Commit graph

107 commits

Author SHA1 Message Date
Eelco Dolstra
ab35cbd675 StaticEnv: Use std::vector instead of std::map 2021-11-04 15:03:34 +01:00
Andreas Rammhold
cae41eebff libexpr: remove matchAttrs boolean from ExprLambda
The boolean is only used to determine if the formals are set to a
non-null pointer in all our cases. We can get rid of that allocation and
instead just compare the pointer value with NULL. Saving up to
sizeof(bool) + platform specific alignment per ExprLambda instace.
Probably not a lot of memory but perhaps a few kilobyte with nixpkgs?

This also gets rid of a potential issue with dereferencing formals based on
the value of the boolean that didn't have to be aligned with the formals
pointer but was in all our cases.
2021-10-06 17:24:06 +02:00
Eelco Dolstra
8d4268d190 Improve error formatting
Changes:

* The divider lines are gone. These were in practice a bit confusing,
  in particular with --show-trace or --keep-going, since then there
  were multiple lines, suggesting a start/end which wasn't the case.

* Instead, multi-line error messages are now indented to align with
  the prefix (e.g. "error: ").

* The 'description' field is gone since we weren't really using it.

* 'hint' is renamed to 'msg' since it really wasn't a hint.

* The error is now printed *before* the location info.

* The 'name' field is no longer printed since most of the time it
  wasn't very useful since it was just the name of the exception (like
  EvalError). Ideally in the future this would be a unique, easily
  googleable error ID (like rustc).

* "trace:" is now just "…". This assumes error contexts start with
  something like "while doing X".

Example before:

  error: --- AssertionError ---------------------------------------------------------------------------------------- nix
  at: (7:7) in file: /home/eelco/Dev/nixpkgs/pkgs/applications/misc/hello/default.nix

       6|
       7|   x = assert false; 1;
        |       ^
       8|

  assertion 'false' failed
  ----------------------------------------------------- show-trace -----------------------------------------------------
  trace: while evaluating the attribute 'x' of the derivation 'hello-2.10'
  at: (192:11) in file: /home/eelco/Dev/nixpkgs/pkgs/stdenv/generic/make-derivation.nix

     191|         // (lib.optionalAttrs (!(attrs ? name) && attrs ? pname && attrs ? version)) {
     192|           name = "${attrs.pname}-${attrs.version}";
        |           ^
     193|         } // (lib.optionalAttrs (stdenv.hostPlatform != stdenv.buildPlatform && !dontAddHostSuffix && (attrs ? name || (attrs ? pname && attrs ? version)))) {

Example after:

  error: assertion 'false' failed

         at: (7:7) in file: /home/eelco/Dev/nixpkgs/pkgs/applications/misc/hello/default.nix

              6|
              7|   x = assert false; 1;
               |       ^
              8|

         … while evaluating the attribute 'x' of the derivation 'hello-2.10'

         at: (192:11) in file: /home/eelco/Dev/nixpkgs/pkgs/stdenv/generic/make-derivation.nix

            191|         // (lib.optionalAttrs (!(attrs ? name) && attrs ? pname && attrs ? version)) {
            192|           name = "${attrs.pname}-${attrs.version}";
               |           ^
            193|         } // (lib.optionalAttrs (stdenv.hostPlatform != stdenv.buildPlatform && !dontAddHostSuffix && (attrs ? name || (attrs ? pname && attrs ? version)))) {
2021-01-21 11:02:09 +01:00
Ben Burdette
9159dfe3d8 comments and cleanup 2020-06-30 16:31:55 -06:00
Ben Burdette
1d43a6e123 use plain errPos instead of nixCode; fix tests 2020-06-23 15:30:13 -06:00
Ben Burdette
e6f93b94fc Merge branch 'master' into caveman-LOCs 2020-06-18 13:07:53 -06:00
Eelco Dolstra
e14e62fddd Remove trailing whitespace 2020-06-15 14:12:39 +02:00
Eelco Dolstra
1fb762d11f Get rid of explicit ErrorInfo constructors 2020-06-15 14:06:58 +02:00
Ben Burdette
0e49de6a2b position for stdin, string; (string) for trace; fix tests 2020-05-21 14:28:45 -06:00
Ben Burdette
7c3138844c more pos reporting 2020-05-11 17:34:57 -06:00
Ben Burdette
e4fb9a3849 remove 'format' from Error constructor calls 2020-04-21 17:07:07 -06:00
Eelco Dolstra
55aa622fb1
Fix compatibility with latest boost::format 2018-03-14 19:25:09 +01:00
Jörg Thalheim
2fd8f8bb99 Replace Unicode quotes in user-facing strings by ASCII
Relevant RFC: NixOS/rfcs#4

$ ag -l | xargs sed -i -e "/\"/s/’/'/g;/\"/s/‘/'/g"
2017-07-30 12:32:45 +01:00
Eelco Dolstra
215b70f51e
Revert "Get rid of unicode quotes (#1140)"
This reverts commit f78126bfd6. There
really is no need for such a massive change...
2016-11-26 00:38:01 +01:00
Guillaume Maudoux
f78126bfd6 Get rid of unicode quotes (#1140) 2016-11-25 15:48:27 +01:00
Christian Theune
14ebde5289 First hit at providing support for floats in the language. 2016-01-05 00:40:40 +01:00
Eelco Dolstra
a9faa7bbce showId: Handle empty attribute names
We should probably disallow these, but until then, we shouldn't barf
with an assertion failure.

Fixes #738.
2015-12-17 15:15:28 +01:00
Eelco Dolstra
6bd2c7bb38 OCD: foreach -> C++11 ranged for 2015-07-17 20:13:56 +02:00
Eelco Dolstra
5badc8f975 Improve error message 2015-03-06 14:24:08 +01:00
Eelco Dolstra
6fec43ccb3 Remove quotes around filenames in position info 2015-01-07 12:08:10 +01:00
Eelco Dolstra
ecc2c8f464 Improve printing of ASTs 2014-10-20 09:13:21 +02:00
Eelco Dolstra
11849a320e Use proper quotes everywhere 2014-08-20 18:03:48 +02:00
Eelco Dolstra
373fad75e1 Add some color 2014-08-20 16:50:17 +02:00
Eelco Dolstra
d8c061e044 Remove ExprBuiltin
It's slower than ExprVar since it doesn't compute a static
displacement. Since we're not using the throw primop in the
implementation of <...> anymore, it's also not really needed.
2014-05-26 17:14:28 +02:00
Eelco Dolstra
a5fe730940 forceString: Show position info 2014-04-04 21:14:11 +02:00
Eelco Dolstra
8b31ffd10d Remove unnecessary quotes around file names 2014-04-04 18:59:29 +02:00
Eelco Dolstra
b72c8d2e5b Include position info in function application
This allows error messages like:

  error: the anonymous function at `/etc/nixos/configuration.nix:1:1'
    called without required argument `foo', at
    `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/lib/modules.nix:77:59'
2014-04-04 18:59:29 +02:00
Eelco Dolstra
ac6ceea764 Fix potential segfault
The newEnv variable was accessed (via the dynamicEnv) pointer after it
had gone out of scope.

Fixes #234.
2014-04-01 17:04:38 +02:00
Shea Levy
cd49fe4f9b Don't use any syntactic sugar for dynamic attrs
This doesn't change any functionality but moves some behavior out of the
parser and into the evaluator in order to simplify the code.

Signed-off-by: Shea Levy <shea@shealevy.com>
2013-12-31 23:56:26 +00:00
Shea Levy
18fefacf7d Dynamic attrs
This adds new syntax for attribute names:

* attrs."${name}" => getAttr name attrs
* attrs ? "${name}" => isAttrs attrs && hasAttr attrs name
* attrs."${name}" or def => if attrs ? "${name}" then attrs."${name}" else def
* { "${name}" = value; } => listToAttrs [{ inherit name value; }]

Of course, it's a bit more complicated than that. The attribute chains
can be arbitrarily long and contain combinations of static and dynamic
parts (e.g. attrs."${foo}".bar."${baz}" or qux), which is relatively
straightforward for the getAttrs/hasAttrs cases but is more complex for
the listToAttrs case due to rules about duplicate attribute definitions.

For attribute sets with dynamic attribute names, duplicate static
attributes are detected at parse time while duplicate dynamic attributes
are detected when the attribute set is forced. So, for example, { a =
null; a.b = null; "${"c"}" = true; } will be a parse-time error, while
{ a = {}; "${"a"}".b = null; c = true; } will be an eval-time error
(technically that case could theoretically be detected at parse time,
but the general case would require full evaluation). Moreover, duplicate
dynamic attributes are not allowed even in cases where they would be
with static attributes ({ a.b.d = true; a.b.c = false; } is legal, but {
a."${"b"}".d = true; a."${"b"}".c = false; } is not). This restriction
might be relaxed in the future in cases where the static variant would
not be an error, but it is not obvious that that is desirable.

Finally, recursive attribute sets with dynamic attributes have the
static attributes in scope but not the dynamic ones. So rec { a = true;
"${"b"}" = a; } is equivalent to { a = true; b = true; } but rec {
"${"a"}" = true; b = a; } would be an error or use a from the
surrounding scope if it exists.

Note that the getAttr, getAttr or default, and hasAttr are all
implemented purely in the parser as syntactic sugar, while attribute
sets with dynamic attribute names required changes to the AST to be
implemented cleanly.

This is an alternative solution to and closes #167

Signed-off-by: Shea Levy <shea@shealevy.com>
2013-12-31 20:59:49 +00:00
Shea Levy
136f2f7046 Add the ExprBuiltin Expr type to the AST
Certain desugaring schemes may require the parser to use some builtin
function to do some of the work (e.g. currently `throw` is used to
lazily cause an error if a `<>`-style path is not in the search path)
Unfortunately, these names are not reserved keywords, so an expression
that uses such a syntactic sugar will not see the expected behavior
(see tests/lang/eval-okay-redefine-builtin.nix for an example).

This adds the ExprBuiltin AST type, which when evaluated uses the value
from the rootmost variable scope (which of course is initialized
internally and can't shadow any of the builtins).

Signed-off-by: Shea Levy <shea@shealevy.com>
2013-12-31 17:45:47 +00:00
Eelco Dolstra
fc33fd86b7 Add a symbol __curPos that expands to the current source location
I.e. an attribute set { file = <string>; line = <int>; column = <int>; }.
2013-11-18 20:16:02 +01:00
Eelco Dolstra
c897bac549 Make function calls tail-recursive 2013-11-12 11:32:23 +00:00
Eelco Dolstra
7bdb85453d printStats(): Print the size of the symbol table in bytes 2013-10-08 15:37:08 +02:00
Eelco Dolstra
b1e3b1a4ac Treat undefined variable errors consistently
Previously, a undefined variable inside a "with" caused an EvalError
(which can be caught), while outside, it caused a ParseError (which
cannot be caught).  Now both cause an UndefinedVarError (which cannot
be caught).
2013-10-08 14:45:36 +02:00
Eelco Dolstra
6b47de580f Show the exact position of undefined variables
In particular, undefined variable errors in a "with" previously didn't
show *any* position information, so this should help a lot in those
cases.
2013-10-08 14:40:51 +02:00
Eelco Dolstra
221a2daf34 Merge VarRef into ExprVar 2013-10-08 14:24:53 +02:00
Eelco Dolstra
33972629d7 Fix whitespace 2013-09-02 16:29:15 +02:00
Shea Levy
afc6c1bad6 Simplify inherited attribute handling
This reduces the difference between inherited and non-inherited
attribute handling to the choice of which env to use (in recs and lets)
by setting the AttrDef::e to a new ExprVar in the parser rather than
carrying a separate AttrDef::v VarRef member.

As an added bonus, this allows inherited attributes that inherit from a
with to delay forcing evaluation of the with's attributes.

Signed-off-by: Shea Levy <shea@shealevy.com>
2013-08-26 11:31:56 +02:00
Eelco Dolstra
18a48d80a0 Show function names in error messages
Functions in Nix are anonymous, but if they're assigned to a
variable/attribute, we can use the variable/attribute name in error
messages, e.g.

while evaluating `concatMapStrings' at `/nix/var/nix/profiles/per-user/root/channels/nixos/nixpkgs/pkgs/lib/strings.nix:18:25':
...
2013-05-16 19:08:02 +02:00
Eelco Dolstra
0a623a10c7 * Allow a default value in attribute selection by writing
x.y.z or default

  (as originally proposed in
  https://mail.cs.uu.nl/pipermail/nix-dev/2009-September/002989.html).

  For instance, an expression like

    stdenv.lib.attrByPath ["features" "ckSched"] false args

  can now be written as

    args.features.ckSched or false
2011-07-13 12:19:57 +00:00
Eelco Dolstra
2b9e29b1c8 * Change the right-hand side of the ‘.’ operator from an attribute to
an attribute path.  This is a refactoring to support default values.
2011-07-06 12:28:57 +00:00
Eelco Dolstra
5637037802 * In the ‘?’ operator, allow attribute paths. For instance, you can
write ‘attrs ? a.b’ to test whether ‘attrs’ has an attribute ‘a’
  containing an attribute ‘b’.  This is more convenient than ‘attrs ?
  a && attrs.a ? b’.

  Slight change in the semantics: it's no longer an error if the
  left-hand side of ‘?’ is not an attribute set.  In that case it just
  returns false.  So, ‘null ? foo’ no longer throws an error.
2011-07-06 10:58:17 +00:00
Eelco Dolstra
e0b7fb8f27 * Keep attribute sets in sorted order to speed up attribute lookups.
* Simplify the representation of attributes in the AST.
* Change the behaviour of listToAttrs() in case of duplicate names.
2010-10-24 19:52:33 +00:00
Eelco Dolstra
41c45a9b31 * Store Value nodes outside of attribute sets. I.e., Attr now stores
a pointer to a Value, rather than the Value directly.  This improves
  the effectiveness of garbage collection a lot: if the Value is
  stored inside the set directly, then any live pointer to the Value
  causes all other attributes in the set to be live as well.
2010-10-22 14:47:42 +00:00
Eelco Dolstra
01e58adce0 * Store position info for inherited attributes. 2010-05-07 12:43:57 +00:00
Eelco Dolstra
84ce7ac76f * Store attribute positions in the AST and report duplicate attribute
errors with position info.
* For all positions, use the position of the first character of the
  first token, rather than the last character of the first token plus
  one.
2010-05-06 16:46:48 +00:00
Eelco Dolstra
0bc468f195 * Simplify the implementation of `with'. This gives a 7% speedup in
evaluating the NixOS system configuration.
2010-04-22 15:08:09 +00:00
Eelco Dolstra
d39d3c6264 * Implemented inherit. 2010-04-14 23:25:05 +00:00
Eelco Dolstra
81de12bc8f * Refactoring: move variable uses to a separate class. 2010-04-14 15:14:23 +00:00