In particular this causes copyStorePath() from HttpBinaryCacheStore to
only start a download if needed. E.g. if the destination LocalStore
goes to sleep waiting for the path lock and another process creates
the path, then LocalStore::addToStore() will never read from the
source so we don't have to do the download.
‘geteuid’ gives us the user that the command is being run as,
including in setuid modes. By using geteuid to determind id, we can
avoid the ‘sudo -i’ hack when upgrading Nix. So now, upgrading Nix on
macOS is as simple as:
$ sudo nix-channel --update
$ sudo nix-env -u
$ sudo launchctl stop org.nixos.nix-daemon
$ sudo launchctl start org.nixos.nix-daemon
or
$ sudo systemctl restart nix-daemon
This didn't work anymore since decompression was only done in the
non-coroutine case.
Decompressors are now sinks, just like compressors.
Also fixed a bug in bzip2 API handling (we have to handle BZ_RUN_OK
rather than BZ_OK), which we didn't notice because there was a missing
'throw':
if (ret != BZ_OK)
CompressionError("error while compressing bzip2 file");
This reduces memory consumption of
nix copy --from file://... --to ~/my-nix /nix/store/95cwv4q54dc6giaqv6q6p4r02ia2km35-blender-2.79
from 514 MiB to 18 MiB for an uncompressed binary cache, and from 192
MiB to 53 MiB for a bzipped binary cache. It may also be faster
because fetching can happen concurrently with decompression/writing.
Continuation of 48662d151b.
Issue https://github.com/NixOS/nix/issues/1681.
Allow global config settings to be defined in multiple Config
classes. For example, this means that libutil can have settings and
evaluator settings can be moved out of libstore. The Config classes
are registered in a new GlobalConfig class to which config files
etc. are applied.
Relevant to https://github.com/NixOS/nix/issues/2009 in that it
removes the need for ad hoc handling of useCaseHack, which was the
underlying cause of that issue.
For instance, this reduced the memory consumption of
$ nix copy --from ssh://localhost --to ~/my-nix /nix/store/1n7x0yv8vq6zi90hfmian84vdhd04bgp-blender-2.79a
from 632 MiB to 16 MiB.
E.g.
cannot build on 'ssh://mac1': cannot connect to 'mac1': bash: nix-store: command not found
cannot build on 'ssh://mac2': cannot connect to 'mac2': Host key verification failed.
cannot build on 'ssh://mac3': cannot connect to 'mac3': Received disconnect from 213... port 6001:2: Too many authentication failures
Authentication failed.
copyStorePath() now pipes the output of srcStore->narFromPath()
directly into dstStore->addToStore(). The sink used by the former is
converted into a source usable by the latter using
boost::coroutine2. This is based on [1].
This reduces the maximum resident size of
$ nix build --store ~/my-nix/ /nix/store/b0zlxla7dmy1iwc3g459rjznx59797xy-binutils-2.28.1 --substituters file:///tmp/binary-cache-xz/ --no-require-sigs
from 418592 KiB to 53416 KiB. (The previous commit also reduced the
runtime from ~4.2s to ~3.4s, not sure why.) A further improvement will
be to download files into a Sink.
[1] https://github.com/NixOS/nix/compare/master...Mathnerd314:dump-fix-coroutine#diff-dcbcac55a634031f9cc73707da6e4b18
Issue #1969.
It was holding on to a Value* (i.e. a std::shared_ptr<ValidPathInfo>*)
outside of the pathInfoCache lock, so the std::shared_ptr could be
destroyed between the release of the lock and the decrement of the
std::shared_ptr refcount. This can happen if more than
'path-info-cache-size' paths are added in the meantime, *or* if
clearPathInfoCache() is called. The hydra-queue-runner queue monitor
thread periodically calls the later, so is likely to trigger a crash.
Fixes https://github.com/NixOS/hydra/issues/542.
The assertion is broken because there is no one-to-one mapping from
length of a base64 string to the length of the output.
E.g.
"1q69lz7Empb06nzfkj651413n9icx0njmyr3xzq1j9q=" results in a 32-byte output.
"1q69lz7Empb06nzfkj651413n9icx0njmyr3xzq1j9qy" results in a 33-byte output.
To reproduce, evaluate:
builtins.derivationStrict {
name = "0";
builder = "0";
system = "0";
outputHashAlgo = "sha256";
outputHash = "1q69lz7Empb06nzfkj651413n9icx0njmyr3xzq1j9qy";
}
Found by afl-fuzz.
nix-store --export, nix-store --dump, and nix dump-path would previously
fail silently if writing the data out failed, because
a) FdSink::write ignored exceptions, and
b) the commands relied on FdSink's destructor, which ignores
exceptions, to flush the data out.
This could cause rather opaque issues with installing nixos, because
nix-store --export would happily proceed even if it couldn't write its
data out (e.g. if nix-store --import on the other side of the pipe
failed).
This commit adds tests that expose these issues in the nix-store
commands, and fixes them for all three.
All ANSI sequences except color setting are now filtered out. In
particular, terminal resets (such as from NixOS VM tests) are filtered
out.
Also, fix the completely broken tab character handling.
the case of hydra where the overhead of single threaded encoding is more
noticeable e.g most of the time spent in "Sending inputs"/"Receiving outputs"
is due to compression while the actual upload to the binary cache seems
to be negligible.
In this mode, the following restrictions apply:
* The builtins currentTime, currentSystem and storePath throw an
error.
* $NIX_PATH and -I are ignored.
* fetchGit and fetchMercurial require a revision hash.
* fetchurl and fetchTarball require a sha256 attribute.
* No file system access is allowed outside of the paths returned by
fetch{Git,Mercurial,url,Tarball}. Thus 'nix build -f ./foo.nix' is
not allowed.
Thus, the evaluation result is completely reproducible from the
command line arguments. E.g.
nix build --pure-eval '(
let
nix = fetchGit { url = https://github.com/NixOS/nixpkgs.git; rev = "9c927de4b179a6dd210dd88d34bda8af4b575680"; };
nixpkgs = fetchGit { url = https://github.com/NixOS/nixpkgs.git; ref = "release-17.09"; rev = "66b4de79e3841530e6d9c6baf98702aa1f7124e4"; };
in (import (nix + "/release.nix") { inherit nix nixpkgs; }).build.x86_64-linux
)'
The goal is to enable completely reproducible and traceable
evaluation. For example, a NixOS configuration could be fully
described by a single Git commit hash. 'nixos-rebuild' would do
something like
nix build --pure-eval '(
(import (fetchGit { url = file:///my-nixos-config; rev = "..."; })).system
')
where the Git repository /my-nixos-config would use further fetchGit
calls or Git externals to fetch Nixpkgs and whatever other
dependencies it has. Either way, the commit hash would uniquely
identify the NixOS configuration and allow it to reproduced.
* Look for both 'brotli' and 'bro' as external command,
since upstream has renamed it in newer versions.
If neither are found, current runtime behavior
is preserved: try to find 'bro' on PATH.
* Limit amount handed to BrotliEncoderCompressStream
to ensure interrupts are processed in a timely manner.
Testing shows negligible performance impact.
(Other compression sinks don't seem to require this)
For example, you can write
src = fetchgit ./.;
and if ./. refers to an unclean working tree, that tree will be copied
to the Nix store. This removes the need for "cleanSource".
Used to determine symlink size with stat and value with readlink.
This could technically result in garbage if symlink changed between
calls. Also gets around the broken stat implementation in our
network filesystem (returns size + 1 giving a byte of garbage).
The worker threads could exit prematurely if they finished processing
all items while the main thread was still adding items. In particular,
this caused hanging nix-store --serve processes in the build farm.
Also, process items from the main thread.
This is a hack to make hydra-queue-runner free its temproots
periodically, thereby ensuring that garbage collection of the
corresponding paths is not blocked until the queue runner is
restarted.
It would be better if temproots could be released earlier than at
process exit. I started working on a RAII object returned by functions
like addToStore() that releases temproots. However, this would be a
pretty massive change so I gave up on it for now.
In particular, process() won't return as long as there are active
items. This prevents work item lambdas from referring to stack frames
that no longer exist.
E.g.
nix run nixpkgs.hello -c hello --greeting Hallo
Note that unlike "nix-shell --command", no quoting of arguments is
necessary.
"-c" (short for "--command") cannot be combined with "--" because they
both consume all remaining arguments. But since installables shouldn't
start with a dash, this is unlikely to cause problems.
Besides being unused, this function has a bug that it will incorrectly
decode the path component Ubuntu\04016.04.2\040LTS\040amd64 as
"Ubuntu.04.2 LTS amd64" instead of "Ubuntu 16.04.2 LTS amd64".
The package list is now cached in
~/.cache/nix/package-search.json. This gives a substantial speedup to
"nix search" queries. For example (on an SSD):
First run: (no package search cache, cold page cache)
$ time nix search blender
Attribute name: nixpkgs.blender
Package name: blender
Version: 2.78c
Description: 3D Creation/Animation/Publishing System
real 0m6.516s
Second run: (package search cache populated)
$ time nix search blender
Attribute name: nixpkgs.blender
Package name: blender
Version: 2.78c
Description: 3D Creation/Animation/Publishing System
real 0m0.143s
Thus, instead of ‘--option <name> <value>’, you can write ‘--<name>
<value>’. So
--option http-connections 100
becomes
--http-connections 100
Apart from brevity, the difference is that it's not an error to set a
non-existent option via --option, but unrecognized arguments are
fatal.
Boolean options have special treatment: they're mapped to the
argument-less flags ‘--<name>’ and ‘--no-<name>’. E.g.
--option auto-optimise-store false
becomes
--no-auto-optimise-store
This caused "nix-store --import" to compute an incorrect hash on NARs
that don't fit in an unsigned int. The import would succeed, but
"nix-store --verify-path" or subsequent exports would detect an
incorrect hash.
A deeper issue is that the export/import format does not contain a
hash, so we can't detect such issues early.
Also, I learned that -Wall does not warn about this.
The typical use is to inherit Config and add Setting<T> members:
class MyClass : private Config
{
Setting<int> foo{this, 123, "foo", "the number of foos to use"};
Setting<std::string> bar{this, "blabla", "bar", "the name of the bar"};
MyClass() : Config(readConfigFile("/etc/my-app.conf"))
{
std::cout << foo << "\n"; // will print 123 unless overriden
}
};
Currently, this is used by Store and its subclasses for store
parameters. You now get a warning if you specify a non-existant store
parameter in a store URI.
This is useless because the client also caches path info, and can
cause problems for long-running clients like hydra-queue-runner
(i.e. it may return cached info about paths that have been
garbage-collected).
You can now set the store parameter "text-compression=br" to compress
textual files in the binary cache (i.e. narinfo and logs) using
Brotli. This sets the Content-Encoding header; the extension of
compressed files is unchanged.
You can separately specify the compression of log files using
"log-compression=br". This is useful when you don't want to compress
narinfo files for backward compatibility.
Build logs on cache.nixos.org are compressed using Brotli (since this
allows them to be decompressed automatically by Chrome and Firefox),
so it's handy if "nix log" can decompress them.
* Unify SSH code in SSHStore and LegacySSHStore.
* Fix a race starting the SSH master. We now wait synchronously for
the SSH master to finish starting. This prevents the SSH clients
from starting their own connections.
* Don't use a master if max-connections == 1.
* Add a "max-connections" store parameter.
* Add a "compress" store parameter.
This allows <nix/fetchurl.nix> to fetch private Git/Mercurial
repositories, e.g.
import <nix/fetchurl.nix> {
url = https://edolstra@bitbucket.org/edolstra/my-private-repo/get/80a14018daed.tar.bz2;
sha256 = "1mgqzn7biqkq3hf2697b0jc4wabkqhmzq2srdymjfa6sb9zb6qs7";
}
where /etc/nix/netrc contains:
machine bitbucket.org
login edolstra
password blabla...
This works even when sandboxing is enabled.
To do: add unpacking support (i.e. fetchzip functionality).
This adds support for s3:// URIs in all places where Nix allows URIs,
e.g. in builtins.fetchurl, builtins.fetchTarball, <nix/fetchurl.nix>
and NIX_PATH. It allows fetching resources from private S3 buckets,
using credentials obtained from the standard places (i.e. AWS_*
environment variables, ~/.aws/credentials and the EC2 metadata
server). This may not be super-useful in general, but since we already
depend on aws-sdk-cpp, it's a cheap feature to add.
Because config.h can #define things like _FILE_OFFSET_BITS=64 and not
every compilation unit includes config.h, we currently compile half of
Nix with _FILE_OFFSET_BITS=64 and other half with _FILE_OFFSET_BITS
unset. This causes major havoc with the Settings class on e.g. 32-bit ARM,
where different compilation units disagree with the struct layout.
E.g.:
diff --git a/src/libstore/globals.cc b/src/libstore/globals.cc
@@ -166,6 +166,8 @@ void Settings::update()
_get(useSubstitutes, "build-use-substitutes");
+ fprintf(stderr, "at Settings::update(): &useSubstitutes = %p\n", &nix::settings.useSubstitutes);
_get(buildUsersGroup, "build-users-group");
diff --git a/src/libstore/remote-store.cc b/src/libstore/remote-store.cc
+++ b/src/libstore/remote-store.cc
@@ -138,6 +138,8 @@ void RemoteStore::initConnection(Connection & conn)
void RemoteStore::setOptions(Connection & conn)
{
+ fprintf(stderr, "at RemoteStore::setOptions(): &useSubstitutes = %p\n", &nix::settings.useSubstitutes);
conn.to << wopSetOptions
Gave me:
at Settings::update(): &useSubstitutes = 0xb6e5c5cb
at RemoteStore::setOptions(): &useSubstitutes = 0xb6e5c5c7
That was not a fun one to debug!
This closes a long-time bug that allowed builds to hang Nix
indefinitely (regardless of timeouts) simply by doing
exec > /dev/null 2>&1; while true; do true; done
Now, on EOF, we just send SIGKILL to the child to make sure it's
really gone.
This allows other threads to install callbacks that run in a regular,
non-signal context. In particular, we can use this to signal the
downloader thread to quit.
Closes#1183.
It failed with
AWS error uploading ‘6gaxphsyhg66mz0a00qghf9nqf7majs2.ls.xz’: Unable to parse ExceptionName: MissingContentLength Message: You must provide the Content-Length HTTP header.
possibly because the istringstream_nocopy introduced in
0d2ebb4373 doesn't supply the seek
method that the AWS library expects. So bring back the old version,
but only for S3BinaryCacheStore.
We can now write
throw Error("file '%s' not found", path);
instead of
throw Error(format("file '%s' not found") % path);
and similarly
printError("file '%s' not found", path);
instead of
printMsg(lvlError, format("file '%s' not found") % path);
We were passing "p=$PATH" rather than "p=$PATH;", resulting in some
invalid shell code.
Also, construct a separate environment for the child rather than
overwriting the parent's.
The fact that queryPathInfo() is synchronous meant that we needed a
thread for every concurrent binary cache lookup, even though they end
up being handled by the same download thread. Requiring hundreds of
threads is not a good idea. So now there is an asynchronous version of
queryPathInfo() that takes a callback function to process the
result. Similarly, enqueueDownload() now takes a callback rather than
returning a future.
Thus, a command like
nix path-info --store https://cache.nixos.org/ -r /nix/store/slljrzwmpygy1daay14kjszsr9xix063-nixos-16.09beta231.dccf8c5
that returns 4941 paths now takes 1.87s using only 2 threads (the main
thread and the downloader thread). (This is with a prewarmed
CloudFront.)
This fixes instantiation of pythonPackages.pytest that produces a
directory with less permissions during one of it's tests that leads to
a nix error like:
error: opening directory ‘/tmp/nix-build-python2.7-pytest-2.9.2.drv-0/pytest-of-user/pytest-0/testdir/test_cache_failure_warns0/.cache’: Permission denied
E.g.
$ nix-build -I nixpkgs=git://github.com/NixOS/nixpkgs '<nixpkgs>' -A hello
This is not extremely useful yet because you can't specify a
branch/revision.
Caching path info is generally useful. For instance, it speeds up "nix
path-info -rS /run/current-system" (i.e. showing the closure sizes of
all paths in the closure of the current system) from 5.6s to 0.15s.
This also eliminates some APIs like Store::queryDeriver() and
Store::queryReferences().
The flag remembering whether an Interrupted exception was thrown is
now thread-local. Thus, all threads will (eventually) throw
Interrupted. Previously, one thread would throw Interrupted, and then
the other threads wouldn't see that they were supposed to quit.
Unlike "nix-store --verify-path", this command verifies signatures in
addition to store path contents, is multi-threaded (especially useful
when verifying binary caches), and has a progress indicator.
Example use:
$ nix verify-paths --store https://cache.nixos.org -r $(type -p thunderbird)
...
[17/132 checked] checking ‘/nix/store/rawakphadqrqxr6zri2rmnxh03gqkrl3-autogen-5.18.6’
This allows a RemoteStore object to be used safely from multiple
threads concurrently. It will make multiple daemon connections if
necessary.
Note: pool.hh and sync.hh have been copied from the Hydra source tree.
Also, move a few free-standing functions into StoreAPI and Derivation.
Also, introduce a non-nullable smart pointer, ref<T>, which is just a
wrapper around std::shared_ptr ensuring that the pointer is never
null. (For reference-counted values, this is better than passing a
"T&", because the latter doesn't maintain the refcount. Usually, the
caller will have a shared_ptr keeping the value alive, but that's not
always the case, e.g., when passing a reference to a std::thread via
std::bind.)
edolstra:
“…since callers of readDirectory have to handle the possibility of
DT_UNKNOWN anyway, and we don't want to do a stat call for every
directory entry unless it's really needed.”
Previously, to build a derivation remotely, we had to copy the entire
closure of the .drv file to the remote machine, even though we only
need the top-level derivation. This is very wasteful: the closure can
contain thousands of store paths, and in some Hydra use cases, include
source paths that are very large (e.g. Git/Mercurial checkouts).
So now there is a new operation, StoreAPI::buildDerivation(), that
performs a build from an in-memory representation of a derivation
(BasicDerivation) rather than from a on-disk .drv file. The only files
that need to be in the Nix store are the sources of the derivation
(drv.inputSrcs), and the needed output paths of the dependencies (as
described by drv.inputDrvs). "nix-store --serve" exposes this
interface.
Note that this is a privileged operation, because you can construct a
derivation that builds any store path whatsoever. Fixing this will
require changing the hashing scheme (i.e., the output paths should be
computed from the other fields in BasicDerivation, allowing them to be
verified without access to other derivations). However, this would be
quite nice because it would allow .drv-free building (e.g. "nix-env
-i" wouldn't have to write any .drv files to disk).
Fixes#173.
Sodium's Ed25519 signatures are much shorter than OpenSSL's RSA
signatures. Public keys are also much shorter, so they're now
specified directly in the nix.conf option ‘binary-cache-public-keys’.
The new command ‘nix-store --generate-binary-cache-key’ generates and
prints a public and secret key.
Let's not just improve the error message itself, but also the behaviour
to actually work around the ntfs-3g symlink bug. If the readlink() call
returns a smaller size than the stat() call, this really isn't a problem
even if the symlink target really has changed between the calls.
So if stat() reports the size for the absolute path, it's most likely
that the relative path is smaller and thus it should also work for file
system bugs as mentioned in 93002d69fc58c2b71e2dfad202139230c630c53a.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Tested-by: John Ericson <Ericson2314@Yahoo.com>
A message like "error: reading symbolic link `...' : Success" really is
quite confusing, so let's not indicate "success" but rather point out
the real issue.
We could also limit the check of this to just check for non-negative
values, but this would introduce a race condition between stat() and
readlink() if the link target changes between those two calls, thus
leading to a buffer overflow vulnerability.
Reported by @Ericson2314 on IRC. Happened due to a possible ntfs-3g bug
where a relative symlink returned the absolute path (st_)size in stat()
while readlink() returned the relative size.
Signed-off-by: aszlig <aszlig@redmoonstudios.org>
Tested-by: John Ericson <Ericson2314@Yahoo.com>
In low memory environments, "nix-env -qa" failed because the fork to
run the pager hit the kernel's overcommit limits. Using posix_spawn
gets around this. (Actually, you have to use posix_spawn with the
undocumented POSIX_SPAWN_USEVFORK flag, otherwise it just uses
fork/exec...)
The function ‘builtins.match’ takes a POSIX extended regular
expression and an arbitrary string. It returns ‘null’ if the string
does not match the regular expression. Otherwise, it returns a list
containing substring matches corresponding to parenthesis groups in
the regex. The regex must match the entire string (i.e. there is an
implied "^<pat>$" around the regex). For example:
match "foo" "foobar" => null
match "foo" "foo" => []
match "f(o+)(.*)" "foooobar" => ["oooo" "bar"]
match "(.*/)?([^/]*)" "/dir/file.nix" => ["/dir/" "file.nix"]
match "(.*/)?([^/]*)" "file.nix" => [null "file.nix"]
The following example finds all regular files with extension .nix or
.patch underneath the current directory:
let
findFiles = pat: dir: concatLists (mapAttrsToList (name: type:
if type == "directory" then
findFiles pat (dir + "/" + name)
else if type == "regular" && match pat name != null then
[(dir + "/" + name)]
else []) (readDir dir));
in findFiles ".*\\.(nix|patch)" (toString ./.)
This was preventing destructors from running. In particular, it was
preventing the deletion of the temproot file for each worker
process. It may also have been responsible for the excessive WAL
growth on Hydra (due to the SQLite database not being closed
properly).
Apparently broken by accident in
8e9140cfde.
In particular, gcc 4.6's std::exception::~exception has an exception
specification in c++0x mode, which requires us to use that deprecated
feature in nix (and led to breakage after some recent changes that were
valid c++11).
nix already uses several c++11 features and gcc 4.7 has been around for
over 2 years.
Signal handlers are process-wide, so sending SIGINT to the monitor
thread will cause the normal SIGINT handler to run. This sets the
isInterrupted flag, which is not what we want. So use pthread_cancel
instead.
The thread calls poll() to wait until a HUP (or other error event)
happens on the client connection. If so, it sends SIGINT to the main
thread, which is then cleaned up normally. This is much nicer than
messing around with SIGPOLL.
When running NixOps under Mac OS X, we need to be able to import store
paths built on Linux into the local Nix store. However, HFS+ is
usually case-insensitive, so if there are directories with file names
that differ only in case, then importing will fail.
The solution is to add a suffix ("~nix~case~hack~<integer>") to
colliding files. For instance, if we have a directory containing
xt_CONNMARK.h and xt_connmark.h, then the latter will be renamed to
"xt_connmark.h~nix~case~hack~1". If a store path is dumped as a NAR,
the suffixes are removed. Thus, importing and exporting via a
case-insensitive Nix store is round-tripping. So when NixOps calls
nix-copy-closure to copy the path to a Linux machine, you get the
original file names back.
Closes#119.
If a build log is not available locally, then ‘nix-store -l’ will now
try to download it from the servers listed in the ‘log-servers’ option
in nix.conf. For instance, if you have:
log-servers = http://hydra.nixos.org/log
then it will try to get logs from http://hydra.nixos.org/log/<base
name of the store path>. So you can do things like:
$ nix-store -l $(which xterm)
and get a log even if xterm wasn't built locally.
Ludo reported this error:
unexpected Nix daemon error: boost::too_few_args: format-string refered to more arguments than were passed
coming from this line:
printMsg(lvlError, run.program + ": " + string(err, 0, p));
The problem here is that the string ends up implicitly converted to a
Boost format() object, so % characters are treated specially. I
always assumed (wrongly) that strings are converted to a format object
that outputs the string as-is.
Since this assumption appears in several places that may be hard to
grep for, I've added some C++ type hackery to ensures that the right
thing happens. So you don't have to worry about % in statements like
printMsg(lvlError, "foo: " + s);
or
throw Error("foo: " + s);
In particular "libutil" was always a problem because it collides with
Glibc's libutil. Even if we install into $(libdir)/nix, the linker
sometimes got confused (e.g. if a program links against libstore but
not libutil, then ld would report undefined symbols in libstore
because it was looking at Glibc's libutil).
As discovered by Todd Veldhuizen, the shell started by nix-shell has
its affinity set to a single CPU. This is because nix-shell connects
to the Nix daemon, which causes the affinity hack to be applied. So
we turn this off for Perl programs.
On a system with multiple CPUs, running Nix operations through the
daemon is significantly slower than "direct" mode:
$ NIX_REMOTE= nix-instantiate '<nixos>' -A system
real 0m0.974s
user 0m0.875s
sys 0m0.088s
$ NIX_REMOTE=daemon nix-instantiate '<nixos>' -A system
real 0m2.118s
user 0m1.463s
sys 0m0.218s
The main reason seems to be that the client and the worker get moved
to a different CPU after every call to the worker. This patch adds a
hack to lock them to the same CPU. With this, the overhead of going
through the daemon is very small:
$ NIX_REMOTE=daemon nix-instantiate '<nixos>' -A system
real 0m1.074s
user 0m0.809s
sys 0m0.098s
The kill(2) in Apple's libc follows POSIX semantics, which means that
kill(-1, SIGKILL) will kill the calling process too. Since nix has no
way to distinguish between the process successfully killing everything
and the process being killed by a rogue builder in that case, it can't
safely conclude that killUser was successful.
Luckily, the actual kill syscall takes a parameter that determines
whether POSIX semantics are followed, so we can call that syscall
directly and avoid the issue on Apple.
Signed-off-by: Shea Levy <shea@shealevy.com>
For instance, it's pointless to keep copy-from-other-stores running if
there are no other stores, or download-using-manifests if there are no
manifests. This also speeds things up because we don't send queries
to those substituters.
For example, given a derivation with outputs "out", "man" and "bin":
$ nix-build -A pkg
produces ./result pointing to the "out" output;
$ nix-build -A pkg.man
produces ./result-man pointing to the "man" output;
$ nix-build -A pkg.all
produces ./result, ./result-man and ./result-bin;
$ nix-build -A pkg.all -A pkg2
produces ./result, ./result-man, ./result-bin and ./result-2.
Using the immutable bit is problematic, especially in conjunction with
store optimisation. For instance, if the garbage collector deletes a
file, it has to clear its immutable bit, but if the file has
additional hard links, we can't set the bit afterwards because we
don't know the remaining paths.
So now that we support having the entire Nix store as a read-only
mount, we may as well drop the immutable bit. Unfortunately, we have
to keep the code to clear the immutable bit for backwards
compatibility.
"config.h" must be included first, because otherwise the compiler
might not see the right value of _FILE_OFFSET_BITS. We've had this
before; see 705868a8a9. In this case,
GCC would compute a different address for ‘settings.useSubstitutes’ in
misc.cc because of the off_t in ‘settings’.
Reverts 3854fc9b42.
http://hydra.nixos.org/build/3016700
This is required on systemd, which mounts filesystems as "shared"
subtrees. Changes to shared trees in a private mount namespace are
propagated to the outside world, which is bad.
Setting the environment variable NIX_COUNT_CALLS to 1 enables some
basic profiling in the evaluator. It will count calls to functions
and primops as well as evaluations of attributes.
For example, to see where evaluation of a NixOS configuration spends
its time:
$ NIX_SHOW_STATS=1 NIX_COUNT_CALLS=1 ./src/nix-instantiate/nix-instantiate '<nixos>' -A system --readonly-mode
...
calls to 39 primops:
239532 head
233962 tail
191252 hasAttr
...
calls to 1595 functions:
224157 `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/lists.nix:17:19'
221767 `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/lists.nix:17:14'
221767 `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/lists.nix:17:10'
...
evaluations of 7088 attributes:
167377 undefined position
132459 `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/attrsets.nix:119:41'
47322 `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/attrsets.nix:13:21'
...
In a private PID namespace, processes have PIDs that are separate from
the rest of the system. The initial child gets PID 1. Processes in
the chroot cannot see processes outside of the chroot. This improves
isolation between builds. However, processes on the outside can see
processes in the chroot and send signals to them (if they have
appropriate rights).
Since the builder gets PID 1, it serves as the reaper for zombies in
the chroot. This might turn out to be a problem. In that case we'll
need to have a small PID 1 process that sits in a loop calling wait().
Nix now requires SQLite and bzip2 to be pre-installed. SQLite is
detected using pkg-config. We required DBD::SQLite anyway, so
depending on SQLite is not a big problem.
The --with-bzip2, --with-openssl and --with-sqlite flags are gone.
I was bitten one time too many by Python modifying the Nix store by
creating *.pyc files when run as root. On Linux, we can prevent this
by setting the immutable bit on files and directories (as in ‘chattr
+i’). This isn't supported by all filesystems, so it's not an error
if setting the bit fails. The immutable bit is cleared by the garbage
collector before deleting a path. The only tricky aspect is in
optimiseStore(), since it's forbidden to create hard links to an
immutable file. Thus optimiseStore() temporarily clears the immutable
bit before creating the link.
unreachable paths. This matters when using --max-freed etc.:
unreachable paths could become reachable again, so it's nicer to
keep them if there is "real" garbage to be deleted. Also, don't use
readDirectory() but read the Nix store and delete invalid paths in
parallel. This reduces GC latency on very large Nix stores.
* Buffer the HashSink. This speeds up hashing a bit because it
prevents lots of calls to the hash update functions (e.g. nix-hash
went from 9.3s to 8.7s of user time on the closure of my
/var/run/current-system).
significantly cuts down the number of syscalls (e.g., for "nix-store
-qR /var/run/current-system" via the daemon, it reduced the number
of syscalls in the client from 29134 to 4766 and in the daemon from
44266 to 20666).
because it defines _FILE_OFFSET_BITS. Without this, on
OpenSolaris the system headers define it to be 32, and then
the 32-bit stat() ends up being called with a 64-bit "struct
stat", or vice versa.
This also ensures that we get 64-bit file sizes everywhere.
* Remove the redundant call to stat() in parseExprFromFile().
The file cannot be a symlink because that's the exit condition
of the loop before.
exception handler, otherwise throw an exception. We need to ignore
write errors in exception handlers to ensure that cleanup code runs
to completion if the other side of stderr has been closed
unexpectedly.
hook script proper, and the stdout/stderr of the builder. Only the
latter should be saved in /nix/var/log/nix/drvs.
* Allow the verbosity to be set through an option.
* Added a flag --quiet to lower the verbosity level.
it requires a certain feature on the build machine, e.g.
requiredSystemFeatures = [ "kvm" ];
We need this in Hydra to make sure that builds that require KVM
support are forwarded to machines that have KVM support. Probably
this should also be enforced for local builds.
changed. This prevents corrupt paths from spreading to other
machines. Note that checking the hash is cheap because we're
hashing anyway (because of the --sign feature).
_FILE_OFFSET_BITS=64. Without it, functions like stat() fail on
large file sizes. This happened with a Nix store on squashfs:
$ nix-store --dump /tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds > /dev/null
error: getting attributes of path `/tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds': Value too large for defined data type
$ stat /tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds
File: `/tmp/mnt/46wzqnk4cbdwh1dclhrpqnnz1icak6n7-local-net-cmds'
Size: 0 Blocks: 36028797018963968 IO Block: 1024 regular empty file
(This is a bug in squashfs or mksquashfs, but it shouldn't cause Nix
to fail.)
NixOS evaluation errors in particular look intimidating and
generally aren't very useful. Ideally the builtins.throw messages
should be self-contained.
would just silently store only (fileSize % 2^32) bytes.
* Use posix_fallocate if available when unpacking archives.
* Provide a better error message when trying to unpack something that
isn't a NAR archive.
nix-store -r (or some other operation) is started via ssh, it will
at least have a chance of terminating quickly when the connection is
killed. Right now it just runs to completion, because it never
notices that stderr is no longer connected to anything. Of course
it would be better if sshd would just send a SIGHUP, but it doesn't
(https://bugzilla.mindrot.org/show_bug.cgi?id=396).
order of ascending last access time. This is useful in conjunction
with --max-freed or --max-links to prefer deleting non-recently used
garbage, which is good (especially in the build farm) since garbage
may become live again.
The code could easily be modified to accept other criteria for
ordering garbage by changing the comparison operator used by the
priority queue in collectGarbage().
~/.nix-defexpr, otherwise the attribute cannot be selected with the
`-A' option. Useful if you want to stick a Nix expression directly
in ~/.nix-defexpr.
again. (After the previous substituter mechanism refactoring I
didn't update the code that obtains the references of substitutable
paths.) This required some refactoring: the substituter programs
are now kept running and receive/respond to info requests via
stdin/stdout.
/tmp/nix-<pid>-<counter> for temporary build directories. This
increases purity a bit: many packages store the temporary build path
in their output, causing (generally unimportant) binary differences.
$ nix-env -e $(which firefox)
or
$ nix-env -e /nix/store/nywzlygrkfcgz7dfmhm5xixlx1l0m60v-pan-0.132
* nix-env -i: if an argument contains a slash anywhere, treat it as a
path and follow it through symlinks into the Nix store. This allows
things like
$ nix-build -A firefox
$ nix-env -i ./result
* nix-env -q/-i/-e: don't complain when the `*' selector doesn't match
anything. In particular, `nix-env -q \*' doesn't fail anymore on an
empty profile.
executed in a chroot that contains just the Nix store, the temporary
build directory, and a configurable set of additional directories
(/dev and /proc by default). This allows a bit more purity
enforcement: hidden build-time dependencies on directories such as
/usr or /nix/var/nix/profiles are no longer possible. As an added
benefit, accidental network downloads (cf. NIXPKGS-52) are prevented
as well (because files such as /etc/resolv.conf are not available in
the chroot).
However the usefulness of chroots is diminished by the fact that
many builders depend on /bin/sh, so you need /bin in the list of
additional directories. (And then on non-NixOS you need /lib as
well...)
Nix expressions in that directory are combined into an attribute set
{file1 = import file1; file2 = import file2; ...}, i.e. each Nix
expression is an attribute with the file name as the attribute
name. Also recurses into directories.
* nix-env: removed the "--import" (-I) option which set the
~/.nix-defexpr symlink.
* nix-channel: don't use "nix-env --import", instead symlink
~/.nix-defexpr/channels. So finally nix-channel --update doesn't
override any default Nix expressions but combines with them.
This means that you can have (say) a local Nixpkgs SVN tree and use
it as a default for nix-env:
$ ln -s .../path-to-nixpkgs-tree ~/.nix-defexpr/nixpkgs_svn
and be subscribed to channels (including Nixpkgs) at the same time.
(If there is any ambiguity, the -A flag can be used to
disambiguate, e.g. "nix-env -i -A nixpkgs_svn.pan".)
need any info on substitutable paths, we just call the substituters
(such as download-using-manifests.pl) directly. This means that
it's no longer necessary for nix-pull to register substitutes or for
nix-channel to clear them, which makes those operations much faster
(NIX-95). Also, we don't have to worry about keeping nix-pull
manifests (in /nix/var/nix/manifests) and the database in sync with
each other.
The downside is that there is some overhead in calling an external
program to get the substitutes info. For instance, "nix-env -qas"
takes a bit longer.
Abolishing the substitutes table also makes the logic in
local-store.cc simpler, as we don't need to store info for invalid
paths. On the downside, you cannot do things like "nix-store -qR"
on a substitutable but invalid path (but nobody did that anyway).
* Never catch interrupts (the Interrupted exception).
--export' into the Nix store, and optionally check the cryptographic
signatures against /nix/etc/nix/signing-key.pub. (TODO: verify
against a set of public keys.)
from a source directory. All files for which a predicate function
returns true are copied to the store. Typical example is to leave
out the .svn directory:
stdenv.mkDerivation {
...
src = builtins.filterSource
(path: baseNameOf (toString path) != ".svn")
./source-dir;
# as opposed to
# src = ./source-dir;
}
This is important because the .svn directory influences the hash in
a rather unpredictable and variable way.
process, so forward the operation.
* Spam the user about GC misconfigurations (NIX-71).
* findRoots: skip all roots that are unreadable - the warnings with
which we spam the user should be enough.
via the Unix domain socket in /nix/var/nix/daemon.socket. The
server forks a worker process per connection.
* readString(): use the heap, not the stack.
* Some protocol fixes.
mode. Presumably nix-worker would be setuid to the Nix store user.
The worker performs all operations on the Nix store and database, so
the caller can be completely unprivileged.
This is already much more secure than the old setuid scheme, since
the worker doesn't need to do Nix expression evaluation and so on.
Most importantly, this means that it doesn't need to access any user
files, with all resulting security risks; it only performs pure
store operations.
Once this works, it is easy to move to a daemon model that forks off
a worker for connections established through a Unix domain socket.
That would be even more secure.
* Some refactoring: put the NAR archive integer/string serialisation
code in a separate file so it can be reused by the worker protocol
implementation.
Rather, setuid support is now always compiled in (at least on
platforms that have the setresuid system call, e.g., Linux and
FreeBSD), but it must enabled by chowning/chmodding the Nix
binaries.
concatenation and string coercion. This was a big mess (see
e.g. NIX-67). Contexts are now folded into strings, so that they
don't cause evaluation errors when they're not expected. The
semantics of paths has been clarified (see nixexpr-ast.def).
toString() and coerceToString() have been merged.
Semantic change: paths are now copied to the store when they're in a
concatenation (and in most other situations - that's the
formalisation of the meaning of a path). So
"foo " + ./bla
evaluates to "foo /nix/store/hash...-bla", not "foo
/path/to/current-dir/bla". This prevents accidental impurities, and
is more consistent with the treatment of derivation outputs, e.g.,
`"foo " + bla' where `bla' is a derivation. (Here `bla' would be
replaced by the output path of `bla'.)
implementations of MD5, SHA-1 and SHA-256. The main benefit is that
we get assembler-optimised implementations of MD5 and SHA-1 (though
not SHA-256 (at least on x86), unfortunately). OpenSSL's SHA-1
implementation on Intel is twice as fast as ours.
* Set the references for the user environment manifest properly.
* Don't copy the manifest (this was accidental).
* Don't store derivation paths in the manifest (maybe this should be
made optional). This cleans up the semantics of nix-env, which were
weird.
* Hash on the output paths of activated components, not on derivation
paths. This is because we don't know the derivation path of already
installed components anymore, and it allows the installation of
components by store path (skipping Nix expressions entirely).
* Query options `--out-path' and `--drv-path' to show the output and
derivation paths of components, respectively (the latter replaces
the `--expr' query).
get rid of GC roots. Nix-build places a symlink `result' in the
current directory. Previously, removing that symlink would not
remove the store path being linked to as a GC root. Now, the GC
root created by nix-build is actually a symlink in
`/nix/var/nix/gcroots/auto' to `result'. So if that symlink is
removed the GC root automatically becomes invalid (since it can no
longer be resolved). The root itself is not automatically removed -
the garbage collector should delete dangling roots.
that they are deleted in an order that maintains the closure
invariant.
* Presence of a path in a temporary roots file does not imply that all
paths in its closure are also present, so add the closure.
roots to a per-process temporary file in /nix/var/nix/temproots
while holding a write lock on that file. The garbage collector
acquires read locks on all those files, thus blocking further
progress in other Nix processes, and reads the sets of temporary
roots.
promise :-) This allows derivations to specify on *what* output
paths of input derivations they are dependent. This helps to
prevent unnecessary downloads. For instance, a build might be
dependent on the `devel' and `lib' outputs of some library
component, but not the `docs' output.
* Formalise the notion of fixed-output derivations, i.e., derivations
for which a cryptographic hash of the output is known in advance.
Changes to such derivations should not propagate upwards through the
dependency graph. Previously this was done by specifying the hash
component of the output path through the `id' attribute, but this is
insecure since you can lie about it (i.e., you can specify any hash
and then produce a completely different output). Now the
responsibility for checking the output is moved from the builder to
Nix itself.
A fixed-output derivation can be created by specifying the
`outputHash' and `outputHashAlgo' attributes, the latter taking
values `md5', `sha1', and `sha256', and the former specifying the
actual hash in hexadecimal or in base-32 (auto-detected by looking
at the length of the attribute value). MD5 is included for
compatibility but should be considered deprecated.
* Removed the `drvPath' pseudo-attribute in derivation results. It's
no longer necessary.
* Cleaned up the support for multiple output paths in derivation store
expressions. Each output now has a unique identifier (e.g., `out',
`devel', `docs'). Previously there was no way to tell output paths
apart at the store expression level.
* `nix-hash' now has a flag `--base32' to specify that the hash should
be printed in base-32 notation.
* `fetchurl' accepts parameters `sha256' and `sha1' in addition to
`md5'.
* `nix-prefetch-url' now prints out a SHA-1 hash in base-32. (TODO: a
flag to specify the hash.)
bits, then encode them in a radix-32 representation (using digits
and letters except e, o, u, and t). This produces store paths like
/nix/store/4i0zb0z7f88mwghjirkz702a71dcfivn-aterm-2.3.1. The nice
thing about this is that the hash part of the file name is still 32
characters, as before with MD5.
(Of course, shortening SHA-256 to 160 bits makes it no better than
SHA-160 in theory, but hopefully it's a bit more resistant to
attacks; it's certainly a lot slower.)
* Start cleaning up unique store path generation (they weren't always
unique; in particular the suffix ("-aterm-2.2", "-builder.sh") was
not part of the hash, therefore changes to the suffix would cause
multiple store objects with the same hash).
profile. Arguments are either generation number, or `old' to delete
all non-current generations. Typical use:
$ nix-env --delete-generations old
$ nix-collect-garbage
* istringstream -> string2Int.
Previously there was the problem that all files read by nix-env
etc. should be reachable and readable by the Nix user. So for
instance building a Nix expression in your home directory meant that
the home directory should have at least g+x or o+x permission so
that the Nix user could reach the Nix expression. Now we just
switch back to the original user just prior to reading sources and
the like. The places where this happens are somewhat arbitrary,
however. Any scope that has a live SwitchToOriginalUser object in
it is executed as the original user.
* Back out r1385. setreuid() sets the saved uid to the new
real/effective uid, which prevents us from switching back to the
original uid. setresuid() doesn't have this problem (although the
manpage has a bug: specifying -1 for the saved uid doesn't leave it
unchanged; an explicit value must be specified).
* Builder output is written to standard error by default.
* The option `-B' is gone.
* The option `-Q' suppresses builder output.
The result of this is that most Nix invocations shouldn't need any
flags w.r.t. logging.
derivation disables scanning for dependencies. Use at your own
risk. This is a quick hack to speed up UML image generation (image
are very big, say 1 GB).
It would be better if the scanner were faster, and didn't read the
whole file into memory.
much as possible. (This is similar to GNU Make's `-k' flag.)
* Refactoring to implement this: previously we just bombed out when
a build failed, but now we have to clean up. In particular this
means that goals must be freed quickly --- they shouldn't hang
around until the worker exits. So the worker now maintains weak
pointers in order not to prevent garbage collection.
* Documented the `-k' and `-j' flags.
This is because the contents of these symlinks are not incorporated
into the hashes of derivations, and could therefore cause a mismatch
between the build system and the target system. E.g., if
`/nix/store' is a symlink to `/data/nix/store', then a builder could
expand this path and store the result. If on the target system
`/nix/store' is not a symlink, or is a symlink that points somewhere
else, we have a dangling pointer.
The trigger for this change is that gcc 3.3.3 does exactly that (it
applies realpath() to some files, such as libraries, which causes
our impurity checker to bail out.)
An annoying side-effect of this change is that it makes it harder to
move the Nix store to a different file system. On Linux, bind
mounts can be used instead of symlink for this purpose (e.g., `mount
-o bind /data/nix/store /nix/store').
writes to stderr:
- `pretty': the old nested style (default)
- `escapes': uses escape codes to indicate nesting and message
level; can be processed using `log2xml'
- `flat': just plain text, no nesting
These can be set using `--log-type TYPE' or the NIX_LOG_TYPE
environment variable.
Nix. This is to prevent Berkeley DB from becoming wedged.
Unfortunately it is not possible to throw C++ exceptions from a
signal handler. In fact, you can't do much of anything except
change variables of type `volatile sig_atomic_t'. So we set an
interrupt flag in the signal handler and check it at various
strategic locations in the code (by calling checkInterrupt()).
Since this is unlikely to cover all cases (e.g., (semi-)infinite
loops), sometimes SIGTERM may now be required to kill Nix.
path of the Nix expression to be used with the import, upgrade, and
query commands. For instance,
$ nix-env -I ~/nixpkgs/pkgs/system/i686-linux.nix
$ nix-env --query --available [aka -qa]
sylpheed-0.9.7
bison-1.875
pango-1.2.5
subversion-0.35.1
...
$ nix-env -i sylpheed
$ nix-env -u subversion
There can be only one default at a time.
* If the path to a Nix expression is a symlink, follow the symlink
prior to resolving relative path references in the expression.
nix-env -u foo.nix strategoxt
to replace the installed `strategoxt' derivation with the one from `foo.nix', if
the latter has a higher version number. This is a no-op if `strategoxt' is not
installed. Wildcards are also accepted, so
nix-env -u foo.nix '*'
will replace any installed derivation with newer versions from `foo.nix', if
available.
The notion of "version number" is somewhat ad hoc, but should be useful in most
cases, as evidenced by the following unit tests for the version comparator:
TEST("1.0", "2.3", -1);
TEST("2.1", "2.3", -1);
TEST("2.3", "2.3", 0);
TEST("2.5", "2.3", 1);
TEST("3.1", "2.3", 1);
TEST("2.3.1", "2.3", 1);
TEST("2.3.1", "2.3a", 1);
TEST("2.3pre1", "2.3", -1);
TEST("2.3pre3", "2.3pre12", -1);
TEST("2.3a", "2.3c", -1);
TEST("2.3pre1", "2.3c", -1);
TEST("2.3pre1", "2.3q", -1);
(-1 = less, 0 = equal, 1 = greater)
* A new verbosity level `lvlInfo', between `lvlError' and `lvlTalkative'. This is
the default for `nix-env', so without any `-v' flags users should get useful
output, e.g.,
$ nix-env -u foo.nix strategoxt
upgrading `strategoxt-0.9.2' to `strategoxt-0.9.3'
