Instead, `Hash` uses `std::optional<HashType>`. In the future, we may
also make `Hash` itself require a known hash type, encoraging people to
use `std::optional<Hash>` instead.
Caches tree in addition to lockedRef, and explicitly writes out the logic for different combinations of cached/uncached flakes and indirect/resolved/locked flakes. This eliminates uneccessary calls to lookupInFlakeCache, fetchTree, maybeLookupFlake, and flakeCache.push_back
As `git fetch` may chose to interpret refspec to it's liking, ensure that we
only pass refs that begin with `refs/` as is, otherwise, prepend them with
`refs/heads`. Otherwise, branches named `heads/foo` (I know it's bad, but it's
allowed), would be fetched as `foo`, instead of `heads/foo`.
The previous regex was too strict and did not match what git was allowing. It
could lead to `fetchGit` not accepting valid branch names, even though they
exist in a repository (for example, branch names containing `/`, which are
pretty standard, like `release/1.0` branches).
The new regex defines what a branch name should **NOT** contain. It takes the
definitions from `refs.c` in https://github.com/git/git and `git help
check-ref-format` pages.
This change also introduces a test for ref name validity checking, which
compares the result from Nix with the result of `git check-ref-format --branch`.
The attributes previously stored in TreeInfo (narHash, revCount,
lastModified) are now stored in Input. This makes it less arbitrary
what attributes are stored where.
As a result, the lock file format has changed. An entry like
"info": {
"lastModified": 1585405475,
"narHash": "sha256-bESW0n4KgPmZ0luxvwJ+UyATrC6iIltVCsGdLiphVeE="
},
"locked": {
"owner": "NixOS",
"repo": "nixpkgs",
"rev": "b88ff468e9850410070d4e0ccd68c7011f15b2be",
"type": "github"
},
is now stored as
"locked": {
"owner": "NixOS",
"repo": "nixpkgs",
"rev": "b88ff468e9850410070d4e0ccd68c7011f15b2be",
"type": "github",
"lastModified": 1585405475,
"narHash": "sha256-bESW0n4KgPmZ0luxvwJ+UyATrC6iIltVCsGdLiphVeE="
},
The 'Input' class is now a dumb set of attributes. All the fetcher
implementations subclass InputScheme, not Input. This simplifies the
API.
Also, fix substitution of flake inputs. This was broken since lazy
flake fetching started using fetchTree internally.
The idea is it's always more flexible to consumer a `Source` than a
plain string, and it might even reduce memory consumption.
I also looked at `addToStoreFromDump` with its `// FIXME: remove?`, but
the worked needed for that is far more up for interpretation, so I
punted for now.
This moves the actual parsing of configuration contents into applyConfig
which applyConfigFile is then going to call. By changing this we can now
test the configuration file parsing without actually create a file on
disk.
This makes 'nix flake' less cluttered and more consistent (it's only
subcommands that operator on a flake). Also, the registry is not
inherently flake-related (e.g. fetchTree could also use it to remap
inputs).
This completes flakerefs using the registry (e.g. 'nix<TAB>' => 'nix
nixpkgs') and flake output attributes by evaluating the flake
(e.g. 'dwarffs#nix<TAB>' => 'dwarffs#nixosModules').
InstallableValue has children InstallableFlake and InstallableAttrPath, but InstallableFlake was overriding toDerivations, and usage was changed so that InstallableFlake didn't need cmd. So these changes were made:
InstallableValue::toDerivations() -> InstalllableAttrPath::toDerivations()
InstallableValue::cmd -> InstallableAttrPath::cmd
InstallableValue uses state instead of cmd
toBuildables() and toDerivations() were made abstract
- result list will be always empty if --json is passed
- for scripts an empty search result is not really an error,
we rather want to distinguish between evaluation errors and empty results
The raw stderr output isn't logged anymore so the build logs need to be
printed by the default logger in order for the old commands like
nix-build to still show build output.
For remote stores the log messages are already forwarded as structured
STDERR_RESULT messages so the old format is duplicate information. But
still included with -vvv since it could be useful for debugging
problems.
$ nix build -L /nix/store/nl71b2niws857ffiaggyrkjwgx9jjzc0-foo.drv --store ssh-ng://localhost
Hello World!
foo> Hello World!
[1/0/1 built] building foo
Fixes#3556
When used with `readFile`, we have a pretty good heuristic of the file
size, so `reserve` this in the `string`. This will save some allocation
/ copy when the string is growing.
This means you now get an error message *before* stuff gets built:
$ nix copy .#hydraJobs.vendoredCrates
error: you must pass '--from' and/or '--to'
Try 'nix --help' for more information.
The commit 3cc1125595 adds a `grantpt`
call on the builder pseudo terminal fd. This call is actually only
required for MacOS, but it however requires a RW access to /dev/pts
which is only RO bindmounted in the Bazel Linux sandbox. So, Nix can
not be actually run in the Bazel Linux sandbox for unneeded reasons.
This closes#3026 by allowing `builtins.readFile` to read a file with a
wrongly reported file size, for example, files in `/proc` may report a
file size of 0. Reading file in `/proc` is not a good enough motivation,
however I do think it just makes nix more robust by allowing more file
to be read. Especially, I do considerer the previous behavior to be
dangerous because nix was previously reading truncated files. Examples
of file system which incorrectly report file size may be network file
system or dynamic file system (for performance reason, a dynamic file
system such as FUSE may generate the content of the file on demand).
```
nix-repl> builtins.readFile "/proc/version"
""
```
With this commit:
```
nix-repl> builtins.readFile "/proc/version"
"Linux version 5.6.7 (nixbld@localhost) (gcc version 9.3.0 (GCC)) #1-NixOS SMP Thu Apr 23 08:38:27 UTC 2020\n"
```
Here is a summary of the behavior changes:
- If the reported size is smaller, previous implementation
was silently returning a truncated file content. The new implementation
is returning the correct file content.
- If a file had a bigger reported file size, previous implementation was
failing with an exception, but the new implementation is returning the
correct file content. This change of behavior is coherent with this pull
request.
Open questions
- The behavior is unchanged for correctly reported file size, however
performances may vary because it uses the more complex sink interface.
Considering that sink is used a lot, I don't think this impacts the
performance a lot.
- `builtins.readFile` on an infinite file, such as `/dev/random` may
fill the memory.
- it does not support adding file to store, such as `${/proc/version}`.
In particular, doing 'nix build /path/to/dir' now works if
/path/to/dir is not a Git tree (it only has to contain a flake.nix
file).
Also, 'nix flake init' no longer requires a Git tree (but it will do a
'git add flake.nix' if it's a Git tree)
Suppose I have a path /nix/store/[hash]-[name]/a/a/a/a/a/[...]/a,
long enough that everything after "/nix/store/" is longer than 4096
(MAX_PATH) bytes.
Nix will happily allow such a path to be inserted into the store,
because it doesn't look at all the nested structure. It just cares
about the /nix/store/[hash]-[name] part. But, when the path is deleted,
we encounter a problem. Nix will move the path to /nix/store/trash, but
then when it's trying to recursively delete the trash directory, it will
at some point try to unlink
/nix/store/trash/[hash]-[name]/a/a/a/a/a/[...]/a. This will fail,
because the path is too long. After this has failed, any store deletion
operation will never work again, because Nix needs to delete the trash
directory before recreating it to move new things to it. (I assume this
is because otherwise a path being deleted could already exist in the
trash, and then moving it would fail.)
This means that if I can trick somebody into just fetching a tarball
containing a path of the right length, they won't be able to delete
store paths or garbage collect ever again, until the offending path is
manually removed from /nix/store/trash. (And even fixing this manually
is quite difficult if you don't understand the issue, because the
absolute path that Nix says it failed to remove is also too long for
rm(1).)
This patch fixes the issue by making Nix's recursive delete operation
use unlinkat(2). This function takes a relative path and a directory
file descriptor. We ensure that the relative path is always just the
name of the directory entry, and therefore its length will never exceed
255 bytes. This means that it will never even come close to AX_PATH,
and Nix will therefore be able to handle removing arbitrarily deep
directory hierachies.
Since the directory file descriptor is used for recursion after being
used in readDirectory, I made a variant of readDirectory that takes an
already open directory stream, to avoid the directory being opened
multiple times. As we have seen from this issue, the less we have to
interact with paths, the better, and so it's good to reuse file
descriptors where possible.
I left _deletePath as succeeding even if the parent directory doesn't
exist, even though that feels wrong to me, because without that early
return, the linux-sandbox test failed.
Reported-by: Alyssa Ross <hi@alyssa.is>
Thanks-to: Puck Meerburg <puck@puckipedia.com>
Tested-by: Puck Meerburg <puck@puckipedia.com>
Reviewed-by: Puck Meerburg <puck@puckipedia.com>
Reduces the number of store queries it performs. Also prints a warning
if any of the selectors did not match any installed derivations.
UX Caveats:
- Will print a warning that nothing matched if a previous selector
already removed the path
- Will not do anything if no selectors were provided (no change from
before).
Fixes#3531
In particular, we store whether an attribute failed to evaluate (threw
an exception) or was an unsupported type. This is to ensure that a
repeated 'nix flake show' never has to evaluate anything, so it can
execute without fetching the flake.
With this, 'nix flake show nixpkgs/nixos-20.03 --legacy' executes in
0.6s (was 3.4s).
This speeds up the creation of the cache for the nixpkgs flake from
21.2s to 10.2s. Oddly, it also speeds up querying the cache
(i.e. running 'nix flake show nixpkgs/nixos-20.03 --legacy') from 4.2s
to 3.4s.
(For comparison, running with --no-eval-cache takes 9.5s, so the
overhead of building the SQLite cache is only 0.7s.)
In the fully cached case for the 'nixpkgs' flake, it went from 101s to
4.6s. Populating the cache went from 132s to 17.4s (which could
probably be improved further by combining INSERTs).
Usually this just writes to stdout, but for ProgressBar, we need to
clear the current line, write the line to stdout, and then redraw the
progress bar.
(cherry picked from commit 696c026006)
Usually this just writes to stdout, but for ProgressBar, we need to
clear the current line, write the line to stdout, and then redraw the
progress bar.
Motivation: maintain project-level configuration files.
Document the whole situation a bit better so that it corresponds to the
implementation, and add NIX_USER_CONF_FILES that allows overriding
which user files Nix will load during startup.
Previously the memory would occasionally be collected during eval since
the GC doesn't consider the member variable as alive / doesn't scan the
region of memory where the pointer lives.
By using the traceable_allocator<T> allocator provided by Boehm GC we
can ensure the memory isn't collected. It should be properly freed when
SourceExprCommand goes out of scope.
This doesn't just cause problems for nix-store --serve but also results
in certain build failures. Builds that use unix domain sockets in their
tests often fail because the /var/folders prefix already consumes more
than half of the maximum length of socket paths.
struct sockaddr_un {
sa_family_t sun_family; /* AF_UNIX */
char sun_path[108]; /* Pathname */
};
Temporarily add user-write permission to build directory so that it
can be moved out of the sandbox to the store with a .check suffix.
This is necessary because the build directory has already had its
permissions set read-only, but write permission is required
to update the directory's parent link to move it out of the sandbox.
Updated the related --check "derivation may not be deterministic"
messages to consistently use the real store paths.
Added test for non-root sandbox nix-build --check -K to demonstrate
issue and help prevent regressions.
Future editions of flakes or the Nix language can be supported by
renaming flake.nix (e.g. flake-v2.nix). This avoids a bootstrap
problem where we don't know which grammar to use to parse
flake*.nix. It also allows a project to support multiple flake
editions, in theory.
With --check and the --keep-failed (-K) flag, the temporary directory
was being retained regardless of whether the build was successful and
reproducible. This removes the temporary directory, as expected, on
a reproducible check build.
Added tests to verify that temporary build directories are not
retained unnecessarily, particularly when using --check with
--keep-failed.
This fetchers copies a plain directory (i.e. not a Git/Mercurial
repository) to the store (or does nothing if the path is already a
store path).
One use case is to pin the 'nixpkgs' flake used to build the current
NixOS system, and prevent it from being garbage-collected, via a
system registry entry like this:
{
"from": {
"id": "nixpkgs",
"type": "indirect"
},
"to": {
"type": "path",
"path": "/nix/store/rralhl3wj4rdwzjn16g7d93mibvlr521-source",
"lastModified": 1585388205,
"rev": "b0c285807d6a9f1b7562ec417c24fa1a30ecc31a"
},
"exact": true
}
Note the fake "lastModified" and "rev" attributes that ensure that the
flake gives the same evaluation results as the corresponding
Git/GitHub inputs.
(cherry picked from commit 12f9379123)
This provides a pluggable mechanism for defining new fetchers. It adds
a builtin function 'fetchTree' that generalizes existing fetchers like
'fetchGit', 'fetchMercurial' and 'fetchTarball'. 'fetchTree' takes a
set of attributes, e.g.
fetchTree {
type = "git";
url = "https://example.org/repo.git";
ref = "some-branch";
rev = "abcdef...";
}
The existing fetchers are just wrappers around this. Note that the
input attributes to fetchTree are the same as flake input
specifications and flake lock file entries.
All fetchers share a common cache stored in
~/.cache/nix/fetcher-cache-v1.sqlite. This replaces the ad hoc caching
mechanisms in fetchGit and download.cc (e.g. ~/.cache/nix/{tarballs,git-revs*}).
This also adds support for Git worktrees (c169ea5904).
This is useful for finding out what a registry lookup resolves to, e.g
$ nix flake info patchelf
Resolved URL: github:NixOS/patchelf
Locked URL: github:NixOS/patchelf/cd7955af31698c571c30b7a0f78e59fd624d0229
When encountering an unsupported protocol, there's no need to retry.
Chances are, it won't suddenly be supported between retry attempts;
error instead. Otherwise, you see something like the following:
$ nix-env -i -f git://git@github.com/foo/bar
warning: unable to download 'git://git@github.com/foo/bar': Unsupported protocol (1); retrying in 335 ms
warning: unable to download 'git://git@github.com/foo/bar': Unsupported protocol (1); retrying in 604 ms
warning: unable to download 'git://git@github.com/foo/bar': Unsupported protocol (1); retrying in 1340 ms
warning: unable to download 'git://git@github.com/foo/bar': Unsupported protocol (1); retrying in 2685 ms
With this change, you now see:
$ nix-env -i -f git://git@github.com/foo/bar
error: unable to download 'git://git@github.com/foo/bar': Unsupported protocol (1)
When we do something like 'nix flake update --override-input nixpkgs
...', the override is now kept on subsequent calls. (If you don't want
this behaviour, you can use --no-write-lock-file.)
This fetchers copies a plain directory (i.e. not a Git/Mercurial
repository) to the store (or does nothing if the path is already a
store path).
One use case is to pin the 'nixpkgs' flake used to build the current
NixOS system, and prevent it from being garbage-collected, via a
system registry entry like this:
{
"from": {
"id": "nixpkgs",
"type": "indirect"
},
"to": {
"type": "path",
"path": "/nix/store/rralhl3wj4rdwzjn16g7d93mibvlr521-source",
"lastModified": 1585388205,
"rev": "b0c285807d6a9f1b7562ec417c24fa1a30ecc31a"
},
"exact": true
}
Note the fake "lastModified" and "rev" attributes that ensure that the
flake gives the same evaluation results as the corresponding
Git/GitHub inputs.
This allows querying the location of function arguments. E.g.
builtins.unsafeGetAttrPos "x" (builtins.functionArgs ({ x }: null))
=> { column = 57; file = "/home/infinisil/src/nix/inst/test.nix"; line = 1; }
An example use is for pinning the "nixpkgs" entry the system-wide
registry to a particular store path. Inexact matches
(e.g. "nixpkgs/master") should still use the global registry.
One application for this is pinning the 'nixpkgs' flake to the exact
revision used to build the NixOS system, e.g.
{
"flakes": [
{
"from": {
"id": "nixpkgs",
"type": "indirect"
},
"to": {
"owner": "NixOS",
"repo": "nixpkgs",
"type": "github",
"rev": "b0c285807d6a9f1b7562ec417c24fa1a30ecc31a"
}
}
],
"version": 2
}
Using std::filesystem means also having to link with -lstdc++fs on
some platforms and it's hard to discover for what platforms this is
needed. As all the functionality is already implemented as utilities,
use those instead.
Due to fetchGit not checking if rev is an ancestor of ref (there is even
a FIXME comment about it in the code), the cache repo might not have the
ref even though it has the rev. This doesn't matter when submodule =
false, but the submodule = true code blows up because it tries to fetch
the (missing) ref from the cache repo.
Fix this in the simplest way possible: fetch all refs from the local
cache repo when submodules = true.
TODO: Add tests.
The .link file is used as a lock, so I think we should put the
"submodule" attribute in there since turning on submodules creates a new
.link file path.
This is now done in a single pass. Also fixes some issues when
updating flakes with circular dependencies. Finally, when using
'--recreate-lock-file --commit-lock-file', the commit message now
correctly shows the differences.
Sadly 10.15 changed /bin/sh to a shim which executes bash, this means it
can't be used anymore without also opening up the sandbox to allow bash.
Failed to exec /bin/bash as variant for /bin/sh (1: Operation not permitted).
This is used to determine the dependency tree of impure libraries so nix
knows what paths to open in the sandbox. With the less restrictive
defaults it isn't needed anymore.
Running `nix-store --gc --delete` will, as of Nix 2.3.3, simply fail
because the --delete option conflicts with the --delete operation.
$ nix-store --gc --delete
error: only one operation may be specified
Try 'nix-store --help' for more information.
Furthermore, it has been broken since at least Nix 0.16 (which was
released sometime in 2010), which means that any scripts which depend
on it should have been broken at least nine years ago. This commit
simply formally removes the option. There should be no actual difference
in behaviour as far as the user is concerned: it errors with the exact
same error message. The manual has been edited to remove any references
to the (now gone) --delete option.
Other information:
* Path for Nix 0.16 used:
/nix/store/rp3sgmskn0p0pj1ia2qwd5al6f6pinz4-nix-0.16
See documentattion in header and comments in implementation for details.
This is actually done in preparation for floating ca derivations, not
multi-output fixed ca derivations, but the distinction doesn't yet
mattter.
Thanks @cole-h for finding and fixing a bunch of typos.
If you do a fetchTree on a Git repository, whether the result contains
a revCount attribute should not depend on whether that repository
happens to be a shallow clone or not. That would complicate caching a
lot and would be semantically messy. So applying fetchTree/fetchGit to
a shallow repository is now an error unless you pass the attribute
'shallow = true'. If 'shallow = true', we don't return revCount, even
if the repository is not actually shallow.
Note that Nix itself is not doing shallow clones at the moment. But it
could do so as an optimisation if the user specifies 'shallow = true'.
Issue #2988.
Today's fixed output derivations and regular derivations differ in a few
ways which are largely orthogonal. This replaces `isFixedOutput` with a
`type` that returns an enum of possible combinations.
In
nix-instantiate --dry-run '<nixpkgs/nixos/release-combined.nix>' -A nixos.tests.simple.x86_64-linux
this reduces time spent in unparse() from 9.15% to 4.31%. The main
culprit was appending characters one at a time to the destination
string. Even though the string has enough capacity, push_back() still
needs to check this on every call.
Note: like 'nix run', and unlike 'nix-shell', this takes an argv
vector rather than a shell command. So
nix dev-shell -c 'echo $PATH'
doesn't work. Instead you need to do
nix dev-shell -c bash -c 'echo $PATH'
The problem fixed: each nix-shell invocation creates a new temporary
directory (`/tmp/nix-shell-*`) and never cleans up.
And while I'm here, shellescape all variables inlined into the rcfile.
See what might happen without escaping:
$ export TZ="';echo pwned'"
$ nix-shell -p hello --run hello
pwned
Hello, world!
Worktrees[1] are a feature of git which allow you to check out a ref in
a different directory.
While playing around with flakes I realized that git repositories in a
worktree checkout break when trying to build a flake:
```
$ git worktree add ../nixpkgs-flakes nixpkgs-flakes
$ cd ../nixpkgs-flakes
$ nix build .#hello
error: opening directory '/home/ma27/Projects/nixpkgs-flakes/.git/refs/heads': Not a directory
```
This issue has been fixed by determining with `git rev-parse --git-common-dir`
where the actual `.git` directory is.
Please note that this issue only exists on the `flakes` branch, fetching
worktree checkouts with Nix master seems to work fine.
[1] https://git-scm.com/docs/git-worktree
The ssh client is lazily started by the first worker thread, that
requires a ssh connection. To avoid the ssh client to be killed, when
the worker process is stopped, do not set PR_SET_PDEATHSIG.
This allows all supported fetchers to be used, e.g.
builtins.fetchTree {
type = "github";
owner = "NixOS";
repo = "nix";
rev = "d4df99a3349cf2228a8ee78dea320afef86eb3ba";
}
Brings the functionality of ssh-ng:// in sync with the legacy ssh://
implementation. Specifying the remote store uri enables various useful
things. eg.
$ nix copy --to ssh-ng://cache?remote-store=file://mnt/cache --all
This improves reproducibility and may be faster than fetching from the
original source (especially for git/hg inputs, but probably also for
github inputs - our binary cache is probably faster than GitHub's
dynamically generated tarballs).
Unfortunately this doesn't work for the top-level flake since even if
we know the NAR hash of the tree, we don't know the other tree
attributes such as revCount and lastModified.
Fixes#3253.
This copies a flake and all its inputs recursively to a store (e.g. a
binary cache). This is intended to enable long-term reproducibility
for flakes. However this will also require #3253.
Example:
$ nix flake archive --json --to file:///tmp/my-cache nixops
{"path":"/nix/store/272igzkgl1gdzmabsjvb2kb2zqbphb3p-source","inputs":{"nixops-aws":{"path":"/nix/store/ybcykw13gr7iq1pzg18iyibbcv8k9q1v-source","inputs":{}},"nixops-hetzner":{"path":"/nix/store/6yn0205x3nz55w8ms3335p2841javz2d-source","inputs":{}},"nixpkgs":{"path":"/nix/store/li3lkr2ajrzphqqz3jj2avndnyd3i5lc-source","inputs":{}}}}
$ ll /tmp/my-cache
total 16
-rw-r--r-- 1 eelco users 403 Jan 30 01:01 272igzkgl1gdzmabsjvb2kb2zqbphb3p.narinfo
-rw-r--r-- 1 eelco users 403 Jan 30 01:01 6yn0205x3nz55w8ms3335p2841javz2d.narinfo
-rw-r--r-- 1 eelco users 408 Jan 30 01:01 li3lkr2ajrzphqqz3jj2avndnyd3i5lc.narinfo
drwxr-xr-x 2 eelco users 6 Jan 30 01:01 nar
-rw-r--r-- 1 eelco users 21 Jan 30 01:01 nix-cache-info
-rw-r--r-- 1 eelco users 404 Jan 30 01:01 ybcykw13gr7iq1pzg18iyibbcv8k9q1v.narinfo
Fixes#3336.
Typical usage:
$ nix flake update ~/Misc/eelco-configurations/hagbard --update-input nixpkgs
to update the 'nixpkgs' input of a flake while leaving every other
input unchanged.
The argument is an input path, so you can do e.g. '--update-input
dwarffs/nixpkgs' to update an input of an input.
Fixes#2928.
Added a flag --no-update-lock-file to barf if the lock file needs any
changes. This is useful for CI systems if you're building a
checkout. Fixes#2947.
Renamed --no-save-lock-file to --no-write-lock-file. It is now a fatal
error if the lock file needs changes but --no-write-lock-file is not
given.
E.g.
$ nix flake update ~/Misc/eelco-configurations/hagbard \
--override-input 'dwarffs/nixpkgs' ../my-nixpkgs
overrides the 'nixpkgs' input of the 'dwarffs' input of the top-level
flake.
Fixes#2837.
When computing a lock file, we now respect the lock files of flake
inputs. This is important for usability / reproducibility. For
example, the 'nixops' flake depends on the 'nixops-aws' and
'nixops-hetzner' repositories. So when the 'nixops' flake is used in
another flake, we want the versions of 'nixops-aws' and
'nixops-hetzner' locked by the the 'nixops' flake because those
presumably have been tested.
This can lead to a proliferation of versions of flakes like 'nixpkgs'
(since every flake's lock file could depend on a different version of
'nixpkgs'). This is not a major issue when using Nixpkgs overlays or
NixOS modules, since then the top-level flake composes those
overlays/modules into *its* version of Nixpkgs and all other versions
are ignored. Lock file computation has been made a bit more lazy so it
won't try to fetch all those versions of 'nixpkgs'.
However, in case it's necessary to minimize flake versions, there now
are two input attributes that allow this. First, you can copy an input
from another flake, as follows:
inputs.nixpkgs.follows = "dwarffs/nixpkgs";
This states that the calling flake's 'nixpkgs' input shall be the same
as the 'nixpkgs' input of the 'dwarffs' input.
Second, you can override inputs of inputs:
inputs.nixpkgs.url = github:edolstra/nixpkgs/<hash>;
inputs.nixops.inputs.nixpkgs.url = github:edolstra/nixpkgs/<hash>;
or equivalently, using 'follows':
inputs.nixpkgs.url = github:edolstra/nixpkgs/<hash>;
inputs.nixops.inputs.nixpkgs.follows = "nixpkgs";
This states that the 'nixpkgs' input of the 'nixops' input shall be
the same as the calling flake's 'nixpkgs' input.
Finally, at '-v' Nix now prints the changes to the lock file, e.g.
$ nix flake update ~/Misc/eelco-configurations/hagbard
inputs of flake 'git+file:///home/eelco/Misc/eelco-configurations?subdir=hagbard' changed:
updated 'nixpkgs': 'github:edolstra/nixpkgs/7845bf5f4b3013df1cf036e9c9c3a55a30331db9' -> 'github:edolstra/nixpkgs/03f3def66a104a221aac8b751eeb7075374848fd'
removed 'nixops'
removed 'nixops/nixops-aws'
removed 'nixops/nixops-hetzner'
removed 'nixops/nixpkgs'
Fixes
error: derivation '/nix/store/klivma7r7h5lndb99f7xxmlh5whyayvg-zlib-1.2.11.drv' has incorrect output '/nix/store/fv98nnx5ykgbq8sqabilkgkbc4169q05-zlib-1.2.11-dev', should be '/nix/store/adm7pilzlj3z5k249s8b4wv3scprhzi1-zlib-1.2.11-dev'
Includes the expression of the condition in the assertion message if
the assertion failed, making assertions much easier to debug. eg.
error: assertion (withPython -> (python2Packages != null)) failed at pkgs/tools/security/nmap/default.nix:11:1
As fromTOML supports \u and \U escapes, bring fromJSON on par. As JSON defaults
to UTF-8 encoding (every JSON parser must support UTF-8), this change parses the
`\u hex hex hex hex` sequence (\u followed by 4 hexadecimal digits) into an
UTF-8 representation.
Add a test to verify correct parsing, using all escape sequences from json.org.
This prevents them from being inlined. On gcc 9, this reduces the
stack size needed for
nix-instantiate '<nixpkgs>' -A texlive.combined.scheme-full --dry-run
from 12.9 MiB to 4.8 MiB.
Having a colon in the path may cause issues, and having the hash
function indicated isn't actually necessary. We now verify the path
format in the tests to prevent regressions.
Before, we would get:
[deploy@bastion:~]$ nix-store -r /nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv
these derivations will be built:
/nix/store/3ka4ihvwh6wsyhpd2qa9f59506mnxvx1-initrd-linux-4.19.88.drv
/nix/store/ssxwmll7v21did1c8j027q0m8w6pg41i-unit-prometheus-alertmanager-irc-notifier.service.drv
/nix/store/mvyvkj46ay7pp7b1znqbkck2mq98k0qd-unit-script-network-local-commands-start.drv
/nix/store/vsl1y9mz38qfk6pyirjwnfzfggz5akg6-unit-network-local-commands.service.drv
/nix/store/wi5ighfwwb83fdmav6z6n2fw6npm9ffl-unit-prometheus-hydra-exporter.service.drv
/nix/store/x0qkv535n75pbl3xn6nn1w7qkrg9wwyg-unit-prometheus-packet-sd.service.drv
/nix/store/lv491znsjxdf51xnfxh9ld7r1zg14d52-unit-script-packet-sd-env-key-pre-start.drv
/nix/store/nw4nzlca49agsajvpibx7zg5b873gk9f-unit-script-packet-sd-env-key-start.drv
/nix/store/x674wwabdwjrkhnykair4c8mpxa9532w-unit-packet-sd-env-key.service.drv
/nix/store/ywivz64ilb1ywlv652pkixw3vxzfvgv8-unit-wireguard-wg0.service.drv
/nix/store/v3b648293g3zl8pnn0m1345nvmyd8dwb-unit-script-acme-selfsigned-status.nixos.org-start.drv
/nix/store/zci5d3zvr6fgdicz6k7jjka6lmx0v3g4-unit-acme-selfsigned-status.nixos.org.service.drv
/nix/store/f6pwvnm63d0kw5df0v7sipd1rkhqxk5g-system-units.drv
/nix/store/iax8071knxk9c7krpm9jqg0lcrawf4lc-etc.drv
/nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv
error: invalid file name 'closure-init-0' in 'exportReferencesGraph'
This was tough to debug, I didn't figure out which one was broken until I did:
nix-store -r /nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv 2>&1 | grep nix/store | xargs -n1 nix-store -r
and then looking at the remaining build graph:
$ nix-store -r /nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv
these derivations will be built:
/nix/store/3ka4ihvwh6wsyhpd2qa9f59506mnxvx1-initrd-linux-4.19.88.drv
/nix/store/grfnl76cahwls0igd2by2pqv0dimi8h2-nixos-system-eris-19.09.20191213.03f3def.drv
error: invalid file name 'closure-init-0' in 'exportReferencesGraph'
and knowing the initrd build is before the system, then:
$ nix show-derivation /nix/store/3ka4ihvwh6wsyhpd2qa9f59506mnxvx1-initrd-linux-4.19.88.drv
{
"/nix/store/3ka4ihvwh6wsyhpd2qa9f59506mnxvx1-initrd-linux-4.19.88.drv": {
[...]
"exportReferencesGraph": "closure-init-0 /nix/store/...-stage-1-init.sh closure-mdadm.conf-1 /nix/store/...-mdadm.conf closure-ubuntu.conf-2 ...",
[...]
}
}
I then searched the repo for "in 'exportReferencesGraph'", found this
recently updated regex, and realized it was missing a "-".
Before:
$ nix-channel --update
unpacking channels...
warning: SQLite database '/nix/var/nix/db/db.sqlite' is busy (SQLITE_PROTOCOL)
warning: SQLite database '/nix/var/nix/db/db.sqlite' is busy (SQLITE_PROTOCOL)
warning: SQLite database '/nix/var/nix/db/db.sqlite' is busy (SQLITE_PROTOCOL)
warning: SQLite database '/nix/var/nix/db/db.sqlite' is busy (SQLITE_PROTOCOL)
warning: SQLite database '/nix/var/nix/db/db.sqlite' is busy (SQLITE_PROTOCOL)
After:
$ inst/bin/nix-channel --update
unpacking channels...
created 1 symlinks in user environment
I've seen complaints that "sandbox" caused problems under WSL but I'm
having no problems. I think recent changes could have fixed the issue.
This allows overriding the priority of substituters, e.g.
$ nix-store --store ~/my-nix/ -r /nix/store/df3m4da96d84ljzxx4mygfshm1p0r2n3-geeqie-1.4 \
--substituters 'http://cache.nixos.org?priority=100 daemon?priority=10'
Fixes#3264.
There is no termination condition for evaluation of cyclical
expression paths which can lead to infinite loops. This addresses
one spot in the parser in a similar fashion as utils.cc/canonPath
does.
This issue can be reproduced by something like:
```
ln -s a b
ln -s b a
nix-instantiate -E 'import ./a'
```
If the `throw` is reached, this means that execvp into `ssh` wasn’t
successful. We can hint at a usual problem, which is a missing `ssh`
executable.
Test with:
```
env PATH= ./result/bin/nix-copy-closure --builders '' unusedhost
```
and the bash version with
```
env PATH= ./result/bin/nix-copy-closure --builders '' localhost
```
Most functions now take a StorePath argument rather than a Path (which
is just an alias for std::string). The StorePath constructor ensures
that the path is syntactically correct (i.e. it looks like
<store-dir>/<base32-hash>-<name>). Similarly, functions like
buildPaths() now take a StorePathWithOutputs, rather than abusing Path
by adding a '!<outputs>' suffix.
Note that the StorePath type is implemented in Rust. This involves
some hackery to allow Rust values to be used directly in C++, via a
helper type whose destructor calls the Rust type's drop()
function. The main issue is the dynamic nature of C++ move semantics:
after we have moved a Rust value, we should not call the drop function
on the original value. So when we move a value, we set the original
value to bitwise zero, and the destructor only calls drop() if the
value is not bitwise zero. This should be sufficient for most types.
Also lots of minor cleanups to the C++ API to make it more modern
(e.g. using std::optional and std::string_view in some places).
The FunctionCallTrace object consumes a few hundred bytes of stack
space, even when tracing is disabled. This was causing stack overflows:
$ nix-instantiate '<nixpkgs> -A texlive.combined.scheme-full --dry-run
error: stack overflow (possible infinite recursion)
This is with the default stack size of 8 MiB.
Putting the object on the heap reduces stack usage to < 5 MiB.
https://hydra.nixos.org/build/107467517
Seems that on i686-linux, gcc and rustc disagree on how to return
1-word structs: gcc has the caller pass a pointer to the result, while
rustc has the callee return the result in a register. Work around this
by using a bare pointer.
This replaces the '(...)' installable syntax, which is not very
discoverable. The downside is that you can't have multiple expressions
or mix expressions and other installables.
Also, fetchGit now runs in O(1) memory since we pipe the output of
'git archive' directly into unpackTarball() (rather than first reading
it all into memory).
We can now convert Rust Errors to C++ exceptions. At the Rust->C++ FFI
boundary, Result<T, Error> will cause Error to be converted to and
thrown as a C++ exception.
E.g.
$ nix-build '<nixpkgs>' -A hello --experimental-features no-url-literals
error: URL literals are disabled, at /nix/store/vsjamkzh15r3c779q2711az826hqgvzr-nixpkgs-20.03pre194957.bef773ed53f/nixpkgs/pkgs/top-level/all-packages.nix:1236:11
Helps with implementing https://github.com/NixOS/rfcs/pull/45.
A corrupt entry in .links prevents adding a fixed version of that file
to the store in any path. The user experience is that corruption
present in the store 'spreads' to new paths added to the store:
(With store optimisation enabled)
1. A file in the store gets corrupted somehow (eg: filesystem bug).
2. The user tries to add a thing to the store which contains a good copy
of the corrupted file.
3. The file being added to the store is hashed, found to match the bad
.links entry, and is replaced by a link to the bad .links entry.
(The .links entry's hash is not verified during add -- this would
impose a substantial performance burden.)
4. The user observes that the thing in the store that is supposed to be
a copy of what they were trying to add is not a correct copy -- some
files have different contents! Running "nix-store --verify
--check-contents --repair" does not fix the problem.
This change makes "nix-store --verify --check-contents --repair" fix
this problem. Bad .links entries are simply removed, allowing future
attempts to insert a good copy of the file to succeed.
This doesn't work anymore since `packages` was removed from the
`nixpkgs`-fork with flake support[1], now it's only possible to refer to
pkgs via `legacyPackages`.
[1] 49c9b71e4c
The store path is not enough. For example, when we build a dirty tree,
commit, and build the clean tree, a re-evaluation is necessary because
the flake may depend on the lastModified or revCount attributes.
Derivations that want to use recursion should now set
requiredSystemFeatures = [ "recursive-nix" ];
to make the daemon socket appear.
Also, Nix should be configured with "experimental-features =
recursive-nix".
This allows Nix builders to call Nix to build derivations, with some
limitations.
Example:
let nixpkgs = fetchTarball channel:nixos-18.03; in
with import <nixpkgs> {};
runCommand "foo"
{
buildInputs = [ nix jq ];
NIX_PATH = "nixpkgs=${nixpkgs}";
}
''
hello=$(nix-build -E '(import <nixpkgs> {}).hello.overrideDerivation (args: { name = "hello-3.5"; })')
$hello/bin/hello
mkdir -p $out/bin
ln -s $hello/bin/hello $out/bin/hello
nix path-info -r --json $hello | jq .
''
This derivation makes a recursive Nix call to build GNU Hello and
symlinks it from its $out, i.e.
# ll ./result/bin/
lrwxrwxrwx 1 root root 63 Jan 1 1970 hello -> /nix/store/s0awxrs71gickhaqdwxl506hzccb30y5-hello-3.5/bin/hello
# nix-store -qR ./result
/nix/store/hwwqshlmazzjzj7yhrkyjydxamvvkfd3-glibc-2.26-131
/nix/store/s0awxrs71gickhaqdwxl506hzccb30y5-hello-3.5
/nix/store/sgmvvyw8vhfqdqb619bxkcpfn9lvd8ss-foo
This is implemented as follows:
* Before running the outer builder, Nix creates a Unix domain socket
'.nix-socket' in the builder's temporary directory and sets
$NIX_REMOTE to point to it. It starts a thread to process
connections to this socket. (Thus you don't need to have nix-daemon
running.)
* The daemon thread uses a wrapper store (RestrictedStore) to keep
track of paths added through recursive Nix calls, to implement some
restrictions (see below), and to do some censorship (e.g. for
purity, queryPathInfo() won't return impure information such as
signatures and timestamps).
* After the build finishes, the output paths are scanned for
references to the paths added through recursive Nix calls (in
addition to the inputs closure). Thus, in the example above, $out
has a reference to $hello.
The main restriction on recursive Nix calls is that they cannot do
arbitrary substitutions. For example, doing
nix-store -r /nix/store/kmwd1hq55akdb9sc7l3finr175dajlby-hello-2.10
is forbidden unless /nix/store/kmwd... is in the inputs closure or
previously built by a recursive Nix call. This is to prevent
irreproducible derivations that have hidden dependencies on
substituters or the current store contents. Building a derivation is
fine, however, and Nix will use substitutes if available. In other
words, the builder has to present proof that it knows how to build a
desired store path from scratch by constructing a derivation graph for
that path.
Probably we should also disallow instantiating/building fixed-output
derivations (specifically, those that access the network, but
currently we have no way to mark fixed-output derivations that don't
access the network). Otherwise sandboxed derivations can bypass
sandbox restrictions and access the network.
When sandboxing is enabled, we make paths appear in the sandbox of the
builder by entering the mount namespace of the builder and
bind-mounting each path. This is tricky because we do a pivot_root()
in the builder to change the root directory of its mount namespace,
and thus the host /nix/store is not visible in the mount namespace of
the builder. To get around this, just before doing pivot_root(), we
branch a second mount namespace that shares its /nix/store mountpoint
with the parent.
Recursive Nix currently doesn't work on macOS in sandboxed mode
(because we can't change the sandbox policy of a running build) and in
non-root mode (because setns() barfs).
The intent of the code was that if the window size cannot be determined,
it would be treated as having the maximum possible size. Because of a
missing assignment, it was actually treated as having a width of 0.
The reason the width could not be determined was because it was obtained
from stdout, not stderr, even though the printing was done to stderr.
This commit addresses both issues.
Add missing docstring on InstallableCommand. Also, some of these were wrapped
when they're right next to a line longer than the unwrapped line, so we can just
unwrap them to save vertical space.
Fixes the following warning and the indicate potential issue:
src/libstore/worker-protocol.hh:66:1: warning: class 'Source' was previously declared as a struct; this is valid, but may result in linker errors
under the Microsoft C++ ABI [-Wmismatched-tags]
(cherry picked from commit 6e1bb04870b1b723282d32182af286646f13bf3c)
git show seems to print the entire tag message when being called on a tag
instead of a commit. git log instead always prints the correct timestamp
in my tests.
The error nix prints is: `error: stoull`.
This is an alternative to the IN_NIX_SHELL environment variable,
allowing the expression to adapt itself to nix-shell without
triggering those adaptations when used as a dependency of another
shell.
Closes#3147
This allows to have a repl-centric workflow to working on nixpkgs.
Usage:
:edit <package> - heuristic that find the package file path
:edit <path> - just open the editor on the file path
Once invoked, `nix repl` will open $EDITOR on that file path. Once the
editor exits, `nix repl` will automatically reload itself.
This adds a command 'nix make-content-addressable' that rewrites the
specified store paths into content-addressable paths. The advantage of
such paths is that 1) they can be imported without signatures; 2) they
can enable deduplication in cases where derivation changes do not
cause output changes (apart from store path hashes).
For example,
$ nix make-content-addressable -r nixpkgs.cowsay
rewrote '/nix/store/g1g31ah55xdia1jdqabv1imf6mcw0nb1-glibc-2.25-49' to '/nix/store/48jfj7bg78a8n4f2nhg269rgw1936vj4-glibc-2.25-49'
...
rewrote '/nix/store/qbi6rzpk0bxjw8lw6azn2mc7ynnn455q-cowsay-3.03+dfsg1-16' to '/nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16'
We can then copy the resulting closure to another store without
signatures:
$ nix copy --trusted-public-keys '' ---to ~/my-nix /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16
In order to support self-references in content-addressable paths,
these paths are hashed "modulo" self-references, meaning that
self-references are zeroed out during hashing. Somewhat annoyingly,
this means that the NAR hash stored in the Nix database is no longer
necessarily equal to the output of "nix hash-path"; for
content-addressable paths, you need to pass the --modulo flag:
$ nix path-info --json /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16 | jq -r .[].narHash
sha256:0ri611gdilz2c9rsibqhsipbfs9vwcqvs811a52i2bnkhv7w9mgw
$ nix hash-path --type sha256 --base32 /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16
1ggznh07khq0hz6id09pqws3a8q9pn03ya3c03nwck1kwq8rclzs
$ nix hash-path --type sha256 --base32 /nix/store/iq6g2x4q62xp7y7493bibx0qn5w7xz67-cowsay-3.03+dfsg1-16 --modulo iq6g2x4q62xp7y7493bibx0qn5w7xz67
0ri611gdilz2c9rsibqhsipbfs9vwcqvs811a52i2bnkhv7w9mgw
Fixes
error: the content hash of flake '/home/eelco/Dev/nixpkgs-flake?ref=HEAD&rev=0000000000000000000000000000000000000000' doesn't match the hash recorded in the referring lockfile
Experimental features are now opt-in. There is currently one
experimental feature: "nix-command" (which enables the "nix"
command. This will allow us to merge experimental features more
quickly, without committing to supporting them indefinitely.
Typical usage:
$ nix build --experimental-features 'nix-command flakes' nixpkgs#hello
(cherry picked from commit 8e478c2341,
without the "flakes" feature)
Experimental features are now opt-in. There are currently two
experimental features: "nix-command" (which enables the "nix"
command), and "flakes" (which enables support for flakes). This will
allow us to merge experimental features more quickly, without
committing to supporting them indefinitely.
Typical usage:
$ nix build --experimental-features 'nix-command flakes' nixpkgs#hello
In particular, when building a flake lock file, inputs like 'nixpkgs'
are now downloaded only once. Previously, it would fetch
https://api.github.com/repos/<owner>/<repo>/tarball/<ref> and then
later https://api.github.com/repos/<owner>/<repo>/tarball/<rev>, even
though they produce the same result.
Git and GitHub now also share a cache that maps revs to a store path
and other info.
A command like
$ nix run nixpkgs#hello
will now build the attribute 'packages.${system}.hello' rather than
'packages.hello'. Note that this does mean that the flake needs to
export an attribute for every system type it supports, and you can't
build on unsupported systems. So 'packages' typically looks like this:
packages = nixpkgs.lib.genAttrs ["x86_64-linux" "i686-linux"] (system: {
hello = ...;
});
The 'checks', 'defaultPackage', 'devShell', 'apps' and 'defaultApp'
outputs similarly are now attrsets that map system types to
derivations/apps. 'nix flake check' checks that the derivations for
all platforms evaluate correctly, but only builds the derivations in
'checks.${system}'.
Fixes#2861. (That issue also talks about access to ~/.config/nixpkgs
and --arg, but I think it's reasonable to say that flakes shouldn't
support those.)
The alternative to attribute selection is to pass the system type as
an argument to the flake's 'outputs' function, e.g. 'outputs = { self,
nixpkgs, system }: ...'. However, that approach would be at odds with
hermetic evaluation and make it impossible to enumerate the packages
provided by a flake.
The tmpDirInSandbox is different when in sandboxed vs. non-sandboxed.
Since we don’t know ahead of time here whether sandboxing is enabled,
we need to reset all of the env vars we’ve set previously. This fixes
the issue encountered in https://github.com/NixOS/nixpkgs/issues/70856.
Previously, SANDBOX_SHELL was set to empty when unavailable. This
caused issues when actually generating the sandbox. Instead, just set
SANDBOX_SHELL when --with-sandbox-shell= is non-empty. Alternative
implementation to https://github.com/NixOS/nix/pull/3038.
Pure mode should not try to source the user’s bashrc file. These may
have many impurities that the user does not expect to get into their
shell.
Fixes#3090
Fixes
$ nix build
fatal: bad revision 'HEAD'
error: program 'git' failed with exit code 128
on a new flake. It is now detected as a dirty tree with revCount = 0.
When running nix doctor on a healthy system, it just prints the store URI and
nothing else. This makes it unclear whether the system is in a good state and
what check(s) it actually ran, since some of the checks are optional depending
on the store type.
This commit updates nix doctor to print an colored log message for every check
that it does, and explicitly state whether that check was a PASS or FAIL to make
it clear to the user whether the system passed its checkup with the doctor.
Fixes#3084
Only variables that were marked as exported are exported in the dev
shell. Also, we no longer try to parse the function section of the env
file, fixing
$ nix dev-shell
error: shell environment '/nix/store/h7ama3kahb8lypf4nvjx34z06g9ncw4h-nixops-1.7pre20190926.4c7acbb-env' has unexpected line '/^[a-z]?"""/ {'
For example, if the top-level flake depends on
"nixpkgs/release-19.03", and one of its dependencies depends on
"nixpkgs", then the latter will be mapped to "nixpkgs/release-19.03",
rather than whatever the default branch of "nixpkgs" is. Thus you get
only one "nixpkgs" dependency rather than two.
This currently only works in a breadth-first way, so the other way
around (i.e. if the top-level flake depends on "nixpkgs", and a
dependency depends on "nixpkgs/release-19.03") still results in two
"nixpkgs" dependencies.
If 'input.<name>.uri' changes, then the entry in the lockfile for
input <name> should be considered stale.
Also print some messages when lock file entries are added/updated.
This integrates the functionality of the index-debuginfo program in
nixos-channel-scripts to maintain an index of DWARF debuginfo files in
a format usable by dwarffs. Thus the debug info index is updated by
Hydra rather than by the channel mirroring script.
Example usage:
$ nix copy --to 'file:///tmp/binary-cache?index-debug-info=true' /nix/store/vr9mhcch3fljzzkjld3kvkggvpq38cva-nix-2.2.2-debug
$ cat /tmp/binary-cache/debuginfo/036b210b03bad75ab2d8fc80b7a146f98e7f1ecf.debug
{"archive":"../nar/0313h2kdhk4v73xna9ysiksp2v8xrsk5xsw79mmwr3rg7byb4ka8.nar.xz","member":"lib/debug/.build-id/03/6b210b03bad75ab2d8fc80b7a146f98e7f1ecf.debug"}
Fixes#3083.
So you now get
$ nix build
error: path '.' is not a flake (because it does not reference a Git repository)
rather than
$ nix build
error: unsupported argument '.'
Instead of a list, inputs are now an attrset like
inputs = {
nixpkgs.uri = github:NixOS/nixpkgs;
};
If 'uri' is omitted, than the flake is a lookup in the flake registry, e.g.
inputs = {
nixpkgs = {};
};
but in that case, you can also just omit the input altogether and
specify it as an argument to the 'outputs' function, as in
outputs = { self, nixpkgs }: ...
This also gets rid of 'nonFlakeInputs', which are now just a special
kind of input that have a 'flake = false' attribute, e.g.
inputs = {
someRepo = {
uri = github:example/repo;
flake = false;
};
};
Previously we allowed any length of name for Nix derivations. This is
bad because different file systems have different max lengths. To make
things predictable, I have picked a max. This was done by trying to
build this derivation:
derivation {
name = "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa";
builder = "/no-such-path";
system = "x86_64-linux";
}
Take off one a and it will not lead to file name too long. That ends
up being 212 a’s. An even smaller max could be picked if we want to
support more file systems.
Working backwards, this is why:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa-${name}.drv.chroot
> 255 - 32 - 1 - 4 - 7 = 211
These are already handled separately. This fixes warnings like
warning: ignoring the user-specified setting 'max-jobs', because it is a restricted setting and you are not a trusted user
when using the -j flag.
If a NAR is already in the store, addToStore doesn't read the source
which makes the protocol go out of sync. This happens for example when
two client try to nix-copy-closure the same derivation at the same time.
Introduce the SizeSource which allows to bound how much data is being
read from a source. It also contains a drainAll() function to discard
the rest of the source, useful to keep the nix protocol in sync.
With this patch, and this file I called `log.py`:
#!/usr/bin/env nix-shell
#!nix-shell -i python3 -p python3 --pure
import sys
from pprint import pprint
stack = []
timestack = []
for line in open(sys.argv[1]):
components = line.strip().split(" ", 2)
if components[0] != "function-trace":
continue
direction = components[1]
components = components[2].rsplit(" ", 2)
loc = components[0]
_at = components[1]
time = int(components[2])
if direction == "entered":
stack.append(loc)
timestack.append(time)
elif direction == "exited":
dur = time - timestack.pop()
vst = ";".join(stack)
print(f"{vst} {dur}")
stack.pop()
and:
nix-instantiate --trace-function-calls -vvvv ../nixpkgs/pkgs/top-level/release.nix -A unstable > log.matthewbauer 2>&1
./log.py ./log.matthewbauer > log.matthewbauer.folded
flamegraph.pl --title matthewbauer-post-pr log.matthewbauer.folded > log.matthewbauer.folded.svg
I can make flame graphs like: http://gsc.io/log.matthewbauer.folded.svg
---
Includes test cases around function call failures and tryEval. Uses
RAII so the finish is always called at the end of the function.
Make curl's low speed limit configurable via stalled-download-timeout.
Before, this limit was five minutes without receiving a single byte.
This is much too long as if the remote end may not have even
acknowledged the HTTP request.
POSIX file locks are essentially incompatible with multithreading. BSD
locks have much saner semantics. We need this now that there can be
multiple concurrent LocalStore::buildPaths() invocations.
This currently fails because we're using POSIX file locks. So when the
garbage collector opens and closes its own temproots file, it causes
the lock to be released and then deleted by another GC instance.
Passing `--post-build-hook /foo/bar` to a nix-* command will cause
`/foo/bar` to be executed after each build with the following
environment variables set:
DRV_PATH=/nix/store/drv-that-has-been-built.drv
OUT_PATHS=/nix/store/...build /nix/store/...build-bin /nix/store/...build-dev
This can be useful in particular to upload all the builded artifacts to
the cache (including the ones that don't appear in the runtime closure
of the final derivation or are built because of IFD).
This new feature prints the stderr/stdout output to the `nix-build`
and `nix build` client, and the output is printed in a Nix 2
compatible format:
[nix]$ ./inst/bin/nix-build ./test.nix
these derivations will be built:
/nix/store/ishzj9ni17xq4hgrjvlyjkfvm00b0ch9-my-example-derivation.drv
building '/nix/store/ishzj9ni17xq4hgrjvlyjkfvm00b0ch9-my-example-derivation.drv'...
hello!
bye!
running post-build-hook '/home/grahamc/projects/github.com/NixOS/nix/post-hook.sh'...
post-build-hook: + sleep 1
post-build-hook: + echo 'Signing paths' /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: Signing paths /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: + sleep 1
post-build-hook: + echo 'Uploading paths' /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: Uploading paths /nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
post-build-hook: + sleep 1
post-build-hook: + printf 'very important stuff'
/nix/store/qr213vjmibrqwnyp5fw678y7whbkqyny-my-example-derivation
[nix-shell:~/projects/github.com/NixOS/nix]$ ./inst/bin/nix build -L -f ./test.nix
my-example-derivation> hello!
my-example-derivation> bye!
my-example-derivation (post)> + sleep 1
my-example-derivation (post)> + echo 'Signing paths' /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> Signing paths /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> + sleep 1
my-example-derivation (post)> + echo 'Uploading paths' /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> Uploading paths /nix/store/c263gzj2kb2609mz8wrbmh53l14wzmfs-my-example-derivation
my-example-derivation (post)> + sleep 1
my-example-derivation (post)> + printf 'very important stuff'
[1 built, 0.0 MiB DL]
Co-authored-by: Graham Christensen <graham@grahamc.com>
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
startProcess does not appear to send the exit code to the helper
correctly. Not sure why this is, but it is probably safe to just
fallback on all sandbox errors.
This ensures that stdenv / setup hooks take $IN_NIX_SHELL into
account. For example, stdenv only sets
NIX_SSL_CERT_FILE=/no-cert-file.crt if we're not in a shell.
When sandbox-fallback = true (the default), the Nix builder will fall
back to disabled sandbox mode when the kernel doesn’t allow users to
set it up. This prevents hard errors from occuring in tricky places,
especially the initial installer. To restore the previous behavior,
users can set:
sandbox-fallback = false
in their /etc/nix/nix.conf configuration.
Some kernels disable "unpriveleged user namespaces". This is
unfortunate, but we can still use mount namespaces. Anyway, since each
builder has its own nixbld user, we already have most of the benefits
of user namespaces.
This replaces 'nix-env --set'. For example:
$ nix build --profile /nix/var/nix/profiles/system \
~/Misc/eelco-configurations:nixosConfigurations.vyr.config.system.build.toplevel
updates the NixOS system profile from a flake.
This could have been a separate command (e.g. 'nix set-profile') but
1) '--profile' is pretty similar to '--out-link'; and 2) '--profile'
could be useful for other command (like 'nix dev-shell').
This is a much simpler fix to the 'error 9 while decompressing xz
file' problem than 78fa47a7f0. We just
do a ranged HTTP request starting after the data that we previously
wrote into the sink.
Fixes#2952, #379.
Our use of boost::coroutine2 depends on -lboost_context,
which in turn depends on `-lboost_thread`, which in turn depends
on `-lboost_system`.
I suspect that this builds on nix only because of low-level hacks
like NIX_LDFLAGS.
This commit passes the proper linker flags, thus fixing bootstrap
builds on non-nix distributions like Ubuntu 16.04.
With these changes, I can build Nix on Ubuntu 16.04 using:
./bootstrap.sh
./configure --prefix=$HOME/editline-prefix \
--disable-doc-gen \
CXX=g++-7 \
--with-boost=$HOME/boost-prefix \
EDITLINE_CFLAGS=-I$HOME/editline-prefix/include \
EDITLINE_LIBS=-leditline \
LDFLAGS=-L$HOME/editline-prefix/lib
make
where
* g++-7 comes from gcc-7 from
https://launchpad.net/~ubuntu-toolchain-r/+archive/ubuntu/test,
* editline 1.14 from https://github.com/troglobit/editline/releases/tag/1.14.0
was installed into `$HOME/editline-prefix`
(because Ubuntu 16.04's `editline` is too old to have the function nix uses),
* boost 1.66 from
https://www.boost.org/doc/libs/1_66_0/more/getting_started/unix-variants.html
was installed into $HOME/boost-prefix (because Ubuntu 16.04 only has 1.58)
$ sudo ./inst/bin/nix-instantiate -E '"${./.git}"'
error: The path name '.git' is invalid: it is illegal to start the
name with a period. Path names are alphanumeric and can include the
symbols +-._?= and must not begin with a period. Note: If '.git' is a
source file and you cannot rename it on disk,
builtins.path { name = ... } can be used to give it an alternative
name.
If multiple builds with fail with different errors it will be reflected
in the status code.
eg.
103 => timeout + hash mismatch
105 => timeout + check mismatch
106 => hash mismatch + check mismatch
107 => timeout + hash mismatch + check mismatch
Setting `http2 = false` in nix config (e.g. /etc/nix/nix.conf)
had no effect, and `nix-env -vvvvv -i hello` still downloaded .nar
packages using HTTP/2.
In `src/libstore/download.cc`, the `CURL_HTTP_VERSION_2TLS` option was
being explicitly set when `downloadSettings.enableHttp2` was `true`,
but, `CURL_HTTP_VERSION_1_1` option was not being explicitly set when
`downloadSettings.enableHttp2` was `false`.
This may be because `https://curl.haxx.se/libcurl/c/libcurl-env.html` states:
"You have to set this option if you want to use libcurl's HTTP/2 support."
but, also, in the changelog, states:
"DEFAULT
Since curl 7.62.0: CURL_HTTP_VERSION_2TLS
Before that: CURL_HTTP_VERSION_1_1"
So, the default setting for `libcurl` is HTTP/2 for version >= 7.62.0.
In this commit, option `CURLOPT_HTTP_VERSION` is explicitly set to
`CURL_HTTP_VERSION_1_1` when `downloadSettings.enableHttp2` nix config
setting is `false`.
This can be tested by running `nix-env -vvvvv -i hello | grep HTTP`
The default nsswitch.conf(5) file in most distros can handle many
different things including host name, user names, groups, etc. In Nix,
we want to limit the amount of impurities that come from these things.
As a result, we should only allow nss to be used for gethostbyname(3)
and getservent(3).
/cc @Ericson2314
'updateCV.notify_one()' does nothing if the update thread is not
waiting for updateCV (in particular this happens when it is sleeping
on quitCV). So also set a variable to ensure that the update isn't
lost.
--no-net causes tarballTtl to be set to the largest 32-bit integer,
which causes comparison like 'time + tarballTtl < other_time' to
fail on 32-bit systems. So cast them to 64-bit first.
https://hydra.nixos.org/build/95076624
(cherry picked from commit 29ccb2e969)
This flag
* Disables substituters.
* Sets the tarball-ttl to infinity (ensuring e.g. that the flake
registry and any downloaded flakes are considered current).
* Disables retrying downloads and sets the connection timeout to the
minimum. (So it doesn't completely disable downloads at the moment.)
(cherry picked from commit 8ea842260b)
Once we've started writing data to a Sink, we can't restart a download
request, because then we end up writing duplicate data to the
Sink. Therefore we shouldn't handle retries in Downloader but at a
higher level (in particular, in copyStorePath()).
Fixes#2952.
(cherry picked from commit a67cf5a358)
Also, make fetchGit and fetchMercurial update allowedPaths properly.
(Maybe the evaluator, rather than the caller of the evaluator, should
apply toRealPath(), but that's a bigger change.)
(cherry picked from commit 5c34d66538)
Once we've started writing data to a Sink, we can't restart a download
request, because then we end up writing duplicate data to the
Sink. Therefore we shouldn't handle retries in Downloader but at a
higher level (in particular, in copyStorePath()).
Fixes#2952.
