TransferManager allocates a lot of memory (50 MiB by default), and it
might leak but I'm not sure about that. In any case it was causing
OOMs in hydra-queue-runner. So allocate only one TransferManager per
S3BinaryCacheStore.
Hopefully fixes https://github.com/NixOS/hydra/issues/586.
This callback is executed on a different thread, so exceptions thrown
from the callback are not caught:
Aug 08 16:25:48 chef hydra-queue-runner[11967]: terminate called after throwing an instance of 'nix::Error'
Aug 08 16:25:48 chef hydra-queue-runner[11967]: what(): AWS error: failed to upload 's3://nix-cache/19dbddlfb0vp68g68y19p9fswrgl0bg7.ls'
Therefore, just check the transfer status after it completes. Also
include the S3 error message in the exception.
This didn't work anymore since decompression was only done in the
non-coroutine case.
Decompressors are now sinks, just like compressors.
Also fixed a bug in bzip2 API handling (we have to handle BZ_RUN_OK
rather than BZ_OK), which we didn't notice because there was a missing
'throw':
if (ret != BZ_OK)
CompressionError("error while compressing bzip2 file");
It adds a new operation, cmdAddToStoreNar, that does the same thing as
the corresponding nix-daemon operation, i.e. call addToStore(). This
replaces cmdImportPaths, which has the major issue that it sends the
NAR first and the store path second, thus requiring us to store the
incoming NAR either in memory or on disk until we decide what to do
with it.
For example, this reduces the memory usage of
$ nix copy --to 'ssh://localhost?remote-store=/tmp/nix' /nix/store/95cwv4q54dc6giaqv6q6p4r02ia2km35-blender-2.79
from 267 MiB to 12 MiB.
Probably fixes#1988.
In EvalState::checkSourcePath, the path is checked against the list of
allowed paths first and later it's checked again *after* resolving
symlinks.
The resolving of the symlinks is done via canonPath, which also strips
out "../" and "./". However after the canonicalisation the error message
pointing out that the path is not allowed prints the symlink target in
the error message.
Even if we'd suppress the message, symlink targets could still be leaked
if the symlink target doesn't exist (in this case the error is thrown in
canonPath).
So instead, we now do canonPath() without symlink resolving first before
even checking against the list of allowed paths and then later do the
symlink resolving and checking the allowed paths again.
The first call to canonPath() should get rid of all the "../" and "./",
so in theory the only way to leak a symlink if the attacker is able to
put a symlink in one of the paths allowed by restricted evaluation mode.
For the latter I don't think this is part of the threat model, because
if the attacker can write to that path, the attack vector is even
larger.
Signed-off-by: aszlig <aszlig@nix.build>
This particular `shell` variable wasn't used, since a new one was
declared in the only side of the `if` branch that used a `shell`
variable.
It could realistically confuse developers thinking it could use `$SHELL`
under some situations.
forceValue() were called after a value is copied effectively forcing only one of the copies keeping another copy not evaluated.
This resulted in its evaluation of the same lazy value more than once (the number of hits is not big though)
Not ready for this yet, causes the prompt to disappear in nix repl
and more generally can overwrite non-progress-bar messages.
This reverts commit 44de71a396.
Before:
$ command time nix-prefetch-url https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.17.6.tar.xz
1.19user 1.02system 0:41.96elapsed 5%CPU (0avgtext+0avgdata 182720maxresident)k
After:
1.38user 1.05system 0:39.73elapsed 6%CPU (0avgtext+0avgdata 16204maxresident)k
Note however that addToStore() can still take a lot of memory
(e.g. RemoteStore::addToStore() is constant space, but
LocalStore::addToStore() isn't; that's fixed by
c94b4fc7ee
though).
Fixes#1400.
For example, this allows you to do run nix-daemon as a non-privileged
user:
eelco$ NIX_STATE_DIR=~/my-nix/nix/var nix-daemon --store ~/my-nix/
The NIX_STATE_DIR is still needed because settings.nixDaemonSocketFile
is not derived from settings.storeUri (and we can't derive it from the
store's state directory because we don't want to open the store in the
parent process).
As proposed in #1634 the `nix search` command could use some
improvements. Initially 0413aeb35d added
some basic sorting behavior using `std::map`, a next step would be an
improvement of the output.
This patch includes the following changes:
* Use `$PAGER` for outputs with `RunPager` from `shared.hh`:
The same behavior is defined for `nix-env --query`, furthermore it
makes searching huge results way easier.
* Simplified result blocks:
The new output is heavily inspired by the output from `nox`, the first
line shows the attribute path and the derivaiton name
(`attribute path (derivation name)`) and the description in the second
line.
Slightly nicer behavior when updates are somewhat far apart
(during a long linking step, perhaps) ensuring things
don't appear unresponsive.
If we wait the maximum amount for the update,
don't bother waiting another 50ms (for rate-limiting purposes)
and just check if we should quit.
This also ensures we'll notice the request to quit within 1s
if quit is signalled but there is not an udpate.
(I'm not sure if this happens or not)
I hate to make this such a large check but the lack of documentation means we really have no idea what's allowed. All of them reported so far have been within ".app/Contents" directories. That appears to be a safe starting point. However, I would not be surprised to also find more paths that are disallowed for instance in .framework or .bundle directories.
Fixes#2031Fixes#2229
This makes 'nix copy' and 'nix path-info' work on .drv store
paths. Removing special treatment of .drv files seems the most
future-proof approach given the possible removal of .drv files in the
future.
Note that 'nix build' will still build (rather than substitute) .drv
paths due to the unfortunate overloading in Store::buildPaths().
EvalState contains a few counters (e.g. nrValues) that increase
quickly enough that they end up being interpreted as pointers by the
garbage collector. Moving it to the heap makes them invisible to the
garbage collector.
This reduces the max RSS doing 100 evaluations of
nixos.tests.firefox.x86_64-linux.drvPath from 455 MiB to 292 MiB.
Note: ideally, allocations would be much further up in the 64-bit
address space to reduce the odds of an integer being misinterpreted as
a pointer. Maybe we can use some linker magic to move the .bss segment
to a higher address.
This reduces the risk of object liveness misdetection. For example,
Glibc has an internal variable "mp_" that often points to a Boehm
object, keeping it alive unnecessarily. Since we don't store any
actual roots in global variables, we can just disable data segment
scanning.
With this, the max RSS doing 100 evaluations of
nixos.tests.firefox.x86_64-linux.drvPath went from 718 MiB to 455 MiB.
If a process disappears between the time /proc/[pid]/maps is opened and
the time it is read, the read() syscall will return ESRCH. This should be ignored.
In some versions/configurations libcurl doesn't handle timeouts
(especially DNS timeouts) in a way that wakes curl_multi_wait.
This doesn't appear to be a problem if using c-ares, FWIW.
This reduces memory consumption of
nix copy --from file://... --to ~/my-nix /nix/store/95cwv4q54dc6giaqv6q6p4r02ia2km35-blender-2.79
from 514 MiB to 18 MiB for an uncompressed binary cache, and from 192
MiB to 53 MiB for a bzipped binary cache. It may also be faster
because fetching can happen concurrently with decompression/writing.
Continuation of 48662d151b.
Issue https://github.com/NixOS/nix/issues/1681.
Allow global config settings to be defined in multiple Config
classes. For example, this means that libutil can have settings and
evaluator settings can be moved out of libstore. The Config classes
are registered in a new GlobalConfig class to which config files
etc. are applied.
Relevant to https://github.com/NixOS/nix/issues/2009 in that it
removes the need for ad hoc handling of useCaseHack, which was the
underlying cause of that issue.
Continuation of 97002b684c. This makes
the daemon use constant memory. For example, it reduces the daemon's
maximum RSS on
$ nix copy --from ~/my-nix --to daemon /nix/store/1n7x0yv8vq6zi90hfmian84vdhd04bgp-blender-2.79a
from 264 MiB to 7 MiB.
We now use a TunnelSource to prevent the connection from ending up in
an undefined state if an exception is thrown while the NAR is being
sent.
Issue https://github.com/NixOS/nix/issues/1681.
If the Env denotes a 'with', then values[0] may be an Expr* cast to a
Value*. For code that generically traverses Values/Envs, it's useful
to know this.
E.g. this makes
nix eval --restrict-eval -I /nix/store/foo '(builtins.readFile "/nix/store/foo/symlink/bla")'
(where /nix/store/foo/symlink is a symlink to another path in the
closure of /nix/store/foo) succeed.
This fixes a regression in Hydra compared to Nix 1.x (where there were
no restrictions at all on access to the Nix store).
The existing ordering linked `libutil` before `libstore`, which causes
link failures when building statically. This is due to `libstore` using
functions from `libutil`, and the fact that symbol resolution works
"forward" - i.e. if you pass `-lfoo -lbar -lbaz`, any symbols that
`libbar` uses from `libbaz` will be resolved, but symbols from `libfoo`
will not since it comes first in the command line.
All this to say: this commit reorders the libraries which fixes the link
errors.
Don't bind-mount these to themselves,
mount them into the chroot directory.
Fixes pty issues when using sandbox on CentOS 7.4.
(build of perlPackages.IOTty fails before this change)
The common use case is to search for packages containing multiple words
like a "git" "frontend". Having only one expressions makes this simple regular
use case very complicated. Instead, search accepts multiple regular epressions
which all need to match.
nix search git 'gui|frontend'
returns a list of all git uis for example
Fixes
error: getting status of '/nix/store/j8p0vv89k1pf0cn7kmfsdcs7bshwga1i-firefox-52.7.2esr/share/icons/hicolor/48x48/apps/firefox.png': No such file or directory
https://github.com/NixOS/nix/issues/1934
Also improve error message on directory/non-directory collisions.
For instance, this reduced the memory consumption of
$ nix copy --from ssh://localhost --to ~/my-nix /nix/store/1n7x0yv8vq6zi90hfmian84vdhd04bgp-blender-2.79a
from 632 MiB to 16 MiB.
From exec(3):
> The list of arguments must be terminated by a null pointer, and, since these
> are variadic functions, this pointer must be cast (char *) NULL
E.g.
cannot build on 'ssh://mac1': cannot connect to 'mac1': bash: nix-store: command not found
cannot build on 'ssh://mac2': cannot connect to 'mac2': Host key verification failed.
cannot build on 'ssh://mac3': cannot connect to 'mac3': Received disconnect from 213... port 6001:2: Too many authentication failures
Authentication failed.
copyStorePath() now pipes the output of srcStore->narFromPath()
directly into dstStore->addToStore(). The sink used by the former is
converted into a source usable by the latter using
boost::coroutine2. This is based on [1].
This reduces the maximum resident size of
$ nix build --store ~/my-nix/ /nix/store/b0zlxla7dmy1iwc3g459rjznx59797xy-binutils-2.28.1 --substituters file:///tmp/binary-cache-xz/ --no-require-sigs
from 418592 KiB to 53416 KiB. (The previous commit also reduced the
runtime from ~4.2s to ~3.4s, not sure why.) A further improvement will
be to download files into a Sink.
[1] https://github.com/NixOS/nix/compare/master...Mathnerd314:dump-fix-coroutine#diff-dcbcac55a634031f9cc73707da6e4b18
Issue #1969.
It was holding on to a Value* (i.e. a std::shared_ptr<ValidPathInfo>*)
outside of the pathInfoCache lock, so the std::shared_ptr could be
destroyed between the release of the lock and the decrement of the
std::shared_ptr refcount. This can happen if more than
'path-info-cache-size' paths are added in the meantime, *or* if
clearPathInfoCache() is called. The hydra-queue-runner queue monitor
thread periodically calls the later, so is likely to trigger a crash.
Fixes https://github.com/NixOS/hydra/issues/542.
Doing so prevents emacs tags from working, as well as makes the code extremely
confusing for a newbie.
In the prior state, if someone wants to find the definition of "ExprApp" for
example, a grep through the code reveals nothing. Since the definition could be
hiding in numerous ".h" files, it's really difficult to find. This personally
took me several hours to figure out.
