nix-super/scripts/install-darwin-multi-user.sh
Travis A. Everett 64a076fe06 install-darwin: fix symbolic perms for install cmd
The symbolic form in use here doesn't seem to have an effect
in either the BSD or coreutils install commands, leaving the
daemon plist with empty permissions. This seems to cause its
own problems.

I think I've got the right symbolic syntax now :)
2024-02-13 01:18:08 -06:00

227 lines
6.6 KiB
Bash

#!/usr/bin/env bash
set -eu
set -o pipefail
# System specific settings
export NIX_FIRST_BUILD_UID="${NIX_FIRST_BUILD_UID:-301}"
export NIX_BUILD_USER_NAME_TEMPLATE="_nixbld%d"
readonly NIX_DAEMON_DEST=/Library/LaunchDaemons/org.nixos.nix-daemon.plist
# create by default; set 0 to DIY, use a symlink, etc.
readonly NIX_VOLUME_CREATE=${NIX_VOLUME_CREATE:-1} # now default
# caution: may update times on / if not run as normal non-root user
read_only_root() {
# this touch command ~should~ always produce an error
# as of this change I confirmed /usr/bin/touch emits:
# "touch: /: Operation not permitted" Monterey
# "touch: /: Read-only file system" Catalina+ and Big Sur
# "touch: /: Permission denied" Mojave
# (not matching prefix for compat w/ coreutils touch in case using
# an explicit path causes problems; its prefix differs)
case "$(/usr/bin/touch / 2>&1)" in
*"Read-only file system") # Catalina, Big Sur
return 0
;;
*"Operation not permitted") # Monterey
return 0
;;
*)
return 1
;;
esac
# Avoiding the slow semantic way to get this information (~330ms vs ~8ms)
# unless using touch causes problems. Just in case, that approach is:
# diskutil info -plist / | <find the Writable or WritableVolume keys>, i.e.
# diskutil info -plist / | xmllint --xpath "name(/plist/dict/key[text()='Writable']/following-sibling::*[1])" -
}
if read_only_root && [ "$NIX_VOLUME_CREATE" = 1 ]; then
should_create_volume() { return 0; }
else
should_create_volume() { return 1; }
fi
# shellcheck source=./create-darwin-volume.sh
. "$EXTRACTED_NIX_PATH/create-darwin-volume.sh" "no-main"
dsclattr() {
/usr/bin/dscl . -read "$1" \
| /usr/bin/awk "/$2/ { print \$2 }"
}
test_nix_daemon_installed() {
test -e "$NIX_DAEMON_DEST"
}
poly_cure_artifacts() {
if should_create_volume; then
task "Fixing any leftover Nix volume state"
cat <<EOF
Before I try to install, I'll check for any existing Nix volume config
and ask for your permission to remove it (so that the installer can
start fresh). I'll also ask for permission to fix any issues I spot.
EOF
cure_volumes
remove_volume_artifacts
fi
}
poly_service_installed_check() {
if should_create_volume; then
test_nix_daemon_installed || test_nix_volume_mountd_installed
else
test_nix_daemon_installed
fi
}
poly_service_uninstall_directions() {
echo "$1. Remove macOS-specific components:"
if should_create_volume && test_nix_volume_mountd_installed; then
nix_volume_mountd_uninstall_directions
fi
if test_nix_daemon_installed; then
nix_daemon_uninstall_directions
fi
}
poly_service_setup_note() {
if should_create_volume; then
echo " - create a Nix volume and a LaunchDaemon to mount it"
fi
echo " - create a LaunchDaemon (at $NIX_DAEMON_DEST) for nix-daemon"
echo ""
}
poly_extra_try_me_commands() {
:
}
poly_configure_nix_daemon_service() {
task "Setting up the nix-daemon LaunchDaemon"
_sudo "to set up the nix-daemon as a LaunchDaemon" \
/usr/bin/install -m "u=rw,go=r" "/nix/var/nix/profiles/default$NIX_DAEMON_DEST" "$NIX_DAEMON_DEST"
_sudo "to load the LaunchDaemon plist for nix-daemon" \
launchctl load /Library/LaunchDaemons/org.nixos.nix-daemon.plist
_sudo "to start the nix-daemon" \
launchctl kickstart -k system/org.nixos.nix-daemon
}
poly_group_exists() {
/usr/bin/dscl . -read "/Groups/$1" > /dev/null 2>&1
}
poly_group_id_get() {
dsclattr "/Groups/$1" "PrimaryGroupID"
}
poly_create_build_group() {
_sudo "Create the Nix build group, $NIX_BUILD_GROUP_NAME" \
/usr/sbin/dseditgroup -o create \
-r "Nix build group for nix-daemon" \
-i "$NIX_BUILD_GROUP_ID" \
"$NIX_BUILD_GROUP_NAME" >&2
}
poly_user_exists() {
/usr/bin/dscl . -read "/Users/$1" > /dev/null 2>&1
}
poly_user_id_get() {
dsclattr "/Users/$1" "UniqueID"
}
poly_user_hidden_get() {
dsclattr "/Users/$1" "IsHidden"
}
poly_user_hidden_set() {
_sudo "in order to make $1 a hidden user" \
/usr/bin/dscl . -create "/Users/$1" "IsHidden" "1"
}
poly_user_home_get() {
dsclattr "/Users/$1" "NFSHomeDirectory"
}
poly_user_home_set() {
# This can trigger a permission prompt now:
# "Terminal" would like to administer your computer. Administration can include modifying passwords, networking, and system settings.
_sudo "in order to give $1 a safe home directory" \
/usr/bin/dscl . -create "/Users/$1" "NFSHomeDirectory" "$2"
}
poly_user_note_get() {
dsclattr "/Users/$1" "RealName"
}
poly_user_note_set() {
_sudo "in order to give $username a useful note" \
/usr/bin/dscl . -create "/Users/$1" "RealName" "$2"
}
poly_user_shell_get() {
dsclattr "/Users/$1" "UserShell"
}
poly_user_shell_set() {
_sudo "in order to give $1 a safe shell" \
/usr/bin/dscl . -create "/Users/$1" "UserShell" "$2"
}
poly_user_in_group_check() {
username=$1
group=$2
/usr/sbin/dseditgroup -o checkmember -m "$username" "$group" > /dev/null 2>&1
}
poly_user_in_group_set() {
username=$1
group=$2
_sudo "Add $username to the $group group"\
/usr/sbin/dseditgroup -o edit -t user \
-a "$username" "$group"
}
poly_user_primary_group_get() {
dsclattr "/Users/$1" "PrimaryGroupID"
}
poly_user_primary_group_set() {
_sudo "to let the nix daemon use this user for builds (this might seem redundant, but there are two concepts of group membership)" \
/usr/bin/dscl . -create "/Users/$1" "PrimaryGroupID" "$2"
}
poly_create_build_user() {
username=$1
uid=$2
builder_num=$3
_sudo "Creating the Nix build user (#$builder_num), $username" \
/usr/bin/dscl . create "/Users/$username" \
UniqueID "${uid}"
}
poly_prepare_to_install() {
if should_create_volume; then
header "Preparing a Nix volume"
# intentional indent below to match task indent
cat <<EOF
Nix traditionally stores its data in the root directory $NIX_ROOT, but
macOS now (starting in 10.15 Catalina) has a read-only root directory.
To support Nix, I will create a volume and configure macOS to mount it
at $NIX_ROOT.
EOF
setup_darwin_volume
fi
if [ "$(/usr/sbin/diskutil info -plist /nix | xmllint --xpath "(/plist/dict/key[text()='GlobalPermissionsEnabled'])/following-sibling::*[1]" -)" = "<false/>" ]; then
failure "This script needs a /nix volume with global permissions! This may require running sudo /usr/sbin/diskutil enableOwnership /nix."
fi
}