Commit graph

81 commits

Author SHA1 Message Date
Eelco Dolstra
47e185847e Refactor option handling 2014-08-13 03:50:44 +02:00
Eelco Dolstra
f02c52e3d4 Doh 2014-08-05 10:19:57 +02:00
Eelco Dolstra
988bf59421 Move some options out of globals 2014-08-04 18:13:14 +02:00
Eelco Dolstra
d3c61d83be Remove some dead code 2014-07-24 00:00:53 +02:00
Eelco Dolstra
ece531d105 nix-daemon: Less verbosity 2014-07-23 19:43:46 +02:00
Eelco Dolstra
d0fad1779f nix-daemon: Simplify stderr handling 2014-07-23 19:37:40 +02:00
Eelco Dolstra
49fe9592a4 nix-daemon: Use a thread instead of SIGPOLL to catch client disconnects
The thread calls poll() to wait until a HUP (or other error event)
happens on the client connection. If so, it sends SIGINT to the main
thread, which is then cleaned up normally. This is much nicer than
messing around with SIGPOLL.
2014-07-23 19:21:00 +02:00
Eelco Dolstra
ee3c5d7916 Revert old useBuildHook behaviour 2014-07-19 02:25:47 +02:00
Eelco Dolstra
049c0eb49c nix-daemon: Add trusted-users and allowed-users options
‘trusted-users’ is a list of users and groups that have elevated
rights, such as the ability to specify binary caches. It defaults to
‘root’. A typical value would be ‘@wheel’ to specify all users in the
wheel group.

‘allowed-users’ is a list of users and groups that are allowed to
connect to the daemon. It defaults to ‘*’. A typical value would be
‘@users’ to specify the ‘users’ group.
2014-07-17 16:57:07 +02:00
Eelco Dolstra
0c730887c4 nix-daemon: Show name of connecting user 2014-07-17 15:49:33 +02:00
Eelco Dolstra
77c972c898 nix-daemon: Only print connection info if we have SO_PEERCRED 2014-07-17 15:44:51 +02:00
Eelco Dolstra
8f72e702a1 nix-daemon: Fix compat with older clients 2014-07-17 15:23:31 +02:00
Eelco Dolstra
8e9140cfde Refactoring: Move all fork handling into a higher-order function
C++11 lambdas ftw.
2014-07-10 16:58:09 +02:00
Eelco Dolstra
b1beed97a0 Report daemon OOM better
When copying a large path causes the daemon to run out of memory, you
now get:

  error: Nix daemon out of memory

instead of:

  error: writing to file: Broken pipe
2014-06-10 13:45:50 +02:00
Eelco Dolstra
1c2550a2ae boost::shared_ptr -> std::shared_ptr 2014-03-30 00:49:23 +01:00
Eelco Dolstra
3fc056927c Fix tabs 2014-03-18 23:23:55 +01:00
Ludovic Courtès
51800e06de Allow recovery from isValidPath RPCs with an invalid path
Currently, clients cannot recover from an isValidPath RPC with an
invalid path parameter because the daemon closes the connection when
that happens.

More precisely:

  1. in performOp, wopIsValidPath case, ‘readStorePath’ raises an
     ‘Error’ exception;

  2. that exception is caught by the handler in ‘processConnection’;

  3. the handler determines errorAllowed == false, and thus exits after
     sending the message.

This last part is fixed by calling ‘startWork’ early on, as in the patch
below.

The same reasoning could be applied to all the RPCs that take one or
more store paths as inputs, but isValidPath is, by definition, likely to
be passed invalid paths in the first place, so it’s important for this
one to allow recovery.
2014-03-18 23:22:49 +01:00
Eelco Dolstra
f93e97517e Fix -j and other flags when using the daemon 2014-03-17 17:35:11 +01:00
Eelco Dolstra
42eb4afd7a Simplify getting use-ssh-substituter from untrusted users 2014-02-26 13:58:46 +01:00
Eelco Dolstra
28e0742966 Report OOM errors better 2013-10-02 14:34:36 +02:00
Eelco Dolstra
a5fb4b5b7c Fix typo 2013-10-02 14:22:49 +02:00
Eelco Dolstra
a583a2bc59 Run the daemon worker on the same CPU as the client
On a system with multiple CPUs, running Nix operations through the
daemon is significantly slower than "direct" mode:

$ NIX_REMOTE= nix-instantiate '<nixos>' -A system
real    0m0.974s
user    0m0.875s
sys     0m0.088s

$ NIX_REMOTE=daemon nix-instantiate '<nixos>' -A system
real    0m2.118s
user    0m1.463s
sys     0m0.218s

The main reason seems to be that the client and the worker get moved
to a different CPU after every call to the worker.  This patch adds a
hack to lock them to the same CPU.  With this, the overhead of going
through the daemon is very small:

$ NIX_REMOTE=daemon nix-instantiate '<nixos>' -A system
real    0m1.074s
user    0m0.809s
sys     0m0.098s
2013-08-07 14:02:04 +02:00
Ludovic Courtès
212e96f39c Leave `HAVE_HUP_NOTIFICATION' undefined on GNU/Hurd. 2013-07-07 13:21:06 +02:00
Eelco Dolstra
6b05f688ee nix-daemon: Trust options like binary-caches when the client is root
Fixes #127.
2013-06-12 12:10:26 +02:00
Eelco Dolstra
934cf2d1f4 Nix daemon: respect build timeout from the client 2013-04-23 16:59:06 +02:00
Eelco Dolstra
bdd4646338 Revert "Prevent config.h from being clobbered"
This reverts commit 28bba8c44f.
2013-03-08 01:24:59 +01:00
Eelco Dolstra
28bba8c44f Prevent config.h from being clobbered 2013-03-07 23:55:55 +01:00
Ludovic Courtès
3e067ac11c Add `Settings::nixDaemonSocketFile'. 2013-02-19 10:19:18 +01:00
Eelco Dolstra
2754a07ead nix-store -q --roots: Respect the gc-keep-outputs/gc-keep-derivations settings
So if a path is not garbage solely because it's reachable from a root
due to the gc-keep-outputs or gc-keep-derivations settings, ‘nix-store
-q --roots’ now shows that root.
2012-12-20 18:41:44 +01:00
Eelco Dolstra
8541d27fce Don't use std::cerr in a few places
Slightly scared of using std::cerr in a vforked process...
2012-11-15 15:01:02 +01:00
Eelco Dolstra
e35d6f78dc Rename nix-worker to nix-daemon 2012-10-03 17:59:23 -04:00
Renamed from src/nix-worker/nix-worker.cc (Browse further)