Caches tree in addition to lockedRef, and explicitly writes out the logic for different combinations of cached/uncached flakes and indirect/resolved/locked flakes. This eliminates uneccessary calls to lookupInFlakeCache, fetchTree, maybeLookupFlake, and flakeCache.push_back
As `git fetch` may chose to interpret refspec to it's liking, ensure that we
only pass refs that begin with `refs/` as is, otherwise, prepend them with
`refs/heads`. Otherwise, branches named `heads/foo` (I know it's bad, but it's
allowed), would be fetched as `foo`, instead of `heads/foo`.
The previous regex was too strict and did not match what git was allowing. It
could lead to `fetchGit` not accepting valid branch names, even though they
exist in a repository (for example, branch names containing `/`, which are
pretty standard, like `release/1.0` branches).
The new regex defines what a branch name should **NOT** contain. It takes the
definitions from `refs.c` in https://github.com/git/git and `git help
check-ref-format` pages.
This change also introduces a test for ref name validity checking, which
compares the result from Nix with the result of `git check-ref-format --branch`.
The attributes previously stored in TreeInfo (narHash, revCount,
lastModified) are now stored in Input. This makes it less arbitrary
what attributes are stored where.
As a result, the lock file format has changed. An entry like
"info": {
"lastModified": 1585405475,
"narHash": "sha256-bESW0n4KgPmZ0luxvwJ+UyATrC6iIltVCsGdLiphVeE="
},
"locked": {
"owner": "NixOS",
"repo": "nixpkgs",
"rev": "b88ff468e9850410070d4e0ccd68c7011f15b2be",
"type": "github"
},
is now stored as
"locked": {
"owner": "NixOS",
"repo": "nixpkgs",
"rev": "b88ff468e9850410070d4e0ccd68c7011f15b2be",
"type": "github",
"lastModified": 1585405475,
"narHash": "sha256-bESW0n4KgPmZ0luxvwJ+UyATrC6iIltVCsGdLiphVeE="
},
The 'Input' class is now a dumb set of attributes. All the fetcher
implementations subclass InputScheme, not Input. This simplifies the
API.
Also, fix substitution of flake inputs. This was broken since lazy
flake fetching started using fetchTree internally.
The idea is it's always more flexible to consumer a `Source` than a
plain string, and it might even reduce memory consumption.
I also looked at `addToStoreFromDump` with its `// FIXME: remove?`, but
the worked needed for that is far more up for interpretation, so I
punted for now.
This moves the actual parsing of configuration contents into applyConfig
which applyConfigFile is then going to call. By changing this we can now
test the configuration file parsing without actually create a file on
disk.
This makes 'nix flake' less cluttered and more consistent (it's only
subcommands that operator on a flake). Also, the registry is not
inherently flake-related (e.g. fetchTree could also use it to remap
inputs).
This completes flakerefs using the registry (e.g. 'nix<TAB>' => 'nix
nixpkgs') and flake output attributes by evaluating the flake
(e.g. 'dwarffs#nix<TAB>' => 'dwarffs#nixosModules').
InstallableValue has children InstallableFlake and InstallableAttrPath, but InstallableFlake was overriding toDerivations, and usage was changed so that InstallableFlake didn't need cmd. So these changes were made:
InstallableValue::toDerivations() -> InstalllableAttrPath::toDerivations()
InstallableValue::cmd -> InstallableAttrPath::cmd
InstallableValue uses state instead of cmd
toBuildables() and toDerivations() were made abstract
- result list will be always empty if --json is passed
- for scripts an empty search result is not really an error,
we rather want to distinguish between evaluation errors and empty results
The raw stderr output isn't logged anymore so the build logs need to be
printed by the default logger in order for the old commands like
nix-build to still show build output.
For remote stores the log messages are already forwarded as structured
STDERR_RESULT messages so the old format is duplicate information. But
still included with -vvv since it could be useful for debugging
problems.
$ nix build -L /nix/store/nl71b2niws857ffiaggyrkjwgx9jjzc0-foo.drv --store ssh-ng://localhost
Hello World!
foo> Hello World!
[1/0/1 built] building foo
Fixes#3556
When used with `readFile`, we have a pretty good heuristic of the file
size, so `reserve` this in the `string`. This will save some allocation
/ copy when the string is growing.
This means you now get an error message *before* stuff gets built:
$ nix copy .#hydraJobs.vendoredCrates
error: you must pass '--from' and/or '--to'
Try 'nix --help' for more information.
The commit 3cc1125595 adds a `grantpt`
call on the builder pseudo terminal fd. This call is actually only
required for MacOS, but it however requires a RW access to /dev/pts
which is only RO bindmounted in the Bazel Linux sandbox. So, Nix can
not be actually run in the Bazel Linux sandbox for unneeded reasons.
This closes#3026 by allowing `builtins.readFile` to read a file with a
wrongly reported file size, for example, files in `/proc` may report a
file size of 0. Reading file in `/proc` is not a good enough motivation,
however I do think it just makes nix more robust by allowing more file
to be read. Especially, I do considerer the previous behavior to be
dangerous because nix was previously reading truncated files. Examples
of file system which incorrectly report file size may be network file
system or dynamic file system (for performance reason, a dynamic file
system such as FUSE may generate the content of the file on demand).
```
nix-repl> builtins.readFile "/proc/version"
""
```
With this commit:
```
nix-repl> builtins.readFile "/proc/version"
"Linux version 5.6.7 (nixbld@localhost) (gcc version 9.3.0 (GCC)) #1-NixOS SMP Thu Apr 23 08:38:27 UTC 2020\n"
```
Here is a summary of the behavior changes:
- If the reported size is smaller, previous implementation
was silently returning a truncated file content. The new implementation
is returning the correct file content.
- If a file had a bigger reported file size, previous implementation was
failing with an exception, but the new implementation is returning the
correct file content. This change of behavior is coherent with this pull
request.
Open questions
- The behavior is unchanged for correctly reported file size, however
performances may vary because it uses the more complex sink interface.
Considering that sink is used a lot, I don't think this impacts the
performance a lot.
- `builtins.readFile` on an infinite file, such as `/dev/random` may
fill the memory.
- it does not support adding file to store, such as `${/proc/version}`.
In particular, doing 'nix build /path/to/dir' now works if
/path/to/dir is not a Git tree (it only has to contain a flake.nix
file).
Also, 'nix flake init' no longer requires a Git tree (but it will do a
'git add flake.nix' if it's a Git tree)
Suppose I have a path /nix/store/[hash]-[name]/a/a/a/a/a/[...]/a,
long enough that everything after "/nix/store/" is longer than 4096
(MAX_PATH) bytes.
Nix will happily allow such a path to be inserted into the store,
because it doesn't look at all the nested structure. It just cares
about the /nix/store/[hash]-[name] part. But, when the path is deleted,
we encounter a problem. Nix will move the path to /nix/store/trash, but
then when it's trying to recursively delete the trash directory, it will
at some point try to unlink
/nix/store/trash/[hash]-[name]/a/a/a/a/a/[...]/a. This will fail,
because the path is too long. After this has failed, any store deletion
operation will never work again, because Nix needs to delete the trash
directory before recreating it to move new things to it. (I assume this
is because otherwise a path being deleted could already exist in the
trash, and then moving it would fail.)
This means that if I can trick somebody into just fetching a tarball
containing a path of the right length, they won't be able to delete
store paths or garbage collect ever again, until the offending path is
manually removed from /nix/store/trash. (And even fixing this manually
is quite difficult if you don't understand the issue, because the
absolute path that Nix says it failed to remove is also too long for
rm(1).)
This patch fixes the issue by making Nix's recursive delete operation
use unlinkat(2). This function takes a relative path and a directory
file descriptor. We ensure that the relative path is always just the
name of the directory entry, and therefore its length will never exceed
255 bytes. This means that it will never even come close to AX_PATH,
and Nix will therefore be able to handle removing arbitrarily deep
directory hierachies.
Since the directory file descriptor is used for recursion after being
used in readDirectory, I made a variant of readDirectory that takes an
already open directory stream, to avoid the directory being opened
multiple times. As we have seen from this issue, the less we have to
interact with paths, the better, and so it's good to reuse file
descriptors where possible.
I left _deletePath as succeeding even if the parent directory doesn't
exist, even though that feels wrong to me, because without that early
return, the linux-sandbox test failed.
Reported-by: Alyssa Ross <hi@alyssa.is>
Thanks-to: Puck Meerburg <puck@puckipedia.com>
Tested-by: Puck Meerburg <puck@puckipedia.com>
Reviewed-by: Puck Meerburg <puck@puckipedia.com>
Reduces the number of store queries it performs. Also prints a warning
if any of the selectors did not match any installed derivations.
UX Caveats:
- Will print a warning that nothing matched if a previous selector
already removed the path
- Will not do anything if no selectors were provided (no change from
before).
Fixes#3531
In particular, we store whether an attribute failed to evaluate (threw
an exception) or was an unsupported type. This is to ensure that a
repeated 'nix flake show' never has to evaluate anything, so it can
execute without fetching the flake.
With this, 'nix flake show nixpkgs/nixos-20.03 --legacy' executes in
0.6s (was 3.4s).
This speeds up the creation of the cache for the nixpkgs flake from
21.2s to 10.2s. Oddly, it also speeds up querying the cache
(i.e. running 'nix flake show nixpkgs/nixos-20.03 --legacy') from 4.2s
to 3.4s.
(For comparison, running with --no-eval-cache takes 9.5s, so the
overhead of building the SQLite cache is only 0.7s.)
In the fully cached case for the 'nixpkgs' flake, it went from 101s to
4.6s. Populating the cache went from 132s to 17.4s (which could
probably be improved further by combining INSERTs).
Usually this just writes to stdout, but for ProgressBar, we need to
clear the current line, write the line to stdout, and then redraw the
progress bar.
(cherry picked from commit 696c026006)
Usually this just writes to stdout, but for ProgressBar, we need to
clear the current line, write the line to stdout, and then redraw the
progress bar.
Motivation: maintain project-level configuration files.
Document the whole situation a bit better so that it corresponds to the
implementation, and add NIX_USER_CONF_FILES that allows overriding
which user files Nix will load during startup.
Previously the memory would occasionally be collected during eval since
the GC doesn't consider the member variable as alive / doesn't scan the
region of memory where the pointer lives.
By using the traceable_allocator<T> allocator provided by Boehm GC we
can ensure the memory isn't collected. It should be properly freed when
SourceExprCommand goes out of scope.
This doesn't just cause problems for nix-store --serve but also results
in certain build failures. Builds that use unix domain sockets in their
tests often fail because the /var/folders prefix already consumes more
than half of the maximum length of socket paths.
struct sockaddr_un {
sa_family_t sun_family; /* AF_UNIX */
char sun_path[108]; /* Pathname */
};
Temporarily add user-write permission to build directory so that it
can be moved out of the sandbox to the store with a .check suffix.
This is necessary because the build directory has already had its
permissions set read-only, but write permission is required
to update the directory's parent link to move it out of the sandbox.
Updated the related --check "derivation may not be deterministic"
messages to consistently use the real store paths.
Added test for non-root sandbox nix-build --check -K to demonstrate
issue and help prevent regressions.
Future editions of flakes or the Nix language can be supported by
renaming flake.nix (e.g. flake-v2.nix). This avoids a bootstrap
problem where we don't know which grammar to use to parse
flake*.nix. It also allows a project to support multiple flake
editions, in theory.
With --check and the --keep-failed (-K) flag, the temporary directory
was being retained regardless of whether the build was successful and
reproducible. This removes the temporary directory, as expected, on
a reproducible check build.
Added tests to verify that temporary build directories are not
retained unnecessarily, particularly when using --check with
--keep-failed.
This fetchers copies a plain directory (i.e. not a Git/Mercurial
repository) to the store (or does nothing if the path is already a
store path).
One use case is to pin the 'nixpkgs' flake used to build the current
NixOS system, and prevent it from being garbage-collected, via a
system registry entry like this:
{
"from": {
"id": "nixpkgs",
"type": "indirect"
},
"to": {
"type": "path",
"path": "/nix/store/rralhl3wj4rdwzjn16g7d93mibvlr521-source",
"lastModified": 1585388205,
"rev": "b0c285807d6a9f1b7562ec417c24fa1a30ecc31a"
},
"exact": true
}
Note the fake "lastModified" and "rev" attributes that ensure that the
flake gives the same evaluation results as the corresponding
Git/GitHub inputs.
(cherry picked from commit 12f9379123)
This provides a pluggable mechanism for defining new fetchers. It adds
a builtin function 'fetchTree' that generalizes existing fetchers like
'fetchGit', 'fetchMercurial' and 'fetchTarball'. 'fetchTree' takes a
set of attributes, e.g.
fetchTree {
type = "git";
url = "https://example.org/repo.git";
ref = "some-branch";
rev = "abcdef...";
}
The existing fetchers are just wrappers around this. Note that the
input attributes to fetchTree are the same as flake input
specifications and flake lock file entries.
All fetchers share a common cache stored in
~/.cache/nix/fetcher-cache-v1.sqlite. This replaces the ad hoc caching
mechanisms in fetchGit and download.cc (e.g. ~/.cache/nix/{tarballs,git-revs*}).
This also adds support for Git worktrees (c169ea5904).
This is useful for finding out what a registry lookup resolves to, e.g
$ nix flake info patchelf
Resolved URL: github:NixOS/patchelf
Locked URL: github:NixOS/patchelf/cd7955af31698c571c30b7a0f78e59fd624d0229
