I think it is bad for these reasons when `tests/` contains a mix of
functional and integration tests
- Concepts is harder to understand, the documentation makes a good
unit vs functional vs integration distinction, but when the
integration tests are just two subdirs within `tests/` this is not
clear.
- Source filtering in the `flake.nix` is more complex. We need to
filter out some of the dirs from `tests/`, rather than simply pick
the dirs we want and take all of them. This is a good sign the
structure of what we are trying to do is not matching the structure
of the files.
With this change we have a clean:
```shell-session
$ git show 'HEAD:tests'
tree HEAD:tests
functional/
installer/
nixos/
```
In #4770 I implemented proper `nix-shell(1)` support for derivations
using `__structuredAttrs = true;`. Back then we decided to introduce two
new environment variables, `NIX_ATTRS_SH_FILE` for `.attrs.sh` and
`NIX_ATTRS_JSON_FILE` for `.attrs.json`. This was to avoid having to
copy these files to `$NIX_BUILD_TOP` in a `nix-shell(1)` session which
effectively meant copying these files to the project dir without
cleaning up afterwords[1].
On last NixCon I resumed hacking on `__structuredAttrs = true;` by
default for `nixpkgs` with a few other folks and getting back to it,
I identified a few problems with the how it's used in `nixpkgs`:
* A lot of builders in `nixpkgs` don't care about the env vars and
assume that `.attrs.sh` and `.attrs.json` are in `$NIX_BUILD_TOP`.
The sole reason why this works is that `nix-shell(1)` sources
the contents of `.attrs.sh` and then sources `$stdenv/setup` if it
exists. This may not be pretty, but it mostly works. One notable
difference when using nixpkgs' stdenv as of now is however that
`$__structuredAttrs` is set to `1` on regular builds, but set to
an empty string in a shell session.
Also, `.attrs.json` cannot be used in shell sessions because
it can only be accessed by `$NIX_ATTRS_JSON_FILE` and not by
`$NIX_BUILD_TOP/.attrs.json`.
I considered changing Nix to be compatible with what nixpkgs
effectively does, but then we'd have to either move $NIX_BUILD_TOP for
shell sessions to a temporary location (and thus breaking a lot of
assumptions) or we'd reintroduce all the problems we solved back then
by using these two env vars.
This is partly because I didn't document these variables back
then (mea culpa), so I decided to drop all mentions of
`.attrs.{json,sh}` in the manual and only refer to `$NIX_ATTRS_SH_FILE`
and `$NIX_ATTRS_JSON_FILE`. The same applies to all our integration tests.
Theoretically we could deprecated using `"$NIX_BUILD_TOP"/.attrs.sh` in
the future now.
* `nix develop` and `nix print-dev-env` don't support this environment
variable at all even though they're supposed to be part of the replacement
for `nix-shell` - for the drv debugging part to be precise.
This isn't a big deal for the vast majority of derivations, i.e.
derivations relying on nixpkgs' `stdenv` wiring things together
properly. This is because `nix develop` effectively "clones" the
derivation and replaces the builder with a script that dumps all of
the environment, shell variables, functions etc, so the state of
structured attrs being "sourced" is transmitted into the dev shell and
most of the time you don't need to worry about `.attrs.sh` not
existing because the shell is correctly configured and the
if [ -e .attrs.sh ]; then source .attrs.sh; fi
is simply omitted.
However, this will break when having a derivation that reads e.g. from
`.attrs.json` like
with import <nixpkgs> {};
runCommand "foo" { __structuredAttrs = true; foo.bar = 23; } ''
cat $NIX_ATTRS_JSON_FILE # doesn't work because it points to /build/.attrs.json
''
To work around this I employed a similar approach as it exists for
`nix-shell`: the `NIX_ATTRS_{JSON,SH}_FILE` vars are replaced with
temporary locations.
The contents of `.attrs.sh` and `.attrs.json` are now written into the
JSON by `get-env.sh`, the builder that `nix develop` injects into the
derivation it's debugging. So finally the exact file contents are
present and exported by `nix develop`.
I also made `.attrs.json` a JSON string in the JSON printed by
`get-env.sh` on purpose because then it's not necessary to serialize
the object structure again. `nix develop` only needs the JSON
as string because it's only written into the temporary file.
I'm not entirely sure if it makes sense to also use a temporary
location for `nix print-dev-env` (rather than just skipping the
rewrite in there), but this would probably break certain cases where
it's relied upon `$NIX_ATTRS_SH_FILE` to exist (prime example are the
`nix print-dev-env` test-cases I wrote in this patch using
`tests/shell.nix`, these would fail because the env var exists, but it
cannot read from it).
[1] https://github.com/NixOS/nix/pull/4770#issuecomment-836799719
* document "Import From Derivation"
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: John Ericson <git@JohnEricson.me>
make the example more realistic, since `headers` is not an output name
used in Nixpkgs
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
derivations are about data transformation, so the term "build" does not
add any information. there was also some feedback that "build task" is
not more helpful than "derivation" if you have no prior experience with
Nix or build systems, while existing associations may be misleading.
Was confused why `make html` didn't work while working on #9032, but
then I realized that after this section was written, the target was
renamed to `manual-html` in 6910f5dcb6.
there is a very confusing warning in the Nixpkgs manual that
mischaracterises `nix-env` behavior, and this example shows what's
really happening.
note that it doesn't use `pkgs.runCommand` or other `pkgs.stdenv`
facilities, as deep down those set `meta.outputsToInstall` to very
particular defaults that do not generally apply to Nix.
We use the same nested map representation we used for goals, again in
order to save space. We might someday want to combine with `inputDrvs`,
by doing `V = bool` instead of `V = std::set<OutputName>`, but we are
not doing that yet for sake of a smaller diff.
The ATerm format for Derivations also needs to be extended, in addition
to the in-memory format. To accomodate this, we added a new basic
versioning scheme, so old versions of Nix will get nice errors. (And
going forward, if the ATerm format changes again the errors will be even
better.)
`parsedStrings`, an internal function used as part of parsing
derivations in A-Term format, used to consume the final `]` but expect
the initial `[` to already be consumed. This made for what looked like
unbalanced brackets at callsites, which was confusing. Now it consumes
both which is hopefully less confusing.
As part of testing, we also created a unit test for the A-Term format for
regular non-experimental derivations too.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Apply suggestions from code review
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
this is a pure reformatting, contents were not changed
one sentence per line makes reviewing diffs and making suggestions much
more convenient. the indentation was an artifat of the DocBook
migration.
Continue with the characterization testing idioms begun in
c70484454f, but this time for unit tests.
Co-authored-by: Andreas Rammhold <andreas@rammhold.de>
In the Nix language, given a drv path, we should be able to construct
another string referencing to one of its output. We can do this today
with `(import drvPath).output`, but this only works for derivations we
already have.
With dynamic derivations, however, that doesn't work well because the
`drvPath` isn't yet built: importing it like would need to trigger IFD,
when the whole point of this feature is to do "dynamic build graph"
without IFD!
Instead, what we want to do is create a placeholder value with the right
string context to refer to the output of the as-yet unbuilt derivation.
A new primop in the language, analogous to `builtins.placeholder` can be
used to create one. This will achieve all the right properties. The
placeholder machinery also will match out the `outPath` attribute for CA
derivations works.
In 60b7121d2c we added that type of
placeholder, and the derived path and string holder changes necessary to
support it. Then in the previous commit we cleaned up the code
(inspiration finally hit me!) to deduplicate the code and expose exactly
what we need. Now, we can wire up the primop trivally!
Part of RFC 92: dynamic derivations (tracking issue #6316)
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
We want to be able to write down `foo.drv^bar.drv^baz`:
`foo.drv^bar.drv` is the dynamic derivation (since it is itself a
derivation output, `bar.drv` from `foo.drv`).
To that end, we create `Single{Derivation,BuiltPath}` types, that are
very similar except instead of having multiple outputs (in a set or
map), they have a single one. This is for everything to the left of the
rightmost `^`.
`NixStringContextElem` has an analogous change, and now can reuse
`SingleDerivedPath` at the top level. In fact, if we ever get rid of
`DrvDeep`, `NixStringContextElem` could be replaced with
`SingleDerivedPath` entirely!
Important note: some JSON formats have changed.
We already can *produce* dynamic derivations, but we can't refer to them
directly. Today, we can merely express building or example at the top
imperatively over time by building `foo.drv^bar.drv`, and then with a
second nix invocation doing `<result-from-first>^baz`, but this is not
declarative. The ethos of Nix of being able to write down the full plan
everything you want to do, and then execute than plan with a single
command, and for that we need the new inductive form of these types.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
When loading a derivation from a JSON, malformed input would trigger
cryptic "assertion failed" errors. Simply replacing calls to `operator []`
with calls to `.at()` was not enough, as this would cause json.execptions
to be printed verbatim.
Display nice error messages instead and give some indication where the
error happened.
*Before:*
```
$ echo 4 | nix derivation add
error: [json.exception.type_error.305] cannot use operator[] with a string argument with number
$ nix derivation show nixpkgs#hello | nix derivation add
Assertion failed: (it != m_value.object->end()), function operator[], file /nix/store/8h9pxgq1776ns6qi5arx08ifgnhmgl22-nlohmann_json-3.11.2/include/nlohmann/json.hpp, line 2135.
$ nix derivation show nixpkgs#hello | jq '.[] | .name = 5' | nix derivation add
error: [json.exception.type_error.302] type must be string, but is object
$ nix derivation show nixpkgs#hello | jq '.[] | .outputs = { out: "/nix/store/8j3f8j-hello" }' | nix derivation add
error: [json.exception.type_error.302] type must be object, but is string
```
*After:*
```
$ echo 4 | nix derivation add
error: Expected JSON of derivation to be of type 'object', but it is of type 'number'
$ nix derivation show nixpkgs#hello | nix derivation add
error: Expected JSON object to contain key 'name' but it doesn't
$ nix derivation show nixpkgs#hello | jq '.[] | .name = 5' | nix derivation add
error: Expected JSON value to be of type 'string' but it is of type 'number'
$ nix derivation show nixpkgs#hello | jq '.[] | .outputs = { out: "/nix/store/8j3f8j-hello" }' | nix derivation add
error:
… while reading key 'outputs'
error: Expected JSON value to be of type 'object' but it is of type 'string'
```
Over the last year or so I've run into several use cases where I need to
parse and/or serialize URLs for use by `builtins.fetchTree` or
`builtins.getFlake`, largely in order to produce _lockfile-like_ files
for lang2nix frameworks or tools which use `nix` internally to drive
builds.
I've gone through the painstaking process of emulating
`nix::FlakeRef::fromAttrs` and `nix::parseFlakeRef` several times with
mixed success; but these are difficult to create and even harder to
maintain if I hope to stay aligned with changes to the real
parser/serializer.
I understand why adding new `builtins` isn't something we want to do
flagrantly. I'm recommending this addition simply because I keep
encountering use cases where I need to parse/serialize these URIs in
`nix` expressions, and I want a reliable solution.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Co-authored-by: John Ericson <git@JohnEricson.me>
* clarify wording on args@ default handling
Most importantly use shorter sentences and emphasize the key point that defaults aren't taken into account
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: John Ericson <git@JohnEricson.me>
this is a how-to guide which should not be in the reference manual.
it also refers to `nix-env`, which should not be the first thing readers
of the reference manual encounter, as it behaves very differently in
spirit from the rest of Nix.
slightly reword the documentation to be more concise and informative.
Grouping our tests should make it easier to understand the intent than
one long poorly-arranged list. It also is convenient for running just
the tests for a specific component when working on that component.
We need at least one test group so this isn't dead code; I decided to
collect the tests for the `ca-derivations` and `dynamic-derivations`
experimental features in groups. Do
```bash
make ca.test-group -jN
```
and
```bash
make dyn-drv.test-group -jN
```
to try running just them.
I originally did this as part of #8397 for being able to just the local
overlay store alone. I am PRing it separately now so we can separate
general infra from new features.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
* Lang now verifies errors and parse output
* Some new miscellaneous tests
* Easy way to update the tests
* Document workflow in manual
* Use `!` not `~` as separater char for sed
It is confusing to use `~` when we are talking about paths and home
directories!
* Test test suite itself (`test/lang-test/infra.sh`)
Additionally, run shellcheck on `tests/lang.sh` to help ensure it is
correct, now that is is more complex.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
This is done in roughly the same way builtin functions are documented.
Also auto-link experimental features for primops, subsuming PR #8371.
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
- Improved API docs from comment
- Exit codes are for `nix-build`, not just `nix-store --release`
- Make note in tests so the magic numbers are not surprising
Picking up where #8387 left off.
Deleting store info corrected (there is a foot-gun in Nix with
`--delete-generations old`!)
Also a few things are cleaned up based on feedback.
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Co-authored-by: Eelco Dolstra <edolstra@gmail.com>
This is generally a fine practice: Putting implementations in headers
makes them harder to read and slows compilation. Unfortunately it is
necessary for templates, but we can ameliorate that by putting them in a
separate header. Only files which need to instantiate those templates
will need to include the header with the implementation; the rest can
just include the declaration.
This is now documenting in the contributing guide.
Also, it just happens that these polymorphic serializers are the
protocol agnostic ones. (Worker and serve protocol have the same logic
for these container types.) This means by doing this general template
cleanup, we are also getting a head start on better indicating which
code is protocol-specific and which code is shared between protocols.
While this is not actually a notion in the implementation, it is
explicitly described in the thesis and quite important for understanding
how the store works.
Co-authored-by: John Ericson <git@JohnEricson.me>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Introduce what substituters "are" in the configuration option entry.
Remove arbitrary line breaks for easier editing in the future.
Link glossary some more.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: John Ericson <git@JohnEricson.me>
packages and configurations are not really a concept in Nix or the Nix language. the idea of transforming files into other files clearly captures what it's all about, and the new phrasing should make the term "derivation" more obvious both in terms of meaning and origin.
Add support to --list-generations
as another way to say
nix-env --profile /nix/var/nix/profiles/per-user/$USER/channels --list-generations
the way we did for nix-channel --rollback [generation id]
