c81c7375 Put functional tests in tests/functional
I think it is bad for these reasons when `tests/` contains a mix of
functional and integration tests

 - Concepts is harder to understand, the documentation makes a good
   unit vs functional vs integration distinction, but when the
   integration tests are just two subdirs within `tests/` this is not
   clear.

 - Source filtering in the `flake.nix` is more complex. We need to
   filter out some of the dirs from `tests/`, rather than simply pick
   the dirs we want and take all of them. This is a good sign the
   structure of what we are trying to do is not matching the structure
   of the files.

With this change we have a clean:
```shell-session
$ git show 'HEAD:tests'
tree HEAD:tests

functional/
installer/
nixos/
```
2023-10-06 09:05:56 -04:00
Valentin Gagarin
369b076986 add links and anchors 2023-10-06 11:46:41 +02:00
Valentin Gagarin
d12fb4b1f1
Merge pull request #9017 from fricklerhandwerk/contributing-docs
add contributing guide for documentation
2023-10-05 09:23:27 +02:00
Valentin Gagarin
e0e47c0a68 accommodate inconsistent output from lowdown
the `term` output mode leaves inline HTML around verbatim, while `nroff`
mode (used for `man` pages) does not.

the correct solution would be to pre-render all output with a more
benign tool so we have less liabilities in our own code, but this has to
do for now.
2023-10-05 01:20:26 +02:00
Valentin Gagarin
64b73476ce always show anchors on setting listings
refactor the templates for readability
2023-10-05 00:05:08 +02:00
Maximilian Bosch
42e3c6d658 doc: reference NIX_ATTRS_*_FILE vars at the env var reference for drvs 2023-10-01 13:25:29 +01:00
Maximilian Bosch
bfdd908f7d structured attrs: improve support / usage of NIX_ATTRS_{SH,JSON}_FILE
In #4770 I implemented proper `nix-shell(1)` support for derivations
using `__structuredAttrs = true;`. Back then we decided to introduce two
new environment variables, `NIX_ATTRS_SH_FILE` for `.attrs.sh` and
`NIX_ATTRS_JSON_FILE` for `.attrs.json`. This was to avoid having to
copy these files to `$NIX_BUILD_TOP` in a `nix-shell(1)` session which
effectively meant copying these files to the project dir without
cleaning up afterwords[1].

On last NixCon I resumed hacking on `__structuredAttrs = true;` by
default for `nixpkgs` with a few other folks and getting back to it,
I identified a few problems with the how it's used in `nixpkgs`:

* A lot of builders in `nixpkgs` don't care about the env vars and
  assume that `.attrs.sh` and `.attrs.json` are in `$NIX_BUILD_TOP`.
  The sole reason why this works is that `nix-shell(1)` sources
  the contents of `.attrs.sh` and then sources `$stdenv/setup` if it
  exists. This may not be pretty, but it mostly works. One notable
  difference when using nixpkgs' stdenv as of now is however that
  `$__structuredAttrs` is set to `1` on regular builds, but set to
  an empty string in a shell session.

  Also, `.attrs.json` cannot be used in shell sessions because
  it can only be accessed by `$NIX_ATTRS_JSON_FILE` and not by
  `$NIX_BUILD_TOP/.attrs.json`.

  I considered changing Nix to be compatible with what nixpkgs
  effectively does, but then we'd have to either move $NIX_BUILD_TOP for
  shell sessions to a temporary location (and thus breaking a lot of
  assumptions) or we'd reintroduce all the problems we solved back then
  by using these two env vars.

  This is partly because I didn't document these variables back
  then (mea culpa), so I decided to drop all mentions of
  `.attrs.{json,sh}` in the  manual and only refer to `$NIX_ATTRS_SH_FILE`
  and `$NIX_ATTRS_JSON_FILE`. The same applies to all our integration tests.
  Theoretically we could deprecated using `"$NIX_BUILD_TOP"/.attrs.sh` in
  the future now.

* `nix develop` and `nix print-dev-env` don't support this environment
  variable at all even though they're supposed to be part of the replacement
  for `nix-shell` - for the drv debugging part to be precise.

  This isn't a big deal for the vast majority of derivations, i.e.
  derivations relying on nixpkgs' `stdenv` wiring things together
  properly. This is because `nix develop` effectively "clones" the
  derivation and replaces the builder with a script that dumps all of
  the environment, shell variables, functions etc, so the state of
  structured attrs being "sourced" is transmitted into the dev shell and
  most of the time you don't need to worry about `.attrs.sh` not
  existing because the shell is correctly configured and the

      if [ -e .attrs.sh ]; then source .attrs.sh; fi

  is simply omitted.

  However, this will break when having a derivation that reads e.g. from
  `.attrs.json` like

      with import <nixpkgs> {};
      runCommand "foo" { __structuredAttrs = true; foo.bar = 23; } ''
        cat $NIX_ATTRS_JSON_FILE # doesn't work because it points to /build/.attrs.json
      ''

  To work around this I employed a similar approach as it exists for
  `nix-shell`: the `NIX_ATTRS_{JSON,SH}_FILE` vars are replaced with
  temporary locations.

  The contents of `.attrs.sh` and `.attrs.json` are now written into the
  JSON by `get-env.sh`, the builder that `nix develop` injects into the
  derivation it's debugging. So finally the exact file contents are
  present and exported by `nix develop`.

  I also made `.attrs.json` a JSON string in the JSON printed by
  `get-env.sh` on purpose because then it's not necessary to serialize
  the object structure again. `nix develop` only needs the JSON
  as string because it's only written into the temporary file.

  I'm not entirely sure if it makes sense to also use a temporary
  location for `nix print-dev-env` (rather than just skipping the
  rewrite in there), but this would probably break certain cases where
  it's relied upon `$NIX_ATTRS_SH_FILE` to exist (prime example are the
  `nix print-dev-env` test-cases I wrote in this patch using
  `tests/shell.nix`, these would fail because the env var exists, but it
  cannot read from it).

[1] https://github.com/NixOS/nix/pull/4770#issuecomment-836799719
2023-10-01 13:22:48 +01:00
Théophane Hufschmitt
784c7df5bf
Merge pull request #9004 from fricklerhandwerk/release-support
add information on release cycle and backports
2023-09-29 15:04:00 +02:00
Théophane Hufschmitt
a66bd8f1f2
Merge pull request #9065 from fricklerhandwerk/testing-hints
add hint for troubleshooting tests
2023-09-29 13:52:54 +02:00
Valentin Gagarin
1dd03c62ad add hint for troubleshooting tests 2023-09-29 10:46:42 +02:00
tomberek
976f596579
Merge branch 'master' into tomberek.absolute.attrpath.notation 2023-09-28 10:01:57 -04:00
Ilan Joselevich
13ed5d7106 flakes: adopt repl-flake behavior as default 2023-09-27 20:47:10 -04:00
Robert Hensing
ea2fa8b6f3
Merge pull request #8241 from Luabee/patch-1
Mention `$DRV_PATH` in post-build-hook docs
2023-09-28 00:11:00 +01:00
Robert Hensing
dafa38213b
Update doc/manual/src/advanced-topics/post-build-hook.md
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
2023-09-27 23:10:39 +01:00
Théophane Hufschmitt
c6faef61a6
Merge pull request #8923 from obsidiansystems/test-proto
Unit test some worker protocol serializers
2023-09-26 17:12:24 +02:00
Eelco Dolstra
706b91ef62
Merge pull request #9044 from fricklerhandwerk/doc-realise
realisation: reformat for readability
2023-09-26 15:28:20 +02:00
Valentin Gagarin
a757749fcf reword for readability 2023-09-26 06:28:17 +02:00
Valentin Gagarin
9428d7dcd1
Merge pull request #9045 from fricklerhandwerk/fix-redirects
fix broken redirects script
2023-09-26 04:27:33 +02:00
Valentin Gagarin
503b02d3f8
Merge pull request #9046 from fricklerhandwerk/fixup-derivation
fix broken reference link
2023-09-26 04:27:23 +02:00
Valentin Gagarin
60a155d01c
Merge pull request #8706 from fricklerhandwerk/doc-system-features
document system features
2023-09-26 04:21:31 +02:00
Valentin Gagarin
b17f200b11
Document "Import From Derivation" (#7332)
* document "Import From Derivation"

Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: John Ericson <git@JohnEricson.me>
2023-09-26 01:49:03 +00:00
Valentin Gagarin
c6f8247032 fix broken reference link 2023-09-26 03:10:12 +02:00
Théophane Hufschmitt
9a78d87bc0
Merge pull request #6614 from RasmusRendal/spaces
Implement support for percent encoded filepaths for flakerefs
2023-09-26 02:27:09 +02:00
Valentin Gagarin
45de35bcf1 fix broken redirects script 2023-09-26 01:24:07 +02:00
Valentin Gagarin
887cbcd395 add contributing guide for documentation 2023-09-26 01:06:47 +02:00
Valentin Gagarin
5b0336b3b1 reword example for clarity 2023-09-26 00:58:50 +02:00
Valentin Gagarin
7de66f19f8 example: headers -> dev
make the example more realistic, since `headers` is not an output name
used in Nixpkgs

Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
2023-09-26 00:46:27 +02:00
Valentin Gagarin
75a231147f be more precise about system semantics 2023-09-26 00:45:00 +02:00
Valentin Gagarin
5e4734a08b reword to avoid saying "build"
derivations are about data transformation, so the term "build" does not
add any information. there was also some feedback that "build task" is
not more helpful than "derivation" if you have no prior experience with
Nix or build systems, while existing associations may be misleading.
2023-09-26 00:45:00 +02:00
Valentin Gagarin
17884f54d1 clarification on extra attributes
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
2023-09-26 00:45:00 +02:00
Valentin Gagarin
026c24e378 add example for store path using the given name 2023-09-26 00:45:00 +02:00
Valentin Gagarin
d621dd17f2 more precise wording
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
2023-09-26 00:45:00 +02:00