mirror of
https://github.com/privatevoid-net/nix-super.git
synced 2024-11-14 18:26:16 +02:00
37fca662b0
In https://github.com/NixOS/nix/pull/6311#discussion_r834863823, I realized since derivation goals' wanted outputs can "grow" due to overlapping dependencies (See `DerivationGoal::addWantedOutputs`, called by `Worker::makeDerivationGoalCommon`), the previous bug fix had an unfortunate side effect of causing more pointless rebuilds. In paticular, we have this situation: 1. Goal made from `DerivedPath::Built { foo, {a} }`. 2. Goal gives on on substituting, starts building. 3. Goal made from `DerivedPath::Built { foo, {b} }`, in fact is just modified original goal. 4. Though the goal had gotten as far as building, so all outputs were going to be produced, `addWantedOutputs` no longer knows that and so the goal is flagged to be restarted. This might sound far-fetched with input-addressed drvs, where we usually basically have all our goals "planned out" before we start doing anything, but with CA derivation goals and especially RFC 92, where *drv resolution* means goals are created after some building is completed, it is more likely to happen. So the first thing to do was restore the clearing of `wantedOutputs` we used to do, and then filter the outputs in `buildPathsWithResults` to only get the ones we care about. But fix also has its own side effect in that the `DerivedPath` in the `BuildResult` in `DerivationGoal` cannot be trusted; it is merely the *first* `DerivedPath` for which this goal was originally created. To remedy this, I made `BuildResult` be like it was before, and instead made `KeyedBuildResult` be a subclass wit the path. Only `buildPathsWithResults` returns `KeyedBuildResult`s, everything else just becomes like it was before, where the "key" is unambiguous from context. I think separating the "primary key" field(s) from the other fields is good practical in general anyways. (I would like to do the same thing for `ValidPathInfo`.) Among other things, it allows constructions like `std::map<Key, ThingWithKey>` where doesn't contain duplicate keys and just precludes the possibility of those duplicate keys being out of sync. We might leverage the above someday to overload `buildPathsWithResults` to take a *set* of return a *map* per the above. ----- Unfortunately, we need to avoid C++20 strictness on designated initializers. (BTW https://www.open-std.org/jtc1/sc22/wg21/docs/papers/2021/p2287r1.html this offers some new syntax for this use-case. Hopefully this will be adopted and we can eventually use it.) No having that yet, maybe it would be better to not make `KeyedBuildResult` a subclass to just avoid this. Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
1481 lines
48 KiB
C++
1481 lines
48 KiB
C++
#include "derivation-goal.hh"
|
|
#include "hook-instance.hh"
|
|
#include "worker.hh"
|
|
#include "builtins.hh"
|
|
#include "builtins/buildenv.hh"
|
|
#include "references.hh"
|
|
#include "finally.hh"
|
|
#include "util.hh"
|
|
#include "archive.hh"
|
|
#include "compression.hh"
|
|
#include "worker-protocol.hh"
|
|
#include "topo-sort.hh"
|
|
#include "callback.hh"
|
|
#include "local-store.hh" // TODO remove, along with remaining downcasts
|
|
|
|
#include <regex>
|
|
#include <queue>
|
|
|
|
#include <fstream>
|
|
#include <sys/types.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/un.h>
|
|
#include <sys/wait.h>
|
|
#include <netdb.h>
|
|
#include <fcntl.h>
|
|
#include <termios.h>
|
|
#include <unistd.h>
|
|
#include <sys/mman.h>
|
|
#include <sys/utsname.h>
|
|
#include <sys/resource.h>
|
|
|
|
#if HAVE_STATVFS
|
|
#include <sys/statvfs.h>
|
|
#endif
|
|
|
|
/* Includes required for chroot support. */
|
|
#if __linux__
|
|
#include <sys/socket.h>
|
|
#include <sys/ioctl.h>
|
|
#include <net/if.h>
|
|
#include <netinet/ip.h>
|
|
#include <sys/mman.h>
|
|
#include <sched.h>
|
|
#include <sys/param.h>
|
|
#include <sys/mount.h>
|
|
#include <sys/syscall.h>
|
|
#if HAVE_SECCOMP
|
|
#include <seccomp.h>
|
|
#endif
|
|
#define pivot_root(new_root, put_old) (syscall(SYS_pivot_root, new_root, put_old))
|
|
#endif
|
|
|
|
#if __APPLE__
|
|
#include <spawn.h>
|
|
#include <sys/sysctl.h>
|
|
#endif
|
|
|
|
#include <pwd.h>
|
|
#include <grp.h>
|
|
|
|
#include <nlohmann/json.hpp>
|
|
|
|
namespace nix {
|
|
|
|
DerivationGoal::DerivationGoal(const StorePath & drvPath,
|
|
const OutputsSpec & wantedOutputs, Worker & worker, BuildMode buildMode)
|
|
: Goal(worker, DerivedPath::Built { .drvPath = drvPath, .outputs = wantedOutputs })
|
|
, useDerivation(true)
|
|
, drvPath(drvPath)
|
|
, wantedOutputs(wantedOutputs)
|
|
, buildMode(buildMode)
|
|
{
|
|
state = &DerivationGoal::getDerivation;
|
|
name = fmt(
|
|
"building of '%s' from .drv file",
|
|
DerivedPath::Built { drvPath, wantedOutputs }.to_string(worker.store));
|
|
trace("created");
|
|
|
|
mcExpectedBuilds = std::make_unique<MaintainCount<uint64_t>>(worker.expectedBuilds);
|
|
worker.updateProgress();
|
|
}
|
|
|
|
|
|
DerivationGoal::DerivationGoal(const StorePath & drvPath, const BasicDerivation & drv,
|
|
const OutputsSpec & wantedOutputs, Worker & worker, BuildMode buildMode)
|
|
: Goal(worker, DerivedPath::Built { .drvPath = drvPath, .outputs = wantedOutputs })
|
|
, useDerivation(false)
|
|
, drvPath(drvPath)
|
|
, wantedOutputs(wantedOutputs)
|
|
, buildMode(buildMode)
|
|
{
|
|
this->drv = std::make_unique<Derivation>(drv);
|
|
|
|
state = &DerivationGoal::haveDerivation;
|
|
name = fmt(
|
|
"building of '%s' from in-memory derivation",
|
|
DerivedPath::Built { drvPath, drv.outputNames() }.to_string(worker.store));
|
|
trace("created");
|
|
|
|
mcExpectedBuilds = std::make_unique<MaintainCount<uint64_t>>(worker.expectedBuilds);
|
|
worker.updateProgress();
|
|
|
|
/* Prevent the .chroot directory from being
|
|
garbage-collected. (See isActiveTempFile() in gc.cc.) */
|
|
worker.store.addTempRoot(this->drvPath);
|
|
}
|
|
|
|
|
|
DerivationGoal::~DerivationGoal()
|
|
{
|
|
/* Careful: we should never ever throw an exception from a
|
|
destructor. */
|
|
try { closeLogFile(); } catch (...) { ignoreException(); }
|
|
}
|
|
|
|
|
|
std::string DerivationGoal::key()
|
|
{
|
|
/* Ensure that derivations get built in order of their name,
|
|
i.e. a derivation named "aardvark" always comes before
|
|
"baboon". And substitution goals always happen before
|
|
derivation goals (due to "b$"). */
|
|
return "b$" + std::string(drvPath.name()) + "$" + worker.store.printStorePath(drvPath);
|
|
}
|
|
|
|
|
|
void DerivationGoal::killChild()
|
|
{
|
|
hook.reset();
|
|
}
|
|
|
|
|
|
void DerivationGoal::timedOut(Error && ex)
|
|
{
|
|
killChild();
|
|
done(BuildResult::TimedOut, {}, std::move(ex));
|
|
}
|
|
|
|
|
|
void DerivationGoal::work()
|
|
{
|
|
(this->*state)();
|
|
}
|
|
|
|
void DerivationGoal::addWantedOutputs(const OutputsSpec & outputs)
|
|
{
|
|
auto newWanted = wantedOutputs.union_(outputs);
|
|
if (!newWanted.isSubsetOf(wantedOutputs))
|
|
needRestart = true;
|
|
wantedOutputs = newWanted;
|
|
}
|
|
|
|
|
|
void DerivationGoal::getDerivation()
|
|
{
|
|
trace("init");
|
|
|
|
/* The first thing to do is to make sure that the derivation
|
|
exists. If it doesn't, it may be created through a
|
|
substitute. */
|
|
if (buildMode == bmNormal && worker.evalStore.isValidPath(drvPath)) {
|
|
loadDerivation();
|
|
return;
|
|
}
|
|
|
|
addWaitee(upcast_goal(worker.makePathSubstitutionGoal(drvPath)));
|
|
|
|
state = &DerivationGoal::loadDerivation;
|
|
}
|
|
|
|
|
|
void DerivationGoal::loadDerivation()
|
|
{
|
|
trace("loading derivation");
|
|
|
|
if (nrFailed != 0) {
|
|
done(BuildResult::MiscFailure, {}, Error("cannot build missing derivation '%s'", worker.store.printStorePath(drvPath)));
|
|
return;
|
|
}
|
|
|
|
/* `drvPath' should already be a root, but let's be on the safe
|
|
side: if the user forgot to make it a root, we wouldn't want
|
|
things being garbage collected while we're busy. */
|
|
worker.evalStore.addTempRoot(drvPath);
|
|
|
|
assert(worker.evalStore.isValidPath(drvPath));
|
|
|
|
/* Get the derivation. */
|
|
drv = std::make_unique<Derivation>(worker.evalStore.readDerivation(drvPath));
|
|
|
|
haveDerivation();
|
|
}
|
|
|
|
|
|
void DerivationGoal::haveDerivation()
|
|
{
|
|
trace("have derivation");
|
|
|
|
parsedDrv = std::make_unique<ParsedDerivation>(drvPath, *drv);
|
|
|
|
if (!drv->type().hasKnownOutputPaths())
|
|
experimentalFeatureSettings.require(Xp::CaDerivations);
|
|
|
|
if (!drv->type().isPure()) {
|
|
experimentalFeatureSettings.require(Xp::ImpureDerivations);
|
|
|
|
for (auto & [outputName, output] : drv->outputs) {
|
|
auto randomPath = StorePath::random(outputPathName(drv->name, outputName));
|
|
assert(!worker.store.isValidPath(randomPath));
|
|
initialOutputs.insert({
|
|
outputName,
|
|
InitialOutput {
|
|
.wanted = true,
|
|
.outputHash = impureOutputHash,
|
|
.known = InitialOutputStatus {
|
|
.path = randomPath,
|
|
.status = PathStatus::Absent
|
|
}
|
|
}
|
|
});
|
|
}
|
|
|
|
gaveUpOnSubstitution();
|
|
return;
|
|
}
|
|
|
|
for (auto & i : drv->outputsAndOptPaths(worker.store))
|
|
if (i.second.second)
|
|
worker.store.addTempRoot(*i.second.second);
|
|
|
|
auto outputHashes = staticOutputHashes(worker.evalStore, *drv);
|
|
for (auto & [outputName, outputHash] : outputHashes)
|
|
initialOutputs.insert({
|
|
outputName,
|
|
InitialOutput {
|
|
.wanted = true, // Will be refined later
|
|
.outputHash = outputHash
|
|
}
|
|
});
|
|
|
|
/* Check what outputs paths are not already valid. */
|
|
auto [allValid, validOutputs] = checkPathValidity();
|
|
|
|
/* If they are all valid, then we're done. */
|
|
if (allValid && buildMode == bmNormal) {
|
|
done(BuildResult::AlreadyValid, std::move(validOutputs));
|
|
return;
|
|
}
|
|
|
|
/* We are first going to try to create the invalid output paths
|
|
through substitutes. If that doesn't work, we'll build
|
|
them. */
|
|
if (settings.useSubstitutes && parsedDrv->substitutesAllowed())
|
|
for (auto & [outputName, status] : initialOutputs) {
|
|
if (!status.wanted) continue;
|
|
if (!status.known)
|
|
addWaitee(
|
|
upcast_goal(
|
|
worker.makeDrvOutputSubstitutionGoal(
|
|
DrvOutput{status.outputHash, outputName},
|
|
buildMode == bmRepair ? Repair : NoRepair
|
|
)
|
|
)
|
|
);
|
|
else
|
|
addWaitee(upcast_goal(worker.makePathSubstitutionGoal(
|
|
status.known->path,
|
|
buildMode == bmRepair ? Repair : NoRepair,
|
|
getDerivationCA(*drv))));
|
|
}
|
|
|
|
if (waitees.empty()) /* to prevent hang (no wake-up event) */
|
|
outputsSubstitutionTried();
|
|
else
|
|
state = &DerivationGoal::outputsSubstitutionTried;
|
|
}
|
|
|
|
|
|
void DerivationGoal::outputsSubstitutionTried()
|
|
{
|
|
trace("all outputs substituted (maybe)");
|
|
|
|
assert(drv->type().isPure());
|
|
|
|
if (nrFailed > 0 && nrFailed > nrNoSubstituters + nrIncompleteClosure && !settings.tryFallback) {
|
|
done(BuildResult::TransientFailure, {},
|
|
Error("some substitutes for the outputs of derivation '%s' failed (usually happens due to networking issues); try '--fallback' to build derivation from source ",
|
|
worker.store.printStorePath(drvPath)));
|
|
return;
|
|
}
|
|
|
|
/* If the substitutes form an incomplete closure, then we should
|
|
build the dependencies of this derivation, but after that, we
|
|
can still use the substitutes for this derivation itself.
|
|
|
|
If the nrIncompleteClosure != nrFailed, we have another issue as well.
|
|
In particular, it may be the case that the hole in the closure is
|
|
an output of the current derivation, which causes a loop if retried.
|
|
*/
|
|
if (nrIncompleteClosure > 0 && nrIncompleteClosure == nrFailed) retrySubstitution = true;
|
|
|
|
nrFailed = nrNoSubstituters = nrIncompleteClosure = 0;
|
|
|
|
if (needRestart) {
|
|
needRestart = false;
|
|
haveDerivation();
|
|
return;
|
|
}
|
|
|
|
auto [allValid, validOutputs] = checkPathValidity();
|
|
|
|
if (buildMode == bmNormal && allValid) {
|
|
done(BuildResult::Substituted, std::move(validOutputs));
|
|
return;
|
|
}
|
|
if (buildMode == bmRepair && allValid) {
|
|
repairClosure();
|
|
return;
|
|
}
|
|
if (buildMode == bmCheck && !allValid)
|
|
throw Error("some outputs of '%s' are not valid, so checking is not possible",
|
|
worker.store.printStorePath(drvPath));
|
|
|
|
/* Nothing to wait for; tail call */
|
|
gaveUpOnSubstitution();
|
|
}
|
|
|
|
|
|
/* At least one of the output paths could not be
|
|
produced using a substitute. So we have to build instead. */
|
|
void DerivationGoal::gaveUpOnSubstitution()
|
|
{
|
|
/* Make sure checkPathValidity() from now on checks all
|
|
outputs. */
|
|
wantedOutputs = OutputsSpec::All { };
|
|
|
|
/* The inputs must be built before we can build this goal. */
|
|
inputDrvOutputs.clear();
|
|
if (useDerivation)
|
|
for (auto & i : dynamic_cast<Derivation *>(drv.get())->inputDrvs) {
|
|
/* Ensure that pure, non-fixed-output derivations don't
|
|
depend on impure derivations. */
|
|
if (experimentalFeatureSettings.isEnabled(Xp::ImpureDerivations) && drv->type().isPure() && !drv->type().isFixed()) {
|
|
auto inputDrv = worker.evalStore.readDerivation(i.first);
|
|
if (!inputDrv.type().isPure())
|
|
throw Error("pure derivation '%s' depends on impure derivation '%s'",
|
|
worker.store.printStorePath(drvPath),
|
|
worker.store.printStorePath(i.first));
|
|
}
|
|
|
|
addWaitee(worker.makeDerivationGoal(i.first, i.second, buildMode == bmRepair ? bmRepair : bmNormal));
|
|
}
|
|
|
|
/* Copy the input sources from the eval store to the build
|
|
store. */
|
|
if (&worker.evalStore != &worker.store) {
|
|
RealisedPath::Set inputSrcs;
|
|
for (auto & i : drv->inputSrcs)
|
|
inputSrcs.insert(i);
|
|
copyClosure(worker.evalStore, worker.store, inputSrcs);
|
|
}
|
|
|
|
for (auto & i : drv->inputSrcs) {
|
|
if (worker.store.isValidPath(i)) continue;
|
|
if (!settings.useSubstitutes)
|
|
throw Error("dependency '%s' of '%s' does not exist, and substitution is disabled",
|
|
worker.store.printStorePath(i), worker.store.printStorePath(drvPath));
|
|
addWaitee(upcast_goal(worker.makePathSubstitutionGoal(i)));
|
|
}
|
|
|
|
if (waitees.empty()) /* to prevent hang (no wake-up event) */
|
|
inputsRealised();
|
|
else
|
|
state = &DerivationGoal::inputsRealised;
|
|
}
|
|
|
|
|
|
void DerivationGoal::repairClosure()
|
|
{
|
|
assert(drv->type().isPure());
|
|
|
|
/* If we're repairing, we now know that our own outputs are valid.
|
|
Now check whether the other paths in the outputs closure are
|
|
good. If not, then start derivation goals for the derivations
|
|
that produced those outputs. */
|
|
|
|
/* Get the output closure. */
|
|
auto outputs = queryDerivationOutputMap();
|
|
StorePathSet outputClosure;
|
|
for (auto & i : outputs) {
|
|
if (!wantedOutputs.contains(i.first)) continue;
|
|
worker.store.computeFSClosure(i.second, outputClosure);
|
|
}
|
|
|
|
/* Filter out our own outputs (which we have already checked). */
|
|
for (auto & i : outputs)
|
|
outputClosure.erase(i.second);
|
|
|
|
/* Get all dependencies of this derivation so that we know which
|
|
derivation is responsible for which path in the output
|
|
closure. */
|
|
StorePathSet inputClosure;
|
|
if (useDerivation) worker.store.computeFSClosure(drvPath, inputClosure);
|
|
std::map<StorePath, StorePath> outputsToDrv;
|
|
for (auto & i : inputClosure)
|
|
if (i.isDerivation()) {
|
|
auto depOutputs = worker.store.queryPartialDerivationOutputMap(i);
|
|
for (auto & j : depOutputs)
|
|
if (j.second)
|
|
outputsToDrv.insert_or_assign(*j.second, i);
|
|
}
|
|
|
|
/* Check each path (slow!). */
|
|
for (auto & i : outputClosure) {
|
|
if (worker.pathContentsGood(i)) continue;
|
|
printError(
|
|
"found corrupted or missing path '%s' in the output closure of '%s'",
|
|
worker.store.printStorePath(i), worker.store.printStorePath(drvPath));
|
|
auto drvPath2 = outputsToDrv.find(i);
|
|
if (drvPath2 == outputsToDrv.end())
|
|
addWaitee(upcast_goal(worker.makePathSubstitutionGoal(i, Repair)));
|
|
else
|
|
addWaitee(worker.makeDerivationGoal(drvPath2->second, OutputsSpec::All(), bmRepair));
|
|
}
|
|
|
|
if (waitees.empty()) {
|
|
done(BuildResult::AlreadyValid, assertPathValidity());
|
|
return;
|
|
}
|
|
|
|
state = &DerivationGoal::closureRepaired;
|
|
}
|
|
|
|
|
|
void DerivationGoal::closureRepaired()
|
|
{
|
|
trace("closure repaired");
|
|
if (nrFailed > 0)
|
|
throw Error("some paths in the output closure of derivation '%s' could not be repaired",
|
|
worker.store.printStorePath(drvPath));
|
|
done(BuildResult::AlreadyValid, assertPathValidity());
|
|
}
|
|
|
|
|
|
void DerivationGoal::inputsRealised()
|
|
{
|
|
trace("all inputs realised");
|
|
|
|
if (nrFailed != 0) {
|
|
if (!useDerivation)
|
|
throw Error("some dependencies of '%s' are missing", worker.store.printStorePath(drvPath));
|
|
done(BuildResult::DependencyFailed, {}, Error(
|
|
"%s dependencies of derivation '%s' failed to build",
|
|
nrFailed, worker.store.printStorePath(drvPath)));
|
|
return;
|
|
}
|
|
|
|
if (retrySubstitution && !retriedSubstitution) {
|
|
retriedSubstitution = true;
|
|
haveDerivation();
|
|
return;
|
|
}
|
|
|
|
/* Gather information necessary for computing the closure and/or
|
|
running the build hook. */
|
|
|
|
/* Determine the full set of input paths. */
|
|
|
|
/* First, the input derivations. */
|
|
if (useDerivation) {
|
|
auto & fullDrv = *dynamic_cast<Derivation *>(drv.get());
|
|
|
|
auto drvType = fullDrv.type();
|
|
bool resolveDrv = std::visit(overloaded {
|
|
[&](const DerivationType::InputAddressed & ia) {
|
|
/* must resolve if deferred. */
|
|
return ia.deferred;
|
|
},
|
|
[&](const DerivationType::ContentAddressed & ca) {
|
|
return !fullDrv.inputDrvs.empty() && (
|
|
ca.fixed
|
|
/* Can optionally resolve if fixed, which is good
|
|
for avoiding unnecessary rebuilds. */
|
|
? experimentalFeatureSettings.isEnabled(Xp::CaDerivations)
|
|
/* Must resolve if floating and there are any inputs
|
|
drvs. */
|
|
: true);
|
|
},
|
|
[&](const DerivationType::Impure &) {
|
|
return true;
|
|
}
|
|
}, drvType.raw());
|
|
|
|
if (resolveDrv && !fullDrv.inputDrvs.empty()) {
|
|
experimentalFeatureSettings.require(Xp::CaDerivations);
|
|
|
|
/* We are be able to resolve this derivation based on the
|
|
now-known results of dependencies. If so, we become a
|
|
stub goal aliasing that resolved derivation goal. */
|
|
std::optional attempt = fullDrv.tryResolve(worker.store, inputDrvOutputs);
|
|
if (!attempt) {
|
|
/* TODO (impure derivations-induced tech debt) (see below):
|
|
The above attempt should have found it, but because we manage
|
|
inputDrvOutputs statefully, sometimes it gets out of sync with
|
|
the real source of truth (store). So we query the store
|
|
directly if there's a problem. */
|
|
attempt = fullDrv.tryResolve(worker.store);
|
|
}
|
|
assert(attempt);
|
|
Derivation drvResolved { *std::move(attempt) };
|
|
|
|
auto pathResolved = writeDerivation(worker.store, drvResolved);
|
|
|
|
auto msg = fmt("resolved derivation: '%s' -> '%s'",
|
|
worker.store.printStorePath(drvPath),
|
|
worker.store.printStorePath(pathResolved));
|
|
act = std::make_unique<Activity>(*logger, lvlInfo, actBuildWaiting, msg,
|
|
Logger::Fields {
|
|
worker.store.printStorePath(drvPath),
|
|
worker.store.printStorePath(pathResolved),
|
|
});
|
|
|
|
resolvedDrvGoal = worker.makeDerivationGoal(
|
|
pathResolved, wantedOutputs, buildMode);
|
|
addWaitee(resolvedDrvGoal);
|
|
|
|
state = &DerivationGoal::resolvedFinished;
|
|
return;
|
|
}
|
|
|
|
for (auto & [depDrvPath, wantedDepOutputs] : fullDrv.inputDrvs) {
|
|
/* Add the relevant output closures of the input derivation
|
|
`i' as input paths. Only add the closures of output paths
|
|
that are specified as inputs. */
|
|
for (auto & j : wantedDepOutputs) {
|
|
/* TODO (impure derivations-induced tech debt):
|
|
Tracking input derivation outputs statefully through the
|
|
goals is error prone and has led to bugs.
|
|
For a robust nix, we need to move towards the `else` branch,
|
|
which does not rely on goal state to match up with the
|
|
reality of the store, which is our real source of truth.
|
|
However, the impure derivations feature still relies on this
|
|
fragile way of doing things, because its builds do not have
|
|
a representation in the store, which is a usability problem
|
|
in itself. When implementing this logic entirely with lookups
|
|
make sure that they're cached. */
|
|
if (auto outPath = get(inputDrvOutputs, { depDrvPath, j })) {
|
|
worker.store.computeFSClosure(*outPath, inputPaths);
|
|
}
|
|
else {
|
|
auto outMap = worker.evalStore.queryDerivationOutputMap(depDrvPath);
|
|
auto outMapPath = outMap.find(j);
|
|
if (outMapPath == outMap.end()) {
|
|
throw Error(
|
|
"derivation '%s' requires non-existent output '%s' from input derivation '%s'",
|
|
worker.store.printStorePath(drvPath), j, worker.store.printStorePath(depDrvPath));
|
|
}
|
|
worker.store.computeFSClosure(outMapPath->second, inputPaths);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Second, the input sources. */
|
|
worker.store.computeFSClosure(drv->inputSrcs, inputPaths);
|
|
|
|
debug("added input paths %s", worker.store.showPaths(inputPaths));
|
|
|
|
/* What type of derivation are we building? */
|
|
derivationType = drv->type();
|
|
|
|
/* Okay, try to build. Note that here we don't wait for a build
|
|
slot to become available, since we don't need one if there is a
|
|
build hook. */
|
|
state = &DerivationGoal::tryToBuild;
|
|
worker.wakeUp(shared_from_this());
|
|
}
|
|
|
|
void DerivationGoal::started()
|
|
{
|
|
auto msg = fmt(
|
|
buildMode == bmRepair ? "repairing outputs of '%s'" :
|
|
buildMode == bmCheck ? "checking outputs of '%s'" :
|
|
"building '%s'", worker.store.printStorePath(drvPath));
|
|
fmt("building '%s'", worker.store.printStorePath(drvPath));
|
|
if (hook) msg += fmt(" on '%s'", machineName);
|
|
act = std::make_unique<Activity>(*logger, lvlInfo, actBuild, msg,
|
|
Logger::Fields{worker.store.printStorePath(drvPath), hook ? machineName : "", 1, 1});
|
|
mcRunningBuilds = std::make_unique<MaintainCount<uint64_t>>(worker.runningBuilds);
|
|
worker.updateProgress();
|
|
}
|
|
|
|
void DerivationGoal::tryToBuild()
|
|
{
|
|
trace("trying to build");
|
|
|
|
/* Obtain locks on all output paths, if the paths are known a priori.
|
|
|
|
The locks are automatically released when we exit this function or Nix
|
|
crashes. If we can't acquire the lock, then continue; hopefully some
|
|
other goal can start a build, and if not, the main loop will sleep a few
|
|
seconds and then retry this goal. */
|
|
PathSet lockFiles;
|
|
/* FIXME: Should lock something like the drv itself so we don't build same
|
|
CA drv concurrently */
|
|
if (dynamic_cast<LocalStore *>(&worker.store)) {
|
|
/* If we aren't a local store, we might need to use the local store as
|
|
a build remote, but that would cause a deadlock. */
|
|
/* FIXME: Make it so we can use ourselves as a build remote even if we
|
|
are the local store (separate locking for building vs scheduling? */
|
|
/* FIXME: find some way to lock for scheduling for the other stores so
|
|
a forking daemon with --store still won't farm out redundant builds.
|
|
*/
|
|
for (auto & i : drv->outputsAndOptPaths(worker.store)) {
|
|
if (i.second.second)
|
|
lockFiles.insert(worker.store.Store::toRealPath(*i.second.second));
|
|
else
|
|
lockFiles.insert(
|
|
worker.store.Store::toRealPath(drvPath) + "." + i.first
|
|
);
|
|
}
|
|
}
|
|
|
|
if (!outputLocks.lockPaths(lockFiles, "", false)) {
|
|
if (!actLock)
|
|
actLock = std::make_unique<Activity>(*logger, lvlWarn, actBuildWaiting,
|
|
fmt("waiting for lock on %s", yellowtxt(showPaths(lockFiles))));
|
|
worker.waitForAWhile(shared_from_this());
|
|
return;
|
|
}
|
|
|
|
actLock.reset();
|
|
|
|
/* Now check again whether the outputs are valid. This is because
|
|
another process may have started building in parallel. After
|
|
it has finished and released the locks, we can (and should)
|
|
reuse its results. (Strictly speaking the first check can be
|
|
omitted, but that would be less efficient.) Note that since we
|
|
now hold the locks on the output paths, no other process can
|
|
build this derivation, so no further checks are necessary. */
|
|
auto [allValid, validOutputs] = checkPathValidity();
|
|
|
|
if (buildMode != bmCheck && allValid) {
|
|
debug("skipping build of derivation '%s', someone beat us to it", worker.store.printStorePath(drvPath));
|
|
outputLocks.setDeletion(true);
|
|
done(BuildResult::AlreadyValid, std::move(validOutputs));
|
|
return;
|
|
}
|
|
|
|
/* If any of the outputs already exist but are not valid, delete
|
|
them. */
|
|
for (auto & [_, status] : initialOutputs) {
|
|
if (!status.known || status.known->isValid()) continue;
|
|
auto storePath = status.known->path;
|
|
debug("removing invalid path '%s'", worker.store.printStorePath(status.known->path));
|
|
deletePath(worker.store.Store::toRealPath(storePath));
|
|
}
|
|
|
|
/* Don't do a remote build if the derivation has the attribute
|
|
`preferLocalBuild' set. Also, check and repair modes are only
|
|
supported for local builds. */
|
|
bool buildLocally =
|
|
(buildMode != bmNormal || parsedDrv->willBuildLocally(worker.store))
|
|
&& settings.maxBuildJobs.get() != 0;
|
|
|
|
if (!buildLocally) {
|
|
switch (tryBuildHook()) {
|
|
case rpAccept:
|
|
/* Yes, it has started doing so. Wait until we get
|
|
EOF from the hook. */
|
|
actLock.reset();
|
|
buildResult.startTime = time(0); // inexact
|
|
state = &DerivationGoal::buildDone;
|
|
started();
|
|
return;
|
|
case rpPostpone:
|
|
/* Not now; wait until at least one child finishes or
|
|
the wake-up timeout expires. */
|
|
if (!actLock)
|
|
actLock = std::make_unique<Activity>(*logger, lvlWarn, actBuildWaiting,
|
|
fmt("waiting for a machine to build '%s'", yellowtxt(worker.store.printStorePath(drvPath))));
|
|
worker.waitForAWhile(shared_from_this());
|
|
outputLocks.unlock();
|
|
return;
|
|
case rpDecline:
|
|
/* We should do it ourselves. */
|
|
break;
|
|
}
|
|
}
|
|
|
|
actLock.reset();
|
|
|
|
state = &DerivationGoal::tryLocalBuild;
|
|
worker.wakeUp(shared_from_this());
|
|
}
|
|
|
|
void DerivationGoal::tryLocalBuild() {
|
|
throw Error(
|
|
"unable to build with a primary store that isn't a local store; "
|
|
"either pass a different '--store' or enable remote builds."
|
|
"\nhttps://nixos.org/manual/nix/stable/advanced-topics/distributed-builds.html");
|
|
}
|
|
|
|
|
|
static void chmod_(const Path & path, mode_t mode)
|
|
{
|
|
if (chmod(path.c_str(), mode) == -1)
|
|
throw SysError("setting permissions on '%s'", path);
|
|
}
|
|
|
|
|
|
/* Move/rename path 'src' to 'dst'. Temporarily make 'src' writable if
|
|
it's a directory and we're not root (to be able to update the
|
|
directory's parent link ".."). */
|
|
static void movePath(const Path & src, const Path & dst)
|
|
{
|
|
auto st = lstat(src);
|
|
|
|
bool changePerm = (geteuid() && S_ISDIR(st.st_mode) && !(st.st_mode & S_IWUSR));
|
|
|
|
if (changePerm)
|
|
chmod_(src, st.st_mode | S_IWUSR);
|
|
|
|
renameFile(src, dst);
|
|
|
|
if (changePerm)
|
|
chmod_(dst, st.st_mode);
|
|
}
|
|
|
|
|
|
void replaceValidPath(const Path & storePath, const Path & tmpPath)
|
|
{
|
|
/* We can't atomically replace storePath (the original) with
|
|
tmpPath (the replacement), so we have to move it out of the
|
|
way first. We'd better not be interrupted here, because if
|
|
we're repairing (say) Glibc, we end up with a broken system. */
|
|
Path oldPath = fmt("%1%.old-%2%-%3%", storePath, getpid(), random());
|
|
if (pathExists(storePath))
|
|
movePath(storePath, oldPath);
|
|
|
|
try {
|
|
movePath(tmpPath, storePath);
|
|
} catch (...) {
|
|
try {
|
|
// attempt to recover
|
|
movePath(oldPath, storePath);
|
|
} catch (...) {
|
|
ignoreException();
|
|
}
|
|
throw;
|
|
}
|
|
|
|
deletePath(oldPath);
|
|
}
|
|
|
|
|
|
int DerivationGoal::getChildStatus()
|
|
{
|
|
return hook->pid.kill();
|
|
}
|
|
|
|
|
|
void DerivationGoal::closeReadPipes()
|
|
{
|
|
hook->builderOut.readSide = -1;
|
|
hook->fromHook.readSide = -1;
|
|
}
|
|
|
|
|
|
void DerivationGoal::cleanupHookFinally()
|
|
{
|
|
}
|
|
|
|
|
|
void DerivationGoal::cleanupPreChildKill()
|
|
{
|
|
}
|
|
|
|
|
|
void DerivationGoal::cleanupPostChildKill()
|
|
{
|
|
}
|
|
|
|
|
|
bool DerivationGoal::cleanupDecideWhetherDiskFull()
|
|
{
|
|
return false;
|
|
}
|
|
|
|
|
|
void DerivationGoal::cleanupPostOutputsRegisteredModeCheck()
|
|
{
|
|
}
|
|
|
|
|
|
void DerivationGoal::cleanupPostOutputsRegisteredModeNonCheck()
|
|
{
|
|
}
|
|
|
|
void runPostBuildHook(
|
|
Store & store,
|
|
Logger & logger,
|
|
const StorePath & drvPath,
|
|
const StorePathSet & outputPaths)
|
|
{
|
|
auto hook = settings.postBuildHook;
|
|
if (hook == "")
|
|
return;
|
|
|
|
Activity act(logger, lvlInfo, actPostBuildHook,
|
|
fmt("running post-build-hook '%s'", settings.postBuildHook),
|
|
Logger::Fields{store.printStorePath(drvPath)});
|
|
PushActivity pact(act.id);
|
|
std::map<std::string, std::string> hookEnvironment = getEnv();
|
|
|
|
hookEnvironment.emplace("DRV_PATH", store.printStorePath(drvPath));
|
|
hookEnvironment.emplace("OUT_PATHS", chomp(concatStringsSep(" ", store.printStorePathSet(outputPaths))));
|
|
hookEnvironment.emplace("NIX_CONFIG", globalConfig.toKeyValue());
|
|
|
|
struct LogSink : Sink {
|
|
Activity & act;
|
|
std::string currentLine;
|
|
|
|
LogSink(Activity & act) : act(act) { }
|
|
|
|
void operator() (std::string_view data) override {
|
|
for (auto c : data) {
|
|
if (c == '\n') {
|
|
flushLine();
|
|
} else {
|
|
currentLine += c;
|
|
}
|
|
}
|
|
}
|
|
|
|
void flushLine() {
|
|
act.result(resPostBuildLogLine, currentLine);
|
|
currentLine.clear();
|
|
}
|
|
|
|
~LogSink() {
|
|
if (currentLine != "") {
|
|
currentLine += '\n';
|
|
flushLine();
|
|
}
|
|
}
|
|
};
|
|
LogSink sink(act);
|
|
|
|
runProgram2({
|
|
.program = settings.postBuildHook,
|
|
.environment = hookEnvironment,
|
|
.standardOut = &sink,
|
|
.mergeStderrToStdout = true,
|
|
});
|
|
}
|
|
|
|
void DerivationGoal::buildDone()
|
|
{
|
|
trace("build done");
|
|
|
|
Finally releaseBuildUser([&](){ this->cleanupHookFinally(); });
|
|
|
|
cleanupPreChildKill();
|
|
|
|
/* Since we got an EOF on the logger pipe, the builder is presumed
|
|
to have terminated. In fact, the builder could also have
|
|
simply have closed its end of the pipe, so just to be sure,
|
|
kill it. */
|
|
int status = getChildStatus();
|
|
|
|
debug("builder process for '%s' finished", worker.store.printStorePath(drvPath));
|
|
|
|
buildResult.timesBuilt++;
|
|
buildResult.stopTime = time(0);
|
|
|
|
/* So the child is gone now. */
|
|
worker.childTerminated(this);
|
|
|
|
/* Close the read side of the logger pipe. */
|
|
closeReadPipes();
|
|
|
|
/* Close the log file. */
|
|
closeLogFile();
|
|
|
|
cleanupPostChildKill();
|
|
|
|
if (buildResult.cpuUser && buildResult.cpuSystem) {
|
|
debug("builder for '%s' terminated with status %d, user CPU %.3fs, system CPU %.3fs",
|
|
worker.store.printStorePath(drvPath),
|
|
status,
|
|
((double) buildResult.cpuUser->count()) / 1000000,
|
|
((double) buildResult.cpuSystem->count()) / 1000000);
|
|
}
|
|
|
|
bool diskFull = false;
|
|
|
|
try {
|
|
|
|
/* Check the exit status. */
|
|
if (!statusOk(status)) {
|
|
|
|
diskFull |= cleanupDecideWhetherDiskFull();
|
|
|
|
auto msg = fmt("builder for '%s' %s",
|
|
yellowtxt(worker.store.printStorePath(drvPath)),
|
|
statusToString(status));
|
|
|
|
if (!logger->isVerbose() && !logTail.empty()) {
|
|
msg += fmt(";\nlast %d log lines:\n", logTail.size());
|
|
for (auto & line : logTail) {
|
|
msg += "> ";
|
|
msg += line;
|
|
msg += "\n";
|
|
}
|
|
auto nixLogCommand = experimentalFeatureSettings.isEnabled(Xp::NixCommand)
|
|
? "nix log"
|
|
: "nix-store -l";
|
|
msg += fmt("For full logs, run '" ANSI_BOLD "%s %s" ANSI_NORMAL "'.",
|
|
nixLogCommand,
|
|
worker.store.printStorePath(drvPath));
|
|
}
|
|
|
|
if (diskFull)
|
|
msg += "\nnote: build failure may have been caused by lack of free disk space";
|
|
|
|
throw BuildError(msg);
|
|
}
|
|
|
|
/* Compute the FS closure of the outputs and register them as
|
|
being valid. */
|
|
auto builtOutputs = registerOutputs();
|
|
|
|
StorePathSet outputPaths;
|
|
for (auto & [_, output] : builtOutputs)
|
|
outputPaths.insert(output.outPath);
|
|
runPostBuildHook(
|
|
worker.store,
|
|
*logger,
|
|
drvPath,
|
|
outputPaths
|
|
);
|
|
|
|
cleanupPostOutputsRegisteredModeNonCheck();
|
|
|
|
/* It is now safe to delete the lock files, since all future
|
|
lockers will see that the output paths are valid; they will
|
|
not create new lock files with the same names as the old
|
|
(unlinked) lock files. */
|
|
outputLocks.setDeletion(true);
|
|
outputLocks.unlock();
|
|
|
|
done(BuildResult::Built, std::move(builtOutputs));
|
|
|
|
} catch (BuildError & e) {
|
|
outputLocks.unlock();
|
|
|
|
BuildResult::Status st = BuildResult::MiscFailure;
|
|
|
|
if (hook && WIFEXITED(status) && WEXITSTATUS(status) == 101)
|
|
st = BuildResult::TimedOut;
|
|
|
|
else if (hook && (!WIFEXITED(status) || WEXITSTATUS(status) != 100)) {
|
|
}
|
|
|
|
else {
|
|
st =
|
|
dynamic_cast<NotDeterministic*>(&e) ? BuildResult::NotDeterministic :
|
|
statusOk(status) ? BuildResult::OutputRejected :
|
|
!derivationType.isSandboxed() || diskFull ? BuildResult::TransientFailure :
|
|
BuildResult::PermanentFailure;
|
|
}
|
|
|
|
done(st, {}, std::move(e));
|
|
return;
|
|
}
|
|
}
|
|
|
|
void DerivationGoal::resolvedFinished()
|
|
{
|
|
trace("resolved derivation finished");
|
|
|
|
assert(resolvedDrvGoal);
|
|
auto resolvedDrv = *resolvedDrvGoal->drv;
|
|
auto & resolvedResult = resolvedDrvGoal->buildResult;
|
|
|
|
DrvOutputs builtOutputs;
|
|
|
|
if (resolvedResult.success()) {
|
|
auto resolvedHashes = staticOutputHashes(worker.store, resolvedDrv);
|
|
|
|
StorePathSet outputPaths;
|
|
|
|
// `wantedOutputs` might merely indicate “all the outputs”
|
|
auto realWantedOutputs = std::visit(overloaded {
|
|
[&](const OutputsSpec::All &) {
|
|
return resolvedDrv.outputNames();
|
|
},
|
|
[&](const OutputsSpec::Names & names) {
|
|
return static_cast<std::set<std::string>>(names);
|
|
},
|
|
}, wantedOutputs.raw());
|
|
|
|
for (auto & wantedOutput : realWantedOutputs) {
|
|
auto initialOutput = get(initialOutputs, wantedOutput);
|
|
auto resolvedHash = get(resolvedHashes, wantedOutput);
|
|
if ((!initialOutput) || (!resolvedHash))
|
|
throw Error(
|
|
"derivation '%s' doesn't have expected output '%s' (derivation-goal.cc/resolvedFinished,resolve)",
|
|
worker.store.printStorePath(drvPath), wantedOutput);
|
|
|
|
auto realisation = [&]{
|
|
auto take1 = get(resolvedResult.builtOutputs, DrvOutput { *resolvedHash, wantedOutput });
|
|
if (take1) return *take1;
|
|
|
|
/* The above `get` should work. But sateful tracking of
|
|
outputs in resolvedResult, this can get out of sync with the
|
|
store, which is our actual source of truth. For now we just
|
|
check the store directly if it fails. */
|
|
auto take2 = worker.evalStore.queryRealisation(DrvOutput { *resolvedHash, wantedOutput });
|
|
if (take2) return *take2;
|
|
|
|
throw Error(
|
|
"derivation '%s' doesn't have expected output '%s' (derivation-goal.cc/resolvedFinished,realisation)",
|
|
worker.store.printStorePath(resolvedDrvGoal->drvPath), wantedOutput);
|
|
}();
|
|
|
|
if (drv->type().isPure()) {
|
|
auto newRealisation = realisation;
|
|
newRealisation.id = DrvOutput { initialOutput->outputHash, wantedOutput };
|
|
newRealisation.signatures.clear();
|
|
if (!drv->type().isFixed())
|
|
newRealisation.dependentRealisations = drvOutputReferences(worker.store, *drv, realisation.outPath);
|
|
signRealisation(newRealisation);
|
|
worker.store.registerDrvOutput(newRealisation);
|
|
}
|
|
outputPaths.insert(realisation.outPath);
|
|
builtOutputs.emplace(realisation.id, realisation);
|
|
}
|
|
|
|
runPostBuildHook(
|
|
worker.store,
|
|
*logger,
|
|
drvPath,
|
|
outputPaths
|
|
);
|
|
}
|
|
|
|
auto status = resolvedResult.status;
|
|
if (status == BuildResult::AlreadyValid)
|
|
status = BuildResult::ResolvesToAlreadyValid;
|
|
|
|
done(status, std::move(builtOutputs));
|
|
}
|
|
|
|
HookReply DerivationGoal::tryBuildHook()
|
|
{
|
|
if (!worker.tryBuildHook || !useDerivation) return rpDecline;
|
|
|
|
if (!worker.hook)
|
|
worker.hook = std::make_unique<HookInstance>();
|
|
|
|
try {
|
|
|
|
/* Send the request to the hook. */
|
|
worker.hook->sink
|
|
<< "try"
|
|
<< (worker.getNrLocalBuilds() < settings.maxBuildJobs ? 1 : 0)
|
|
<< drv->platform
|
|
<< worker.store.printStorePath(drvPath)
|
|
<< parsedDrv->getRequiredSystemFeatures();
|
|
worker.hook->sink.flush();
|
|
|
|
/* Read the first line of input, which should be a word indicating
|
|
whether the hook wishes to perform the build. */
|
|
std::string reply;
|
|
while (true) {
|
|
auto s = [&]() {
|
|
try {
|
|
return readLine(worker.hook->fromHook.readSide.get());
|
|
} catch (Error & e) {
|
|
e.addTrace({}, "while reading the response from the build hook");
|
|
throw;
|
|
}
|
|
}();
|
|
if (handleJSONLogMessage(s, worker.act, worker.hook->activities, true))
|
|
;
|
|
else if (s.substr(0, 2) == "# ") {
|
|
reply = s.substr(2);
|
|
break;
|
|
}
|
|
else {
|
|
s += "\n";
|
|
writeToStderr(s);
|
|
}
|
|
}
|
|
|
|
debug("hook reply is '%1%'", reply);
|
|
|
|
if (reply == "decline")
|
|
return rpDecline;
|
|
else if (reply == "decline-permanently") {
|
|
worker.tryBuildHook = false;
|
|
worker.hook = 0;
|
|
return rpDecline;
|
|
}
|
|
else if (reply == "postpone")
|
|
return rpPostpone;
|
|
else if (reply != "accept")
|
|
throw Error("bad hook reply '%s'", reply);
|
|
|
|
} catch (SysError & e) {
|
|
if (e.errNo == EPIPE) {
|
|
printError(
|
|
"build hook died unexpectedly: %s",
|
|
chomp(drainFD(worker.hook->fromHook.readSide.get())));
|
|
worker.hook = 0;
|
|
return rpDecline;
|
|
} else
|
|
throw;
|
|
}
|
|
|
|
hook = std::move(worker.hook);
|
|
|
|
try {
|
|
machineName = readLine(hook->fromHook.readSide.get());
|
|
} catch (Error & e) {
|
|
e.addTrace({}, "while reading the machine name from the build hook");
|
|
throw;
|
|
}
|
|
|
|
/* Tell the hook all the inputs that have to be copied to the
|
|
remote system. */
|
|
worker_proto::write(worker.store, hook->sink, inputPaths);
|
|
|
|
/* Tell the hooks the missing outputs that have to be copied back
|
|
from the remote system. */
|
|
{
|
|
StringSet missingOutputs;
|
|
for (auto & [outputName, status] : initialOutputs) {
|
|
// XXX: Does this include known CA outputs?
|
|
if (buildMode != bmCheck && status.known && status.known->isValid()) continue;
|
|
missingOutputs.insert(outputName);
|
|
}
|
|
worker_proto::write(worker.store, hook->sink, missingOutputs);
|
|
}
|
|
|
|
hook->sink = FdSink();
|
|
hook->toHook.writeSide = -1;
|
|
|
|
/* Create the log file and pipe. */
|
|
Path logFile = openLogFile();
|
|
|
|
std::set<int> fds;
|
|
fds.insert(hook->fromHook.readSide.get());
|
|
fds.insert(hook->builderOut.readSide.get());
|
|
worker.childStarted(shared_from_this(), fds, false, false);
|
|
|
|
return rpAccept;
|
|
}
|
|
|
|
|
|
DrvOutputs DerivationGoal::registerOutputs()
|
|
{
|
|
/* When using a build hook, the build hook can register the output
|
|
as valid (by doing `nix-store --import'). If so we don't have
|
|
to do anything here.
|
|
|
|
We can only early return when the outputs are known a priori. For
|
|
floating content-addressed derivations this isn't the case.
|
|
*/
|
|
return assertPathValidity();
|
|
}
|
|
|
|
Path DerivationGoal::openLogFile()
|
|
{
|
|
logSize = 0;
|
|
|
|
if (!settings.keepLog) return "";
|
|
|
|
auto baseName = std::string(baseNameOf(worker.store.printStorePath(drvPath)));
|
|
|
|
/* Create a log file. */
|
|
Path logDir;
|
|
if (auto localStore = dynamic_cast<LocalStore *>(&worker.store))
|
|
logDir = localStore->logDir;
|
|
else
|
|
logDir = settings.nixLogDir;
|
|
Path dir = fmt("%s/%s/%s/", logDir, LocalFSStore::drvsLogDir, baseName.substr(0, 2));
|
|
createDirs(dir);
|
|
|
|
Path logFileName = fmt("%s/%s%s", dir, baseName.substr(2),
|
|
settings.compressLog ? ".bz2" : "");
|
|
|
|
fdLogFile = open(logFileName.c_str(), O_CREAT | O_WRONLY | O_TRUNC | O_CLOEXEC, 0666);
|
|
if (!fdLogFile) throw SysError("creating log file '%1%'", logFileName);
|
|
|
|
logFileSink = std::make_shared<FdSink>(fdLogFile.get());
|
|
|
|
if (settings.compressLog)
|
|
logSink = std::shared_ptr<CompressionSink>(makeCompressionSink("bzip2", *logFileSink));
|
|
else
|
|
logSink = logFileSink;
|
|
|
|
return logFileName;
|
|
}
|
|
|
|
|
|
void DerivationGoal::closeLogFile()
|
|
{
|
|
auto logSink2 = std::dynamic_pointer_cast<CompressionSink>(logSink);
|
|
if (logSink2) logSink2->finish();
|
|
if (logFileSink) logFileSink->flush();
|
|
logSink = logFileSink = 0;
|
|
fdLogFile = -1;
|
|
}
|
|
|
|
|
|
bool DerivationGoal::isReadDesc(int fd)
|
|
{
|
|
return fd == hook->builderOut.readSide.get();
|
|
}
|
|
|
|
void DerivationGoal::handleChildOutput(int fd, std::string_view data)
|
|
{
|
|
// local & `ssh://`-builds are dealt with here.
|
|
auto isWrittenToLog = isReadDesc(fd);
|
|
if (isWrittenToLog)
|
|
{
|
|
logSize += data.size();
|
|
if (settings.maxLogSize && logSize > settings.maxLogSize) {
|
|
killChild();
|
|
done(
|
|
BuildResult::LogLimitExceeded, {},
|
|
Error("%s killed after writing more than %d bytes of log output",
|
|
getName(), settings.maxLogSize));
|
|
return;
|
|
}
|
|
|
|
for (auto c : data)
|
|
if (c == '\r')
|
|
currentLogLinePos = 0;
|
|
else if (c == '\n')
|
|
flushLine();
|
|
else {
|
|
if (currentLogLinePos >= currentLogLine.size())
|
|
currentLogLine.resize(currentLogLinePos + 1);
|
|
currentLogLine[currentLogLinePos++] = c;
|
|
}
|
|
|
|
if (logSink) (*logSink)(data);
|
|
}
|
|
|
|
if (hook && fd == hook->fromHook.readSide.get()) {
|
|
for (auto c : data)
|
|
if (c == '\n') {
|
|
auto json = parseJSONMessage(currentHookLine);
|
|
if (json) {
|
|
auto s = handleJSONLogMessage(*json, worker.act, hook->activities, true);
|
|
// ensure that logs from a builder using `ssh-ng://` as protocol
|
|
// are also available to `nix log`.
|
|
if (s && !isWrittenToLog && logSink && (*json)["type"] == resBuildLogLine) {
|
|
auto f = (*json)["fields"];
|
|
(*logSink)((f.size() > 0 ? f.at(0).get<std::string>() : "") + "\n");
|
|
}
|
|
}
|
|
currentHookLine.clear();
|
|
} else
|
|
currentHookLine += c;
|
|
}
|
|
}
|
|
|
|
|
|
void DerivationGoal::handleEOF(int fd)
|
|
{
|
|
if (!currentLogLine.empty()) flushLine();
|
|
worker.wakeUp(shared_from_this());
|
|
}
|
|
|
|
|
|
void DerivationGoal::flushLine()
|
|
{
|
|
if (handleJSONLogMessage(currentLogLine, *act, builderActivities, false))
|
|
;
|
|
|
|
else {
|
|
logTail.push_back(currentLogLine);
|
|
if (logTail.size() > settings.logLines) logTail.pop_front();
|
|
|
|
act->result(resBuildLogLine, currentLogLine);
|
|
}
|
|
|
|
currentLogLine = "";
|
|
currentLogLinePos = 0;
|
|
}
|
|
|
|
|
|
std::map<std::string, std::optional<StorePath>> DerivationGoal::queryPartialDerivationOutputMap()
|
|
{
|
|
assert(drv->type().isPure());
|
|
if (!useDerivation || drv->type().hasKnownOutputPaths()) {
|
|
std::map<std::string, std::optional<StorePath>> res;
|
|
for (auto & [name, output] : drv->outputs)
|
|
res.insert_or_assign(name, output.path(worker.store, drv->name, name));
|
|
return res;
|
|
} else {
|
|
return worker.store.queryPartialDerivationOutputMap(drvPath);
|
|
}
|
|
}
|
|
|
|
OutputPathMap DerivationGoal::queryDerivationOutputMap()
|
|
{
|
|
assert(drv->type().isPure());
|
|
if (!useDerivation || drv->type().hasKnownOutputPaths()) {
|
|
OutputPathMap res;
|
|
for (auto & [name, output] : drv->outputsAndOptPaths(worker.store))
|
|
res.insert_or_assign(name, *output.second);
|
|
return res;
|
|
} else {
|
|
return worker.store.queryDerivationOutputMap(drvPath);
|
|
}
|
|
}
|
|
|
|
|
|
std::pair<bool, DrvOutputs> DerivationGoal::checkPathValidity()
|
|
{
|
|
if (!drv->type().isPure()) return { false, {} };
|
|
|
|
bool checkHash = buildMode == bmRepair;
|
|
auto wantedOutputsLeft = std::visit(overloaded {
|
|
[&](const OutputsSpec::All &) {
|
|
return StringSet {};
|
|
},
|
|
[&](const OutputsSpec::Names & names) {
|
|
return static_cast<StringSet>(names);
|
|
},
|
|
}, wantedOutputs.raw());
|
|
DrvOutputs validOutputs;
|
|
|
|
for (auto & i : queryPartialDerivationOutputMap()) {
|
|
auto initialOutput = get(initialOutputs, i.first);
|
|
if (!initialOutput)
|
|
// this is an invalid output, gets catched with (!wantedOutputsLeft.empty())
|
|
continue;
|
|
auto & info = *initialOutput;
|
|
info.wanted = wantedOutputs.contains(i.first);
|
|
if (info.wanted)
|
|
wantedOutputsLeft.erase(i.first);
|
|
if (i.second) {
|
|
auto outputPath = *i.second;
|
|
info.known = {
|
|
.path = outputPath,
|
|
.status = !worker.store.isValidPath(outputPath)
|
|
? PathStatus::Absent
|
|
: !checkHash || worker.pathContentsGood(outputPath)
|
|
? PathStatus::Valid
|
|
: PathStatus::Corrupt,
|
|
};
|
|
}
|
|
auto drvOutput = DrvOutput{info.outputHash, i.first};
|
|
if (experimentalFeatureSettings.isEnabled(Xp::CaDerivations)) {
|
|
if (auto real = worker.store.queryRealisation(drvOutput)) {
|
|
info.known = {
|
|
.path = real->outPath,
|
|
.status = PathStatus::Valid,
|
|
};
|
|
} else if (info.known && info.known->isValid()) {
|
|
// We know the output because it's a static output of the
|
|
// derivation, and the output path is valid, but we don't have
|
|
// its realisation stored (probably because it has been built
|
|
// without the `ca-derivations` experimental flag).
|
|
worker.store.registerDrvOutput(
|
|
Realisation {
|
|
drvOutput,
|
|
info.known->path,
|
|
}
|
|
);
|
|
}
|
|
}
|
|
if (info.wanted && info.known && info.known->isValid())
|
|
validOutputs.emplace(drvOutput, Realisation { drvOutput, info.known->path });
|
|
}
|
|
|
|
// If we requested all the outputs, we are always fine.
|
|
// If we requested specific elements, the loop above removes all the valid
|
|
// ones, so any that are left must be invalid.
|
|
if (!wantedOutputsLeft.empty())
|
|
throw Error("derivation '%s' does not have wanted outputs %s",
|
|
worker.store.printStorePath(drvPath),
|
|
concatStringsSep(", ", quoteStrings(wantedOutputsLeft)));
|
|
|
|
bool allValid = true;
|
|
for (auto & [_, status] : initialOutputs) {
|
|
if (!status.wanted) continue;
|
|
if (!status.known || !status.known->isValid()) {
|
|
allValid = false;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return { allValid, validOutputs };
|
|
}
|
|
|
|
|
|
DrvOutputs DerivationGoal::assertPathValidity()
|
|
{
|
|
auto [allValid, validOutputs] = checkPathValidity();
|
|
if (!allValid)
|
|
throw Error("some outputs are unexpectedly invalid");
|
|
return validOutputs;
|
|
}
|
|
|
|
|
|
void DerivationGoal::done(
|
|
BuildResult::Status status,
|
|
DrvOutputs builtOutputs,
|
|
std::optional<Error> ex)
|
|
{
|
|
buildResult.status = status;
|
|
if (ex)
|
|
buildResult.errorMsg = fmt("%s", normaltxt(ex->info().msg));
|
|
if (buildResult.status == BuildResult::TimedOut)
|
|
worker.timedOut = true;
|
|
if (buildResult.status == BuildResult::PermanentFailure)
|
|
worker.permanentFailure = true;
|
|
|
|
mcExpectedBuilds.reset();
|
|
mcRunningBuilds.reset();
|
|
|
|
if (buildResult.success()) {
|
|
assert(!builtOutputs.empty());
|
|
buildResult.builtOutputs = std::move(builtOutputs);
|
|
if (status == BuildResult::Built)
|
|
worker.doneBuilds++;
|
|
} else {
|
|
if (status != BuildResult::DependencyFailed)
|
|
worker.failedBuilds++;
|
|
}
|
|
|
|
worker.updateProgress();
|
|
|
|
auto traceBuiltOutputsFile = getEnv("_NIX_TRACE_BUILT_OUTPUTS").value_or("");
|
|
if (traceBuiltOutputsFile != "") {
|
|
std::fstream fs;
|
|
fs.open(traceBuiltOutputsFile, std::fstream::out);
|
|
fs << worker.store.printStorePath(drvPath) << "\t" << buildResult.toString() << std::endl;
|
|
}
|
|
|
|
amDone(buildResult.success() ? ecSuccess : ecFailed, std::move(ex));
|
|
}
|
|
|
|
|
|
void DerivationGoal::waiteeDone(GoalPtr waitee, ExitCode result)
|
|
{
|
|
Goal::waiteeDone(waitee, result);
|
|
|
|
if (!useDerivation) return;
|
|
auto & fullDrv = *dynamic_cast<Derivation *>(drv.get());
|
|
|
|
auto * dg = dynamic_cast<DerivationGoal *>(&*waitee);
|
|
if (!dg) return;
|
|
|
|
auto outputs = fullDrv.inputDrvs.find(dg->drvPath);
|
|
if (outputs == fullDrv.inputDrvs.end()) return;
|
|
|
|
for (auto & outputName : outputs->second) {
|
|
auto buildResult = dg->getBuildResult(DerivedPath::Built {
|
|
.drvPath = dg->drvPath,
|
|
.outputs = OutputsSpec::Names { outputName },
|
|
});
|
|
if (buildResult.success()) {
|
|
for (auto & [output, realisation] : buildResult.builtOutputs) {
|
|
inputDrvOutputs.insert_or_assign(
|
|
{ dg->drvPath, output.outputName },
|
|
realisation.outPath);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
}
|