Previously files in the Nix store were owned by root or by nixbld,
depending on whether they were created by a substituter or by a
builder. This doesn't matter much, but causes spurious diffoscope
differences. So use root everywhere.
E.g.
$ nix-build pkgs/stdenv/linux/ -A stage1.pkgs.perl --check
nix-store: src/libstore/build.cc:1323: void nix::DerivationGoal::tryToBuild(): Assertion `buildMode != bmCheck || validPaths.size() == drv->outputs.size()' failed.
when perl.out exists but perl.man doesn't. The fix is to only check
the outputs that exist. Note that "nix-build -A stage1.pkgs.all
--check" will still give a (proper) error in this case.
This was observed in the deb_debian7x86_64 build:
http://hydra.nixos.org/build/29973215
Calling c_str() on a temporary should be fine because the temporary
shouldn't be destroyed until after the execl() call, but who knows...
If repair found a corrupted/missing path that depended on a
multiple-output derivation, and some of the outputs of the latter were
not present, it failed with a message like
error: path ‘/nix/store/cnfn9d5fjys1y93cz9shld2xwaibd7nn-bash-4.3-p42-doc’ is not valid
This makes Darwin consistent with Linux: Nix expressions can't break
out of the sandbox unless relaxed sandbox mode is enabled.
For the normal sandbox mode this will require fixing #759 however.
Otherwise, since the call to write a "d" character to the lock file
can fail with ENOSPC, we can get an unhandled exception resulting in a
call to terminate().
Caused by 8063fc497a. If tmpDir !=
tmpDirInSandbox (typically when there are multiple concurrent builds
with the same name), the *Path attribute would not point to an
existing file. This caused Nixpkgs' writeTextFile to write an empty
file. In particular this showed up as hanging VM builds (because it
would run an empty run-nixos-vm script and then wait for it to finish
booting).
This is arguably nitpicky, but I think this new formulation is even
clearer. My thinking is that it's easier to comprehend when the
calculated hash value is displayed close to the output path. (I think it
is somewhat similar to eliminating double negatives in logic
statements.)
The formulation is inspired / copied from the OpenEmbedded build tool,
bitbake.
Rather than using $<host-TMPDIR>/nix-build-<drvname>-<number>, the
temporary directory is now always /tmp/nix-build-<drvname>-0. This
improves bitwise-exact reproducibility for builds that store $TMPDIR
in their build output. (Of course, those should still be fixed...)
Temporarily allow derivations to describe their full sandbox profile.
This will be eventually scaled back to a more secure setup, see the
discussion at #695
Nix reports a hash mismatch saying:
output path ‘foo’ should have sha256 hash ‘abc’, instead has ‘xyz’
That message is slightly ambiguous and some people read that statement
to mean the exact opposite of what it is supposed to mean. After this
patch, the message will be:
Nix expects output path ‘foo’ to have sha256 hash ‘abc’, instead it has ‘xyz’
- rename options but leav old names as lower-priority aliases,
also "-dirs" -> "-paths" to get closer to the meaning
- update docs to reflect the new names (old aliases are not documented),
including a new file with release notes
- tests need an update after corresponding changes to nixpkgs
- __noChroot is left as it is (after discussion on the PR)
Passing "--option build-repeat <N>" will cause every build to be
repeated N times. If the build output differs between any round, the
build is rejected, and the output paths are not registered as
valid. This is primarily useful to verify build determinism. (We
already had a --check option to repeat a previously succeeded
build. However, with --check, non-deterministic builds are registered
in the DB. Preventing that is useful for Hydra to ensure that
non-deterministic builds don't end up getting published at all.)
This reverts commit 79ca503332. Ouch,
never noticed this. We definitely don't want to allow builds to have
arbitrary access to /bin and /usr/bin, because then they can (for
instance) bring in a bunch of setuid programs. Also, we shouldn't be
encouraging the use of impurities in the default configuration.
If automatic store optimisation is enabled, and a hard-linked file in
the store gets corrupted, then the corresponding .links entry will
also be corrupted. In that case, trying to repair with --repair or
--repair-path won't work, because the new "good" file will be replaced
by a hard link to the corrupted file. We can catch most of these cases
by doing a sanity-check on the file sizes.
This removes the need to have multiple downloads in the stdenv
bootstrap process (like a separate busybox binary for Linux, or
curl/mkdir/sh/bzip2 for Darwin). Now all those files can be combined
into a single NAR.
This makes it consistent with the Nixpkgs fetchurl and makes it work
in chroots. We don't need verification because the hash of the result
is checked anyway.
The stack allocated for the builder was way too small (32 KB). This is
sufficient for normal derivations, because they just do some setup and
then exec() the actual builder. But for the fetchurl builtin
derivation it's not enough. Also, allocating the stack on the caller's
stack was fishy business.
Previously, pkg-config was already queried for libsqlite3's and
libcurl's link flags. However they were not used, but hardcoded
instead. This commit replaces the hardcoded LDFLAGS by the ones
provided by pkg-config in a similar pattern as already used for
libsodium.
Fixes https://github.com/NixOS/nixpkgs/issues/9504.
Note that this means we may have a non-functional /bin/sh in the
chroot while rebuilding Bash or one of its dependencies. Ideally those
packages don't rely on /bin/sh though.
This ensures that 1) the derivation doesn't change when Nix changes;
2) the derivation closure doesn't contain Nix and its dependencies; 3)
we don't have to rely on ugly chroot hacks.
In particular, hydra-queue-runner can now distinguish between remote
build / substitution / already-valid. For instance, if a path already
existed on the remote side, we don't want to store a log file.
Previously, to build a derivation remotely, we had to copy the entire
closure of the .drv file to the remote machine, even though we only
need the top-level derivation. This is very wasteful: the closure can
contain thousands of store paths, and in some Hydra use cases, include
source paths that are very large (e.g. Git/Mercurial checkouts).
So now there is a new operation, StoreAPI::buildDerivation(), that
performs a build from an in-memory representation of a derivation
(BasicDerivation) rather than from a on-disk .drv file. The only files
that need to be in the Nix store are the sources of the derivation
(drv.inputSrcs), and the needed output paths of the dependencies (as
described by drv.inputDrvs). "nix-store --serve" exposes this
interface.
Note that this is a privileged operation, because you can construct a
derivation that builds any store path whatsoever. Fixing this will
require changing the hashing scheme (i.e., the output paths should be
computed from the other fields in BasicDerivation, allowing them to be
verified without access to other derivations). However, this would be
quite nice because it would allow .drv-free building (e.g. "nix-env
-i" wouldn't have to write any .drv files to disk).
Fixes#173.
The following patch is an attempt to address this bug (see
<http://bugs.gnu.org/18994>) by preserving the supplementary groups of
build users in the build environment.
In practice, I would expect that supplementary groups would contain only
one or two groups: the build users group, and possibly the “kvm” group.
[Changed &at(0) to data() and removed tabs - Eelco]
Not substituting builds with "preferLocalBuild = true" was a bad idea,
because it didn't take the cost of dependencies into account. For
instance, if we can't substitute a fetchgit call, then we have to
download/build git and all its dependencies.
Partially reverts 5558652709 and adds a
new derivation attribute "allowSubstitutes" to specify whether a
derivation may be substituted.
Nixpkgs' writeTextAsFile does this:
mv "$textPath" "$n"
Since $textPath was owned by root, if $textPath is on the same
filesystem as $n, $n will be owned as root. As a result, the build
result was rejected as having suspicious ownership.
http://hydra.nixos.org/build/22836807
Hello!
The patch below adds a ‘verifyStore’ RPC with the same signature as the
current LocalStore::verifyStore method.
Thanks,
Ludo’.
>From aef46c03ca77eb6344f4892672eb6d9d06432041 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ludovic=20Court=C3=A8s?= <ludo@gnu.org>
Date: Mon, 1 Jun 2015 23:17:10 +0200
Subject: [PATCH] Add a 'verifyStore' remote procedure call.
This hook can be used to set system-specific per-derivation build
settings that don't fit into the derivation model and are too complex or
volatile to be hard-coded into nix. Currently, the pre-build hook can
only add chroot dirs/files through the interface, but it also has full
access to the chroot root.
The specific use case for this is systems where the operating system ABI
is more complex than just the kernel-support system calls. For example,
on OS X there is a set of system-provided frameworks that can reliably
be accessed by any program linked to them, no matter the version the
program is running on. Unfortunately, those frameworks do not
necessarily live in the same locations on each version of OS X, nor do
their dependencies, and thus nix needs to know the specific version of
OS X currently running in order to make those frameworks available. The
pre-build hook is a perfect mechanism for doing just that.
This hook can be used to set system specific per-derivation build
settings that don't fit into the derivation model and are too complex or
volatile to be hard-coded into nix. Currently, the pre-build hook can
only add chroot dirs/files.
The specific use case for this is systems where the operating system ABI
is more complex than just the kernel-supported system calls. For
example, on OS X there is a set of system-provided frameworks that can
reliably be accessed by any program linked to them, no matter the
version the program is running on. Unfortunately, those frameworks do
not necessarily live in the same locations on each version of OS X, nor
do their dependencies, and thus nix needs to know the specific version
of OS X currently running in order to make those frameworks available.
The pre-build hook is a perfect mechanism for doing just that.
This is because we don't want to do HTTP requests on every evaluation,
even though we can prevent a full redownload via the cached ETag. The
default is one hour.
This was causing NixOS VM tests to fail mysteriously since
5ce50cd99e. Nscd could (sometimes) no
longer read /etc/hosts:
open("/etc/hosts", O_RDONLY|O_CLOEXEC) = -1 EACCES (Permission denied)
Probably there was some wacky interaction between the guest kernel and
the 9pfs implementation in QEMU.
Thus, for example, to get /bin/sh in a chroot, you only need to
specify /bin/sh=${pkgs.bash}/bin/sh in build-chroot-dirs. The
dependencies of sh will be added automatically.
I'm seeing hangs in Glibc's setxid_mark_thread() again. This is
probably because the use of an intermediate process to make clone()
safe from a multi-threaded program (see
524f89f139) is defeated by the use of
vfork(), since the intermediate process will have a copy of Glibc's
threading data structures due to the vfork(). So use a regular fork()
again.
If ‘build-use-chroot’ is set to ‘true’, fixed-output derivations are
now also chrooted. However, unlike normal derivations, they don't get
a private network namespace, so they can still access the
network. Also, the use of the ‘__noChroot’ derivation attribute is
no longer allowed.
Setting ‘build-use-chroot’ to ‘relaxed’ gives the old behaviour.
chroot only changes the process root directory, not the mount namespace root
directory, and it is well-known that any process with chroot capability can
break out of a chroot "jail". By using pivot_root as well, and unmounting the
original mount namespace root directory, breaking out becomes impossible.
Non-root processes typically have no ability to use chroot() anyway, but they
can gain that capability through the use of clone() or unshare(). For security
reasons, these syscalls are limited in functionality when used inside a normal
chroot environment. Using pivot_root() this way does allow those syscalls to be
put to their full use.
I.e., not readable to the nixbld group. This improves purity a bit for
non-chroot builds, because it prevents a builder from enumerating
store paths (i.e. it can only access paths it knows about).
Especially in WAL mode on a highly loaded machine, this is not a good
idea because it results in a WAL file of approximately the same size
ad the database, which apparently cannot be deleted while anybody is
accessing it.
