This adds new syntax for attribute names:
* attrs."${name}" => getAttr name attrs
* attrs ? "${name}" => isAttrs attrs && hasAttr attrs name
* attrs."${name}" or def => if attrs ? "${name}" then attrs."${name}" else def
* { "${name}" = value; } => listToAttrs [{ inherit name value; }]
Of course, it's a bit more complicated than that. The attribute chains
can be arbitrarily long and contain combinations of static and dynamic
parts (e.g. attrs."${foo}".bar."${baz}" or qux), which is relatively
straightforward for the getAttrs/hasAttrs cases but is more complex for
the listToAttrs case due to rules about duplicate attribute definitions.
For attribute sets with dynamic attribute names, duplicate static
attributes are detected at parse time while duplicate dynamic attributes
are detected when the attribute set is forced. So, for example, { a =
null; a.b = null; "${"c"}" = true; } will be a parse-time error, while
{ a = {}; "${"a"}".b = null; c = true; } will be an eval-time error
(technically that case could theoretically be detected at parse time,
but the general case would require full evaluation). Moreover, duplicate
dynamic attributes are not allowed even in cases where they would be
with static attributes ({ a.b.d = true; a.b.c = false; } is legal, but {
a."${"b"}".d = true; a."${"b"}".c = false; } is not). This restriction
might be relaxed in the future in cases where the static variant would
not be an error, but it is not obvious that that is desirable.
Finally, recursive attribute sets with dynamic attributes have the
static attributes in scope but not the dynamic ones. So rec { a = true;
"${"b"}" = a; } is equivalent to { a = true; b = true; } but rec {
"${"a"}" = true; b = a; } would be an error or use a from the
surrounding scope if it exists.
Note that the getAttr, getAttr or default, and hasAttr are all
implemented purely in the parser as syntactic sugar, while attribute
sets with dynamic attribute names required changes to the AST to be
implemented cleanly.
This is an alternative solution to and closes#167
Signed-off-by: Shea Levy <shea@shealevy.com>
Certain desugaring schemes may require the parser to use some builtin
function to do some of the work (e.g. currently `throw` is used to
lazily cause an error if a `<>`-style path is not in the search path)
Unfortunately, these names are not reserved keywords, so an expression
that uses such a syntactic sugar will not see the expected behavior
(see tests/lang/eval-okay-redefine-builtin.nix for an example).
This adds the ExprBuiltin AST type, which when evaluated uses the value
from the rootmost variable scope (which of course is initialized
internally and can't shadow any of the builtins).
Signed-off-by: Shea Levy <shea@shealevy.com>
Previously, a undefined variable inside a "with" caused an EvalError
(which can be caught), while outside, it caused a ParseError (which
cannot be caught). Now both cause an UndefinedVarError (which cannot
be caught).
This reduces the difference between inherited and non-inherited
attribute handling to the choice of which env to use (in recs and lets)
by setting the AttrDef::e to a new ExprVar in the parser rather than
carrying a separate AttrDef::v VarRef member.
As an added bonus, this allows inherited attributes that inherit from a
with to delay forcing evaluation of the with's attributes.
Signed-off-by: Shea Levy <shea@shealevy.com>
Functions in Nix are anonymous, but if they're assigned to a
variable/attribute, we can use the variable/attribute name in error
messages, e.g.
while evaluating `concatMapStrings' at `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/strings.nix:18:25':
...
write ‘attrs ? a.b’ to test whether ‘attrs’ has an attribute ‘a’
containing an attribute ‘b’. This is more convenient than ‘attrs ?
a && attrs.a ? b’.
Slight change in the semantics: it's no longer an error if the
left-hand side of ‘?’ is not an attribute set. In that case it just
returns false. So, ‘null ? foo’ no longer throws an error.
a pointer to a Value, rather than the Value directly. This improves
the effectiveness of garbage collection a lot: if the Value is
stored inside the set directly, then any live pointer to the Value
causes all other attributes in the set to be live as well.
errors with position info.
* For all positions, use the position of the first character of the
first token, rather than the last character of the first token plus
one.
use site, allowing environments to be stores as vectors of values
rather than maps. This should speed up evaluation and reduce the
number of allocations.
efficiently. The symbol table ensures that there is only one copy
of each symbol, thus allowing symbols to be compared efficiently
using a pointer equality test.
allowed. So `name1@name2', `{attrs1}@{attrs2}' and so on are now no
longer legal. This is no big loss because they were not useful
anyway.
This also changes the output of builtins.toXML for @-patterns
slightly.
shorthand for {x = {y = {z = ...;};};}. This is especially useful
for NixOS configuration files, e.g.
{
services = {
sshd = {
enable = true;
port = 2022;
};
};
}
can now be written as
{
services.sshd.enable = true;
services.sshd.port = 2022;
}
However, it is currently not permitted to write
{
services.sshd = {enable = true;};
services.sshd.port = 2022;
}
as this is considered a duplicate definition of `services.sshd'.
in attribute set pattern matches. This allows defining a function
that takes *at least* the listed attributes, while ignoring
additional attributes. For instance,
{stdenv, fetchurl, fuse, ...}:
stdenv.mkDerivation {
...
};
defines a function that requires an attribute set that contains the
specified attributes but ignores others. The main advantage is that
we can then write in all-packages.nix
aefs = import ../bla/aefs pkgs;
instead of
aefs = import ../bla/aefs {
inherit stdenv fetchurl fuse;
};
This saves a lot of typing (not to mention not having to update
all-packages.nix with purely mechanical changes). It saves as much
typing as the "args: with args;" style, but has the advantage that
the function arguments are properly declared (not implicit in what
the body of the "with" uses).
functions that take a single argument (plain lambdas) into one AST
node (Function) that contains a Pattern node describing the
arguments. Current patterns are single lazy arguments (VarPat) and
matching against an attribute set (AttrsPat).
This refactoring allows other kinds of patterns to be added easily,
such as Haskell-style @-patterns, or list pattern matching.
undefined variables by definition. This matters for the
implementation of "with", which does a call to checkVarDefs to see
if the body of the with has no undefined variables. (It can't be
checked at parse time because you don't know which variables are in
the "with" attribute set.) If we check closed terms, then we check
not just the with body but also the substituted terms, which are
typically very large. This is the cause of the poor nix-env
performance on Nixpkgs lately. It didn't happen earlier because
"with" wasn't used very often in the past.
This fix improves nix-env performance roughly 60x on current Nixpkgs.
nix-env -qa is down from 29.3s to 0.5s on my laptop, and nix-env -qa
--out-path is down from 229s to 3.39s. Not bad for a 1-line fix :-)
attribute) about installed packages in user environments. Thus, an
operation like `nix-env -q --description' shows useful information
not only on available packages but also on installed packages.
* nix-env now passes the entire manifest as an argument to the Nix
expression of the user environment builder (not just a list of
paths), so that in particular the user environment builder has
access to the meta attributes.
* New operation `--set-flag' in nix-env to change meta info of
installed packages. This will be useful to pass per-package
policies to the user environment builder (e.g., how to resolve
collision or whether to disable a package (NIX-80)) or upgrade
policies in nix-env (e.g., that a package should be "masked", that
is, left untouched by upgrade actions). Example:
$ nix-env --set-flag enabled false ghc-6.4
concatenation and string coercion. This was a big mess (see
e.g. NIX-67). Contexts are now folded into strings, so that they
don't cause evaluation errors when they're not expected. The
semantics of paths has been clarified (see nixexpr-ast.def).
toString() and coerceToString() have been merged.
Semantic change: paths are now copied to the store when they're in a
concatenation (and in most other situations - that's the
formalisation of the meaning of a path). So
"foo " + ./bla
evaluates to "foo /nix/store/hash...-bla", not "foo
/path/to/current-dir/bla". This prevents accidental impurities, and
is more consistent with the treatment of derivation outputs, e.g.,
`"foo " + bla' where `bla' is a derivation. (Here `bla' would be
replaced by the output path of `bla'.)
argument has a valid value, i.e., is in a certain domain. E.g.,
{ foo : [true false]
, bar : ["a" "b" "c"]
}: ...
This previously could be done using assertions, but domain checks
will allow the buildfarm to automatically extract the configuration
space from functions.
(closed(closed(closed(...)))) since this reduces performance by
producing bigger terms and killing caching (which incidentally also
prevents useful infinite recursion detection).
`derivations.cc', etc.
* Store the SHA-256 content hash of store paths in the database after
they have been built/added. This is so that we can check whether
the store has been messed with (a la `rpm --verify').
* When registering path validity, verify that the closure property
holds.
Instead we generate data bindings (build and match functions) for
the constructors specified in `constructors.def'. In particular
this removes the conversions between AFuns and strings, and Nix
expression evaluation now seems 3 to 4 times faster.
The expression `with E1; E2' evaluates to E2 with all bindings in
the attribute set E1 substituted. E.g.,
with {x = 123;}; x
evaluates to 123. That is, the attribute set E1 is in scope in E2.
This is particularly useful when importing files containing lots
definitions. E.g., instead of
let {
inherit (import ./foo.nix) a b c d e f;
body = ... a ... f ...;
}
we can now say
with import ./foo.nix;
... a ... f ...
I.e., we don't have to say what variables should be brought into scope.
print a nice backtrace of the stack, rather than vomiting a gigantic
(and useless) aterm on the screen. Example:
error: while evaluating file `.../pkgs/system/test.nix':
while evaluating attribute `subversion' at `.../pkgs/system/all-packages-generic.nix', line 533:
while evaluating function at `.../pkgs/applications/version-management/subversion/default.nix', line 1:
assertion failed at `.../pkgs/applications/version-management/subversion/default.nix', line 13
Since the Nix expression language is lazy, the trace may be
misleading. The purpose is to provide a hint as to the location of
the problem.
instead of `derivation' triggered a huge slowdown in the Nix
expression evaluator. Total execution time of `nix-env -qa' went up
by a factor of 60 or so.
This scalability problem was caused by expressions such as
(x: y: ... x ...) a b
where `a' is a large term (say, the one in
`all-packages-generic.nix'). Then the first beta-reduction would
produce
(y: ... a ...) b
by substituting `a' for `x'. The second beta-reduction would then
substitute `b' for `y' into the body `... a ...', which is a large
term due to `a', and thus causes a large traversal to be performed
by substitute() in the second reduction. This is however entirely
redundant, since `a' cannot contain free variables (since we never
substitute below a weak head normal form).
The solution is to wrap substituted terms into a `Closed'
constructor, i.e.,
subst(subs, Var(x)) = Closed(e) iff subs[x] = e
have substitution not descent into closed terms,
subst(subs, Closed(x)) = Closed(x)
and otherwise ignore them for evaluation,
eval(Closed(x)) = eval(x).
* Fix a typo that caused incorrect substitutions to be performed in
simple lambdas, e.g., `(x: x: x) a' would reduce to `(x: a)'.
`bla:' is now no longer parsed as a URL.
* Re-enabled support for the `args' attribute in derivations to
specify command line arguments to the builder, e.g.,
...
builder = /usr/bin/python;
args = ["-c" ./builder.py];
...
Nix. This is to prevent Berkeley DB from becoming wedged.
Unfortunately it is not possible to throw C++ exceptions from a
signal handler. In fact, you can't do much of anything except
change variables of type `volatile sig_atomic_t'. So we set an
interrupt flag in the signal handler and check it at various
strategic locations in the code (by calling checkInterrupt()).
Since this is unlikely to cover all cases (e.g., (semi-)infinite
loops), sometimes SIGTERM may now be required to kill Nix.
