Some people want to avoid using registries at all on their system; Instead
of having to add --no-registries to every command, this commit allows to
set use-registries = false in the config. --no-registries is still allowed
everywhere it was allowed previously, but is now deprecated.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Before this commit, nixConfig.flake-registry didn't have any real effect
on the evaluation, since config was applied after inputs were evaluated.
Change this behavior: apply the config in the beginning of flake::lockFile.
This makes it possible to have per-project configuration in flake.nix,
e.g. binary caches and other stuff:
nixConfig.bash-prompt-suffix = "[1;35mngi# [0m";
nixConfig.substituters = [ "https://cache.ngi0.nixos.org/" ];
std::optional had redundant checks for whether it had a value.
An object is emplaced either way so it can be dereferenced
without repeating a value check
This fixes an issue where lockfile generation was not idempotent:
after updating a lockfile, a "follows" node would end up pointing to a
new copy of the node, rather than to the original node.
Caches tree in addition to lockedRef, and explicitly writes out the logic for different combinations of cached/uncached flakes and indirect/resolved/locked flakes. This eliminates uneccessary calls to lookupInFlakeCache, fetchTree, maybeLookupFlake, and flakeCache.push_back
The attributes previously stored in TreeInfo (narHash, revCount,
lastModified) are now stored in Input. This makes it less arbitrary
what attributes are stored where.
As a result, the lock file format has changed. An entry like
"info": {
"lastModified": 1585405475,
"narHash": "sha256-bESW0n4KgPmZ0luxvwJ+UyATrC6iIltVCsGdLiphVeE="
},
"locked": {
"owner": "NixOS",
"repo": "nixpkgs",
"rev": "b88ff468e9850410070d4e0ccd68c7011f15b2be",
"type": "github"
},
is now stored as
"locked": {
"owner": "NixOS",
"repo": "nixpkgs",
"rev": "b88ff468e9850410070d4e0ccd68c7011f15b2be",
"type": "github",
"lastModified": 1585405475,
"narHash": "sha256-bESW0n4KgPmZ0luxvwJ+UyATrC6iIltVCsGdLiphVeE="
},
The 'Input' class is now a dumb set of attributes. All the fetcher
implementations subclass InputScheme, not Input. This simplifies the
API.
Also, fix substitution of flake inputs. This was broken since lazy
flake fetching started using fetchTree internally.
In particular, doing 'nix build /path/to/dir' now works if
/path/to/dir is not a Git tree (it only has to contain a flake.nix
file).
Also, 'nix flake init' no longer requires a Git tree (but it will do a
'git add flake.nix' if it's a Git tree)
Future editions of flakes or the Nix language can be supported by
renaming flake.nix (e.g. flake-v2.nix). This avoids a bootstrap
problem where we don't know which grammar to use to parse
flake*.nix. It also allows a project to support multiple flake
editions, in theory.
This is useful for finding out what a registry lookup resolves to, e.g
$ nix flake info patchelf
Resolved URL: github:NixOS/patchelf
Locked URL: github:NixOS/patchelf/cd7955af31698c571c30b7a0f78e59fd624d0229
When we do something like 'nix flake update --override-input nixpkgs
...', the override is now kept on subsequent calls. (If you don't want
this behaviour, you can use --no-write-lock-file.)
This is now done in a single pass. Also fixes some issues when
updating flakes with circular dependencies. Finally, when using
'--recreate-lock-file --commit-lock-file', the commit message now
correctly shows the differences.
This improves reproducibility and may be faster than fetching from the
original source (especially for git/hg inputs, but probably also for
github inputs - our binary cache is probably faster than GitHub's
dynamically generated tarballs).
Unfortunately this doesn't work for the top-level flake since even if
we know the NAR hash of the tree, we don't know the other tree
attributes such as revCount and lastModified.
Fixes#3253.
Typical usage:
$ nix flake update ~/Misc/eelco-configurations/hagbard --update-input nixpkgs
to update the 'nixpkgs' input of a flake while leaving every other
input unchanged.
The argument is an input path, so you can do e.g. '--update-input
dwarffs/nixpkgs' to update an input of an input.
Fixes#2928.
Added a flag --no-update-lock-file to barf if the lock file needs any
changes. This is useful for CI systems if you're building a
checkout. Fixes#2947.
Renamed --no-save-lock-file to --no-write-lock-file. It is now a fatal
error if the lock file needs changes but --no-write-lock-file is not
given.
E.g.
$ nix flake update ~/Misc/eelco-configurations/hagbard \
--override-input 'dwarffs/nixpkgs' ../my-nixpkgs
overrides the 'nixpkgs' input of the 'dwarffs' input of the top-level
flake.
Fixes#2837.
When computing a lock file, we now respect the lock files of flake
inputs. This is important for usability / reproducibility. For
example, the 'nixops' flake depends on the 'nixops-aws' and
'nixops-hetzner' repositories. So when the 'nixops' flake is used in
another flake, we want the versions of 'nixops-aws' and
'nixops-hetzner' locked by the the 'nixops' flake because those
presumably have been tested.
This can lead to a proliferation of versions of flakes like 'nixpkgs'
(since every flake's lock file could depend on a different version of
'nixpkgs'). This is not a major issue when using Nixpkgs overlays or
NixOS modules, since then the top-level flake composes those
overlays/modules into *its* version of Nixpkgs and all other versions
are ignored. Lock file computation has been made a bit more lazy so it
won't try to fetch all those versions of 'nixpkgs'.
However, in case it's necessary to minimize flake versions, there now
are two input attributes that allow this. First, you can copy an input
from another flake, as follows:
inputs.nixpkgs.follows = "dwarffs/nixpkgs";
This states that the calling flake's 'nixpkgs' input shall be the same
as the 'nixpkgs' input of the 'dwarffs' input.
Second, you can override inputs of inputs:
inputs.nixpkgs.url = github:edolstra/nixpkgs/<hash>;
inputs.nixops.inputs.nixpkgs.url = github:edolstra/nixpkgs/<hash>;
or equivalently, using 'follows':
inputs.nixpkgs.url = github:edolstra/nixpkgs/<hash>;
inputs.nixops.inputs.nixpkgs.follows = "nixpkgs";
This states that the 'nixpkgs' input of the 'nixops' input shall be
the same as the calling flake's 'nixpkgs' input.
Finally, at '-v' Nix now prints the changes to the lock file, e.g.
$ nix flake update ~/Misc/eelco-configurations/hagbard
inputs of flake 'git+file:///home/eelco/Misc/eelco-configurations?subdir=hagbard' changed:
updated 'nixpkgs': 'github:edolstra/nixpkgs/7845bf5f4b3013df1cf036e9c9c3a55a30331db9' -> 'github:edolstra/nixpkgs/03f3def66a104a221aac8b751eeb7075374848fd'
removed 'nixops'
removed 'nixops/nixops-aws'
removed 'nixops/nixops-hetzner'
removed 'nixops/nixpkgs'
The store path is not enough. For example, when we build a dirty tree,
commit, and build the clean tree, a re-evaluation is necessary because
the flake may depend on the lastModified or revCount attributes.
Fixes
error: the content hash of flake '/home/eelco/Dev/nixpkgs-flake?ref=HEAD&rev=0000000000000000000000000000000000000000' doesn't match the hash recorded in the referring lockfile
Experimental features are now opt-in. There are currently two
experimental features: "nix-command" (which enables the "nix"
command), and "flakes" (which enables support for flakes). This will
allow us to merge experimental features more quickly, without
committing to supporting them indefinitely.
Typical usage:
$ nix build --experimental-features 'nix-command flakes' nixpkgs#hello
In particular, when building a flake lock file, inputs like 'nixpkgs'
are now downloaded only once. Previously, it would fetch
https://api.github.com/repos/<owner>/<repo>/tarball/<ref> and then
later https://api.github.com/repos/<owner>/<repo>/tarball/<rev>, even
though they produce the same result.
Git and GitHub now also share a cache that maps revs to a store path
and other info.
For example, if the top-level flake depends on
"nixpkgs/release-19.03", and one of its dependencies depends on
"nixpkgs", then the latter will be mapped to "nixpkgs/release-19.03",
rather than whatever the default branch of "nixpkgs" is. Thus you get
only one "nixpkgs" dependency rather than two.
This currently only works in a breadth-first way, so the other way
around (i.e. if the top-level flake depends on "nixpkgs", and a
dependency depends on "nixpkgs/release-19.03") still results in two
"nixpkgs" dependencies.
If 'input.<name>.uri' changes, then the entry in the lockfile for
input <name> should be considered stale.
Also print some messages when lock file entries are added/updated.
Instead of a list, inputs are now an attrset like
inputs = {
nixpkgs.uri = github:NixOS/nixpkgs;
};
If 'uri' is omitted, than the flake is a lookup in the flake registry, e.g.
inputs = {
nixpkgs = {};
};
but in that case, you can also just omit the input altogether and
specify it as an argument to the 'outputs' function, as in
outputs = { self, nixpkgs }: ...
This also gets rid of 'nonFlakeInputs', which are now just a special
kind of input that have a 'flake = false' attribute, e.g.
inputs = {
someRepo = {
uri = github:example/repo;
flake = false;
};
};
