Previously, `state.mkList()` would set the type of the value to tList
and allocate the list vector, but it would not initialize the values
in the list. This has two problems:
* If an exception occurs, the list is left in an undefined state.
* More importantly, for multithreaded evaluation, if a value
transitions from thunk to non-thunk, it should be final (i.e. other
threads should be able to access the value safely).
To address this, there now is a `ListBuilder` class (analogous to
`BindingsBuilder`) to build the list vector prior to the call to
`Value::mkList()`. Typical usage:
auto list = state.buildList(size);
for (auto & v : list)
v = ... set value ...;
vRes.mkList(list);
we now keep not a table of all positions, but a table of all origins and
their sizes. position indices are now direct pointers into the virtual
concatenation of all parsed contents. this slightly reduces memory usage
and time spent in the parser, at the cost of not being able to report
positions if the total input size exceeds 4GiB. this limit is not unique
to nix though, rustc and clang also limit their input to 4GiB (although
at least clang refuses to process inputs that are larger, we will not).
this new 4GiB limit probably will not cause any problems for quite a
while, all of nixpkgs together is less than 100MiB in size and already
needs over 700MiB of memory and multiple seconds just to parse. 4GiB
worth of input will easily take multiple minutes and over 30GiB of
memory without even evaluating anything. if problems *do* arise we can
probably recover the old table-based system by adding some tracking to
Pos::Origin (or increasing the size of PosIdx outright), but for time
being this looks like more complexity than it's worth.
since we now need to read the entire input again to determine the
line/column of a position we'll make unsafeGetAttrPos slightly lazy:
mostly the set it returns is only used to determine the file of origin
of an attribute, not its exact location. the thunks do not add
measurable runtime overhead.
notably this change is necessary to allow changing the parser since
apparently nothing supports nix's very idiosyncratic line ending choice
of "anything goes", making it very hard to calculate line/column
positions in the parser (while byte offsets are very easy).
Instead, serialize as NAR and send that over, then rehash sever side.
This is alorithmically simpler, but comes at the cost of a newer
parameter to `Store::addToStoreFromDump`.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Part of RFC 133
Extracted from our old IPFS branches.
Co-Authored-By: Matthew Bauer <mjbauer95@gmail.com>
Co-Authored-By: Carlo Nucera <carlo.nucera@protonmail.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Florian Klink <flokli@flokli.de>
Commit 83c067c0fa changed `builtins.pathExists`
to resolve symlinks before checking for existence. Consequently, if the path
refers to a symlink itself, existence of the target of the symlink (instead of
the symlink itself) was checked. Restore the previous behavior by skipping
symlink resolution in the last component.
While preparing PRs like #9753, I've had to change error messages in
dozens of code paths. It would be nice if instead of
EvalError("expected 'boolean' but found '%1%'", showType(v))
we could write
TypeError(v, "boolean")
or similar. Then, changing the error message could be a mechanical
refactor with the compiler pointing out places the constructor needs to
be changed, rather than the error-prone process of grepping through the
codebase. Structured errors would also help prevent the "same" error
from having multiple slightly different messages, and could be a first
step towards error codes / an error index.
This PR reworks the exception infrastructure in `libexpr` to
support exception types with different constructor signatures than
`BaseError`. Actually refactoring the exceptions to use structured data
will come in a future PR (this one is big enough already, as it has to
touch every exception in `libexpr`).
The core design is in `eval-error.hh`. Generally, errors like this:
state.error("'%s' is not a string", getAttrPathStr())
.debugThrow<TypeError>()
are transformed like this:
state.error<TypeError>("'%s' is not a string", getAttrPathStr())
.debugThrow()
The type annotation has moved from `ErrorBuilder::debugThrow` to
`EvalState::error`.
When returning a 0-length substring, avoid calling coerceToString,
since it returns a string_view with the string's length, which is
expensive to compute for large strings.
Also move `SourcePath` into `libutil`.
These changes allow `error.hh` and `error.cc` to access source path and
position information, which we can use to produce better error messages
(for example, we could consider omitting filenames when two or more
consecutive stack frames originate from the same file).
since `up` and `values` are both pointer-aligned the type field will
also be pointer-aligned, wasting 48 bits of space on most machines. we
can get away with removing the type field altogether by encoding some
information into the `with` expr that created the env to begin with,
reducing the GC load for the absolutely massive amount of single-entry
envs we create for lambdas. this reduces memory usage of system eval by
quite a bit (reducing heap size of our system eval from 8.4GB to 8.23GB)
and gives similar savings in eval time.
running `nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'`
before:
Time (mean ± σ): 5.576 s ± 0.003 s [User: 5.197 s, System: 0.378 s]
Range (min … max): 5.572 s … 5.581 s 10 runs
after:
Time (mean ± σ): 5.408 s ± 0.002 s [User: 5.019 s, System: 0.388 s]
Range (min … max): 5.405 s … 5.411 s 10 runs
Previously, IFDs would be built within the eval store, even though one
is typically using `--eval-store` precisely to *avoid* local builds.
Because the resulting Nix expression must be copied back to the eval
store in order to be imported, this requires the eval store to trust
the build store's signatures.
There's no good reason to deprecate it:
- For consistency reasons it should continue to exist, such that all
primitive types have a corresponding `builtins.is*` primop.
- There's no implementation cost to continuing to have this function
- It costs users time to try to migrate away from it, e.g.
https://github.com/NixOS/nixpkgs/pull/219747 and https://github.com/NixOS/nixpkgs/pull/275548
- Using it can give easier-to-read code like `all isNull list`
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
this also reduces forceValue code size and removes the need for
hideInDiagnostics. coopting thunk forcing like this has the additional
benefit of clarifying how these errors can happen in the first place.
checking for isBlackhole in the forceValue hot path is rather more
expensive than necessary, and with a little bit of trickery we can move
such handling into the isApp case. small performance benefit, but under
some circumstances we've seen 2% improvement as well.
〉 nix eval --raw --impure --expr 'with import <nixpkgs/nixos> {}; system'
before:
Time (mean ± σ): 4.429 s ± 0.002 s [User: 3.929 s, System: 0.500 s]
Range (min … max): 4.427 s … 4.433 s 10 runs
after:
Time (mean ± σ): 4.396 s ± 0.002 s [User: 3.894 s, System: 0.501 s]
Range (min … max): 4.393 s … 4.399 s 10 runs
`eval-system` option overrides just the value of `builtins.currentSystem`.
This is more useful than overriding `system` since you can build these
derivations on remote builders which can work on the given system.
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This makes for more useful manual table of contents, that displays the
information at a glance.
The `nix help-stores` command is kept as-is, even though it will show up
in the manual with the same information as these pages due to the way it
is written as a "`--help`-style" command. Deciding what to do with that
command is left for a later PR.
This change also lists all store types at the top of the respective overview page.
Co-authored-by: John Ericson <John.Ericson@Obsidian.Systems
* doc: primops: add more info for foldl
From the existing doc it is not obvious whether the first or the
second argument is the accumulator. This is however relevant to
know, as for certain scenarios, this might change the behavior.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Try to stay away from stack overflows.
These small vectors use stack space. Most instances will not need
to allocate because in general most things are small, and large
things are worth heap allocating.
16 * 3 * word = 384 bytes is still quite a bit, but these functions
tend not to be part of deep recursions.
VLAs are a dangerous feature, and their usage triggers an undefined
behavior since theire size can be zero in some cases.
So replace them with `boost::small_vector`s which fit the same goal but
are safer.
It's also incidentally consistently 1% faster on the benchmarks.
* Fix boost::bad_format_string exception in builtins.addErrorContext
The message passed to addTrace was incorrectly being used as a format
string and this this would cause an exception when the string contained
a '%', which can be hit in places where arbitrary file paths are
interpolated.
* add test
All OS and IO operations should be moved out, leaving only some misc
portable pure functions.
This is useful to avoid copious CPP when doing things like Windows and
Emscripten ports.
Newly exposed functions to break cycles:
- `restoreSignals`
- `updateWindowSize`
MemoryInputAccessor is an in-memory virtual filesystem that returns
files like <nix/fetchurl.nix>. This removes the need for special hacks
to handle those files.
We use the same nested map representation we used for goals, again in
order to save space. We might someday want to combine with `inputDrvs`,
by doing `V = bool` instead of `V = std::set<OutputName>`, but we are
not doing that yet for sake of a smaller diff.
The ATerm format for Derivations also needs to be extended, in addition
to the in-memory format. To accomodate this, we added a new basic
versioning scheme, so old versions of Nix will get nice errors. (And
going forward, if the ATerm format changes again the errors will be even
better.)
`parsedStrings`, an internal function used as part of parsing
derivations in A-Term format, used to consume the final `]` but expect
the initial `[` to already be consumed. This made for what looked like
unbalanced brackets at callsites, which was confusing. Now it consumes
both which is hopefully less confusing.
As part of testing, we also created a unit test for the A-Term format for
regular non-experimental derivations too.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Apply suggestions from code review
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Types converted:
- `NixStringContextElem`
- `OutputsSpec`
- `ExtendedOutputsSpec`
- `DerivationOutput`
- `DerivationType`
Existing ones mostly conforming the pattern cleaned up:
- `ContentAddressMethod`
- `ContentAddressWithReferences`
The `DerivationGoal::derivationType` field had a bogus initialization,
now caught, so I made it `std::optional`. I think #8829 can make it
non-optional again because it will ensure we always have the derivation
when we construct a `DerivationGoal`.
See that issue (#7479) for details on the general goal.
`git grep 'Raw::Raw'` indicates the two types I didn't yet convert
`DerivedPath` and `BuiltPath` (and their `Single` variants) . This is
because @roberth and I (can't find issue right now...) plan on reworking
them somewhat, so I didn't want to churn them more just yet.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
In the Nix language, given a drv path, we should be able to construct
another string referencing to one of its output. We can do this today
with `(import drvPath).output`, but this only works for derivations we
already have.
With dynamic derivations, however, that doesn't work well because the
`drvPath` isn't yet built: importing it like would need to trigger IFD,
when the whole point of this feature is to do "dynamic build graph"
without IFD!
Instead, what we want to do is create a placeholder value with the right
string context to refer to the output of the as-yet unbuilt derivation.
A new primop in the language, analogous to `builtins.placeholder` can be
used to create one. This will achieve all the right properties. The
placeholder machinery also will match out the `outPath` attribute for CA
derivations works.
In 60b7121d2c we added that type of
placeholder, and the derived path and string holder changes necessary to
support it. Then in the previous commit we cleaned up the code
(inspiration finally hit me!) to deduplicate the code and expose exactly
what we need. Now, we can wire up the primop trivally!
Part of RFC 92: dynamic derivations (tracking issue #6316)
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
`EvalState::mkSingleDerivedPathString` previously contained its own
inverse (printing, rather than parsing) in order to validate what was
parsed. Now that is pulled out into its own separate function:
`EvalState::coerceToSingleDerivedPath`.
In additional that pulled out logic is deduplicated with
`EvalState::mkOutputString` via `EvalState::mkOutputStringRaw`, which is
itself deduplicated (and generalized) with
`DownstreamPlaceholder::mkOutputStringRaw`.
All these changes make the unit tests simpler.
(We would ideally write more unit tests for `mkSingleDerivedPathString`
`coerceToSingleDerivedPath` directly, but we cannot yet do that because
the IO in reading the store path won't work when the dummy store cannot
hold anything. Someday we'll have a proper in-memory store which will
work for this.)
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
We want to be able to write down `foo.drv^bar.drv^baz`:
`foo.drv^bar.drv` is the dynamic derivation (since it is itself a
derivation output, `bar.drv` from `foo.drv`).
To that end, we create `Single{Derivation,BuiltPath}` types, that are
very similar except instead of having multiple outputs (in a set or
map), they have a single one. This is for everything to the left of the
rightmost `^`.
`NixStringContextElem` has an analogous change, and now can reuse
`SingleDerivedPath` at the top level. In fact, if we ever get rid of
`DrvDeep`, `NixStringContextElem` could be replaced with
`SingleDerivedPath` entirely!
Important note: some JSON formats have changed.
We already can *produce* dynamic derivations, but we can't refer to them
directly. Today, we can merely express building or example at the top
imperatively over time by building `foo.drv^bar.drv`, and then with a
second nix invocation doing `<result-from-first>^baz`, but this is not
declarative. The ethos of Nix of being able to write down the full plan
everything you want to do, and then execute than plan with a single
command, and for that we need the new inductive form of these types.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
- Better types
- Own header / C++ file pair
- Test factored out methods
- Pass parsed thing around more than strings
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Whereas `ContentAddressWithReferences` is a sum type complex because different
varieties support different notions of reference, and
`ContentAddressMethod` is a nested enum to support that,
`ContentAddress` can be a simple pair of a method and hash.
`ContentAddress` does not need to be a sum type on the outside because
the choice of method doesn't effect what type of hashes we can use.
Co-Authored-By: Cale Gibbard <cgibbard@gmail.com>
This is done in roughly the same way builtin functions are documented.
Also auto-link experimental features for primops, subsuming PR #8371.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
I got very confused trying to keep all the `first` and `second` straight
reading the code, *especially* as there is also another `(boolean,
string)` pair type also being used.
Named fields is much better.
There are other cleanups that we can do (for example, the existing
TODO), but we can do them later. Doing them now would just make this
harder to review.
