# Built-in Functions This section lists the functions and constants built into the Nix expression evaluator. (The built-in function `derivation` is discussed above.) Some built-ins, such as `derivation`, are always in scope of every Nix expression; you can just access them right away. But to prevent polluting the namespace too much, most built-ins are not in scope. Instead, you can access them through the `builtins` built-in value, which is a set that contains all built-in functions and values. For instance, `derivation` is also available as `builtins.derivation`. - `builtins.add` *e1* *e2* Return the sum of the numbers *e1* and *e2*. - `builtins.all` *pred* *list* Return `true` if the function *pred* returns `true` for all elements of *list*, and `false` otherwise. - `builtins.any` *pred* *list* Return `true` if the function *pred* returns `true` for at least one element of *list*, and `false` otherwise. - `builtins.attrNames` *set* Return the names of the attributes in the set *set* in an alphabetically sorted list. For instance, `builtins.attrNames { y = 1; x = "foo"; }` evaluates to `[ "x" "y" ]`. - `builtins.attrValues` *set* Return the values of the attributes in the set *set* in the order corresponding to the sorted attribute names. - `baseNameOf` *s* Return the *base name* of the string *s*, that is, everything following the final slash in the string. This is similar to the GNU `basename` command. - `builtins.bitAnd` *e1* *e2* Return the bitwise AND of the integers *e1* and *e2*. - `builtins.bitOr` *e1* *e2* Return the bitwise OR of the integers *e1* and *e2*. - `builtins.bitXor` *e1* *e2* Return the bitwise XOR of the integers *e1* and *e2*. - `builtins` The set `builtins` contains all the built-in functions and values. You can use `builtins` to test for the availability of features in the Nix installation, e.g., ```nix if builtins ? getEnv then builtins.getEnv "PATH" else "" ``` This allows a Nix expression to fall back gracefully on older Nix installations that don’t have the desired built-in function. - `builtins.compareVersions` *s1* *s2* Compare two strings representing versions and return `-1` if version *s1* is older than version *s2*, `0` if they are the same, and `1` if *s1* is newer than *s2*. The version comparison algorithm is the same as the one used by [`nix-env -u`](../command-ref/nix-env.md#operation---upgrade). - `builtins.concatLists` *lists* Concatenate a list of lists into a single list. - `builtins.concatStringsSep` *separator* *list* Concatenate a list of strings with a separator between each element, e.g. `concatStringsSep "/" ["usr" "local" "bin"] == "usr/local/bin"` - `builtins.currentSystem` The built-in value `currentSystem` evaluates to the Nix platform identifier for the Nix installation on which the expression is being evaluated, such as `"i686-linux"` or `"x86_64-darwin"`. - `builtins.deepSeq` *e1* *e2* This is like `seq e1 e2`, except that *e1* is evaluated *deeply*: if it’s a list or set, its elements or attributes are also evaluated recursively. - `derivation` *attrs*; `builtins.derivation` *attrs* `derivation` is described in [its own section](derivations.md). - `dirOf` *s*; `builtins.dirOf` *s* Return the directory part of the string *s*, that is, everything before the final slash in the string. This is similar to the GNU `dirname` command. - `builtins.div` *e1* *e2* Return the quotient of the numbers *e1* and *e2*. - `builtins.elem` *x* *xs* Return `true` if a value equal to *x* occurs in the list *xs*, and `false` otherwise. - `builtins.elemAt` *xs* *n* Return element *n* from the list *xs*. Elements are counted starting from 0. A fatal error occurs if the index is out of bounds. - `builtins.fetchurl` *url* Download the specified URL and return the path of the downloaded file. This function is not available if [restricted evaluation mode](../command-ref/conf-file.md) is enabled. - `fetchTarball` *url*; `builtins.fetchTarball` *url* Download the specified URL, unpack it and return the path of the unpacked tree. The file must be a tape archive (`.tar`) compressed with `gzip`, `bzip2` or `xz`. The top-level path component of the files in the tarball is removed, so it is best if the tarball contains a single directory at top level. The typical use of the function is to obtain external Nix expression dependencies, such as a particular version of Nixpkgs, e.g. ```nix with import (fetchTarball https://github.com/NixOS/nixpkgs/archive/nixos-14.12.tar.gz) {}; stdenv.mkDerivation { … } ``` The fetched tarball is cached for a certain amount of time (1 hour by default) in `~/.cache/nix/tarballs/`. You can change the cache timeout either on the command line with `--option tarball-ttl number of seconds` or in the Nix configuration file with this option: ` number of seconds to cache `. Note that when obtaining the hash with ` nix-prefetch-url ` the option `--unpack` is required. This function can also verify the contents against a hash. In that case, the function takes a set instead of a URL. The set requires the attribute `url` and the attribute `sha256`, e.g. ```nix with import (fetchTarball { url = "https://github.com/NixOS/nixpkgs/archive/nixos-14.12.tar.gz"; sha256 = "1jppksrfvbk5ypiqdz4cddxdl8z6zyzdb2srq8fcffr327ld5jj2"; }) {}; stdenv.mkDerivation { … } ``` This function is not available if [restricted evaluation mode](../command-ref/conf-file.md) is enabled. - `builtins.fetchGit` *args* Fetch a path from git. *args* can be a URL, in which case the HEAD of the repo at that URL is fetched. Otherwise, it can be an attribute with the following attributes (all except `url` optional): - url The URL of the repo. - name The name of the directory the repo should be exported to in the store. Defaults to the basename of the URL. - rev The git revision to fetch. Defaults to the tip of `ref`. - ref The git ref to look for the requested revision under. This is often a branch or tag name. Defaults to `HEAD`. By default, the `ref` value is prefixed with `refs/heads/`. As of Nix 2.3.0 Nix will not prefix `refs/heads/` if `ref` starts with `refs/`. - submodules A Boolean parameter that specifies whether submodules should be checked out. Defaults to `false`. Here are some examples of how to use `fetchGit`. - To fetch a private repository over SSH: ```nix builtins.fetchGit { url = "git@github.com:my-secret/repository.git"; ref = "master"; rev = "adab8b916a45068c044658c4158d81878f9ed1c3"; } ``` - To fetch an arbitrary reference: ```nix builtins.fetchGit { url = "https://github.com/NixOS/nix.git"; ref = "refs/heads/0.5-release"; } ``` - If the revision you're looking for is in the default branch of the git repository you don't strictly need to specify the branch name in the `ref` attribute. However, if the revision you're looking for is in a future branch for the non-default branch you will need to specify the the `ref` attribute as well. ```nix builtins.fetchGit { url = "https://github.com/nixos/nix.git"; rev = "841fcbd04755c7a2865c51c1e2d3b045976b7452"; ref = "1.11-maintenance"; } ``` > **Note** > > It is nice to always specify the branch which a revision > belongs to. Without the branch being specified, the fetcher > might fail if the default branch changes. Additionally, it can > be confusing to try a commit from a non-default branch and see > the fetch fail. If the branch is specified the fault is much > more obvious. - If the revision you're looking for is in the default branch of the git repository you may omit the `ref` attribute. ```nix builtins.fetchGit { url = "https://github.com/nixos/nix.git"; rev = "841fcbd04755c7a2865c51c1e2d3b045976b7452"; } ``` - To fetch a specific tag: ```nix builtins.fetchGit { url = "https://github.com/nixos/nix.git"; ref = "refs/tags/1.9"; } ``` - To fetch the latest version of a remote branch: ```nix builtins.fetchGit { url = "ssh://git@github.com/nixos/nix.git"; ref = "master"; } ``` > **Note** > > Nix will refetch the branch in accordance with > the option `tarball-ttl`. > **Note** > > This behavior is disabled in *Pure evaluation mode*. - `builtins.filter` *f* *xs* Return a list consisting of the elements of *xs* for which the function *f* returns `true`. - `builtins.filterSource` *e1* *e2* This function allows you to copy sources into the Nix store while filtering certain files. For instance, suppose that you want to use the directory `source-dir` as an input to a Nix expression, e.g. ```nix stdenv.mkDerivation { ... src = ./source-dir; } ``` However, if `source-dir` is a Subversion working copy, then all those annoying `.svn` subdirectories will also be copied to the store. Worse, the contents of those directories may change a lot, causing lots of spurious rebuilds. With `filterSource` you can filter out the `.svn` directories: ```nix src = builtins.filterSource (path: type: type != "directory" || baseNameOf path != ".svn") ./source-dir; ``` Thus, the first argument *e1* must be a predicate function that is called for each regular file, directory or symlink in the source tree *e2*. If the function returns `true`, the file is copied to the Nix store, otherwise it is omitted. The function is called with two arguments. The first is the full path of the file. The second is a string that identifies the type of the file, which is either `"regular"`, `"directory"`, `"symlink"` or `"unknown"` (for other kinds of files such as device nodes or fifos — but note that those cannot be copied to the Nix store, so if the predicate returns `true` for them, the copy will fail). If you exclude a directory, the entire corresponding subtree of *e2* will be excluded. - `builtins.foldl’` *op* *nul* *list* Reduce a list by applying a binary operator, from left to right, e.g. `foldl’ op nul [x0 x1 x2 ...] = op (op (op nul x0) x1) x2) ...`. The operator is applied strictly, i.e., its arguments are evaluated first. For example, `foldl’ (x: y: x + y) 0 [1 2 3]` evaluates to 6. - `builtins.functionArgs` *f* Return a set containing the names of the formal arguments expected by the function *f*. The value of each attribute is a Boolean denoting whether the corresponding argument has a default value. For instance, `functionArgs ({ x, y ? 123}: ...) = { x = false; y = true; }`. "Formal argument" here refers to the attributes pattern-matched by the function. Plain lambdas are not included, e.g. `functionArgs (x: ...) = { }`. - `builtins.fromJSON` *e* Convert a JSON string to a Nix value. For example, ```nix builtins.fromJSON ''{"x": [1, 2, 3], "y": null}'' ``` returns the value `{ x = [ 1 2 3 ]; y = null; }`. - `builtins.genList` *generator* *length* Generate list of size *length*, with each element *i* equal to the value returned by *generator* `i`. For example, ```nix builtins.genList (x: x * x) 5 ``` returns the list `[ 0 1 4 9 16 ]`. - `builtins.getAttr` *s* *set* `getAttr` returns the attribute named *s* from *set*. Evaluation aborts if the attribute doesn’t exist. This is a dynamic version of the `.` operator, since *s* is an expression rather than an identifier. - `builtins.getEnv` *s* `getEnv` returns the value of the environment variable *s*, or an empty string if the variable doesn’t exist. This function should be used with care, as it can introduce all sorts of nasty environment dependencies in your Nix expression. `getEnv` is used in Nix Packages to locate the file `~/.nixpkgs/config.nix`, which contains user-local settings for Nix Packages. (That is, it does a `getEnv "HOME"` to locate the user’s home directory.) - `builtins.hasAttr` *s* *set* `hasAttr` returns `true` if *set* has an attribute named *s*, and `false` otherwise. This is a dynamic version of the `?` operator, since *s* is an expression rather than an identifier. - `builtins.hashString` *type* *s* Return a base-16 representation of the cryptographic hash of string *s*. The hash algorithm specified by *type* must be one of `"md5"`, `"sha1"`, `"sha256"` or `"sha512"`. - `builtins.hashFile` *type* *p* Return a base-16 representation of the cryptographic hash of the file at path *p*. The hash algorithm specified by *type* must be one of `"md5"`, `"sha1"`, `"sha256"` or `"sha512"`. - `builtins.head` *list* Return the first element of a list; abort evaluation if the argument isn’t a list or is an empty list. You can test whether a list is empty by comparing it with `[]`. - `import` *path*; `builtins.import` *path* Load, parse and return the Nix expression in the file *path*. If *path* is a directory, the file ` default.nix ` in that directory is loaded. Evaluation aborts if the file doesn’t exist or contains an incorrect Nix expression. `import` implements Nix’s module system: you can put any Nix expression (such as a set or a function) in a separate file, and use it from Nix expressions in other files. > **Note** > > Unlike some languages, `import` is a regular function in Nix. > Paths using the angle bracket syntax (e.g., `import` *\*) > are [normal path values](language-values.md). A Nix expression loaded by `import` must not contain any *free variables* (identifiers that are not defined in the Nix expression itself and are not built-in). Therefore, it cannot refer to variables that are in scope at the call site. For instance, if you have a calling expression ```nix rec { x = 123; y = import ./foo.nix; } ``` then the following `foo.nix` will give an error: ```nix x + 456 ``` since `x` is not in scope in `foo.nix`. If you want `x` to be available in `foo.nix`, you should pass it as a function argument: ```nix rec { x = 123; y = import ./foo.nix x; } ``` and ```nix x: x + 456 ``` (The function argument doesn’t have to be called `x` in `foo.nix`; any name would work.) - `builtins.intersectAttrs` *e1* *e2* Return a set consisting of the attributes in the set *e2* that also exist in the set *e1*. - `builtins.isAttrs` *e* Return `true` if *e* evaluates to a set, and `false` otherwise. - `builtins.isList` *e* Return `true` if *e* evaluates to a list, and `false` otherwise. - `builtins.isFunction` *e* Return `true` if *e* evaluates to a function, and `false` otherwise. - `builtins.isString` *e* Return `true` if *e* evaluates to a string, and `false` otherwise. - `builtins.isInt` *e* Return `true` if *e* evaluates to an int, and `false` otherwise. - `builtins.isFloat` *e* Return `true` if *e* evaluates to a float, and `false` otherwise. - `builtins.isBool` *e* Return `true` if *e* evaluates to a bool, and `false` otherwise. - `builtins.isPath` *e* Return `true` if *e* evaluates to a path, and `false` otherwise. - `isNull` *e*; `builtins.isNull` *e* Return `true` if *e* evaluates to `null`, and `false` otherwise. > **Warning** > > This function is *deprecated*; just write `e == null` instead. - `builtins.length` *e* Return the length of the list *e*. - `builtins.lessThan` *e1* *e2* Return `true` if the number *e1* is less than the number *e2*, and `false` otherwise. Evaluation aborts if either *e1* or *e2* does not evaluate to a number. - `builtins.listToAttrs` *e* Construct a set from a list specifying the names and values of each attribute. Each element of the list should be a set consisting of a string-valued attribute `name` specifying the name of the attribute, and an attribute `value` specifying its value. Example: ```nix builtins.listToAttrs [ { name = "foo"; value = 123; } { name = "bar"; value = 456; } ] ``` evaluates to ```nix { foo = 123; bar = 456; } ``` - `map` *f* *list*; `builtins.map` *f* *list* Apply the function *f* to each element in the list *list*. For example, ```nix map (x: "foo" + x) [ "bar" "bla" "abc" ] ``` evaluates to `[ "foobar" "foobla" "fooabc" ]`. - `builtins.match` *regex* *str* Returns a list if the [extended POSIX regular expression](http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html#tag_09_04) *regex* matches *str* precisely, otherwise returns `null`. Each item in the list is a regex group. ```nix builtins.match "ab" "abc" ``` Evaluates to `null`. ```nix builtins.match "abc" "abc" ``` Evaluates to `[ ]`. ```nix builtins.match "a(b)(c)" "abc" ``` Evaluates to `[ "b" "c" ]`. ```nix builtins.match "[[:space:]]+([[:upper:]]+)[[:space:]]+" " FOO " ``` Evaluates to `[ "foo" ]`. - `builtins.mul` *e1* *e2* Return the product of the numbers *e1* and *e2*. - `builtins.parseDrvName` *s* Split the string *s* into a package name and version. The package name is everything up to but not including the first dash followed by a digit, and the version is everything following that dash. The result is returned in a set `{ name, version }`. Thus, `builtins.parseDrvName "nix-0.12pre12876"` returns `{ name = "nix"; version = "0.12pre12876"; }`. - `builtins.path` *args* An enrichment of the built-in path type, based on the attributes present in *args*. All are optional except `path`: - path The underlying path. - name The name of the path when added to the store. This can used to reference paths that have nix-illegal characters in their names, like `@`. - filter A function of the type expected by `builtins.filterSource`, with the same semantics. - recursive When `false`, when `path` is added to the store it is with a flat hash, rather than a hash of the NAR serialization of the file. Thus, `path` must refer to a regular file, not a directory. This allows similar behavior to `fetchurl`. Defaults to `true`. - sha256 When provided, this is the expected hash of the file at the path. Evaluation will fail if the hash is incorrect, and providing a hash allows `builtins.path` to be used even when the `pure-eval` nix config option is on. - `builtins.pathExists` *path* Return `true` if the path *path* exists at evaluation time, and `false` otherwise. - `builtins.placeholder` *output* Return a placeholder string for the specified *output* that will be substituted by the corresponding output path at build time. Typical outputs would be `"out"`, `"bin"` or `"dev"`. - `builtins.readDir` *path* Return the contents of the directory *path* as a set mapping directory entries to the corresponding file type. For instance, if directory `A` contains a regular file `B` and another directory `C`, then `builtins.readDir ./A` will return the set ```nix { B = "regular"; C = "directory"; } ``` The possible values for the file type are `"regular"`, `"directory"`, `"symlink"` and `"unknown"`. - `builtins.readFile` *path* Return the contents of the file *path* as a string. - `removeAttrs` *set* *list*; `builtins.removeAttrs` *set* *list* Remove the attributes listed in *list* from *set*. The attributes don’t have to exist in *set*. For instance, ```nix removeAttrs { x = 1; y = 2; z = 3; } [ "a" "x" "z" ] ``` evaluates to `{ y = 2; }`. - `builtins.replaceStrings` *from* *to* *s* Given string *s*, replace every occurrence of the strings in *from* with the corresponding string in *to*. For example, ```nix builtins.replaceStrings ["oo" "a"] ["a" "i"] "foobar" ``` evaluates to `"fabir"`. - `builtins.seq` *e1* *e2* Evaluate *e1*, then evaluate and return *e2*. This ensures that a computation is strict in the value of *e1*. - `builtins.sort` *comparator* *list* Return *list* in sorted order. It repeatedly calls the function *comparator* with two elements. The comparator should return `true` if the first element is less than the second, and `false` otherwise. For example, ```nix builtins.sort builtins.lessThan [ 483 249 526 147 42 77 ] ``` produces the list `[ 42 77 147 249 483 526 ]`. This is a stable sort: it preserves the relative order of elements deemed equal by the comparator. - `builtins.split` *regex* *str* Returns a list composed of non matched strings interleaved with the lists of the [extended POSIX regular expression](http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html#tag_09_04) *regex* matches of *str*. Each item in the lists of matched sequences is a regex group. ```nix builtins.split "(a)b" "abc" ``` Evaluates to `[ "" [ "a" ] "c" ]`. ```nix builtins.split "([ac])" "abc" ``` Evaluates to `[ "" [ "a" ] "b" [ "c" ] "" ]`. ```nix builtins.split "(a)|(c)" "abc" ``` Evaluates to `[ "" [ "a" null ] "b" [ null "c" ] "" ]`. ```nix builtins.split "([[:upper:]]+)" " FOO " ``` Evaluates to `[ " " [ "FOO" ] " " ]`. - `builtins.splitVersion` *s* Split a string representing a version into its components, by the same version splitting logic underlying the version comparison in [`nix-env -u`](../command-ref/nix-env.md#operation---upgrade). - `builtins.stringLength` *e* Return the length of the string *e*. If *e* is not a string, evaluation is aborted. - `builtins.sub` *e1* *e2* Return the difference between the numbers *e1* and *e2*. - `builtins.substring` *start* *len* *s* Return the substring of *s* from character position *start* (zero-based) up to but not including *start + len*. If *start* is greater than the length of the string, an empty string is returned, and if *start + len* lies beyond the end of the string, only the substring up to the end of the string is returned. *start* must be non-negative. For example, ```nix builtins.substring 0 3 "nixos" ``` evaluates to `"nix"`. - `builtins.tail` *list* Return the second to last elements of a list; abort evaluation if the argument isn’t a list or is an empty list. - `throw` *s*; `builtins.throw` *s* Throw an error message *s*. This usually aborts Nix expression evaluation, but in `nix-env -qa` and other commands that try to evaluate a set of derivations to get information about those derivations, a derivation that throws an error is silently skipped (which is not the case for `abort`). - `builtins.toFile` *name* *s* Store the string *s* in a file in the Nix store and return its path. The file has suffix *name*. This file can be used as an input to derivations. One application is to write builders “inline”. For instance, the following Nix expression combines the [Nix expression for GNU Hello](expression-syntax.md) and its [build script](build-script.md) into one file: ```nix { stdenv, fetchurl, perl }: stdenv.mkDerivation { name = "hello-2.1.1"; builder = builtins.toFile "builder.sh" " source $stdenv/setup PATH=$perl/bin:$PATH tar xvfz $src cd hello-* ./configure --prefix=$out make make install "; src = fetchurl { url = "http://ftp.nluug.nl/pub/gnu/hello/hello-2.1.1.tar.gz"; sha256 = "1md7jsfd8pa45z73bz1kszpp01yw6x5ljkjk2hx7wl800any6465"; }; inherit perl; } ``` It is even possible for one file to refer to another, e.g., ```nix builder = let configFile = builtins.toFile "foo.conf" " # This is some dummy configuration file. ... "; in builtins.toFile "builder.sh" " source $stdenv/setup ... cp ${configFile} $out/etc/foo.conf "; ``` Note that `${configFile}` is an [antiquotation](language-values.md), so the result of the expression `configFile` (i.e., a path like `/nix/store/m7p7jfny445k...-foo.conf`) will be spliced into the resulting string. It is however *not* allowed to have files mutually referring to each other, like so: ```nix let foo = builtins.toFile "foo" "...${bar}..."; bar = builtins.toFile "bar" "...${foo}..."; in foo ``` This is not allowed because it would cause a cyclic dependency in the computation of the cryptographic hashes for `foo` and `bar`. It is also not possible to reference the result of a derivation. If you are using Nixpkgs, the `writeTextFile` function is able to do that. - `builtins.toJSON` *e* Return a string containing a JSON representation of *e*. Strings, integers, floats, booleans, nulls and lists are mapped to their JSON equivalents. Sets (except derivations) are represented as objects. Derivations are translated to a JSON string containing the derivation’s output path. Paths are copied to the store and represented as a JSON string of the resulting store path. - `builtins.toPath` *s* DEPRECATED. Use `/. + "/path"` to convert a string into an absolute path. For relative paths, use `./. + "/path"`. - `toString` *e*; `builtins.toString` *e* Convert the expression *e* to a string. *e* can be: - A string (in which case the string is returned unmodified). - A path (e.g., `toString /foo/bar` yields `"/foo/bar"`. - A set containing `{ __toString = self: ...; }`. - An integer. - A list, in which case the string representations of its elements are joined with spaces. - A Boolean (`false` yields `""`, `true` yields `"1"`). - `null`, which yields the empty string. - `builtins.toXML` *e* Return a string containing an XML representation of *e*. The main application for `toXML` is to communicate information with the builder in a more structured format than plain environment variables. Here is an example where this is the case: ```nix { stdenv, fetchurl, libxslt, jira, uberwiki }: stdenv.mkDerivation (rec { name = "web-server"; buildInputs = [ libxslt ]; builder = builtins.toFile "builder.sh" " source $stdenv/setup mkdir $out echo "$servlets" | xsltproc ${stylesheet} - > $out/server-conf.xml ① "; stylesheet = builtins.toFile "stylesheet.xsl" ② " "; servlets = builtins.toXML [ ③ { path = "/bugtracker"; war = jira + "/lib/atlassian-jira.war"; } { path = "/wiki"; war = uberwiki + "/uberwiki.war"; } ]; }) ``` The builder is supposed to generate the configuration file for a [Jetty servlet container](http://jetty.mortbay.org/). A servlet container contains a number of servlets (`*.war` files) each exported under a specific URI prefix. So the servlet configuration is a list of sets containing the `path` and `war` of the servlet (①). This kind of information is difficult to communicate with the normal method of passing information through an environment variable, which just concatenates everything together into a string (which might just work in this case, but wouldn’t work if fields are optional or contain lists themselves). Instead the Nix expression is converted to an XML representation with `toXML`, which is unambiguous and can easily be processed with the appropriate tools. For instance, in the example an XSLT stylesheet (at point ②) is applied to it (at point ①) to generate the XML configuration file for the Jetty server. The XML representation produced at point ③ by `toXML` is as follows: ```xml ``` Note that we used the `toFile` built-in to write the builder and the stylesheet “inline” in the Nix expression. The path of the stylesheet is spliced into the builder using the syntax `xsltproc ${stylesheet}`. - `builtins.trace` *e1* *e2* Evaluate *e1* and print its abstract syntax representation on standard error. Then return *e2*. This function is useful for debugging. - `builtins.tryEval` *e* Try to shallowly evaluate *e*. Return a set containing the attributes `success` (`true` if *e* evaluated successfully, `false` if an error was thrown) and `value`, equalling *e* if successful and `false` otherwise. Note that this doesn't evaluate *e* deeply, so ` let e = { x = throw ""; }; in (builtins.tryEval e).success ` will be `true`. Using ` builtins.deepSeq ` one can get the expected result: `let e = { x = throw ""; }; in (builtins.tryEval (builtins.deepSeq e e)).success` will be `false`. - `builtins.typeOf` *e* Return a string representing the type of the value *e*, namely `"int"`, `"bool"`, `"string"`, `"path"`, `"null"`, `"set"`, `"list"`, `"lambda"` or `"float"`.