* manual: Contributing -> Development, Hacking -> Building
what's currently called "hacking" are really instructions for setting up
a development environment and compiling from source. we have
a contribution guide in the repo (which rightly focuses on GitHub
workflows), and the material in the manual is more about working
on the code itself.
since we'd otherwise have three headings that amount to "Building Nix",
this change also moves the "classic Nix" instructions to the top.
we may want to reorganise this in the future, and bring
contributor-oriented information closer to the code, but for now let's
stick to more accurate names to ease navigation.
On some systems, previous usage of `match` may cause a stackoverflow
(presumably due to the large size of the match result). Avoid this by
(ab)using `replaceStrings` to test for containment without using
regexes, thereby avoiding the issue. The causal configuration seems to
be the stack size hard limit, which e.g. Amazon Linux sets, whereas most
Linux distros leave unlimited.
Match the fn name to similar fn in nixpkgs.lib, but different
implementation that does not use `match`. This impl gives perhaps
unexpected results when the needle is `""`, but the scope of this is
narrow and that case is a bit odd anyway.
This makes for some duplication-of-work as we do a different
`replaceStrings` if this one is true, but this only runs during doc
generation at build time so has no runtime impact.
See https://github.com/NixOS/nix/issues/11085 for details.
move together all syntactic and semantic information into one
page, and add a page on data types, which in turn links to the syntax and
semantics.
also split out the note on scoping rules into its own page.
Co-authored-by: Ryan Hendrickson <ryan.hendrickson@alum.mit.edu>
* doc: fix `directory` definition in nix-archive.md
Before the change the document implied that directory of a single entry
contained entry:
"type" "directory" "type" directory" "entry" ...
After the change document should expand into:
"type" "directory" "entry" ...
Co-authored-by: John Ericson <git@JohnEricson.me>
* string interpolation escape example
Make it easier to find the documentation, and the example might be enough for most cases.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
We don't apply any patches to it, and vendoring it locks users into
bugs (it hasn't been updated since its introduction in late 2021).
Closes https://git.lix.systems/lix-project/lix/issues/164
Change-Id: Ied071c841fc30b0dfb575151afd1e7f66970fdb9
(cherry picked from commit 80405d06264f0de1c16ee2646388ab501df20628)
* mention the actual meaning of FODs in the glossary
Co-authored-by: Alex Groleau <source@proof.construction>
Co-authored-by: Daniel Baker <daniel.n.baker@gmail.com>
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
* docs: fix python nix-shell example
This Python code snippet depended on Python 2 which has been marked as insecure in 24.05.
I modernized the example so new users will not be surprised upon copying and pasting the snippet for exploration.
Co-authored-by: John Ericson <git@JohnEricson.me>
This turns errors like:
error: flake output attribute 'hydraJobs' is not a derivation or path
into errors like:
error: expected flake output attribute 'hydraJobs' to be a derivation or
path but found a set: { binaryTarball = «thunk»; build = «thunk»; etc> }
This change affects all InstallableFlake commands.
Source: 20981461d4
Signed-off-by: Jörg Thalheim <joerg@thalheim.io>
* reword documentation on `nix-copy-closure`
- one sentence per line
- be more precise with respect to which Nix stores are being accessed
- make a clear distinction between store paths and store objects
- add links to definitions of terms
- clarify which machine is which
- --to and --from don't take arguments
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
The JSON format no longer uses the legacy ATerm `r:` prefixing nonsese,
but separate fields.
Progress on #9866
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
- add links to definitions of terms
- one sentence per line
- be more specific about which store is used for the import
- clearly distinguish store paths and store objects
- make a recommendation to use `nix-copy-closure` for efficient SSH transfers
Basically I'd expect the same behavior as with `nix-build`, i.e.
with `--keep-going` the hash-mismatch error of each failing
fixed-output derivation is shown.
The approach is derived from `Store::buildPaths` (`entry-point.cc`):
instead of throwing the first build-result, check if there are any build
errors and if so, display all of them and throw after that.
Unfortunately, the BuildResult struct doesn't have an `ErrorInfo`
(there's a FIXME for that at least), so I have to construct my own here.
This is a rather cheap bugfix and I decided against touching too many
parts of libstore for that (also I don't know if that's in line with the
ongoing refactoring work).
Closes https://git.lix.systems/lix-project/lix/issues/302
Change-Id: I378ab984fa271e6808c6897c45e0f070eb4c6fac
Signed-off-by: Jörg Thalheim <joerg@thalheim.io>
given `nix-copy-closure` exists, it doesn't make much sense to do
nix-store --export $paths | nix-store --import --store ssh://foo@bar
since that dumps everything rather than granularly transferring store
objects as needed.
therefore, pick an example where dumping the entire closure into a file
actually makes a difference, such as when deploying to airgapped systems.
In addition:
- Take the opportunity to add a bunch more missing hyperlinks, too.
- Remove some glossary entries that are now subsumed by dedicated pages.
We used to not be able to do this without breaking link fragments, but
now we can, so pick up where we left off.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
- add links to definitions of terms
- one sentence per line
- be more specific about which store is used for the import
- clearly distinguish store paths and store objects
- make a recommendation to use `nix-copy-closure` for efficient SSH transfers
the individual commands' documentation should provide enough examples to
make sense of the options and judge what to use and when. proper guides,
which would require a more elaborate setup to show off Nix's
capabilities are out of scope for the reference manual.
* doc: convention improvements for copying closure
use -P, which only considers executables but not shell builtins
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
pararameterisation is not actually needed the way things are currently
set up, and it confused me when trying to understand what the code does.
all but one test sources vars-and-functions.sh, which nominally only
defines variables, but in practice is always coupled with the actual
initialisation. while the cleaner way of making this more legible would
be to source variables and initialisation separately, this would produce
a huge diff.
the change requires a few small fixes to keep the tests working:
- only create test home directory during initialisation
that vars-and-functions.sh wrote to the file system seems not write
- fix creation of the test directory
due to statefulness, the test home directory was implicitly creating
the test root, too. decoupling that made it apparent that this was
probably not intentional, and certainly confusing.
- only source vars-and-functions.sh if init.sh is not needed
there is one test case that only needs a helper function but no
initialisation side effects
- remove some unnecessary cleanups and split parts of re-used test code
there were confusing bits in how initialisation code was repurposed,
which break if trying to refactor the outer layers naively...
* Document string context
Now what we have enough primops, we can document how string contexts
work.
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
Co-authored-by: Théophane Hufschmitt <7226587+thufschmitt@users.noreply.github.com>
Co-authored-by: Valentin Gagarin <valentin.gagarin@tweag.io>
Co-authored-by: Felix Uhl <iFreilicht@users.noreply.github.com>
