macOS Ventura ships with it's own version of diff. Try to output a
similar diff with Apple diff as with GNU diff, instead of failing
Helps https://github.com/NixOS/nix/issues/7286
For brand new installations, neither NIX_LINK_NEW
(`$XDG_STATE_HOME/nix/profile` or `~/.local/state/nix/profile`), nor
NIX_LINK (`~/.nix-profile`) will exist.
This restores functionality to nix-env, which is relied upon by GitHub
Actions such as https://github.com/cachix/cachix-action and the Nixpkgs
EditorConfig (and other) CI.
One of our CI machines installs Nix via the official script and then
sources the nix-profile.sh script to setup the environment. However, it
doesn't have XDG_STATE_HOME set, which causes sourcing the script to
fail.
XDG Base Directory is a standard for locations for storing various
files. Nix has a few files which seem to fit in the standard, but
currently use a custom location directly in the user's ~, polluting
it:
- ~/.nix-profile
- ~/.nix-defexpr
- ~/.nix-channels
This commit adds a config option (use-xdg-base-directories) to follow
the XDG spec and instead use the following locations:
- $XDG_STATE_HOME/nix/profile
- $XDG_STATE_HOME/nix/defexpr
- $XDG_STATE_HOME/nix/channels
If $XDG_STATE_HOME is not set, it is assumed to be ~/.local/state.
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
Co-authored-by: Tim Fenney <kodekata@gmail.com>
Co-authored-by: pasqui23 <pasqui23@users.noreply.github.com>
Co-authored-by: Artturin <Artturin@artturin.com>
Co-authored-by: John Ericson <Ericson2314@Yahoo.com>
Among all the characters that are allowed in a URL, both the percentage
sign "%" and the single quotation mark "'" needs escaping when written
as a environment variable in a systemd service file. While the single
quotation mark may be rare, the percentage sign is widely used to escape
characters in a URL. This is especially common in proxy setting, where
username and password may contain special characters that need
percentage escaping. This patch applies the following replacements:
% -> %%
' -> \'
If there was a prior nix installation that created this backup file and
then you tried to install it again, it would stop to tell you there is
this file. But if the file and its backup are identical in content,
there is no harm in continuing and in a later step overwriting the
existing backup file with the identical one. This is just a convenience
feature.
The `fish_add_path` function is only available for fish 3.2.0 or newer,
and not on older versions.
This commit adds an alternative way to update the PATH when
`fish_add_path` does not exist.
being too specific about it requires more maintenance (or otherwise
produced more confusion and churn), since these points of contact change
over time.
Previously the MANPATH was set even if MANPATH was empty beforehand
which resulted in a MANPATH of only ~/.nix-profile/share/man which
omitted the default man page directory (commonly /opt/local/share/man)
from man page results.
Older versions of Fish (such as those bundled with Ubuntu LTS 22.04) do
not support return outside of functions. We need to use the equivalent
exit instead.
Before this patch, installing Nix using the Fish shell did not
work because Fish wasn't configured to add Nix to the PATH. Some
options in #1512 offered workarounds, but they typically involve
extra plugins or packages.
This patch adds native, out-of-the-box support for the Fish shell.
Note that Fish supports a `conf.d` directory, which is intended
for exactly use cases like this: software projects distributing
shell snippets. This patch takes advantage of it. The installer
doesn't append any Nix loader behavior to any Fish config file.
Because of that, the uninstall process is smooth and a reinstall
obliterates the existing nix.fish files that we place instead of
bothering the user with a backup / manual removal.
Both single-user and multi-user cases are covered. It has been
tested on Ubuntu, and a Mac with MacPorts, homebrew, and the
Fish installer pkg.
Closes#1512
Co-authored-by: Graham Christensen <graham@grahamc.com>
A [recent-ish change](https://github.com/NixOS/nix/pull/6676) logs a warning when a potentially counterintuitive situation happens.
This now causes the multi-user installer to [emit a warning](https://github.com/NixOS/nixpkgs/issues/189043) when it's doing
the "seed the Nix database" step via a low-level `nix-store --load-db` invocation.
`nix-store` functionality implementations don't actually use profiles or channels or homedir as far as i can tell. So why are we
hitting this code at all?
Well, the current command approach for functionality here builds a [fat `nix` binary](https://github.com/NixOS/nix/blob/master/src/nix/local.mk#L23-L26) which has _all_ the functionality of
previous individual binaries (nix-env, nix-store, etc) bundled in, then [uses the invocation name](https://github.com/NixOS/nix/blob/master/src/nix/main.cc#L274-L277) to select the
set of commands to expose. `nix` itself has this behavior, even when just trying to parse the (sub)command and arguments:
```
dave @ davembp2
$ nix
error: no subcommand specified
Try 'nix --help' for more information.
dave @ davembp2
$ sudo nix
warning: $HOME ('/Users/dave') is not owned by you, falling back to the one defined in the 'passwd' file
error: no subcommand specified
Try 'nix --help' for more information.
dave @ davembp2
$ HOME=~root sudo nix
error: no subcommand specified
Try 'nix --help' for more information.
```
This behavior can also be seen pretty easily with an arbitrary `nix-store` invocation:
```
dave @ davembp2
$ nix-store --realize
dave @ davembp2
$ sudo nix-store --realize # what installer is doing now
warning: $HOME ('/Users/dave') is not owned by you, falling back to the one defined in the 'passwd' file
dave @ davembp2
$ sudo HOME=~root nix-store --realize # what this PR effectively does
dave @ davembp2
$
```
User on Matrix reported install problems which presented as
"vifs:editing error" which we traced back to vim griping about an
existing swap file. When opened interactively, it did this:
E325: ATTENTION
Found a swap file by the name "/etc/.fstab.swp"
owned by: root dated: Sön Apr 24 16:54:10 2022
file name: /private/etc/fstab
modified: YES
user name: root host name: MBP.local
process ID: 1698
While opening file "/etc/fstab"
dated: Sön Apr 24 16:56:27 2022
NEWER than swap file!
...
On Linux a user can go through all the way through the multi-user install
and find out at the end that they now have to manually configure their
init system to launch the nix daemon.
I suspect that for a significant number of users this is not
what they wanted. They might prefer a single-user install.
Now they have to manually uninstall nix before they can
go through the single-user install.
This introduces a confirmation dialog before the install
in that specific situation to make sure that they want to proceed.
See also: https://github.com/NixOS/nix/issues/4999#issuecomment-1064188080
This closes#4999 but rejecting it and closing that issue anyways
would also be valid.
While `create_directories()` from install-multi-user.sh seems to already
create parts of the directory structure, it's marked as deprecated, and
it won't hurt also copying over the tmpfiles config and have it execute
once.
Same as 1fd127a068, but applied to a
code path (volume_pass_works -> verify_volume_pass) that the reporting
user didn't hit and wasn't able to trigger manually. I am not certain
but I suspect it will be easier to add prophylactically than to debug
if its absence causes trouble some day.
While trying to figure out how `nix-env`/`nix profile` work I had a hard
time understand how man pages were being installed.
Took me quite some time to figure this out, thought it might be useful
to others too!
Fixes#6122, which reports a problem with trying to run the installer
under another user (probably: user is not the disk "owner" and thus
can't mount the volume).
The script is trying to find chown in a cross-platform-like
way, but there's some sort of deficiency in `command -p` in
the default macOS bash 3.2. It looks like it will just use
whatever PATH is already set, instead of the "default" path.
This attempts to hard-set a PATH via `getconf PATH`. It will
just set an empty PATH if that fails for some reason. A
properly-functioning `command -p` should not care what we
set the PATH to here one way or the other.
Hopefully fixes#5768.
Same purpose as de9efa3b79af7886fcf2a67b6ce97d4f96a57421
For some unclear reason, we get occasional reports from people who do
not have /usr/sbin on their PATH that the installer fails. It's a
standard part of the PATH, so I have no clue what they're doing to
remove it--but it's also fairly cheap to avoid.
Add a regular github action that will check the status of the latest
hydra evaluation.
Things aren’t ideal right now because this job will only notify “the
user who last modified the cron syntax in the workflow file” (so myself
atm). But at least that’ll give a notification for failing hydra jobs
We had a macOS user present in Matrix with some confusion because the
lack of a clear task statement here made them think the error meant
that a problem had occurred during the preceding task in a macOS
install: "Fixing any leftover Nix volume state"
This adds an explicit unmount of the store volume to avoid cases
where the installer can hang in await_volume when:
- the user already has a store volume
- that volume is already mounted somewhere other than /nix
- they do not take a path through the installer that results in an
explicit unmount (as both removing and encrypting the volume
would do)
ShellCheck correctly warns:
In scripts/install-nix-from-closure.sh line 218:
echo -e "\nif [ -e $p ]; then . $p; fi # added by Nix installer" >> "$fn"
^-- SC3037: In POSIX sh, echo flags are undefined.
In scripts/install-nix-from-closure.sh line 229:
echo -e "\nif [ -e $p ]; then . $p; fi # added by Nix installer" >> "$fn"
^-- SC3037: In POSIX sh, echo flags are undefined.
Indeed, this actually breaks on Ubuntu where /bin/sh is dash.
Fixes#5458.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
As reported in #5198, volume creation can fail with a permission error
for some macOS users (probably secondary user accounts?) Sudo appears
to be sufficient to avoid this.
While I'm here, I also updated the sudo invocation added in 079bde2ae
to use the _sudo explanation wrapper.
This reverts commit 909d8cb293.
This messes up PATH priority since /etc/profile gets sourced AFTER
/etc/zshenv and it sets the system paths so
$HOME/.nix-profile/bin:/nix/var/nix/profiles/default/bin is behind
/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin. See discussion in
https://github.com/NixOS/nix/issues/4169.
When commit 233b61d3d6 (#4224) renamed
@binaryTarball_${system}@ to @tarballHash_${system}@, it updated this
reference for every platform except Darwin.arm64.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
While the progress dots during the copying of the store work fine on a
normal terminal, those look pretty off if the script is run inside a
provisioning script of e.g. `vagrant` or `packer` where `stderr` and
`stdout` are captured:
default: .
default: ..
default: .
default: .
default: .
To work around this, the script checks with `-t 0` if it's
running on an actual terminal and doesn't show the progress if that's not
the case.
