In principle, this should avoid deadlocks where two instances of Nix are
holding a shared lock on big-lock and are both waiting to get an
exclusive lock.
However, it seems like `flock(2)` is supposed to do this automatically,
so it's not clear whether this is actually where the problem comes from.
This makes 'nix develop' set the Linux personality in the same way
that the actual build does, allowing a command like 'nix develop
nix#devShells.i686-linux.default' on x86_64-linux to work correctly.
Without this, the error is lost, and it makes for a hard to debug
situation. Also remove some of the busyness inside the sqlite_open_v2
args.
The errcode returned is not the extended one. The only way to make open
return an extended code, would be to add SQLITE_OPEN_EXRESCODE to the
flags. In the future it might be worth making this change,
which would also simplify the existing SQLiteError code.
This makes 'nix build' work on paths (which will be copied to the
store) and store paths (returned as is). E.g. the following flake
output attributes can be built using 'nix build .#foo':
foo = ./src;
foo = self.outPath;
foo = builtins.fetchTarball { ... };
foo = (builtins.fetchTree { .. }).outPath;
foo = builtins.fetchTree { .. } + "/README.md";
foo = builtins.storePath /nix/store/...;
Note that this is potentially risky, e.g.
foo = /.;
will cause Nix to try to copy the entire file system to the store.
What doesn't work yet:
foo = self;
foo = builtins.fetchTree { .. };
because we don't handle attrsets with an outPath attribute in it yet,
and
foo = builtins.storePath /nix/store/.../README.md;
since result symlinks have to point to a store path currently (rather
than a file inside a store path).
Fixes#7417.
They did not include the detailed error message, losing essential
information for troubleshooting.
Example message:
warning: creating statement 'insert or rplace into NARs(cache, hashPart, namePart, url, compression, fileHash, fileSize, narHash, narSize, refs, deriver, sigs, ca, timestamp, present) values (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, 1)': at offset 10: SQL logic error, near "rplace": syntax error (in '/tmp/nix-shell.grQ6f7/nix-test/tests/binary-cache/test-home/.cache/nix/binary-cache-v6.sqlite')
It's not the best example; more important information will be in
the message for e.g. a constraint violation.
I don't see why this specific error is printed as a warning, but
that's for another commit.
Unsetting `build-users-group` (without `auto-allocate-uids` enabled)
gives the following error:
```
src/libstore/lock.cc:25: static std::unique_ptr<nix::UserLock> nix::SimpleUserLock::acquire(): Assertion `settings.buildUsersGroup != ""' failed.
```
Fix the logic in `useBuildUsers` and document the default value
for `build-users-group`.
This makes the position object used in exceptions abstract, with a
method getSource() to get the source code of the file in which the
error originated. This is needed for lazy trees because source files
don't necessarily exist in the filesystem, and we don't want to make
libutil depend on the InputAccessor type in libfetcher.
Make everything be in the form "while ..." (most things were already),
and in particular *don't* use other propositions that must go after or
before specific "while ..." clauses to make sense.
When debugging nix expressions the outermost trace tends to be more useful
than the innermost. It is therefore printed last to save developers from
scrolling.
We used to set enforceDeterminism to true in the settings (by default)
and thus did send a non-zero value over the wire. The value should
probably be ignored as it should only matter if nrRounds is non-zero
as well.
Having the old code here where the value is expected to be zero only
works with the same version of Nix where we are sending zero. We
should always test this against older Nix versions being client or
server as otherwise upgrade in larger networks might be a pain.
Fixes 8e0946e8df
Fix#6209
When trying to run `nix log <installable>`, try first to resolve the derivation pointed to
by `<installable>` as it is the resolved one that holds the build log.
This has a couple of shortcomings:
1. It’s expensive as it requires re-reading the derivation
2. It’s brittle because if the derivation doesn’t exist anymore or can’t
be resolved (which is the case if any one of its build inputs is missing),
then we can’t access the log anymore
However, I don’t think we can do better (at least not right now).
The alternatives I see are:
1. Copy the build log for the un-resolved derivation. But that means a
lot of duplication
2. Store the results of the resolving in the db. Which might be the best
long-term solution, but leads to a whole new class of potential
issues.
These only functioned if a very narrow combination of conditions held:
- The result path does not yet exist (--check did not result in
repeated builds), AND
- The result path is not available from any configured substituters, AND
- No remote builders that can build the path are available.
If any of these do not hold, a derivation would be built 0 or 1 times
regardless of the repeat option. Thus, remove it to avoid confusion.
The old way was not correct.
Here is an example:
```
$ nix-instantiate --eval --expr 'let x = a: throw "asdf"; in x 1' --show-trace
error: asdf
… while evaluating 'x'
at «string»:1:9:
1| let x = a: throw "asdf"; in x 1
| ^
… from call site
at «string»:1:29:
1| let x = a: throw "asdf"; in x 1
| ^
```
and yet also:
```
$ nix-instantiate --eval --expr 'let x = a: throw "asdf"; in x' --show-trace
<LAMBDA>
```
Here is the thing: in both cases we are evaluating `x`!
Nix is a higher-order languages, and functions are a sort of value. When
we write `x = a: ...`, `a: ...` is the expression that `x` is being
defined to be, and that is already a value. Therefore, we should *never*
get an trace that says "while evaluating `x`", because evaluating `a:
...` is *trival* and nothing happens during it!
What is actually happening here is we are applying `x` and evaluating
its *body* with arguments substituted for parameters. I think the
simplest way to say is just "while *calling* `x`", and so that is what I
changed it to.
We need to close the GC server socket before shutting down the active
GC client connections, otherwise a client may (re)connect and get
ECONNRESET. But also handle ECONNRESET for resilience.
Fixes random failures like
GC socket disconnected
connecting to '/tmp/nix-shell.y07M0H/nix-test/default/var/nix/gc-socket/socket'
sending GC root '/tmp/nix-shell.y07M0H/nix-test/default/store/kb5yzija0f1x5xkqkgclrdzldxj6nnc6-non-blocking'
reading GC root from client: error: unexpected EOF reading a line
1 store paths deleted, 0.00 MiB freed
error: reading from file: Connection reset by peer
in gc-non-blocking.sh.
It calls strlen() on the input (rather than simply copying at most
`size` bytes), which can fail if the input is not zero-terminated and
is inefficient in any case.
Fixes#7347.
why-depends assumed that we knew the output path of the second argument.
For CA derivations, we might not know until it's built. One way to solve
this would be to build the second installable to get the output path.
In this case we don't need to, though. If the first installable (A)
depends on the second (B), then getting the store path of A will
necessitate having the store path B. The contrapositive is, if the store
path of B is not known (i.e. it's a CA derivation which hasn't been
built), then A does not depend on B.
We shouldn't skip this if the supplementary group list is empty,
because then the sandbox won't drop the supplementary groups of the
parent (like "root").
The new experimental feature 'cgroups' enables the use of cgroups for
all builds. This allows better containment and enables setting
resource limits and getting some build stats.
It occurred when a output of the dependency was already available,
so it didn't need rebuilding and didn't get added to the
inputDrvOutputs.
This process-related info wasn't suitable for the purpose of finding
the actual input paths for the builder. It is better to do this in
absolute terms by querying the store.
This change is needed to support aws-sdk-cpp 1.10 and newer.
I opted not to make this dependent on the sdk version because
the crt dependency has been in the interface of the older
sdk as well, and it was only coincidence that libstore didn't
make use of any privately defined symbols directly.
When calling `builtins.readFile` on a store path, the references of that
path are currently added to the resulting string's context.
This change makes those references the *possible* context of the string,
but filters them to keep only the references whose hash actually appears
in the string, similarly to what is done for determining the runtime
references of a path.
Cgroups are now only used for derivations that require the uid-range
range feature. This allows auto UID allocation even on systems that
don't have cgroups (like macOS).
Also, make things work on modern systems that use cgroups v2 (where
there is a single hierarchy and no "systemd" controller).
after discussing this with multiple people, I'm convinced that "build
task" is more precise: a derivation is not an action, but inert until it
is built. also it's easier to pronounce.
proposal: use "build task" for the generic concept "description of how
to derive new files from the contents of existing files". then it will
be easier to distinguish what we mean by "derivation" (a specific data
structure and Nix language value type) and "store derivation" (a
serialisation of a derivation into a file in the Nix store).
readline is not re-entrant, so entering the debugger from the
completioncallback results in an eventual segfault.
The workaround is to temporarily disable the debugger when searching
for possible completions.
Call it as `['nix', '__build-remote', ... ]` rather than the previous
`["__build-remote", "nix __build-remote", ... ]` which seemed to have
been most likely unintended
The description of the --profile option talks about the "update" operation.
This is probably meant for operations such as "nix profile install", but the
same option is reused in other subcommands, which do not update the profile,
such as "nix profile {list,history,diff-closures}".
We update the description to make sense in both contexts.
Currently, Nix passes `-a` when it runs commands on a remote machine via
SSH, which disables agent forwarding. This causes issues when the
`ForwardAgent` option is set in SSH config files, as the command line
operation always overrides those.
In particular, this causes issues if the command being run is `sudo`
and the remote machine is configured with the equivalent of NixOS's
`security.pam.enableSSHAgentAuth` option. Not allowing SSH agent
forwarding can cause authentication to fail unexpectedly.
This can currently be worked around by setting `NIX_SSHOPTS="-A"`, but
we should defer to the options in the SSH config files to be least
surprising for users.
* Clarify the documentation of foldl': That the arguments are forced
before application (?) of `op` is necessarily true. What is important
to stress is that we force every application of `op`, even when the
value turns out to be unused.
* Move the example before the comment about strictness to make it less
confusing: It is a general example and doesn't really showcase anything
about foldl' strictness.
* Add test cases which nail down aspects of foldl' strictness:
* The initial accumulator value is not forced unconditionally.
* Applications of op are forced.
* The list elements are not forced unconditionally.
After we've send "\2\n" to the parent, we can't send a serialized
exception anymore. It will show up garbled like
$ nix-build --store /tmp/nix --expr 'derivation { name = "foo"; system = "x86_64-linux"; builder = "/foo/bar"; }'
this derivation will be built:
/nix/store/xmdip0z5x1zqpp6gnxld3vqng7zbpapp-foo.drv
building '/nix/store/xmdip0z5x1zqpp6gnxld3vqng7zbpapp-foo.drv'...
ErrorErrorEexecuting '/foo/bar': No such file or directory
error: builder for '/nix/store/xmdip0z5x1zqpp6gnxld3vqng7zbpapp-foo.drv' failed with exit code 1
While trying to use an alternate directory for my Nix installation, I
noticed that nix's output didn't reflect the updated state
directory. This patch corrects that and now prints the warning before
attempting to create the directory (if the directory creation fails,
it wouldn't have been obvious why nix was attempting to create the
directory in the first place).
With this patch, I now get the following warning:
warning: '/home/deck/.var/app/org.nixos.nix/var/nix' does not
exist, so Nix will use '/home/deck/.local/share/nix/root' as a
chroot store
The documentation for `parseDrvName` does not agree with the implementation when
the derivation name contains a dash which is followed by something that is
neither a letter nor a digit. This commit corrects the documentation to agree
with the implementation.
If we don't have any github token, we won't be able to fetch private
repos, but we are also more likely to run into API limits since
we don't have a token. To mitigate this only ever use the github api
if we actually have a token.
The current definition of `intersectAttrs` is incorrect:
> Return a set consisting of the attributes in the set e2 that also exist in the
> set e1.
Recall that (Nix manual, section 5.1):
> An attribute set is a collection of name-value-pairs (called attributes)
According to the existing description of `intersectAttrs`, the following should
evaluate to the empty set, since no key-value *pair* (i.e. attribute) exists in
both sets:
```
builtins.intersectAttrs { x=3; } {x="foo";}
```
And yet:
```
nix-repl> builtins.intersectAttrs { x=3; } {x="foo";}
{ x = "foo"; }
```
Clearly the intent here was for the *names* of the resulting attribute set to be
the intersection of the *names* of the two arguments, and for the values of the
resulting attribute set to be the values from the second argument.
This commit corrects the definition, making it match the implementation and intent.
Make sure that people who run Nix in non-interactive mode (and so don't have the possibility to interactively accept the individual flake configuration settings) are aware of this flag.
Fix#7086
These settings seem harmless, they control the same polling
functionality that timeout does, but with different behavior. Should
be safe for untrusted users to pass in.
I just had a colleague get confused by the previous phrase for good
reason. "valid" sounds like an *objective* criterion, e.g. and *invalid
signature* would be one that would be trusted by no one, e.g. because it
misformatted or something.
What is actually going is that there might be a signature which is
perfectly valid to *someone else*, but not to the user, because they
don't trust the corresponding public key. This is a *subjective*
criterion, because it depends on the arbitrary and personal choice of
which public keys to trust.
I therefore think "trustworthy" is a better adjective to use. Whether
something is worthy of trust is clearly subjective, and then "trust"
within that word nicely evokes `trusted-public-keys` and friends.
The history is not critical to the functionality of nix repl, so it's
enough to warn here, rather than refuse to start if the directory Nix
thinks the history should live in can't be created.
- call close explicitly in writeFile to prevent the close exception
from being ignored
- fsync after writing schema file to flush data to disk
- fsync schema file parent to flush metadata to disk
https://github.com/NixOS/nix/issues/7064
Remove the `verify TLS: Nix CA file = 'blah'` message that Nix used to print when fetching anything as it's both useless (`libcurl` prints the same info in its logs) and misleading (gives the impression that a new TLS connection is being established which might not be the case because of multiplexing. See #7011 )
This commit adds an optional `__impure` parameter to fetchurl.nix, which allows
the caller to use `libfetcher`'s fetcher in an impure derivation. This allows
nixpkgs' patch-normalizing fetcher (fetchpatch) to be rewritten to use nix's
internal fetchurl, thereby eliminating the awkward "you can't use fetchpatch
here" banners scattered all over the place.
See also: https://github.com/NixOS/nixpkgs/pull/188587
Implements the approach suggested by feedback on PR #6994, where
tempdir paths are created in the store (now with an exclusive lock).
As part of this work, the currently-broken and unused
`createTempDirInStore` function is updated to create an exclusive lock
on the temp directory in the store.
The GC now makes a non-blocking attempt to lock any store directories
that "look like" the temp directories created by this function, and if
it can't acquire one, ignores the directory.
Stdenv sets this to a bash that doesn't have readline/completion
support, so running 'nix (develop|shell)' inside a 'nix develop' gives
you a crippled shell. So let's just ignore the derivation's $SHELL.
This could break interactive use of build phases that use $SHELL, but
they appear to be fairly rare.
Disables the SA_RESTART behavior on macOS which causes:
> Restarting of pending calls is requested by setting the SA_RESTART bit
> in sa_flags. The affected system calls include read(2), write(2),
> sendto(2), recvfrom(2), sendmsg(2) and recvmsg(2) on a communications
> channel or a slow device (such as a terminal, but not a regular file)
> and during a wait(2) or ioctl(2).
From: https://man.openbsd.org/sigaction#SA_RESTART
This being set on macOS caused a bug where read() calls to the daemon
socket were blocking after a SIGINT was received. As a result,
checkInterrupt was never reached even though the signal was received
by the signal handler thread.
On Linux, SA_RESTART is disabled by default. This probably effects
other BSDs but I don’t have the ability to test it there right now.
readDerivation is pretty slow, and while it may not be significant for
some use cases, on things like ghc-nix where we have thousands of
derivations is really slows things down.
So, this just doesn’t do the impure derivation check if the impure
derivation experimental feature is disabled. Perhaps we could cache
the result of isPure() and keep the check, but this is a quick fix to
for the slowdown introduced with impure derivations features in 2.8.0.
this simplifies the setup a lot, and avoids weird looking `./file.md`
links showing up.
it also does not show regular URLs any more. currently the command
reference only has few of them, and not showing them in the offline
documentation is hopefully not a big deal.
instead of building more special-case solutions, clumsily preprocessing
the input, or issuing verbal rules on dealing with URLs, should better
be solved sustainably by not rendering relative links in `lowdown`:
https://github.com/kristapsdz/lowdown/issues/105
This was caused by -L calling setLogFormat() again, which caused the
creation of a new progress bar without destroying the old one. So we
had two progress bars clobbering each other.
We should change 'logger' to be a smart pointer, but I'll do that in a
future PR.
Fixes#6931.
98e361ad4c introduced a regression where
previously stored attributes were replaced by placeholders. As a
result, a command like 'nix build nixpkgs#hello' had to be executed at
least twice to get caching.
This code does not seem necessary for suggestions to work.
This issue made it impossible for clients using a serve protocol of
version <= 2.3 to use the `cmdBuildDerivation` command of servers using
a protocol of version >= 2.6. The faulty version check makes the server
send back build outputs that the client is not expecting.
This hang for some reason didn't trigger in the Nix build, but did
running 'make installcheck' interactively. What happened:
* Store::addMultipleToStore() calls a SinkToSource object to copy a
path, which in turn calls LegacySSHStore::narFromPath(), which
acquires a connection.
* The SinkToSource object is not destroyed after the last bytes has
been read, so the coroutine's stack is still alive and its
destructors are not run. So the connection is not released.
* Then when the next path is copied, because max-connections = 1,
LegacySSHStore::narFromPath() hangs forever waiting for a connection
to be released.
The fix is to make sure that the source object is destroyed when we're
done with it.
Makes `printValueAsJSON` not copy paths to the store for `nix eval
--json`, `nix-instantiate --eval --json` and `nix-env --json`.
Fixes https://github.com/NixOS/nix/issues/5612
RewritingSink can handle being fed input where a reference crosses a
chunk boundary. we don't need to load the whole source into memory, and
in fact *not* loading the whole source lets nix build FODs that do not
fit into memory (eg fetchurl'ing data files larger than system memory).
Some activities are numerous but usually very short (e.g. copying a
source file to the store) which would cause a lot of flickering. So
only show activities that have been running for at least 10 ms.
Rather than directly copying the source to its dest, copy it first to a
temporary location, and eventually move that temporary.
That way, the move is at least atomic from the point-of-view of the destination
The recursive copy from the stl doesn’t exactly do what we need because
1. It doesn’t delete things as we go
2. It doesn’t keep the mtime, which change the nars
So re-implement it ourselves. A bit dull, but that way we have what we want
In `nix::rename`, if the call to `rename` fails with `EXDEV` (failure
because the source and the destination are in a different filesystems)
switch to copying and removing the source.
To avoid having to re-implement the copy manually, I switched the
function to use the c++17 `filesystem` library (which has a `copy`
function that should do what we want).
Fix#6262
Once a derivation goal has been completed, we check whether or not
this goal was meant to be repeated to check its output.
An early return branch was preventing the worker to reach that repeat
code branch, hence breaking the --check command (#2619).
It seems like this early return branch is an artifact of a passed
refactoring. As far as I can tell, buildDone's main branch also
cleanup the tmp directory before returning.
By default, Nix sets the "cores" setting to the number of CPUs which are
physically present on the machine. If cgroups are used to limit the CPU
and memory consumption of a large Nix build, the OOM killer may be
invoked.
For example, consider a GitLab CI pipeline which builds a large software
package. The GitLab runner spawns a container whose CPU is limited to 4
cores and whose memory is limited to 16 GiB. If the underlying machine
has 64 cores, Nix will invoke the build with -j64. In many cases, that
level of parallelism will invoke the OOM killer and the build will
completely fail.
This change sets the default value of "cores" to be
ceil(cpu_quota / cpu_period), with a fallback to
std:🧵:hardware_concurrency() if cgroups v2 is not detected.
The workaround for "Some distros patch Linux" mentioned in
local-derivation-goal.cc will not help in the `--option
sandbox-fallback false` case. To provide the user more helpful
guidance on how to get the sandbox working, let's check to see if the
`/proc` node created by the aforementioned patch is present and
configured in a way that will cause us problems. If so, give the user
a suggestion for how to troubleshoot the problem.
local-derivation-goal.cc contains a comment stating that "Some distros
patch Linux to not allow unprivileged user namespaces." Let's give a
pointer to a common version of this patch for those who want more
details about this failure mode.
This commit causes nix to `warn()` if sandbox setup has failed and
`/proc/self/ns/user` does not exist. This is usually a sign that the
kernel was compiled without `CONFIG_USER_NS=y`, which is required for
sandboxing.
This commit uses `warn()` to notify the user if sandbox setup fails
with errno==EPERM and /proc/sys/user/max_user_namespaces is missing or
zero, since that is at least part of the reason why sandbox setup
failed.
Note that `echo -n 0 > /proc/sys/user/max_user_namespaces` or
equivalent at boot time has been the recommended mitigation for
several Linux LPE vulnerabilities over the past few years. Many users
have applied this mitigation and then forgotten that they have done
so.
The failure modes for nix's sandboxing setup are pretty complicated.
When nix is unable to set up the sandbox, let's provide more detail
about what went wrong. Specifically:
* Make sure the error message includes the word "sandbox" so the user
knows that the failure was related to sandboxing.
* If `--option sandbox-fallback false` was provided, and removing it
would have allowed further attempts to make progress, let the user
know.
I recently got fairly confused why the following expression didn't have
any effect
{
description = "Foobar";
inputs.sops-nix = {
url = github:mic92/sops-nix;
inputs.nixpkgs_22_05.follows = "nixpkgs";
};
}
until I found out that the input was called `nixpkgs-22_05` (please note
the dash vs. underscore).
IMHO it's not a good idea to not throw an error in that case and
probably leave end-users rather confused, so I implemented a small check
for that which basically checks whether `follows`-declaration from
overrides actually have corresponding inputs in the transitive flake.
In fact this was done by accident already in our own test-suite where
the removal of a `follows` was apparently forgotten[1].
Since the key of the `std::map` that holds the `overrides` is a vector
and we have to find the last element of each vector (i.e. the override)
this has to be done with a for loop in O(n) complexity with `n` being
the total amount of overrides (which shouldn't be that large though).
Please note that this doesn't work with nested expressions, i.e.
inputs.fenix.inputs.nixpkgs.follows = "...";
which is a known problem[2].
For the expression demonstrated above, an error like this will be
thrown:
error: sops-nix has a `follows'-declaration for a non-existant input nixpkgs_22_05!
[1] 2664a216e5
[2] https://github.com/NixOS/nix/issues/5790
Defers completion of flake inputs until the whole command line is parsed
so that we know what flakes we need to complete the inputs of.
Previously, `nix build flake --update-input <Tab>` always behaved like
`nix build . --update-input <Tab>`.
Prevents errors when running with UBSan:
/nix/store/j5vhrywqmz1ixwhsmmjjxa85fpwryzh0-gcc-11.3.0/include/c++/11.3.0/bits/stl_pair.h:353:4: runtime error: load of value 229, which is not a valid value for type 'AttrType'
Specifically, if we're not root and the daemon socket does not exist,
then we use ~/.local/share/nix/root as a chroot store. This enables
non-root users to download nix-static and have it work out of the box,
e.g.
ubuntu@ip-10-13-1-146:~$ ~/nix run nixpkgs#hello
warning: '/nix' does not exists, so Nix will use '/home/ubuntu/.local/share/nix/root' as a chroot store
Hello, world!
With this, Nix will write a copy of the sandbox shell to /bin/sh in
the sandbox rather than bind-mounting it from the host filesystem.
This makes /bin/sh work out of the box with nix-static, i.e. you no
longer get
/nix/store/qa36xhc5gpf42l3z1a8m1lysi40l9p7s-bootstrap-stage4-stdenv-linux/setup: ./configure: /bin/sh: bad interpreter: No such file or directory
This allows changes to nix-cache-info to be picked up by existing
clients. Previously, the only way for this to happen would be for
clients to delete binary-cache-v6.sqlite, which is quite awkward for
users.
On the other hand, updates to nix-cache-info should be pretty rare,
hence the choice of a fairly long TTL. Configurability is probably not
useful enough to warrant implementing it.
Allow `nix build flake1 flake2 --update-input <Tab>` to complete the
inputs of both flakes.
Also do tilde expansion so that `nix build ~/flake --update-input <Tab>`
works.
Useful because a default `sudo` on darwin doesn't clear `$HOME`, so things like `sudo nix-channel --list`
will surprisingly return the USER'S channels, rather than `root`'s.
Other counterintuitive outcomes can be seen in this PR description:
https://github.com/NixOS/nix/pull/6622
Basically an attempt to resume fixing #5543 for a breakage introduced
earlier[1]. Basically, when evaluating an older `nixpkgs` with
`nix-shell` the following error occurs:
λ ma27 [~] → nix-shell -I nixpkgs=channel:nixos-18.03 -p nix
error: anonymous function at /nix/store/zakqwc529rb6xcj8pwixjsxscvlx9fbi-source/pkgs/top-level/default.nix:20:1 called with unexpected argument 'inNixShell'
at /nix/store/zakqwc529rb6xcj8pwixjsxscvlx9fbi-source/pkgs/top-level/impure.nix:82:1:
81|
82| import ./. (builtins.removeAttrs args [ "system" "platform" ] // {
| ^
83| inherit config overlays crossSystem;
This is a problem because one of the main selling points of Nix is that
you can evaluate any old Nix expression and still get the same result
(which also means that it *still evaluates*). In fact we're deprecating,
but not removing a lot of stuff for that reason such as unquoted URLs[2]
or `builtins.toPath`. However this property was essentially thrown away
here.
The change is rather simple: check if `inNixShell` is specified in the
formals of an auto-called function. This means that
{ inNixShell ? false }:
builtins.trace inNixShell
(with import <nixpkgs> { }; makeShell { name = "foo"; })
will show `trace: true` while
args@{ ... }:
builtins.trace args.inNixShell
(with import <nixpkgs> { }; makeShell { name = "foo"; })
will throw the following error:
error: attribute 'inNixShell' missing
This is explicitly needed because the function in
`pkgs/top-level/impure.nix` of e.g. NixOS 18.03 has an ellipsis[3], but
passes the attribute-set on to another lambda with formals that doesn't
have an ellipsis anymore (hence the error from above). This was perhaps
a mistake, but we can't fix it anymore. This also means that there's
AFAICS no proper way to check if the attr-set that's passed to the Nix
code via `EvalState::autoCallFunction` is eventually passed to a lambda
with formals where `inNixShell` is missing.
However, this fix comes with a certain price. Essentially every
`shell.nix` that assumes `inNixShell` to be passed to the formals even
without explicitly specifying it would break with this[4]. However I think
that this is ugly, but preferable:
* Nix 2.3 was declared stable by NixOS up until recently (well, it still
is as long as 21.11 is alive), so most people might not have even
noticed that feature.
* We're talking about a way shorter time-span with this change being
in the wild, so the fallout should be smaller IMHO.
[1] 9d612c393a
[2] https://github.com/NixOS/rfcs/pull/45#issuecomment-488232537
[3] https://github.com/NixOS/nixpkgs/blob/release-18.03/pkgs/top-level/impure.nix#L75
[4] See e.g. the second expression in this commit-message or the changes
for `tests/ca/nix-shell.sh`.
Overrides for inputs with flake=false were non-sticky, since they
changed the `original` in `flake.lock`. This fixes it, by using the same
locked original for both flake and non-flake inputs.
nixos/nix#6290 introduced a regex pattern to account for tags when
resolving sourcehut refs. nixos/nix#4638 reafactored the code,
accidentally treating the pattern as a regular string, causing all
non-HEAD ref resolving to break.
This fixes the regression and adds more test cases to avoid future
breakage.
The manpage for `getgrouplist` says:
> If the number of groups of which user is a member is less than or
> equal to *ngroups, then the value *ngroups is returned.
>
> If the user is a member of more than *ngroups groups, then
> getgrouplist() returns -1. In this case, the value returned in
> *ngroups can be used to resize the buffer passed to a further
> call getgrouplist().
In our original code, however, we allocated a list of size `10` and, if
`getgrouplist` returned `-1` threw an exception. In practice, this
caused the code to fail for any user belonging to more than 10 groups.
While unusual for single-user systems, large companies commonly have a
huge number of POSIX groups users belong to, causing this issue to crop
up and make multi-user Nix unusable in such settings.
The fix is relatively simple, when `getgrouplist` fails, it stores the
real number of GIDs in `ngroups`, so we must resize our list and retry.
Only then, if it errors once more, we can raise an exception.
This should be backported to, at least, 2.9.x.
Bring back the possibility to copy CA paths with no reference (like the
outputs of FO derivations or stuff imported at eval time) between stores
that have a different prefix.
If a package's attribute path, description or name contains matches for any of the
regexes specified via `-e` or `--exclude` that package is excluded from
the final output.
Currently nix-build prints the "printMissing" information by default,
nix build doesn’t.
People generally don‘t notice this because the standard log-format of
nix build would not display the printMissing
output long enough to perceive the information.
This addresses https://github.com/NixOS/nix/issues/6561
To quote Eelco in #5867:
> Unfortunately we can't do
>
> evalSettings.pureEval.setDefault(false);
>
> because then we have to do the same in main.cc (where
> pureEval is set to true), and that would allow pure-eval
> to be disabled globally from nix.conf.
Instead, a command should specify that it should be impure by
default. Then, `evalSettings.pureEval` will be set to `false;` unless
it's overridden by e.g. a CLI flag.
In that case it's IMHO OK to be (theoretically) able to override
`pure-eval` via `nix.conf` because it doesn't have an effect on commands
where `forceImpureByDefault` returns `false` (i.e. everything where pure
eval actually matters).
Closes#5867
